Database Info

[ROM][PX6][Pie][9.0] Malaysk ROM for PX6 RK3399 with only Android 9 - MTCD Software Development

Only for devices processor Rockchip PX6, MCU - MTCD, MTCE, MTXX (XX- different letter combinations ) Android 9.0 RAM 4 gb !!!
Mod Pie 9.0 Android PX6 RK3399
For Mod Pie 9.0 Android PX6 MCU STM32 RK3399 is HERE
For PX30 RK3326 mod 9 android is HERE
For PX5 RK3368 mod 9 android is HERE
Only for devices that already have 9 android from the factory !!
With firmware device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!
Everything you do - you do at your own peril and risk.
Only for those who know how to get into the recovery (different combinations of keys) !!!​
Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
Do not mix up your device !!! This is for PX6 RK3399 - MCU should start with MTCX (where X may have different letters) !!! Go to Settings-System - About the device and see your model !!!
​What is added, changed:
LITE firmware version:
Root access (only for programs that require it, the System section cannot be changed, read-only)
Added ESFileExplorer, RootExplorer, PlanetsPack live wallpapers.
One modified HCT launcher.
The ability to start screensaver and set the start time of 15-30 seconds 1-3-5-7-10 minutes is included.
By default, video viewing while driving is enabled and sound muting in Navigation is set to -3.
Changed the Music and Radio application (also made translucent)
The ability to set your logo in the Radio and Music application in Settings.
Changed the main Settings.
Reworked watches in the Status Bar with the ability to edit them - set the size, color, date.
The ability to set the viewing speed of Internet traffic in the Status Bar.
Ability to change color and gradient in the Status Bar.
Many other changes and additions.
Video LITE firmware version:
Installation: Please read carefully the instructions for installing the firmware in the archive along with the firmware.
Only for devices that already have 9 android from the factory !!​Do not mix up your device !!! This is for PX6 RK3399 - MCU should start with MTCX (where X may have different letters) !!! Go to Settings - System - About the device and see your model !!!
Download lite firmware version 1.0: https://yadi.sk/d/g08JJhJscRutSg
Mirror lite firmware version 1.0: https://mega.nz/#!04hAWaAK!lvgoqQq6WXgYSyUxPb0Q2y1OGv_DBF5j9m1Bg2YFOtU
Full firmware version:
All that is added in the lite version firmware of PLUS +:
Full root access (including the System section)
Six fully modified launchers with viewing tags of listening music (any music application), Bluetooth music and radio stations.
The ability to configure launchers (enable, disable unnecessary functions in the Settings) and the Weather settings in them and display speed via GPS.
3 types of screensavers with analog and digital clocks, with the ability to show speed by GPS, Weather, tag tags of listening music (any music application),
Bluetooth music and radio stations. Full customization of screensavers - color, font, disabling unnecessary functions, logo of your car, etc. in settings.
Change the screensaver view - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM application.
Customizable rear camera parking lines. You need to enable them in Settings - Settings related to the car - Advanced settings - Parking lines (ON)
Changed the volume panel and reduced the time of its disappearance.
Fully customizable Bar Status with the ability to enable and disable buttons and icons in it in Settings.
A reset button has been added to the Status Bar.
Screensaver, Music, Navigation, Bluetooth Music buttons have been added to the Status Bar (you can enable - disable in the settings)
Changed the function of calling the brightness panel in the Status Bar.
The screensaver now starts in all programs, in Settings there is a White List of applications where you can specify applications where the screensaver will not start.
Added the White List of Applications in Settings, where you can specify autorun after sleep.
Added equalizer ViperFX - settings can be viewed on the video
Changed the Bluetooth Music app.
Factory settings are changed for resolution 1024X600 and Russian translation is added.
Completely changed applications Music, Radio, Video.
Keyboard replaced by SwiftKey
A huge number of other additions and corrections.
Version 1.1. update was released on 04 September, 2019 for those who have the FULL version installed.
1. Gradient StatusBar fixed in Mod Settings (did not work)
2. Fixed ViperFX - did not start automatically after sleep.
3. Video files may play in the background.
4. Optimization of launchers
5. In the OEM application, 4 different types of Radio applications have been added (including Radio with support for Day and Night)
Go to the OEM application and install the application from there (there are screenshots there)
6. In the OEM application, 2 types of Music application were added.
7. Fixed icons in the Status Bar in the Launcher with support for Day and Night
8. Added analog screensaver (located in OEM application)
9. Other corrections and additions.
Who installed version 1.0 - write to me by e-mail.
Version 1.2 update was released on 11 September, 2019 for those who have the FULL version installed
1. Full root access (including the System section)
2. Android database from August 2019 (was from July)
2. Titanium Backup work
3. You can execute your scripts in a folder System/etc/Init.d
4. Split screen support (not all applications have support)
5. Added online radio PCRadio (will appear if Wipe Data is done).
6. The icons in the Status Bar have been fixed for applications that have support day and night (bluetooth, Radio, launcher).
7. pcradio, poweramp, qamp, dab-z now at startup they automatically mute the sound of regular applications
8. In the OEM application RDS display in fixed in Radio with support for day and night (translucent)
Go to the OEM application and install the application from there.
9. Added ad blocker. Located in Mod Settings – Display General - AdBloc
10. Other corrections and additions.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update 1.3.1 dated November 25, 2019.
This update is a collaboration with a respected graser from the 4PDA forum, for which many thanks to him and many thanks !!!
Who has the full firmware version 1.0, 1.1, 1.2 installed, it is strongly recommended to make full Wipe Data (check the Wipe Data checkbox, when a message appears that an update was found).
1. Support 1280X720 screen resolution
2. Four custom buttons have been added to screensavers to launch your programs.
Long press on the button - application selection.
Short press on the button - launch the application.
If you have installed the screensaver from the OEM application, you must reinstall it.
3. Fixed wallpaper selection (there was a problem that they were stretched)
4. Added Music application with support for day and night (located in the OEM application)
Warning: ViperFX will not work in Music EQ mode - disable the graphic equalizer in Music!
5. Now you can configure the MODE button to launch your applications.
It is located in the Mod Settings - Display General - Selecting applications to start by pressing the MODE button.
If it is disabled, the standard method of the MODE button is used (start Radio-Music-Video)
6. A graphic equalizer has been added to the screensaver.
7. In the OEM application, another version of the Music application has been added.
8. Added the ability to automatically adjust sound by GPS speed.
It is located in Settings Mod - Display General - GPS Auto volume control .
9 Removed pop-up messages with auto brightness via GPS.
10. Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
It is located in Mod Settings - Display General - Pop-up notifications settings for players and Radio.
11. Fixed icons in the Status bar for a dark theme.
12. The new application for the equalizer, more options for tuning the DSP.
In the OEM application there are two types of equalizers, you can set which one you like.
13. A lot of other corrections and additions.
Updating the full version of firmware 1.3.5 from December 26, 2019.
This update is a collaboration with a reputable graser (for which many thanks to him!)
1. Fixed GPS.
Improved location accuracy.
With a cold start - satellites are found in 40-70 seconds.
With a hot start (after sleep or reboot) - instantly.
2. Who had problems with USB ports or WiFi loss - fixed.
Initialization of USB and WiFi after a full system boot and after sleep.
3. A new method and settings for the white list of programs to start after sleep (located in Mod Settings - Mod Settings - System Settings)
4. New whitelist for adding third-party programs (for example Poweramp)
when launched, the sound will be muted for regular programs Music, radio, etc. (located in Mod Settings - Mod Settings - System Settings)
5. A new white list for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
6. Redone Launcher with support for day and night. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen.
- Clock, GPS speed, Weather, or choose to display your logo (download the logo on the Internet (for example, the logo of a BMW car),
in PNG format and preferably with a transparent backing and copy the file to the device’s internal memory)
If after updating the firmware, at each system boot, location permissions for the launcher are asked, go to Mod Settings - Mod Settings -
Launcher Settings - Launcher with day and night support and enable GPS speed display.
7. The new graphic equalizer in the Music and Screensaver applications, with four different graphic equalizers and color choices.
8. Reworked regular applications Radio and Music for a dark theme.
9. 12 applications of Radio and Music in three color themes Blue, Green and Red themes have been added to the OEM application.
10. You can now set the time for displaying music and radio notifications in the Mod Settings from 1 to 10 seconds.
11. EasyConnected updated to the latest version.
12. Reduced auto sound increase by GPS speed and fixed sound increase during bluetooth conversation (now does not automatically add sound)
12. Many other corrections and additions.
Online update version 1.4.5. from July 19, 2020 - https://forum.xda-developers.com/showpost.php?p=83093139&postcount=804
Important information! - https://forum.xda-developers.com/showpost.php?p=80099333&postcount=130​
Video 1.3.5:
Video FULL Version :
Who has the full versions 1.0 and 1.1 and 1.2 and 1.3.1 installed - write to me by e-mail.
Download full firmware version 1.3.5.: We first install the LITE version and carefully read the instructions in the archive along with the firmware.
Who wants to translate Settings into their native language - https://forum.xda-developers.com/showpost.php?p=80203260&postcount=88
In the process of filling !!!​

reserve

@Malaysk, I'm trying to install the recovery image on my Dasaita Max6 with android 9 but the mod installer apk only takes me to a black screen, any ideas why its happening. (by the way, can you provide us with the factory recovery image in case we want to go back to original factory state.?)

Al Ferro said:
@Malaysk, I'm trying to install the recovery image on my Dasaita Max6 with android 9 but the mod installer apk only takes me to a black screen, any ideas why its happening. (by the way, can you provide us with the factory recovery image in case we want to go back to original factory state.?)
Click to expand...
Click to collapse
Hi, can you post screenshots of Settings-System-About the device?

Malaysk said:
Hi, can you post screenshots of Settings-System-About the device?
Click to expand...
Click to collapse
Here you go. (I'm using hct4 MX ROM because it has split screen feature, Dasaita ROM doesn't provide split screen)

If added Picture-in-Picture (PiP) function it will be perfect!
And please recommend If need back to the original stock rom how to do?

Al Ferro said:
Here you go. (I'm using hct4 MX ROM because it has split screen feature, Dasaita ROM doesn't provide split screen)
Click to expand...
Click to collapse
Hmm ... very strange. Everything seems to fit. On two devices, I'm fine. And several people have already installed - everything is fine too. I don’t understand why you have a black screen. Does the device boot? Works? I will once again check the installation on my devices.

Al Ferro said:
Here you go. (I'm using hct4 MX ROM because it has split screen feature, Dasaita ROM doesn't provide split screen)
Click to expand...
Click to collapse
can you send me the factory firmware that is installed with you? I will check.

Malaysk said:
Hmm ... very strange. Everything seems to fit. On two devices, I'm fine. And several people have already installed - everything is fine too. I don’t understand why you have a black screen. Does the device boot? Works? I will once again check the installation on my devices.
Click to expand...
Click to collapse
The screen remains black but I reboot using the reset button and I can go back to android . I experienced the same situation before on my PX5 Oreo unit using halk9 recovery installer, I was able to install it once, but I removed it and then later I tried again to install it but nothing happened, no more.

watchdog69 said:
And please recommend If need back to the original stock rom how to do?
Click to expand...
Click to collapse
Record from the factory firmware Update.zip and insert into the USB. A menu pops up asking you to install the firmware. Check the Wipe Data box and agree. Everything. You are returned to the factory firmware.

Malaysk said:
can you send me the factory firmware that is installed with you? I will check.
Click to expand...
Click to collapse
I got the px6 MX android 9 firmware from here https://yadi.sk/d/umCvHqCDzHccr

Al Ferro said:
I got the px6 MX android 9 firmware from here https://yadi.sk/d/umCvHqCDzHccr
Click to expand...
Click to collapse
Well, I will install it on my device and check the installation of my firmware on it.
Can you now get into recovery with the key or RESET combination?

Malaysk said:
Well, I will install it on my device and check the installation of my firmware on it.
Can you now get into recovery with the key or RESET combination?
Click to expand...
Click to collapse
Yes I can, using the reset button.

Al Ferro said:
I got the px6 MX android 9 firmware from here https://yadi.sk/d/umCvHqCDzHccr
Click to expand...
Click to collapse
I installed your firmware and checked .... watch the video ... everything is fine

Malaysk said:
I installed your firmware and checked .... watch the video ... everything is fine
https://youtu.be/T_Tg1KFKqDs
Click to expand...
Click to collapse
Yes, that is exactly how it is supposed to work , but my radio unit won't display the recovery menu after clicking on the install button, it only displays a dark screen with the panel lights lit. I noticed on your video that the installer apk is named: RecoveryInstaller_PX6.apk, and the one that I have it only says: RecoveryInstaller.apk, if it makes any difference. I did not mentioned before that I have the head unit rooted.

Al Ferro said:
Yes, that is exactly how it is supposed to work , but my radio unit won't display the recovery menu after clicking on the install button, it only displays a dark screen with the panel lights lit. I noticed on your video that the installer apk is named: RecoveryInstaller_PX6.apk, and the one that I have it only says: RecoveryInstaller.apk, if it makes any difference. I did not mentioned before that I have the head unit rooted.
Click to expand...
Click to collapse
I don’t understand anything
What archive did you download my firmware? What is it called?
PS : How did you manage to get root access on the PX6 9 android factory firmware???

