Hi guys,
Can you do a quick test on your Pixel 3a for me please?
Everytime I try to record a video with light on, the device cut off the light very quickly. It's impossible for my Pixel 3a to record a video with light more than 2-10 minutes.
I thought it was normal, but.. I am worried because I try to do that just in standard video mode at 1080p/30fps (not even 60fps or 4K), and I tested on another device (Nokia 6.1 Android One) and it can record a 1080p video with flashlight with no limit, like forever...
So, can someone just test that for me please? Like just put the light on in camera, record a video and put the device on your desk face down and wait if the flashlight turn off? It's not a long test, it should turn off very quickly (if my device doesn't have a hardware issue...)
Thanks again guys! :good:
In my 3a XL in 4k 30fps after 2 min led turn off and message "warning device is to hot" or somehthing like that
Same result as bioly87 with me Pixel 3a shooting at 1080P. It'll shut the LED flash off with a heat warning.
So, good news for me. Not only my device.
But bad news for us... Why Google allows us to use the light if it turn off just after. When other phones can do it with no limit... It's weird.
Anyways thank you guys for doing the test.
Related
Hi,
My camera is very very slow. The quality seems good but when filming and moving the phone everything is very blurry. Is this normal / common issue?
If I take a picture of something it has to be absolutely still otherwise the picture is blurred.
When I direct it to a wall which is 1 color the camera if very fast, but when I move it to a colored area with lights etc, it flickers 1 time and then it goes very slow, as if some filter is applied in areas which are lighter.
I get this also and upgrading the radio has not solved the problem.
I've noticed that it seems to be fast in daylight?
Theres a camera trick in the forums - kaiser I think about switching off the phone (sleep mode by pressing the power button) whilst the camera is on and switching it back on again improving the speed but I have not been able to make it work.
The Polaris camera is very good in daylight conditions! If you try to take pictures in low light conditions the fps will drop so that it seems like it is very slow.
Try this little trick for videos or pictures in low light conditions with max fps:
1. Activate camera with camera button
2. Put your finger on the camera lens and hold it there
3. Turn of Screen / Put Polaris into sleep mode and wait 5 - 8 seconds
4. Activate Polaris screen again with power button
5. Now you can take pictures / videos with max fps!
But be aware of the fact, that with this little trick the iso lightening won't work anymore and the pictures will be darker and have lower quality!
After using the camera in better light conditions, everything will be as before the trick!
WOW! and that actually DID work
thanks for tip friend, I can live with the lower quality if I can get a decent video recording... The ones I've done before were rubbish. I would have been embarassed to show them to anyone... except maybe at a 60's convention..the blurryness was a little psychadelic!
The trick seems to work! Isn't there a way to modify the rom to always disable the light filter?
The other front camera is always working very fast, it's just the one on the back.
Thanks!
Maybe UDK might build it into his v9 release? (hint, hint!)
As far as i know there is no chance to tweak some software or a rom so that the problom won't occur again. When starting the camera it's hardware will always activate the iso lightning and therefore there will be those fps drops in low light conditions.
It has something to do with the lack of hardware drivers which could keep high fps rates also in low light conditions..... BUT i'm not sure because of the diamond!
If you compare it with the diamond, there ARE some video drivers but the performance of the camera is nearly the SAME as on Polaris.... in some situations even worse and less fps rates!
ZaPP187 said:
As far as i know there is no chance to tweak
If you compare it with the diamond, there ARE some video drivers but the performance of the camera is nearly the SAME as on Polaris.... in some situations even worse and less fps rates!
Click to expand...
Click to collapse
htc phone has the slow camera problem all the time ,and will last too its dieth
so change your htc for samung or nokia their cameras are better than htc
ZaPP187 said:
It has something to do with the lack of hardware drivers which could keep high fps rates also in low light conditions.....
Click to expand...
Click to collapse
It has absolutely nothing to do with drivers. The phone's night mode isn't simply adjusting the ISO. The phone is allowing more light into the sensor, thus keeping the shutter open longer. Doing so blurs the picture if you move around. Any phone with a night mode does the same thing. In fact any digitial camera with a nightmode will also do this.
ZaPP187 said:
The Polaris camera is very good in daylight conditions! If you try to take pictures in low light conditions the fps will drop so that it seems like it is very slow.
