Related
Hi, guys!
I'm here again to share a ROM (built by my friend) with you
This is a Flyme ROM based on Mokee 5.1 and......
Anyway it's beatiful and easy to use
Read it before you flash:
1.This ROM uses System2Data, which means part of the system is stored in DATA partition, so DON'T wipe data after flash complete, you can do it before flashing
2.List animation is enabled by default, you can close it in settings
3.If camera's display is wrong, choose camera settings-photo size-16:9
4.I strongly recommand to clean app data of "Search", there are some problem with it (due to source code, not my friend!)
This ROM is tested in XT1031, should working in all falcon devices
If you're xt1031, too. You might need to flash the TeleService Patch for Bugme.zip after installation complete, then change cdma subscription to "RUIM/SIM" and reboot to make RIL avialable.
Don't report any bugs or request anything, this project has been stopped for lazy reasons of the author, he may never update this rom anymore.
And I donn't know anything about development, I'm using AOSP7 now
DOWNLOAD
Google Drive
If you find this thread useful, please give me :good:
leave a place
Dual sim works?
Yogi wicahya said:
Dual sim works?
Click to expand...
Click to collapse
It should work:fingers-crossed:
Screenshoot please :good:
armuttaqin said:
Screenshoot please :good:
Click to expand...
Click to collapse
I'm using AOSP7 now
How do I change the animations to the default flymeos?
Yogi wicahya said:
How do I change the animations to the default flymeos?
Click to expand...
Click to collapse
is it booting fine for you ?? any bugs and plz upload some screenshots
.... downloading right now plz revert back asap
thanks in advance
not installing falcon dual sim status 7 twrp error any help ??
SunitTalwar said:
is it booting fine for you ?? any bugs and plz upload some screenshots
.... downloading right now plz revert back asap
thanks in advance
not installing falcon dual sim status 7 twrp error any help ??
Click to expand...
Click to collapse
Use philz touch recovery.. TWRP gives that error because the ROM uses system2data, which apparently TWRP doesn't support.
Edit: @JackyGreen Add this to the first post, or we will have this thread inundated with the same question lol
akki19 said:
Use philz touch recovery.. TWRP gives that error because the ROM uses system2data, which apparently TWRP doesn't support.
Edit: @JackyGreen Add this to the first post, or we will have this thread inundated with the same question lol
Click to expand...
Click to collapse
Thanks bro it worked with phils btw can you now give me a brief on how to switch back to twrp for flashing some other rom as phills has problems with new roms
still booting though boot animation needs resizing its way too stretched
will post some screen shots soon
SunitTalwar said:
Thanks bro it worked with phils btw can you now give me a brief on how to switch back to twrp for flashing some other rom as phills has problems with new roms
still booting though boot animation needs resizing its way too stretched
will post some screen shots soon
Click to expand...
Click to collapse
Fastboot flash twrp the same way you did philz. You can also use Flashify app. :good:
Why are you guys are so persistent with screenshots ?
I do have some but I just want to post soon before my hands freeze, this rom is bootable, I've flashed it once and used it for several days, or why would I share it ?
cant install tk pico gapps or opengapps pico. it gives error code 70. any idea would be great.
ralp88 said:
cant install tk pico gapps or opengapps pico. it gives error code 70. any idea would be great.
Click to expand...
Click to collapse
Google is restricted here, so I didn't try, maybe the Google Installer in Meizu App Store would help
ralp88 said:
cant install tk pico gapps or opengapps pico. it gives error code 70. any idea would be great.
Click to expand...
Click to collapse
error 70 is due to less system space remains after flashing the rom in system partition
Gapps pre installed, actived in options
Enviado desde mi Moto G mediante Tapatalk
Gapps
pluma321 said:
Gapps pre installed, actived in options
Enviado desde mi Moto G mediante Tapatalk
Click to expand...
Click to collapse
How to install gapps?
Gapps
ralp88 said:
cant install tk pico gapps or opengapps pico. it gives error code 70. any idea would be great.
Click to expand...
Click to collapse
How to install gapps ?
Install Rom but you will get error. And reboot in to recovery mode again from TWRP and install Rom again and boot without gapps. You need to wait long time and install gapps in same way. (Rom and Gapps need to install twice in my case) but my problem is playstore. I could not connect playstore......
