hi am looking for the above its sm-g930f uk vod a have found it but told to pay for premium speed or wait 6hrs anyone has a link?
skooter32 said:
hi am looking for the above its sm-g930f uk vod a have found it but told to pay for premium speed or wait 6hrs anyone has a link?
Click to expand...
Click to collapse
Use Samfirm tool
cooltt said:
Use Samfirm tool
Click to expand...
Click to collapse
thanks
So i have tried every uk firmware through odin all pass exept virgin and o2 stops at hidden.img any ideas?
skooter32 said:
So i have tried every uk firmware through odin all pass exept virgin and o2 stops at hidden.img any ideas?
Click to expand...
Click to collapse
I thought you just wanted Vodafone.
Anyway O2 requires the device to be network locked to them to recover or flash firmware. If it isnt then it won't allow any flashing.
Virgin piggyback on EE network and maybe have the same set up. I don't know for sure as I've never used virgin.
To get round the problem you can remove the hidden.img file from the firmware prior to flashing then flash it on it's own afterwards.
cooltt said:
i thought you just wanted vodafone.
Anyway o2 requires the device to be network locked to them to recover or flash firmware. If it isnt then it won't allow any flashing.
Virgin piggyback on ee network and maybe have the same set up. I don't know for sure as i've never used virgin.
To get round the problem you can remove the hidden.img file from the firmware prior to flashing then flash it on it's own afterwards.
Click to expand...
Click to collapse
how do i unzip an md5 file?
Related
Hi, I recently tried to get my phone unlocked. I watched the guy do it, he flashed an older modem and then flashed a UAE firmware.
My original is O2 UK, and I'd like to revert to this firmware as the About Device section shows up with Unted Arab Emirates and the mobile networks section shows LTE rather than 4G.
I have tried flashing the latest revision of the O2 stock rom and odin fails attempting to write sboot.bin with the error message SW Rev. fail (I don't recall the exact numbers after this) appearing on the phone.
I am guessing this is the secure boot loader, which I am aware you can't downgrade, but is there any way of flashing this stock rom since I know it is compatible with the phone?
Try to flash G920FXXU5DQA7 (CSC code:BTU)
chemeleon said:
Hi, I recently tried to get my phone unlocked. I watched the guy do it, he flashed an older modem and then flashed a UAE firmware.
My original is O2 UK, and I'd like to revert to this firmware as the About Device section shows up with Unted Arab Emirates and the mobile networks section shows LTE rather than 4G.
I have tried flashing the latest revision of the O2 stock rom and odin fails attempting to write sboot.bin with the error message SW Rev. fail (I don't recall the exact numbers after this) appearing on the phone.
I am guessing this is the secure boot loader, which I am aware you can't downgrade, but is there any way of flashing this stock rom since I know it is compatible with the phone?
Click to expand...
Click to collapse
You could possibly use smartswitch if you have the serial number of the phone which would download the default firmware that the phone came with if odin fails again
Yes i agree, smartswitch could be your best option.
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
chemeleon said:
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
Click to expand...
Click to collapse
Yeah looks like this is a bootloader issue, it won't let you install a firmware which contains an older bootloader, only thing I can is to download the latest non branded UK firmware and see if that flashes.
I'm getting this error too with Device 4 Binary 3 but i didn't find the right firmware yet
I hope in Nougat release
chemeleon said:
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
Click to expand...
Click to collapse
LollosoSi said:
I'm getting this error too with Device 4 Binary 3 but i didn't find the right firmware yet
I hope in Nougat release
Click to expand...
Click to collapse
As I said before;
Try to flash G920FXXU5DQA7 (CSC code:BTU)
forumber2 said:
As I said before;
Try to flash G920FXXU5DQA7 (CSC code:BTU)
Click to expand...
Click to collapse
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
LollosoSi said:
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
Click to expand...
Click to collapse
You could try using samfirm which a windows application which downloads samsung firmwares
LollosoSi said:
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
Click to expand...
Click to collapse
As @sofir786 said, you can use SamFirm;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open it, set the settings like this;
sofir786 said:
You could try using samfirm which a windows application which downloads samsung firmwares
Click to expand...
Click to collapse
Wow I didn't know, it works thanks
forumber2 said:
As I said before; Try to flash G920FXXU5DQA7 (CSC code:BTU)
Click to expand...
Click to collapse
I'll try flashing when the download finishes
Edit:
WORKING!
