[ROM][discovery][PIE] Resurrection Remix [DISCONTINUED] - Sony XA2 Ultra ROMs, Kernels, Recoveries, & Other

[ROM][discovery][PIE] Resurrection Remix [DISCONTINUED] - Sony XA2 Ultra ROMs, Kernels, Recoveries, & Other

Change log:
2019-08-17
RR accepted my commit:
https://github.com/ResurrectionRemi...mmit/db98cc9253b8680005b90122c48b40f633dc04e5
2019-08-16
-7.0.2 stable ENG and USERDEBUG build.
Had to edit a lot of whitelist permissions issues in RR itself to make this work. I created pull requests with RR, but if they don't add them, it makes repo sync difficult as I will have to make my edits all over again.

Rom notes:
As @Ultramanoid pointed out in LineageOS https://forum.xda-developers.com/showpost.php?p=80053444&postcount=219 You can use Open Camera to allow you to switch between all three cameras (one rear, two front).
Want to build your own custom kernels, custom roms, or learn the ins and outs of development? You can check out my video tutorials with over 24 hours of video and explanations here:
https://forum.xda-developers.com/android/general/guide-how-to-build-custom-roms-kernel-t3814251

Thanks given! Thank you so much man! Don't get me wrong I love Lineage but I was ready for some more rom love ?

Question though, I'm on the latest nightly of lineage, can I wipe and drop this gem on it with success?

appleknight said:
Thanks given! Thank you so much man! Don't get me wrong I love Lineage but I was ready for some more rom love ?
Click to expand...
Click to collapse
Yeah, I think @LuK1337 and the LineageOS team does a great job. I just like having a little variety, myself.
appleknight said:
Question though, I'm on the latest nightly of lineage, can I wipe and drop this gem on it with success?
Click to expand...
Click to collapse
You sure can, because that's what I just did. However, you may have to wipe and format data. :good:

Loving the rom keep up the good work? everything works but SD cards which was the same on lineage. Other than that this rom has the rr customization and is smooth like butter!

No issues here!

Yodasgodfather said:
Loving the rom keep up the good work everything works but SD cards which was the same on lineage. Other than that this rom has the rr customization and is smooth like butter!
Click to expand...
Click to collapse
appleknight said:
No issues here!
Click to expand...
Click to collapse
Great! Thanks guys! I used to build roms all the time, back before Oreo, but I took a break for a while and I'm trying to get back into the swing of things. I'll try to chase down that sdcard issue, I didn't have one in the phone to test it.
My usual MO is to build Lineage (already done by LuK1337), RR, AOKP, and SlimRoms (I don't think Slim has a working Pie at the moment), then move on to custom kernel work. We'll see what we can get done here. I also have two of these phones, so I'm hoping to finish building these roms, then update the phone to 50.2 firmware and update the device trees, kernel, and blobs to match and see if we can update the roms for the latest firmware. I can only image that @LuK1337 already tried this, so there must be some hangup in doing so, but we'll see what we can do. No promises, since I'm not the most skilled dev, but that's the overall plan.

Yodasgodfather said:
Loving the rom keep up the good work everything works but SD cards which was the same on lineage. Other than that this rom has the rr customization and is smooth like butter!
Click to expand...
Click to collapse
I just tested my sdcard, and it came right up. I could access the files and I started watching a video from there. What specifically doesn't work for you when you use an sdcard so I can troubleshoot that?

Oh? Well then what am I doing wrong cause for some reason the phone will freeze on setup unless I remove it? I dirty flash and follow the steps mentioned above? Perhaps is their a certain format aosp or certain Roms prefer like exfat or fat32... Etc

Yodasgodfather said:
Oh? Well then what am I doing wrong cause for some reason the phone will freeze on setup unless I remove it? I dirty flash and follow the steps mentioned above? Perhaps is their a certain format aosp or certain Roms prefer like exfat or fat32... Etc
Click to expand...
Click to collapse
Thanks for the info. So a few thoughts and questions, so we can get to the bottom of the issue:
Thought - I highly discourage dirty flashing. You never know what is left over from the last ROM. It makes trouble shooting very difficult.
Question - does it work without flashing gapps or magisk, just when you flash only the ROM? (This works for me here, just a clean install with only the ROM. I don't use gapps anymore, so that may matter.)
Question - if you do flash gapps or not, does it work if you boot the phone without it for the first boot, then power down and put it in for future use? E.g., does it work on subsequent boots, after setup is complete?
Question - what firmware are you running? And what phone variant?
Thanks, these things will help. Also, a huge help is pulling logs with logcat, so I can see the errors about the sdcard.
Question for the group: is anyone else successful in using the sdcard?

Just as a side note, I tried using the lineage addonsu zip(since this is lineage based). It definitely adds root to the developer options menu, but does nothing when an app tries to gain root( no dialog, toast etc..) just in case anyone wanted to know. So I went with magisk ?
---------- Post added at 06:20 PM ---------- Previous post was at 06:19 PM ----------
AlaskaLinuxUser said:
Thanks for the info. So a few thoughts and questions, so we can get to the bottom of the issue:
Thought - I highly discourage dirty flashing. You never know what is left over from the last ROM. It makes trouble shooting very difficult.
Question - does it work without flashing gapps or magisk, just when you flash only the ROM? (This works for me here, just a clean install with only the ROM. I don't use gapps anymore, so that may matter.)
Question - if you do flash gapps or not, does it work if you boot the phone without it for the first boot, then power down and put it in for future use? E.g., does it work on subsequent boots, after setup is complete?
Question - what firmware are you running? And what phone variant?
Thanks, these things will help. Also, a huge help is pulling logs with logcat, so I can see the errors about the sdcard.
Question for the group: is anyone else successful in using the sdcard?
Click to expand...
Click to collapse
No issues with sdcard here! H3223
---------- Post added at 06:26 PM ---------- Previous post was at 06:20 PM ----------
Question: is there a hide navbar setting? If so I missed it so I'm using an app called custom navigation bar, which I've had to use in the past, tho for some reason on this rom it's sometimes difficult to get to appear when you swipe up from the bottom, any ideas?
---------- Post added at 06:37 PM ---------- Previous post was at 06:26 PM ----------
AlaskaLinuxUser said:
Great! Thanks guys! I used to build roms all the time, back before Oreo, but I took a break for a while and I'm trying to get back into the swing of things. I'll try to chase down that sdcard issue, I didn't have one in the phone to test it.
My usual MO is to build Lineage (already done by LuK1337), RR, AOKP, and SlimRoms (I don't think Slim has a working Pie at the moment), then move on to custom kernel work. We'll see what we can get done here. I also have two of these phones, so I'm hoping to finish building these roms, then update the phone to 50.2 firmware and update the device trees, kernel, and blobs to match and see if we can update the roms for the latest firmware. I can only image that @LuK1337 already tried this, so there must be some hangup in doing so, but we'll see what we can do. No promises, since I'm not the most skilled dev, but that's the overall plan.
Click to expand...
Click to collapse
Would definitely love to see some slim love ? I developed for the z ultra back in the day. I never have the spare time anymore, full time parent n all

appleknight said:
Just as a side note, I tried using the lineage addonsu zip(since this is lineage based). It definitely adds root to the developer options menu, but does nothing when an app tries to gain root( no dialog, toast etc..) just in case anyone wanted to know. So I went with magisk
---------- Post added at 06:20 PM ---------- Previous post was at 06:19 PM ----------
No issues with sdcard here! H3223
---------- Post added at 06:26 PM ---------- Previous post was at 06:20 PM ----------
Question: is there a hide navbar setting? If so I missed it so I'm using an app called custom navigation bar, which I've had to use in the past, tho for some reason on this rom it's sometimes difficult to get to appear when you swipe up from the bottom, any ideas?
---------- Post added at 06:37 PM ---------- Previous post was at 06:26 PM ----------
Would definitely love to see some slim love ? I developed for the z ultra back in the day. I never have the spare time anymore, full time parent n all
Click to expand...
Click to collapse
Hear you there, I've got three and one in the oven! Kids are great, but they'll keep you busy!
As for the Nav bar, go to settings, RR tools, navigation, navigation, enable nav bar. :good:
There are several options as well, fling, standard, edited, etc. You'd have to play with them to get it all sorted out how you like it.

