I purchased a Samsung Galaxy S7 Edge from a guy off ebay with smashed the screen for a cheap price and recently took it to my local Official Samsung repair shop who repaired it for a reasonable price. I turned the phone on and it had all of the other guys personal stuff on the phone and he had a screen lock on there that I didn't know how to unlock so I did a factory reset in recovery without realising about FRP. When the phone rebooted I get the google screen asking me for the original google account credentials. I have tried contacting him and getting no joy. I have tried all of the methods in youtube but as the phone has the December 2016 security update none of them seem to work. When I plug the phone into my PC windows just says the USB device has malfunctioned and does not connect. I have installed the full Samsung USB drivers but the PC still doesn't recognise it. Could the fact it is not recognised be due to the google frp or could it be to do with the fact the phone could still be damaged from when it was dropped. Im not fussed about the USB port in normal use but it appears the only method to bypass the FRP is via the USB and using one of those methods. Can anyone help please?
I had the same problem and from my understanding all the methods are blocked now I'm trying to find out if theres a way that i just havent figured out yet i've book marked your question and will keep checking back to see if you have had any help
I know it is a tricky subject as I could be in possession of a stolen phone in which case I am rightly being locked out of it but I have the receipt to prove I have purchased it which I am willing to show to anybody who might know a way around it.
Have you tried putting it in download mode then using emergency recovery on Smart Switch?
Yes tried that earlier. Smart Switch doesn't recognise it. Just stays on the screen telling me to connect the phone even though I already have. When I plug the phone into the laptop it says the USB device (my phone) has malfunctioned and Windows doesn't recognise it. I have tried ODIN and that doesn't recognise the phone either as it isn't being given a COM number by Windows. Guess I will have to take it back to the Samsung Support Centre as I paid them to get the phone working and he said the price quoted was to get it fully working. If the USB isn't working then they can repair it!
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Ditto as him
Proof of ownership, otherwise identical to dec update. whatever you think, need the help..thanks
ash 202 said:
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Click to expand...
Click to collapse
I've just unlocked a S5 Neo.
I flashed the very first firmware version (5.1.1)
FRP lock still there BUT I could now use the side sync hack or samsung unlock APK on OTG cable.
Then flashed the latest 6.0.1 version
Did you manage to unlock it?
I have the same problem
Any good current methods for this
uninstall all drivers related and kies. Then install kies and needed drivers. See if you can connect via download mode now.
godders3906 said:
I purchased a Samsung Galaxy S7 Edge from a guy off ebay with smashed the screen for a cheap price and recently took it to my local Official Samsung repair shop who repaired it for a reasonable price. I turned the phone on and it had all of the other guys personal stuff on the phone and he had a screen lock on there that I didn't know how to unlock so I did a factory reset in recovery without realising about FRP. When the phone rebooted I get the google screen asking me for the original google account credentials. I have tried contacting him and getting no joy. I have tried all of the methods in youtube but as the phone has the December 2016 security update none of them seem to work. When I plug the phone into my PC windows just says the USB device has malfunctioned and does not connect. I have installed the full Samsung USB drivers but the PC still doesn't recognise it. Could the fact it is not recognised be due to the google frp or could it be to do with the fact the phone could still be damaged from when it was dropped. Im not fussed about the USB port in normal use but it appears the only method to bypass the FRP is via the USB and using one of those methods. Can anyone help please?
Click to expand...
Click to collapse
Try this OP.
I Found A Way To Remove FRP that dosen't trip any trips
thundastruck said:
Try this OP.
Click to expand...
