SM-J410F cannot into download mode? - Samsung Galaxy J4+ Questions & Answers

Hello,
I have a problem, today I install the combination file to my SM-J410F Samsung device but it not work I get %80 and failed and write something (like custom binary fused ) but after that I want to download another Stock firmware but I noticed that it cannot into download mode and when I Press Vol up + power it only show the Samsung logo and turn off, I try many times but it's something.....
I also use jig USB to force the device to download mode but it doesn't work.
Please help me it's very important to me. I Appropriate your bits of help.

Hi,
I have J415 in hand and I believe you can follow these steps:
1. turn off the phone
2. hold vol up+ vol down and connect usb
you should be in download mode now.

mulencja said:
Hi,
I have J415 in hand and I believe you can follow these steps:
1. turn off the phone
2. hold vol up+ vol down and connect usb
you should be in download mode now.
Click to expand...
Click to collapse
I tried many times but it doesn't work.

Recovery
Plz i want link to twrp (recovery) of samsung j4 core (SM-J410f/ds)

I also have a this issue. Power & vol+ & vol- plug in USB, Samsung logo then a blue screen, possibly with an exclamation mark, but only for a split second. The reboots and does the same continuously. I was on android pie uk and tried to flash twrp, failed 3 times. Tried to reflash 8.1 which ended in a fail and now it won't boot, won't boot recovery and won't go into download mode. Does this mean a flat battery? Should I leave it on charge with no sign it's charging? Hold the 3 buttons on reboot for 5/10 minutes?
As it stands now, it's not bricked but I can't do anything with it.

I solved it by holding all 3 buttons and plugging into USB, it did the whole rebooting thing as usual but I kept the buttons held for about 15/20 reboots and then it FINALLY went into download and I could flash stock rom. If important or not, I'd left it charging all night but showed no sign of life whilst it 'charged'

have same problem same it is kind of security to avoid writing Combination

Related

stuck in android system recovery <2e>

i just flash the I9000JH1 to the phone ,i still havent install the kernel to the phone yet and it had boot the home page. and i follow the instruction to reflash again. with Odin3 after i will flashing the CSC and PDA file i unplug and restart the phone and i goes to android system recovery <2e> and i try to reboot but the power button not working....it said
sasung recovery utils
-for BML-
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
but i can use vol up and down to scroll up and down, but can select the item, the power button is not working.
down there had some yellow words
update media, please wait ...
update media, finished
#menu mode#
- Appling Multi-CSC...
installing Multi-CSC
that the only word it wrote, so wht can i do, is there had any method to reflash the thing??cuz the computer also cant recognize the phone, Thanks
hi ron
im just a noob but i have the same problem yesterday =)
u must flash an kaptivate kernel for a workung power button in the recovery menu!
http://forum.xda-developers.com/showthread.php?t=782413
but i cant even boot up the phone, it stuck in the recovery mode
ron671 said:
but i cant even boot up the phone, it stuck in the recovery mode
Click to expand...
Click to collapse
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
also, ADB commands should work while the phone is in recovery mode
Same Problem
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
rajendra82 said:
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
Click to expand...
Click to collapse
madetoservehim said:
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
Click to expand...
Click to collapse
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Response & Update
Have tried both of these options. Either way you do it, the phone still goes back into recovery mode. There was talk about using a custom kernel that would allow you to use the power button as the select button. Is there any way to use adb in recovery mode, so you can install the modified kernel, or reboot to download mode? If not, I started a thread on this question that can be found here as well:
rajendra82 said:
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Click to expand...
Click to collapse
Did you ever fix this? I'm stuck in recovery mode now and none of the button combinations work
I have the exact same problem. Have you had any luck figuring out how to get the phone to reboot?
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Pirateghost said:
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Click to expand...
Click to collapse
I am sure they can.
The 2e and 3e Download and Recovery modes were disabled by Samsung in later models of the SGS. It is not possible to get there using a combination of buttons etc.,
How to install the Download/Recovery Mode fix (3 Button Disabled SPL fix) http://forum.xda-developers.com/showthread.php?t=785201
There may be another method using an AnyWay JIG cable: which is a MicroB USB to Standard USB connector where I think one crosses pin 3 and 4 with a 301kOhm resister 1% tolerance, 1/4Watt. It would be best to search this forum for precise instructions.
Win for a dumb f%^k
well this isnt a good answer but i have a phone that went as discribed, no respose to three button, and unable to flash or get off the system reset screen on start up work on it for about 6 hour then left it when i came back i turned it on plug in the usb and CMD'ed adb reboot download and what did you know this time it worked? reset from that screen and it return to normal sooo.... um good luck and there is a way out just not shore what exactly it is
good for some
okey after fidling around i found my phone responded to adb ie download adb open a cmd line and typing adb reboot download. from there i just cycled the power hold down the power button a while and it rebooted to normal working order. though i still cant get 3 button even with flashing the fix so no hacking for me hope this helps
I'm using the Samsung Fascinate, i500 and i got stuck on the same screen too!!! i just double tapped the home button and rebooted the phone
I was able to get out of a 2e loop by running adb reboot download with odin open, then reflashed from there. Went through the same process twice since cognition 2.3b8 does not want to install on my phone. had no problem with b7 install.
Instructions were not that great. But Thanks -I figured it out and am back up.
Same problem here, cant make my phone go to download mode, ok or select key "power button" not working.
already tried the 2 methods before and they not working, (combination of keys)
Vibrant stuck in android system recovery 2e
I know this is not exact help but i just accidentally found myself into download mode after more key combo fiddling. I believe the last combo that got me in was either holding UP + POWER or just UP at the precise moment the screen goes black to reboot. This is after quite a few boot cycles so trial and error seemed to pull it off.
I'd test it again to be more sure but i don't want to risk being stuck again at this point. But I figured i'd speak up now, because i don't plan to have 2e there ever again.