TripleMax said:
Install Rom but you will get error. And reboot in to recovery mode again from TWRP and install Rom again and boot without gapps. You need to wait long time and install gapps in same way. (Rom and Gapps need to install twice in my case) but my problem is playstore. I could not connect playstore......
Click to expand...
Click to collapse
me too, its a shame
---- *NEW* MIUI 8 7.4.27 for HTC one m7 international ----
Just to help here
Link to download: https://mega.nz/#!35UBFAzb!06cuG9_6sxYQOCwSo4HACtD_bThqANkmqCYPtD31_IM
If someone have problems with downloading this just let me know!
Installation -
1. Download ROM and place it on your phone memory
2. Boot your phone in recovery mode (vol down + power)
3. Use standard wiping option
4. Install
Special greetings to NianRom who port this rom !
Have a nice day!
Cheers!
p
Wat abt sprint version
aroma installer
aroma installer freezes at 75.00%
great!!!
..hi...is this a nougat or marsmallow based rom?..chinese or global version?..thanks
JIMSHERIKO said:
aroma installer freezes at 75.00%
Click to expand...
Click to collapse
You need to have TWRP and Wipe Dalvik Cache, Cache, and Data first before you install this !!!
eaglefreewings76 said:
..hi...is this a nougat or marsmallow based rom?..chinese or global version?..thanks
Click to expand...
Click to collapse
It is 6.0.1 marshmallow
Great
Hi...thanks for your reply..but is this a chinese or global ROM?
eaglefreewings76 said:
Hi...thanks for your reply..but is this a chinese or global ROM?
Click to expand...
Click to collapse
Chinese version...
Peacemaker69 said:
You need to have TWRP and Wipe Dalvik Cache, Cache, and Data first before you install this !!!
Click to expand...
Click to collapse
still same
JIMSHERIKO said:
still same
Click to expand...
Click to collapse
Which model is your HTC m7 ?
Global rom
Thanks..I tried chinese miui 8 and I had problems with..as I changed language store, settings and themes didn't work good.. Sharing stuff is a confused way too cos it often takes u to use native chinese apps and chinese store...hard to handle!..so I was looking for the global one..
---------- Post added at 04:21 PM ---------- Previous post was at 04:16 PM ----------
JIMSHERIKO said:
still same
Click to expand...
Click to collapse
U have to get a total wipe..the only thing u don't have to wipe is the INTERNAL STORAGE..sometimes u could have to do it twice..
To the creator of this ROM - my device One m7 (int) hboot 1.61, TWRP 3.0.2.0
-Aroma installer is broken - after creating my own Aroma installer, rom installed without a problem.
-Camera app freezes preview after taking a photo,
-Hell lot of blotware
-Portable Hotspot crashes whole system (phone restarts)
It seems Aroma Installer is broken, because I have wiped everything and still don't work.
gpspl said:
To the creator of this ROM - my device One m7 (int) hboot 1.61, TWRP 3.0.2.0
-Aroma installer is broken - after creating my own Aroma installer, rom installed without a problem.
-Camera app freezes preview after taking a photo,
-Hell lot of blotware
-Portable Hotspot crashes whole system (phone restarts)
Click to expand...
Click to collapse
Well, aroma installer is okay to me. I really don't know why anyone have problem with aroma installer. I flash 10 times on 10 different phones and works without any problems...
Anyway, i think that maybe your phone model is not compatible or maybe your TWRP... Try with different versions and methods...
Let me know...
JIMSHERIKO said:
It seems Aroma Installer is broken, because I have wiped everything and still don't work.
Click to expand...
Click to collapse
Aroma cannot be broken. The problem is your phone model or TWRP...
All bugs I guess will be fixed in the next update... I find some minor bugs
Well aroma is broken, when people can't use it...
As i said - tested on twrp from 2.7.1.1 to 3.0.2.0 freezes at 75%, CWM same.
Phone wiped to the buttom of my soul - multiple times.
After cleaning in your rom .zip, and creating new aroma installer I was able to install rom.
And to you all who wants me to send it to you - nope. ROM is buggy as hell . I think it is just generic patchrom port.
gpspl said:
Well aroma is broken, when people can't use it...
As i said - tested on twrp from 2.7.1.1 to 3.0.2.0 freezes at 75%, CWM same.
Phone wiped to the buttom of my soul - multiple times.
After cleaning in your rom .zip, and creating new aroma installer I was able to install rom.
And to you all who wants me to send it to you - nope. ROM is buggy as hell . I think it is just generic patchrom port.
