this is for nokia x2 rm1014 single sim prototype
for who dont have original protoype firmware,dont want use prototype rom with password and red line on screen,flashed another firmware and no signal- sim offline .
because this unit use old modem. it doesnt run retail modem
request:
rm1014 single sim,hwid 0444 f1
baseband 185103.2, firmware 0.1421 or 0.1422
this port base on NokDroid of FrozenTears : https://forum.xda-developers.com/nokia-x2/development/nokia-x2-custom-rom-t2970271
4.3 stock stable than cm11 for x2 ss rm-1014
no bugs
link: https://mega.nz/#!nNdziQiR!698ck2clQ8cOfHrDWfCKp5RKaW_quqlo9uQLKYg9oiI
kernel source: https://github.com/cm-nokia-x2/android_kernel_nokia_msm8610/tree/RM-1013-2.0.0.11
How to fix random reboot in cm12.1 on Nokia x2
nokdroid,lollyblack,nokperia,simonoid,wp8x,lolipopmod ported to 1014
https://drive.google.com/open?id=1uMYdr26NwOnduEGwS3wHVMerEi2VFQWa
X platform 2.0, yumod 1.4, stock 2.1.0.11 odex/deodex done
I ported all 4.3 rkm
Related
Hello all,
I have been emailed from iOcean with download link for iOcean X7 elite new ROM 1123.
Here is download link:
mega.co.nz/#!fhZyCSCI!YhnkbEsbMdS_nnYUJd3ESmRE-xF_Ts4hsDRKLgqRtlI
write https:// before
"About" data :
Baseband: MOLY.WR8.W1248.MD.WG.MP.V7.F2.P3 2013/11/19 15:41
Kernel: 3.4.5 de Sat Nov 23 15:56
Compilation: X7_3.0_13_20131123-155831
There's another MIUI 1126 but they said it is not working properly yet
"'m not sure MIUI 1126 ROm could working.
I give the link the latest and stable, we improved the camera , and add more language and made the system more stable."
Instructions to install inside. Applying update means lose all data. Backup recommended.
By the time being ROM is working properly
Could work for Plus version, but I have only Elite (see ZIP name)
Regards
First of all, here's some info about my current setup:
Device: Moto G (XT1033) Dual Sim
Running:
Android Lollipop 5.0.2 CrDroid 2013-03-13 build
MultiROM v31 installed (as specified here.. Flashed the HybridLP kernel specified in the 2nd post)
I have successfully installed FIUI based on 4.4, as my secondary ROM via MultiROM TWRP recovery. It runs smooth and with dual-sim support.
However, when I installed MIUI v5 RTM4 for falcon (downloaded from the MEGA mirror) and booted into it, there was no sim card connectivity... There were exactly 2 FCs saying "com.android.phone has stopped working" (one for each sim, I guess ) when I booted into the ROM...
Can anybody help me out by telling why that's happening?
MIUI v5 and FIUI v2 both seem to be based on Android KitKat 4.4.x, then why does MIUI v5 show FC on SIM connectivity?
Is there any way to patch this? Some other kernel maybe?
I'm kind of a newbie in the technicalities.. But would appreciate every bit of help provided
UPDATE
Tried flashing the following kernels on top of the secondary MIUI ROM:
Xperience-17-MIUI kernel
DonkeyKang Version 3.8 - CM11/Aosp KITKAT - [03/01/15]
Sadly, no change!!!
Please help me out guys...
Really?!? No one can help me?
Can someone at least point me to some help to install MIUI on the Moto G which is already upped to 5.0.2!!
I've bought huawei g6 today, this is current firmware
Android version - 4.3
Emotion UI version - EmotionUI 2.0 Lite
Baseband version - 203017
Kernel vers - 3.4.0+
Build number - G6U10...
Custom version - CUSTC...
but I really like how EMUI 3.0 looks, what do you think about upgrading is it worth it, the phone is stable and fast now, have somebody installed new fw yet and where I can find it?
Thanks in advance
This rom has been powered by http://mtkroms.com, the original rom can be found at http://www.mtkroms.com/2015/07/lightweight-lollifox-rom-for-mt6592.html
LolliFox:
Mlais M9: Kitkat firmware: https://drive.google.com/file/d/0B04SC-zsoiayVnVrMlFUZ3dTeEE/view?usp=sharing
Fast kitkat rom.
