Disclaimer :
Code:
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
This is based on Xiaomi Open Source Kernel Code.
Very close to stock kernel with minimal changes, more features will be added soon.
Features :
GPU Additional Frequencies - 675MHz
Adrenoboost
USB Force Fast Charge (Disabled by default)
LZ4 Compression
FS fsync toggle on/off
Nap Low Power State Enabled For Adreno 640
Maple IO Scheduler
SLIMbus OC
Min brightness option
GPU Idle Timeout 64s
SafetyNet Passed
Pre-rooted with Magisk
And many more improvements, check commits!
Download [PIE] : Releases
Download [Q] : AFH
Youtube [Benchmark] :
Youtube [F2FS] :
Changelog :
v2 : #38
v2.1 : #48
v2.2 : #90
v2.3 : #150
v2.4 : #150
v3 : #250
EOL : #443
Credits :
nathanchance
franciscofranco
kdrag0n
flar2
Special thanks to mslezak for his help, checkout his thread located here.
Donations :
If you like my work, buy me a coffee!
Donators :
Mohdan99
ciaox
Benchmarks and FAQs on Post #2
Telegram for kernel related discussion and test versions : QuaxKernel
Regards,
acervenky
XDA:DevDB Information
Quax, Kernel for the Redmi K20 Pro
Contributors
acervenky
Source Code [PIE] : [url]https://github.com/acervenky/raphaelquax/[/URL]
Source Code [Q] : [url]https://github.com/acervenky/quax_raphael-q/[/URL]
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 2.3
Beta Release Date: 2019-09-15
Created 2019-08-25
Last Updated 2019-09-15
Steps To Convert Cache & Data To F2FS :
Flash TWRP with F2FS Support
Flash latest Quax release
Flash raphael_patch (attached on v2.4 git)
Convert cache to F2FS by selecting Wipe->Advanced Wipe->Select Cache->Repair Or Change File System->Change File System->F2FS
Repeat the same process on data partition
Factory Reset
Reboot
FAQs :
Q. How to install the kernel?
A. Flash on stock kernel using TWRP, Wipe Cache & Reboot [Do not dirty flash on any other custom kernel]
Q. How to roll back to stock kernel?
A. Backup your kernel before flashing this, if you feel like going back to stock, just restore it via TWRP.
Q. I'm having bootloop, what should I do?
A. You will face some bootloops on first installation, it'll boot in some time.
Q. Do I need to flash Magisk after flashing this kernel?
A. No, this kernel is already patched with magisk.
Q. How to use profiles?
A. Download the profiles, and import them on Smartpack Kernel Manager. To apply tap on profile name and apply!
Regards,
acervenky
Reserved 1
How to install
---------- Post added at 04:17 PM ---------- Previous post was at 04:16 PM ----------
and how to remove it if an error occurs
Hope there will be more custom kernel that unleash redmi k20 pro maximum performance
Does it harm my machine after installing it ??
congtheson said:
How to install
---------- Post added at 04:17 PM ---------- Previous post was at 04:16 PM ----------
and how to remove it if an error occurs
Click to expand...
Click to collapse
Backup your boot partition and then flash this via TWRP.
congtheson said:
Does it harm my machine after installing it ??
Click to expand...
Click to collapse
No.
feyzna said:
Hope there will be more custom kernel that unleash redmi k20 pro maximum performance
Click to expand...
Click to collapse
Yes, hope so
Regards,
acervenky
can you guide me to install in twrp with img file
can you guide me to install in twrp with img file
acervenky said:
Q. How to roll back to stock kernel?
A. Backup your kernel before flashing this, if you feel like going back to stock, just restore it via TWRP.
Click to expand...
Click to collapse
dirty flash current ROM from above?
alex9yust said:
dirty flash current ROM from above?
Click to expand...
Click to collapse
This is a kernel, not a rom!
Regards,
acervenky
acervenky said:
This is a kernel, not a rom!
Click to expand...
Click to collapse
yeah, I know. then you will add different features, init.something.rc will appear that will be put in the system and that will remain when the boot.img backup is restored.
congtheson said:
can you guide me to install in twrp with img file
Click to expand...