Congrats man! I meant to autohide the navbar, I don't see an option for it.

It doesn't I'm not able to access it. Doesn't matter if I flash gapps or not the phone will not boot properly with the SD card in and it works fine on stock. It was the same issue on lineage os. The setup will be stuck in a loop say its searching for networks and eventually crash the system. When I inserted it just now it kept saying "phone is starting" and just crashed. Should I try formatting the SD card? I have xa2 ultra h3223 just in case your wondering...

appleknight said:
Congrats man! I meant to autohide the navbar, I don't see an option for it.
Click to expand...
Click to collapse
Thanks! Sorry I didn't understand your request. Yes, the "expanded desktop" option will auto hide the status bar and/or the navbar per your preferences. Settings, display, advanced, expanded desktop. A swipe up brings the bar back. :good:
Yodasgodfather said:
It doesn't I'm not able to access it. Doesn't matter if I flash gapps or not the phone will not boot properly with the SD card in and it works fine on stock. It was the same issue on lineage os. The setup will be stuck in a loop say its searching for networks and eventually crash the system. When I inserted it just now it kept saying "phone is starting" and just crashed. Should I try formatting the SD card? I have xa2 ultra h3223 just in case your wondering...
Click to expand...
Click to collapse
I think formatting the card would be wise. If you used it as "built in" storage before, instead of for transferring files (the initial question it asks when you first put one in) you can run into trouble with it on other ROMs or phones. I have the same phone, and it is working for me and for appleknight, so it must be something with your phone or card. Let me know if formatting helps. :good:

Ah that works, still for some reason though I have to swipe a few times to get it to appear, almost seems like the sensitivity is off or something it's weird
---------- Post added at 12:26 AM ---------- Previous post was at 12:08 AM ----------
So do you think the RR team will make this an official build? ?

appleknight said:
[/COLOR]So do you think the RR team will make this an official build?
Click to expand...
Click to collapse
Not likely.... They'd need a device maintainer. You know, some skilled dev to keep things working and running smooth. As far as I know, LuK is too busy. :silly:

So far I really like this as my daily driver

Related

[OP3(T)][5.3.X(O)][AOSP] A.O.S.C.P: CypherOS [OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

This is CypherOS. An extension to the pure Android. Cypher tries to maintain the purity of Android while offering the most useful features to the users. The goal is to give the highest level of performance whilst achieving Simplicity.
· Ambient Display and Ambient Weather by Chris
· Internal Color Manager by Chris
· Substratum theming engine support (OMS)
· Statusbar - Quick pulldown, Smart pulldown, Network traffic indicators, Statusbar icon customization, Carrier Labels, Clock and Date custimization.
· Quick Settings - QS rows and columns, Wi-Fi easy toggle, Data easy toggle and more
· System - Screenshot types (Fullscreen and Partial area select) and PowerMenu customization
· Notifications - Force expanded notifications, Show notification count, Heads up customization, and Notification LED control.
!!! Flash on your own risk !!!
We will not take any responsibility for bricked devices or lost data. So please watch out!
- Make a (Nandroid) Backup of your current ROM (Recommended)
- Advance WIPE -> wipe /data
- Press install and select the AOSCP rom in sdcard
- Install ROM
- Install Gapps <ARM64-7.1-X>
- After flashing, reboot device (First reboot will take a while)
- Enjoy CypherOS on your device!
-- On dirty flash you need to also dirty flash gapps. The AOSCP survival script deletes them --
[02/02/18]
- Initial release
TeamWinRecoveryProject
Build Status
Official AOSCP Website
My Unofficial Builds Folder
Download Gapps
Temporary Link for Gapps 8.1
For the download of the released ROM always download the latest build
Root with SuperSU | Root with Magisk
Code:

Join the Community CypherOS on G+
Join us in Crowdin CypherOS on Crowdin to help us get AOSCP to your language
Join our help Community
- CypherOS
- LineageOS
- AICP
- PureNexus
- AOKP
- Dirty Unicorns
- and finally me ofc

XDA:DevDB Information
[OP3(T)][5.3.X(O)][AOSP] A.O.S.C.P: CypherOS [OFFICIAL], ROM for the OnePlus 3
Contributors
kessaras, steadfasterX, superfes, Sirhc
Source Code: https://github.com/CypherOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: 5.0.1++
Based On: AOSCP
Version Information
Status: Stable
Stable Release Date: 2018-02-02
Created 2018-02-03
Last Updated 2018-03-12

Reserved
>>>>>>>>>> BUG REPORTS <<<<<<<<<<
We first of all need to think well about it. If its a temperature problem, CPU problem, lag, low fps, display problem, bootloop, infinite boot, or any other problem that anyone would have noticed, but no one reported it, PLEASE think twice before you post it because its impossible to have such a bug and no one noticed it. So something you did wrong. Find it, or clean flash everything from zero.
TWRP, firmware , rom , gapps.
If it's something that propably not many people noticed, then yes take your time, when you have some, and make a nice bug report so i can also see the bug with my eyes and fix it !
Here you will find a very nice guide on how to make a useful log
~ If a stock app crashes or you have an error, i need a logcat and a small explanation on how to re-produce this error to see it with my eyes and fix it.
~ If you come upon a kernel panic , i need a dmesg and kmsg log.
**some more info about the logs: https://forum.xda-developers.com/showpost.php?p=74565097&postcount=94
Please make rensonsible bug reports and don't just come in and report anything that comes on your mind without thinking about it.
The purpose of a bug report is to fix the bug so that we can all enjoy a better rom.

Reserved

Can't wait to give it a try when I get home

kessaras said:
This is the first build. You will find it in the Unofficial folder.
On the next Official Release OP3(T) will be included in the build jobs.
Click to expand...
Click to collapse
Thanks, just flashed on 3T. Looks nice!
Looks like no sound and weird speaker popping instead of music when you try to play any mp3 on device.
SIM card wasn't detected on first boot, second one fixed that.

twoxa said:
Thanks, just flashed on 3T. Looks nice!
Looks like no sound and weird speaker popping instead of music when you try to play any mp3 on device.
SIM card wasn't detected on first boot, second one fixed that.
Click to expand...
Click to collapse
Good. I'm using it already and I'm gonna start debugging everything soon , so I'll get any issue it may have, fixed before the official release date.

deleted

When I last built Cypher, .dataservices stopped working on boot. Can't find any commits that would seem like it would fix that, did you do anything? Or am I just blind lol
*EDIT*
It looks like Chris did a bringup for the op3 again, probably why.

Does this rom replaces recovery? Cause my recovery is replaced and I'm stuck without volte... Can't make calls..
Is there any way i could get root on the recovery that comes with it without the need of pc/laptop?

