Paranoid Android Quartz 5 - OnePlus 7 Pro - OnePlus 7 Pro ROMs, Kernels, Recoveries, & Other D

Paranoid Android Quartz 5 - OnePlus 7 Pro - OnePlus 7 Pro ROMs, Kernels, Recoveries, & Other D

Device changelogs
Quartz 5
* DC Dimming support
* Improved adaptative brightness
Quartz 4
* Added support for only dim FOD icon(fixes random screen flickers)
* Updated arter's kernel to r58
* Improved adaptative brightness
* Fixed AAC codec support(finally!)
* Smoothness improvements
Quartz 3
* Reworked FOD implementation(no more flicker)
* Smoothness improvements
* Stability fixes
* Under the hood changes for a better experience
Quartz 2
* Vastly improved screen brightness(thanks to PeterClxy custom sensor HAL)
* Enabled VoLTE and VoWiFi for all supported carriers(no more carrier based restrictions).
* Added single tap to ambient display feature
* Fixed back and forward gesture reverse issue
Quartz 1
* Initial stable release
Beta 5
* Updated kernel to a newer version of arter´s kernel
* Improved dynamic screen refresh rate(less aggresive, non noticeable)
* Fixed issues with media playback files, mostly FLAC files
* Adapted UI for curved screen
* Improved Pop-Up camera implementation
* Improved smoothness response
* Updated telephony blobs(no more signal issues)
* Under the hood improvements for a much better experience
Beta 4
* Switched to arter97 kernel, specifically made for Paranoid Android(version 50)
* Implemented support for the high-end vibration motor
* Implemented dynamic screen refresh rate
* Alert Slider UX/UI improvements
* Improved FOD(fixed flickering too)
* Improved brightness
* Upgraded to chromium zlib (improves compression, decompression, PNG decoding, APK installing, and other performance across the board)
* Upgraded to GCC 9 for building kernel (improves performance)
* Added ANT+ support
* Added Hotword Enrollment (OK Google detection with screen off)
* Under the hood improvements for a much better experience
Beta 3
* No device related changes
Beta 2
* Added off-screen gestures
* Fixed battery draining issue
* Improved battery performance
* Improved smoothness
* Fixed some issues related to media
* Updated fingerprint on display management
* Under the hood changes for a better experience
Beta 1
* Selinux is now enforcing
* SafetyNet passes/works now
* Added Dolby Audio (UI is WIP)
* Added Lift To Wake
* Fixed WiFi hotspot
* Drastically improved smoothness
* Stability fixes
* Under the hood changes and fixes for a better experience
Alpha 3
* Fixed VoLTE
* Improved data network handling
* Stability fixes
* Under the hood changes for a better experience
Alpha 2
* Fixed NFC
* Added Dash/Warp Charge support
* Added QPerformance, UxPerformance
* Added aptX and aptXHD
* Serious smoothness improvements
* Stability fixes
* Under the hood changes for a better experience
Apha 1
* Initial release

Reserved

All right let's begin

Thanks for the release!
As for the GApps, better change the link from the test folder to the beta one: https://sourceforge.net/projects/opengapps/files/arm64/beta/

If I'm currently on OOS 10 Stable, rooted with TWRP and magisk installed, what would be the recommended flashing instructions?

Awesome!! I really want to try this one but SafetyNet is a must for me
I'll be ready once safetynet is ok

Just need to know what build I read to be on to flash this room is it ok to be on the open beta 2 to be able to flash this room?

NickMidd91 said:
Just need to know what build I read to be on to flash this room is it ok to be on the open beta 2 to be able to flash this room?
Click to expand...
Click to collapse
I flashed the stable OOS 10 twice before flashing the ROM. Worked!

sabrdawg said:
I flashed the stable OOS 10 twice before flashing the ROM. Worked!
Click to expand...
Click to collapse
Which twrp are u using, I try it now

greatbobbb said:
Which twrp are u using, I try it now
Click to expand...
Click to collapse
-70
I must say, this is a VERY solid ROM! Everything works great from the get go. No data or Bluetooth issues, no FCs, and Magisk 19.4 and TB worked like a charm. I think I'm going to stick with Paranoid Android for the time being ?

herna said:
We’re really excited to announce the release of Paranoid Android Quartz Alpha, based on Android 10.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. For those who are unfamiliar, Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhances the overall user experience. This time around he have his wallpaper app Abstruct, were you will be able to find all of the Paranoid Android wallpapers alongside a huge amount of amazing wallpapers.
The alpha builds include adjustments and improvements on top of the stock Android CAF base. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features.
Device-specific issues
NFC is broken(due to a last minute CAF tag update, will be solved in next alpha)
SafetyNet fails
Note: Custom kernels are NOT supported!
Download
Get the latest OnePlus 7 Pro build HERE.
Changelogs
Keep an eye on our Twitter account, @paranoidaospa , as we will be posting about new features getting included in the beta builds.
Paranoid Android Quartz Alpha released
Instructions & requirements
This device runs under OxygenOS vendor, make sure you are coming from OxygenOS 10 or flash it from twrp just before flashing PA package.
We highly recommend to use Mauronofrio 70 version of his recovery for flashing PA.
**Reboot to fastboot
**Fastboot boot TWRP
**Wipe Data
Reboot to fastboot
Fastboot boot TWRP
Install PA zip package
Reboot to fastboot
Fastboot boot TWRP
Install [optional] a Google Apps package of your choice is advisable, but stock and super variants are not recommended!!!)
We do recommend trying this gapps for the time being, DOWNLOAD GAPPS.
** Only required for the first flashing, and maybe optional.
Important / Useful links
OpenGapps
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Community (Telegram)
Help us improve PA by submitting good bug reports possibly with a log attached. Learn how to take logs here.
Our device maintainers for OnePlus 7 Pro is @herna. Mention (@) him if you need some assistance and/or when reporting bugs.
Cheers and #StayParanoid!
XDA:DevDB Information
Paranoid Android, ROM for the OnePlus 7 Pro
Contributors
herna
Source Code: https://github.com/Herna1994/android_kernel_oneplus_sm8150
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Alpha
Current Beta Version: Alpha 1
Beta Release Date: 2019-09-30
Created 2019-09-30
Last Updated 2019-09-30
Click to expand...
Click to collapse
I cannot get it to boot. I lose access to internal storage after installing the pa zip and fastboot twrp. When TWRP loads back up I cannot flash gapps or access any files on internal storage. Then I try to boot the rom and it just hangs at the spinning logo. Boot loop city. How did you all get this to boot?
---------- Post added at 04:49 AM ---------- Previous post was at 04:43 AM ----------
I cannot get the rom to boot with the provided instructions.