Click to collapse
Boot in TWRP > Install > Install Image > Select the download kernel image > Select Boot > Flash
Regards,
acervenky
I can't use or access the wifi network when using this kernel so I recovered it
acervenky said:
Boot in TWRP > Install > Install Image > Select the download kernel image > Select Boot > Flash
Regards,
acervenky
Click to expand...
Click to collapse
I can't use or access the wifi network when using this kernel so I recovered it
congtheson said:
I can't use or access the wifi network when using this kernel so I recovered it
Click to expand...
Click to collapse
Which rom are you using?
Regards,
acervenky
I use miroom 9.8.1
acervenky said:
Which rom are you using?
Regards,
acervenky
Click to expand...
Click to collapse
I use miroom 9.8.1
Pls fix it
I tried in 10.3.17 mi-globe rom, first booted perfectly, after the next boot become bootloop. It always restarted before the UI loaded. Only the restored original backup boot.img helped.
Vis77 said:
I tried in 10.3.17 mi-globe rom, first booted perfectly, after the next boot become bootloop. It always restarted before the UI loaded. Only the restored original backup boot.img helped.
Click to expand...
Click to collapse
It can bootloop for a couple of times before booting into system!
This was compiled in AIK using Raphaelin stock kernel as a base, working on getting Anykernel working ASAP.
Regards,
acervenky
Is there any way to fix wifi error ??
acervenky said:
This was compiled in AIK using Raphaelin stock kernel as a base, working on getting Anykernel working ASAP.
Regards,
acervenky
Click to expand...
Click to collapse
Is there any way to fix wifi error ??
acervenky said:
It can bootloop for a couple of times before booting into system.
Click to expand...
Click to collapse
Thx, later i try it again
Will there be additional features such as wakelock blocker, f2fs down the line? It be nice to see the optimization from arter kernel. I plan to get a 9T Pro in the future.
Related
Hi.! welcome to Suemax kernel thread for marshmallow update
Supported Device N910C/H/U
Change log :
Pure Basic v3.2 TEST Release
1.) Added Fake Enforce option (Magisk only)
2.) SaftyNet workaround and Bypass (Magisk only)
3.) Hide- red seandroid enforcing at boot (ONLY for SuperSU systemless)
Pure Basic v3.1 Last Release
1. Updated Linux Patch to 3.10.105
2. Updated Ramdisks to latest verions
Pure Basic v3.0 Previous
1. SM-N910C_SEA_MM_Opensource_N910CXXS2DPK7
2. Linux version Patched to 3.10.104
3. Updated ramdisks to N910CXXS2DPL8 & N910UXXS2DPL1
4. I/O Schedulers: sio,sioplus,tripndroid,Vr & zen
5. Added UX (Note7) + Stock firmware Support
6. Added CPU
+ALUCARD:
+BIOSHOCK
+INTEREXTREM
+LIONHEART
+CONSERVATIVEX
+IMPULSE
-(Ondemand + Conservative Disabled)
NOTE : Rest of changes Same as v2.0
v.2.0 (new)
1. Fixed private mode (Un-tested)
2. ADB insecure (now work with Android 6)
3. Updated ramdisk script
v1.0b
Has same change log but only compiled at my work station with initial Changes :angel:
v1.0
CPU
a. ) Enabled Ondemand & Conservative governor
b. ) Added Bio-shock governor
c. ) Added Lionheart governor
d. ) Added INTEREXTRE governor
Other Cpu tweaks
a. ) Added Freq relationship C ( For more power saving )
b. ) Tweaked Interactive Cpu governor & More
File-System support
a. ) NTFS
b. ) F2FS
c. ) CIFS
Other Miscellaneous Supported drivers
a. ) MS XPAD game controller support
b. ) ISO & UDF CDROM support
Miscellaneous Support for System
a. ) CLEANCACHE & ZCACHE
Network TCP Ipv4
a. ) enable all TCP Congestion Algorithm in-built - Westwood+ default
SELUNIX : Permissive
Ramdisk-changes
a. ) Added auto-Busybox install (If not there in system xbin)
b. ) Added init.d script (Automatic enable if not in rom )
c. ) Added other tweaks for wifi password save on reboot , Screen Mirror fix and disabled security Tima and Knox