ZVNexus said:
When I last built Cypher, .dataservices stopped working on boot. Can't find any commits that would seem like it would fix that, did you do anything? Or am I just blind lol
*EDIT*
It looks like Chris did a bringup for the op3 again, probably why.
Click to expand...
Click to collapse
Chris did. Me i was too late to start with it. i came 2nd.
demon507 said:
Does this rom replaces recovery? Cause my recovery is replaced and I'm stuck without volte... Can't make calls..
Is there any way i could get root on the recovery that comes with it without the need of pc/laptop?
Click to expand...
Click to collapse
No it doesn't. Can't flash boot over recovery unless we changed that in "build" which would replace all the people recovery in all roms.
And i don't understand what you are talking about. There is no recovery in it to get root on and generally in recovery mode (TWRP or Cyan) you have root privillages by default. It's impossible in the first place to go into recovery and not have root permissions to flash anything you want...........

kessaras said:
Chris did. Me i was too late to start with it. i came 2nd.
No it doesn't. Can't flash boot over recovery unless we changed that in "build" which would replace all the people recovery in all roms.
And i don't understand what you are talking about. There is no recovery in it to get root on and generally in recovery mode (TWRP or Cyan) you have root privillages by default. It's impossible in the first place to go into recovery and not have root permissions to flash anything you want...........
Click to expand...
Click to collapse
I flashed this rom over oos...now my recovery is not twrp...it says something like android recovery...i don't even recognize which recovery is that...anyways... I'll flash twrp once i get home after 4days...untill then no calls..

demon507 said:
I flashed this rom over oos...now my recovery is not twrp...it says something like android recovery...i don't even recognize which recovery is that...anyways... I'll flash twrp once i get home after 4days...untill then no calls..
Click to expand...
Click to collapse
Did u just say you flashed a custom ROM over Oxygen OS?

demon507 said:
I flashed this rom over oos...now my recovery is not twrp...it says something like android recovery...i don't even recognize which recovery is that...anyways... I'll flash twrp once i get home after 4days...untill then no calls..
Click to expand...
Click to collapse
thats called suicide

demon507 said:
I flashed this rom over oos...now my recovery is not twrp...it says something like android recovery...i don't even recognize which recovery is that...anyways... I'll flash twrp once i get home after 4days...untill then no calls..
Click to expand...
Click to collapse
You probably installed outdated twrp, i recommend you install latest Blu.Spark one.
Can you show pictures of this "recovery"?
Also did you really flash rom without wipe cache, system, data??
Why is there second aoscp 5.1 thread?

Ded_Boi said:
Did u just say you flashed a custom ROM over Oxygen OS?
Click to expand...
Click to collapse
I ain't stupid who would flash this over oos without wipe...i meant i flashed this over oos with wipe n all...
---------- Post added at 07:09 PM ---------- Previous post was at 07:07 PM ----------
RKBD said:
You probably installed outdated twrp, i recommend you install latest Blu.Spark one.
Can you show pictures of this "recovery"?
Also did you really flash rom without wipe cache, system, data??
Why is there second aoscp 5.1 thread?
Click to expand...
Click to collapse
I had blu spark twrp before... Anyway I'll fix it soon.

demon507 said:
I ain't stupid who would flash this over oos without wipe...i meant i flashed this over oos with wipe n all...
---------- Post added at 07:09 PM ---------- Previous post was at 07:07 PM ----------
I had blu spark twrp before... Anyway I'll fix it soon.
Click to expand...
Click to collapse
if you have root you can install it via flashify

Volte not working for Jio sim

twoxa said:
Thanks, just flashed on 3T. Looks nice!
Looks like no sound and weird speaker popping instead of music when you try to play any mp3 on device.
SIM card wasn't detected on first boot, second one fixed that.
Click to expand...
Click to collapse
Speakers not playing or popping,I've fix that just by running other player,now stock player plays.sim card was detected here,only it lasted few seconds to detect it,I've seen this "bug" before on 7.1.2 ROMs.I flashed Ceasium kernel,and magisk 14.0>15.3,busybox...everything is fine for now.im big fan of Aoscp,Nos and this are my roms of choice.there are also other great roms,there's no doubt,but I prefer this two.thanks to guys who cooked it:thumbup:
Edit:I also see there's 03.02 build made
Sent from my One+3T

Amazing ROM! Everything works just fine! The only difference with the second build I've found is that the screen-off animation is gone, now it is just a fade. Great work by the way!
Sent from my ONEPLUS A3000 using Tapatalk

No network shows on the status bar . And will you add an new function in order to swap the back button and menu ?:silly:

M7+M7vzw+M7spr AICP-13.1-O 8.1 UNOFFICIAL BUILDS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 13.1
Download link m7: https://www.androidfilehost.com/?w=files&flid=239910
Download link m7vzw: https://www.androidfilehost.com/?w=files&flid=238220
Download link m7spr: https://www.androidfilehost.com/?w=files&flid=239908
Full Changelog link: http://dwnld.aicp-rom.com/
Google Apps:
(link the best one for your device, there are several variants out there right now, pico/nano gapps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Go to Aicp Extras/Navigation bar, and enable it.
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I keep losing root with Magisk, how do I fix it?
A. Check this out. If that doesn't work for you, ask for help in this thread, read or ask in the Magisk thread on XDA or just re-flash Magisk!
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the deivce, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine
KERNEL:
The kernel in this ROM follows LAOS source with custom additions.
PREREQUISITE FOR OTA:
To be able to flash using the built-in OTA app, TWRP recovery is needed.
You can still use the LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. The Zipfile gets saved in the "aicp_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/icxj1/android_kernel_htc_msm8960/tree/o8.1
ROM & Additional links:
AICP Gerrit Code Review
AICP on Github
AICP G+ community
Contributors:
@icxj1
@alial04
@tathanhlam66
ROM OS Version: 8.1.x Oreo
Kernel: Linux 3.4.113
Version Information: Development
Status: UNOFFICIAL
Release Date: 02-28-2018
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
HTC ONE M7ul,wlv,wls, ROM for the HTC One (m7)
Contributors
icxj1, alial04
Source Code: https://github.com/AICP/platform_manifest
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: All of the above
Version Information
Status: Testing
Created 2018-02-28
Last Updated 2018-02-27

[/ATTACH][/ATTACH]

This ROM is testing & development. I know it must be hard for some to comprehend, the source is not complete yet. And the more they advance the less compatible m7 becomes.
Please report bugs with logs! No need to report what works on N ROM that does not work on O. M7 is not compatible for Oreo & i have many modifications to make it work. If you cannot live with a few bugs for awhile then GTFO! I do not get paid to maintain or develop so I don't want to here your pissing & moaning about an piece of **** obsolete device.
Bugs= "system process isn't responding" anr warning on boot. Select wait & carry on. This is caused by system partition not being mounted early enough in the boot process. 8.0+ expects an early mounted system partition. This is handled in the kernel by use of a separated dts, our kernel does not support dts for m7.
Lock screen with pin or password causing problems for some user's. not sure the entire issue, but reports of waiting up to 5 minutes to unlock. ??? send logs on this please.
Rooted devices must enable d2tw & pocket mode in kernel aduitor to fix proximity wake not working on outgoing phone call, (when screen is black dt2w it). Not an issue on non-rooted devices.
It is pointless to post here, most don't read it & will report the same bugs over & over in thread.

