Related
I know, there've been plenty of "please help, I can't flash xx" threads. If there's a duplicate out there, please point me towards it.
I've been trying to get havoc or omni on my phone recently for fun but have had no luck. I've tried multiple different ways, maybe someone can tell me what I'm doing wrong or if there is actually something wrong with my device.
Method 1:
-Use the Oneplus Recovery tool to get a fresh start
-allow OOS to update itself to 9.0.3
-unlock bootloader
-boot twrp-3.2.3-x_blu_spark_v9.91_op6
-flash havoc (for example), flash twrp right after
-reboot to recovery (using button in twrp)
->this results in the phone restarting, shows bootloader unlocked screen, and then goes to black screen/white LED
Method 2:
-bootloader unlocked
-extract 9.0.3 full rom, use flash-all.bat
-fastboot set_active other
-flash-all.bat again (to get the other slot)
-boot twrp-3.2.3-x_blu_spark_v9.91_op6
-flash havoc (for example), flash twrp right after
-reboot to recovery (using button in twrp)
->this results in the phone restarting, shows bootloader unlocked screen, and then goes to black screen/white LED
After this black screen/white led issue, I can get into fastboot but I can't boot the twrp image.
I'm at wits end... I really have no clue what to do. Any ideas? I'm open to try any suggestions.
I should note, when I get 9.0.3 on there, either from method 1 or 2 it's possible to boot and use it.
Try these steps:
(Make sure You have unlocked BL)
Fastboot boot twrp_blue_spark.img
Now go to wipe and choose format data, type yes.
Copy this: OxygenOS 9.0.3 OTA.zip
To Your internal storage.
Now flash it.
Now go to reboot in TWRP and choose reboot bootloader.
Now fastboot boot twrp.img again.
Flash OxygenOS OTA zip again.
Now go to reboot in TWRP, choose reboot bootloader.
Fastboot boot twrp.img again.
Copy latest Havoc OS 2.1 to Your internal storage.
Flash it.
Reboot without flashing anything else.
Should work now:fingers-crossed:
Like 99% you didn't read the "how to" oos needs to be flashed on both slot a and B from twrp rather than fastboot
whizeguy said:
Like 99% you didn't read the "how to" oos needs to be flashed on both slot a and B from twrp rather than fastboot
Click to expand...
Click to collapse
I've tried flashing it on both slots a ton of times from twrp. Never got it to work.
Gibsonflyingv said:
I've tried flashing it on both slots a ton of times from twrp. Never got it to work.
Click to expand...
Click to collapse
Boot to twrp
Flash OOS 9.0.3 (if it's recommended to use that)
Flash twrp
Reboot to twrp
Flash OOS again
Flash twrp
Reboot to twrp
Wipe data, cache / dalvik
Flash custom rom
Flash twrp
Reboot to twrp
Flash gapps
Flash magisk
Done.
I've read this 4 times, should be right (high fever now so I just wanted to make sure)
I updated to android 10 an hour ago, and placed my phone into the bootloader so I could re-flash TWRP. After I ran the command (fastboot flash boot C:\Users\USER\Downloads\twrp-3.3.1-4-guacamole.img), and tried rebooting, I couldn't leave the bootloader. I've tried using the buttons, trying to push the img to the phone and force it into TWRP, but nothing works. I think I didn't enable USB debugging when I entered the bootloader, but it was enabled before I updated.
It's a known issue, the commands aren't included in the bootloader for q yet. We need to wait for OnePlus to add them. To fix your problem, try fastboot booting the magisk patched boot.img for the 10 beta.
USB Debugging has nothing to do with fastboot.... Just flash stock boot img or a patched with twrp/magisk and boot your phone usually
mercenaryhmster said:
It's a known issue, the commands aren't included in the bootloader for q yet. We need to wait for OnePlus to add them. To fix your problem, try fastboot booting the magisk patched boot.img for the 10 beta.
Click to expand...
Click to collapse
Where do I find the patched boot image?
TheEndernaut said:
Where do I find the patched boot image?
Click to expand...
Click to collapse
If nothing helps, try to reflash with MsmDownloadTool.