Malaysk said:
I don’t understand anything
What archive did you download my firmware? What is it called?
PS : How did you manage to get root access on the PX6 9 android factory firmware???
Click to expand...
Click to collapse
I see what's going on, some how I ended up having a wrong installer apk. Now I unpacked the rar archive and I got the RecoveryInstaller_PX6.apk (I haven't tested it yet), Man, I don't know how it happened. Getting root access was easy through wi-fi adb commands, you know the usual way (is it really rooted? System still is read only, but with help from es file explorer we are able to mount as read-write to modify) . Will you implement split screen in your mod firmware? Thanks for everything:good:

I installed the ROM on my new device I received yesterday. Works fine - great work, thanks.
Is there a possibility to get full root access - write on system? Maybe you can add an option?
Are all further updates included in the Full Version?

Dear Malaysk
The PX6 Android9 can install Garmin street pilot in stock ROM but while open app it show error 1-2 sec. as picture after that can run normal.
I think the error may from the system permission. If you put this App to your MOD Rom then correction error will be perfect!
If you need the apk. and Garmin folder I will be send Link to you at PM

Herr der Klinge said:
I installed the ROM on my new device I received yesterday. Works fine - great work, thanks.
Is there a possibility to get full root access - write on system? Maybe you can add an option?
Are all further updates included in the Full Version?
Click to expand...
Click to collapse
I am working on full root access. So far, the system is read-only.
Yes, all updates are included in the full version.
watchdog69 said:
Dear Malaysk
The PX6 Android9 can install Garmin street pilot in stock ROM but while open app it show error 1-2 sec. as picture after that can run normal.
I think the error may from the system permission. If you put this App to your MOD Rom then correction error will be perfect!
If you need the apk. and Garmin folder I will be send Link to you at PM
Click to expand...
Click to collapse
Send me the program in private messages (there is no need to upload it here) I will check and see.

Related

Only for PX3 MTCD-MTCE Android 7.1.2 !!!​Only for those who know how to get into the recovery (different combinations of keys)​How to find out if this firmware is suitable for your device - go to Settings - About the device -we look at the screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Version 1.0 of October 23, 2017.
Built-in Root latest SuperSU (hidden root access).
Built-in Xposed
Added support for Init.d
Signature verification is disabled.
Added Launcher I modified (see screenshots)
Added programs - Root Explorer, ES File Explorer.
New item in Settings - Custom settings (here all new added items are located)
Added reboot and reboot button in the recovery in StatusBar
Speed ​​of outgoing and incoming Internet in the status bar
The standard sound control is redone
Redesigned graphic design of pop-up messages.
Added module for Xposed - Disable Fullscreen Keyboard - http: //repo.xposed.inf...ablefullscreenkeyboard
You can completely customize the icons in StatusBar. Are in Settings - User settings - Hide - Show icons in the Status Bar and there turn on or off, then what you need.
Screensaver with the function of speed by GPS and Weather.
Module Xposed to display the speed of the GPS in the screensaver - gps-mtc-launcher.
In the archive, along with the firmware, there is a folder called mtc-launcher, it must be copied to the root of the internal memory card (SDCARD) using ES File Explorer. And you must activate the GPS Mtc Launcher module in Xposed !!!!
In the folder Copy_To_internal_sd (SDCARD) - From MPH - to display the speed in MPH (US and others)
In the folder Copy_To_internal_sd (SDCARD) - From KM - to display the speed in KM / H (Russia, Europe and others)
The weather settings in the screensaver and Launcher are adjusted in Settings - User settings - Weather on the screen. There you can turn on - turn off the weather display. Do not forget to enable Settings - Location - By all sources (WiFi and GPS)
Added different time values ​​for running the screensaver in Settings - Screen - Time to start the screensaver Never-15-30-60 seconds-2-3-5-7-10 minutes.
A lot of everything.
Install with full data cleaning - Wipe Data (check the box, look at the screenshot) The first download will be very long, about 15 minutes.
View attachment 4311807​Download: https://yadi.sk/d/481WJ8kr3P2Gau
Version 2.1 of November 21, 2017.
Made on the basis of the android firmware from October 26, 2017
Video setup instructions - https://www.youtube.com/watch?v=hynq280YYRU
Download: https://yadi.sk/d/E2_Kt-pz3PtTuZ
The first download after the firmware will be very long 15-20 minutes and the device can reboot several times!!!
New from February 16, 2018, Firmware № 3.0
Video instruction on setting up the system (though the video was shot on 6.0.1 PX5 system) - https://www.youtube.com/watch?v=YD31zLeNrXc
1. The firmware was made on the basis of the firmware from February 8, 2018.
2. Fixed Radio schedule (in my Modified Radio) for 800X480 screen resolution. (for testing thanks to Glyckmen) and in the screensaver the Music button.
3. Added screen lock function for PIN code. Enable - Disable in Settings - Custom Settings - Lock screen. The screen lock will occur when the device is fully loaded and when it exits from sleep.
Especially the necessary function, if you leave the car in a car service
4. Updated Xposed to the latest version.
5. Updated Root access (SuperSU) to the latest version.
6. The module for Xposed mtc-launcher is deleted, see below why (duplicate function)
7. Added module for Xposed MVG-V70 (thanks to him for helping me adapt the module for my firmware) xposed-mtce-utils. You can see its settings here - https://forum.xda-developers.com/showpost.php?p=74267480&postcount=2
In the archive, along with the firmware, there are two folders
Copy_To_internal_sd (SDCARD) - From MPH - to display the speed of the GPS in the screensaver in MPH - America, etc.
Copy_To_internal_sd (SDCARD) - From KM - to display the GPS speed in the screensaver in KM/H - Russia, Europe, etc.
It is necessary to copy the entire folder mtce-utils to the root of the internal (sdcard) memory and activate the module in Xposed !!!!
Pay attention to the item:
Code:
# packages of white list applications that are not killed when the device goes to sleep.
[mtce.whitelist]
8. Running Viper after sleep, do not forget to turn off the "jumper" in the staff player, with them the Viper does not work. Settings for Music - https://forum.xda-developers.com/showpost.php?p=75596992&postcount=660
9. The sound adjustment panel has been reworked.
10. Added three launchers to the OEM application in the Other Launchers folder
11. Redesigned application bluetooth.
12. Many things can be installed in the OEM application.
13. Much more
I recommend (at your discretion) do Wipe Data.
If you are installing the firmware from Wipe Data, then the first download will be a long 10-15 minutes!
Download Firmware 3.0: https://yadi.sk/d/KBYwFAnZ3SU7Tc
New from February 20, 2018, Firmware № 3.1
Video instruction on setting up the system (though the video was shot on 6.0.1 PX5 system) - https://www.youtube.com/watch?v=YD31zLeNrXc
1. Fixed the lock screen (number "0") and a little altered.
2. Added to Settings - Custom Settings - For Developers
3. Added to Settings - User Preferences - Clock settings in the status bar. And the clock and date are made in the middle.
To make the clock visible you need to go to the section Select the color of the clock and date and set its color.
4. Redesigned Screensaver. Also new and old versions are in the OEM application in the folder ModApk - ScreenClock
5. Also in the OEM application is added to Live wallpeper folder with 4 full versions of Live wallpaper. When you install them, then select them on the Desktop
you can in Settings - Screen - Wallpapers - Live Wallpaper.
6. The version of Music in a transparent style is added to the OEM application. Located in ModApk folder - Malaysk Mod - MtcMusic4_Transparent (2 versions - with and without panel)
7. Fixed launching PCRadio.
If you are installing the firmware from Wipe Data, then the first download will be a long 10-15 minutes!
Download Firmware 3.1: https://yadi.sk/d/m-9qQV6t3ScVDL
New from 05 June 2018, Firmware No. 4.0
+ The firmware is made on the basis of the factory firmware from 04/26/2018.
+ The new PCRadio mod from Duk (transparent, with a power button)
+ Updated the module for Xposed from MVG-V70 (4pda) xposed-mtce-utils (thanks to the eum for adapting it for soya firmware)
+ Added a module for Xposed from graser (4pda) dasaita-xposed (thanks to him for the module)
+ Multiple fixes and additions to the firmware
+ Redesigned bluetooth application with the panel and without it (found in the OEM application)
+ Added a new version of the screensaver with the choice of a graphic equalizer (Right bottom button)
Change screen from analog clock to digital - click on the screensaver for 3-4 seconds.
+ Added to Music application button for selecting graphic equalizer - VIS button
+ New version of ViperFX
+ New version of EasyConnected (located in the OEM application in the app folder)
+ another ....
All mod. applications are in the OEM application
If you lose the clock in the status bar, then you need to go to Settings - User Settings - Clock settings in the status bar and there to specify any color of the clock.
Do not forget to copy the folder mtce-utils (is in the archive together with the firmware) after installing the firmware on the internal memory card (sdcard) and activate all modules in Xposed.
I strongly recommend installing the firmware with full data cleaning (Wipe Data), because Many files have been moved and may not work properly after a regular update.
The correct operation of the built-in modules for Xposed is possible only on my mod applications Radio, Music, Bluetooth, Screensaver. All of them are in the OEM application in the ModApk/ 1 Malaysk MOD folder and in the ScreenClock Malaysk folder.
Download Firmware 4.0: https://yadi.sk/d/o5xGdE6p3X9vqT
New from 11 June 2018, Firmware No. 4.1
Who installed the firmware No.4.0, then you can install it with a simple update, without deleting the data (but if you updated it to the manual module xposed-mtce-utils, before you install the update, go to Settings - Programs - xposed-mtce-utils, click on three vertical dots in right upper corner and delete the Update module), for all others I recommend installing with full data cleaning (Wipe Data).
+ Two screensavers MTCScreenClock_No_Transparent and MTCScreenClock_Transparent (found in the OEM application) are redone - a graphic equalizer is added (choice is the upper right button) and a temperature display is added from the canbas (I need to check, I do not have such in the device)
+ Corrected sound controller
+ New converted widgets.
+ Other
Download Firmware 4.1: https://yadi.sk/d/RPvx0Dv43Xm2e3
New from 11 December 2018, Firmware No. 5.0
I strongly recommend installing the firmware in a clean, with the removal of all data (Wipe Data)!
The first download after the firmware will be very long 10-15 minutes, then the device will reboot - this is normal!
Android base - factory firmware from November 11, 2018.
Added support for online updates.
Practically different from previous firmware by 80 percent.
Do not forget to copy the mtce-utils folder to the root of the internal memory and activate all the modules Xposed!
Firmware setting video - https://www.youtube.com/watch?v=3XJ6x5PbtlM
Download Firmware 5.0: https://yadi.sk/d/XYpCdgjydCp8Cw
Mirror Firmware 5.0: https://mega.nz/#!wgRXjQzJ!8gLrfjHb_5mNGrW5I8yOXoJcWTvuIP8nlNU3S27Vn9w
Big request to support the project! I need to pay for a server for online updates! Who is not indifferent and likes my firmware and so that the project can be developed HERE
Released online firmware update 5.2.
1. Fixed the operation of the Navigation and MODE buttons.
2. YahooWeather provider removed (Since January 3, 2019, access to this weather provider has been terminated) Only OpenWeather has been left.
3. You can customize the Launcher New Style in Settings - Custom Settings - Launcher Settings.
4. Added Greek, Romanian, Turkish languages ​​to User settings.
5. Added Russian language in the factory settings.
6. Now fully customizable screensaver. You can set any image on the background, make a gradient.
Remove add elements in the screensaver. Make any color and transparency of the text in the screensaver. Settings are in Settings - Custom Settings - Screensaver Settings.
So far it works only in one screensaver, which is located in the OEM application, in the ScreenClock Malay folder - MTCScreenClock_2_Digital_Clock_STYLE_KMH and MTCScreenClock_2_Digital_Clock_STYLE_MPH.
In the next firmware upgrade, this will work on all screensavers.
7. Other updates and additions.
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"