This rom has been powered by http://mtkroms.com, the original rom can be found at http://www.mtkroms.com/2015/12/pussyfap-v4-beast-edition-for-mtk.html
Mlais M9: pussyfab v4: https://drive.google.com/file/d/0B-Ceu9-5gYk0ZWh2RzBOSmZSS1k/view?usp=sharing
Fast, tiny kitkat android 4.4.2 rom.
Edit: non plus users must do a factory reset after flashing the rom.
ps. another pussyfab:https://drive.google.com/folderview?id=0B-Ceu9-5gYk0RnVfMGgzYWRaSXc&usp=sharing
The original pre loader modded rom kitkat 4.4.2 is also very rapid (i installed z-ram precated from google store) and it has no bugs, so try it: https://drive.google.com/file/d/0B04SC-zsoiayRW9pS0tpQjFrOGM/view?usp=sharing
CM11 for Mlais M9
This rom has been powered by http://mtkroms.com, the original rom can be found at http://www.mtkroms.com/2015/09/cyanogenmod-11-for-mt6592-and-mt6592m.html
CM11 for Mlais M9: https://drive.google.com/file/d/0B04SC-zsoiayX25weWFjUVNWeDg/view?usp=sharing
This rom has been powered by http://mtkroms.com, the original rom can be found at http://www.mtkroms.com/2015/12/asus-zenfone-2-ui-for-mt6592.html
Asus Zenphone rom for Mlais M9: https://drive.google.com/file/d/0B04SC-zsoiayakdLTE5nb3VsZE0/view?usp=sharing
edit: disable swiping. Really fast boottime. 300 circa MB RAM memory in use, so 600 MB RAM free idle.
mark-1978 said:
This rom has been powered by http://mtkroms.com, the original rom can be found at http://www.mtkroms.com/2015/07/lightweight-lollifox-rom-for-mt6592.html
LolliFox:
Mlais M9: Kitkat firmware: https://drive.google.com/file/d/0B04SC-zsoiayVnVrMlFUZ3dTeEE/view?usp=sharing
Fast kitkat rom.
Click to expand...
Click to collapse
between the:
LolliFox
pussyfab v4
the original pre loader modded rom kitkat 4.4.2
what's the best/fast rom?
Can I install it straight in the mlais m9 plus ?
thanks
Trinotet said:
between the:
LolliFox
pussyfab v4
the original pre loader modded rom kitkat 4.4.2
what's the best/fast rom?
Can I install it straight in the mlais m9 plus ?
thanks
Click to expand...
Click to collapse
have the idea, pussyfab v4 is the fastest. Yes with Philz touch recovery you can just wipe everything and install it.
MiuiPro 5.5.12.10 for Mlais M9
Working version for the Mlais M9 from this month (december 2015):
Download: https://drive.google.com/folderview?id=0B-Ceu9-5gYk0YXZfa2ZYRkZHN2s&usp=sharing
Working version.
Marshmallow themed rom for Mlais M9
Based on kitkat rom: https://drive.google.com/folderview?id=0B-Ceu9-5gYk0dk4xaUN3dmNYT0E&usp=sharing
Ukrainian firmware Mlais M9 Normal speed
Lite version (not real fast) and minimal version (rather fast) Download: https://drive.google.com/folderview?id=0B04SC-zsoiayY05rNjd4aDRXSXM&usp=sharing
China semi s5
Kitkat rom, nice and fast(s5): https://drive.google.com/folderview?id=0B-Ceu9-5gYk0bXJiWkRSMEFVVDQ&usp=sharing
kitkat s6 is not that fast, also not that neet. Further i was busy with a cm12.1 rom, but that is a hard nut to crack. I wonder if even on the port device the rom works.
HTC rom for Mlais M9 (long boottime): https://drive.google.com/folderview?id=0B-Ceu9-5gYk0UHYxVDdkaF9XN0k&usp=sharing
Porting to Mlais M9
when porting and found there errors, just copy over the port rom.
S4 semi china very good reception
ported from mt6582: https://drive.google.com/open?id=0B-Ceu9-5gYk0bXJiWkRSMEFVVDQ
Mlais Mystic os v7: https://drive.google.com/folderview?id=0B04SC-zsoiaybVktakxheXFaR1U&usp=sharing
mark-1978 said:
Mlais Mystic os v7: https://drive.google.com/folderview?id=0B04SC-zsoiaybVktakxheXFaR1U&usp=sharing
Click to expand...
