XT1225 start up in Factory mode by default - Moto Maxx Q&A, Help & Troubleshooting

Hello everybody.
Got a weird bug on Moto MAXX XT1225 - after unlocking bootloader, it's loading by default in factory mode, with CommServer active and no signal for cellular.
It can be fixed by loading in fastboot, and press "Start" from there, and then all works normal. But if I turn phone off, and make a cold start, it's happening again.
I flashed Resurrection Remix, and still have this problem, although there is no CommServer in firmware, but still no signal, till start it manually from fastboot.

Solved by flashing with stock firmware. I wish there was a simpler solution, like wipe cache/dalvik command, but specifically for bootloader.

Related

[Q] Having some major issues with my phone, help?

- A few days ago my phone freezes while I am using it, and its stuck on the google screen. at this point, it's on 5.0.1 unrooted, unlocked bootloader.
- I try going into recovery and wiping cache and doing factory reset. I keep getting errors but eventually the wipes work. Still doesn't boot though. So I do this a few times. I got it to boot twice but both times it froze within 5 mins and back to the same thing.
- I fastboot 5.0.1 factory image, goes through. but still no dice - stuck on google boot screen.
- I research and find out about the infamous power button problem. it doesn't seem like thats the issue with mine because the buttons seem to work fine. whatever, i take it to a local repair shop (phone is out of warranty) and the next day they inform me that there is no physical issue and that their software reset worked. they used the LG factory firmware way of resetting the device.
- Got the device back, used it for a while. It was fine for the time being but it was on 4.4.3 and I got the 4.4.4 update. I go and unlock bootloader, flash 5.0.1 factory image and push TWRP+root.
- Doesn't boot again, stuck on google logo
- I tried a whole bunch of stuff and nothing worked. I ended up with flashing 4.4.3 factory image in fastboot and relocking the bootloader so I could take it back to the shop the next day. At this point the phone wasn't even turning on.
- The next day (today), I tried turning it on, nothing. I put it in the charger for a while, then turned it on.... and it booted! used it for a while, it's fine.
- Did 4.4.4 system update, it's fine.
- Unlocked bootloader, it's fine.
- Tried to flash 5.0.1 factory image and again same issue - stuck on google screen.
- Been dicking around the last few hours trying to fix it ended with flashing 4.4.3 again but same issue, I then put the phone into download mode and connect to the computer but I got a green screen something about DemiGod Watchdog HW reset. I did the reset.
- Phone booted up again! Did the 4.4.4 system update and then it started freezing and rebooting withing few seconds of use. Now it's back to being stuck on google screen.
- I am obvious gonna bring it back to the shop now but any idea as to what is happening here?
nikulogical said:
- A few days ago my phone freezes while I am using it, and its stuck on the google screen. at this point, it's on 5.0.1 unrooted, unlocked bootloader.
- I try going into recovery and wiping cache and doing factory reset. I keep getting errors but eventually the wipes work. Still doesn't boot though. So I do this a few times. I got it to boot twice but both times it froze within 5 mins and back to the same thing.
- I fastboot 5.0.1 factory image, goes through. but still no dice - stuck on google boot screen.
- I research and find out about the infamous power button problem. it doesn't seem like thats the issue with mine because the buttons seem to work fine. whatever, i take it to a local repair shop (phone is out of warranty) and the next day they inform me that there is no physical issue and that their software reset worked. they used the LG factory firmware way of resetting the device.
- Got the device back, used it for a while. It was fine for the time being but it was on 4.4.3 and I got the 4.4.4 update. I go and unlock bootloader, flash 5.0.1 factory image and push TWRP+root.
- Doesn't boot again, stuck on google logo
- I tried a whole bunch of stuff and nothing worked. I ended up with flashing 4.4.3 factory image in fastboot and relocking the bootloader so I could take it back to the shop the next day. At this point the phone wasn't even turning on.
- The next day (today), I tried turning it on, nothing. I put it in the charger for a while, then turned it on.... and it booted! used it for a while, it's fine.
- Did 4.4.4 system update, it's fine.
- Unlocked bootloader, it's fine.
- Tried to flash 5.0.1 factory image and again same issue - stuck on google screen.
- Been dicking around the last few hours trying to fix it ended with flashing 4.4.3 again but same issue, I then put the phone into download mode and connect to the computer but I got a green screen something about DemiGod Watchdog HW reset. I did the reset.
- Phone booted up again! Did the 4.4.4 system update and then it started freezing and rebooting withing few seconds of use. Now it's back to being stuck on google screen.
- I am obvious gonna bring it back to the shop now but any idea as to what is happening here?
Click to expand...
Click to collapse
1.I presume the "DemiGod Watchdog HW reset" green screen came up after you gave the phone for HW servicing? If so then they could have knocked around the parts a bit to cause a hardware issue(not sure what causes it)
2.Check the MD5 of the 5.0.1 factory image.
3.Instead of factory image use the OTA zip file and flash in stock recovery.
So I used the LG tool myself to flash the firmware (4.4.3 is the only one available) and it worked fine. Updated to 4.4.4. Fine.
I then adb sideload the 4.4.4 - 5.0.1, and stuck on google logo again .................im pulling my hair out this is so weird.
gamer.11 said:
1.I presume the "DemiGod Watchdog HW reset" green screen came up after you gave the phone for HW servicing? If so then they could have knocked around the parts a bit to cause a hardware issue(not sure what causes it)
2.Check the MD5 of the 5.0.1 factory image.
3.Instead of factory image use the OTA zip file and flash in stock recovery.
Click to expand...
Click to collapse
So I used the LG tool myself to flash the firmware (4.4.3 is the only one available) and it worked fine. Updated to 4.4.4. Fine.
I then adb sideload the 4.4.4 - 5.0.1, and stuck on google logo again .................im pulling my hair out this is so weird.
1) yes this was after.
2)i tried adb sideload.. ill try that good idea.
can't flash ota.zip in recovery. only adb and that didn't work.
think i'm just gonna hang on to 4.4.4 then for now. tried everything.
Just an update. I was running 4.4.4 just fine but the phone froze and went back to the Google screen again.
bump
Might as well rma