abduleo77 said:
I cannot get it to boot. I lose access to internal storage after installing the pa zip and fastboot twrp. When TWRP loads back up I cannot flash gapps or access any files on internal storage. Then I try to boot the rom and it just hangs at the spinning logo. Boot loop city. How did you all get this to boot?
---------- Post added at 04:49 AM ---------- Previous post was at 04:43 AM ----------
I cannot get the rom to boot with the provided instructions.
Click to expand...
Click to collapse
I flashed disable DM verity after flashing TWRP Installer, after the ROM. I then rebooted to bootloader and then booted TWRP, and THEN flashed gapps, and rebooted system

sabrdawg said:
I flashed the stable OOS 10 twice before flashing the ROM. Worked!
Click to expand...
Click to collapse
You facing any major bugs?

sabrdawg said:
I flashed disable DM verity after flashing TWRP Installer, after the ROM. I then rebooted to bootloader and then booted TWRP, and THEN flashed gapps, and rebooted system
Click to expand...
Click to collapse
Can you help me with a link please.

abduleo77 said:
Can you help me with a link please.
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389/amp/
---------- Post added at 05:23 AM ---------- Previous post was at 05:22 AM ----------
vrushank__ said:
You facing any major bugs?
Click to expand...
Click to collapse
None

sabrdawg said:
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389/amp/
---------- Post added at 05:23 AM ---------- Previous post was at 05:22 AM ----------
None
Click to expand...
Click to collapse
What about refresh rate? I can't seem to find it. Im assuming it ain't in yet

sabrdawg said:
I flashed disable DM verity after flashing TWRP Installer, after the ROM. I then rebooted to bootloader and then booted TWRP, and THEN flashed gapps, and rebooted system
Click to expand...
Click to collapse
Still not working for me. Everytime I do the last bootloader boot twrp, there are no files and my computer doesnt allow me to load an files.

abduleo77 said:
Still not working for me. Everytime I do the last bootloader boot twrp, there are no files and my computer doesnt allow me to load an files.
Click to expand...
Click to collapse
Adb push

my steps(oos10 stable)：
1.unlock bootloader
2.fastboot into twrp，wipe data, reboot to fastboot twrp
3.flash pa zip
4.reboot
but somehow it doesn't work, show fastboot ui every time I try booting
---------- Post added at 05:15 AM ---------- Previous post was at 04:47 AM ----------
I flash oos 10 twice before flash pa zip, it works

Related

[ROM][STABLE][R7S/R7Sf][Unofficial] CyanogenMod 13.0 - MM 6.0.1 (Qualcomm)

/* Changelog */
2016.12.11
- High Brightness Mode implemented (Taken from One Plus 3)
- LiveDisplay (aka Sunlight Enhancements) Implemented
- A better Automatic Display Brightness Curve (Taken from One Plus 3)
- Update to Android 6.0.1_r77 (Latest Android Marshmallow 6.0.1 release)
- includes Google November Security Update
- (Apparently No December Security Update from Google for Marshmallow this Month)
- Complete Kernel Rebase and Update to 3.10.104 ! (Latest stable)
- Audio Driver Updates
- build with latest UberTC 4.9 build
Older Changes:
20160527 - First Unofficial Stable Release
SeLinux set to Permissive
Kernel TuneUps and Optimizations for Cortex-A53/ARMv8 architecture
Disabled software CRCs on data blocks for 30% performance increase in I/O
Added support for Squids latest Lionfish Governor
Added device specific Vibration Patterns
Added device specific Notification Patterns
Added device specific Display Brightness settings
20160603 - Second Unofficial Stable release
Major Blob cleanup
Minor Kernel speedups and tunes
Removed Lionfish Governor for now due to upcoming cluster_plug inclusion
20160606
Cluster_Plug added! Thanks to @maniac103 ! Significantly increased battery life time!
WiFi Prima Driver Updated.
Note: I have noticed that 5Ghz Wifi is unstable. It might not affect you.
Looks like it depends on the router. If this is an issue for you. Switch from Automatic Mode to 2.4Ghz Mode in WiFi settings.
Or try switching the 5 Ghz channel to something higher like channel "100".
Hopefully this will be fixed in upcoming commits by the CM Team.
20160704
As of now there won't be any further Unofficial builds.
The next release will be an Official CyanogenMod build with nightly builds following, once all obstacles have been removed and approved.
There is no ETA. It will be done when it's done
20160822
I decided to push yet another update due to Quadrooter fixes.
Also countless changes and improvements have been made over the past three months.
Most important changes:
- Kernel upgraded to version 3.10.102 -Thanks mikeNG!
- Wifi Upgraded to LA.BR.1.2.6_rb1.14 which fixed Wifi Issues with Wifi-AC
(If you are still having issues with Wifi 5Ghz make sure you set your router to channel 44!)
- Binary Blobs Updated (especially GPU, GPS)
- New Audio Hal which also fixes "echo issue" when on call and active speakerphone.
- Quadrooter exploits patched!
- Countless other changes and improvements!
20160910
- includes Googles September security update
- msm8939: switch microarchitecture from generic to ARM Cortex-A53
- arm64: tune-up for Cortex-A53/ARMv8 architecture
- optimized arm64/crypto instructions
- added arm64 crc32 hw accelerated support
- using crypto instructions to generate AES key schedule (wifi)
- arm64: lib: use pair accessors for copy_*_user routines
- arm64: lib: improve copy_page to deal with 128 bytes at a time
- arm64: lib: memory utilities optimization
- disabled software-crc check due to arm64 crc32 hw accelerated support
- fix for GPS XTRA data
- fix for Notifications sounds disappearing while headphone plugged in
- build with latest UberTC 4.9 build
20161008
- Update to 6.0.1_r72 (Latest 6.0.1 release)
- includes Google October Security fixes
- Kernel Updated from 3.10.102 => 3.10.103 (Latest stable)
- Wifi Driver Updated to LA.BR.1.2.6_rb1.17 (Latest stable)
- Disabled cluster Plug, enabled Core_Ctl
- Rom build with DexPreopt
- Tweaks for a even smoother UI
- build with latest UberTC 4.9 build
2016.11.11
- High Brightness Mode implemented (Taken from One Plus 3)
- LiveDisplay (aka Sunlight Enhancements) Implemented
- A better Automatic Display Brightness Curve (Taken from One Plus 3)
- Update to Android 6.0.1_r74 (Latest Android Marshmallow 6.0.1 release)
- includes Google November Security Update
- Complete Kernel Rebase and Update to 3.10.104 ! (Latest stable)
All thanks and Credits to @mikeioannina
He managed to merge the working "project spectrum code" and parts of the "ColorOS code" on top of the latest CAF kernel code.
(3.10.104) This way you get the best of both!
- Dirty Cow Vulnerability fixed in this Kernel
Read more about it here
- Wifi Driver Updated to LA.BR.1.2.9_rb1.8 (Latest stable)
- build with latest UberTC 4.9 build