Click to expand...
Click to collapse
Well, thanks to know that. Keep your aroma installer for your self or you could help here someone if needs. Aroma installer is not broken. The problem is your phone I guess. Like I said, this rom has installed more than 10 times on 10 different phones and without any problems..
Search on google to find the reason why aroma installer stops on 75% while flashing.
Well... Hope you will resolve the problem then by yourself . The part of ROM porting is trying to find solution not telling everyone that your ROM is Perfect.
I guess your aroma missunderstud the catalogs. I've removed "NFC" from carrier folder and done some cleaning.
gpspl said:
Well... Hope you will resolve the problem then by yourself . The part of ROM porting is trying to find solution not telling everyone that your ROM is Perfect.
I guess your aroma missunderstud the catalogs. I've removed "NFC" from carrier folder and done some cleaning.
Click to expand...
Click to collapse
No, definitely not. This is not my ROM. But, I know that someone have different phone model or lack of knowledge with installing custom roms.. If you believe that Aroma installer is broken, why you not share any information about your phone ? Maybe the problem is your phone model
Anyway, this is not perfect rom but will be updated and fixed while if needs on the next update..
Cheers!
P
I Hope . My phone m7 international. Hboot 1.61. TWRP 3.0.2.0
gpspl said:
Well aroma is broken, when people can't use it...
As i said - tested on twrp from 2.7.1.1 to 3.0.2.0 freezes at 75%, CWM same.
Phone wiped to the buttom of my soul - multiple times.
After cleaning in your rom .zip, and creating new aroma installer I was able to install rom.
And to you all who wants me to send it to you - nope. ROM is buggy as hell . I think it is just generic patchrom port.
Click to expand...
Click to collapse
Can you send your version to me？email: [email protected]
Good day to everyone! I wish to provide proper steps on how to install the latest Oreo custom ROMs via TWRP in order to lessen the clutter in the custom ROM threads.
You'll need the following:
Latest TWRP Official (Fastboot TWRP)
Latest TWRP Installer (PERMANENT TWRP)
Considering you already installed TWRP via fastboot, we'll make it so that it will be permanently installed and you will not need to flash TWRP via bootloader again.
Download ROM + GApps (or no gapps if Pixel Experience)
Reboot to latest Official TWRP
Do necessary wipes (FORMAT data if having storage number issue; if not, wipe system/data/cache) then transfer ROM + gapps + magisk to internal/external storage
Flash ROM (don't reboot)
Flash latest TWRP Installer (for Permanent TWRP)
Reboot recovery (no need to transfer slots anymore as TWRP does it automatically)
Flash Gapps + Magisk
Reboot to system
To DIRTY FLASH or update the same ROM with an updated version
Reboot to recovery
Flash ROM
Flash TWRP Installer
Reboot recovery
Flash Gapps + Magisk
Reboot to system
For installing custom kernels
Download custom kernel
Reboot recovery
Flash custom kernel
Reboot to system
All of these has been tried and tested by me already.
Hey , where to flash rom??
As you have written gapps + magisk , gapps + magisk twice
sikoo1996 said:
Hey , where to flash rom?
As you have written gapps + magisk , gapps + magisk twice
Click to expand...
Click to collapse
I don't know what you mean. Read it again but slowly.
thnx man.
please add instructions to flash twrp permanent or share link.
vkbhanwariya said:
thnx man.
please add instructions to flash twrp permanent or share link.
Click to expand...
Click to collapse
+1
vkbhanwariya said:
thnx man.
please add instructions to flash twrp permanent or share link.
Click to expand...
Click to collapse
dceamit46 said:
+1
Click to expand...
Click to collapse
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
joeyhuab said:
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
Click to expand...
Click to collapse
thanks mate now ROM flashing seems very easy
vkbhanwariya said:
thanks mate now ROM flashing seems very easy
Click to expand...
Click to collapse
You're welcome! Good luck in switching ROMs!
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
You're welcome! Good luck in switching ROMs!
Click to expand...
Click to collapse
I really want to thank you for putting this up. Its immensely helpful and once again you are best at what you do.
gunmanrishi said:
I really want to thank you for putting this up. Its immensely helpful and once again you are best at what you do.
Click to expand...
Click to collapse
You're more than welcome and I'm always more than glad to help out the community. :highfive:
Sent from my Xiaomi Mi A1 using XDA Labs
With custom ROMs we have to install Twrp installer every time along with ROM zip, bit awkward.