Should have ffcamera in this one & mobile settings partialy fixed, no data usage info & quick settings tile will crash. please do not report these bugs, i already have logs for them. enjoy!
m7 += https://www.androidfilehost.com/?fid=673956719939822539
m7vzw += https://www.androidfilehost.com/?fid=890129502657586018
m7spr += https://www.androidfilehost.com/?fid=746010030569956907

Can you guys make a kernel with wake gestures included?

lucyr03 said:
Can you guys make a kernel with wake gestures included?
Click to expand...
Click to collapse
They are already working on it but it makes some problems with oreo. If it is working they will release it.

Hi @icxj1
Thanks for the developement work!
May I ask,...? What's about Google certification? PlayStore says: "not certified".
And Magisk says: "basicIntegrety: true" but "ctsProfile: false"
Will you even work on that? That would be great. Thank you very much.
samhhmobil

samhhmobil said:
Hi @icxj1
Thanks for the developement work!
May I ask,...? What's about Google certification? PlayStore says: "not certified".
And Magisk says: "basicIntegrety: true" but "ctsProfile: false"
Will you even work on that? That would be great. Thank you very much.
samhhmobil
Click to expand...
Click to collapse
Gapps are beta, search their unofficial thread & see if you can find anything. And m7 will probably have to start using the magisk universal cts module. Search magisk modules for zip.
https://forum.xda-developers.com/an...cial-opengapps-builds-android-t3743495/page28

samhhmobil said:
Hi @icxj1
Thanks for the developement work!
May I ask,...? What's about Google certification? PlayStore says: "not certified".
And Magisk says: "basicIntegrety: true" but "ctsProfile: false"
Will you even work on that? That would be great. Thank you very much.
samhhmobil
Click to expand...
Click to collapse
Flash this zip in twrp to fix safetynet, I tested it and working fine on this rom.
https://www.androidfilehost.com/?fid=962187416754455235

first of all, thx for sharing all the work, the rom (20180228) works very smooth and definitely usable this time. besides the known bugs, i've also noticed (so far) problem with the proximity sensor (not working incalls and cpuz), wifi doesn't reconnect when registered network becomes visible (i have to turn it on and off to get it going), some wifi drops (occasionally) and wifi disconnecting while sleep (also occasionally).
sorry no logs, will do them when can, just wanted to say thank you!
edit: also, i have to reinsert the sim card upon restart.

olivrd said:
first of all, thx for sharing all the work, the rom (20180228) works very smooth and definitely usable this time. besides the known bugs, i've also noticed (so far) problem with the proximity sensor (not working incalls and cpuz), wifi doesn't reconnect when registered network becomes visible (i have to turn it on and off to get it going), some wifi drops (occasionally) and wifi disconnecting while sleep (also occasionally).
sorry no logs, will do them when can, just wanted to say thank you!
edit: also, i have to reinsert the sim card when os booted.
Click to expand...
Click to collapse
This device, the m7 allways had wifi problems even with stock rom it drops sometimes and doesnt connect when a known network is around sometimes. That must be related to the hardware because it was in all android versions from 4.1.2 up to 8.1 in stock and all custom roms the same no matter which firmware is used stock sense or gpe.

olivrd said:
first of all, thx for sharing all the work, the rom (20180228) works very smooth and definitely usable this time. besides the known bugs, i've also noticed (so far) problem with the proximity sensor (not working incalls and cpuz), wifi doesn't reconnect when registered network becomes visible (i have to turn it on and off to get it going), some wifi drops (occasionally) and wifi disconnecting while sleep (also occasionally).
sorry no logs, will do them when can, just wanted to say thank you!
edit: also, i have to reinsert the sim card upon restart.
Click to expand...
Click to collapse
For the sim card problem you just need to enable then disable airplane mode instead of reinserting it.
---------- Post added at 21:21 ---------- Previous post was at 21:20 ----------
Did anyone managed to install V4A on this rom? I installed it but the driver isn't functional.

lucyr03 said:
For the sim card problem you just need to enable then disable airplane mode instead of reinserting it.
Click to expand...
Click to collapse
Aha, good idea. It seems this sim card issue is only happening on m7 if build m7vzw first. Next builds I will make clean & run m7 first then will see if problem still exist.

lucyr03 said:
For the sim card problem you just need to enable then disable airplane mode instead of reinserting it.
---------- Post added at 21:21 ---------- Previous post was at 21:20 ----------
Did anyone managed to install V4A on this rom? I installed it but the driver isn't functional.
Click to expand...
Click to collapse
Is that video related?

icxj1 said:
Is that video related?
Click to expand...
Click to collapse
I don't know about video, it just shows driver: abnormal, neon: no, audio processing: unsupported and of course any settings have no effect.

lucyr03 said:
I don't know about video, it just shows driver: abnormal, neon: no, audio processing: unsupported and of course any settings have no effect.
Click to expand...
Click to collapse
Aha, oK. I will look into it. Thanks

lucyr03 said:
Flash this zip in twrp to fix safetynet, I tested it and working fine on this rom.
https://www.androidfilehost.com/?fid=962187416754455235
Click to expand...
Click to collapse
Thanks, THAT'S IT. Great.
---------- Post added at 08:13 PM ---------- Previous post was at 08:00 PM ----------
I see, it's working very well.
- Video recording in Camera app is not working (as told before by some other member).
- GPS is marked as "Supported" but Enabled "No", and not possible to enable (but working GPS is important to me, so we have to wait for the devs and their great work).
- IR is marked as "Not supported" - even it is in the device -, sigh (it's not really very important to me, but it's "nice to have").
- Mobile data work correctly, but it's impossible yet to switch it off.
- WiFi works to me, even reconnects.
Thanks again,
samhhmobil

lucyr03 said:
For the sim card problem you just need to enable then disable airplane mode instead of reinserting it.
Click to expand...
Click to collapse
tried this, but not working, still had to reinsert it, at least on my device (international version)

olivrd said:
tried this, but not working, still had to reinsert it, at least on my device (international version)
Click to expand...
Click to collapse
I have international version too but with GPE firmware.
Sent from my OnePlus 2 using XDA Labs

lucyr03 said:
I have international version too but with GPE firmware.
Click to expand...
Click to collapse
same here

[ROM][Pie][OFFICIAL] Resurrection Remix v7.0.2 [evert]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix P
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.

Make sure you have the latest TWRP.img
Download the latest RR-P zip and GApps zip (opengapps nano or smaller)
fastboot boot twrp.img (NEW!! See post #2 for info on installing TWRP)
If coming from stock for the first time, flash copy-partitions-AB.zip from second post (It takes a backup of active slot to inactive slot)
In TWRP, choose -> Wipe -> Format data and type "yes" at the prompt (Note: this will wipe internal storage)
Flash latest RR-P.zip
Reboot and let the ROM boot once (it is necessary to reboot between ROM flash and GApps/Addon flash due to slot-swap logic)
Reboot back to bootloader and fastboot boot twrp.img again
In TWRP, choose -> Wipe -> Format data and type "yes" at the prompt (You may be able to get away with just doing a factory reset at this point, but that's on you to try)
Flash Google Apps package (optional)
Flash Magisk (also optional) (Note: If Magisk doesn't stick after setting up your device, fastboot boot twrp.img one last time and flash it again, no need to wipe anything)
First boot may take up to 10 minutes.
ROM Download
GApps
Resurrection Remix Source
Device Source
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.