Module settings xposed-mtce-utils for Xposed​How to find out the name of the package, the program you want to add in the settings.ini from the xposed-mtce-utils module for Xposed to add to the white list after sleep or to not start the screensaver when the program is started?
It's very simple, download the program QuickShortcutMaker - View attachment QuickShortcutMaker.apk , run it and look at the names of the packages and enter them in settings.ini in the place you need.
Author: MVG-V70
Capabilities:
- White list of applications that do not turn off when the recorder goes to sleep;
- correction of messages mute on / off for old firmware;
- a strip of volume control at the bottom of the screen;
- Hiding icons in the status bar;
- adjustment of the application carousel (switched by the mode button);
- display the name of the radio station in the field for RDS information;
- pop-up messages when switching radio station switching;
- setting the staff player to pause for an incoming / outgoing call;
- pop-up messages when switching tracks in a regular player;
- reassignment of buttons on the front panel of a radio tape recorder;
- change the name of the OBD device;
- display the name of the radio station on the modified widget;
- showing the name of the radio station and the tags of the music tracks in the modified screensaver;
- display teeperators (from canbus) in the modified screensaver;
- Sorting the phone book by Cyrillic characters;
- Speed ​​dialing for a long press of a numeric button.
All settings are in the file in internal memory /sdcard/mtce-utils/settings.ini
Example settings.ini
# hide the volume, brightness and disk eject button false-hide, true-do nothing
[systemui.icons.status]
volume=false
eject=false
screenbrightness=false
# packages of white list applications that are not killed when the device goes to sleep.
[mtce.whitelist]
info.mapcam.droid
org.adaway
com.audlabs.viperfx
com.maxmpz.audioplayer
com.kunkunnapps.os8.keypad
# basic settings
[mtce.settings]
# If the radio is not in the talk mode, you can use the end key as "back"
hangup_as_back=true
# The level of safe volume installed before turning off and back on the radio
volume.safe=10
# Alternative mode for switching packets using the mode button
mode=true
# Alternative screensaver mode: true-enable, false-turn off
screenclock=true
# the names of OBD devices, separated by commas
# If there is no line with the device name, a function is called from the firmware
obd_device=OBD,SPP-DUAL
# GPS time synchronization at power on
sync_gps_time=true
# packages that are switched to the carousel (button MODE)
# in the example of Radio, Music and Video
[mtce.mode]
com.microntek.radio
com.microntek.music
com.microntek.media
# increase the volume depending on the speed
[mtce.speed.volume]
# true-enable, false-off
enable=false
# speed thresholds at which the volume will be increased
speed.volume=40,80,100,120,150
# Increment speed increase, default 1
volume.delta=1
# list of application-exceptions, in which the screensaver will not start:
# in the example of Yandex-maps and navigator and the regular player
[screenclock.exceptions]
com.microntek.media
ru.yandex.yandexmaps
ru.yandex.yandexnavi
com.navitel
# Radio settings
[radio.settings]
# show pop-up messages: true-enable, false-disable, default false
toast=true
# font size of pop-up messages, 24-increased
toastSize=24
# show the name of the radio station in the field for RDS information when RDS is off
# the name of the radio station is taken from the corresponding button.
names=true
# sending information for the modified staff widget
widget=true
# settings of the standard modified widget
[widget.settings]
# show information with the name of the radio station
radio=true
# name of the field with the name of the radio station
radio.name=txt_StationName
# settings of the staff player
[music.settings]
# Alternative cover if the standard does not work. Default is false
cover.alt=true
# pause after a call. false by default
play_after_call=true
# show popup messages when changing a track, default is false
toast=true
# font size of pop-up messages, 24-increased
toast.size=24
# format of the pop-up message, you can use %title%, %album%, %artist%, %filename%
toast.format=%artist% - %title% - %album%
# Bluetooth settings
[bluetooth.settings]
# sorting in the beginning by Cyrillic characters, default is true
sort=true
[bluetooth.quickdial]
# number per button (3) (Long press button 3 in the Bluetooth application)
3=+11111234567
[android.microntek.service#keys]
; dvd -> yandexmaps
app_296=ru.yandex.yandexmaps
[com.microntek.music#keys]
; mute -> pause
event_258=257
Click to expand...
Click to collapse

Awsome!
I have a px3 with Android 7.1.2, but only 1gb ram.
Can i flash this rom?

michiil said:
Awsome!
I have a px3 with Android 7.1.2, but only 1gb ram.
Can i flash this rom?
Click to expand...
Click to collapse
Take photos of the whole section Settings - About the device
Have you updated the firmware for Android 7.1.2 and what is yours MCU?

Malaysk said:
Take photos of the whole section Settings - About the device
Have you updated the firmware for Android 7.1.2 and what is yours MCU?
Click to expand...
Click to collapse
Hope you can read it..
I did not update the unit, it came with 7.1.2 preinstalled.
Mcu is: MTCD_XRC_V2.58_1

ohh nice, this is what i'm waiting for. THX malaysk

I just saw this over on the RU forum, super excited to dig in, thanks so much for all your work!

michiil said:
Hope you can read it..
I did not update the unit, it came with 7.1.2 preinstalled.
Mcu is: MTCD_XRC_V2.58_1
Click to expand...
Click to collapse
I think that this firmware is right for you, it's really strange why you have 1 GB of memory

I'm running an Eonon px3 model (GA8163.) I'll try to get this installed tomorow.
I'm hoping that it:
Runs slightly faster.
Audio stops muting for 1 second randomly.
Stock equalizer properly delivers mid and low range bass. (Looks like the same stock app.... I currently have to load a bass booster app every time to correct it.)

Malaysk said:
I think that this firmware is right for you, it's really strange why you have 1 GB of memory
Click to expand...
Click to collapse
Would it be hard to get back if it doesnt work?
I don't want do have a brick aferwards...

Greetings from Canada
I'm looking very forward to this with my Eonon GA8163 for Mazda 3 2011.
The wifi is pretty slow, system is also getting slower.. although I haven't done much.
I would also like the bluetooth to accept connections from other devices such as a keyboard, game pad or anything else.
Never flashed a Android before. I wonder if it could fix any of those issues.

Hello Malaysk,
first thank you for your work.
I have a few questions:
-Is the "Shutdown when ACC off" function integrated ? (Auto Sleep, 30 Sek., 5 Min., ...)
-Is the "Widget-Problem" fixt ? No function after cold reboot?
-FM-Station-Names can be stored permanently?
-Runs the TASKER-App automatically after cold reboot, when installed?
Thanks in advance
Papa-Shango

Wow!!
Malaysk, getting into recovery is not needed, right? We can just extract rar, place the nupdate.img on a USB or SD card and flash from settings, right? Did you mean that we should know how to get into recovery if something goes wrong?
Cheers,
Rahul U S

Awesome. Thanks for your time/effort Malaysk :highfive:
This looks to be just what I need for my Xtrons PA77AA3P
Now just need to wait for download to become available again...

Nice work bro!

ROM installs OK for me on an Xtrons PA77AA3P unit.
Not had a chance to play really as it is late right now...
A few notes from me as I have not used any android device for the last few years:
I just connected the media and got an autorun prompt and proceeded as per the screenshot
It will take about 30 mins or so to complete the update process, after install/erase the unit will sit on logo screen for ages...
I think DAB+ app is missing but have seen some posts about an improved patched version somewhere on here...
Need to have a proper look/play tomorrow...

s.rahus said:
Malaysk, getting into recovery is not needed, right?
Click to expand...
Click to collapse
I cannot set my device into recovery, too (holding reset for some seconds just resets the unit). Anyways having a recovery option would be fine if anything goes wrong.

I am hoping by Thursday I will be able to test it on my XRC (Hizpo branded) and possibly my GFs WWW (Eonon Branded).

I flashed this on my XRC unit with NO issues. Fantastic! Will play with it more.
@Malaysk, Can you add an option to auto hide the status bar/notification bar? We should be able to unhide the status bar by swiping down from top or using the back buttom.
kabelgleichung said:
I cannot set my device into recovery, too (holding reset for some seconds just resets the unit). Anyways having a recovery option would be fine if anything goes wrong.
Click to expand...
Click to collapse
While the device is on, press and hold on to the power button for about 15-20 seconds or more until it reboots. It may reboot into recovery mode now. Please try and see if this works for you (assuming that you have physical power button)
twist said:
I am hoping by Thursday I will be able to test it on my XRC (Hizpo branded) and possibly my GFs WWW (Eonon Branded).
Click to expand...
Click to collapse
Just flashed without any issues on my XRC unit.
Thanks,
Rahul U S

Hello again,
can someone who installed the rom check this functions, please?
Many Thanks !
Papa-Shango
Papa-Shango said:
Hello Malaysk,
first thank you for your work.
I have a few questions:
-Is the "Shutdown when ACC off" function integrated ? (Auto Sleep, 30 Sek., 5 Min., ...)
-Is the "Widget-Problem" fixt ? No function after cold reboot?
-FM-Station-Names can be stored permanently?
-Runs the TASKER-App automatically after cold reboot, when installed?
Thanks in advance
Papa-Shango
Click to expand...
Click to collapse