Note : Use kernel Adiutor to control kernel and setting Playstore
Read this F.A.Q
1. Kindly do not ask ETAs & Special requests if asked will be just ignored .
2. Reporting Bugs : Kindly detail your issue with Device(model) Firmware (Stock or custom rom Name) and with possible Logs e.g valid Logcat
3. Kindly Stay on kernel thread topic.!
Version Information
Status: Stable (No Snaypse support)
Current STABLE: v3.0
Android: 6.0.1 (N910CXXU2DPCB)
Kernel Source : https://github.com/djmax81/Suemax-kernel_Exynos5433_BASIC_MM
New
Pure Basic Kernel Source : https://github.com/djmax81/Suemax-kernel_Exynos5433_MM_Plus
Download :
v3.2
Download Pure Basic v3.2-N910C/H
N910U - SOON
v3.1
Download Pure Basic v3.1-N910C/H
Download Pure Basic v3.1-N910U
v3.0
Download Pure Basic v3.0-N910C/H
Download Pure Basic v3.0-N910U
Download Mirror (Android file host Mirror) Thanx @dicksteele
MIUI Support for N910C/H/U (Pure Basic )
v3.1
Download MiUi Pure Basic v3.1-N910C/H
Download MiUi Pure Basic v3.1-N910U
v3.0
Download MiUi Pure Basic v3.0-N910C/H
Download MiUi Pure Basic v3.0-N910U
v2.0
Download v2.0-N910C/H
Download v2.0-N910C/H (Android file host Mirror) Thanx @dicksteele
Download v2.0-N910U
v.1.0b
Download v1.0b-N910C/H
Updated to latest N910UXXU2DPC2 ramdisk
Download v1.0b-N910U
Link N910U Noise fix by not-i : http://forum.xda-developers.com/show....php?t=3228398
SCREENSHOT from v3.2
Reserved
Reserved
Great news. Thank you my friend!
thanks
Goodies coming
Sent from my SM-N910C using XDA Free mobile app
Nice I will test it when get MM update
Thank U!
beefx said:
Nice I will test it when get MM update
Thank U!
Click to expand...
Click to collapse
Thanx and do not forget to bug report if any and I will update thread with detail change log sooon.!!!!! :angel:
just flash via recovery. right ?? i am on mm poland...and i have root and twrp 3.0.2.0
Delfinster said:
just flash via recovery. right ?? i am on mm poland...and i have root and twrp 3.0.2.0
Click to expand...
Click to collapse
Yes .! Flash zip via any custom recovery :good:
djmax81 said:
Yes .! Flash zip via any custom recovery :good:
Click to expand...
Click to collapse
just flashed...everthing is fine for now ,,, i just lost all my wifi passwords but not that big deal
Delfinster said:
just flashed...everthing is fine for now ,,, i just lost all my wifi passwords but not that big deal
Click to expand...
Click to collapse
Reboot device again and Password will be back .!!! + do not forget to flash superSU .zip on top of kernel
That was fast :good:
djmax81 said:
Reboot device again and Password will be back .!!! + do not forget to flash superSU .zip on top of kernel
Click to expand...
Click to collapse
lol..i just see that superSu not working :d i will flash right now thanks for that info
agentdeep said:
That was fast :good:
Click to expand...
Click to collapse
Hahaha.! Yup and you know what Gonna be fast my Next Snaypse supported Version Update :angel:
Delfinster said:
lol..i just see that superSu not working :d i will flash right now thanks for that info
Click to expand...
Click to collapse
Yes .! With new superSU v2.7.1 + Its recommended to Re-Flash SuperSU .zip after any kernel update coz Now on SuperSU do changes to kernel Ramdisk
djmax81 said:
Hahaha.! Yup and you know what Gonna be fast my Next Snaypse supported Version Update :angel:
Click to expand...
Click to collapse
Will flash this and observe for few days :highfive:
Now is all okey and fine ....now testing kernel for couple of days..becose on mm battery is not that good
Downloaded and flashed. Works fine! Only thing, that microsd nightmare still exists, same as on stock kernel. I wonder why TitaniumBackup and many other apps fail to get write write access even with root permission
Sapphire999 said:
Downloaded and flashed. Works fine! Only thing, that microsd nightmare still exists, same as on stock kernel. I wonder why TitaniumBackup and many other apps fail to get write write access even with root permission
Click to expand...