/* Additional Notes */
Want to stay stock but have ROOT?
You can simply install the latest ColorOS stock rom and use Chainfire's SuperSu Update.zip to acquire root.
Version 2.74 of SuperSu has been reported as working by @squall_20042001 .
Find SuperSu and further SuperSu information here

can i just install twrp on project spectrum instead of switch back to coloros before flashing the ROM?
---------- Post added at 03:00 PM ---------- Previous post was at 02:52 PM ----------
after reading your guide of twrp installation i m confused about the rooting section(twrp not possible in proj spec) and the bootloader unlocking section(thx to......fastboot command works in proj spec)
any futher explaination? really appreciate

stupidfellow1997 said:
can i just install twrp on project spectrum instead of switch back to coloros before flashing the ROM?
Click to expand...
Click to collapse
Unfortunately No. Because Oppo changed to much in Project Spectrum. The TWRP does not work for Project Spectrum.
I might build TWRP that is working for Project Spectrum one day. That is... if Project Spectrum ever gets a stable release. Its still full of bugs. It would be wasted time.
Believe me when i tell you, once you install my CyanogenMod build you don't want to go back to buggy Project Spectrum or ColorOS with its bloated apps that even prevent most basic features like notifications.

yeah...waited for a long time for your build
so thats mean i need to convert back to coloros and follow the guide you had given?

stupidfellow1997 said:
yeah...waited for a long time for your build
so thats mean i need to convert back to coloros and follow the guide you had given?
Click to expand...
Click to collapse
yes just follow the PDF Guide in the Link in the TWRP Thread, step by step and you will be good to go.
i did it countless times when porting and testing CyanogenMod.
you can also create a full TWRP backup once you have finished the guide and go back to restore that backup using TWRP whenever you wish to return to ColorOS

ok... now I m downloading the coloros stock ROM... I ll try install CM tomorrow
anyway...thx for your hard work...really appreciate

stupidfellow1997 said:
can i just install twrp on project spectrum instead of switch back to coloros before flashing the ROM?
---------- Post added at 03:00 PM ---------- Previous post was at 02:52 PM ----------
after reading your guide of twrp installation i m confused about the rooting section(twrp not possible in proj spec) and the bootloader unlocking section(thx to......fastboot command works in proj spec)
any futher explaination? really appreciate
Click to expand...
Click to collapse
if on PS the fastboot commands to flash TWRP will be returned as "unknown command. dt not found".
if you happen to find out that the latest Project Spectrum works by flashing the TWRP.
please feel free to write up a short guide for everyone.
i have not tested a "route" using the latest Project Spectrum roms.
my time was spend getting everything to work for CyanogenMod

celoxocis said:
if on PS the fastboot commands to flash TWRP will be returned as "unknown command. dt not found".
if you happen to find out that the latest Project Spectrum works by flashing the TWRP.
please feel free to write up a short guide for everyone.
i have not tested a "route" using the latest Project Spectrum roms.
my time was spend getting everything to work for CyanogenMod
Click to expand...
Click to collapse
tried it on latest proj spec... overwritten by default recovery~~
and you may get stucked in oppo logo~~

Got CM installed now , just setting everything up
One thing I have not been able to find is how to turn the individual sims on and off
There does not seem to be an option to toggle them on and off in the sim card settings

recovery in proj spec failed to flash your coloros ROM which given in the guide....
any idea?

stupidfellow1997 said:
recovery in proj spec failed to flash your coloros ROM which given in the guide....
any idea?
Click to expand...
Click to collapse
I think the Color OS pre rooted ROM needs to be flashed with TWRP

63holdenolden said:
I think the Color OS pre rooted ROM needs to be flashed with TWRP
Click to expand...
Click to collapse
What I meant is the original stock coloros...not the modified coloros made by celox... since celox came out the guide of flashing the old firmware of coloros before root and installing twrp...

just installed twrp...now trying your CM build
---------- Post added at 07:12 AM ---------- Previous post was at 06:40 AM ----------
just installed your build...work flawlessly on my phone.....thx celox

stupidfellow1997 said:
tried it on latest proj spec... overwritten by default recovery~~
and you may get stucked in oppo logo~~
Click to expand...
Click to collapse
that's the exact same thing happening to me when i tested it on the private project spectrum closed beta.
it's like they made those changes on purpose. to keep you out of installing TWRP.
63holdenolden said:
Got CM installed now , just setting everything up
One thing I have not been able to find is how to turn the individual sims on and off
There does not seem to be an option to toggle them on and off in the sim card settings
Click to expand...
Click to collapse
you can turn them on and off in the settings menu. i saw the option when i was porting/testing.
it should be there. im using a sdcard atm and no second sim. so i can check where exactly.
stupidfellow1997 said:
recovery in proj spec failed to flash your coloros ROM which given in the guide....
any idea?
Click to expand...
Click to collapse
i think this is a project spectrum issue. i saw in the beta forums that this _could_ happen to some people.
which project spectrum version are you on? were you able to go back to coloros?
if yes, how? share your way. i will add it up into the faq for others.
stupidfellow1997 said:
just installed twrp...now trying your CM build
---------- Post added at 07:12 AM ---------- Previous post was at 06:40 AM ----------
just installed your build...work flawlessly on my phone.....thx celox
Click to expand...
Click to collapse
it should work flawless on every r7s.
i test every of my builds before i release it. should you find something that is not working. let me know!
my custom build NAS box, which i use for compiling. is already compiling the next build.
every build takes about 16 hours of compiling but it's running 24/7 anyway

celoxocis said:
you can turn them on and off in the settings menu. i saw the option when i was porting/testing.
it should be there. im using a sdcard atm and no second sim. so i can check where exactly.
Click to expand...
Click to collapse
I think the missing individual sim toggle on\off may be a CM 13 issue after doing a bit of research , I'll keep searching the settings as it's not in the sim card settings menu
Other than that I am loving it so smooth and fast
Thanks for all your hard work and effort :good:

i think the gestures for the music has bug...
cuz when i want to turn the next track it glitch... in fact the song is playing for a few seconds(the first few second is skipped)

stupidfellow1997 said:
i think the gestures for the music has bug...
cuz when i want to turn the next track it glitch... in fact the song is playing for a few seconds(the first few second is skipped)
Click to expand...
Click to collapse
yes i've noticed that too. but that's a CM bug. that's nothing i can change, it is up to CM.
i don't use gestures so i just disabled it via "Developer Options"> "Block Gestures" because i have found no way to disable the "Music Player Gestures"

celoxocis said:
yes i've noticed that too. but that's a CM bug. that's nothing i can change, it is up to CM.
i don't use gestures so i just disabled it via "Developer Options"> "Block Gestures" because i have found no way to disable the "Music Player Gestures"
Click to expand...
Click to collapse
try poweramp...it didnt have the issue...
quite strange... it has the bug on stock music player and most of the third party music player but work flawlessly on poweramp~~??
Sent from my R7sf using XDA-Developers mobile app