TheEndernaut said:
Where do I find the patched boot image?
Click to expand...
Click to collapse
https://forum.xda-developers.com/on...isk-patched-boot-image-oneplus-7-pro-t3964345
Also, once you flashed boot image and booted into Android, Download the twrp INSTALLER and install it via magisk module
From here
https://www.androidfilehost.com/?fid=1899786940962578045
GUGUITOMTG4 said:
https://forum.xda-developers.com/on...isk-patched-boot-image-oneplus-7-pro-t3964345
Also, once you flashed boot image and booted into Android, Download the twrp INSTALLER and install it via magisk module
From here
https://www.androidfilehost.com/?fid=1899786940962578045
Click to expand...
Click to collapse
Was able to get past the bootloader, but once I swipe up to load the device, it blacks out
GUGUITOMTG4 said:
https://forum.xda-developers.com/on...isk-patched-boot-image-oneplus-7-pro-t3964345
Also, once you flashed boot image and booted into Android, Download the twrp INSTALLER and install it via magisk module
From here
https://www.androidfilehost.com/?fid=1899786940962578045
Click to expand...
Click to collapse
I can't find the menue in magisk manager where I can install TWRP
TheEndernaut said:
I can't find the menue in magisk manager where I can install TWRP
Click to expand...
Click to collapse
Hamburger (upper left), modules, plus icon (bottom center), browse to twrp installer zip.
TheEndernaut said:
I updated to android 10 an hour ago, and placed my phone into the bootloader so I could re-flash TWRP. After I ran the command (fastboot flash boot C:\Users\USER\Downloads\twrp-3.3.1-4-guacamole.img), and tried rebooting, I couldn't leave the bootloader. I've tried using the buttons, trying to push the img to the phone and force it into TWRP, but nothing works. I think I didn't enable USB debugging when I entered the bootloader, but it was enabled before I updated.
Click to expand...
Click to collapse
First you don't flash the TWRP image.
That image is used as a fastboot boot. It is not to be flashed.
Normally, you would boot with that image and flash the TWRP zip to make it permanent.
Once TWRP is flashed, you need to also flash Magisk.
To get out of the situation you are in, you need a stock boot image to flash.
Once that is done, you can start over.
Read the instructions carefully before flashing images.
johnx818 said:
Hamburger (upper left), modules, plus icon (bottom center), browse to twrp installer zip.
Click to expand...
Click to collapse
There is no modules page
johnx818 said:
Hamburger (upper left), modules, plus icon (bottom center), browse to twrp installer zip.
Click to expand...
Click to collapse
There is no modules menu
tech_head said:
First you don't flash the TWRP image.
That image is used as a fastboot boot. It is not to be flashed.
Normally, you would boot with that image and flash the TWRP zip to make it permanent.
Once TWRP is flashed, you need to also flash Magisk.
To get out of the situation you are in, you need a stock boot image to flash.
Once that is done, you can start over.
Read the instructions carefully before flashing images.
Click to expand...
Click to collapse
Just to clarify then, when I run fastboot flash boot TWRP, I use the zip? If not, what command am I using?!
The command is "fastboot boot recoveryfilaneme.img" using the .img file
TheEndernaut said:
Just to clarify then, when I run fastboot flash boot TWRP, I use the zip? If not, what command am I using?!
Click to expand...
Click to collapse
No, no, no.
TWRP can only be flashed from either TWRP or Magisk.
On this device, you can only boot the image file. You can only flash the zip while running a booted TWRP or from the Magisk Manager.
TheEndernaut said:
Just to clarify then, when I run fastboot flash boot TWRP, I use the zip? If not, what command am I using?!
Click to expand...
Click to collapse
Hope I can explain myself. You are using a command you shouldn't be using: fastboot FLASH boot, you shouldn't flash the image from fastboot, you need to use that image to boot into recovery and then flash recovery itself from INSIDE recovery, then you NEED to flash Magisk from inside recovery too.
The command is: fastboot boot recovery.img
Btw, you can't see the "modules" option in Magisk because I think you flashed stock boot.img. Try flashing Magisk patched boot img and then flash recovery in Magisk as it was said before.