Click to collapse
its know firmware related issue on Stock roms.
you need to add this line to platform.xml
<group gid="sdcard_rw" />
via root Explorer dir System>etc>permission>platform.xml (With text editor)
Reboot device after
But if you got issue with presses then upload platform.xml (i'll edit it for you and all you need to do set permission and reboot or ican make flashable zip)
cheers
Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, Meticulus
Source Code: https://github.com/hak86/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-02-09
Created 2018-02-09
Last Updated 2018-02-08
ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.
Thank you for your awesome work! AOSPA is my fking favorite ROM.
NetfariousIntent said:
Thank you for your awesome work! AOSPA is my fking favorite ROM.
Click to expand...
Click to collapse
glad to hear that
I'll post in p9 lite and honor 6x sections later
here a screenshot of my friend that run on his p10lite and have almost 19%..
it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all
karasoulas said:
it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all
Click to expand...
Click to collapse
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
haky 86 said:
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
Click to expand...
Click to collapse
yup. works. i dont know why man. but the stock rom is faaaaar faster than ur roms. Not trying to be rude i love ur work but i dont know. maybe iim doing something wrong?
** Note **
**11/02/2018**
pa_hi6250-7.3.1-EOL-20180210.zip
Changelogs:
**11/02/2018**
possible fix for ril crashes
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/
atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
NetfariousIntent said:
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/
Click to expand...
Click to collapse
I use pico, always.
Sim keep disconnecting itself
It gives error while saving the finger print, both in this and the slim rom
atsmurat said:
It gives error while saving the finger print, both in this and the slim rom
Click to expand...
Click to collapse
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back
CarlosAG10 said:
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back
Click to expand...
Click to collapse
İ didnt erase fingerprints in Omni ROM . From that ?
Where is Elite Rom ?
haky 86 said:
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
I use pico, always.
Click to expand...
Click to collapse
Noto solve the SIM from disconnecting itself
Wire1122 said:
Noto solve the SIM from disconnecting itself
Click to expand...
Click to collapse
I will do a test-build post dinner, I fix the problems around here a few weeks ago on some roms!
Have You found the bug? I really want use your rom for Daily use.
** Note **
**13/02/2018**
pa_hi6250-7.3.1-EOL-20180213.zip
**13/02/2018**
Fix RIL crashes.
How to fix RIL Crashes?
Follow this post
Introduction
This is an unofficial build of LineageOS 16 for Redmi Note 7 Pro. Differences from the one provided by Dyneteve include:
- Ported the CAF wrappedkey encryption stuff, which is what MIUI uses, over using patches from https://mokeedev.review/q/topic:%22fbe-wrapped-key%22+(statuspen%20OR%20status:merged), This requires an recovery with wrappedkey decryption support, e.g. this one
- Applied unmerged patch https://review.lineageos.org/c/LineageOS/android_build/+/247066 to mount system as /system_root properly on install. This makes addon.d scripts (e.g. Magisk / GApps survival script) work again on our device. This requires an recovery with proper system_as_root support, e.g. this one
- ROM includes its own vendor image instead of relying on one provided by MIUI. I intend to try to build as much of vendor image as possible from CAF source in the future.
Flash instructions
- Make sure you have the latest firmware images. If not, update them before flashing.
- Flash a TWRP recovery that supports mounting system as /system_root and supports wrappedkey encryption (the one provided above)
- Wipe data partition (without wiping /data/media). If you came from another non-CAF ROM (ROM that do not support wrappedkey mode) and had encryption enabled, you will need to format your data partition (including /data/media).
Note: If you decide to format your data partition, always format with 'advanced wipe' in TWRP recovery. DO NOT use fastboot -w or fastboot erase, even if you do, please format again in recovery, otherwise the system might not work.
- Install the zip in TWRP.
- Install whatever you want e.g. Magisk, OpenGapps
- DO NOT install the fcrypt disabler.
- Reboot and enjoy
Known issues
DO NOT remove screen lock passwords if you set one. You can change the password just fine, but DO NOT REMOVE IT. YOU WILL LOSE ACCESS TO ALL DATA IF YOU DO THIS AND REBOOT.
Removing screen lock passwords work after 20190528-1.
Downloads
20190609-1: https://mega.nz/#!PdRnxIia!Boh-a8e5JHt8YEBwbXKt8rWYj3PC56mdpEIXwDEY2ng
changelog: 1) Merged upstream LineageOS (June security patch) 2) Updated kernel to 4.14.123 3) Updated MIUI binary blobs 4) Some clean-up
NOTE: /proc/last_kmsg support is removed due to incompatibility. This feature is replaced by pstore, which you could find more information on through some Google-fu.
