Database Info

[TWRP][OFFICIAL] TWRP 3.3.0-0 for OUKITEL WP1 [MT6763]

This TWRP Recovery Is Compiled From Source & Officially Supported
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Page: https://twrp.me/oukitel/oukitelkwp1.html
Unofficial GitHub Release : Here (release name : TWRP-OUKITEL-WP1)
Version Information
ROM OS Version: 8.1 Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel

[TWRP][OFFICIAL] TWRP 3.3.0-0 for UMIDIGI F1 Play [MT6771]

This TWRP Recovery Is Compiled From Source & Officially Supported
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Page: https://twrp.me/oukitel/umidigif1playhtml
Unofficial GitHub Release : Here (release name : TWRP-OUKITEL-WP1)
Version Information
ROM OS Version: 8.1 Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel

Does anyone knows if this can be installed on the "normal" F1 (not the F1 Play)?

If I unpack this and swap kernel for the F1 can I post it in F1 thread to share. Or can the f1 be added as a build branch?
EDIT:
Well it boots, but does not have working MTP.
the one i have been using already(a ported one) has working MTP, I will stay with it.

chankruze said:
This TWRP Recovery Is Compiled From Source & Officially Supported
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Page: https://twrp.me/oukitel/umidigif1playhtml
Unofficial GitHub Release : Here (release name : TWRP-OUKITEL-WP1)
Version Information
ROM OS Version: 8.1 Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel
Click to expand...
Click to collapse
for UMIDIGI F1 will it ?

Is the BL unlockable with just the old fasboot bl unlock commands? It's a little hard to find info on this thing. Must not be very popular yet.

Does this work on Android 9.0

#Starlord37# said:
Does this work on Android 9.0
Click to expand...
Click to collapse
This is for F1 play (which is 9.0 out of the box)

BZ0RG said:
This is for F1 play (which is 9.0 out of the box)
Click to expand...
Click to collapse
Ok I was wondering because it said android 8.1

@Starlord37 The last official release works well too (available at twrp website)

Just owned my F1 play.
Soon I will make my rom for it
Gesendet von meinem F1 mit Tapatalk

[RECOVERY][OFFICIAL] TWRP 3.3.x for Ulefone Armor 6

This TWRP recovery Is compiled from source & will be supported officially soon
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this project
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. Not tested yet
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery image and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then use your device key combo to boot into TWRP recovery mode.
Enjoy !
Downloads
Android File Host: https://www.androidfilehost.com/?w=files&flid=296748
Official TWRP Page: Yet to submit
Contributors
chankruze
Source Code: https://github.com/N00bTree/android_device_ulefone_Armor_6
Version Information
Status: stable

Thank you! I can confirm this also works on the Armor 6E.

i have been able to flash it but its pretty useless as i cant decrypt it and no other options show up

mentalik said:
i have been able to flash it but its pretty useless as i cant decrypt it and no other options show up
Click to expand...
Click to collapse
I had same problem, I flashed https://androidfilehost.com/?fid=6006931924117895653 and formatted internal data.

thanks that solved it for me

jonezy82 said:
I had same problem, I flashed https androidfilehost.com ?fid=6006931924117895653 and formatted internal data.
Click to expand...
Click to collapse
How do i even flash that? twrp is refusing to let me do anything.

Yoosk said:
How do i even flash that? twrp is refusing to let me do anything.
Click to expand...
Click to collapse
EDIT: Have you tried to select "cancel" when you get into twrp?
You can get past of decryption by selecting "cancel".
You need to format your internal storage, then flash that .zip from usb-otg usbstick.
FYI: I got my phone screwed once, I just flashed stock firmware with sp_flash_tool and it formatted storage for me.

[RECOVERY] TWRP 3.3.x for Realme U1

This TWRP Recovery Is Compiled From Source & Wii Be Suupported Officially
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off, after that use your device key combo to boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Page: coming soon !
Unofficial Release : https://www.androidfilehost.com/?w=files&flid=298136
Version Information
ROM OS Version: 8.1 Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel

[RECOVERY][3.3.1-20][tulip]Official/Unofficial TWRP for Xiaomi Redmi Note 6 Pro

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption Works
- Backup works
- Wipes Work
- Android 10 support
Download:
TWRP 3.3.1-20 Unofficial by mauronofrio
Official Builds
To Flash the TWRP:
Code:
fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Then reboot in TWRP manually.
Source code:
https://github.com/mauronofrio/android_bootable_recovery
https://github.com/TeamWin/android_device_xiaomi_tulip
Donations:
Credits:
Thanks to @DD3Boh for the testing and to @DarthJabba9 for the help with FDE and for the support
Created 2019-08-25

Actually only this unofficial TWRP is able to decrypt, soon also the Official TWRP will be able to Decrypt.

does official recovery supports F2FS ?

After install this recovery my data Partition is crashed after the decription. Nothing helps and i had install all new and Format my data....

TWRP disappears after reboot
My Note 6 Pro is unlocked. I enabled USB debugging.
I used "fastboot flash recovery" to flash the TWRP image over. No errors. But upon reboot, it goes back to the "Fast Boot" splash screen with a cartoon.
To get into TWRP, I have to "fastboot boot twrp.img".
I read that to troubleshoot, run "fastboot getvars anti", and the output is "4".
Any ideas?
Edit: I realized I have to press Volume Up to get into TWRP, instead of Volume Down. It's OK now.