Did you click all the 3 buttons at once?
TheEndernaut said:
After I ran the command (fastboot flash boot C:\Users\USER\Downloads\twrp-3.3.1-4-guacamole.img)
Click to expand...
Click to collapse
This is not a command you will find in any guide for this device (at least not any guide that is correct)!
The command you used, flashed the image to over-write the boot partition, which is essentially the kernel. You no longer have a kernel, so of course the phone cannot properly boot to OS. This is also not the correct way to install TWRP, so therefore you have no TWRP installed on the phone, either.
Proper sequence to install TWRP would have been:
1) fastboot boot TWRP.img
This only "boots" into TWRP, but does not install it. I know the syntax here is confusing. "boot" versus "flash boot" do completely different things. In this case "boot" is the action. In the command you used "flash" is the action, and the "boot" partition is the location.
2) Flash TWRP installer zip
3) Flash Magisk
At this point, the easiest path is probably to do what was suggested in Reply #6 above (flash patched boot image, boot to OS, open Magisk and install TWRP from Magisk).
redpoint73 said:
This is not a command you will find in any guide for this device (at least not any guide that is correct)!
The command you used, flashed the image to over-write the boot partition, which is essentially the kernel. You no longer have a kernel, so of course the phone cannot properly boot to OS. This is also not the correct way to install TWRP, so therefore you have no TWRP installed on the phone, either.
Proper sequence to install TWRP would have been:
1) fastboot boot TWRP.img
This only "boots" into TWRP, but does not install it. I know the syntax here is confusing. "boot" versus "flash boot" do completely different things. In this case "boot" is the action. In the command you used "flash" is the action, and the "boot" partition is the location.
2) Flash TWRP installer zip
3) Flash Magisk
At this point, the easiest path is probably to do what was suggested in Reply #6 above (flash patched boot image, boot to OS, open Magisk and install TWRP from Magisk).
Click to expand...
Click to collapse
How do you install TWRP from Magisk?
blade35 said:
How do you install TWRP from Magisk?
Click to expand...
Click to collapse
Magisk/Modules/+/Select TWRP installer.zip
Hi everybody,
I tried to update my OOS to Android Q while keeping magisk, there was probably a module not compatible that I forgot to remove before and I could not access the interface after rebooting.
Trying to restore the stock boot.img with fastboot, now I am stuck on the "Boot Loader is unlocked" warning page and the phone refuses to boot.
I tried to wipe everything using fastboot -w but still can't boot normally, if anyone can help me solve this please, I would be grateful.
Regards.
Try flashing the unofficial TWRP for Q from here
You can follow that guide but don't install Magisk, then after successful boot, try flashing Magisk uninstaller in TWRP.
Can try flashing android 10 boot.img from #2 link.
this happened to me. It was because I had the usb pluged. If you take the usb out it will boot. Or at least mine worked that way.
What I did was completely restoring the device by flashing a fastboot ROM then updating to Q again. SO I've lost all my data.
Do you know any way I can root android Q actually ?
https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213
danecr7 said:
Hi everybody,
I tried to update my OOS to Android Q while keeping magisk, there was probably a module not compatible that I forgot to remove before and I could not access the interface after rebooting.
Trying to restore the stock boot.img with fastboot, now I am stuck on the "Boot Loader is unlocked" warning page and the phone refuses to boot.
I tried to wipe everything using fastboot -w but still can't boot normally, if anyone can help me solve this please, I would be grateful.
Regards.
Click to expand...
Click to collapse
If you have access to fastboot then you can flash twrp and do below steps exactly else you will stuck at bootloader warning message
Reboot to fastboot mode. Flash TWRP img using the following command--> Oneplus blocked fastboot boot command
Code:
fastboot flash boot twrp-******.img
From fastboot mode, reboot directly to recovery mode. Now you have a working TWRP. (If you already have Magisk earlier, flash Magisk uninstaller now before proceeding to the next steps)
In TWRP, flash the stock boot image in boot partition. Don't reboot .
Flash TWRP installer zip then reboot to recovery. You now have a fully working TWRP in OOS 10. . Don't reboot .
