So i have a op7p with open beta 1, but when I tried to root it, I cant boot up and gets stuck at the boot animation but in 30fps instead of the intended 60, and Im stuck there and the phone wont boot.
In case that went too fast heres what happened:
I extracted boot.img from ota pack and patched it with magisk manager Canary
Then i went to twrp and flashed it, it do what its suppose to, but instead, play the boot animation incorrectly and stucks there until I force shutdown and flash the stock boot.img
Try the patched stock boot image from here: https://forum.xda-developers.com/on...isk-patched-boot-image-oneplus-7-pro-t3964345
Related
I wanted to root my OP6 and entered fastboot mode.
I successfully flashed the bluespark img from Terminal and installed the Bluespark ZIP file from this link
After rebooting, it got stuck on the bluespark logo and when I tried to reboot the system, the phone got stuck on the Bootloader unlocked screen.
I tried to repeat the process and this time flashed the TWRP lastest version. Now its stuck on the TWRP logo screen.
Then I browsed around and found these stock boot recovery img files,
After flashing the latest one, the phone got started properly but everytime I restart the phone, its getting stuck on the Bootloader warning screen and the recovery options are still stuck at TWRP image.
If nothing works, have a look here
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
So I've been on the Global Indian MIUI for a while now. And what I usually did was I patched a boot image file using Magisk and then flashed it through fastboot. That way I didn't need a custom recovery and I could get straight updates from MIUI as usual.
After updating to MIUI 10.3.13 I tried to do the same thing once again, but this time I'm met with a Bootloop. The bootlogo shows and the boot animation starts and then suddenly phone reboots and it keeps going on like this until I flash back the stock boot image.
So I installed TWRP and tried flashing Magisk from there but same result. Goes into bootloop. Tried flashing the patched image file from TWRP but end result still same.
So any solution to this? Or any rooting alternative other than magisk?
Is anybody else facing this or are is it just me?
I'm not sure what's wrong here but I patched a OxygenOS 10.0.1 stock boot img awhile ago and when I flash the patched boot img to get root, everything is normal but after a few days or a couple hours for some reason it'll revert back the stock boot img and I'll lose root and also my kernel will go back to the stock one.
Slot issue? maybe it crashes and reboots in the other slot
Instead of using patched images just boot to twrp and run the twrp installer then the magisk installer.
My pixel 3a stuck to the loading screen after flashing the magisk patched boot.img.
Used magisk manage V23 stable
boot.img obtained from OAT image sargo 210805.001
I already tried flash to both slots but did seem to work either. Phone starts normally if flashing back to the unpatched boot.img
Does anyone else have the same problem?
Thanks!!!
The loading screen may take several minutes, be patient. If really stuck, there is something wrong with the magiskboot.img. You need to flash back boot.img and do the rooting again, try beta version channel in Magisk app.
Okay so I was rooted on Android 12 did the OTA patch in magisk before upgrading to Android 13. I was stuck on the logo for a very long time so I flashed the original Android 13 Boot and booted back up. So then I extracted the boot image and patched it in the magisk app and then flashed it and the same thing happened stuck on the logo. So I flashed the original boot image and booted back up. Next I found a modified version of TWRP so I was able to boot into it using fast boot everything was working within TWRP. I tried to flash magisk through there and it was a no-go I assume it's not possible to root Android 13 at this moment so I'm going to downgrade back to Android 12. If anybody has any ideas or suggestions or if you were able to keep Root let me know how you did it please
Use magisk 26.1 and patch boot.img. it will work. Twrp will be replaced by regular recovery. If you want twrp use "fastboot boot (twrp.img)" command from pc and dont replace recovery to twrp or you will lose magisk root
Please boot to twrp, go to /data/adb/modules and disable all of them by executing "touch disable" in each module folder. After this try booting with magisk patched boot.img, it should work.
chairman011 said:
Okay so I was rooted on Android 12 did the OTA patch in magisk before upgrading to Android 13. I was stuck on the logo for a very long time so I flashed the original Android 13 Boot and booted back up. So then I extracted the boot image and patched it in the magisk app and then flashed it and the same thing happened stuck on the logo. So I flashed the original boot image and booted back up. Next I found a modified version of TWRP so I was able to boot into it using fast boot everything was working within TWRP. I tried to flash magisk through there and it was a no-go I assume it's not possible to root Android 13 at this moment so I'm going to downgrade back to Android 12. If anybody has any ideas or suggestions or if you were able to keep Root let me know how you did it please
Click to expand...
Click to collapse