I have a Moto G4+ and recently the Samsung 32gb EVO+ SD card in it is not always recognized. Rebooting always solves the problem, and reseating it is not a permanent cure.
The card is set for "internal storage" meaning it is encrypted and cannot be read in any other device including my Windows 10 PC.
I want to clone the card's contents onto a new SD card (which hopefully will always be recognized), but cannot find any way to do it. While I can copy the contents of the card to my PC via a USB cable connected to the phone (for file transfer), it cannot be copied back to fresh SD card in the phone if it is formatted for "internal storage."
No cloning software (like EaseUs, Acronis) can recognize the card if put in a card reader in a USB port on my PC, and therefore neither its image nor contents can be copied to a PC or to a fresh SD card in another USB slot on the PC in its encrypted format.
If I put the fresh SD card in the Moto and format it for internal storage use, I cannot any transfer files to it from the PC via wired connection.
So... is there any way to clone my original SD card set for "internal storage" to a new card?
Thanks,
Edgar
Related
I have a micro SD card and a SD card connected to my Transformer/dock. Only the micro SD card shows up in Windows, as the "MicroSD" folder, when connected to my PC despite Android seeing both cards. Other threads mention that a "SD Card" folder should show up, but I don't have any such folder. I'm able to copy files to it on the tablet itself and alotcat shows the system mounting/umounting it when I insert/eject the card. Trying the cards one at a time (SD inserted and micro SD ejected) also didn't help.
I'm running the latest FOTA, completely stock.
I've had this same problem. SD card is inserted in the dock, but when hooked up to my computer, its not accessible. MicroSD card is, but not the one in the dock. Same for External USB devices hooked up to the dock. My guess is that they aren't mounted via the mtp. I tried rebooting the tablet with the card inserted and hooked up but still no go. Running Prime 1.3 and newest firmware for the keyboard.
I have been trying to fix this problem for a few hours now with not result.
Last night I went from an one click unbricked stock rom on my infuse to CM10.
Before CM10:
Normally when I plugged the phone into my computer two removable drives would be recognized by my computer but would not be accessible until I triggered the USB storage from the phone. When I do that I would have access to the 16gig internal SD card on the phone which is now sdcard0 and I would also have had access to the 32gig external SD card that I have in the expansion port.
Now:
My computer still has two removable drives pop up when the phone is plugged into the computer. However I can only get into the internal SD card on the phone. When I click the Removable Disk H icon for my external 32 gig SD or sdcard1 I get a please insert disk error.
To sum it up. I am able to transfer files back and forth between the two disks on the phone. I can access everything on each SD card. I still have an external_sd in the file list but it is now just a folder with a few files in it instead of the external sd cards contents being there on the stock rom. For some reason the phone isn't mounting the sdcard1 as its own removable drive when I connect USB storage to my computer.
I am going to continue looking for an answer on my own in addition to what ever help I receive here
Thanks for reading in advance.
Hi. I'm using my SD Card formatted as internal storage and yesterday my phone stop detect it I try to romove and put again, restart phone and it's not work. I have important data on this card, so anyone knows how can I extract them? External reader or something? Please help.
On windows, use EaseUS Data Recovery Wizard
It'll work when I formatted card as a internal storage (when you insert a SD card for the first time on a Marshmallow device, you can choose to either use the card as Portable Storage or Internal Storage)? That's main problem... And if yes, how can connect this card to PC when my phone didn't recognize the card?
Hi folks,
I have an SD card here that I was using for Adopted Storage but I've managed to get it stuck as an "adopted" card and can't seem to get it back functioning as a normal SD card
Long story short... I wiped the device the card was in but I didn't "unadopt" the SD card before hand - as in set it back to portable mode. While the device could recognise there was an SD card afterwards, it couldn't prepare it for use and suggested a card error or something to that effect.
I figured I'd just pop it in my laptop (Windows 10 x64) and re-format it but this didn't work. Failing this, I decided I'd "nuke" it using Minitools Partition Wizard. While this program had better luck identifying the card, could display and delete the partitions on it and could run the Wipe task - it had no effect on the card... the partitions just re-appear after any attempt to nuke them!
Has anyone any ideas about how I can restore this card back to a normal FAT formated SD card?
Just to clarify - I don't care for the data that might be on it... I just want the card back usable
Thanks
Recovering an "Adopted" SD Card?
The best solution for now would be to plug the sd card into a phone with android 6.0 so that the phone can read the card and then while setting it up,you can format the card as "normal "(the part where it asks you whether to use the card as in adaptive storage or for accessing files).
Sent from my iPhone using Tapatalk
Cruzy12100 said:
The best solution for now would be to plug the sd card into a phone with android 6.0 so that the phone can read the card and then while setting it up,you can format the card as "normal "(the part where it asks you whether to use the card as in adaptive storage or for accessing files).
Click to expand...
Click to collapse
When I try this, I get "Unsupported SanDisk SD card"
I'm then asked to select either Portable or Internal and then Erase & Format but neither work. They fail at 20% and the message "Unsupported SanDisk SD card" is shown again
I'm a bit stumped. I thought surely the encryption used on adopted cards was only to stop external reads. It seems in this case it's stopping me from writing to or formating the card
Running out of options
Hi ! I am new to XDA...
My HTC 10's - SD Card (Sandisk 200 GB) with Adoptable Storage is Corrupted - Help Need...
As i was browsing my phone, one fine day, I got a prompt on HTC 10, that my SD card was unmounted, it instructed me to remove and re-insert my SD card back again...I did as per the instruction, but my HTC 10 fail to recognize my SD card...
After several attempts (removing and putting back the SD Card) the same issue persisted...
So what i did was, I removed & re-installed the SD card when i was in the Settings Menu>Storage..As i was inserting the card it Phone tries to read and it displays SD Card is Corrupted...
Since my SD card is configured as Adoptable Storage (SD Card as Internal Storage) some of my apps are missing...also my photos, video and other files are also missing...
Please help me, how to go about recovering my SD card...the right way..
I have a PC with windows Vista,so i tried to connect the SD card with an SDHC Adapter to my PC via the On Board Card Reader..It did not recognize... I went in to My Computer>Right Click> Manage> Disk Management> It shows the SD as healthy partition's as 16 MB and 183 GB...Without any drive letter...I tried to right click and assign a drive letter, I am unable to assign a drive letter in the Disk Management Console...I assume if i am able to assign a drive letter, I will be able to Run Check Disk from a Command Line to Check for and fix Disk Errors and hopefully recover my SD card data...