Hello,
I recently try to flash my Lenovo TB-8703F under Lineage ROM.
But not my device is completly bricked and I can't power on it anymore.
When I try to flash it again under Download mode with QFLASH I get the following message :
HTML:
01:07:28: ERROR: function: rx_data:247 Error occurred while reading from COM port
01:07:28: ERROR: function: sahara_main:854 Sahara protocol error
01:07:28: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Fail:Process fail
can you help me? I just want to revive this tablet.
I've join th full log in attchment.
Thank you in advance for your help.
Ptitsnake
Related
INITIAL COMMUNIQUE:
...
"Samsung GALAXY CORE Prime"
("POWERED by android")
"metroPCS" ("t-mobile network")
"bong bong bong laa laa"
"buzz-buzz-buzz buzzzzzz"
(via usb cable to slackware--porteus variant: "Unable to open MTP device '[usb:001,013]'")
"buzz-buzz-buzz buzzzzzz"
("Unable to open MTP device '[usb:001,014]'")
"buzz-buzz-buzz buzzzzzz"
("Unable to open MTP device '[usb:001,015]'")
"buzz-buzz-buzz buzzzzzz"
("Unable to open MTP device '[usb:001,016]'")
"buzz-buzz-buzz" ...
...
System Recovery <3rd edition?> (up vol+pwr+home) appears normal for an os 5.1.1 Android.
(note: subject does not appreciate being called a "lollipop")
TRANSLATORS NOTES:
Android SM-G360T1, lmy47x.g360t1uvu1aofa, (unique s/n classified) not responding to Heimdall protocol...
Dreams of Replicant status wanning...
Suspect it (she?) is showing early stages of depression...
Z768G not so jealous now...suspect foul play ... >.> ... <.< ...
---
Heimdall output:
Code:
[email protected]:/mnt/sda3/.../prime# heimdall flash --RECOVERY /mnt/sda3/.../prime/TWRP/recovery.img --verbose
it's 3.0.2.0 i think
Code:
Heimdall v1.4.0
Copyright (c) 2010-2013, Benjamin Dobell, Glass Echidna
www glassechidna com au
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
www glassechidna com au/donate
Initialising connection...
Detecting device...
Manufacturer: "Sasmsung"
Product: "MSM8960"
length: 18
device class: 2
S/N: 0
VID:PID: 04E8:685D
bcdDevice: 0100
iMan:iProd:iSer: 1:2:0
nb confs: 1
interface[0].altsetting[0]: num endpoints = 1
Class.SubClass.Protocol: 02.02.01
endpoint[0].address: 82
max packet size: 0010
polling interval: 09
interface[1].altsetting[0]: num endpoints = 2
Class.SubClass.Protocol: 0A.00.00
endpoint[0].address: 81
max packet size: 0200
polling interval: 00
endpoint[1].address: 01
max packet size: 0200
polling interval: 00
Claiming interface...
Attempt failed. Detaching driver...
Claiming interface again...
Setting up interface...
Initialising protocol...
WARNING: Control transfer #1 failed. Result: -9
WARNING: Control transfer #2 failed. Result: -9
WARNING: Control transfer #3 failed. Result: -9
WARNING: Control transfer #4 failed. Result: -9
WARNING: Control transfer #5 failed. Result: -9
WARNING: Control transfer #6 failed. Result: -9
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet.
ERROR: Failed to send request to end PIT file transfer!
ERROR: Failed to download PIT file!
Ending session...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet.
ERROR: Failed to send end session packet!
Releasing device interface...
Re-attaching kernel driver...
[email protected]:/mnt/sda3/.../prime#
...
worth noting:
Code:
Manufacturer: "Sasmsung"
S/N: 0
Code:
ERROR: libusb...
Code:
MTP device '[usb:...
Code:
gingerbread man in spotlight...again...
...
any helpful tips for a more fruitful communication with this 'droid?
Help me out here.
Basically, my situation is like this:
Recovery: Doesn't work, when i boot to recovery an error message like this appeared:
ERROR MODE
Attention!
Please update system again
*green android guy*
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed)
Fastboot:
works, but flashing anything but openkirin's lineage os and the kernel results into this error:
FAILED (remote partition length get error)
Normal boot: goes to erecovery
i dont know what to do now, someone help me
Hello. I have been using RemixOs for a some weeks now but one day, when i was trying to boot it up, it showed this error message
error: no such device: RemixOS/kernel
error: file 'RemixOS/kernel' not found
alloc magic is broken at 0x7dfbcdao : 7df097ao.
please i need some help to get the system working again
After I attempt to flash a stock ROM through download mode on Samsung Tab E, Heimdall outputs this error when its 4% done:
Code:
Uploading SYSTEM
4%
ERROR: Failed to confirm end of file transfer sequence!
ERROR: SYSTEM upload failed!
Ending session...
ERROR: Failed to receive session end confirmation!
Releasing device interface...
Is this a problem with the storage?
Try using odin
How do i fix this in RSD lite thanks!!
ERROR: Phone[0000]: Phone did not re-enumerate after RAM-downloader was sent.
i have no clue i'm flashing stock firmware on motorola device