i accidentaly installed a wrong magisk module and now my oneplus 7 pro is as totally dead. no recovery mode, no fastboot. I cant even get edl to work...
connecting the phone to a computer shows it being visible as qualcomm hs-usb diagnostics 900E. I tried using msmdownloadtool but it wont show up as connected in there. I am out of options, and really desperate.
Wonderfull smart people from the xda forums, any idea's?
(I dont think i have the t-mobile version)
I had this issue earlier today before finally getting the MSM tool to see it. It took me switching between my laptop and desktop. Also switched out the usb cable. Not saying it will work for you, but good luck.
I do have the T-Mobile version. I was going from International back to T-Mobile software.
Related
Hi all
Found new firmware for my Lumia 710. Tried to flash it with the help o Nokia Care Suite, but the PC started to install new drivers, and driver "Qualcomm CDMA Technologies MSM" failed to install.
Now, when i try to flash my phone it reboots, gives short vibrate and nothing else. NCS says that it failed to change the mod. Windows founds my phone as flas drive and wants to format it in order to use. And i've to put out the bettery and turn on the phone.
I've alredy flashed the phone twice and everything went ok. Tried to reinstall Zune/NCS/Windows. Changed USB ports, reset the phone. Nothing helps. Tries to change the USB mode from Zune to Serial, tried to flas it in rocovery mode. All the same. Windows says that problems in this drver.
Hope for your help,
vlad
xorizont said:
Hi all
Found new firmware for my Lumia 710. Tried to flash it with the help o Nokia Care Suite, but the PC started to install new drivers, and driver "Qualcomm CDMA Technologies MSM" failed to install.
Now, when i try to flash my phone it reboots, gives short vibrate and nothing else. NCS says that it failed to change the mod. Windows founds my phone as flas drive and wants to format it in order to use. And i've to put out the bettery and turn on the phone.
I've alredy flashed the phone twice and everything went ok. Tried to reinstall Zune/NCS/Windows. Changed USB ports, reset the phone. Nothing helps. Tries to change the USB mode from Zune to Serial, tried to flas it in rocovery mode. All the same. Windows says that problems in this drver.
Hope for your help,
vlad
Click to expand...
Click to collapse
If you are still having installation problems with the qualcomm drivers, you might like to see this post: http://forum.xda-developers.com/showthread.php?t=1669498
Picked up a used LG Volt from eBay for cheap, seller said device is user-locked. First thing I noticed is this is a Boost phone and there is a Sprint sim installed. Thought someone might have been monkeying with the internals. The phone is pattern-locked. I have tried every conceivable combination of button presses/holds and the device will NOT enter recovery mode. All I get is the LG logo coming on and the notification light glowing, then the logo and light disappears, then the logo comes on for a couple seconds then back off again and keeps repeating this cycle.
I connected it to my PC but, since I can't unlock the screen I can't set the phone as a removeable drive and it does not connect to the PC. I have installed the LG Drivers and tried to put the phone in DL mode, however, it is still not recognized by the PC. If I open up device manager on my PC and then plug the phone in the device manager rolls up and back down again like it is trying to figure something out, but the device still does not show up . I have installed/uninstalled the drivers and rebooted my PC several times in hopes that it would connect. I have tried a couple of Android managers on the PC but they don't recognize the Volt either. I have booted the PC into Linux and tried to work with it there but, again, it is never recognized. I have read several post concerning flashing in DL mode, even installed LG Flash Tool, but since the Volt isn't recognized the procedure comes to a halt. I read about ADB but I can't unlock the phone to set debugging and, I believe, the phone needs to be recognized by the PC.
If I could just get past the pattern-lock or get the PC to connect to the phone I feel I might have a chance fixing it.
Hi,
Thanks for using XDA assist.
There is a dedicated thread for you to post this question:
New LG Volt LS-740
Over there, you can receive specialized help from experts.
Good Luck! - gsstudios
Hello so my op6 got bricked and i cant log into os..so i used msm download tool went into msm mode and the phone doesnt get recognised by windows..i even changed from windows 10 to 7 but no fix..i have installed all the drives and QLoader 9008 but still get a warning on device manager that cant install device properly!pls help!thnx
https://forum.xda-developers.com/oneplus-6/how-to/guide-mega-unbrick-guide-hard-bricked-t3796051
you are using the original cable?
I have searched for 2 days now and tried countless fixes for this issue, even fixes that have nothing to do with the phone. When I plug my 7 pro into my Windows 10 desktop it is instantly recognized and I can access files. When I plug in my 8T I get "USB device not recognized."
It's actually more complicated than that though. I tried using a different cable, it worked for a bit. It loaded and I could access it. Cool. Went to the MSM tool to flash the global rom and right as it started going the phone disconnected and the "USB device not recognized" error popped up. Now the phone is bricked. Black screen, doesn't vibrate when I plug it in. Can't unbrick it with the MSM tool as it's not a recognized USB device and isn't connecting with the computer.
Tried connecting it to my Samsung Galaxy Book 2. Same thing. 7 pro is fine, 8T isn't recognized.
I have tried removing and reinstalling drivers. I have tried unplugging the computer and all cables. Tried several other things. Searched youtube, google, duckduckgo, this forum, oneplus forums, and asked at r/oneplus and got no reply from anyone.
Can this be saved?
Update: Connected another OnePlus 8T to my computer and it popped up an option to install drivers from a cd that doesn't exist. It seemed to think the phone attempting to install drivers was coming from a CD. Never could get it to work, used the .exe file I already had and installed drivers and now that phone is recognized and I can access the files. This never happened with the other phone. It was errors from the start.
Hi guys, long story short.
Installed Android 12 Beta, wanted to go back, tried to go back the the oxygen updater = phone fully bricked.
I can start the mobile with the first android start-up screen coming to live then it dies, I can access fastboot with vol up+down+power pressed but I can't do anything more.
I tried EVERYTHING to get MSMDownload tool to recognize my mobile but it does not, I don't think EDL mode is working for me.
Any ideas? I've read all the threads here I think and nothing works.
Couldn't connect to msm op9 global. /Now connecting. !
Ive uploaded signed Qualcomm driver's I found that install on windows and don't turn on test mode. These work. Then afterwards toggle USB options with device plugged in PC ,change from charging to PTP and let it automatically install drivers...
forum.xda-developers.com
mattie_49 said:
Couldn't connect to msm op9 global. /Now connecting. !
Ive uploaded signed Qualcomm driver's I found that install on windows and don't turn on test mode. These work. Then afterwards toggle USB options with device plugged in PC ,change from charging to PTP and let it automatically install drivers...
forum.xda-developers.com
Click to expand...
Click to collapse
I've actually tied that, does not work. I cannot get the Qualcomm to show in my device manager at all, the only thing I get is when I go to fastboot I get the Android Bootloader Interferance to show.