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
madhpharma said:
With custom ROMs we have to install Twrp installer every time along with ROM zip, bit awkward.
Click to expand...
Click to collapse
Yep. That's because the ROM being flashed overwrites the recovery since there's no recovery partition.
kopitalk said:
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
Click to expand...
Click to collapse
Did you flash the TWRP.img or TWRP Installer.zip in TWRP?
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
Yep. That's because the ROM being flashed overwrites the recovery since there's no recovery partition.
Did you flash the TWRP.img or TWRP Installer.zip in TWRP?
Click to expand...
Click to collapse
Twrp installer, to be exact Twrp-recoveryInstaller-3.2.1-2-oreo.zip
joeyhuab said:
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
Click to expand...
Click to collapse
If we need to flash it every time after flash rom so how it's called permanent TWRP I don't understand. That because our device don't have recovery partition? If that so where this TWRP installed ( in which partition)?
cherryb8844 said:
If we need to flash it every time after flash rom so how it's called permanent TWRP I don't understand. That because our device don't have recovery partition? If that so where this TWRP installed ( in which partition)?
Click to expand...
Click to collapse
It's called permanent twrp because it won't get replaced by built in recovery whenever you reboot to recovery from system. TWRP gets installed within a part of the system partition.
Sent from my Xiaomi Mi A1 using XDA Labs
kopitalk said:
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
Click to expand...
Click to collapse
Error 20 if I'm not wrong, means you are using the wrong gapps package.
Are you using the right one?
varben said:
Error 20 if I'm not wrong, means you are using the wrong gapps package.
Are you using the right one?
Click to expand...
Click to collapse
Yes, I certainly use the right one (8.1), that's why I was baffled when twrp says that my device is 7.1.2 every time I tried to flash the 8.1 gapps. Anyway, flashing rom then straightaway followed by gapps and magisk was fine. I can flash twrp installer later on. But I just don't understand why.
kopitalk said:
Yes, I certainly use the right one (8.1), that's why I was baffled when twrp says that my device is 7.1.2 every time I tried to flash the 8.1 gapps. Anyway, flashing rom then straightaway followed by gapps and magisk was fine. I can flash twrp installer later on. But I just don't understand why.
Click to expand...
Click to collapse
Well that's weird. Works for me by flashing Gapps and Magisk after rebooting to recovery since it switches slots when you do that. Did you possibly come from a Nougat ROM which is why that's the error showing up?
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
Well that's weird. Works for me by flashing Gapps and Magisk after rebooting to recovery since it switches slots when you do that. Did you possibly come from a Nougat ROM which is why that's the error showing up?
Click to expand...
Click to collapse
I was thinking of that too but no, I was on Oreo Jan built the first time I rooted the phone and flash LOS15.1. Do you think I should at least flash Oreo stock once? Maybe my bootloader is still Nougat
Hi guys, since our device supports project Treble we can flash a Generic System Image(GSI). Many thanks to the developers work on this i hope many members can support them with feedback and donations. By the way our device is supported you can check the list of supported devices for phhusson Roms .
------------------------------------------------------------------------------------
If you want to test a couple of roms by @phhusson visit these links:
------------------------------------------------------------------------------------
- phh-Treble AOSP Thread
- LineageOS 15.1 phh-Treble Thread
- Resurrection Remix phh-Treble Thread
--------------------------------------------------------------
Other Treble supported Roms by other developers:
--------------------------------------------------------------
- Pixel Experience [AOSP] by @jhenrique09
- DroidOnTime - dotOS 2.x by @kubersharma
- Cosmic-OS_Pulsar__8.1.0 by @noobstyle1337
- AOSIP by @noobstyle1337
+ Make sure to flash the "Image for ARM64 A-only device" since our device supports only partition A.
+ How to flash guide
Please give your feedback on tested Roms. Good luck
I wouldn't mind testing these, as I do have TWRP and have my bootloader unlocked, but correct me if I'm wrong, we lose the squeezing function if we flash any of these correct?
hamsteyr said:
I wouldn't mind testing these, as I do have TWRP and have my bootloader unlocked, but correct me if I'm wrong, we lose the squeezing function if we flash any of these correct?
Click to expand...
Click to collapse
Yep, also the stock camera app might not work well if you manage to install it. That's why I am not in a hurry to test these Roms mainly because this device is my daily driver.
