Related
Post 1: How to unlock your bootloader, flash a recovery and root
Post 2: How to flash a custom ROM and kernel (boot.img)
Post 3: How to reverse everything and go back to stock
Post 4: How to ADB Sideload a ROM
Alright. This is for everyone who wants to root their phone. I've seen MULTIPLE threads of the same question "Can I root my phone and How do I do it". So I hope I never have to see it again! In this tutorial, I use use my toolkit as the way to root. Doing it manually takes forever and that is why I made my toolkit.
Requirements:
HTC One S (charged to at least 70%)
Windows XP,Vista,7 (8 is not officially supported since I don't have the drivers)
USB cable
Ability to read and follow step-by-step
Understanding that I am no way guaranteeing anything. If you screw up your phone, you probably didn't follow my steps and made a foolish mistake.
Let's begin.
Download my toolkit from here.
Link 1 and Link 2
Extract the FOLDER to your C: drive or to your desktop.
MAKE SURE YOUR DIRECTORY DOES NOT HAVE A PERIOD OR SPACE.
Open One S.exe
So now you have my program open. Great.
On your phone, go to Settings -> Developer Options and Enable USB Debugging.
From my toolkit, Click 1. Install HTC Drivers.
After the drivers install, restart your computer.
After your computer loads up, open my toolkit and connect your phone to the computer. Your phone should now be recognized.
Now, click 2. Register at HTCDev. Register with a VALID email address and LEAVE the web browser open.
Now, under the commands section of my toolkit, press Boot into Bootloader.
You should have a nice, white, shiny screen that says FASTBOOT USB.
Click 3. Get Token ID. Look at the pop up and it will tell you how to get the Token ID.
Highlight where it says < < < < Identifier Token Start > > > > all the way to < < < < < Identifier Token End > > > > > and right click and it will automatically copy it.
Now, click Submit Token ID. Your web browser should now open a new tab. Scroll down and in the empty box, paste your Token ID. Press submit. HTCDev now emailed you your unlock token.
Your phone should still be in the bootloader. Now, go to the email address you registered to HTCDev and DOWNLOAD your unlock_code.bin. Press 5. Unlock Bootloader. Locate your unlock_code.bin and it will flash it to your phone.
READ the warning. THIS WILL WIPE ALL YOUR DATA FROM THE PHONE.
When you agree to it, press the volume up button and press the power button to accept it. Your phone will now restart.
When your phone loads up, go through the set up wizard. Then, on your phone, go to Settings -> Developer Options and Enable USB Debugging.
Under the Extras section, press Perm Root. It will push SuperSU.zip to your phone.
Now, it is time to flash a recovery. The custom recovery is for 2 different devices
TWRP (Team Win Recovery Project) is a custom recovery that will allow you to flash custom ROMs, Mods, etc.
If your phone is the S3 model, then flash the one that says TWRP (S3)
If your phone is the S4 model, then flash the one that says TWRP (S4)
If your phone is the special edition 64Gb model, then flash the one that says TWRP (Special Edition)
After it flashes, remove the USB cable and have HBOOT selected in bootloader. Press the power button and it will reload to another screen. Press the Volume Down button until you get to Recovery. Press the power button to select it.
Go to Backup and back up your boot and system partition. Always have a back up before you flash or do anything.
After that, go to Install and locate SuperSU.zip. Click it and slide the screen on the bottom to flash it. After it flashes, reboot the phone.
In your app drawer (your menu with all the apps), open SuperSU. If it says the binary needs to be updated, then update it. If it doesn't, then you are fully rooted!
Post 2: How to flash a custom ROM and kernel (boot.img)
The fun part! Now, I will teach you how to flash a ROM and boot.img
Find a ROM you like, the first thing you should do is make sure it is COMPATIBLE with your phone. If you find a ROM that is for AT&T and you have the International model, don't be an idiot and flash it. I will not help you with that since you already agreed to my warning from the first post.
S3 ROMs don't work on S4 models and vice versa.
Also, DO NOT ASK IF YOU CAN FLASH A ROM FROM ANOTHER DEVICE!
Will it work? NO! Will it ever work? NO! Can I flash it anyways? Brick your device, I don't care. I warned you.
Let's get back on task. So you found the ROM you want to try, so go ahead and download it. KEEP THE THREAD OPEN! MAKE SURE YOU READ EVERYTHING AND REREAD IT AGAIN! READ WHAT USERS SAID ABOUT IT AND ABOUT BUGS! GO AHEAD AND READ THE WHOLE ENTIRE THREAD! GAIN KNOWLEDGE!!
Connect your USB cable to your phone. View the folders on your phone. I like to make a folder called ROMs on my phone and transfer it in there.
After you transfer it, open my toolkit and press Boot into Recovery. When you are in TWRP, MAKE A BACKUP!!!
After you make a backup AKA a Nandroid, click Wipe. Wipe Cache, Dalvik, Factory Reset and System. NOTHING ELSE! If you click anything else, IT WILL WIPE YOUR SD CARD AND YOU WILL HAVE MORE ISSUES ON YOUR HEAD!
So you wiped everything. Great. Your phone is ROMless, Yay!
Now go back and press install. Go to the folder where the ROM you downloaded, is located in. Select the ROM and slide the screen to flash it. After it flashes, press the back button. Press Reboot and Reboot into bootloader. Open the ROM you downloaded from your computer. You should see boot.img. Extract it to your computer. Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it.
After it flashes, press reboot from the phone.