Flash Magisk v20.1. Reboot to system.
Hi,
I was on Oxygen OS 10.0.0. Rooted with twrp-3.3.1-4-enchilada and magisk 20.1. (I had used this guide to do it. https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213) Today I downloaded the zip for 10.0.1 from the Oxygen Updater app and tried to flash it like I have done for OOS 9 in the past as usual. I went to recovery (I did not backup), I just wiped my data (not internal storage), cache and system. After that I tried to install the new zip but I got an error. It just said error unable to install. Didn't mention why. I tried flashing the older OOS 10 zip and got the same error.
So I thought I will try flashing on the other slot. I was on slot B. I switched to slot A and got the same error.
So I thought I will try to sideload. When I tried that I got the same error. So I thought I will try to reflash the twrp img itself. I went to fastboot mode and tried runnning this command
fastboot boot twrp-3.3.1-14-enchilada-Q-mauronofrio.img
It showed me this error
Sending 'boot.img' (65536 KB) OKAY [ 1.609s]
Booting FAILED (remote: 'unknown command')
fastboot: error: Command failed
Now I don't have any recovery at all. I have just the unlocked bootloader and no OS nor recovery. What can I do to flash TWRP again and install either OOS 10.0.1 zip or 10.0.0 zip? Any help will be great.
Thanks
Arnavzz said:
Hi,
I was on Oxygen OS 10.0.0. Rooted with twrp-3.3.1-4-enchilada and magisk 20.1. (I had used this guide to do it. https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213) Today I downloaded the zip for 10.0.1 from the Oxygen Updater app and tried to flash it like I have done for OOS 9 in the past as usual. I went to recovery (I did not backup), I just wiped my data (not internal storage), cache and system. After that I tried to install the new zip but I got an error. It just said error unable to install. Didn't mention why. I tried flashing the older OOS 10 zip and got the same error.
So I thought I will try flashing on the other slot. I was on slot B. I switched to slot A and got the same error.
So I thought I will try to sideload. When I tried that I got the same error. So I thought I will try to reflash the twrp img itself. I went to fastboot mode and tried runnning this command
fastboot boot twrp-3.3.1-14-enchilada-Q-mauronofrio.img
It showed me this error
Sending 'boot.img' (65536 KB) OKAY [ 1.609s]
Booting FAILED (remote: 'unknown command')
fastboot: error: Command failed
Now I don't have any recovery at all. I have just the unlocked bootloader and no OS nor recovery. What can I do to flash TWRP again and install either OOS 10.0.1 zip or 10.0.0 zip? Any help will be great.
Thanks
Click to expand...
Click to collapse
So basically what happened there is TWRP doesn't boot with the oxygenos 10 bootloader. You will need to use the MSM download tool to unbrick your device.
Sent from my ONEPLUS A6003 using Tapatalk
Kaleshwar said:
So basically what happened there is TWRP doesn't boot with the oxygenos 10 bootloader. You will need to use the MSM download tool to unbrick your device.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
But how is that? I was on stable OOS 10 before rooting following this link https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213. As per this, the first step is to flash twrp and that image did flash back when I did it. Any idea why it doesn't work now?
Also, do you have any links for the MSM download tool and any guide if there is?
Thanks
Arnavzz said:
But how is that? I was on stable OOS 10 before rooting following this link https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213. As per this, the first step is to flash twrp and that image did flash back when I did it. Any idea why it doesn't work now?
Also, do you have any links for the MSM download tool and any guide if there is?
Thanks
Click to expand...
Click to collapse
The problem isn't TWRP it's the bootloader. That's all I know. And for the MSM download tool. See attached link below.
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Sent from my ONEPLUS A6003 using Tapatalk
Do not boot the twrp from fastboot it won't work
Just do
Fastboot flash boot twrp.img
Then reboot the device to twrp it will boot to trwp and then flash the new a10 zip and immediately afterwards flash the twrp zip
chintu1234 said:
Do not boot the twrp from fastboot it won't work
Just do
Fastboot flash boot twrp.img
Then reboot the device to twrp it will boot to trwp and then flash the new a10 zip and immediately afterwards flash the twrp zip
Click to expand...