Why not try the PixelExperience Rom -
https://forum.xda-developers.com/pr...e-development/8-1-0-pixel-experience-t3796011
edkmho said:
Why not try the PixelExperience Rom -
https://forum.xda-developers.com/pr...e-development/8-1-0-pixel-experience-t3796011
Click to expand...
Click to collapse
Cool, I will add it to the list. Thanks
Ran v17 of Phh-treble earlier this month to get a taste of stock. It was so close to a daily driver back then.
Camera was a bit of a bummer. They said camera2 api was disabled; enabling it and throwing on google cam just caused crashes on launch. Stock camera was pretty potato but worked.
Apart from that I just had an issue with the vibration motor being a bit strange (a bit too aggressive during taps) and the play store not downloading apps (which appears to be fixed in the latest version).
Bluetooth music also appeared to have random cutouts during playback.
Everything else I used appeared to work. No squeeze feature though.
has anyone tried the PixelExperience rom?
Can anyone please write a guide from scratch ?
Guys,
I have flash the PixelExperience GSI and my phone go into bootloop.
I am still in the process of recovery to stock now.
I flashed
1. Lineage
2. PixelExperience
3. AOSP
All of them having bootloop.
kenosis said:
I flashed
1. Lineage
2. PixelExperience
3. AOSP
All of them having bootloop.
Click to expand...
Click to collapse
Strange, may I know the flash process you went through.
Rashad83 said:
Strange, may I know the flash process you went through.
Click to expand...
Click to collapse
I flashed via TWRP.
1. Wipe Data/Cache/Factory
2. Put xx.zip on SD card
3. Flash it
kenosis said:
I flashed via TWRP.
1. Wipe Data/Cache/Factory
2. Put xx.zip on SD card
3. Flash it
Click to expand...
Click to collapse
Did you change the the rom from .zip to .img you need to do that first, if that didn't work try to flash using Adb instead of TWRP.
I have attached a link to the guide, it might help you with troubleshooting.
Rashad83 said:
Did you change the the rom from .zip to .img you need to do that first, if that didn't work try to flash using Adb instead of TWRP.
I have attached a link to the guide, it might help you with troubleshooting.
Click to expand...
Click to collapse
Thank you. It works now after re-flashing stock firmware.
I tried both TWRP and fastboot method. All of them work. I am now on phh-treble AOSP.
kenosis said:
Thank you. It works now after re-flashing stock firmware.
I tried both TWRP and fastboot method. All of them work. I am now on phh-treble AOSP.
Click to expand...
Click to collapse
You are welcome, let us know later of your review of it and others. Good luck!
Rashad83 said:
You are welcome, let us know later of your review of it and others. Good luck!
Click to expand...
Click to collapse
Able to flash phh-treble but the voice always comes from speaker.
which rom is best?anyone tested it?
Can someone successfully flash PixelExperience ROM?
kenosis said:
Can someone successfully flash PixelExperience ROM?
Click to expand...
Click to collapse
i try but unsuccess, error bootloop
---------- Post added at 05:48 AM ---------- Previous post was at 05:25 AM ----------
kenosis said:
Can someone successfully flash PixelExperience ROM?
Click to expand...
Click to collapse
kenosis said:
Thank you. It works now after re-flashing stock firmware.
I tried both TWRP and fastboot method. All of them work. I am now on phh-treble AOSP.
Click to expand...
Click to collapse
Hi, I flash phh-treble AOSP in TWRP and reboot system but it show boot animation verry long and don't come in android
any one tested Lineage? it works?
Lenovo s5 (K520) TWRPs
UNOFFICIAL..................
These TWRPs should work on both the 3/32gb and 4/64gb variants
INSTALLATION
1. Download the crn twrp to your device or pc
2. Unlock bootloader
2. Flash recovery via another twrp or via fastboot
fastboot flash recovery "recovery name or drag recovery to cmd AND HIT ENTER"
3. Reboot to recovery and Enjoy!
TWRPs IMGs.. (NOT ZIPS)
TWRP
version 3.2.3-1
RED accents
https://mega.nz/#!MwVCnKAA!xV_OInGnusOL4yYXj7934MrI6rhzWOxcBgO9U_Dc5e4
Blue accents
https://mega.nz/#!E081CAxb!cvbJZU9ni6-A6pFBNIbj-NSyEFK3A6B32xZixca-SxQ
TWRP based on Orange Fox
version 3.2.2
https://mega.nz/#!lxNXhAKI!G92hB3ohHs3D0myHMh7Er5MPwCme6rngBCGy1fIDOTQ
STOCK GLOBAL FIRMWARE in case of anything.
https://drive.google.com/file/d/1DJWolu9xxrLjr7y0M07rexJI4A3oCyro/view
CREDITS
MrYacha, DarthJabba9
TeamWin
"will be updated"
RESERVED
-Added TWRP 3.2.3 with blue accents.