Annoying issue with gt_p3113

Ok here is the deal..this tablet is about to erck me..as you can see its unplugged, 4 days and 3 chargers later I finally got it to boot up, now I have tried holding vol up plus power to goto either recovery/download mode..but nada. .refuses to go...when I hold down vol down plus power it only boots to safe mode. .pc doesn't recognize it at all..have tried several drivers. .turned on..turn off and nothing..what I want to do is try to get it in download mode so I can reflash it so hopefully it works properly. .also I get that annoying red X over battery when power on...any help would greatly be appreciated
Update. ..
OK I got it to charge at 100% even with the red X on the battery drained it at the way down plugged it to the wall and let at charge again to 100%. Any possible solutions to getting rid of the red X or getting it to boot in download mode?
Update #2 I plugged the tablet into the laptop for a few hrs while it was turned off, when I turned the tablet on the laptop finally picked it up and installed the necessary drivers...with that being said is there any way to force boot the tablet into odin/download mode via the laptop?
Try This...
mababer1 said:
Update #2 I plugged the tablet into the laptop for a few hrs while it was turned off, when I turned the tablet on the laptop finally picked it up and installed the necessary drivers...with that being said is there any way to force boot the tablet into odin/download mode via the laptop?
Click to expand...
Click to collapse
The tab should hit ODIN download mode when you hold the power button and the volume up (closest to the SD card access) key for 10 seconds. If not, download the ADB drivers from the Android SDK and see if you can issue a adb force reboot command to try and get it into recovery mode.
Can you point me in the right direction for using adb?
Hey nick I have adb installed if I type adb reboot - bootloader it only reboots the device back to the home screen .. any commands to try out to force it to download mode?
Adb reboot download brought the tablet ro a screen that says
Downloading. ...
Do not turn off target!!
I was able to then load odin and it's currently flashing everything back to normal
Yes, tablet differ, my tab 2 is first press right side of volume up for download mode (yours can be the left side), then after 2 sec press en hold simultaneously the power button until it asks if you want to continue to download mode. Release buttons and press other side of volume key to enter download mode. Than I would use odin to install recovery (TWR/CWM).