XDA:DevDB Information
Resurrection Remix Pie v7.0.2, ROM for the Moto G6 Plus
Contributors
Jleeblanch, erfanoabdi, rahulsnair, RR Team
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2019-02-25
Created 2019-02-26
Last Updated 2019-04-21

Copy partitions zip & TWRP installation info
[size=+2]Important info, please read...[/size]
Starting from build 20190414, encryption is disabled (temporarily) and you must clean flash
The new TWRP version now supports decryption on Pie when booting twrp. However, I have updated TWRP to include the new magisk repacktools which allows users to download and install one twrp.img without the need of an installer zip. The reason behind releasing the ROM with encryption disabled? If you were to try to install TWRP while using an encrypted ROM, you would end up in a bootloop that would bring you back to TWRP. But, install TWRP on a ROM with encryption disabled, and everything works as expected.
[size=+1]TWRP Installation[/size]
-> TWRP download || twrp-3.3.0-v2-evert-jlb.img
->>> The twrp.img you download above will also be the same twrp.img you will install, so make sure to put a copy on your device as well
-> Boot twrp
Code:
fastboot boot twrp-3.3.0-v2-evert-jlb.img
-> In TWRP, choose Advanced / Install Recovery Ramdisk
-> Select the twrp-3.3.0-v2-evert-jlb.img
->>> At this point twrp will automagically unpack your boot.img and the twrp.img, swap out the recovery-ramdisk, and repack your boot.img. When this process completes, twrp will be permanently installed.
->>> Always flash Magisk AFTER you've installed twrp
-> Reboot and enjoy. You should now be able to reboot to recovery from the Power Menu!!
DO NOT try to install twrp on an encrypted rom. You will most likely end up in a bootloop, you have been warned!
Important
To keep TWRP installed between ROM updates, there is a Magisk Module named "TWRP A/B Retention Script" by @osm0sis. Search for it within Magisk Manager Downloads section. You'll want to flash this script zip after each OTA has installed, but before you install Magisk to the Inactive Slot from Manager.
[size=+1]Coming from stock?[/size]
Make sure to flash the copy-partitions-AB.zip in twrp before you do anything else. You can download it from the attachment below...

Reserved

Cool, i will test it now (im glad its official).
Ps dont do it "Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution"
i meant wiping system.. even if we install custom rom after this it will be no os installed as twrp says.

Woks awesome, thank you dev

Excellent ROM.
Always loved RR ROMs.
Only downside I have is wondering if there will be anyway to get Google Pay working, as unfortunately it doesn't on this ROM.
Also, how can I disable the one button navigation style, as when I have a NAV bar on, I still have functions on my one button.
TIA.

WYPIERDAALAAC said:
Cool, i will test it now (im glad its official).
Ps dont do it "Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution"
i meant wiping system.. even if we install custom rom after this it will be no os installed as twrp says.
Click to expand...
Click to collapse
The install instructions in the OP are generic, and don't necessarily apply for this device. You're better off following the install instructions from Lineage-16.0. I will update the OP with proper install instructions when I have some time asap.
LDMx96 said:
Excellent ROM.
Always loved RR ROMs.
Only downside I have is wondering if there will be anyway to get Google Pay working, as unfortunately it doesn't on this ROM.
Also, how can I disable the one button navigation style, as when I have a NAV bar on, I still have functions on my one button.
TIA.
Click to expand...
Click to collapse
For now, if you've flashed Magisk, you can flash my Magisk module (or any module) that will help pass safetynet and show device as being certified in Play Store. This is why Google Pay doesn't work.
I had updated some blobs and build fingerprint to match the stock Pie update, but it seems to be causing the device to fail safetynet. I will have this fixed in the next update.
As for the fingerprint gestures always being enabled. I'm looking into this too. I'm assuming this has something to do with an overlay I added to insure the navbar was enabled on first boot (as without it, it's not). I hope to have this fixed for the next update as well.

Jleeblanch said:
For now, if you've flashed Magisk, you can flash my Magisk module (or any module) that will help pass safetynet and show device as being certified in Play Store. This is why Google Pay doesn't work.
I had updated some blobs and build fingerprint to match the stock Pie update, but it seems to be causing the device to fail safetynet. I will have this fixed in the next update.
As for the fingerprint gestures always being enabled. I'm looking into this too. I'm assuming this has something to do with an overlay I added to insure the navbar was enabled on first boot (as without it, it's not). I hope to have this fixed for the next update as well.
Click to expand...
Click to collapse
No problem, I won't flash Magisk if you're looking at getting it fixed I will just hang fire, it's not a much needed thing anyway, as Google Pay isn't a much needed thing for me, was just handy.
As for the Fingerpring Gestures that's fine, it's not harmful, I just thought I'd mention it.
I'm loving it so far, not had any problems all good.

Awesome! I'm using magisk with Ainur Sauron and Viper, working flawlessly! Everything works pretty well so far. Thanks for the amazing job!
I flashed it over the stock pie without wiping system, only factory reset. I don't know if this helps because I'm still a newbie P, just sharing!
RR rocks!

LDMx96 said:
No problem, I won't flash Magisk if you're looking at getting it fixed I will just hang fire, it's not a much needed thing anyway, as Google Pay isn't a much needed thing for me, was just handy.
As for the Fingerpring Gestures that's fine, it's not harmful, I just thought I'd mention it.
I'm loving it so far, not had any problems all good.
Click to expand...
Click to collapse
I will fix it, yes. It seems I got it right on Beckham, but not so much on Evert lol. Anyway, I'll have an update ready for the weekend. I don't use Google Pay much myself either, although as you said, it is handy. I'd prefer things worked out of the box rather than needing workarounds to fix things.

Jleeblanch said:
I will fix it, yes. It seems I got it right on Beckham, but not so much on Evert lol. Anyway, I'll have an update ready for the weekend. I don't use Google Pay much myself either, although as you said, it is handy. I'd prefer things worked out of the box rather than needing workarounds to fix things.
Click to expand...
Click to collapse
No worries mate, I'll look forward to the update on the weekend then.
Thanks a bunch.

Excellent rom, I like it all of them, but it seems that it's only me who have trouble in calls, I can't hear nothing when I use headphones, it only works without headphones.
Pd. Sorry for my English

asesinodilusion said:
Excellent rom, I like it all of them, but it seems that it's only me who have trouble in calls, I can't hear nothing when I use headphones, it only works without headphones.
Pd. Sorry for my English
Click to expand...
Click to collapse
I've just tested this too, no call volume when earphones are connected, but fine once disconnected.

asesinodilusion said:
Excellent rom, I like it all of them, but it seems that it's only me who have trouble in calls, I can't hear nothing when I use headphones, it only works without headphones.
Pd. Sorry for my English
Click to expand...
Click to collapse
LDMx96 said:
I've just tested this too, no call volume when earphones are connected, but fine once disconnected.
Click to expand...
Click to collapse
Someone mentioned this on telegram as well. If this is the only bug anyone has encountered, that's kinda awesome [emoji6].
However, as I don't have a pair of headphones to test with and possibly reproduce the issue, can one of you (or both) please get a log? I just need someone to reproduce the issue while taking a logcat and attach it here so I can diagnose and fix the issue.