[Q] Moto G not working

Hello.
My friend gave me his Moto G to be fixed, the cellphone doesn't turn on on most of the times (it gets stuck on a black screen after the Motorola logo) and, when it turns on, it's impossible to use it, beacuse there are lots of processes stopping. My first idea was to factory reset it directly from the system or from the recovery, but it doesn't work, it looks like it's doing something, but when I turn the cellphone on, every thing is still there (and I still can't use it).
So, yesterday, I unlocked the bootloader to try to put a custom recovery or the stock firmware on it, using fastboot. The unlocking process was ok, but I can't do nothing on the cellphone using fastboot, when I try to put a custom recovery or the stock firmware, the messages appear on the cellphone and I get only OKAY on the computer, but when I turn the cellphone on, everything is still there and the recovery is still the default one. Does anybody have any idea of what it might be?
Long story short:
The smartphone doesn't work, I cant't factory reset it through the stock recovery, nor use fastboot to use a custom recovery or factory reset it (it seems to be okay on the cellphone and the computer, but nothing happens).
Sorry for bad English.

Moto G Reboot Issue

Hi! This week my Moto G XT1045 has been rebooting itself every time I press the lock button (but this doesn't happen if i connect the phone to charge. I got this phone 3 months ago and the problem started this week. My phone Is on Official Lollipop 5.1, Bootloader unlocked, and TWRP 3.0.2-2 Installed.
I have tried data/factory reset, re-flash the stock firmware with ADB tools, and changing the ROM, but nothing.
(Also, when it reboots, I got the "No Signal" Issue, at the same time that the phone says "Error while searching for networks"
I have tried re-flashing the baseband too. And wiping cache, but NOTHING happens.
Remember: I have the bootloader unlocked, and I have NO WARRANTY from motorola. What can I do? Please help me

Issue 'stays black screen after bootanimation' - Moto G (Falcon)

Hi everyone. A friend of mine gave me this falcon to revive.
He just unlocked the bootloader and never booted again. When it starts, it gets frozen after the world bootanimation in this retroiluminated black screen.
When i go to the fastboot screen and reset the device to factory state, the phone stays the same. When i go to Recovery mode appears there's no command. And i got to press power+up several times 'til 'Recovery' pops out. But when it does, none options makes any difference (factory reset, cache and data user reset, etc).
I tried to push a rom or install with adb from this recovery, and tried to install a new rom in fastboot. No matter what i do, it always stays in this black screen after the bootanimation.
I left it turned on for a day and nothing, i charged and nothing, i try some other versions (5.0, 4.4) and nothing.
If there's something that isn't clear or any question and solutions, tell me.. i will give you any information. Thanks.
Thanks all for reading and please help!.

Help, bootloop hard to solve

Hi and thanks for reading.
My S6 is the 920p model. I had it rooted with Magisk v16.0, stock kernel, no xposed, DRA2.
Let me explain what happened.
Yesterday, I woke up because of a call sound. Once I finished talking, I tryed to unlock my phone using the fingerprint sensor. It was unlocked but suddenly it rebooted. When it booted I tryed to unlock it using the pin (obviousy), but it rebooted again.
I made a few more attempts but no luck, so I booted in TWRP, backed up my data on my laptop and made a factory reset.
Now the phone doesn't finish the boot, it only stays at "Samsung" blinking logo and the led in blue dimming, restarting again and again.
I installed the NexusOS 8.1, it booted, the phone is usable, but this rom doesn't recognize modem, so, no signal (Sprint modem not supported).
Since it works with that rom installed, I tried installing the DRA2 stock firmware wich I had installed at the beginning, but again stuck at bootloop.
Next thing I tried was using .pit file, and flashing one by one bl, ap, cp and csc. It only reached the "Optimizing apps" and rebooted again. I booted into recovery, wiped cache and reached "Starting apps" but, te phone rebooted again.
Right now I'm using it with the NexusOS rom wich is pretty, but with te Ril issue.
So, that's my problem, hope somebody help me.
Finaly solved: I just had to mark (Phone EFS Clear)
Apparently EFS was corrupt. After that, I had to unlock it. It's working properly.

Categories

Resources