Only for devices processor Rockchip PX5, MCU - MTCD, MTCE Android 6.0.1 and 8.0 RAM 2-4 gb !!!​Mod 9.0 Android Pie for PX5 - https://forum.xda-developers.com/an...malaysk-rom-px5-2-4-gb-android-6-8-9-t3955343​FOR PX30 - https://forum.xda-developers.com/showpost.php?p=79234731&postcount=6​
With firmware device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!
Everything you do - you do at your own peril and risk.​
Only for those who know how to get into the recovery (different combinations of keys) and installed in the device SD card slot !!!​
Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
Restoring killed (brick) on the device after unsuccessful flashing - https://forum.xda-developers.com/showpost.php?p=75664396&postcount=3254
​Built-in Root access, latest SuperSU.
Built-in latest version Xposed.If you write at the first start Xposed - it is installed, but not activated - we exit and reboot the device, then everything will be fine. And do not forget to activate all modules in it!
Signature verification app is disabled.
Added programs - Root Explorer, ES File Explorer.
New item in Settings - Display - Custom settings (here all new added items are located)
1. Lock screen (function for PIN code access)
2. Display Weather ( Show the weather in the screensaver and launcher LM )
3. Hide - Show icons in the Status Bar ( here you can turn on - turn off the buttons in the Status Bar - Back, Home, Moon (launch of the screensaver), Volume, Screen brightness icon)
4. Clock settings in the status bar
4.1 date
4.2 date position
4.3 date Format
4.4 Font
4.5 StatusBar clock color
4.6 Font size
To make the clock visible you need to go to the section StatusBar clock color and set its color.
5. Network traffic ( showing the speed of Internet traffic in the status bar )
6. Gradient StatusBar ( You can make a transparent StatusBar there or add any color.)
7. Developer options
8. Adblock ( blocking the display of ads from the Internet in the browser )
9. Managing startup ( only for advanced users!)
Added reboot and reboot button in the recovery in StatusBar
All the most important and additional applications are in the OEM application
1. HCT_app_gold (factory applications from the firmware HA from March 03, 2018
2. Launchers ( Launcher KGL , JY, HCT, HCT New )
3. Live wallpaper ( Bubbles, Firefly Jungle, Marine Aquarium , Planets )
4. Malaysk Mod
4.1 MTCMovie4_no_panel
4.2 MTCMusic4_no_panel
4.3 MTCMusic4_panel
4.4 MTCMusic4_transparent_no_panel
4.5 MTCMusic4_transparent_panel
4.6 MTCRadio4_no_panel
4.7 MTCRadio4_panel
5. Other Launchers
6. ScreenClock Malaysk
6.1 MTCScreenClock_NEW
6.2 MTCScreenClock_OLD
6.3 MTCScreenClock_Visualizator
Versions of the screensaver 2 in 1. With a long press on it, the screen changes from analog clock to digital.
7. app ( DAB+ , Total Commander , Torque )
The standard sound control is redone
Redesigned graphic design of pop-up messages.
Added module for Xposed - Disable Fullscreen Keyboard - http://repo.xposed.info/module/com.shubhangrathore.xposed.disablefullscreenkeyboard
Screensaver with the function of speed by GPS and Weather.
Added three default launchers - Launcher3 (Gold HA), Launcher KGL (will be the first time you run the firmware), Launcher LM ( with the weather )
Change launcher - Settings - Display - Default apps - Home app.
Added different time values ​​for launching the screensaver in Settings - Screen - Time to start the screensaver - Never-15-30-60 seconds-2-3-5-7-10 minutes.
Added internet radio - PCRadio , if you activate the module in Xposed PCRadio, then the information will be displayed in the screensaver.
Added module for Xposed MVG-V70 (thanks to him for helping me adapt the module for my firmware) xposed-mtce-utils. You can see its settings here - https://forum.xda-developers.com/showpost.php?p=72103289&postcount=2
In the archive, along with the firmware, there are two folders
Copy_To_internal_sd (SDCARD) - From MPH - to display the speed of the GPS in the screensaver in MPH - America, etc.
Copy_To_internal_sd (SDCARD) - From KM - to display the speed by GPS in the screensaver in KM / H - Russia, Europe, etc.
It is necessary to copy the entire folder mtce-utils to the root of the internal (sdcard) memory and activate the module in Xposed !!!!
ViperFX is installed in the system.
ViperFx was added to the MTCManager.apk to work after sleep.
Updated all mod applications - Music, Video, Radio. - You need to go into the OEM application and reinstall the applications from the folder - Malaysk MOD
Added to the modified applications button FX - for start ViperFX .
Added multi-window support to these applications.
Other.
Video Configuring firmware version 3.2 android 8.0 MTCE MTCD: https://youtu.be/3XJ6x5PbtlM
Before installing the firmware, try to get into recovery with hardware buttons and move in it on the menu (Briefly press Power button (or the RESET, or button BACK) Apply - long press on Power button (or the RESET, or button BACK). !!!​
Installation:
Who has already installed Android 8:
1. Download the apk file from here - https://forum.xda-developers.com/showpost.php?p=78429554&postcount=2517
2. Download the latest version of my firmware, unzip it, copy the update.zip file to a USB flash drive (formatted to FAT32)
3. Install the apk on the device
4. Connect the USB flash to the device (click Cancel on Firmware update window)
5. Run the Istallrecovery application and click Install
6. Automatically get into the Recovery.
7. Select Apply update system
8. In the next screen, select From usb storage.
9.After installing the firmware, we do it in Recovery - Wipe Data
If you have Android 6 installed:
There are instructions in the archive of the firmware version 3.5
Version 3.2 from December 01, 2018
The archive added information on the firmware in English and Russian.
Who is version 1.0 or 1.1 or 2.0 or 3.0- write the update.zip file to the SD card or USB flash drive - go into the recovery and update the firmware. I strongly recommend that after installation immediately in Recovery do Wipe Data (lose all your installed applications) !!
Later I will add all the information to the first page of the forum.
If after installing the firmware after the download, an error appears Xposed install - just go to the Xposed install application and exit from there.
1. The firmware is made on the basis of the factory firmware from October 11, 2018 year.
2. Removed two Chinese keyboards and cleaned the Chinese.
3. There are 3 different launchers installed by me in the firmware. Change Themes in Settings - Display General - Display Extra - Theme.
4. The default time zone is +3 GMT
5. By default, video viewing is enabled in Settings. By default, the mode is turned off when a regular music player starts automatically when a USB flash drive or SD card is connected.
6. In Settings - Display - Time to start the screensaver screensaver start time has been added Never - 15s-30s-60s-2m-3m-5m-7m-10m (By default, the download is set to 7 minutes) The screensaver is launched only in regular applications.
7. Redone regular screensaver. Added GPS speed (by default in kilometers) and buttons for quick access to regular applications. Also show tracks from a regular music player. If someone needs speed in Miles, then the screensaver can be changed in the OEM application in the ScreenClock Malay folder.
8. Added to Settings - Display - Auto screen brightness at sunset and dawn.
9. Redesigned staff application Music with the top panel. An EQ button has been added to the application to launch the equalizer setting and the VIS button to select a graphic equalizer (7 types). When you click on the weather, the screensaver starts.
10. The standard Radio application has been reworked (2 versions - with the top panel and the second version - without the top panel, located in the OEM application in the Malaysk MOD folder. The EQ button has been added to the application to launch the equalizer setting. When you click on the Weather, the Screensaver starts.
11. Redone staff application for Bluetooth. When you call the panel is also translucent.
12. The standard sound of the incoming call is changed and its sound is reduced.
13. Added application for Internet radio - PCRADIO.
14. Weather Settings in Launcher and Screensaver are located in Settings - Display General - Weather overlay
15. Changed regular volume control. Made in AV style and shown below.
16. Reworked regular widgets in the launcher. Made bigger and translucent.
17. In the Status Bar increased hours. And made a translucent status bar in the staff launcher. (will be visible when Live Wallpaper is installed)
18. Added support for OTA updates (via the Internet), for further corrections and additions.
19. If you sync with contacts from your Google account, you can call from the standard Contacts application.
20. Changed the method of calling the brightness panel from the button in the Status Bar.
21. Updated Viber FX.
22. Switching the view in the Screensaver - a long tap in the center of the screensaver (3-5 seconds). The view will change. There are also many other types of me converted in the OEM application.
23. Many other additions and corrections, a very long time to write, because Factory firmware is almost completely changed - you can watch the video - https://www.youtube.com/watch?v=GSD4UobdexU
Do not forget to activate the modules in Xposed Install, copy the folder mtce-utils to the root of the internal memory (Sdcard) and reboot.
Video Configuring firmware version 3.2 android 8.0 MTCE MTCD: https://youtu.be/3XJ6x5PbtlM
Configuring Dark Launcher on firmware version 3.1.1 :https://youtu.be/JL_GGKbvh_s
Download 3.2 December 01, 2018: https://yadi.sk/d/6d0FikHheuRrUA
Mirror https://mega.nz/#!d151kKwC!A25UmqjLUzgPhXsAZw3D2Ew4IZcNHR0zzjuBAOjywcs
Online update 3.1 released.
1. Added support for receiver 800X480 (it is necessary to check, everything was done blindly, I do not have such a device with the screen resolution)
2. New LOGO when you start the device.
3. New settings - Customize the view launcher. Located in Settings Mod - Display General - Launcher settings
4. New settings - View hours and dates in the Status Bar. Located in Settings Mod - Display General - Clock settings in status bar.
5. In the Dark launcher, GPS speed has been added (can be disabled in Settings)
6. Fixed sound panel when turning on the MTCE-Utils module.
7. MtcDialer now visible in programs.
8. Added color setting for weather
9. A huge number of corrections and additions.
The server will be available from 9-00 to 22-00 on MCK.
Download new updated settings 02.12.2018 for MTC-Utils - https://yadi.sk/d/rzA41dZGQ_xk7Q Copy the folder with the replacement in the root of the internal memory (in the ES File Explorer, it is displayed as SDCARD)
Released online update 3.1.2 (133 MB) 25.11.2018
1. In OEM application added new versions of DAB + 180618 and EasyConnected (remove previous versions of DAB and EasyConnected before installation)
In the OEM application are in the app folder.
2. In OEM application, native factory applications from the HCT firmware have been added. Radio, EQ, Widgets, Launcher, Video, Bluetooth, BTMusic. Located in the folder Factory app HCT.
3. Fixed applications for resolution 800X480 ( need to check who has such a device !!!)
4. Fixed the launcher Mal GPS Panel and added the display of tracks from regular Music and RDS Radio. You can configure in the MOD-Display General Settings - Launcher Settings.
5. In the MOD-Display General Settings - Hide - Show icons in Status Bar - added to disable the display of temperature in the Status Bar.
6. Many other fixes and additions.
Released online update 3.2.1 (51 MB) 12/13/2018
1. All screensavers in the OEM application are updated (if you have installed a screensaver from there, then you need to update it again by installing from the OEM application)
2. Added support for Init.d
3. Launcher Launcher NewStyle fixed
4. Added item for Online updates in Settings Mod.
5. By numerous requests added support scripts from b-max - http://4pda.ru/forum/index.php?showtopic=883219&st=9420#entry79441007 (check is necessary, I didn’t really need it )
6. Many other fixes and additions.
Released online firmware update 3.3 from February 1, 2019 (42 mb)
1. YahooWeather provider removed (Since January 3, 2019, access to this weather provider has been terminated) Only OpenWeather has been left.
2. You can customize the Launcher New Style in Settings Mod- Display General - Launcher Settings.
3. Added Greek, Romanian, Turkish languages ​​to settings mod.
4. Now fully customizable screensaver. You can set any image on the background, make a gradient.
Remove add elements in the screensaver. Make any color and transparency of the text in the screensaver. Settings are in Settings Mod- Display General - Screensaver Settings.
So far it works which is located in the OEM application, in the ScreenClock Malay folder. Who installed the screensaver earlier, you need to reinstall from the OEM application. Do not forget - change the clock screen - press in the middle of the screensaver with your finger for a few seconds.
5. Other updates and additions.
Released online firmware update 3.4 from 5th of April, 2019 (36 mb)
Video 3.4 - https://www.youtube.com/watch?v=DmkIisLg4W8
Video ViperFX settings - https://www.youtube.com/watch?v=dp6nSWIJwPg
Added 4 themes of all regular applications, Radio, Music, Video, Bluetooth music in red, green, blue and regular (default) colors. You can change themes in the OEM application in the Malay Mod folder.
Added the ability to set your own picture or car logo in the standard applications Radio, Music, Video, Bluetooth music.
Located in Settings - Display General - Set your background or logo in Radio and Music. It is desirable to download pictures in PNG format with a transparent substrate. For example, in Google search, enter the brand of your car, for example hyundai ix35 png and go to Pictures. The higher the resolution of the picture, the better. All can be viewed at VIDEO .
Added custom camera parking lines. The code is taken HERE (many thanks to the developers), only everything is finalized for 8 android.
Added two new screensavers with analog speed display via GPS in KMH and MPH. Also located in the OEM application in the Screensavers folder. Changing the view is also supported with a finger in the middle of the screen;
Added a new equalizer for DSP radio .
Many other additions and fixes.
The full version of firmware 3.5 dated May 14, 2019.
I strongly recommend that you make Wipe Data (reset to factory settings) AFTER installing the firmware.
After installation - go to Settings Mod (to update all settings)
All updated launchers and applications are in the OEM application. (everything is updated in the system too)
What's new, added, fixed in version 3.5:
-The soundbar disappears faster.
-Fixed in Radio, the radio station search panel (relevant for Russia) (if you had Radio installed from the OEM application, you need to update it from there)
-In Settings Mod - Basic Settings added whitelist of applications for auto launch after sleep. Enter the package name of the application you need, separated by a semicolon ";".
You can find out the name of the package in this section of Settings. For example, for ViperFX, the package name is: com.pittvandewitt.viperfx, for StrelkaGPS: com.ivolk.StrelkaGPS
Many thanks for the help of sva4pda!
All screensavers have been reworked, if you have installed a screensaver from an OEM application, you need to update it again from an OEM application.
Now all tags from music players, Bluetooth music, Radio (also RDS) are shown. When you first start, you will be asked for permission for notifications - allow them! And activate the module for Xposed - screensaver.
Thanks for helping graser !!
Launcher settings, bar and screensaver status are now in the main Mod Settings window.
In Settings Mod - Screensaver Settings - you can set your car logo. Download from the Internet the logo of the car in a PNG image with a transparent cover,
size 300x190 Px. Copy it to the internal SD card and go to Settings - Screensaver settings - set the logo.
All launchers have been reworked, if you have installed a launcher from an OEM application, then you need to update it again from an OEM application. When you first start, you will be asked for permission for notifications - allow them!
Now all tags from music players, Bluetooth music, Radio (also RDS) are shown in launchers.
The screensaver with analog speed is fixed - now the speed display starts automatically. (lies in an oem application)
A lot of other additions and fixes!
Video: https://www.youtube.com/watch?v=TaAcfrb-lAA
Download version 3.5: https://yadi.sk/d/VRSZI-xq6-rW4Q
Mirror: https://mega.nz/#!d0gQCIwR!NHTmVGKRFjFuWgMRVlK-6f2WHS2bgPXlSZjk08LDFzU
Mod 9.0 Android Pie for PX5 - https://forum.xda-developers.com/an...malaysk-rom-px5-2-4-gb-android-6-8-9-t3955343
Released online update version 3.5.1:
Updated all screensavers, if you have installed a screensaver from an OEM application - update it again from there.
Fixed display of the main weather in the screensaver.
Fixed icon launch settings from the screensaver.
Fixed auto brightness on GPS.
GPS MPH Speed removed from the system - is now in the OEM application, along with the MPH screensaver.
Other fixes.
Who wants to translate Settings into their native language - https://forum.xda-developers.com/showpost.php?p=78421073&postcount=2499
Big request to support the project! I need to pay for a server for online updates! Who is not indifferent and likes my firmware and so that the project can be developed HERE
Video V. 3.0: https://www.youtube.com/watch?v=GSD4UobdexU
Video 3.4 - https://www.youtube.com/watch?v=DmkI...ature=youtu.be
Video ViperFX settings - https://www.youtube.com/watch?v=dp6nSWIJwPg
It was the most difficult firmware for me, from all firmware. If you appreciate my work and the time I spent, you can buy me a beer here :highfive:

reserved

reserved

Oh wow :good:
Thank you Malaysk now we can update our 6.XX Android unit to Android 8

update.zip file Do not update from android 8.0 (ha) to Malaysk
Updates to Error

Thank you

sadaghiani said:
update.zip file Do not update from android 8.0 (ha) to Malaysk
Updates to Error
Click to expand...
Click to collapse
You must do from 1 to 5 points in the section
Installation:

Hello Malaysk,
Does this manual also apply to devices that already have 8.0 installed? With 6.0.1 the ROM was always played over the update file on the device.

A few questions concerning preparing sdcard1
1. What size does the card need to be ? (I have a spare 4GB card )
2.Does the process work on Windows 10 (I'm a bit stuck if it doesn't)
Attempting this process on a windows 10 with the above 4GB card I get an 'Open Object of Disk Failed' error.

Grisu002 said:
Hello Malaysk,
Does this manual also apply to devices that already have 8.0 installed? With 6.0.1 the ROM was always played over the update file on the device.
Click to expand...
Click to collapse
You should definitely replace in the firmware for the modified recovery to install my firmware. Therefore, you need to do all 5 items in the section
Installation:
movieifx said:
A few questions concerning preparing sdcard1
1. What size does the card need to be ? (I have a spare 4GB card )
2.Does the process work on Windows 10 (I'm a bit stuck if it doesn't)
Attempting this process on a windows 10 with the above 4GB card I get an 'Open Object of Disk Failed' error.
Click to expand...
Click to collapse
1. Any sd card of 2-32 gigabytes will work.
2. Change to another SD card. Maybe it is corrupted?

Malaysk said:
You should definitely replace in the firmware for the modified recovery to install my firmware. Therefore, you need to do all 5 items in the section
Installation:
1. Any sd card of 2-32 gigabytes will work.
2. Change to another SD card. Maybe it is corrupted?
Click to expand...
Click to collapse
Malaysk, I would like to install your Oreo rom but please tell me why my MX W2 b5626 does not allow me to start the flash of recovery 8 with Kumarai files. Some claim that my slot is fake, it is not enabled to boot from Sd.Però I have to say that I did not create the SD with Windows 7 because I did not have it. I used Windows Vista and 10 and in fact they both gave me an error. What do you think is a change to say SOoppure my unit will never flas the new recovery 8? Another thing: I have never managed to get in recovery from keys because it has no keys, I'm always entered by USB keyboard. You say that I will have problems getting into it after installing the new recovery when the screen turns gray? Answer me please. Thank you

I just tried to install the 8.0 update but the devise will not start the update and just boot to the launcher.
I re boot into recovery and the update path does not show up.
I am still in recovery 6.2.
Do I need to flash recovery 8.0 before hand? The instructions do not say. How to download and install recovery 8.0?
Thanks

maniep said:
I just tried to install the 8.0 update but the devise will not start the update and just boot to the launcher.
I re boot into recovery and the update path does not show up.
I am still in recovery 6.2.
Do I need to flash recovery 8.0 before hand? The instructions do not say. How to download and install recovery 8.0?
Thanks
Click to expand...
Click to collapse
Instruction says you need two SD-cards. One boot SD-card with the recovery 8 and one with Malaysk rom.
Just read

Clandaries said:
Instruction says you need two SD-cards. One boot SD-card with the recovery 8 and one with Malaysk rom.
Just read
Click to expand...
Click to collapse
I made 2 SD Cards.
The 1st one has 3 files on it:
RKSDFW.TAG
SD_BOOT_CONFIG_CONFIG
SDUPDATE
The second Card has this 2 Files:
Copy_to_Innternal_sd_(SDCARD)
Zip file UPDATE
will not self update by inserting the first card.
Advise?