Try this little trick for videos or pictures in low light conditions with max fps:
1. Activate camera with camera button
2. Put your finger on the camera lens and hold it there
3. Turn of Screen / Put Polaris into sleep mode and wait 5 - 8 seconds
4. Activate Polaris screen again with power button
5. Now you can take pictures / videos with max fps!
But be aware of the fact, that with this little trick the iso lightening won't work anymore and the pictures will be darker and have lower quality!
After using the camera in better light conditions, everything will be as before the trick!
Click to expand...
Click to collapse
OMG, it works! thx a lot!
Can I ask how to modify this trick via a .reg file?
As said above, this cannot be done. You'll have to do it manually each time.
sonus said:
It has absolutely nothing to do with drivers. The phone's night mode isn't simply adjusting the ISO. The phone is allowing more light into the sensor, thus keeping the shutter open longer. Doing so blurs the picture if you move around. Any phone with a night mode does the same thing. In fact any digitial camera with a nightmode will also do this.
Click to expand...
Click to collapse
Ok, but how about setting a value for nightmode, so it wont be used in mediocre lit areas thus increasing performance?(maybe to finally allow to make some nice, steady pictures) I think HTC overdid it a little.
And how can you explain this trick, fooling phone that it's complete darkness, so it decides to turn nightmode off? Kinda weird.
Also what LightSensorHz(50) registry value does?
\HKLM\Software\Drivers\Camera\Property
I used to have a BB curve that also had a camera LED but it worked like a flash when I hit the button to take the picture the LED would automatically flash to take the pic..it's annoying that on my Fuze I have to manually turn on/off the led light..I was wondering if there's some software or a patch that will make the camera LED behave in this manner?
no. cannot.
it's trying to replace sun light with a match
a led is many times weaker then a real flash
which would temp blind you if it was on all the time
and you looked into it
where a led is more like whats your computer, tv, dvdplayer or the likes
got just a bit stronger but not more then 80 lumen
where a real flash can have about 5000 lumen
so sure one can program the led "flash" to turn on and close like a real
flash does but it would give no effect
euklid said:
I used to have a BB curve that also had a camera LED but it worked like a flash when I hit the button to take the picture the LED would automatically flash to take the pic..it's annoying that on my Fuze I have to manually turn on/off the led light..I was wondering if there's some software or a patch that will make the camera LED behave in this manner?
Click to expand...
Click to collapse
euklid, I am with you. My nokia use to do that. It is a horrible design and pain to have to turn the light on each time to use it. It is the same type of light set up in my nokia as on the fuze, just that nokia knew how to use it properly. It is funny with all the mods available for the Fuze, I would have thought that would have been the first thing somebody changed. And, I thought I was the only person this aggrevated the sh!t out of.....
Rudegar said:
it's trying to replace sun light with a match
a led is many times weaker then a real flash
which would temp blind you if it was on all the time
and you looked into it
where a led is more like whats your computer, tv, dvdplayer or the likes
got just a bit stronger but not more then 80 lumen
where a real flash can have about 5000 lumen
so sure one can program the led "flash" to turn on and close like a real
flash does but it would give no effect
Click to expand...
Click to collapse
I don't want it as bright as a real flash of course..but the Blackberry curve has an LED also and it works well as a "flash"..the brightness of the LED the Fuze has now when u take the picture is fine for most cases, I've tested taking a few pics in a dark room and they come out decent..my point is that why is there no auto setting..so the LED goes from OFF to its max brightness as soon as you press the button to take the picture and then shut off automatically after pic is taken..a feature that the BB curve and some other phones have..I wish someone would make a mod to the camera software to do this..couldn't you use the Fuze's light sensor to determine if a flash is needed or not..
I suppose it would be possible but don't really see how one could do it with the existing software without having the source-code people would have to trail and error using a sex editor
one thing is to use a hex editor to alter stuff already in the code but to add new stuff like tieing the led to the capture itself not sure how much work it would be to change the cam app sounds like a great deal
about using the light sensor then sure but could be misleading as
the light sensor is facing the opposite direction
Any news on this? Has anyone tried to write a patch or program? Any reg hacks? I'm desperate!
No use for it.
As said before by one of us....
A real camera have better sync when taking a shot and opening flash.