Click to collapse
Have a look at my post here... How To Reset FRP (Nearly All Fones From Android 6.x.x to 7.x.x, No Trips, Flash counter inciment, Knox, Still Mode = Official, Warenty 0 (0x0000) (Still working 16 June 2017)
You see, im not all that good with programming APK files, Dalvik VM, Obex,ect, but Linux I'm your man so i figured where is the email/pass info held and is there a switch to keep it on off, ends up one of the easiest hacks i've ever done, no complicates hashed/salted double coded switch, or hard wired switch,
just a very small partition that when or if you have any google account info stored in it you get locked out till you enter the exact same info, so i just dd,d the partition after taking a backup of course lol (; then when the fone booted to download mode i noted FRP=OFF so i flashed the stock bootloader to let the fone boot all the way to video mode and YES!!! it thought it was a new fone never been used before then i check the switches/trips KNOX , device status = official, to test i just made a new google account on the spot on the phone filled all the [email protected] in then voila its working, calls, all menu items ok, official all knox fine, just the way it was when i first got it, except obviously I've upgraded to v7, hopefully this works for you, please dont use or talk about illegall activity with this, or using it for profit, it's agift I gave you's for free so i want it to stay that way, all i want is a thanks, and a beer, lol, no but seriously, when the guy that invented the hammer to ease the effort of pussing nails into wood with you hands, never got hassle about murders with them, tha fact the could be used to rob banks, rob people, damage things, smash up shops, etc so... think about it, all i done was make a tool to help people too. theres litteraly millions of exploits, including android based ones out there just now check, https://www.exploit-db.com/ , OWASP_Vulnerable_Web_Applications_Directory_Project , http://www.exploit-db.com/ , http://www.blackploit.com/ , packetstorm cve etc etc. #
This is a tool to help people how when they first got there fone, and just filled in any old stuff to get into the fun part of the fone. ie "you cannot use [email protected],com as it already in use how about [email protected],com then the password, use one lower case, one higher case, one number , one symbol, more than 12 letters but less than 20, don't use anything you talk about, your name dob etc etc etc , so most people just pick the random one google pumps out and tries random passwords till one goes through, "I've seen this done a few times with my own eyes and had to stop them and explain and this was b4 FRP" Also if you change one letter in your google password, Factory reset your fone, your locked out if the fone never got the change in time, try it, Anyways if people use this for illegal purposes its there evilness there using not mine, there just using my tool as well as the thousand of others in the arsonry, even the OS check out "kali linux OS", "Parrot OS" "Blackbuntu OS"," BlackArch Linux" Also say you code a program to check hashes at a faster rate to speed up logins etc, a hacker will use it to check stolen passwd lists faster, if a faster CPU is made, the first thing a hacker thinks of is how many words/letters it can do a second so they can bruteforce the wifi key of the local bank, hospital etc.... so?
tried EVERYTHING ....
I have the USCellular G935R4 .... S#iiiit , like I've even gotten to the actual HOMESCREEN , but no matter what I do it wont do it.. i can access just about any app and the settings accurately every single time within seconds-mins, even tried flashing it, even had FULL access and control over it using sidesync, and i tried rooting it from oneclickroot on pc but thennnn knox trips and won't let me enable developer options.... And got the error with "sign in using email and password" on quick shortcut maker , PLUS tried everything to fix the error by reinstalling google account manager , etc ...
But NOTHING ...
If ANYONE has any idea how to successfully do get into it , Pplleasee let me know!
???
Seriously ,
I swear , I'll even pay someone ...
Try flashing the phone to the latest MM via odin and try bypassing. I tried it on my G** da** S6 with may 2017 patch. Dowgraded into latest MM and tried different bypass and it worked.
any help in 2020
ash 202 said:
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Click to expand...
Click to collapse
cany help in 2020 S7 Att frp removal PLEASE
Hi Guys
My pin for my lenovo tab 3 8" is not working, I know pin I have it written down but after the tablet was off for a month it says wrong pin, I have some apps I really need to access the data and I also really need my photos
I have been going around in circles trying to figure it out, It auto connected to my phones hotspot so I used google find my device and told it to lock it with a new password but that didn't work the lock message came up but the old pin is still there
As far as I can tell I don't have usb debugging enabled, I can not believe I am just locked out of my device like that with no way of getting at my data
I would really appreciate any help or advise and will gladly reward anyone that helps me get in
Thanks
Hi Gurus.... Hoping someone can help this non-developer. I work for a company who gives its employees Samsung devices. When the person leaves the company I am getting back these G920V devices with the Samsung activation lock or google lock on and no way to access the accounts to turn them off.... got more than a handful of S6's that I can't reuse. All I would like to do is pull off the activation locks and then make sure the phone is updated with the correct Verizon/Samsung software that can get android and Verizon updates (and does not come across as a custom OS)... Have downloaded a few files here and there but I need to know a process that works and I can't figure that part out. I have both 7.0 and 6.0 devices.... Any advise would be appreciated!!
Have the same problem. Bought on ebay, and its appears to be locked with samsung account ;( Seller do not answering ....
Did you solve this problem?
chachy said:
Have the same problem. Bought on ebay, and its appears to be locked with samsung account ;( Seller do not answering ....
Did you solve this problem?
Click to expand...
Click to collapse
Nope... crickets.... Sorry...
Thought this Might Help.
Found these FRP tools for you. Give it a shot.
Password: www.gsmhagard.com
you will need to have Microsoft .NET Framework 4.5.2 installed on PC also.
Hope this helped.
rocknonstop
found another set of tools for you. I'll keep this Google Drive link active for a little while.
S6-S7-S7Edge-Note-5-Note7-FRP-Bypass-Tools-S7fanClub.com
SM G920V dont appear
Hello, I recently found an LG Stylo 3 in one of my drawers that has a knock code on it. I don't remember the code and I already tried 66 times to unlock it (it now takes 240 seconds between each attempt). No "Forgot Password" or backup pin option shows up, USB Debugging is on but it's unauthorized, and the mode that it's on when I connect the phone to my PC is Charging Only. I just want to know what pictures I have saved on it, or if I can pull out my photos or something. I can't reboot into bootloader from the recovery options, it just reboots my phone. I'm able to go into recovery, and safemode, update from adb puts it into sideload mode, and it's connected to my wifi but because I changed my passwords on my google accounts already, the phone doesn't show up in any of my google device manager accounts.