History versions:
20190528-1: https://mega.nz/#!nZRTQCbS!qf-RdT-ijayg8UBxyyz3Hoi2O_8ZtpWewgNv-eVDcqA
changelog: 1) merged upstream LineageOS; 2) fixed the bug of removing screen lock passwords, now it won't swallow all your data (this commit: https://github.com/PeterCxy/android...mmit/d2fe3434cddb98eeb414906e71a817559ade1b26; 3) merged LTS kernel 4.14.122, thanks to YaroST and aviraxp; 4) fixed potential charging problem; 5) some other kernel improvements
20190526-1: https://mega.nz/#!rRgwmY5T!2fQyDjukLoGmk7KRtas5n2Y_it9QS_s2noAItzNvFfY
Sources
Device: https://github.com/PeterCxy/android_device_xiaomi_violet
Kernel: https://github.com/PeterCxy/android_kernel_xiaomi_sm6150
Other changes and patches: see what is available on my GitHub https://github.com/PeterCxy/, everything is open-source for this ROM.
Contributors
PeterCxy, GuaiYiHu, aviraxp
Source Code: https://github.com/PeterCxy/android_device_xiaomi_violet
Thanks ?
Thank you for the ROM!
There's a Typo in the ROM os version description.
cant boot. installed as mentioned in instruction. its automatically rebooting to recovery (twrp, the given one). now whenever i try to flash other rrecovery its not booting into. stuck. please help.
jyoti.id said:
cant boot. installed as mentioned in instruction. its automatically rebooting to recovery (twrp, the given one). now whenever i try to flash other rrecovery its not booting into. stuck. please help.
Click to expand...
Click to collapse
If you can't boot to recovery at all you may need to flash a fastboot ROM of MIUI (of course in fastboot mode) and try to install twrp again.
jyoti.id said:
cant boot. installed as mentioned in instruction. its automatically rebooting to recovery (twrp, the given one). now whenever i try to flash other rrecovery its not booting into. stuck. please help.
Click to expand...
Click to collapse
Sorry I have no idea here.. What ROM you were on before flashing this?
Dwughjsd said:
If you can't boot to recovery at all you may need to flash a fastboot ROM of MIUI (of course in fastboot mode) and try to install twrp again.
Click to expand...
Click to collapse
iv flashed the stock rom, but now the internal storage is showing only 16GB of storage.
Edit: fixed everything. Thank you. I was curious about the battery backup of this ROM badly, so I just rushed in things so maybe I made some mistakes.
jyoti.id said:
iv flashed the stock rom, but now the internal storage is showing only 16GB of storage.
Edit: fixed everything. Thank you. I was curious about the battery backup of this ROM badly, so I just rushed in things so maybe I made some mistakes.
Click to expand...
Click to collapse
Just keep in mind that safety first
Download link not working
Edit: UC browser was the culprit
dwughjsd said:
just keep in mind that safety first
Click to expand...
Click to collapse
how u fixed storage issue
gsunil said:
how u fixed storage issue
Click to expand...
Click to collapse
It was @jyoti.id that faced and solved the issue, so let's call him for an answer
rom keeps rebooting into twrp , i did every step
gsunil said:
how u fixed storage issue
Click to expand...
Click to collapse
I just flashed the whole fastboot rom again & it fixed everything.
---------- Post added at 04:34 AM ---------- Previous post was at 04:33 AM ----------
King_Dinoco10 said:
rom keeps rebooting into twrp , i did every step
Click to expand...
Click to collapse
Same thing happened with me too
Device not charging above 86%. Anyone else facing this bug ?
PeterCxy said:
Sorry I have no idea here.. What ROM you were on before flashing this?
Click to expand...
Click to collapse
The phone does not charge more than 91%!
lapo_chel said:
The phone does not charge more than 91%!
Click to expand...
Click to collapse
now should be fixed, try today's new build
PeterCxy said:
now should be fixed, try today's new build
Click to expand...
Click to collapse
Safetynet does not pass.
lapo_chel said:
Safetynet does not pass.
Click to expand...