Think. Our phones have a delay that is not controlled and varies depending on the auto focus and light condition, that is why they set it to be on before taking the shot.
Maybe we will see a complete PPC from HTC soon, today already exist the technology to have more than 5 MP camera with a decent flash, maybe the TouchPro 3 will have it, that is why I will stick with my Fuze unless I have to forcefully buy a new device like the TP2 in order to deduct it from my Taxes. Lets see.
Hi:
Since it is not possible for the light to flash automatically, is there any way to set it to always on (while in camera mode of course), so it does not have to be turned on each time I use the camera (I pretty much use it while out with friends in the evening, so it's pretty much always dark)?
Thanks!
Problem with that.
cincy1020 said:
Hi:
Since it is not possible for the light to flash automatically, is there any way to set it to always on (while in camera mode of course), so it does not have to be turned on each time I use the camera (I pretty much use it while out with friends in the evening, so it's pretty much always dark)?
Thanks!
Click to expand...
Click to collapse
As far as I know.... the reason that is not set to always on is because you may damage the LED if you keep it on for a long time or X-period of time, but there is an application(hTorch) that lets you use the LED as a Flashlight, I already try to have both the camera and hTorch open at the same time and the camera failed to open. Any way when you use hTorch for too long the light start flickering.
udgn said:
As far as I know.... the reason that is not set to always on is because you may damage the LED if you keep it on for a long time or X-period of time, but there is an application(hTorch) that lets you use the LED as a Flashlight, I already try to have both the camera and hTorch open at the same time and the camera failed to open. Any way when you use hTorch for too long the light start flickering.
Click to expand...
Click to collapse
Oh, I think I did not explain myself correctly. I don't want the light ALWAYS on. And, I do use Htorch for when I need a flashlight. What I guess I should have said is in camera mode, there is a setting to turn on the light. Is there a way for this to be activated every time the camera is opened? Not as a flash per say, just as the default setting for the light?
Thanks!
Not sure if anyone notice but if you are taking videos in a dark room or at night there is what appears to be a dead pixel (green dot) just above the center of the phone. However this might be a software issue because I do not see this dead pixel while taking pictures in a dark room in camera mode. But in video mode especially when the settings is at full HD 1080p you can see it clearly. If you set video settings to 960 by 540 then it is less noticeable but still there. Since it doesn't show up on camera mode I believe it could be a software issue. Could someone else try testing to see if they are having this problem also or is it just me. Just go into a dark room or place your hands over the lens and switch to video mode and set it to full 1080p. When you record in the dark you should see the dead pixel during playback. If I'm the only one then I probably need to get a new phone.
It would be incredibly helpful if you could post one more thread in relation to this matter.
Thanks,
The Sarcasmista
Hello guys
When I use put 4k z3 degree temperature rise significantly, then the camera closes in compulsory
Just use the camera in 4K two minutes
In manual mode 10 minutes
In automatic mode and 10 minutes too
Do you have a solution to it?
No. Model is D6616
I'm sorry,,, I use google translation
Its a known thing, almost every reviewer also mentions it stopping at around ~10 mins due to overheating, so don't worry you did not get a defective unit.
Only solution right now, is if you live in a cold area it will take longer before it stops, but basically the answer is no.
Hi.
Since the first time I tried to make a slow-motion video, I notice that the camera can't capture enought light, like it's always in the dark, but the regular photo/video works great.
The next day instead, one time when I open the camera app a toast appeared: "unknown error" and the camera wasn't open; in the second attempt instead it worked normally, even the slow motion video.
But sometimes, the 480fps video are "laggy", and sometimes not.
I'm pretty sure, at this point, that is a software problem. I already tried to delete the app's data, but nothing changed. Anyone have this problem too?
All high speed cameras ever made, especially stupid high framerate ones like 1000FPS+ (just gets worse the faster they get) needs bright light. You're not going to be shooting high framerate video on any device in dim lighting situations any time soon unfortunately.
Maybe turn on the improvement program data sharing if you want help with the errors, that would most likely be something the phone sends info to Oneplus about.
Already enabled. The bright problem in the slow-motion wasn't the low light itself, because I tried outdoor in the day, full of light. This disappeared after a while, but I can't replicate anymore. Have no idea.