[ROM][UNOFFICIAL][09/06][7.1.2] VertexOS for Mido

Downloads
Releases-
VertexOS-Carbide-v3.2-UNOFFICIAL-20170609-mido.zip (479 MB)
VertexOS-Carbide-v3.3-UNOFFICIAL-20170712-mido.zip
Firmware-
Here
Gapps-
OpenGApps

FAQ
FAQ and Known Issues.
->ROM is based on?
Roms is Based was AOSP-CAF now its fully rebased to pure CAF with few lineage elements.
->OTA Support?
Not yet.
->Can I dirty flash over previous builds?
Yes but you may face some issues.
->Is it Pre-rooted?
NO.
->Does this ROM Support Substratum/CMTE?
Yes, full substratum support!
-Which Gapps are recommended?
OpenGapps or
DynamicGapps
-Will this ROM relock the bootloader?
No.
-What about XPOSED?
XPOSED For N is not out yet. Still in Development. We like Xposed but it messes up with the system so before giving any bug reports make sure you have xposed uninstalled.
->When Will Be the Next Update?
No ETAs please. ROM Will be updated whenever the new build is ready.
->I am facing FCs, Bugs,Some feature is broken?
Provide Full info About your problem with logcats and the procedure to reproduce it.
->How to take Logcats?
https://goo.gl/UcTM9
->Selinux Linux mode changer app is not working nor Busy Box installer app is working.
Nothing related to our ROM, but it must work for most of the users it worked fine.
->I want to contribute To the Development of this ROM?
Join our slack community: Message me .
Join me at telegram : TG ID : mindfreeze
3. F2FS-compatible?
- It should work, but I don’t give support for any strange issues caused by it.
4. Changelogs?
- Please check my commits on Github or the changelogs section in Settings->About Phone.
5. What is EAS?
- https://developer.arm.com/open-sourc...are-scheduling
6. Feature requests?
- Please bring feature requests to the VertexOS Slack group. I would appreciate it if you send me commits for genuinely meaningful additions, bug fixes, and optimizations. I prefer features that can be implemented without needing a toggle. Please take note that I don't want to pack this ROM with a ton of features. There are many feature-rich ROMs out there already.
7. Passes SafetyNet?
- Yes. If you want root, use Magisk and enable Magisk Hide. SafetyNet failures may also occur because ADB is enabled.
8. Custom toolchains?
- I build Zenith kernel with Linaro TC 6.3.1.
9. Does VertexOS work with other GApps, TWRPs, firmwares, SU, kernels, tweaks, Viper4Android, etc?
- Please feel free to try, but I may not give support for issues caused.
10. Deep sleep issues?
- Reboot or clean flash.
11. Mobile network issues?
- Toggle airplane mode to see if it fixes the problem. Please check your APN and Preferred Network Type in Mobile Network Settings. If your APN is missing, please share the APN you want me to add.
12. Google Camera / OP3T front camera doesn't work?
- You'll need HAL3 enabled. VertexOS has HAL1 enabled by default. To enable HAL3 please flash the HAL3 Enabler. This may also fix front camera issues for OP3T. Be warned that you will lose OnePlus Camera functionality when you go HAL3.
13. Trustzone or Assert failed error 7?
You're using an incompatible firmware.
14. Why is the security patch in "About phone" outdated?
This ROM tracks CAF, which lags behind AOSP by a bit. However, you shouldn't be worried about this because CAF brings in the latest security commits even when the stated security patch level in "About phone" is outdated. Trust me, I've compared the commits of our CAF tag with the latest AOSP branch commits, and also with the Android Security Bulletin. Please just wait patiently for CAF to update the security patch string. I can easily change it and 'cheat' you guys, but I'm never going to do such a thing. So please be patient and know that your device has the security patches.
15. Creating unofficial builds of VertexOS
I have no qualms with it. If your builds are public, please do the following:
* Share proper links to the sources you used
* Provide clear credits to me
* Do NOT ask for donations
If you want to port and maintain VertexOS for another device in the longer term, send me a PM and we can discuss more.
16. Facing odd drains and issues with apps (message notifications not showing)?
* Stop restoring them with Titanium Backup
* Stop using hacky tweaks
17. Google Play Services drains?
* Clean flash
* Stop restoring everything with Titanium Backup
18. Losing Magisk root?
* Don't enable the BusyBox option
WHATS WORKING ??
ALL WORKING FINE.
Bugs.
If you encounter a bug please report with proper LOGCAT

[ROM][UNOFFICIAL][09/06][7.1.2] VertexOS Carbide v3.2 for Mido
SS Attached

Screenshots please!

Nice

thedevilashish said:
Screenshots please!
Click to expand...
Click to collapse
Check screenshots tab. Added

Have you stopped working on lineage os 13???

more CAF based ROM. great to see such a development here.

ayush.gl said:
Have you stopped working on lineage os 13???
Click to expand...
Click to collapse
Wrong thread bruh. And please don't keep reminding me, I'll update when I have time.

Thanks for bringing this .