Click to collapse
It's because I used vendor files from MIUI beta. You can bypass it with a magisk module to reset the build fingerprint
Many thanks for your build! I like it much.
IMHO, SELinux should be enabled.
This kernel have tested for g3311,and g3312/13 need to test
And it just for offical rom currently
Kernel Features:
[*]Based 43.0.A.7.55 official sources
[*]bootimg based 43.0.A.7.99_hk
[*]bootimg with magisk
[*]disbaled verity
[*]update to 3.18.36
[*]Added Ultra KSM
[*]KSM config have adjusted in bootimg
[*]OTG(just test)
[*]enable mtk dymamic
[*]F2FS supported
[*]Compiled with linaro 6.3 and enabled optimized flag
[*]CPU Governous(bioshock,thunderx,smartass,smartmax and more and more)(thunderx is default)(some gov is just test)
[*]I/O Scheduler(vr,sioplus and more,bfq is default)
[*]Added ThunderQuake Engine
[*]Added thunderchage and fastcharge(just test)
[*]Added frandom
[*]TCP:westwood is default
[*]Some Changes to improve performace
[*]Gpu midgard drivers update to r20p0
[*]Added Wireguard
[*]Added zswap
[*]Cpu overclock to 1556 and minimum 221
[*]Gpu overclock to 650 and added lower volt
[*]and more need you to explore
------------------------------------
Change Log
2020/3/6
[*]Fix fstab only f2fs error
------------------------------------
Contributor: rote66
Download link: kernel link
Kernel Source:: https://github.com/rote66/android_kernel_sony_pine
------------------------------------
To flash it:
1.backup your boot.img in your external_sd
2.flash twrp to boot
3.flash this kernel and reboot
About Change to f2fs
you need this TWRP
fixed MTP and support f2fs
TWRP link: TWRP link
Credits:
All developers for mediatek and in my commit
Version Information
Status: Stable(perhaps)
Current Stable Version: v1.5
Kernel Version: 3.18.x
Stable Release Date: 03-02-2020
I'm onstall that on my G3312 with last ROM and he stuck in bootloop
maximon8613777 said:
I'm onstall that on my G3312 with last ROM and he stuck in bootloop
Click to expand...
Click to collapse
Have fixed a fstab error,you can try it again
rote66 said:
Have fixed a fstab error,you can try it again
Click to expand...
Click to collapse
Yep, all is work. I be test that before stable LOS 14
maximon8613777 said:
Yep, all is work. I be test that before stable LOS 14
Click to expand...
Click to collapse
Los14.1 can be suited,just replace kernel manually.
rote66 said:
Los14.1 can be suited,just replace kernel manually.
Click to expand...
Click to collapse
Yes, but RIL on LOS has not working -> it makes no sense for me because i using L1 on the main
maximon8613777 said:
Yes, but RIL on LOS has not working -> it makes no sense for me because i using L1 on the main
Click to expand...
Click to collapse
ril and camera are hard working
decryptions and passwords?
Hi!!!
This will be the very first post of an utter noob
Namely, why upon installing the TWRP3.3.1-0_G3311_fix_rote66.img the phone cnstantly reboots into recovery and does not allow to make any changes without first providing a PASSWORD to decrypt DATA?
Am I doing something wrong? I can't flash the kernel, I can't in fact do anything...
noizzette said:
Hi!!!
This will be the very first post of an utter noob
Namely, why upon installing the TWRP3.3.1-0_G3311_fix_rote66.img the phone cnstantly reboots into recovery and does not allow to make any changes without first providing a PASSWORD to decrypt DATA?
Am I doing something wrong? I can't flash the kernel, I can't in fact do anything...
Click to expand...
Click to collapse
Your data is encrypted?Sorry i have not test the data with encryption.It seems the TWRP's decryption not Working. MayBe you can decrypt your data with formatting data.Or test the other twrp in fourms.
rote66 said:
Your data is encrypted?Sorry i have not test the data with encryption.It seems the TWRP's decryption not Working. MayBe you can decrypt your data with formatting data.Or test the other twrp in fourms.
Click to expand...
Click to collapse
Hi, no other TWRP in forums works and I have put all of them to test, really. No other boot.img works. Not even the one obtained through Magisk. Nothing. It never boots. I tried formatting data too. To no avail, though. It never completes the process.