You're great bro
Piepoct said:
You're great bro
Click to expand...
Click to collapse
dmilz said:
Lenovo s5 (K520) TWRPs
UNOFFICIAL..................
TWRP
version 3.2.3-1
https://mega.nz/#!MwVCnKAA!xV_OInGnusOL4yYXj7934MrI6rhzWOxcBgO9U_Dc5e4
Click to expand...
Click to collapse
Please make another color. Red eyes rezhit.
amarcha said:
Please make another color. Red eyes rezhit.
Click to expand...
Click to collapse
Welcome..
Which colour do you want?
dmilz said:
Welcome..
Which colour do you want?
Click to expand...
Click to collapse
1.Text-white, background-black, choice of position-gray
* 2.Or replace red with blue
amarcha said:
1.Text-white, background-black, choice of position-gray
* 2.Or replace red with blue
Click to expand...
Click to collapse
Ok.. keep checking the thread, it should be done in 2 days or less
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with your TWRP and root everything is possible . Just found what project treble is, amazing possibilities.
Just one question... does your TWRP make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups
acost91 said:
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with your TWRP and root everything is possible . Just found what project treble is, amazing possibilities.
Just one question... does your TWRP make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups
Click to expand...
Click to collapse
No need of worrying about backups, the recoveries are stable.
The Lenovo S5 is a bang for the buck, very nice phone. Powerful camera, try gcam on it you will be amazed
F2fs support?
dmilz said:
Lenovo s5 (K520) TWRPs
UNOFFICIAL..................
These TWRPs should work on both the 3/32gb and 4/64gb variants
INSTALLATION
1. Download the crn twrp to your device or pc
2. Unlock bootloader
2. Flash recovery via another twrp or via fastboot
fastboot flash recovery "recovery name or drag recovery to cmd AND HIT ENTER"
3. Reboot to recovery and Enjoy!
TWRPs IMGs.. (NOT ZIPS)
TWRP
version 3.2.3-1
https://mega.nz/#!MwVCnKAA!xV_OInGnusOL4yYXj7934MrI6rhzWOxcBgO9U_Dc5e4
TWRP based on Orange Fox
version 3.2.2
https://mega.nz/#!lxNXhAKI!G92hB3ohHs3D0myHMh7Er5MPwCme6rngBCGy1fIDOTQ
CREDITS
MrYacha, DarthJabba9
TeamWin
"will be updated"
Click to expand...
Click to collapse
Restore vendor bug
bagoes117 said:
Restore vendor bug
Click to expand...
Click to collapse
Which one of the two recovery have that bug?
bagoes117 said:
F2fs support?
Click to expand...
Click to collapse
No
dmilz said:
Which one of the two recovery have that bug?
Click to expand...
Click to collapse
I use TWRP CRN
bagoes117 said:
I use TWRP CRN
Click to expand...
Click to collapse
Ok, use the second one based on Orange fox
amarcha said:
1.Text-white, background-black, choice of position-gray
* 2.Or replace red with blue
Click to expand...
Click to collapse
It took long but its done. check op
dmilz said:
It took long but its done. check op
Click to expand...
Click to collapse
Thank you, I will try it
dmilz said:
No need of worrying about backups, the recoveries are stable.
The Lenovo S5 is a bang for the buck, very nice phone. Powerful camera, try gcam on it you will be amazed
Click to expand...
Click to collapse
Do u have a tutorial for installing GCAM on Lenovo S5? I tried a lot of APKs, many MAGISK Modules and nothing it's working
robi10101298 said:
Do u have a tutorial for installing GCAM on Lenovo S5? I tried a lot of APKs, many MAGISK Modules and nothing it's working
Click to expand...
Click to collapse
Stock rom comes with camera 2 api already enabled (if fails for you, try reflash rom). Just install a gcam and run..
Try the Razor Phone2 gcam here https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/. Give other ones atry if the razor one doesnt work for you