Jleeblanch said:
Someone mentioned this on telegram as well. If this is the only bug anyone has encountered, that's kinda awesome [emoji6].
However, as I don't have a pair of headphones to test with and possibly reproduce the issue, can one of you (or both) please get a log? I just need someone to reproduce the issue while taking a logcat and attach it here so I can diagnose and fix the issue.
Click to expand...
Click to collapse
There is a manual or some guide to do that? Please

asesinodilusion said:
There is a manual or some guide to do that? Please
Click to expand...
Click to collapse
There are basic instructions in the OP to take logs on the device using Matlog. There is also a decent tutorial here on xda: [Tutorial] How To Logcat

Jleeblanch said:
Someone mentioned this on telegram as well. If this is the only bug anyone has encountered, that's kinda awesome [emoji6].
However, as I don't have a pair of headphones to test with and possibly reproduce the issue, can one of you (or both) please get a log? I just need someone to reproduce the issue while taking a logcat and attach it here so I can diagnose and fix the issue.
Click to expand...
Click to collapse
https://www.dropbox.com/s/rqz2t7d57epq7i9/data.txt?dl=0
I hope this help

BT Calling not working
Hello together,
i installed th RR Rom on my phone and everything seems to be fine.
BUT the only thing is, "Bluetooth Calling" does not work. I tried it with to different Bluetooth devices, my oneplus wireless bullets, and my car.
No Microphone and no Sound is Working, very rare.
But when i do BT Calling with SIGNAL or VOIP app CSipSimple everthing is fine. It looks like, that the only problem is the telefone app itself from android pie.
Before i used the [ROM][UNOFFICIAL]LineageOS-16.0[Evert][Moto G6 Plus] and BT Calling was working fine!
Does someone have a tip for me, where i can take a look?
Thanks a lot.
Greetings

It works very well, except for the detail that sometimes there is lag and when making or receiving a call there is too much noise
Enviado desde mi Moto G6 Plus mediante Tapatalk

titofariasl said:
It works very well, except for the detail that sometimes there is lag and when making or receiving a call there is too much noise
Enviado desde mi Moto G6 Plus mediante Tapatalk
Click to expand...
Click to collapse
Is there any way of improving in-call audio quality? There is just too much background noise.

[ROM][UNOFFICIAL][matisse][millet] LineageOS 16.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Installation instructions :
Be sure to have installed latest TWRP recovery (you can find it in downloads) and latest Android Lollipop (5.0.2 for matisse, 5.1.1 for millet) firmware
Download the latest build and GApps (ARM, 9.0, I advice pico package) - if you'll go to wipe even internal storage, put them on a microSD or an USB OTG, or copy them after wiping it
Boot to recovery mode
Wipe > Advanced wipe > Select system, data, cache and dalvik/art cache (and, if you want to clean more, select even internal storage, which deletes all the content in /sdcard) and do swipe to wipe. When it finishes, go to home page
Install > select ROM zip file > swipe to flash and, when it finished, go to home page
Do the same thing to flash GApps
Reboot > System
Update instructions :
Be sure to have installed latest TWRP build
Download the latest build
Boot to recovery mode
Install > select ROM zip file > swipe to flash and, when it finished, go to home page
Reboot > System
Known issues :
Magnetic cover doesn't trigger magnetic sensor (it works, but it's too little sensible).
Some randomic minor issues with YouTube app (sometimes, after skipping ads in a video, you'll get just a grey screen - close and reopen video to fix the issue)
Some randomic issues with bluetooth MAC address (bluetooth app crashes always). To fix this, you need to get (take note!) the address by going to stock ROM and getting that from Settings > About tablet menu. Then, come back to LineageOS 16 and rewrite the file /efs/bluetooth/bt_addr by using root permissions and a root file explorer, or by using adb push/pull, better in TWRP.
In all millet, camera crashes when trying to take pictures and can't zoom
5 GHz WiFi networks between channels 149 and 161 are invisible to the Tab
In matisse3g and millet3g SIM isn't working
Downloads :
All models (from 2022-12 build): https://github.com/matteo0026/OTA/releases
Mirror for all models: https://t.me/tab4los
matisse (10.1) devices (until 2022-09 build): https://androidfilehost.com/?w=files&flid=304073
millet (8.0) devices (until 2022-09 build): https://androidfilehost.com/?w=files&flid=304074
TWRP recovery: https://forum.xda-developers.com/tab-4/development/recovery-twrp-recovery-matisse-millet-t4019831
GApps: https://opengapps.org/ (ARM, 9.0, I advice pico package)
Contributors
matteo0026, DJABHipHop, Alastor89, All the S3NEO devs that provided the base for developing Pie on Tab 4
Source Code:
https://github.com/lineageos for samsung msm8226 common device and kernel source, with some patches coming from Gerrit for device source
https://github.com/s3neo for matisse and millet and specific variants device and vendor source

Failed to flash
Hi I am running into an issue flashing your rom in recovery. I have TWRP 3.0 flashed and when I flash your rom I get the following error:
E: unknown command [log]
Updater process ended with ERROR: 7
Error installing zip file /sdcard/lineage-16.0.20200108-UNOFFICIAL-milletwifi.zip
I have redownloaded the rom multiple times to verify that the zip isn't broken. I am flashing it on a SM-T230NU that is rooted as well.

Flash latest TWRP
---------- Post added at 08:14 AM ---------- Previous post was at 07:38 AM ----------
judgemstr said:
Hi I am running into an issue flashing your rom in recovery. I have TWRP 3.0 flashed and when I flash your rom I get the following error:
E: unknown command [log]
Updater process ended with ERROR: 7
Error installing zip file /sdcard/lineage-16.0.20200108-UNOFFICIAL-milletwifi.zip
I have redownloaded the rom multiple times to verify that the zip isn't broken. I am flashing it on a SM-T230NU that is rooted as well.
Click to expand...
Click to collapse
But your device is neither millet (t33* series) or matisse (t53* series) so it is not compatible

SM-T335 / Tab4 8.0 LTE / milletlte
Thanks a lot for the ROM! 1st was trying to get the LightningFastRom running but ended up in a bootloop to recovery with the Lineage 16 versions.
Then got to the Telegram channels and saw there that you opened that thread @xda here and gave it a shot.
After a clean install I am really happy especially because the phone part works!
Not tested Skype yet and Camera is not really the burner anyways
Even so, any idea if there is a working Google Camera Mod available?
One thing I figured out: the tablet does not go to sleep/shuts down the display anymore if I close my cover (magnetic one). Any idea how to solve that?
Again thank you very much!!!

Everytime I try to install it with gapps I get a booloop in T530. I'm flashing ARM 9.0 Nano, is this correct?
Edit: NVM, just took longer to boot. Working flawlessly.

Nice dude!
Wow even though the tablet is old you actually made it happen! My tablet is now pretty useless so i can test this for you Good job dude

Great work first off...
I have reflashed a number of times:
1. os, 2. reboot to recovery, 3. flash gapps, 4a. flash su enabler for lineageOS (was not compiled with ‘export WITH_SU=true’) or 4b. even magisk.
Reboot, setup - enable root for apps/adb via developers tools. Works : but something stops it from going forward and 'sticking' then the app reverts to non-SU state and says Root not available.
I have searched, I have found little on this... any help would be appreciated. If there is an 'easy' way then great but many things are not ever so easy.
Thanks in advance...
*Edit*
It has something to do with more than just the ROM or flashing, on any 7.1.1 it is the same... not sure where to go from here.
SU can be installed and openly visible, even works for seconds and then KNOX? or Some other protection brings it back to unavailable.
**Final Edit**
Sorry everybody, I have not rooted since Gingerbread... I was getting rusty.
All is good, I only needed to mount /system as RW to copy my hosts file into place. I feel a bit silly.
@matteo0026:
Really great work, this tablet is doing GREAT with your ROM and TWRP. Thank you for taking the initiative!
Keep up the Community Love!

Thank you very much for supporting 6 years old devices... Please keep your work.