Very Smooothhhhhhhhhhhhhhhhhhhhhh Rom! thanks @Vidhanth !
Could I request a feature please? *option to hide inactive sim icon*
[email protected]

Nice, I will try it.

ugene1980 said:
Very Smooothhhhhhhhhhhhhhhhhhhhhh Rom! thanks @Vidhanth !
Could I request a feature please? *option to hide inactive sim icon*
[email protected]
Click to expand...
Click to collapse
Thanks for feedback! And sorry, I don't do feature requests. Read the op and FAQ properly and you'll know where to ask

Vidhanth said:
Thanks for feedback! And sorry, I don't do feature requests. Read the op and FAQ properly and you'll know where to ask
Click to expand...
Click to collapse
How long is first boot? its been like 5 minutes
Firmware Flash + Clean flash + gapps

asusm930 said:
How long is first boot? its been like 5 minutes
Firmware Flash + Clean flash + gapps
Click to expand...
Click to collapse
Its normal first boot always gives Heart Attack....

asusm930 said:
How long is first boot? its been like 5 minutes
Firmware Flash + Clean flash + gapps
Click to expand...
Click to collapse
Did it ever boot up? Same happened to me.
Sent from my Redmi Note 4 using XDA Labs

By far the best ROM for Redmi Note 4 have been using it for the last week stable AF
Also one of the best wallpaper sets of any ROM by far super smooth with zero lag optimized clean and simple.
Kudos to the developer for making this ROM available for our device

sakhura said:
By far the best ROM for Redmi Note 4 have been using it for the last week stable AF
Also one of the best wallpaper sets of any ROM by far super smooth with zero lag optimized clean and simple.
Kudos to the developer for making this ROM available for our device
Click to expand...
Click to collapse
how long did it take for 1st boot? It's been 10 minutes for me now
---------- Post added at 07:47 PM ---------- Previous post was at 07:46 PM ----------
Vidhanth said:
Thanks for feedback! And sorry, I don't do feature requests. Read the op and FAQ properly and you'll know where to ask
Click to expand...
Click to collapse
how long is 1st boot?

asusm930 said:
how long did it take for 1st boot? It's been 10 minutes for me now
---------- Post added at 07:47 PM ---------- Previous post was at 07:46 PM ----------
how long is 1st boot?
Click to expand...
Click to collapse
I flashed it and waited for 25 mins back to JDC aosp now.
Edit- @op Can you help us please.

[OFFICIAL][8.1.0] VIPER OS [whyred]

Instructions
1. Download the ROM
2. Download GAPPS
3. Go to recovery and TAKE A NANDROID BACKUP
4. WIPE SYSTEM,DATA,CACHE AND DALVIK CACHE if coming from any other ROM. When i post updates wipe only cache and dalvik cache
5. Flash ROM, GAPPS(flashing gapps is a must as of now) and magisk installer if you want playstore as certified
6. Reboot
-UPDATE INSTRUCTIONS-
- Download latest build & gapps.
- Boot into latest TWRP.
- Wipe dalvik cache, cache
- Flash the ROM
- Reboot device & enjoy the candy
Credits & Thanks:
All ViperOS Team:
Ground Zero Rom's Team
CypherOS Team (AOSCP)
Dirty Unicorns Team
LineageOS Team
DarkKat ROM
And all other open source Devs/Teams I may have missed!
Donate For ViperOS:
Donate from PayPal
Sources
Device Tree
Kernel Tree Thanks to @akhilnarang
ROM
Media links
Google+ community
Telegram channel
Telegram chat
[B]Thanks /credits
@Shahan_mik3 and @@vasishath for their hard work on this device.
REMINDER
If you're having issues and want to submit a report (Logcat) please make sure you are reporting from the stock kernel, not a modified kernel. Modified kernels can break or fix, even improve things. It depends. I can't get a full clue of the issue when you're not running the original kernel.
Click to expand...
Click to collapse
Your bug report MUST contain the following information
Code:
Phone Informations
*Viper OS version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous unofficial Viper build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
Along with that IT MUST contain log files. if you don't know how to take them then follow this
If it is a random reboot, grab kmsg/dmesg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
google how to do it!!!
Lastly if you like my work and if you think i should be doing more kindly donate to me. ALl money will be gone to servers and investing in projects!!
Donation link - Donate to me/Click here for paytm donations
Always remember donations is anything but a necessity!!
XDA:DevDB Information
Viper OS for whyred, ROM for the Xiaomi Redmi Note 5 Pro
Contributors
Ayan Uchiha Choudhury
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Redmi Note 5 pro
Version Information
Status: Stable
Created 2018-07-21
Last Updated 2019-01-18

Changelogs
CHANGELOG
toxyc-whyred-20180727-v2.0-OFFICIAL
Added camera2api switch
Navigation Bar visible on boot
Click here for more info
toxyc-whyred-20180812-v3.0-OFFICIAL
August Security Patch.
Updated all GZOSP base source.
Round system icons by default.
Design improvements ToxycOS.
Android P style volume panel.
Rounded UI (Corners, QS, Notifications).
Data network enhancements.
Updates to themes.
More Translations pt-br and tr.
Added VoLTE icon.
Added QS color support as accent.
Clock Widget Size Enhancements.
Added QS Caffeine, Reboot / Recovery and Screenshot.
Tab "About" added ".
TurboPower charging cradle.
Added volte for all carriers
Added Codex Updator(This HOWEVER DOES NOT WORK YOU WILL NEED TO FLASH LATEST CODEX KERNEL TO MAKE IT WORK, I WILL FIX IT IN NEXT UPDATE)
Building with Clang7
Added 1+3 doze
Added MIUICamera
toxyc-whyred-20180819-v3.1-OFFICIAL
Fixed color in longpress notification.
Added New default wallpaper.
LeanLauncher replaced for Lawnchair v1 final.
Codex Kernel Updated
Codex Updator fixed
Viper-whyred-20181118-v5.0-OFFICIAL.zip
Initial Build of Viper for whyred
Kernel Changed to derp
Codex Updator removed
Viper-whyred-20181207-v5.0-OFFICIAL.zip
Dec Update merged
Updated Derp Kernel
Viper-whyred-20181217-v5.1-OFFICIAL.zip
Update source base LineageOS
December security patch
Android 8.1.0_r52
Added icon VoLTE
Remove upper left X icon on mobile signal.
Viper-whyred-20190118-v5.2-OFFICIAL.zip
Updated security patch 2019-01
Added toggle for 4G/LTE

Reserved

Thanks! Will try soon.

thread live. Great downloaded already. will try it soon

New Update is out, kindly check download link from OP and changelog from here. OTA should work from hence forth as we are going official guys!!!

Screenshots?

will flash in next release.
Thanks

Is it safe..?
I'm in 9.5.19.0 stable how to flash the ROM please tell me instructions...