I used last(I think) ITV
File names:
AP: AP_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar
CSC: CSC_ITV_G920FITV5DQA2_CL10387678_QB12242913_REV02_user_low_ship.tar
BL: BL_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar
CP: CP_G920FXXU5DPL3_CL8821257_QB11771442_REV02_user_low_ship.tar
Samsung updated their bootloaders to 4XX in September/October so you cant flash back an older one or downgrade,so the only solution you have is to flash the new one which is 5XX released this year.
Flashed the latest UK revision (not the O2 branded one) and it worked
chemeleon said:
Flashed the latest UK revision (not the O2 branded one) and it worked
Click to expand...
Click to collapse
Told you
Just a quick q. if and when Vodafone firmware for this device supports wifi calling, will i be able to flash voda firmware.
i ask because i tried to flash voda firmware on my s7 edge via odin and got a bootloop and had to flash BTU firmware in download mode which wiped my phone.
cant be asked to keep resetting my phone all the time
mikey_sk said:
Just a quick q. if and when Vodafone firmware for this device supports wifi calling, will i be able to flash voda firmware.
i ask because i tried to flash voda firmware on my s7 edge via odin and got a bootloop and had to flash BTU firmware in download mode which wiped my phone.
cant be asked to keep resetting my phone all the time
Click to expand...
Click to collapse
Short answer, yes you can!
samteeee said:
Short answer, yes you can!
Click to expand...
Click to collapse
it was possible with my s7e but it threw a hissy fit
mikey_sk said:
it was possible with my s7e but it threw a hissy fit
Click to expand...
Click to collapse
This thread will give you all the info you need, check it out:
https://forum.xda-developers.com/galaxy-s8+/how-to/official-stock-firmware-update-odin-t3582175
mikey_sk said:
Just a quick q. if and when Vodafone firmware for this device supports wifi calling, will i be able to flash voda firmware.
i ask because i tried to flash voda firmware on my s7 edge via odin and got a bootloop and had to flash BTU firmware in download mode which wiped my phone.
cant be asked to keep resetting my phone all the time
Click to expand...
Click to collapse
You CAN flash the VOD-firmware, but your CSC will change to the "default"-CSC of the "Multi-CSC OVF" -> VD2
You must use the AP-BL-CP & CSC_OVF of the VOD-package -> it will reset your device (which is necessary)!
Anyone who owns G930F and didn't have VoLTE or WiFi calling enabled on Nougat firmware BUT managed to get it working afterdoing "x" please share how to do it.
I'm tired of waiting for my Network to release the firmware...
Step by step guide would be welcome
My service provider supports both techs.
thundastruck said:
Anyone who owns G930F and didn't have VoLTE or WiFi calling enabled BUT managed to get it working afterdoing "x" please share how to do it.
I'm tired of waiting for my Network to release the firmware...
Click to expand...
Click to collapse
First and most important ....does your carrier offer those options?
MAX 404 said:
First and most important ....does your carrier offer those options?
Click to expand...
Click to collapse
Of course they do! :good:
Basically just want to know what would happen if I flashed carrier branded csc only with Odin.
E.g. would my phone refuse to boot, would my phone be carrier branded if it succesfully boots, trip Knox, etc...
Any info welcome - tired of googling the answers or searching XDA forum for answers.
thundastruck said:
Basically just want to know what would happen if I flashed carrier branded csc only with Odin.
E.g. would my phone refuse to boot, would my phone be carrier branded if it succesfully boots, trip Knox, etc...
Any info welcome - tired of googling the answers or searching XDA forum for answers.
Click to expand...
Click to collapse
Might have some carrier preinstalled crap but it won't trip KNOX nor prevent the phone from booting
thundastruck said:
Basically just want to know what would happen if I flashed carrier branded csc only with Odin.
E.g. would my phone refuse to boot, would my phone be carrier branded if it succesfully boots, trip Knox, etc...
Any info welcome - tired of googling the answers or searching XDA forum for answers.
Click to expand...
Click to collapse
Hi mate,,,,
Some more info would help , like what firmware /CSC you have now and what firmware carriers CSC you need....
Anyhow you may find this interesting, check here
MAX 404 said:
First and most important ....does your carrier offer those options?
Click to expand...
Click to collapse
MAX 404 said:
Hi mate,,,,
Some more info would help , like what firmware /CSC you have now and what firmware carriers CSC you need....
Anyhow you may find this interesting, check here
Click to expand...
Click to collapse
That answered some of my questions, thanks.
