UNBRICKING my Le Eco S3 x 626 but ADB and Fastboot not appearing in Device Manager - Android Software/Hacking General [Developers Only]

Hi, guys. My x626 phone suddenly bricked when I forgot to charge it the night before, 4 days ago. I've gone through hellish methods of unbricking my phone and finally was able to flash the stock ROM but with Chinese bloatwares. I tried to flash TWRP (so I can flash a custom MultiLang x626 ROM after) unto the new stock ROM but it just made me go back to square one; my phone is bricked again (I can't get past the Chinese boot logo) but this time the device manager can't detect my phone on fastboot mode. I can't even boot to recovery mode so I'm out of options
Can anybody help me?

Related

How to unbrick huawei scl u31

Hey guys ? yesterday i rooted my huawei y6 scl u31(android 5.1.1,emui 3.1 with qualcomm snapdragon 210 processor ) with kingroot and replaced it wits super sume. then i rebooted my phone but it stucked on huawei logo. i immediately wiped factory reset and wiped catche partition and rebooted but it doesn't work. my 3 biggest mistakes are
1. I havn't insalled any custom recovery.
2. I havn't enabled usb debugging.
3. I havn't unlocked bootloader.
now my phone is in bootloop(stuck on logo). stock recovery is working fine. so how to unbrick it ?
I *was* have the same problem the only sulotion
Is go to a shop to format it I didn't know how so I went to a shop to fix
http://consumer.huawei.com/et-en/support/downloads/detail/index.htm?id=87771 download stock rom from the official site, then put it on an sdcard and use stock recovery to flash OR, if available, use adb (some stock recoveries have "update from adb" which lets you sideload zips).
Good luck!

[Completed] [OP3] MultiROM TWRP recovery loss after custom ROM flash (LineageOs )

Hello friends,
I often used to flash several ROM since I had my OnePlus One phone, and now I'm currently facing one "little" problem with my OP3.
I have recently flashed the new official LineageOs custom ROM (which normally support MultiROM), since the recovery. After the flash, the output mentionned a successful flash, but after reboot, my phone were unable to boot properly and the recovery was not here anymore...(black screen).
The only option available until now is the fastboot mode. I tried many methods, like flashing several recoveries, unbricking my phone with the official guide made by Naman Bhalla...but nothing to do in order to get a proper and working system with a fully functional recovery...
Could someone help me?
My friendships,
S0bek
Hi !
Start by reverting to stock oos from the dedicated forum
When you arrive to fastboot flash recovery.img , don`t boot into android , just power off the device and boot into recovery using the buttons combination
Good luck !

Alcatel Pixi 4 (6) 8050D 2017 Edition - Stuck In Boot Loop No Recovery

So i got this phoen the other day and noticed the pre installed rom is taking up to many resources, so i decided to try and root the phone and install a custom rom, after the phone rebooted from using Kingo Root It got stuck in an infinite boot loop.
Phone just restarts over and over again, i help Power and Volume Up, this takes me to the boot loader screen and i selected recovery, now i jhad twrp installed and naturally assumed that it would go into recovery mode, Well it didnt and now i am stuck with a phone that just either restarts or sits in fastboot mode when i put it into it.
Any suggestions, to be honest i cant find any stock rom for it, this is the only phone i have and i need it.
Go to the official website and download upgrade tool .. it will identify the phone then downloads the firmware and u get ur stock ROM

LeEco 1s Stuck in Bootloop ( fastboot/download/recovery inaccessible)

Hi guys, i need your help!
i will try to explain the situation at my best.
A couple of days ago i decided to go back from a custom ROM to the Stock one via TWRP flash and i ended up with a soft brick, later i managed to flash the stock rom with SP Flash tool.
Yesterday i tried to get ROOT access on the fresh installed stock rom and considering that i wasn't able to get ADB and Fastboot to work properly on my pc (at the time) i used King Root, after that i tried to install TWRP through the official app, the result was not successful (the problem was the locked bootloader) and i found myself without recovery (neither TWRP or Stock).
Here comes the last part (the tricky one)
after all this mess I managed to get ADB and Fastboot to work and i obviously tried to unlock the bootloader, unfortunatly i hit "boot to recovery" and now i'm stuck with a boot loop with no recovery.
if i try to get to fastboot with Vol down+Power the phone shows the LeEco Logo and then the screen shuts down.
Sp Flash tools doesn't work either.
Any possible solution?
The thing u got wrong is that... U should have flashed twrp on either eui 5.8.17s or 5.8.19s...
Don't flash it on 14s or lower eui version ... It might get stuck on bootloop

Vernee Apollo stuck in bootloop, what to do?

Guys, in need of desperate help here!
I've heard my friends joking that girls are not good with tech so I decided to prove them wrong by flashing a custom ROM on my newly acquired Vernee Apollo phone. Well, that ended badly - I succeeded rooting it and installing SuperSU, but I bricked it when I tried flashing a ROM so now when I turn it on it stays on the Vernee logo.
I suppose I have to open TWRP recovery and reset my phone with the backup I created earlier but I can't access it - I can only access Recovery Mode and FastBoot Mode
In FastBoot mode I try to connect the phone to my PC and get to TWRP but adb doesn't find my device anymore...
And In Recovery mode, when I try to flash the ROM, it using 'Apply update from SD card' it says 'Opening update package...' and right after that 'Installation aborted' (and my battery is almost full).
Any help is appreciated! <3

Categories

Resources