[Help] Galaxy S7 Bricked suddenly after boot to recovery mode

I would like to reset my S7 to factory in recovery mode.
However, after I pressed Volume Up, Home and Power buttons and wait for 10 seconds, an android robot was flash for 1 second only. After that, the screen turn off, a red light close to the camera, flash keep light up. I cannot boot up S7 again and no response when I connect it to PC.
What happen? Any solution?
Thanks
zckh said:
I would like to reset my S7 to factory in recovery mode.
However, after I pressed Volume Up, Home and Power buttons and wait for 10 seconds, an android robot was flash for 1 second only. After that, the screen turn off, a red light close to the camera, flash keep light up. I cannot boot up S7 again and no response when I connect it to PC.
What happen? Any solution?
Thanks
Click to expand...
Click to collapse
There are chance your recovey is damaged
You can try to boot recovey according to your phone from odin or flash firamware ( flashing firamware delete your data)
zckh said:
I would like to reset my S7 to factory in recovery mode.
However, after I pressed Volume Up, Home and Power buttons and wait for 10 seconds, an android robot was flash for 1 second only. After that, the screen turn off, a red light close to the camera, flash keep light up. I cannot boot up S7 again and no response when I connect it to PC.
What happen? Any solution?
Thanks
Click to expand...
Click to collapse
Well, I've got your same problem years ago. You should press Home+Power+Vol Up/Down when in Charge and wait to display the charging status.
After that, you could connect it and flash via Odin.
I've always format my Internal SD with Recovery (TWRP) once every two months. :good:
zSyntex said:
Well, I've got your same problem years ago. You should press Home+Power+Vol Up/Down when in Charge and wait to display the charging status.
After that, you could connect it and flash via Odin.
I've always format my Internal SD with Recovery (TWRP) once every two months. :good:
Click to expand...
Click to collapse
I don't rooted or flash with TWRP. I am just want to reset my S7 to factory by pressing Home + Vol Up + Power. I have try to press it again for a minute and wait and still got nothing.
May by I need to buy a USB jig to boot it to DOWNLOAD MODE
Thanks for your help
Adnightmare said:
There are chance your recovey is damaged
You can try to boot recovey according to your phone from odin or flash firamware ( flashing firamware delete your data)
Click to expand...
Click to collapse
No response for my S7, I cannot boot it to recovery mode nor download mode.
After waiting for 3 hours, the "RED" light gone (may be no battery) . It will light up again when I charge it.
There's no solution, and the easy step is to send it to a Samsung Centre. Don't try any hardmod operation