Please see screenshot for my mutiCSC firmware. I am running Android 7 but haven't changed CSC since I got the phone in December 2016. I got it with Marshmallow on it. Everytime I upgrade firmware with Odin I select Home CSC so my CSC never changes.
Since the solution is in the CSC (afaik), which CSC do you recommend I flash with Odin? I understand how to flash with Odin if CSC not in my multiCSC firmware (tick re-partition, etc...)
My home network is Vodafone (CSC is XVF which is not part of my CSC).
thundastruck said:
That answered some of my questions, thanks.
Please see screenshot for my mutiCSC firmware. I am running Android 7 but haven't changed CSC since I got the phone in December 2016. I got it with Marshmallow on it. Everytime I upgrade firmware with Odin I select Home CSC so my CSC never changes.
Since the solution is in the CSC (afaik), which CSC do you recommend I flash with Odin? I understand how to flash with Odin if CSC not in my multiCSC firmware (tick re-partition, etc...)
My home network is Vodafone (CSC is XVF which is not part of my CSC).
Click to expand...
Click to collapse
If i got it right you are not root, right? if you are root there are other ways....
Yes you need the right CSC to make it work , in this case Vodafone XFV.
When you change to a different CSC is recommended to check re partition to adjust to the possible change in partitions
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/XFV/download/G930FXXU1DQD2/131635/
Download the firmware and extract the correct CSC from it , if you do not want all the vodafone stuff you could download and unbranded firmware and use the BL ,CP , AP from it and the CSC (XFV) from Vodafone and flash it all together
BACK UP FIRST .......
MAX 404 said:
If i got it right you are not root, right? if you are root there are other ways....
Yes you need the right CSC to make it work , in this case Vodafone XFV.
When you change to a different CSC is recommended to check re partition to adjust to the possible change in partitions
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/XFV/download/G930FXXU1DQD2/131635/
Download the firmware and extract the correct CSC from it , if you do not want all the vodafone stuff you could download and unbranded firmware and use the BL ,CP , AP from it and the CSC (XFV) from Vodafone and flash it all together
BACK UP FIRST .......
Click to expand...
Click to collapse
Yes, no root (for now). Will only root in a year when I get my upgrade on my contract.
Thanks, you basically confirmed what I suspected. Just needed a Jedi to point that out so I have peace of mind. I shall report back... :highfive: :good:
thundastruck said:
Yes, no root (for now). Will only root in a year when I get my upgrade on my contract.
Thanks, you basically confirmed what I suspected. Just needed a Jedi to point that out so I have peace of mind. I shall report back... :highfive: :good:
Click to expand...
Click to collapse
No problem mate.
Let us know how it goes
Hello all,
My phone is properly stuck in a bootloop and keeps going into download mode, tried for a few hours to get it out but no luck.
I want to flash new firmware, my device is a SM-G930W8 but I don't know the region.. I bought it unlocked from the Samsung Experience Store in Edmonton, Canada when it right came out, but threw the box already.
Which firmware region would I need?
Thanks!
rogier121 said:
Hello all,
My phone is properly stuck in a bootloop and keeps going into download mode, tried for a few hours to get it out but no luck.
I want to flash new firmware, my device is a SM-G930W8 but I don't know the region.. I bought it unlocked from the Samsung Experience Store in Edmonton, Canada when it right came out, but threw the box already.
Which firmware region would I need?
Thanks!
Click to expand...
Click to collapse
You can download branded to the network your using or unbranded. The firmware that just says "Canada" is unbranded generic.
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/
cooltt said:
You can download branded to the network your using or unbranded. The firmware that just says "Canada" is unbranded generic.
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/
Click to expand...
Click to collapse
Ok I see, so XAC is essentially the unbranded ones?
rogier121 said:
Ok I see, so XAC is essentially the unbranded ones?
Click to expand...
Click to collapse
yes
Hi all,
I bought this phone from my friend who was using it on ATT. It is global unlocked phone and I activate and register, change new 5gsim and no problem on Verizon Network.
It is working and fine but, it shows ATT logo when phone is boot up and still it has ATT bloatware.
Under the Software information > Service provider software version is showing below
SAOMC_SM-F711U_OYN_ATT_RR_0016
ATT/ATT/ATT
SO THIS PHONE IS legit!! even Verizon told us. They did everything with me for 3 hours. wow!
Anyway, I think it's the problem of other carrier's software is in
Do you guys know how to change provider software to Verizon? should I contact Samsung??
Please help me.
Thank you!!!!!!!!