Has anyone had a problem with the milletlte/tmoT337T or T335 going directly into safemode after installation. It happened to me on LOS 14, 16 and the latest 20200110 build.
Thanks.

how do media apps work on the rom.any issues.also do plan on using the rom on the device as i have no longer bought tablets in a while.most of these devices have been phone as they have better performance then the mid ranged priced tablets.

donj001 said:
Has anyone had a problem with the milletlte/tmoT337T or T335 going directly into safemode after installation. It happened to me on LOS 14, 16 and the latest 20200110 build.
Thanks.
Click to expand...
Click to collapse
Are you sure that you installed latest firmware before installing this ROM?
mrk2815 said:
how do media apps work on the rom.any issues.also do plan on using the rom on the device as i have no longer bought tablets in a while.most of these devices have been phone as they have better performance then the mid ranged priced tablets.
Click to expand...
Click to collapse
What do you mean by media apps? Make practical examples, please.
Anyway, I'm going to build and upload new builds with security patches updated to February 2020. So, new builds start from today, 21st February. I can't build and upload all the builds fast because I'm using a medium-range laptop and an ADSL connection at 1 Mbps in upload.

matteo0026 said:
Are you sure that you installed latest firmware before installing this ROM?[/QUOTE
I'm on the last 5.1.1 that TMobile released for that Tab 4. But I'm glad for the response and I'll give the new builds a try. Thank you.
Click to expand...
Click to collapse

donj001 said:
matteo0026 said:
Are you sure that you installed latest firmware before installing this ROM?
Click to expand...
Click to collapse
I'm on the last 5.1.1 that TMobile released for that Tab 4. But I'm glad for the response and I'll give the new builds a try. Thank you.
Click to expand...
Click to collapse
Oh now I saw that I forgot to build and upload the version for milletltetmo! Sorry! When it'll be uploaded, I'll tell you.

* Last firmware update 12/2016
* TWRP milletltetmo image
* Magisk v20
* Full wipe
* No errors on install
Flashed the latest 16 build.
Bootloops every time.
Could not get logcat
I am very happy to test the ltetmo builds. I'm not sure anyone but me is using it.
Thanks

matteo0026, thanks for build these roms for tab4 tablet.i have another tablet which devs don't even want to develop for which is stuck on android 7.1.2.at least the tab 4 has multi development love even though both tablets are from the same time frame of 2014. a tab 4 which i got from a family member and plan on using it asa good tablet .wwill you anounce hwen you have new builds here.thanks again. the media apps that i was talking about playing wer netflix, youtube and apps like that . i know that apps like tune in , and i heart radio fm usa will probably work for streaming audio i was jsut asking about video playback. .

any plans to keep teh project going with monthly security updates or maybe think about a lineage 17.1 build to android 10 for the devices.just wondering. i have flashed and kept alot of devices alive through either official or unofficial builds of cm 12-14, to lineage 14.1 to 16.0 from all the way from samsung galaxy s2 to all the way up to nexus 6p and pixel XL. so i dont mind doing the work and learning. .

mrk2815 said:
matteo0026, thanks for build these roms for tab4 tablet.i have another tablet which devs don't even want to develop for which is stuck on android 7.1.2.at least the tab 4 has multi development love even though both tablets are from the same time frame of 2014. a tab 4 which i got from a family member and plan on using it asa good tablet .wwill you anounce hwen you have new builds here.thanks again. the media apps that i was talking about playing wer netflix, youtube and apps like that . i know that apps like tune in , and i heart radio fm usa will probably work for streaming audio i was jsut asking about video playback. .
Click to expand...
Click to collapse
Don't do 2 messages. We are in a forum, so you have all the time to edit the old post.
Anyway, I don't think Netflix works, as other feedbacks told me (app can't be found on play store because of problems with safetynet I guess), but YouTube yes, of course.
mrk2815 said:
any plans to keep teh project going with monthly security updates or maybe think about a lineage 17.1 build to android 10 for the devices.just wondering. i have flashed and kept alot of devices alive through either official or unofficial builds of cm 12-14, to lineage 14.1 to 16.0 from all the way from samsung galaxy s2 to all the way up to nexus 6p and pixel XL. so i dont mind doing the work and learning. .
Click to expand...
Click to collapse
I'll keep this build with security patches. Unfortunately, I haven't a good computer to build them and a good Internet connection to upload them, but I'll try to do all I can do.
Lineage 17.1 is already on the way (look at the LightningFastRom 17.1 by DJabHipHop), but it isn't as stable as lineage 16.0. Another thing is that I have a matissewifi, but I can't use it because the mobo is broken and probably requires a work of microsoldering. So, I can't test personally the builds...

Hi,
I´ve installed this rom on my Tab 4 10.1 wifi a few days ago and I´m really impressed. Thank you for your great work!
The rom is working smooth and stable in general. But there´s a problem with the Xiaomi Home app. I'm using this app to control my Roborock S5. Starting the app works fine. It´s even possible to log in or create a Xiaomi Account etc. But when I try to open the control panel of the Roborock S5, the whole system crashes while the app is downloading the map from the Roborock S5. The system reboots completely without any warning. This happens every time at the same moment. On other devices (Tablets, Phones) the app works without any problems. I had the same issue with another app that´s installed on the Tab 4 but it only happened once. I think, there´s some kind of a bug in the system. Is it possible to find and fix it?
As far as I can tell, everything else (accept the dark rear camera) is working fine.
EDIT: My Roborock S5 got an firmware update yesterday and now the app/Tab 4 doesn´t crash anymore.

heres my question with this one.do you have to format internal storage to decrypt as i dont know if theis device is encrypted. Before wiping and installing rom and gaps.just wondering as i had to do that to another device in order to install the rom an dnot to have twrp pass word screen come up an for the lineage rom to boot to lineage set up screen. jus want the exact steps so tha icna havea correct installation. as i am only going to do this once to this device.
---------- Post added at 07:07 PM ---------- Previous post was at 07:00 PM ----------
here's my question.with the installation of the rom. do you have to format internal storage an then wipe and install rom and gapps . what is the exact correct process that i need toperform to have a correct installation of the rom.i cant provide development but i can provide testing of your builds.

mrk2815 said:
heres my question with this one.do you have to format internal storage to decrypt as i dont know if theis device is encrypted. Before wiping and installing rom and gaps.just wondering as i had to do that to another device in order to install the rom an dnot to have twrp pass word screen come up an for the lineage rom to boot to lineage set up screen. jus want the exact steps so tha icna havea correct installation. as i am only going to do this once to this device.
---------- Post added at 07:07 PM ---------- Previous post was at 07:00 PM ----------
here's my question.with the installation of the rom. do you have to format internal storage an then wipe and install rom and gapps . what is the exact correct process that i need toperform to have a correct installation of the rom.i cant provide development but i can provide testing of your builds.
Click to expand...
Click to collapse
Encryption isn't supported in my build of TWRP, so don't try to do that with LineageOS.

[ROM][H830|H850|RS988] UNOFFICIAL LineageOS-17.1 for G5

What is working:
WiFi
Camera
GPS
NFC
2.4 Ghz Hotspot
USB OTG
What is NOT working:
VoLTE and WiFi calling do not (and most likely never will).
5.0 Ghz Hotspot
Encrpytion is untested, so it may fail.
Anything else NOT listed above might or might not work. I will adjust as necessary and reports. If anyone has any knowledge and can troubleshoot and fix the NOT working items, let me know.