Samsung Galaxy A7 (2018) - No Download mode or Recovery and infinite bootloop

Hi,
Recently i was trying to apply another rom to my Samsung Galaxy A7 2018 edition and i am stuck in an infinite bootloop. I cannot enter download mode with the Volume Down and Power keys and the only thing it does is showing the logo of Samsung every 5 seconds and restarts. I have tried to built a usb jig with 300k resistors and still does not boot up in download mode to flash with odin a stock firmware. Also i left the battery to drain and now it is turned off,but when i plug in the usb cable and power it up it still goes into infinite loop. Any help?
I was trying the Android 10 Magisk root for A750F and was greeted by a similar situation after ODIN rebooted my phone after flashing Magisk image.. Anyways, don't panic, try all combination of buttons. vUP,vDN,PWR or vUP,PWR or vUP,vDWN while connected to usb.. It wasn't working for me too but i tried all combinations and it landed me to download mode where I flashed the stock rom
just press those button and connect to usb
im glad i read his, had just the same issue while flashing wrong twrp on A750FN .. yihey thx budies
how did you solve this issue.
---------- Post added at 06:54 AM ---------- Previous post was at 06:45 AM ----------
which button combination helped you. I having a similar issue. can not enter download mode.
Solution that helped me
Just Press the volume plus + volume minus + power button at once. Once the phone reboot black screen appears, Leave the power button and keep pressing the volume plus and volume minus button. It will redirect to the download mode. and reflash the room using Odin. Only use official sammobile rom file as other files may be corrupted. The issue may arise. The problem is in rom.
If any issue query me at : [email protected].
try this bro
Tantalord said:
Hi,
Recently i was trying to apply another rom to my Samsung Galaxy A7 2018 edition and i am stuck in an infinite bootloop. I cannot enter download mode with the Volume Down and Power keys and the only thing it does is showing the logo of Samsung every 5 seconds and restarts. I have tried to built a usb jig with 300k resistors and still does not boot up in download mode to flash with odin a stock firmware. Also i left the battery to drain and now it is turned off,but when i plug in the usb cable and power it up it still goes into infinite loop. Any help?
Click to expand...
Click to collapse
do one thing hold volume + and volume - buttons toggether and connect your phone to pc while holding v+ and v- buttons your phone redirect to download mode without any other logo/animation :good:
zebby12 said:
I was trying the Android 10 Magisk root for A750F and was greeted by a similar situation after ODIN rebooted my phone after flashing Magisk image.. Anyways, don't panic, try all combination of buttons. vUP,vDN,PWR or vUP,PWR or vUP,vDWN while connected to usb.. It wasn't working for me too but i tried all combinations and it landed me to download mode where I flashed the stock rom
Click to expand...
Click to collapse
icodix said:
just press those button and connect to usb
Click to expand...
Click to collapse
ikram.senguen said:
im glad i read his, had just the same issue while flashing wrong twrp on A750FN .. yihey thx budies
Click to expand...
Click to collapse
simonastani21 said:
Solution that helped me
Just Press the volume plus + volume minus + power button at once. Once the phone reboot black screen appears, Leave the power button and keep pressing the volume plus and volume minus button. It will redirect to the download mode. and reflash the room using Odin. Only use official sammobile rom file as other files may be corrupted. The issue may arise. The problem is in rom.
If any issue query me at : [email protected].
Click to expand...
Click to collapse
I have tried keeping all 3 buttons (vol up + vol down + power), tried holding vol up + vol down and then connecting to my PC (nothing happens, I always see the same screen (SAMSUNG Galaxy A7 Secured by Knox and Powered by android underneath)).
Tried vUP,vDN,PWR or vUP,PWR or vUP,vDWN while connected to PC via USB.
Tried vUP,vDN,PWR or vUP,PWR or vUP,vDWN while NOT connected to PC via USB.
Phone sometimes reboots but always gets into the screen I mentioned above.
Odin, obviously, doesn't see the phone either.
Also, adb devices command deosn't show the device in the list.
Anything else I should try?
Ah I solved it, and nobody mentions that you have to be SUPER quick!?
So you hold down vol down + power button and keep the USB cable at hand and the millisecond your phone reboots, reeeealy quickly release vol down and power and quickly afterwards press vol down + vol up and again quickly plug in your USB cable, if you did it before the Samsung logo appears you will get into Downloading... screen.
androidBanana said:
Ah I solved it, and nobody mentions that you have to be SUPER quick!?
So you hold down vol down + power button and keep the USB cable at hand and the millisecond your phone reboots, reeeealy quickly release vol down and power and quickly afterwards press vol down + vol up and again quickly plug in your USB cable, if you did it before the Samsung logo appears you will get into Downloading... screen.
Click to expand...
Click to collapse
haha nice. we have different procedures though.
simonastani21 said:
Solution that helped me
Just Press the volume plus + volume minus + power button at once. Once the phone reboot black screen appears, Leave the power button and keep pressing the volume plus and volume minus button. It will redirect to the download mode. and reflash the room using Odin. Only use official sammobile rom file as other files may be corrupted. The issue may arise. The problem is in rom.
If any issue query me at : [email protected].
Click to expand...
Click to collapse
doesn't work for me
Tantalord said:
Hi,
Recently i was trying to apply another rom to my Samsung Galaxy A7 2018 edition and i am stuck in an infinite bootloop. I cannot enter download mode with the Volume Down and Power keys and the only thing it does is showing the logo of Samsung every 5 seconds and restarts. I have tried to built a usb jig with 300k resistors and still does not boot up in download mode to flash with odin a stock firmware. Also i left the battery to drain and now it is turned off,but when i plug in the usb cable and power it up it still goes into infinite loop. Any help?
Click to expand...
Click to collapse
just plug it to ur pc while pressing vol up + down, works for me
sagar81307 said:
try this bro
do one thing hold volume + and volume - buttons toggether and connect your phone to pc while holding v+ and v- buttons your phone redirect to download mode without any other logo/animation :good:
Click to expand...
Click to collapse
Hello sir, I just want to thankyou alot this fixed my problem. I tried to install a android 13 gsi rom that I saw was compatible with my phone but the after I installed it had some bugs and I restarted my phone to go to download mode and flash a backup I had but the phone went into a bootloop with in to the recovery(i was using pbrp) and I couldnt get into download mode even to flash my stock rom. after I saw you post I tried it and it took me in to a screen that was saying you system has been corrupted and asked me if I wanted to go to download mode and said yes and flashed my rom and everything is working now
Thank you Again