Click to collapse
This doesn't work. It flashes successfully but when I select Reboot Recovery and press the power button, it boots back to the bootloader.
Maybe wrong twrp img
Try the older 3.3.1-12 twrp.img and then try
Also try the following as well
Fastboot flash boot_a twrp.img
Fastboot flash boot_b twrp.img
And try just reboot not reboot to recovery
Kaleshwar said:
The problem isn't TWRP it's the bootloader. That's all I know. And for the MSM download tool. See attached link below.
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
Thanks so much for that! I have been able to recover the phone using MSM download tool. Now will update to 10 using the phones OTA.
However, I have one question, if I update to OOS 10.0.1, do you think this original post on rooting OOS 10, will work for it? https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213 Or do you suggest to not root and wait?
Arnavzz said:
Thanks so much for that! I have been able to recover the phone using MSM download tool. Now will update to 10 using the phones OTA.
However, I have one question, if I update to OOS 10.0.1, do you think this original post on rooting OOS 10, will work for it? https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213 Or do you suggest to not root and wait?
Click to expand...
Click to collapse
You can try it . Looks pretty solid.
Sent from my ONEPLUS A6003 using Tapatalk
Put the TWRP zip and stock boot img on phone (a TWRP img is not a TWRP zip)
Remove Magisk modules first to avoid issues (in TWRP if you cannot boot to system. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242)
Update through local update to 10.3.2 is what I prefer to do. Then I do the following.
Reboot to let phone finish whatever. reboot into bootloader.
1. Fastboot TWRP img - fastboot flash boot twrp-3.3.1-18-enchilada-Q-mauronofrio.img - ( https://sourceforge.net/projects/ma...3.3.1-18-enchilada-Q-mauronofrio.img/download )
2. Use volume up to recovery and power button to boot to recovery
3. Flash 10.3.2 stock boot img while in TWRP (or current ROM stock boot img).
4. Flash TWRP zip while in TWRP (https://sourceforge.net/projects/ma...-enchilada-installer-mauronofrio.zip/download ) or Blu zip (https://github.com/engstk/android_device_oneplus_enchilada/releases)
5. Reboot to recovery
6. Flash Magisk 20.3 while in TWRP
(Flash a Q kernel if you want one other than stock)
7. Reboot system
You are now rooted
Stock boot 10.3 img
https://mega.nz/#!PO5x1bYA!dKq3pbxUdpb16zhuqM_idqvWNLnsu4Ky4IAmYQiQUDw
Most stock boot imgs
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
I had similar situation last evening.
I made the mistake of having a factory reset on rooted 9.0.8 and then trying to flash the 10.0.1
I got the same error, so I had to connect my mobile to my laptop, fastboot to the newest TWRP, flash the TWRP, flash the 9.0.9, flash the 10.0.1, flash magisk 20.x and then everything was working.
xpakage said:
Put the TWRP zip and stock boot img on phone (a TWRP img is not a TWRP zip)
Remove Magisk modules
Update through local update 10.3 or current ROM
Reboot
1. Fastboot TWRP img - fastboot flash boot twrp-3.3.1-16-enchilada-Q-mauronofrio.img - ( https://androidfilehost.com/?fid=4349826312261678088 )
2. Use volume up to recovery and power button to boot to recovery
3. Flash 10.3 stock boot img while in TWRP (or current ROM stock boot img).
4. Flash TWRP zip while in TWRP ( https://androidfilehost.com/?fid=4349826312261678087 ) or Blu zip (https://github.com/engstk/op6/releases/download/r112/blu_spark_r112-oos_op6-op6t_0dd5f9228.zip)
5. Reboot to recovery
6. Flash Magisk 20.1 while in TWRP
(Flash a Q kernel if you want one other than stock)
7. Reboot system
You are now rooted
Stock boot 10.3 img
https://drive.google.com/file/d/1w44cUg815g-H1h_6gObUVPLDTc_dtiMX/view
Most stock boot imgs
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
Click to expand...