After upgrading the given software via @ Malaysk, I still have the basic OREO, I installed with the cleaning.
No additives as given in post # 1

mirrors:
dropbox:
recovery https://www.dropbox.com/s/43zopglkpsvxzjw/sdupdate_img from 8.0 Android.rar?dl=0
v1.1 https://www.dropbox.com/s/uvujqbyad...PX5_v_1.1_MALAY_22_03_2018_MTCD_MTCE.rar?dl=0
google drive:
recovery https://drive.google.com/file/d/1APMBe0GmBCez_A4bMOfNLVt2yI51EIG6/view?usp=sharing
v1.0 https://drive.google.com/file/d/10iKTBIvklhzWMXOXDxoLG0T5gcwN2Nhp/view?usp=sharing
v1.1 https://drive.google.com/file/d/1vReptyOHBQnUmHUorgtA4qm7YJKWM0YI/view?usp=sharing
v2.0 https://drive.google.com/open?id=1-KasU6Gs2seQC0DAxxkKy5atWER8Jw7b
v3.0 https://drive.google.com/file/d/1NFDgfusCb5A9dKXHdNpFrOJjTnh_BY8D/view?usp=sharing
v3.2 https://drive.google.com/file/d/1BcwBQLe9a18zl8xNdgfMT_CU-q8nF7BX/view?usp=sharing

i do install malay mod
very nice
thank you
but A Note
for install first stage
you must go to recovery mod and reboot then This step is done

Malaysk:
Is the only update to your sdupdate.img the one from kumarai the malaysk splash screen on boot?
Either way I can confirm that this process worked coming from malaysk android 6 v7.2 on a mtc d/e 2gb unit

That's how it looks after me after installation:

Can I upgrade a system that has a DSP?

Only for devices processor Rockchip PX30, MCU - MTCD, MTCE, MTXX (XX- different letter combinations ) Android 9.0 !!!
Mod Pie 9.0 Android PX30 RK3326
For Mod Pie 9.0 Android PX6 MCU STM32 RK3399 is HERE
For PX6 RK3399 mod 9 android is HERE
For PX5 RK3368 mod 9 android is HERE
Only for devices that already have 9 android from the factory !!
With firmware device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!
Everything you do - you do at your own peril and risk.
Only for those who know how to get into the recovery (different combinations of keys) !!!​
Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
Do not mix up your device !!! This is for PX30 RK3326 - MCU should start with MTCX (where X may have different letters) !!! Go to Settings-System - About the device and see your model !!!
​What is added, changed:
LITE firmware version:
Root access
Added ESFileExplorer, RootExplorer, PlanetsPack live wallpapers.
Two launchers (one with day and night support)
The ability to start screensaver and set the start time of 15-30 seconds 1-3-5-7-10 minutes is included.
By default, video viewing while driving is enabled and sound muting in Navigation is set to -3.
Changed the Music and Radio application (also made translucent)
The ability to set your logo in the Radio and Music application in Settings.
Changed the main Settings.
Reworked soundbar
Reworked watches in the Status Bar with the ability to edit them - set the size, color, date.
The ability to set the viewing speed of Internet traffic in the Status Bar.
Ability to change color and gradient in the Status Bar.
Many other changes and additions.
Video LITE firmware version:
Installation: Please read carefully the instructions for installing the firmware in the archive along with the firmware.
Only for devices that already have 9 android from the factory !!​Do not mix up your device !!! This is for PX30 RK3326 - MCU should start with MTCX (where X may have different letters) !!! Go to Settings - System - About the device and see your model !!!
Download lite firmware version 1.0: https://yadi.sk/d/Qx8le85frD93ng
Mirror lite firmware version 1.0: https://mega.nz/#!5gIWiA4D!fFnVVrg_0scFzwd5-MpXCD44AYbpSjQ2tXD_1wRc-lI
Full firmware version :
All that is added in the lite version firmware of PLUS +:
Full root access (including the System section)
Six fully modified launchers with viewing tags of listening music (any music application), Bluetooth music and radio stations.
The ability to configure launchers (enable, disable unnecessary functions in the Settings) and the Weather settings in them and display speed via GPS.
Fixed GPS.
Improved location accuracy.
With a cold start - satellites are found in 40-70 seconds.
With a hot start (after sleep or reboot) - instantly.
Who had problems with USB ports or WiFi loss - fixed.
Initialization of USB and WiFi after a full system boot and after sleep.
A new method and settings for the white list of programs to start after sleep (located in Mod Settings - Mod Settings - System Settings)
New whitelist for adding third-party programs (for example Poweramp)
when launched, the sound will be muted for regular programs Music, radio, etc. (located in Settings Mod - Mod Settings - System Settings)
A new white list for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
Redone Launcher with support for day and night. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen.
- Clock, GPS speed, Weather, or choose to display your logo (download the logo on the Internet (for example, the logo of a BMW car),
in PNG format and preferably with a transparent backing and copy the file to the device’s internal memory)
The new graphic equalizer in the Music and Screensaver applications, with four different graphic equalizers and color choices.
3 types of screensavers with analog and digital clocks, with the ability to show speed by GPS, Weather, tag tags of listening music (any music application),
Bluetooth music and radio stations. Full customization of screensavers - color, font, disabling unnecessary functions, logo of your car, etc. in settings.
Change the screensaver view - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM application.
Customizable rear camera parking lines. You need to enable them in Settings - Settings related to the car - Advanced settings - Parking lines (ON)
Changed the volume panel and reduced the time of its disappearance.
Fully customizable Bar Status with the ability to enable and disable buttons and icons in it in Settings.
A reset button has been added to the Status Bar.
Screensaver, Music, Navigation, Bluetooth Music buttons have been added to the Status Bar (you can enable - disable in the settings)
Changed the function of calling the brightness panel in the Status Bar.
The screensaver now starts in all programs, in Settings there is a White List of applications where you can specify applications where the screensaver will not start.
Added the White List of Applications in Settings, where you can specify autorun after sleep.
Added equalizer ViperFX - settings can be viewed on the video
Changed the Bluetooth Music app.
Factory settings are changed for resolution 1024X600 and Russian translation is added.
Completely changed applications Music, Radio, Video.
Keyboard replaced by SwiftKey
You can execute your scripts in a folder System/etc/Init.d
Added online radio PCRadio (will appear if Wipe Data is done).
The icons in the Status Bar have been fixed for applications that have support day and night (bluetooth, Radio, launcher).
In the OEM application Added new Radio with support for day and night (translucent)
Go to the OEM application and install the application from there (there are screenshots there)
Added analog screensaver (located in OEM application)
Settings Mod - Mod Settings - System Settings - added Auto screen brightness by GPS.
Settings Mod - Display General - added Developer options.
In the OEM application - ScreenClockMalay - added an analog GPS screensaver for MPH (America and others who use MPH)
Support 1280X720 screen resolution
Four custom buttons have been added to screensavers to launch your programs.
Long press on the button - application selection.
Short press on the button - launch the application.
If you have installed the screensaver from the OEM application, you must reinstall it.
Added Music application with support for day and night (located in the OEM application)
Now you can configure the MODE button to launch your applications.
It is located in the Settings Mod - Mod Settings - System Settings - Selecting applications to start by pressing the MODE button.
If it is disabled, the standard method of the MODE button is used (start Radio-Music-Video)
A graphic equalizer has been added to the screensaver.
In the OEM application, another version of the Music application has been added.
Added the ability to automatically adjust sound by GPS speed.
It is located in Settings Mod - Mod Settings - System Settings - GPS Auto volume control .
Removed pop-up messages with auto brightness via GPS.
Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
It is located in Mod Settings - Display General - Pop-up notifications settings for players and Radio.
The new application for the equalizer, more options for tuning the DSP.
In the OEM application there are two types of equalizers, you can set which one you like
Video of the full version of firmware part 1:
Video of the full version of firmware part 2:
Download full firmware version 1.1: To get the FULL version of the firmware, you must download the LITE version of the firmware and read the instructions !!
Update for FULL version 1.1 dated January 25, 2020.
1. Added support for OTA updates via the Internet.
2. Updated graphic equalizer in Music and Screensaver + two new types of graphic equalizer. If you installed Music and Screensaver from the OEM application - you must reinstall them !!
3. New launcher CHS.
4. The new Bluetooth application for making calls. Now you can control the device during calls.
5. New Radio application - located in the OEM application (in the Radio_Mod folder - RADIO_CHS)
6. Fixed WiFi launch (on some devices it did not start automatically after reboot)
7. In Settings Mod - MOD Settings - Statusbar settings - Hide - Show icons in the statusbar - added complete hiding of the StatusBar panel.
8. Updated GPS auto brightness
9. Added TTL selection for modems and WiFi (selection of values from 23 to 256, default 64)
10. Fixed an alternative launch list for your applications using the MODE button
11. Fixed launch of navigation on the hardware button.
12. Added a list of applications that will automatically start after the device is booted (in Mod Settings - Mod Settings - System Settings)
13. Fixed choice of screensaver start time.
14. Many other corrections and additions.
Who has the full version 1.0 and 1.1 (from a different date) installed, write to me by e-mail.
To get the FULL version of the firmware, you must download the LITE version of the firmware and read the instructions !!
Important information! - https://forum.xda-developers.com/showpost.php?p=80099333&postcount=130​
Who wants to translate Settings into their native language - https://forum.xda-developers.com/showpost.php?p=80203260&postcount=88
In the process of filling !!!​

Only for devices that already have 9 android from the factory !!
Click to expand...
Click to collapse
PX30 and PX6 with Android 8.1 can be updated with Modinstaller Pro to Android 9.
https://youtu.be/X0qsmwnaQA8

So, i'm wondering, will this be faster / perform better then the original rom?
I've installed a cpu monitor, and it looks like this cpu doesn't really have much power.
The main reason I'm looking here for a custom rom is that i find my device rather slow , and i was hoping it would perform better, or maybe even overclock the device a bit?

pjottrr said:
So, i'm wondering, will this be faster / perform better then the original rom?
I've installed a cpu monitor, and it looks like this cpu doesn't really have much power.
The main reason I'm looking here for a custom rom is that i find my device rather slow , and i was hoping it would perform better, or maybe even overclock the device a bit?
Click to expand...
Click to collapse
You can try installing the firmware and checking. You can return to the factory firmware at any time.

thnx,
i'll try that
sorry for the edit in this post, i wasn't reading......

so that works great
now all i want is to upgrade to the full version
how can i get the full version?

I have a PX30 device with Android 8.1.0
Exist a solution to upgrade my device to Android 9 other than the Modinstaller Pro.

Hi how do we get full version?

I try couple of times to update this Lite version but with no luck... I have always error no. 21. Tried with factory reset and without reset, always got this same error. I have unit MTCE, PX30, mcu ver. MX3.30 and Android 9.0 (by Hal9k v4.0.0). Any suggestions what's wrong with my unit?

Just read the part about donation people getting the full version!! Thanks!
Email sent! Thanks again!
BTW, had the admin changed my user name from Arden to Cantrepeat.

Timpuli said:
I try couple of times to update this Lite version but with no luck... I have always error no. 21. Tried with factory reset and without reset, always got this same error. I have unit MTCE, PX30, mcu ver. MX3.30 and Android 9.0 (by Hal9k v4.0.0). Any suggestions what's wrong with my unit?
Click to expand...
Click to collapse
Hello! Install the factory version for the PX30 first - https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
S920 Version : PX30 HCT4_px30_9.0_ota(20191101) https://www.sendspace.com/pro/dl/eriohv
Then my firmware.

6mur6mur6 said:
Hi how do we get full version?
Click to expand...
Click to collapse
Hello! Download the LITE version. The archive has instructions for the full version.

Hi Malaysk,
Thnx again for this beatifull rom. just been configuring the full version to my liking for the past 2 hours....
i do mis only one feature ; the programming of the MODE button.
in your instructions you say:
It is located in the Mod Settings - Display General - Selecting applications to start by pressing the MODE button.
but i don't see that option there . is it located somewhere else , not working for my device, or just missing entirely in the px30 version?
do you have any suggestions to this?

Malaysk said:
Hello! Install the factory version for the PX30 first - https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
S920 Version : PX30 HCT4_px30_9.0_ota(20191101) https://www.sendspace.com/pro/dl/eriohv
Then my firmware.
Click to expand...
Click to collapse
Thank you, that do the trick.

Installed on an Eonon GA2176. Full install and working well!
Thanks for the work on the ROM. Great to be root and free of factory ROM!

pjottrr said:
Hi Malaysk,
Thnx again for this beatifull rom. just been configuring the full version to my liking for the past 2 hours....
i do mis only one feature ; the programming of the MODE button.
in your instructions you say:
It is located in the Mod Settings - Display General - Selecting applications to start by pressing the MODE button.
but i don't see that option there . is it located somewhere else , not working for my device, or just missing entirely in the px30 version?
do you have any suggestions to this?
Click to expand...
Click to collapse
I am sorry. I made a mistake in the description. Corrected to the correct description!
Settings Mod - Mod Settings - System Settings - Selecting applications to start by pressing the MODE button.

Malaysk said:
I am sorry. I made a mistake in the description. Corrected to the correct description!
Settings Mod - Mod Settings - System Settings - Selecting applications to start by pressing the MODE button.
Click to expand...
Click to collapse
Thnx, i thought i had looked there as well, but apparently i missed it,
i found the setting, set it up , yet it doesn't seem to work.
i used the wheel key study to bind the mode button to "mode" , is that a correct setup , or should i do something differently?

hi is there anyway to make the icons smaller in the status bar, i think you could in the lite version?
thanks

Running the Full version, everything seems to work well, thanks a lot ! ! !