Question my Galaxy A12 won't boot to android or download mode help me pls

so I just tried to install unofficial TWRP 3.5.0 on my Samsung galaxy a125m and everything went fine, Odin said done. Then I just tried to start TWRP by pressing power and vol up and it didn't start, so I thought I might have done something wrong and rebooted to download mode and flashed it again, Odin said done, then I unplugged the USB cable and now it won't boot, neither to the system or recovery, even to download mode, it did enter download mode a few times before but I pressed the wrong button and had to cancel and enter again, now it won't even enter download mode so I can't flash stock rom to fix bootloop... pls how can I solve this I'm desperate
when I try to enter download mode by pressing volume up + volume down it just shows up charging mode without any numbers, then it turn on and shows Samsung logo, unlocked bootloader warning screen, and the Samsung logo again, but then just restarts and repeats all again...
when I try to press volume up + volume down + power, nothing really happens...
someone help me please
You need to keep both volume up and down pressed, then plug in the charging cable. It should enter download mode, no need to press the power button like in older samsungs.
PhotonIce said:
You need to keep both volume up and down pressed, then plug in the charging cable. It should enter download mode, no need to press the power button like in older samsungs.
Click to expand...
Click to collapse
yeah I did that a lot of times, it used to work now It doesn't anymore
in this video you can see what's going on, I'm pressing both volume keys and nothing happens
Your browser is not able to display this video.
Is the cable plugged into a charger and on?
Have you considered that your volume buttons may not be working?
Same hear
Try attaching your phone to the PC, and then pressing volume down + power to reset the phone, (for about 7~8 seconds) then immediately press the volume down and up buttons, that's how I recovered from it. Tell me if it worked
juliano-oh! said:
Try attaching your phone to the PC, and then pressing volume down + power to reset the phone, (for about 7~8 seconds) then immediately press the volume down and up buttons, that's how I recovered from it. Tell me if it worked
Click to expand...
Click to collapse
Please help it dosent worked
No pc detection
No download mode
No recovery
No charging
Hello, unfortunately in these cases the only solution is to enter download mode, check if any button is damaged or if the cable works and if it is well connected, press the buttons harder, hold down the volume up and volume down buttons at the same time , by pressing the strong buttons, for about 6 seconds and then connect the cable. If you don't try another cable to see if that's the problem there is no other solution as the phone is not recognized by an app that can put it into download mode when turned off the solution is the one I already told you about. I hope you have fixed that problem. Sorry for my bad English.
developeMYWORLD said:
Please help it dosent worked
No pc detection
No download mode
No recovery
No charging
Click to expand...
Click to collapse
To Escape the Black Screen of Death or Bootloop
To boot to RECOVERY MODE
Method 1
First connect phone to the PC for 30 minutes
Hold all 3 keys and release volume down when it buzzes.
Method 2
1. Plug in USB cable to PC
2. Hold down all 3 buttons on phone.
3. When it buzzes release volume down and plug in USB cable to phone.
Then restore your backup or install a ROM
To boot to DOWNLOAD MODE
Method 1
First connect phone to the PC for 30 minutes
Hold all 3 keys and release power when it buzzes.
Method 2
1. Plug in USB cable to PC
2. Hold down all 3 buttons on phone.
3. When it buzzes release power button and plug in USB cable to phone.
Then use Odin to flash official firmware.
@physwizz
I am having a similar problem with the Samsung A12 SM-a125u
I never could enter into this "Downloading mode".
I tried flashing the stock ROM through ADB with fastboot, and I have another problem that I've never seen before: ADB can see the device while in recovery mode, but fastboot can't. And so it won't allow me to flash the ROM and I don't even know how Odin is supposed to help yet; I think I needed to enter Downloading mode for that, but I can't get into it.
I'm working on this phone for a friend who was given it because his friend's mom doesn't remember the password to it. Does that matter? It's worth noting that because of that I cannot get in to turn on OEM unlocking or dev mode, but idk why that would come into play in recovery mode. Also, the model indicates this is an AT&T phone, and tutorials online have acknowledged this model in their "applicable models" list at the beginning of their tutorials, but I know that carrier phones can cause problems all over the place (stop buying carrier locked phones people!); is this a problem?
How the heck do I flash the stock ROM to this this?

Categories

Resources