The bootloader IS unlocked, the very model CAN have custom ROMs flashed to it. The problem must be elsewhere.
noizzette said:
Hi, no other TWRP in forums works and I have put all of them to test, really. No other boot.img works. Not even the one obtained through Magisk. Nothing. It never boots. I tried formatting data too. To no avail, though. It never completes the process.
The bootloader IS unlocked, the very model CAN have custom ROMs flashed to it. The problem must be elsewhere.
Click to expand...
Click to collapse
I think you need formatting data (format not wipe) then flash a non force-encrypt boot (like flash this kernel,it include boot.img)
Introducing N.E.O.L.I.T. Kernel for Realme C3/Narzo 10A. I have tried to optimize it to unleash the best performance it can deliver. Note that the kernel only works in custom roms which already had source-built kernels.
Some Features:
- Always upstreamed to the latest kernel tag
- Compiled using Clang 13
- Enabled faster charging
- Double tap to wake and FPS Meter support added for custom roms
- Disabled Oppo Memory Monitor
- Avoid dynamic memory allocation for kernfs and selinux
- Optimized for lower latency
- Memory Management improvements
- Fix cpufreq times memory leaks
- Disable MTK Memory logger
- Disable binder debug logspam
- Unselect systracker and debug latch by default
- Disable more MTK debugging
- Disable Oppo **** debugging
- Disable Oppo Charger spams
- Enabled Oppo macros
- Disable MTK thermal debugging
- Disable teei trustzone logging
- and more
Download: Sourceforge
Kernel source: Github
Credits:-
- Special thanks to Imran sir and lordwitcher for fixing the entire kernel
- Thanks to Maanush for helping with some conflicts
- Thanks to SparXfusion, Techyminati, Elias, kardebayan, Gagan Malvi and Vaisakh Murali for all the commits and suggestions
Reserved
Is this kernel better than default kernel of pixel rom, can It give better battery life and performance???
Khushwant Nerkar said:
Is this kernel better than default kernel of pixel rom, can It give better battery life and performance???
Click to expand...
Click to collapse
yep its much better and optimized
Hello!
Dear author, I want to ask you to remake the kernel for rmx2021 a little, if it's not difficult for you. The main thing that needs to be fixed is the camera (only the third camera works, which shoots black and white), a flashlight and fixed small lags.I would be very grateful if you do this.
Thank you for the attention.
sarthakroy2002 said:
yep its much better and optimized
Click to expand...
Click to collapse
How to return to regular pixelplus UI stock kernel please???
4live2kill said:
How to return to regular pixelplus UI stock kernel please???
Click to expand...
Click to collapse
flash boot img inside the zip
sarthakroy2002 said:
flash boot img inside the zip
Click to expand...
Click to collapse
Through recovery or fastboot?
4live2kill said:
Through recovery or fastboot?
Click to expand...
Click to collapse
Recovery, flash as boot.
Bhai stock rom ke sath is kernel ko flash Kar sakte hae kya
It's good
what happen if i flash it on stock rom?
i flashed this in corvus os and it encrypted my entire internal storage and wouldn't boot
craftplayeri2 said:
i flashed this in corvus os and it encrypted my entire internal storage and wouldn't boot
Click to expand...
Click to collapse
brother, you need to install the recovery update and that didn't work, then maybe use some other ROM or just use Android 11 ROM
Spuffyffet said:
brother, you need to install the recovery update and that didn't work, then maybe use some other ROM or just use Android 11 ROM
Click to expand...
Click to collapse
I had to flash stock firmware through sp flash tool, i couldn't even access the recovery anymore it was just stuck in fastboot
craftplayeri2 said:
I had to flash stock firmware through sp flash tool, i couldn't even access the recovery anymore it was just stuck in fastboot
Click to expand...
Click to collapse
yup exactly but I am saying use the updated recovery from the next time or just don't use AOSP based ROMs as some of them has a encrypting issue and this can also happen when you change the kernel.
can you flash it with arrow OS?
ItsMeJM said:
can you flash it with arrow OS?
Click to expand...
Click to collapse
You can, it's just a kernel brother
it's sad because since the update N.E.O.L.I.T-V7-QiQi no more versions have been added.
can it be used for evolution x? I tried flashing the kernel on Rom Evolution x 5.5.2 but it returned to recovery and a bootloop occurred on Realme C3