Hi @Malaysk, quick and noobie question as I'd love to try the lite version before buying the full one:
I'm running a PX30, but a CHS one.
My build number doesn't mention the RK3326 (the guy that installed the unit updated the original rom to this one: https://yadi.sk/d/umCvHqCDzHccr/RockChip PX30 Android 9/CHS ).
Photo from my unit:
https://photos.app.goo.gl/svDPfkQ7em4x6YUh7
I know I can always back up in recovery and rollback, but I'm kind of afraid I might make some stupid mistake by flashing this one and bricking the unit somehow due to some incompatibility. Do you know if it's compatible at all?
Cheers and thanks for your work!

Only for devices processor Rockchip PX5, MCU - MTCD, MTCE Android 10.0 !
Mod Q 10.0 Android PX5 RK3368​For PX6 RK3399 mod 10 android is HERE
Only for those who have 10 android installed, a PX5 processor and have an installed MCU that starts with MTC (X) - where X can have different letters.
With firmware device, you need to understand all the risks. Neither I nor the website is not responsible for your actions and possibly killed devices! Everything you do - you do at your own peril and risk.
Before installing the firmware, be sure to try to get into the Recovery (I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times ).
IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product (this is due to the fact that in 10 android these sections are dynamic and protected by the android itself from changes)- otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
How do you know if your device is suitable for this forum thread? You can see the device in Settings - System - About device: look at the photo
​What's added, fixed in LITE firmware version:
Can't update Magisk module !! Only Magisk Manager can be updated!
Root access (Magisk) 8.0.2
IMPORTANT!! : You cannot change the firmware versions in the system partitions in LITE - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Added ESFileExplorer, RootExplorer programs.
Two modified launchers with the ability to customize them (located in Mod Settings).
Enabled the ability to start the screensaver and set the start time to 15-30 seconds 1-3-5-7-10 minutes.
By default, video viewing while driving is enabled and audio mute in Navigation is set to -3.
Changed basic Settings.
Possibility to set viewing of Internet traffic speed in the Status Bar.
Ability to change color and gradient in the Status Bar.
Many other changes and additions.
Installing LITE firmware version:
Unzip the archive and write the Update.zip file to a SD card or USB flash drive (must be formatted in FAT32). Insert into the loaded device. After a few seconds, the update menu will appear. We put a checkmark on Wipe Data (you will lose all your installed programs) and click on the Install button. See the screenshot below. The machine will reboot and the firmware installation will begin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download LITE version:
Version updated as of March 28, 2022.
Be sure to read the instructions inside the archive, along with the firmware !!!
I want to warn you: Everything that you do, you do at your own peril and risk.
Can't update Magisk module !! Only Magisk Manager can be updated!
Download: https://disk.yandex.ru/d/LE0KPXUxW-dJkQ
Mirror: https://mega.nz/file/QsJnkK4S#pFZ1GC2Pq6qfrsdX6qzVAF_d6ksLek3VKIt2m0RjOsI
----------------------------------------------
What's added, fixed in FULL firmware version:
Can't update Magisk module !! Only Magisk Manager can be updated!
Full root access (Magisk)
IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Seven completely modified launchers with the ability to view tags for listening to music (any music app), Bluetooth music and radio stations.
The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disabling unnecessary functions, your car logo, etc. In the settings.
Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
Reload key added to the status bar.
Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
Changed the function of calling the brightness panel in the status bar.
The screensaver is now launched in all programs, in the Mod Settings there is an Application Whitelist, where you can specify applications where the screensaver will not start.
Added a list of applications in the Mod settings, where you can specify autostart after sleep.
Added equalizer ViperFX - you can watch the settings in the video
Changed Bluetooth Music app.
Applications Music, Radio, Video have been completely changed. You can install standard applications from the OEM application.
Video files can be played in the background.
Now when you switch on rear view camera the brightness is in creased up to maximum automatically
4 different types of radio apps have been added in the OEM app (including radio with Day and Night support)
Go to the OEM app and install the app from there.
3 different types of Music app have been added in the OEM app.
Split screen support (not all apps support)
Added online radio PCRadio
Mod settings - MOD Settings - System settings - added automatic screen brightness by GPS.
Supports 1280X720 and 1024X600 screen resolutions.
Added four customizable buttons to screensavers to launch your programs.
- Long press on the button - select the application.
- Short press on the button - start the application.
You can now configure the MODE button to launch your applications.
- Located in Mod Settings - MOD Settings - System Settings - Select applications to launch by pressing the MODE button.
- If it is disabled, the standard method of operation of the MODE button is used (launching Radio-Music-Video)
Added the ability to automatically adjust the sound based on GPS speed.
Located in Settings mod - MOD Settings - Sound settings - Auto volume control by GPS.
Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
Located in Mod Settings - MOD Settings - System Settings - Popup Settings.
Fixed GPS work.
- Improved location accuracy.
- With a cold start - satellites are located in 40-70 seconds.
- With a hot start (after sleep or reboot) - instantly.
Anyone who had problems with USB ports or missing WiFi - fixed.
USB and WiFi are initialized after the system is fully booted and after sleep.
New method and settings of the whitelist of programs to run after sleep (located in Mod Settings - Mod Settings - System Settings)
New whitelist for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
Redesigned Launcher with day and night support. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen
- Clock, GPS speed, Weather or choose to display your logo (download a logo on the Internet (for example, a BMW car logo),
in PNG format and preferably with a transparent background and copy the file to the device's internal memory)
If after updating the firmware, every time the system boots, the location permissions for the launcher are asked, go to Mod Settings - Mod Settings -
Launcher Settings - Launcher with day and night support and enable GPS speed display.
New graphic equalizer in Music and Screensaver apps, with four different graphic equalizers and color selection.
You can now set the time for showing music and radio notifications in Mod Settings from 1 to 10 seconds.
You can change the DPI of the screen. The range is from 260dpi to 160dpi (standard 220 by default) - I set it to 200dpi. Located - Mod Settings - Mod Settings - System Settings.
You can assign the launch of your applications to the buttons on the steering wheel or on the front panel of the device. Located in Mod Settings - Mod Settings - Car (as you select applications there, then assign buttons through the standard application, for setting the buttons on the steering wheel, for example). - you can watch the video on how to configure -
More flexible graphic equalizer settings are in Mod Settings - Mod Settings - Sound Settings.
Mod Settings - Mod Settings - Car - added GPS fix (enabled by default).
Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
Configurable rear camera parking lines, you need to go to Settings Mod – Car - related settings – Extra settings and enable 1-2-3 type of Rear view ruler.
- In Mod Settings - MOD Settings - System Settings - Pop-up Notification Settings - added settings:
1. Enable display of album covers (picture)
2. Covers display size in px (pixels) - from 10 px to 100 px
- Fixed autostart Nav Radio + after sleep (it won't start from the background)
- Added French and Polish translation to Mod Settings (thanks to oxygen and XDA users)
- In the Bluetooth application, the panel for incoming and outgoing calls has been changed.
- Added display of covers from players (including standard player, online players, third-party players) in the screensaver. - only for PX5 and PX6, if the screensaver was installed from the OEM application before, then you need to reinstall it from there.
Located in Mod Settings - Mod Settings - Screensaver Settings
1. Enable display of covers (on by default)
2. Set the transparency level of the picture
- Added the ability to display radio station logos in the Radio application, pop-up notifications, in the screensaver.
All Radio applications that have the ability to display logos are in the OEM application and have the word _logos at the end of the name, for example
HCT4Radio_MOD_Malay_logos.apk
HLARadio_MOD_Mal_logos.apk
MTCRadio_MAL_NEW_logos.apk
Question: What needs to be done to show the logos of radio stations?
Answer :
1. Download, for example, this archive of logos - https://disk.yandex.ru/d/8hmqpKHga0fQHQ or https://disk.yandex.ru/d/696euyOc9YLmiQ or download them from the Internet.
2. The picture must be in .png format, preferably with a resolution of 250X250 px or 500X500 px (the higher the resolution, the better the picture will be shown in the screensaver)
3. Find out the frequencies of radio stations in your city by entering into Google search "frequencies of radio stations (your city)"
4. Rename pictures in .png format with the name of the radio station frequency. For example: there is a radio station Record, it broadcasts in your city at a frequency of 102.3 -
rename the picture with the name 102.3.png.
5. Create a Radio folder and copy all your pictures there.
6. Copy the Radio folder to the root of the sdcard internal memory.
- Ability to disable autorun of standard applications after loading or after sleep. Located in Settings MOD - Mod Settings - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT.
- Ability to change the theme Day - Night automatically by Auto screen brightness by GPS. Located in Settings MOD - Settings Mod - System Settings - Auto screen brightness by GPS - Change automatically the Day / Night theme (it is advisable to reboot later so that the changes apply)
- Added DFX Light Processing 2 impulse to ViperFX, which radically changes the sound on the device. It needs to be activated in ViperFX.
- Improved overall work speed.
- Changes to GPS signal processing.
- Completely rewritten from scratch Gps Parser, added support for A-GPS data from the chip side, positioning accuracy in open areas increased to 0-1 meters. (for PX5 - PX6)
- In Mod Settings - Mod settings - Car - added a new setting to change the GPS grouping - Replacing GPS + GLONAS with GPS + BEIDOU
- Added the function "Change commands for switching tracks using the right wheel (spinner)" - in Settings Mod - Mod settings - Car. If your right wheel does not switch music tracks in third-party players, you can try turning it on.
EasyConnected has been updated to the latest version.
Can't update Magisk module !! Only Magisk Manager can be updated!
Many other fixes and additions.
Installing FULL firmware version:
You must download the LITE version, read the instructions inside the archive and be sure to install the LITE version on your device.
VIDEO FULL version
Online update 1.1.8.5 released on August 12, 2021
Online update 1.2 released on 02 October, 2021
Online update 1.2.2 from 03 December 2021
Online update 1.2.8 from 27 July 2022
Latest BETA firmware version 1.2.9.2 dated November 15, 2022
Sample ViperFX settings -
About Iphone and WiFi: https://forum.xda-developers.com/t/...-rk3368-with-android-10.4175209/post-86043841
If you do not run applications where authorization is required : https://forum.xda-developers.com/t/...-rk3368-with-android-10.4175209/post-87005437
Important information (announcement of future OTA updates) - https://forum.xda-developers.com/t/...-rk3368-with-android-10.4175209/post-84457253
Who wants to translate Settings into their native language - https://forum.xda-developers.com/an...roid-6-8-9-t3955343/post80203246#post80203246
----------------------------------------------
Many thanks to the respected Graser from the 4PDA forum for invaluable help in creating the firmware!
+++++++++++++++++++++++++++++
This post is in edit mode! Errors and inaccuracies are possible!
Please excuse me in advance! I very rarely answer questions and do not use private messages!​

Restoring the PX5 MTCE device on the 10 android.​Also, using this method, go from 6-8-9 android to 10 android.
I want to warn you: Everything that you do, you do at your own peril and risk.
Create bootable SD card 10 Android PX5.
Important!!! : very demanding on the type of SD card !! I started installing the firmware when I changed 5 different SD cards from different manufacturers !!!!!
1. Unzip the bootable_sd_card_10_android_PX5 archive to C:/ disk on a laptop or computer.
2. Run SD_Firmware_Tool.exe (as administrator)
3. Select the firmware in .IMG - update_10_android_zavod_PX5.img
4. Click on the Create button.
5. After creating the SD card, insert it into the device and reboot it. The firmware installation will start automatically. Installation will take a very long time, about 40-60 minutes !!!!!
​Restoring a SD card after restoring the device:
​
Download: https://mega.nz/file/chwAVI4A#_DHfhpxGEnswyhTk1K4tjps5ohS64N5Cjz0GQOLMVsU

My device is originally Android 6.0.1 MTCD PX5. I installed Android 10 recovery by using Mod Installer Pro 2 and than installed HCT4_PX5_10.0_ota(2020/06/24) MX/WITSON and using it without any problem.
Can I install this by using "Update" option in recovery directly?

traxformania said:
My device is originally Android 6.0.1 MTCD PX5. I installed Android 10 recovery by using Mod Installer Pro 2 and than installed HCT4_PX5_10.0_ota(2020/06/24) MX/WITSON and using it without any problem.
Can I install this by using "Update" option in recovery directly?
Click to expand...
Click to collapse
If you have factory installed Android 10, you can. In 1 message everything is written. Thanks.

Hi, but do you have something in the works for px6 ?.

marcanpaolo said:
Hi, but do you have something in the works for px6 ?.
Click to expand...
Click to collapse
Of course, soon.

@Malaysk - what Bluetooth types are supported?
For lite?
For Full/paid?

I can't install the update
unfortunately I can't install the update. I have tried several usb memories FAT 32 but the installation won't start.
I have a radio with the original android 10 mcu mtce mx 3.60
---------- Post added at 11:09 AM ---------- Previous post was at 11:07 AM ----------
unfortunately I can't install the update. I have tried several usb memories FAT 32 but the installation won't start.
I have a radio with the original android 10 mcu mtce mx 3.60
https://zapodaj.net/fab4146727a82.jpg.html

marjan2 said:
unfortunately I can't install the update. I have tried several usb memories FAT 32 but the installation won't start.
I have a radio with the original android 10 mcu mtce mx 3.60
---------- Post added at 11:09 AM ---------- Previous post was at 11:07 AM ----------
unfortunately I can't install the update. I have tried several usb memories FAT 32 but the installation won't start.
I have a radio with the original android 10 mcu mtce mx 3.60
https://zapodaj.net/fab4146727a82.jpg.html
Click to expand...
Click to collapse
I had a similar problem with android 10 mx2 24/06 version. Try to install the HCT4_PX5_10.0_ota(20200603).zip and after that the malay version.