Click to collapse
This worked for me.. Finally. PS - I did in a slightly different order. I installed twrp first, booted into twrp, made sure I was in slot A. If I wasnt, I rebooted to recovery. If I still wasnt I set slot to A manually then rebooted to recovery again. Flashed the stock boot img you linked to boot, then rebooted to recovery slot b (same process I did to get to slot a) then flashed the stock boot img to boot again THEN finally installed magisk. Booted to system, where it hanged a bit, rebooted before getting into android, but booted in just fine after that..
For some reason if you don't flash stock img to slot A (and maybe slot B too, I did this for good measure) before installing magisk everything dies a horrible death and breaks, which can't even be recovered from /boot /system backups..
EDIT: Tried to reboot into recovery, which reverted back to stock for some reason after doing the above steps. So I proceeded to install the bluspark recovery, rebooted into recovery, made sure I was in slot b, made a back up of the boot image, then flashed bluspark kernel. Got stuck at the unlocked bootloader screen. Rebooted into recovery, restored my /boot back. Still stuck when I try to boot into system. Fixed it by booting back into recovery in slot A flashing stock boot img, then into slot b stock boot, then magisk, but also installed bluspark kernel here because I had a feeling I would lose twrp from flashing to stock boot img, and that the issue was caused by twrp (both twrp-3.3.1-16-enchilada-installer-mauronofrio and twrp-3.3.1-x_blu_spark_v9.108_op6 have this issue). Guess what? Turns out I was right. Having twrp breaks everything after you install magisk, so you need to flash the stock boot img before flashing magisk for some reason.. and cant install twrp again unless you dont mind bricking your phone.
EDIT2: F2FS works, just boot into recovery via fastboot (this should be slot b), change /data to f2fs, boot back into fastboot then into recovery again by fastboot (slot b again), flash stock boot img > magisk > bluspark kernel > f2fs_fstab.zip > f2fs_optimize.zip > factory reset/wipe (from twrp before rebooting), done just reboot into system. You of course lose twrp because magisk doesnt like twrp on oos 10.x for some reason, and will need to set everything up again to cause of the wipe. If you dont factory reset/wipe from twrp before booting into system your system will crash and reboot every time you boot into android, then have to do all the steps I listed again.
EDIT3: Never mind, I was wrong, f2fs makes almost all your apps and storage unusable. Not sure if it's cause of the rom (OOS10.3.0) or because we have to flash stock boot.img and get rid of twrp before booting into system. Either way, f2fs has never really been stable or fun to get working so better to stick to ext4.. that few percent performance boost isnt worth it.
EDIT4: This is my last update. After experimenting with different things, bricking my phone, restoring it via fastboot rom, many many times, I've verified the simplest and cleanest way to install magisk.. Do note you wont be able to keep twrp.
Method A - If you already have twrp
Boot recovery into slot a, flash your rom's stock boot.img, then boot into your recovery in slot b (dont boot into slot a recovery because slot a wont have twrp anymore), flash your rom's stock boot.img, magisk and (optional) your kernel of choice (or not) in that order, then you can boot boot into system. That's it.
Method B - If you don't have twrp
Boot into fastboot, and from your cmd/terminal run fastboot flash boot yourtwrp.img (I suggest Mauronofrio's twrp-3.3.1-16-enchilada-Q-mauronofrio.img or newer). Use your volume buttons to select boot into recovery. Make sure your active slot is B, (if it isnt, install twrp (bluspark and Mauronofrio's twrp both work great) by zip, then follow the steps above in method A). Once you've verified you're in slot B flash your rom's stock boot.img, magisk and (optional) your kernel of choice (or not) in that order, then you can boot into system. That's it.
Maybe @mauronofrio or @eng.stk can verify why magisk or twrp bricks the system when you install them together on OOS 10.
not working
sir i follow your steps but phone is stuck on boot i have official version a10 10.3.0 update on 25.12.19
pls tell me how i get root access....
gauravkapoor99150 said:
sir i follow your steps but phone is stuck on boot i have official version a10 10.3.0 update on 25.12.19
pls tell me how i get root access....
Click to expand...