Click to collapse
On the mlais m9 plus:
the front camera dont work.
Rear camera work with the 13mpx.
Sms send and received work.
3g work
Can't make calls only receive.
After can't make call i have not tested any more. maybe more bugs...
works fine on mlais m9 standard version.
mark-1978 said:
will fix the microphone bug.
Click to expand...
Click to collapse
The micro works, the bug its not make calls, i press to make the call but never gives the connecting... if i receive a call i can accept the call and can talk and ear the other person.
Another kitkat version. Nice background further some build.prop tweaks. There is a phone error, but after one ignore it doesn't show up again.
Cleanrom, another kitkat rom. Need gapps 4.4.2 to make use of appstore. Fast rom!
Cleanrom with better cameraresolution.
AOSP FOR NOKIA X2-JUPOLLAR
this ROM can't run on Ara. I tried flash rom: RM-1013 retail,RM-1014 1GB,512MB,RM-1015 1GB but it cant boot.
I tested it on RM-xxx 1 SIM,512MB pre B1,a back button. Rm-1013 2 SIM,512 MB
Everything work fine on 2 device. Different is RM-xxx just have a back button,no distance sensor, no proximity sensor. I need enable navibar to can use home,recent button and it dont auto turn of screen when make a call
This ROM is backup from RM-1013 2 SIM,512MB with rooted
For RM-xxx pre B1. I was modified system to can use on it
How to install:
Flash Philz CWM Recovery
Flash ROM
Flash Root or Gapp if you want
reboot
Link download: post 2
Picture: post 3
DONT TRY FLASH ON ARA, IT DONT BOOT. IT JUST FOR JUPOLLAR WITH OLD HARDWARE
kernel source : https://github.com/cm-nokia-x2/android_kernel_nokia_msm8610/tree/RM-1013-2.0.0.11
XDA:DevDB Information
[ROM][LEAK] AOSP 4.3 for Nokia X2-Jupollar, ROM for the Nokia X2
Contributors
thinhx2
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: F1.1 and down
Based On: Aosp
Version Information
Status: Stable
Created 2018-11-23
Last Updated 2018-11-23
Link AOSP 4.3 ROM
Philz recovery: https://forum.xda-developers.com/nokia-x2/general/cwm-nokia-x2-t2850273
ROM: https://mega.nz/#!eAkgkaxJ
full backup file: https://mega.nz/#!6NVVnCiI
Picture
RM-xxx pre B1 build with RM-1015
AOSP 4.3 with CM-11 4.4
What not working:
RM-1013 2 SIM,512MB:
sim 2 slot not work
RM-xxx 1SIM, 512MB preB1:
no distance,no proximity sensor, dont turn of screen when make call
this proto only have a back button on touch screen panel,need enable navi bar
no glance,no doubletap
ROM preB1 12/2013 Nokia v1351: just public, dont try flash, cant boot on ara,buggy, unstable,missing so much driver:
ROM: https://mega.nz/#!HJcnjCKA
full backup: https://mega.nz/#!WMcVkIDa
ROM F1.1 2/2014 Nokia v1406: stable than v1351, no lock screen, no home button. roration,glance,doubletap work fine
ROM: https://mega.nz/#!GIFnFaxL
restore via Philz Rec
hello,today i ported FW1421 to X2 preB1
Big info: i ported 2.1.013 and it full working on preB1
no home button,no distance sensor,no proximity sensor,no front camera because hardware dont have it. system working fine
Can't download ROM
thinhx2 said:
ROM F1.1 2/2014 Nokia v1406: stable than v1351, no lock screen, no home button. roration,glance,doubletap work fine
ROM]
restore via Philz Rec
Click to expand...
Click to collapse
Good day, I saw your ROM and link to download it, but you put description key. So, how I can get ROM? It's paid or something? Thank you
Dethmon said:
Good day, I saw your ROM and link to download it, but you put description key. So, how I can get ROM? It's paid or something? Thank you
Click to expand...
Click to collapse
It free but not for x2 retail- Ara. Just for x2 early prototype - jupollar. I tried port bootloader of x2 prototype to x2 retail but i doesnt boot