Everything is stock, no custom recovery or firmware and it's not rooted.
What can I do now? Is there a way to reset my password or bypass it entirely? I don't care how technical it is, if given a good guide I can do it. I can't find anything to help me, hopefully someone can help my problem here.
Before anything, I didn't steal the phone, it's my old phone I had when on Virgin Mobile, I can give as much proof as I can to show that it is my phone if needed. I just don't remember the knock code
Thanks!
Hello all,
I know already that this might not be possible but I have to ask anyways. My father recently passed away unexpectedly and he has just recently bought a galaxy flip 4 (before he had a galaxy S21).
Now he still has some photos on there he recently took (Google backup is off).
I already tried unlocking the phone via Samsung find my phone but I always get the message, that the function is not enabled in the phone.
Same goes for the S21 which I also can not unlock.
The time between unlocks is already at 48h because I've tried all the numbers I could find around the house.
Is there a possibility of either:
1. Unlock the device by rooting or patching a file in recovery mode or someway else?
2. Is it possible to enable the unlock function for find my phone somehow?
3. Is it possible to reset the counter for failed unlock attempts? Because I have the feeling it has no upper limit and will just double in time forever... I may find the correct pin eventually but I need more tries.
If any of the above is possible for the S21 then this would work too because he just switched phone 2 days before he passed and the files are still pretty much identical.
If you can help and need proof of possession or anything from me to proof that this is indeed the phone of my dad please write me a pn.
I would really love to have the last pictures taken ...
I'm so sorry about your loss. I have great news! I've recently had to bypass the FRP Google lock and after many hours of research, I was able to finally find a reliable program that was free and free of viruses. I can confirm it works on the Flip4 because that's the phone I used it on. https://samfw.com/blog/samfw-frp-tool-1-0-remove-samsung-frp-one-click
G_Wiz94 said:
Hello all,
I know already that this might not be possible but I have to ask anyways. My father recently passed away unexpectedly and he has just recently bought a galaxy flip 4 (before he had a galaxy S21).
Now he still has some photos on there he recently took (Google backup is off).
I already tried unlocking the phone via Samsung find my phone but I always get the message, that the function is not enabled in the phone.
Same goes for the S21 which I also can not unlock.
The time between unlocks is already at 48h because I've tried all the numbers I could find around the house.
Is there a possibility of either:
1. Unlock the device by rooting or patching a file in recovery mode or someway else?
2. Is it possible to enable the unlock function for find my phone somehow?
3. Is it possible to reset the counter for failed unlock attempts? Because I have the feeling it has no upper limit and will just double in time forever... I may find the correct pin eventually but I need more tries.
If any of the above is possible for the S21 then this would work too because he just switched phone 2 days before he passed and the files are still pretty much identical.
If you can help and need proof of possession or anything from me to proof that this is indeed the phone of my dad please write me a pn.
I would really love to have the last pictures taken ...
Click to expand...
Click to collapse
I'm so sorry about your loss. I have great news! I've recently had to bypass the FRP Google lock and after many hours of research, I was able to finally find a reliable program that was free and free of viruses. I can confirm it works on the Flip4 because that's the phone I used it on.
SamFw Tool 4.7.1 - Remove Samsung FRP one click
Hi Today, we introducing SamFw FRP Tool version 4.7.1 Main function: Remove FRP with one click Change CSC with one click Remove FRP for new se...
samfw.com
Thanks a lot, I will give it a try!
@melymoon
I've tried this tool but I can't get into the engineering mods by entering the code into the emergency call pad.
Therefore the tool doesn't detect my phone.
It is also not recognized if I go to ADB update in the recovery menu.
How did you do it?
I got you, do you have time right now? I can work on it with you before my kid wakes up
You don't need the engineering service menu right right now, to remove the lock. I'll walk you through it.
I have a z flip 4 5g and I'm locked out of it and I cannot factory reset it and I do not have on USB debugging. Is there a way to enable USB debugging on locked z flip 4?
Can't you just factory reset it in the recovery menu?
I thought the whole idea of this post was to save the data? Everything mentioned here pretty much is gonna wipe the phone. Which leads to all that's trying to be done is bypass factory reset protection. If you have death certificate you can get Google and samsung to release the locks accordingly and it can be factory reset from the recovery menu.
From there. Frp bypass is a very gray area on xda and most people will not help.
melymoon said:
You don't need the engineering service menu right right now, to remove the lock. I'll walk you through it.
Click to expand...
Click to collapse
I'm in the same boat and have everything installed and ready to go. Is there any chance you could assist? Many thanks