Click to collapse
U need to flash the magisk v22 zip file through the .108 TWRP recovery
Sent from my ONEPLUS A6003 using Tapatalk
RASTAVIPER said:
U need to flash the magisk v22 zip file through the .108 TWRP recovery
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
sir can you send me a link
lemon07r said:
Maybe @mauronofrio or @eng.stk can verify why magisk or twrp bricks the system when you install them together on OOS 10.
Click to expand...
Click to collapse
@mauronofrio wrote the following in his TWRP thread a while ago:
So little update, after some tests i'm sure there is a compatibility problem between twrp and magisk, i was able to get only one of them, so actually i don't know how to proceed, i need to understand if it is a twrp problem or a magisk problem, TWRP is in stand-by for now.
There are not problems on Android Pie, if you need of the twrp on android Q just flash in boot partition the Q .img (fastboot flash boot twrp.img) and then reboot from fastboot in recovery. Before publishing the twrp I had not tested magisk and twrp together.
On Android 10 use only magisk 19.4
Click to expand...
Click to collapse
xpakage said:
Put the TWRP zip and stock boot img on phone (a TWRP img is not a TWRP zip)
Remove Magisk modules first to avoid issues (in TWRP if you cannot boot to system. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242)
Update through local update to 10.3.2 is what I prefer to do. Then I do the following.
Reboot to let phone finish whatever. reboot into bootloader.
1. Fastboot TWRP img - fastboot flash boot twrp-3.3.1-18-enchilada-Q-mauronofrio.img - ( https://sourceforge.net/projects/ma...3.3.1-18-enchilada-Q-mauronofrio.img/download )
2. Use volume up to recovery and power button to boot to recovery
3. Flash 10.3.2 stock boot img while in TWRP (or current ROM stock boot img).
4. Flash TWRP zip while in TWRP (https://sourceforge.net/projects/ma...-enchilada-installer-mauronofrio.zip/download ) or Blu zip (https://github.com/engstk/android_device_oneplus_enchilada/releases)
5. Reboot to recovery
6. Flash Magisk 20.3 while in TWRP
(Flash a Q kernel if you want one other than stock)
7. Reboot system
You are now rooted
Stock boot 10.3 img
https://mega.nz/#!PO5x1bYA!dKq3pbxUdpb16zhuqM_idqvWNLnsu4Ky4IAmYQiQUDw
Most stock boot imgs
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
Click to expand...
Click to collapse
Basically worked for me, too, with 2 exceptions:
- this tool to remove magisk modules etc. wouldn't be flashed, always ended in an unnamed error; probably the cause for some other problems?
- flashing boot.img (V 10.3.4 from this thread) didn't work for me, I always ended up in twrp's splash screen
- got it solved by dirty flashing the full V 10.3.4 ROM (again from the above thread)
Many thanks once again!
Hello
I don't know what I'm doing wrong, it's not my first time flashing a recovery/root with fastboot but I cannot flash TWRP permanently on this device.
I am on Latest EU Official MIUI ROM and here's what I'm doing:
## Recovery
Code:
.\fastboot.exe flash recovery .\twrp.img
.\fastboot.exe boot .\twrp.img
Phone boots into TWRP.
However, when I reboot and try to boot my phone with Volume Up + Power Buttons, official MIUI recovery gets launched.
If I want to boot to TWRP again, i"ll simply do .\fastboot.exe boot .\twrp.img
and here's what I'm doing for Magisk
## Magisk
### 1st Method:
I download the latest Canary Magisk Manager from GitHub repository, I install the apk and I download Magisk from Magisk Manager, then I reboot to TWRP and I install the zip from TWRP, the result is a boot loop.
### 2nd Method:
I copy the official boot.img to my phone and from Magisk Manager I select Select and Patch file.
Magisk Manager generates a patched_boot.img file, I copy that file to my computer and then I try to flash it with:
Code:
.\fastboot.exe flash boot .\patched_boot.img
the result is a boot loop again.
I can fix the boot loop with
Code:
.\fastboot.exe flash boot .\official_boot.img
What I'm doing wrong?
Can someone help?
whats your android version? and exact miui version?
Once inside TWRP you need to
reboot to recovery
Click to expand...
Click to collapse
then TWRP is persistent.