Here is how I capture logs. You need to ensure you can do this right at boot and will need to setup ahead of time.
You need to have root, either su, or "adb root". Verify you can get root quickly.
Here are the steps I do to accomplish this. This is a Linux system, so windows will vary slightly.
Reboot the phone while plugged into the computer.
At a shell, keep attempting to get root/shell:
Code:
adb root ; adb shell
Once connected, immediately paste the following (to capture logs).
Code:
cd /cache
nohup dmesg -w > dm &
nohup logcat -b all > lc &
If you have root installed via Magisk as "su":
Reboot the phone while plugged into the computer.
At a shell, keep attempting to get root/shell:
Code:
adb shell
Once connected, immediately paste the following (to capture logs).
Code:
su
cd /cache
nohup dmesg -w > dm &
nohup logcat -b all > lc &
Once Phone reboots, or boots up. The needed files are in /cache "lc" and "dm", and are available in TWRP even.

Thank you for your efforts and support. I will try as soon as possible
Sent from my LGE LG-H850 using XDA Labs

Thanks, @x86cpu I'll start working on my new threads for Havoc OS and Pixel Experience. I was also curious about this commit does this have anything to do with going Official.

ROMSG said:
Thanks, @x86cpu I'll start working on my new threads for Havoc OS and Pixel Experience. I was also curious about this commit does this have anything to do with going Official.
Click to expand...
Click to collapse
That's just the wiki getting added.
https://review.lineageos.org/c/LineageOS/hudson/+/267517
That above is more what you might be looking for.

x86cpu said:
That's just the wiki getting added.
https://review.lineageos.org/c/LineageOS/hudson/+/267517
That above is more what you might be looking for.
Click to expand...
Click to collapse
Ok kind of a noob question, but what is the wiki sorry for asking.

ROMSG said:
Ok kind of a noob question, but what is the wiki sorry for asking.
Click to expand...
Click to collapse
The wiki page is just information about the device, how to install Lineage, etc..
Preview: https://harryyoud.co.uk/lineage-previews/217514/11/devices/rs988/
hudson is the build server repo, and what order and how often to build for, like "N"ightly, or "W"eekly. Once 17.1 is official, most 16.0 goes to Weekly builds, and 17.1 goes to Nightly.

x86cpu said:
The wiki page is just information about the device, how to install Lineage, etc..
Preview: https://harryyoud.co.uk/lineage-previews/217514/11/devices/rs988/
hudson is the build server repo, and what order and how often to build for, like "N"ightly, or "W"eekly. Once 17.1 is official, most 16.0 goes to Weekly builds, and 17.1 goes to Nightly.
Click to expand...
Click to collapse
Ok Thanks so much, sorry for the Noob question I'm still learning.

i tries gapps and nikgapps and bit gapps no one is letting me go after final touch screen. even i skip setup wizard still setup wizard crashing errer popups continusly. i now removed setup wizard from twrp and started the rom...
---------- Post added at 04:56 PM ---------- Previous post was at 04:19 PM ----------
it has same bugs as romsg 17.1.
google camera processing hdr stucks at 100%
after reboot lockscreen takes 1 minute to accept password.
battery life is a bit bad
till now i saw these issues.
rest is perfect
thank u sir for this rom..

just perfect
just did a dirty flash, coming from 16.0. -->
wiped davlik and cache before, and then... everyhting went perfectly fine
all settings and apps still alive and functional.
quick check... wifi, bluethooth working fine, camera as well.
I'm very happy, thank you! :victory: :highfive:

Also i started the new oc kernel for Android 9 and 10. Hope i will release soon.
Sent from my LGE LG-H850 using XDA Labs

Tried doing a clean flash and I can't seem to get past the setup screen. When I get to the last screen where it asks to set up a few more things, when I tap finished for now, I get a FC and I can't finish the setup.
Using RS988 with opengapps 10 nano 1.24.2020 and magisk 20.3.
Steps used:
Wipe data, cache/dalvik and system
Flash LOS17
Flash Gapps
Flash Magisk
Reboot
I'll try gapps 1.23.2020 and report back.

This is a buggy setup wizard. Try to delete the setup wizard via twrp and it should boot up normally.
---------- Post added at 09:30 PM ---------- Previous post was at 09:26 PM ----------
I have no NFC. Can only turn it on via Quick settings. No menu in network settings. Turning it on in quick settings has no effect. Prior to this ROM I had Romsg's version installed. But with the same behavior. Does anybody know a solution?

djskribbles said:
Tried doing a clean flash and I can't seem to get past the setup screen. When I get to the last screen where it asks to set up a few more things, when I tap finished for now, I get a FC and I can't finish the setup.
Using RS988 with opengapps 10 nano 1.24.2020 and magisk 20.3.
Steps used:
Wipe data, cache/dalvik and system
Flash LOS17
Flash Gapps
Flash Magisk
Reboot
I'll try gapps 1.23.2020 and report back.
Click to expand...
Click to collapse
fscout42 said:
This is a buggy setup wizard. Try to delete the setup wizard via twrp and it should boot up normally.
---------- Post added at 09:30 PM ---------- Previous post was at 09:26 PM ----------
I have no NFC. Can only turn it on via Quick settings. No menu in network settings. Turning it on in quick settings has no effect. Prior to this ROM I had Romsg's version installed. But with the same behavior. Does anybody know a solution?
Click to expand...
Click to collapse
I ended up just flashing LOS16 and dirty flashing to 17.1.
Everything seems to be working except NFC and the camera seems really buggy, even after reboot. Can't save to external sd card, and recorded video can't be played. Also as mentioned above, gcam doesn't work either. Using arnovas advanced 1.7 that worked great on los16.

Roboxl said:
just did a dirty flash, coming from 16.0. -->
wiped davlik and cache before, and then... everyhting went perfectly fine
all settings and apps still alive and functional.
quick check... wifi, bluethooth working fine, camera as well.
I'm very happy, thank you! :victory: :highfive:
Click to expand...
Click to collapse
BT calls works? Or only music?
Wysłane z mojego LG-H850 przy użyciu Tapatalka

Trying out the new build on my H830 and it's good so far. I've dirty flashed from 16.0 using NikGapps core and Magisk 20.3.
I want to note some bugs along with some workarounds:
1. Camera is buggy on first boot (restarting seems to fix this)
2. Recorded videos fail to play (keep pressing play and will play eventually though audio isn't working, videos from previous versions play fine, it's possible that other camera apps don't have this)
3. Gcam not working (use urnyx05's gcam v2.1, works fine on both 9 & 10)
4. Interactive governor is maxing the CPU (gave a decent boost in battery in 16.0)
5. Powersave governor can freeze the camera when in video mode/recording (use default governor)
6. Lockscreen pin is slow on boot (just wait a little it will unlock)
7. Brightness slider still needs adjusting (Turn off autobrightness and use values between 70-90% for decent indoor screen brightness)
8. Google Play downloads can be slow regardless of GApps package and when on wifi/mobile data (Been happening to me since 15.1 and only happens to some, just pause and resume a few seconds later is the workaround I do)
9. Audio files can take a while to load when switching between audio sources like wired & wireless headphones (no workaround will began playing in a bit)

thanks a lot:victory::victory:
Sent from my LG-H830 using XDA Labs

inhave a solution delete lineagesetupprebuilt from twrp and setup will succed lineage setup is causing problem....
delete system/priv-apps/lineagesetupprebuilt...

Ismrocks1234 said:
inhave a solution delete lineagesetupprebuilt from twrp and setup will succed lineage setup is causing problem....
delete system/priv-apps/lineagesetupprebuilt...
Click to expand...
Click to collapse
You can delete every system and user app in OrangeFox recovery.
Sent from my LGE LG-H850 using XDA Labs

Database Info

welcome