Md 725 bluetooth
Hi!
Bluetooth MD725 will work to your version?
Thx!

Hi, I need a link to this file to test, I can't find this file HCT4_PX5_10.0_ota (20200603) .zip

marjan2 said:
Hi, I need a link to this file to test, I can't find this file HCT4_PX5_10.0_ota (20200603) .zip
Click to expand...
Click to collapse
https://docviewer.yandex.ru/view/0/?*=OdzE6bxKYvYvJfSRRKUGNPHjTLF7InVybCI6InlhLWRpc2stcHVibGljOi8vQ1dueWZoYjBBbzRuNnVrczVaYU9CNWpFK3J6a2IyTTRIcHViUSs3ejZxVT06L1JvY2tDaGlwIFBYNSBBbmRyb2lkIDEwL0hDVC9IQ1Q0X1BYNV8xMC4wX290YSgyMDIwMDYwMykuemlwIiwidGl0bGUiOiJIQ1Q0X1BYNV8xMC4wX290YSgyMDIwMDYwMykuemlwIiwibm9pZnJhbWUiOmZhbHNlLCJ1aWQiOiIwIiwidHMiOjE2MDI1MjQ0MTY5MTAsInl1IjoiMTI3ODgyNTYxNTg0MDM5MTQ2In0%3D

:good:
spirosme said:
https://docviewer.yandex.ru/view/0/?*=OdzE6bxKYvYvJfSRRKUGNPHjTLF7InVybCI6InlhLWRpc2stcHVibGljOi8vQ1dueWZoYjBBbzRuNnVrczVaYU9CNWpFK3J6a2IyTTRIcHViUSs3ejZxVT06L1JvY2tDaGlwIFBYNSBBbmRyb2lkIDEwL0hDVC9IQ1Q0X1BYNV8xMC4wX290YSgyMDIwMDYwMykuemlwIiwidGl0bGUiOiJIQ1Q0X1BYNV8xMC4wX290YSgyMDIwMDYwMykuemlwIiwibm9pZnJhbWUiOmZhbHNlLCJ1aWQiOiIwIiwidHMiOjE2MDI1MjQ0MTY5MTAsInl1IjoiMTI3ODgyNTYxNTg0MDM5MTQ2In0%3D
Click to expand...
Click to collapse

marjan2 said:
:good:
Click to expand...
Click to collapse
I uploaded this software, then I tried to upload a soft mod, but unfortunately it is impossible. I've tried three different versions and it's always the same.

danimi said:
Hi!
Bluetooth MD725 will work to your version?
Thx!
Click to expand...
Click to collapse
That would be a miracle. I'm also waiting for someone to fix MD725 module on Android 10.

Hopefully PX30 soon

marjan2 said:
I uploaded this software, then I tried to upload a soft mod, but unfortunately it is impossible. I've tried three different versions and it's always the same.
Click to expand...
Click to collapse
Hello. What error are you going on? Can you upload a photo?
UPD : I looked at your photo: change the USB flash drive to another, you do not see the update.zip file on the flash drive.

Malaysk said:
Hello. What error are you going on? Can you upload a photo?
UPD : I looked at your photo: change the USB flash drive to another, you do not see the update.zip file on the flash drive.
Click to expand...
Click to collapse
photo
the USB flash drive ist ok

marjan2 said:
photo
the USB flash drive ist ok
Click to expand...
Click to collapse
Ok, try to install then version HCT2_PX5_10.0_ota(20200808).zip
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 10/HCT
Will this factory firmware be installed for you?

Malaysk said:
Ok, try to install then version HCT2_PX5_10.0_ota(20200808).zip
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 10/HCT
Will this factory firmware be installed for you?
Click to expand...
Click to collapse
I had hct2.20200525 by default, then I uploaded different versions of hct4. Now I tried to go back to ht2 from the link you uploaded but I have the same bug as with the soft mod. I can't go back on hct2.

Only for devices processor Rockchip PX6, MCU - MTCD, MTCE Android 10.0 !
Mod Q 10.0 Android PX6 RK3399​For PX5 RK3368 mod 10 android is HERE
Only for those who have 10 android installed, a PX6 processor and have an installed MCU that starts with MTC (X) - where X can have different letters.
With firmware device, you need to understand all the risks. Neither I nor the website is not responsible for your actions and possibly killed devices! Everything you do - you do at your own peril and risk.
Before installing the firmware, be sure to try to get into the Recovery (I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times ).
IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product (this is due to the fact that in 10 android these sections are dynamic and protected by the android itself from changes)- otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
How do you know if your device is suitable for this forum thread? You can see the device in Settings - System - About device: look at the photo
​What's added, fixed in LITE firmware version:
Can't update Magisk module !! Only Magisk Manager can be updated!
Root access (Magisk) 8.0.2
IMPORTANT!! : You cannot change the firmware versions in the system partitions in LITE - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Added ESFileExplorer, RootExplorer programs.
Two modified launchers with the ability to customize them (located in Mod Settings).
Enabled the ability to start the screensaver and set the start time to 15-30 seconds 1-3-5-7-10 minutes.
By default, video viewing while driving is enabled and audio mute in Navigation is set to -3.
Changed basic Settings.
Possibility to set viewing of Internet traffic speed in the Status Bar.
Ability to change color and gradient in the Status Bar.
Many other changes and additions.
Installing LITE firmware version:
Unzip the archive and write the Update.zip file to a SD card or USB flash drive (must be formatted in FAT32). Insert into the loaded device. After a few seconds, the update menu will appear. We put a checkmark on Wipe Data (you will lose all your installed programs) and click on the Install button. See the screenshot below. The machine will reboot and the firmware installation will begin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download LITE version:
Version updated as of March 28, 2022.
Be sure to read the instructions inside the archive, along with the firmware !!!
I want to warn you: Everything that you do, you do at your own peril and risk.
Can't update Magisk module !! Only Magisk Manager can be updated!
Download: https://disk.yandex.ru/d/Nd7qBuyMn2VgnQ
Mirror: https://mega.nz/file/Y5gXyC5a#SRQAjJy5DbZtI97wBenpXdlpVm1H810t5D1mGKhPPpU
----------------------------------------------
What's added, fixed in FULL firmware version:
Can't update Magisk module !! Only Magisk Manager can be updated!
Full root access (Magisk)
IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Seven completely modified launchers with the ability to view tags for listening to music (any music app), Bluetooth music and radio stations.
The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disabling unnecessary functions, your car logo, etc. In the settings.
Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
Reload key added to the status bar.
Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
Changed the function of calling the brightness panel in the status bar.
The screensaver is now launched in all programs, in the Mod Settings there is an Application Whitelist, where you can specify applications where the screensaver will not start.
Added a list of applications in the Mod settings, where you can specify autostart after sleep.
Added equalizer ViperFX - you can watch the settings in the video
Changed Bluetooth Music app.
Applications Music, Radio, Video have been completely changed. You can install standard applications from the OEM application.
Video files can be played in the background.
Now when you switch on rear view camera the brightness is in creased up to maximum automatically
4 different types of radio apps have been added in the OEM app (including radio with Day and Night support)
Go to the OEM app and install the app from there.
3 different types of Music app have been added in the OEM app.
Split screen support (not all apps support)
Added online radio PCRadio
Mod settings - MOD Settings - System settings - added automatic screen brightness by GPS.
Supports 1280X720 and 1024X600 screen resolutions.
Added four customizable buttons to screensavers to launch your programs.
- Long press on the button - select the application.
- Short press on the button - start the application.
You can now configure the MODE button to launch your applications.
- Located in Mod Settings - MOD Settings - System Settings - Select applications to launch by pressing the MODE button.
- If it is disabled, the standard method of operation of the MODE button is used (launching Radio-Music-Video)
Added the ability to automatically adjust the sound based on GPS speed.
Located in Settings mod - MOD Settings - Sound settings - Auto volume control by GPS.
Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
Located in Mod Settings - MOD Settings - System Settings - Popup Settings.
Fixed GPS work.
- Improved location accuracy.
- With a cold start - satellites are located in 40-70 seconds.
- With a hot start (after sleep or reboot) - instantly.
Anyone who had problems with USB ports or missing WiFi - fixed.
USB and WiFi are initialized after the system is fully booted and after sleep.
New method and settings of the whitelist of programs to run after sleep (located in Mod Settings - Mod Settings - System Settings)
New whitelist for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
Redesigned Launcher with day and night support. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen
- Clock, GPS speed, Weather or choose to display your logo (download a logo on the Internet (for example, a BMW car logo),
in PNG format and preferably with a transparent background and copy the file to the device's internal memory)
If after updating the firmware, every time the system boots, the location permissions for the launcher are asked, go to Mod Settings - Mod Settings -
Launcher Settings - Launcher with day and night support and enable GPS speed display.
New graphic equalizer in Music and Screensaver apps, with four different graphic equalizers and color selection.
You can now set the time for showing music and radio notifications in Mod Settings from 1 to 10 seconds.
You can change the DPI of the screen. The range is from 260dpi to 160dpi (standard 220 by default) - I set it to 200dpi. Located - Mod Settings - Mod Settings - System Settings.
You can assign the launch of your applications to the buttons on the steering wheel or on the front panel of the device. Located in Mod Settings - Mod Settings - Car (as you select applications there, then assign buttons through the standard application, for setting the buttons on the steering wheel, for example). - you can watch the video on how to configure -
More flexible graphic equalizer settings are in Mod Settings - Mod Settings - Sound Settings.
Mod Settings - Mod Settings - Car - added GPS fix (enabled by default).
Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
Configurable rear camera parking lines, you need to go to Settings Mod – Car - related settings – Extra settings and enable 1-2-3 type of Rear view ruler.
- In Mod Settings - MOD Settings - System Settings - Pop-up Notification Settings - added settings:
1. Enable display of album covers (picture)
2. Covers display size in px (pixels) - from 10 px to 100 px
- Fixed autostart Nav Radio + after sleep (it won't start from the background)
- Added French and Polish translation to Mod Settings (thanks to oxygen and XDA users)
- In the Bluetooth application, the panel for incoming and outgoing calls has been changed.
- Added display of covers from players (including standard player, online players, third-party players) in the screensaver. - only for PX5 and PX6, if the screensaver was installed from the OEM application before, then you need to reinstall it from there.
Located in Mod Settings - Mod Settings - Screensaver Settings
1. Enable display of covers (on by default)
2. Set the transparency level of the picture
- Added the ability to display radio station logos in the Radio application, pop-up notifications, in the screensaver.
All Radio applications that have the ability to display logos are in the OEM application and have the word _logos at the end of the name, for example
HCT4Radio_MOD_Malay_logos.apk
HLARadio_MOD_Mal_logos.apk
MTCRadio_MAL_NEW_logos.apk
Question: What needs to be done to show the logos of radio stations?
Answer :
1. Download, for example, this archive of logos - https://disk.yandex.ru/d/696euyOc9YLmiQ or download them from the Internet.
2. The picture must be in .png format, preferably with a resolution of 250X250 px or 500X500 px (the higher the resolution, the better the picture will be shown in the screensaver)
3. Find out the frequencies of radio stations in your city by entering into Google search "frequencies of radio stations (your city)"
4. Rename pictures in .png format with the name of the radio station frequency. For example: there is a radio station Record, it broadcasts in your city at a frequency of 102.3 -
rename the picture with the name 102.3.png.
5. Create a Radio folder and copy all your pictures there.
6. Copy the Radio folder to the root of the sdcard internal memory.
- Ability to disable autorun of standard applications after loading or after sleep. Located in Settings MOD - Mod Settings - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT.
- Ability to change the theme Day - Night automatically by Auto screen brightness by GPS. Located in Settings MOD - Settings Mod - System Settings - Auto screen brightness by GPS - Change automatically the Day / Night theme (it is advisable to reboot later so that the changes apply)
- Added DFX Light Processing 2 impulse to ViperFX, which radically changes the sound on the device. It needs to be activated in ViperFX.
- Improved overall work speed.
- Changes to GPS signal processing.
- Completely rewritten from scratch Gps Parser, added support for A-GPS data from the chip side, positioning accuracy in open areas increased to 0-1 meters. (for PX5 - PX6)
- In Mod Settings - Mod settings - Car - added a new setting to change the GPS grouping - Replacing GPS + GLONAS with GPS + BEIDOU
- Added the function "Change commands for switching tracks using the right wheel (spinner)" - in Settings Mod - Mod settings - Car. If your right wheel does not switch music tracks in third-party players, you can try turning it on.
EasyConnected has been updated to the latest version.
Can't update Magisk module !! Only Magisk Manager can be updated!
Many other fixes and additions.
Installing FULL firmware version:
You must download the LITE version, read the instructions inside the archive and be sure to install the LITE version on your device.
Download FULL version:
Installation only on LITE firmware version and only through online update. Download the LITE version and read the instructions inside the archive.
VIDEO FULL version
Online update 1.1.8.5 released on August 12, 2021
Online update 1.2 released on 02 October, 2021
Online update version 1.2.2 from 03 December 2021
Online update 1.2.8 from 27 July 2022
Latest BETA firmware version 1.2.9.2 dated November 15, 2022
Sample ViperFX settings -
About Iphone and WiFi: https://forum.xda-developers.com/t/...-rk3399-with-android-10.4176069/post-86043843
If you do not run applications where authorization is required : https://forum.xda-developers.com/t/...-rk3368-with-android-10.4175209/post-87005437
Important information (announcement of future OTA updates) - https://forum.xda-developers.com/t/...-rk3399-with-android-10.4176069/post-84457255
Who wants to translate Settings into their native language - https://forum.xda-developers.com/an...roid-6-8-9-t3955343/post80203246#post80203246
----------------------------------------------
Many thanks to the respected Graser from the 4PDA forum for invaluable help in creating the firmware!
+++++++++++++++++++++++++++++
This post is in edit mode! Errors and inaccuracies are possible!
Please excuse me in advance! I very rarely answer questions and do not use private messages!​

Restoring the PX6 MTCE device on the 10 android.​Also, using this method, go from 9-10 android to 10 android.
I want to warn you: Everything that you do, you do at your own peril and risk.
Create bootable SD card 10 Android PX6.
Important!!! : very demanding on the type of SD card !! I started installing the firmware when I changed 5 different SD cards from different manufacturers !!!!!
1. Unzip the bootable_sd_card_10_android_PX6 archive to C:/ disk on a laptop or computer.
2. Run SD_Firmware_Tool.exe (as administrator)
3. Select the firmware in .IMG - update_10_android_zavod_PX6.img
4. Click on the Create button.
5. After creating the SD card, insert it into the device and reboot it. The firmware installation will start automatically. Installation will take a very long time, about 40-60 minutes !!!!!
​Restoring a SD card after restoring the device:
​
Download: https://disk.yandex.ru/d/giQ3qdmL_8TR0w

If we have purchased your firmware for 9.0 full, do we need to do another purchase for this android 10 version?
Also, what's the upgrade procedure like for those of us coming off of malaysk 9.0?
I wonder if the upgrade is even worth it? Does your android 10 bring anything extra to the table? Love your android 9 firmware!