Kalyan8106 said:
I'm in 9.5.19.0 stable how to flash the ROM please tell me instructions...
Click to expand...
Click to collapse
Unlock Bootloader
Flash TWRP
Assuming you have already done that
Wipe Cache/Data/System/Dalvik
Flash rom
Flash gapps if applicable
Flash Magisk (for root)
Reboot
Cheers

shrayv said:
ARB does not matter for custom rom.
Cheers
Click to expand...
Click to collapse
Flash it just like always..?
---------- Post added at 03:11 PM ---------- Previous post was at 03:09 PM ----------
shrayv said:
Unlock Bootloader
Flash TWRP
Assuming you have already done that
Wipe Cache/Data/System/Dalvik
Flash gapps if applicable
Reboot
Cheers
Click to expand...
Click to collapse
What about vendor..?

Kalyan8106 said:
Flash it just like always..?
---------- Post added at 03:11 PM ---------- Previous post was at 03:09 PM ----------
What about vendor..?
Click to expand...
Click to collapse
No need to wipe vendor.
Cheers

shrayv said:
No need to wipe vendor.
Cheers
Click to expand...
Click to collapse
Thank you

Latest Toxyc Build is out. Kindly check OP for download list and 2nd post for changelog. You can also check for updator app!!

Is qs have blue font?

raymondsanusi said:
Is qs have blue font?
Click to expand...
Click to collapse
yeah it does. depends on fonts mostly

Ayan Uchiha Choudhury said:
yeah it does. depends on fonts mostly
Click to expand...
Click to collapse
Can we disable it?

anshsharma123 said:
Screenshots?
Click to expand...
Click to collapse
added

launcher issue
Ayan Uchiha Choudhury said:
Latest Toxyc Build is out. Kindly check OP for download list and 2nd post for changelog. You can also check for updator app!!
Click to expand...
Click to collapse
flashed toxic os v3 but my lean launcher force close agin and again

dkdas2424 said:
flashed toxic os v3 but my lean launcher force close agin and again
Click to expand...
Click to collapse
Kindly provide logs this is needed. This is an issue with a few but nobody gives logs. As long as you don't give logs I can't help. A round about is using gapps mini and use Google launcher

LIQUID REMIX [9.0 PIE] [OFFICIAL] for WHYRED

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to LIQUIDREMIX! LiquidRemix is a New age mix of all the best ROMs of today with added essence from the older days. Android 9.0 project based from the old lead dev of LiquidSmooth, @Liquid0624, along with @VenkatVV, and community contributors! All features are open source and will stay that way as the community is the most important thing to our project! We enjoy bringing the Android community these ROMs and Kernels for Redmi Note 5 Pro; we sincerely hope that you can all enjoy the ROMs as much as we enjoy bringing them to you.
Our Android Development Team is very end user oriented; we care about what you want and bringing it to you. We do as much as we can to keep our users happy while primarily focusing the aims on stability, speed, optimizations, other additions and features that complement the ROMs as well as some frequently requested user add-ons.
Have any questions, comments or concerns? We would love to hear from you and keep our users happy, improve where possible when criticized or when bugs are found. Please; let us know on either XDA or TELEGRAMhttps://t.me/LiquidRemixChat (Our team checks telegram much more often and in live time, also many people including other users often are willing to help provide support.) Without all of you; we wouldn’t be a team or a community. Together YOU ALL are the family that keeps Android Development alive!
Feel free to join our Telegram Chat! Click Here
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
While our ROMs and kernels are tested prior to release for stability, to help prevent any major problems, the following is just a disclosure. Using any rooted features, ROMs or modifications, is at your own risk. We are not to be held responsible for any damages that may be encountered or any warranties voided by rooting a device etc...
A HUGE WARNING BEFORE YOU FLASH THIS
if you are in the anti roll back versions kindly BE WARNED. While it is safe to flash it on anti flash version 4, make sure you do not do something which you do not understand. ASK if you feel anything you are not understanding or is NOT directly said in the op. if you do not know your anti flash version go to fastboot and type the following line
Code:
fastboot getvar anti
It is safe to flash CUSTOM ROMs in anti roll back versions, but being safe than sorry!! Other members or I will definitely help you. Just don't ask things clearly mentioned in the OP. ;-)
ROM - DOWNLOAD HERE/mirror link
GAPPS - OPEN GAPPS (kindly use the nano version)
Magisk Manager - Here
Substratum key - Download this if you want substratum to work!!
1. Download the ROM
2. Download GAPPS
3. Go to recovery and TAKE A NANDROID BACKUP
4. WIPE SYSTEM,DATA,CACHE AND DALVIK CACHE if coming from any other ROM. When i post updates wipe only cache and dalvik cache
5. Flash ROM, GAPPS and magisk installer if you want playstore as certified
6. Reboot
BUGS
Not really anything i could notice
ROM - Liquid Remix
Kernel - Kernel Tree
luca020400
LuK1337
darkobas
Google (For AOSP)
Jayrod (Wallpaper)
Lineage OS (Rom Base)
Also a huge thanks to the pixel experience team for their trees without which it was basically impossible for me!!!! a huge thanks to him!!
Your bug report MUST contain the following information
Code:
Phone Informations
*Liquid Remix OS version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous unofficial liquid build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
Along with that IT MUST contain log files. if you don't know how to take them then follow this
If it is a random reboot, grab kmsg/dmesg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
google how to do it!!!
Lastly if you like my work and if you think i should be doing more kindly donate to me. ALl money will be gone to servers and investing in projects!!
Donation link - Donate to me/Click here for paytm donations
Always remember donations is anything but a neccessity!!
XDA:DevDB Information
Liquid OS WHYRED, ROM for the Xiaomi Redmi Note 5 Pro
Contributors
Ayan Uchiha Choudhury
Source Code: https://github.com/LiquidRemix
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Redmi Note 5 pro PIE FIRMWARE
Based On: Lineage/AOSP
Version Information
Status: Stable
Created 2018-09-12
Last Updated 2019-08-22