Leeman78 said:
Hi all,
I bought this phone from my friend who was using it on ATT. It is global unlocked phone and I activate and register, change new 5gsim and no problem on Verizon Network.
It is working and fine but, it shows ATT logo when phone is boot up and still it has ATT bloatware.
Under the Software information > Service provider software version is showing below
SAOMC_SM-F711U_OYN_ATT_RR_0016
ATT/ATT/ATT
SO THIS PHONE IS legit!! even Verizon told us. They did everything with me for 3 hours. wow!
Anyway, I think it's the problem of other carrier's software is in
Do you guys know how to change provider software to Verizon? should I contact Samsung??
Please help me.
Thank you!!!!!!!!
Click to expand...
Click to collapse
Flash a U1 software and VZW userdata.
rogerandgina06 said:
Flash a U1 software and VZW userdata.
Click to expand...
Click to collapse
Thank you for reply. I don't know what you mean and how should I do it?
Would you let me know?
Leeman78 said:
Thank you for reply. I don't know what you mean and how should I do it?
Would you let me know?
Click to expand...
Click to collapse
Read here to get a idea.
F711U and F711U1 Firmware Links and Flashing Discussion Here
(WIP, files are currently processing and uploading) For those who aren't already aware, F711U is the model number of all of the US carrier versions of the Z Flip3. The F711U1 is the model number of the same device, but sold by Samsung SIM...
forum.xda-developers.com
rogerandgina06 said:
Read here to get a idea.
F711U and F711U1 Firmware Links and Flashing Discussion Here
(WIP, files are currently processing and uploading) For those who aren't already aware, F711U is the model number of all of the US carrier versions of the Z Flip3. The F711U1 is the model number of the same device, but sold by Samsung SIM...
forum.xda-developers.com
Click to expand...
Click to collapse
I found solutions and flash the firmware with Verizon userdata, but, still shwoing everything on ATT. Not Verizon.
I even flash with factory reset. Yes, I used Odin 3.13.1b patched and it passed...
Do you have any idea?
Leeman78 said:
I found solutions and flash the firmware with Verizon userdata, but, still shwoing everything on ATT. Not Verizon.
I even flash with factory reset. Yes, I used Odin 3.13.1b patched and it passed...
Do you have any idea?
Click to expand...
Click to collapse
Try google to search for a different csc. After that I don't have a clue...
I got it working. Thank you. your "Flash a U1 software and VZW userdata." help me a lot.
I did find out good firmware and software at Sammobile and now everything works as Verizon.
Thank you
Leeman78 said:
I got it working. Thank you. your "Flash a U1 software and VZW userdata." help me a lot.
I did find out good firmware and software at Sammobile and now everything works as
Leeman78 said:
I found solutions and flash the firmware with Verizon userdata, but, still shwoing everything on ATT. Not Verizon.
I even flash with factory reset. Yes, I used Odin 3.13.1b patched and it passed...
Do you have any idea?
Click to expand...
Click to collapse
Can you link me to the one you used ? I’m trying to flash mine to u1 and I can’t get it to pass for anything, I keep getting model mismatch or complete write fail
Click to expand...
Click to collapse
@iHeartslutsz https://www.sammobile.com/samsung/galaxy-z-flip-3/firmware/#SM-F711U1
Whenever I flash a new software through Odin after downloading it from Sammobile, the Dark Side RC theme (I think it's related somehow to the so called Star Wars special edition) for samsung, comes as one of two default themes into the system and can not be removed. Hence, even I change the theme from setting, this iron head appears everytime I restart the phone for a few seconds. So I tried different firmwares for my country but nothing changes. So someone from another forum said that my service provider software version differs than theirs. So in short, how to get rid of this silly iron head? Any help would be appreciated.
change csc, use SamKEY (paid) or SamFwFRPTool (free), then flash frimware you need with odin with CSC file (this will wipe your phone and reset to factory), not use home_csc in odin
wojtas69 said:
change csc, use SamKEY (paid) or SamFwFRPTool (free), then flash frimware you need with odin with CSC file (this will wipe your phone and reset to factory), not use home_csc in odin
Click to expand...
Click to collapse
Thank you. I downloaded totally different firmware files with different CSC code and the problem has solved.
SamFwFRPTool is a tool I use to change my CSC software channel. The way I understand it you need to change the CSC in the program before flashing the u1 software on it so you get a full unlock as opposed to a partial one.
I might be wrong here though so don't take everything I say as being true.