Thank you the best rom for px6 a10 so far !

stokedcrf said:
If we have purchased your firmware for 9.0 full, do we need to do another purchase for this android 10 version?
Also, what's the upgrade procedure like for those of us coming off of malaysk 9.0?
I wonder if the upgrade is even worth it? Does your android 10 bring anything extra to the table? Love your android 9 firmware!
Click to expand...
Click to collapse
@Malaysk hasnt confirmed Bluetooth support in Android 10, it's likely that MD-725 (RTL) isnt supported, so many devices might not have working Bluetooth on these versions. There may be other BT types not supported, but @Malaysk hasnt confirmed supported devices at all.

ok so i'm not entirely sure what the lite version actually consists of. I appreciate that it says a lot of things have been changed and added in the FULL version. But are we talking that the LITE version is just stock rom with a couple of launchers , root and a few other apps?
what rom is it actually based on or is it compiled from fresh?
is the lite version going to give me enough difference from stock 10 i have on my current unit in terms of speed, responsiveness and suchlike to make it worthwhile basically starting afresh?
bear in mind that i'm new to these devices and i've not installed any custom roms like this or hal9k on it before (plenty of experience with phones /tablets though)

Malaysk said:
Only for devices processor Rockchip PX6, MCU - MTCD, MTCE Android 10.0 !
Mod Q 10.0 Android PX6 RK3399
For PX5 RK3368 mod 10 android is HERE
Only for those who have 10 android installed, a PX6 processor and have an installed MCU that starts with MTC (X) - where X can have different letters.
With firmware device, you need to understand all the risks. Neither I nor the website is not responsible for your actions and possibly killed devices! Everything you do - you do at your own peril and risk.
Before installing the firmware, be sure to try to get into the Recovery (I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times ).
IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product (this is due to the fact that in 10 android these sections are dynamic and protected by the android itself from changes)- otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
How do you know if your device is suitable for this forum thread? You can see the device in Settings - System - About device: look at the photo
What's added, fixed in LITE firmware version:
Root access (Magisk) 8.0.2
IMPORTANT!! : You cannot change the firmware versions in the system partitions in LITE - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Added ESFileExplorer, RootExplorer programs.
Two modified launchers with the ability to customize them (located in Mod Settings).
Enabled the ability to start the screensaver and set the start time to 15-30 seconds 1-3-5-7-10 minutes.
By default, video viewing while driving is enabled and audio mute in Navigation is set to -3.
Changed basic Settings.
Possibility to set viewing of Internet traffic speed in the Status Bar.
Ability to change color and gradient in the Status Bar.
Many other changes and additions.
Installing LITE firmware version:
Unzip the archive and write the Update.zip file to a SD card or USB flash drive (must be formatted in FAT32). Insert into the loaded device. After a few seconds, the update menu will appear. We put a checkmark on Wipe Data (you will lose all your installed programs) and click on the Install button. See the screenshot below. The machine will reboot and the firmware installation will begin.
Download LITE version:
Be sure to read the instructions inside the archive, along with the firmware !!!
I want to warn you: Everything that you do, you do at your own peril and risk.
Download: https://yadi.sk/d/Tz3MyqYQdzr38Q
Mirror: https://mega.nz/file/NxZjzQjB#I13RRu_Lb5VAnt4EJ1VkjOtwDfPF2j6rKxhJ4BbOuLk
----------------------------------------------
What's added, fixed in FULL firmware version:
Full root access (Magisk)
IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Seven completely modified launchers with the ability to view tags for listening to music (any music app), Bluetooth music and radio stations.
The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disabling unnecessary functions, your car logo, etc. In the settings.
Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
Reload key added to the status bar.
Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
Changed the function of calling the brightness panel in the status bar.
The screensaver is now launched in all programs, in the Mod Settings there is an Application Whitelist, where you can specify applications where the screensaver will not start.
Added a list of applications in the Mod settings, where you can specify autostart after sleep.
Added equalizer ViperFX - you can watch the settings in the video
Changed Bluetooth Music app.
Applications Music, Radio, Video have been completely changed. You can install standard applications from the OEM application.
Video files can be played in the background.
Now when you switch on rear view camera the brightness is in creased up to maximum automatically
4 different types of radio apps have been added in the OEM app (including radio with Day and Night support)
Go to the OEM app and install the app from there.
3 different types of Music app have been added in the OEM app.
Split screen support (not all apps support)
Added online radio PCRadio
Mod settings - MOD Settings - System settings - added automatic screen brightness by GPS.
Supports 1280X720 and 1024X600 screen resolutions.
Added four customizable buttons to screensavers to launch your programs.
- Long press on the button - select the application.
- Short press on the button - start the application.
You can now configure the MODE button to launch your applications.
- Located in Mod Settings - MOD Settings - System Settings - Select applications to launch by pressing the MODE button.
- If it is disabled, the standard method of operation of the MODE button is used (launching Radio-Music-Video)
Added the ability to automatically adjust the sound based on GPS speed.
Located in Settings mod - MOD Settings - Sound settings - Auto volume control by GPS.
Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
Located in Mod Settings - MOD Settings - System Settings - Popup Settings.
Fixed GPS work.
- Improved location accuracy.
- With a cold start - satellites are located in 40-70 seconds.
- With a hot start (after sleep or reboot) - instantly.
Anyone who had problems with USB ports or missing WiFi - fixed.
USB and WiFi are initialized after the system is fully booted and after sleep.
New method and settings of the whitelist of programs to run after sleep (located in Mod Settings - Mod Settings - System Settings)
New whitelist for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
Redesigned Launcher with day and night support. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen
- Clock, GPS speed, Weather or choose to display your logo (download a logo on the Internet (for example, a BMW car logo),
in PNG format and preferably with a transparent background and copy the file to the device's internal memory)
If after updating the firmware, every time the system boots, the location permissions for the launcher are asked, go to Mod Settings - Mod Settings -
Launcher Settings - Launcher with day and night support and enable GPS speed display.
New graphic equalizer in Music and Screensaver apps, with four different graphic equalizers and color selection.
You can now set the time for showing music and radio notifications in Mod Settings from 1 to 10 seconds.
You can change the DPI of the screen. The range is from 260dpi to 160dpi (standard 220 by default) - I set it to 200dpi. Located - Mod Settings - Mod Settings - System Settings.
You can assign the launch of your applications to the buttons on the steering wheel or on the front panel of the device. Located in Mod Settings - Mod Settings - Car (as you select applications there, then assign buttons through the standard application, for setting the buttons on the steering wheel, for example). - you can watch the video on how to configure -
More flexible graphic equalizer settings are in Mod Settings - Mod Settings - Sound Settings.
Mod Settings - Mod Settings - Car - added GPS fix (enabled by default).
Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
Configurable rear camera parking lines, you need to go to Settings Mod – Car - related settings – Extra settings and enable 1-2-3 type of Rear view ruler.
EasyConnected has been updated to the latest version.
Many other fixes and additions.
Installing FULL firmware version:
You must download the LITE version, read the instructions inside the archive and be sure to install the LITE version on your device.
Download FULL version:
Installation only on LITE firmware version and only through online update. Download the LITE version and read the instructions inside the archive.
----------------------------------------------
Many thanks to the respected Graser from the 4PDA forum for invaluable help in creating the firmware!
+++++++++++++++++++++++++++++
This post is in edit mode! Errors and inaccuracies are possible!
Please excuse me in advance! I very rarely answer questions and do not use private messages!
Click to expand...
Click to collapse
Tried the update but won't recognize when my usb drive is inserted . I just updated to latest from Dasaita so I know it works what am I missing here ?
My pic uploads failed but I do have a PX6 MTCE HA 1280x720

thefunkygibbon said:
ok so i'm not entirely sure what the lite version actually consists of. I appreciate that it says a lot of things have been changed and added in the FULL version. But are we talking that the LITE version is just stock rom with a couple of launchers , root and a few other apps?
what rom is it actually based on or is it compiled from fresh?
is the lite version going to give me enough difference from stock 10 i have on my current unit in terms of speed, responsiveness and suchlike to make it worthwhile basically starting afresh?
bear in mind that i'm new to these devices and i've not installed any custom roms like this or hal9k on it before (plenty of experience with phones /tablets though)
Click to expand...
Click to collapse
Funky Did you get it to work ? I tried my unit does not recognise the update file on the Flash Drive , Also did you first go into recovery mode if you did?
Cheers

ToyotaJay said:
Funky Did you get it to work ? I tried my unit does not recognise the update file on the Flash Drive , Also did you first go into recovery mode if you did?
Cheers
Click to expand...
Click to collapse
hi, no i've not attempted to yet since part of me is reluctant to give money for the rom, from what i can tell the 'lite' version is not a lot different to stock so isn't indicative of the one that he wants you to pay money for. plus i'm not paying money when the guy rarely supports his 'product'.
waiting for hal9k's rom

Hello,
the rom is verdy good.
Thanks.
But the EQ is very poor.
Can we install the EQ from Hal9k v4 or from AAS?

Updating from an existing Android 10, I got a status 7 error when updating to lite - what am I possibly doing wrong ???

thefunkygibbon said:
ok so i'm not entirely sure what the lite version actually consists of. I appreciate that it says a lot of things have been changed and added in the FULL version. But are we talking that the LITE version is just stock rom with a couple of launchers , root and a few other apps?
what rom is it actually based on or is it compiled from fresh?
is the lite version going to give me enough difference from stock 10 i have on my current unit in terms of speed, responsiveness and suchlike to make it worthwhile basically starting afresh?
bear in mind that i'm new to these devices and i've not installed any custom roms like this or hal9k on it before (plenty of experience with phones /tablets though)
Click to expand...
Click to collapse
i have not tried this version as but i used the previous version
the lite release give you more futures than stock but it is not meant to be used full time it meant to be a test drive for this ROM before you pay anything
the money go to support the developer to help improve this ROM
The full release add soo many futures that you can not get on stock
---------- Post added at 12:10 PM ---------- Previous post was at 12:05 PM ----------
ToyotaJay said:
Funky Did you get it to work ? I tried my unit does not recognise the update file on the Flash Drive , Also did you first go into recovery mode if you did?
Cheers
Click to expand...
Click to collapse
Are coming from android 9 or 10?
For 10 it should work (but I have not tried)
For 9 you can not upgrade directly from 9 to 10 like that
you need a special method
in here
https://forum.xda-developers.com/an...nt/upgrade-method-to-android-version-t4132123

Deleted

FredFromBerks said:
Updating from an existing Android 10, I got a status 7 error when updating to lite - what am I possibly doing wrong ???
Click to expand...
Click to collapse
me too...status 7

omg this thing its real!!!

FredFromBerks said:
Updating from an existing Android 10, I got a status 7 error when updating to lite - what am I possibly doing wrong ???
Click to expand...
Click to collapse
I tried it too after rooting my head unit and I got the same error.

Al Ferro said:
I tried it too after rooting my head unit and I got the same error.
Click to expand...
Click to collapse
Same issue happens to me. I come from a rooted device on 10 but the reset to factory default, resets itself without root, therefore early root might not be the issue.

Px5 or px6
Hey Malaysk
I like you Rom. And installed your Rom in a previews device, made a contribution. But right now I have other device and I am a bit confused. Is it a a px5 or px6. It has an android 10.
Thanks

kalewsiukas said:
Hey Malaysk
I like you Rom. And installed your Rom in a previews device, made a contribution. But right now I have other device and I am a bit confused. Is it a a px5 or px6. It has an android 10.
Thanks
Click to expand...
Click to collapse
its neither. do NOT install this rom

thefunkygibbon said:
its neither. do NOT install this rom
Click to expand...
Click to collapse
thnx for the answer. is there any kind of the rom to update? because right now is a bit disgusting