Changelogs
CHANGELOG
liquid_remix-10.0-20180917-UNOFFICIAL-whyred.zip
Liquid Lounge and it's all specifications are added finally!!
Many QS tiles are added finally
liquid_remix-10.0-20180925-UNOFFICIAL-whyred.zip
fixed youtube 1080p60 crash
fixed Facebook crash
UI feels faster
updated to lastest liquid sources
goodix fix integrated
liquid_remix-10.0-20180929-OFFICIAL-whyred.zip
Added call recording(check it please)
Updated liquid sources
liquid_remix-10.0-20181004-OFFICIAL-whyred.zip
Oct Update
3 finger screenshot
advanced reboot does actually something
liquid_remix-10.0.1-20181013-OFFICIAL-whyred.zip
added Pixel 3 GCam(camera2api turned on by default). Here only the slomo is not working. rest are a little choppy since these are test builds but should work just fine!!
Added Pixel 2 haptics
Merged all latest LR Sources
liquid_remix-10.0.1-20181024-OFFICIAL-whyred.zip
Derp Kernel Updated to 162.
Synced with latest LR sources
Google Pixel's now playing action fully working(PLEASE SET THE SCAN INTERVAL TO ATLEAST 1 MIN otherwise your battery drain will be huge
Google camera updated to beta 2 version. It is slightly choppy but photos are getting saved. The front camera works ONLY in INDIAN variant
liquid_remix-10.0.1-20181113-OFFICIAL-whyred.zip
Derp Kernel Updated to 163
Builds now enforcing!! Should be stable though!! This is thanks to @akhilnarang
Updated GCAM
November update
Rest of the changes are here
liquid_remix-10.0.1-20181123-OFFICIAL-whyred.zip
Gcam is updated to latest version
MiuiCamera is fixed
Bootloop issues should be fixed(i honestly tried this for days before i released this no bugs)
Rest of the changes are found here
liquid_remix-10.0.2-20181204-OFFICIAL-whyred.zip
Updated Gcam
Updated Derp Kernel
Dec Patch
Rest of the changes here
liquid_remix-10.0.3-20181224-OFFICIAL-whyred.zip
Derp Kernel Updated
Made Permissive
Added FM
Offline Charging works fine
Fixed a few FCs
Rest of the changes made here
liquid_remix-10.0.4.20190110-OFFICIAL-whyred.zip
January Security Patch included
THE WIFI AND HOTSPOT BUG IS FINALLY FIXED. Thanks again to @Rashedsahaji
Rest of the changelog you can find here and rest go to github!!
liquid_remix-10.0.4.20190118-OFFICIAL-whyred.zip
Miracast is now working
Wobbly network connection fixed
Night light seems to be working
Clang updated to 8.0.6
liquid_remix-10.0.4.20190123-OFFICIAL-whyred.zip
Final Update
F2FS support added by default
Rest of the changes here
liquid_remix-10.0.9-20190619-OFFICIAL-whyred.zip
June 2019 security patch
Permissive build
Detailed changelog here
liquid_remix-10.0.10-20190721-OFFICIAL-whyred.zip
July Security patch
Check the github for the more changes
liquid_remix-10.0.10-20190813-OFFICIAL-whyred.zip
August security patch

Reserved

Keeping 1 more for reserved!!

What kind of features added? Could you post some Screenshots?

desmoloch said:
What kind of features added? Could you post some Screenshots?
Click to expand...
Click to collapse
as of now it is absolutely bare stock, but features will be slowly added

Awesome
Thanks for the ROM.
Btw, wifi cast works ?
Oh
Dev, this rom sucks

latest update is out guys!!! This update is a big one and screenshots are added to the tab!! Kindly CLEAN FLASH to get the best results!!! Download link is in OP and changelog in 2nd post

Ayan Uchiha Choudhury said:
latest update is out guys!!! This update is a big one and screenshots are added to the tab!! Kindly CLEAN FLASH to get the best results!!! Download link is in OP and changelog in 2nd post
Click to expand...
Click to collapse
Is there the possibility to add the icon of brightness on the quick settings in last update?
Anyway thank you for this awesome ROM, really appreciate it

Great job. OP, is VoLTE icon available in status bar?

Smartbar available?
And is it possible to have custom recent like oreo? Slim or omniswitch..
P Recent style is not helpful at all..
Thanks

Is it has sim card disabling feature?

dustmalik said:
Great job. OP, is VoLTE icon available in status bar?
Click to expand...
Click to collapse
Nope
raymondsanusi said:
Smartbar available?
what is that? if you mean OP gestures that is there
And is it possible to have custom recent like oreo? Slim or omniswitch..
P Recent style is not helpful at all..
as of now nope
Thanks
Click to expand...
Click to collapse
ghanipradita said:
Is it has sim card disabling feature?
Click to expand...
Click to collapse
you will need to find that out since i don't have sim in whyred any more

I have some bugs to report. If fixable please fix-
1) Your internal system has some problem bug(bug already mention in OP)
2) Pie gestures are buggy and it says swipe on left or right which can be confused with miui gestures instead of op gestures.
3) If gestures are enabled, it doesnt automatically hide navbar. Navbar appears over the gestures after a while(cant see the back button on navbar after this reappearance)
4) Face unlock doesnt work(with c2api)so cant check auto face unlock feature
5)Fingerprint authentication vibration option should not be in navigation options. Also the option turns itself off when you go back to the settings page
6) Slide on navbar to control brightness doesnt work. It doesnt have any effect till halfway and after that the screen just dims itself even further
7) When clock is shifted to the right, it leaves a disturbing space between the first notification icon and the left end of the screen
8) Camera2Api works fine. miui cam crashes when c2api is enabled(mentioned already in OP)
9) No playstore downloading notification
Rest everything works well and ROM is smooth. I'll be looking forward to the upcoming updates.

darshan1504 said:
I have some bugs to report. If fixable please fix-
1) Your internal system has some problem bug(bug already mention in OP)
2) Pie gestures are buggy and it says swipe on left or right which can be confused with miui gestures instead of op gestures.
3) If gestures are enabled, it doesnt automatically hide navbar. Navbar appears over the gestures after a while(cant see the back button on navbar after this reappearance)
4) Face unlock doesnt work(with and without c2api)so cant check auto face unlock feature
5)Fingerprint authentication vibration option should not be in navigation options. Also the option turns itself off when you go back to the settings page
6) Slide on navbar to control brightness doesnt work. It doesnt have any effect till halfway and after that the screen just dims itself even further
7) When clock is shifted to the right, it leaves a disturbing space between the first notification icon and the left end of the screen
8) Camera2Api works fine. miui cam crashes when c2api is enabled(mentioned already in OP)
9) No playstore downloading notification
Rest everything works well and ROM is smooth. I'll be looking forward to the upcoming updates.
Click to expand...
Click to collapse
Also, Facebook app doesn't load images after a while... This problem i found on ArrowOs, Aoscp, and CrDroid 5. Does anyone think what the cause may be?

Works on encrypted system?

Fors4kenArg said:
Also, Facebook app doesn't load images after a while... This problem i found on ArrowOs, Aoscp, and CrDroid 5. Does anyone think what the cause may be?
Click to expand...
Click to collapse
Found a similar issue with Tumblr not loading images after scrolling a few pages, in a lot of these Roms that you mentioned

arifqur said:
Found a similar issue with Tumblr not loading images after scrolling a few pages, in a lot of these Roms that you mentioned
Click to expand...
Click to collapse
I can't find the source of the problem. I switch to mcaosp that doesn't have it.

I usually switch back to a GSI rom lile Benzo or PE and they are all fine

Fors4kenArg said:
Also, Facebook app doesn't load images after a while... This problem i found on ArrowOs, Aoscp, and CrDroid 5. Does anyone think what the cause may be?
Click to expand...
Click to collapse
I had a similar issue while restoring backup on WeChat with crDroid and Nitrogen (backup is done via WiFi and it suddenly stops and crashes after some seconds like if there was a signal cut), but ArrowOS is working fine for me.

[Rom] AICP Q 15.0 [UNOFFICIAL] [12/07/2020] [ANDROID 10.0] [MIDO]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
Latest Stable Release Version 15.0
ROM Download
OpenGApps
You tell...
FAQ:
Before using the ROM:
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
Source
Kernel source
Device tree source
Vendor source
Additional links:
My AICP Telegram Channel
My AICP Telegram Group for discussion and bug reports
Contributors:
@ashaykapadiya, @suyogg Helped a lot, @zeelog for device trees,kernel and vendor.
Thanks to doubleA, Cloudburner and other mido community devs for helping me build roms.
ROM OS Version: Android 10.0
Kernel: Linux 3.x
Version Information:
Status: Stable
ROM Firmware Required: Latest stable
Release Date: 07/03/2020
Latest Build Date: 12/07/2020
You want to see a "normal" night at the "DEV office", click here!!

Latest Update - 12/07/2020
Changelog: 12/07/2020 Update
* July Security Patch Merged
* Moto Dolby Added
* Latest changes merge from Zeelog
Changelog: 11/06/2020 Update
* June Security Patch Merged
* Wifi Bonding for 2.4ghz
* Added Camera Libs from Hydrogen
* Updated wcnss_service
* Updated Carrierconfig Overlay from tissot
* Latest changes merge from zeelog
* Enabled GLONASS
* Added Google AR Support
* Fixed Dirac
* Added support for Vodafone VOLTE
Changelog: 23/05/2020 Update
* May Security Patch Merged
* Updated Dispaly Hals from LA.UM.8.6.r1-04400-89xx.0
Changelog: 13/04/2020 Update
* April Security Patch Merged
* Updated GPS/Media/Thermal/Sensors/Perf/Widevine Blobs From LA.UM.8.6.r1-04000-89xx.0
* All Latest Changes Merged From Zeelog Trees
* Fixed Dark Video Recording Issue
* Improved Network Strength
* Optimized Shutdown Speed
* Fixed Advance Control
Changelog: 12/03/2020 Update
* Selinux Enforcing
* Minor Fixes
Note : Advanced Cotrols will not work on Selinux Enforcing as of now and if you wanna use it then switch to permissive by going to System>Aicp Extras>System Behaviour>Toggle it to permissive and select restore on boot .
Changelog: 09/03/2020 Update
* Merged Proper Goodix Fix (Thanks to Zeelog)
* March Security Patch
* Added Advanced Control
* Added Dark Theme Based on Sunrise/Sunset
* Merged Device Tree Changes Zeelog
* Merged Kernel Updates From Zeelog
* Merged Vendor Updates From Zeelog

Screenshots
https://imgur.com/a/UkhqXhQ
https://imgur.com/a/tn3FX9R
https://imgur.com/a/qFB5etf
https://imgur.com/a/lgu0iwY

*Reserved*

Fingerprint does not work at all.

Sorry for inconvenience,new build with proper fix will be up soon.??

qVIKTORq said:
Fingerprint does not work at all.
Click to expand...
Click to collapse
goodix fix build with march security patch is up.

Reviews?

Can notification led colour be customised in this rom? Do they work? Asking since this feature ain't working in Pie based Roms.

Sid130690 said:
Can notification led colour be customised in this rom? Do they work? Asking since this feature ain't working in Pie based Roms.
Click to expand...
Click to collapse
it can be customised via certain apps which supports them like whatsapp and telegram and others which supports, else there is only option to customize battery led notification atm.

Sometimes I'm getting trouble with laggy yt playback. When this is happening, I also do not have any sound from phone's speaker. Restarting helps, but is there a chance that it will be fixed?

buczek0711 said:
Sometimes I'm getting trouble with laggy yt playback. When this is happening, I also do not have any sound from phone's speaker. Restarting helps, but is there a chance that it will be fixed?
Click to expand...
Click to collapse
kindly flash different kernel, i would suggest underground or ethereal kernel. new build with everything fixed will be up soon. Thanks

ashaykapadiya said:
kindly flash different kernel, i would suggest underground or ethereal kernel. new build with everything fixed will be up soon. Thanks
Click to expand...
Click to collapse
Hey, I've done what You suggested. We will see, how this will work. First good sign - after flashing with new kernel, I was able to push titanium backup and lucky patcher via properly connected adb (wasn't able to do so on stock kernel in aicp q15, not sure why), while I wasn't able to install it normally via system, despite having all safety ticks turned off.

buczek0711 said:
Hey, I've done what You suggested. We will see, how this will work. First good sign - after flashing with new kernel, I was able to push titanium backup and lucky patcher via properly connected adb (wasn't able to do so on stock kernel in aicp q15, not sure why), while I wasn't able to install it normally via system, despite having all safety ticks turned off.
Click to expand...
Click to collapse
yeah stock kernel is giving problems so i have changed it in the next build.

New Build is UP, Check OP..
:good:

ashaykapadiya said:
New Build is UP, Check OP..
:good:
Click to expand...
Click to collapse
No hardware keys remapping? And i also found its quite slow response when opening phone using FP.

svnhvn said:
No hardware keys remapping? And i also found its quite slow response when opening phone using FP.
Click to expand...
Click to collapse
sadly not added by the source, Thanks will look into the fp issue:good:

New Build with June Security Patch is up..

Sid130690 said:
note 4 aicp latest version snapdragon uk samsung trite and gapps version
Click to expand...
Click to collapse
re aicp rom note 4 snapdragon samsung uk trite
i see date march 2020 and a download link for gapps and rom, is this link the latest strable aicp please, is 15 more stable than 14
the gapps is set to arm64 stock vers 9 is this correct
senior poster please reply
i have aicp from 2019 loaded and it is the most stable rom ive found thankyou, only issues are volte (using three and tesco) slow start, and battery draos when powered down.
When originally loaded the camera froxe the system, afte a while it rectified itself!
I have a second note 4 and would like to twrp flash the latest stable aicp

内内体

Database Info

welcome