Congrats! Enjoy your fully working or borked ROM! Remember, DO NOT ASK FOR ETAs, DO NOT BUG/PM A DEV ABOUT UPDATES, and BE RESPECTFUL TO THE DEVELOPERS!
Post 3: How to reverse everything and go back to stock
Now, let's talk about getting back to stock. There are 2 ways to do this.
1. Flash the stock RUU (If available) (Recommended)
2. Restore your Nandroid (backup that I told you to make earlier)
1. I'll talk about flashing the stock RUU first.
Open up my toolkit and press "Factory RUU" from the links sections. I usually have the most updated RUUs that Football releases on my Dev-Host account. Download the correct RUU for your phone.
Now, back up all your data (pictures, contacts, etc) since this will put your phone back to complete stock.
Connect the USB cable to your phone.
Press Relock bootloader. It may give you a security warning error or it may say failed. Who cares, ignore it. It's normal.
Your phone will boot up normally.
When the phone is fully loaded. Unplug and replug the USB cable back in the phone. Now,run the RUU you downloaded and follow the instructions.
Your phone will be back to stock.
2. Now, we will talk about restoring your nandroid backup.
Connect your phone to the computer. Open up the folder to view the files on your phone.
From your computer, Go to TWRP -> BACKUPS -> (Your hardware Serial Number) -> (Folder you wish to restore to) -> and copy boot.emmc.win to your computer. Rename boot..emmc.win to boot.img
Open my toolkit and press boot into recovery.
Click Wipe. Wipe Cache, Dalvik, Factory Reset and System. NOTHING ELSE! If you click anything else, IT WILL WIPE YOUR SD CARD AND YOU WILL HAVE MORE ISSUES ON YOUR HEAD!
Press back and press Restore. Choose the backup to restore to.
After it finishes, press the back button. Press Reboot and select bootloader.
Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it.
You are now back to your stock Nandroid.
4. How to use ADB Sideload
You may have seen what ADB Sideload around the forums but have no idea what it is. Since the HTC One S does not have an SD card, it makes things harder when you have to flash a ROM.
Here's a scenario when we need to use ADB Sideload.
1. You accidentally wiped your internal SD and have no ROM on your phone
2. You wiped your ROM and forgot to transfer a custom ROM/have no backups(Nandroid) available.
3, You have none of the above and there is no available RUU for your phone. <----- This is a real bummer.
Here are the steps to load on a ROM
I placed TWRP in my toolkit for a reason. CWM does not support ADB Sideload (as far as I know) and TWRP does.
Boot into recovery manually. Turn your device off and hold the VOLUME DOWN + POWER button together until the BOOTLOADER pops up. Press the VOLUME DOWN button until you have selected RECOVERY. Press the POWER button to get into RECOVERY.
Connect the USB Cable to your phone and computer.
In TWRP, click "Advanced" and select ADB Sideload.
Download a ROM to your computer (if you haven't already done so). Rename it as one word. For example CM10.zip, QX.zip, ARHD.zip, etc.
In my toolkit, under the extras section, press ADB Sideload a ROM. Press "Yes" when it asks you if you are in recovery. Then select the ROM you want to install. It will then sideload it to your phone and flash it.
After it finishes, press the back button. Press Reboot and select bootloader.
Pull the boot.img from the zip file and extract it.
Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it.
You now have a ROM on your phone!
Nice guide for new users
Sent from my HTC One S using xda premium
This should replace all the other guides.
hasoon2000 said:
Post 3: How to reverse everything and go back to stock
Click to expand...
Click to collapse
So when you reverse everything you loose your root access? I ask because let's say I want to root, but wish to stay stock, and than an OTA comes out for T Mobile. I would reverse everything do an OTA ?
carpetmaven2000 said:
So when you reverse everything you loose your root access? I ask because let's say I want to root, but wish to stay stock, and than an OTA comes out for T Mobile. I would reverse everything do an OTA ?
Click to expand...
Click to collapse
You need to flash back the stock recovery to run the OTA but you may have to root it again.
hasoon2000 said:
Post 3: How to reverse everything and go back to stock
Now, let's talk about getting back to stock. There are 2 ways to do this.
1. Flash the stock RUU (If available) (Recommended)
2. Restore your Nandroid (backup that I told you to make earlier)
1. I'll talk about flashing the stock RUU first.
Open up my toolkit and press "Factory RUU" from the links sections. I usually have the most updated RUUs that Football releases on my Dev-Host account. Download the correct RUU for your phone.
Now, back up all your data (pictures, contacts, etc) since this will put your phone back to complete stock.
Connect the USB cable to your phone.
Press Relock bootloader. It may give you a security warning error or it may say failed. Who cares, ignore it. It's normal.
Your phone will boot up normally.
When the phone is fully loaded. Unplug and replug the USB cable back in the phone. Now,run the RUU you downloaded and follow the instructions.
Your phone will be back to stock.
2. Now, we will talk about restoring your nandroid backup.
Connect your phone to the computer. Open up the folder to view the files on your phone.
From your computer, Go to TWRP -> BACKUPS -> (Your hardware Serial Number) -> (Folder you wish to restore to) -> and copy boot.emmc.win to your computer. Rename boot..emmc.win to boot.img
Open my toolkit and press boot into recovery.
Click Wipe. Wipe Cache, Dalvik, Factory Reset and System. NOTHING ELSE! If you click anything else, IT WILL WIPE YOUR SD CARD AND YOU WILL HAVE MORE ISSUES ON YOUR HEAD!
Press back and press Restore. Choose the backup to restore to.
After it finishes, press the back button. Press Reboot and select bootloader.
Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it.
You are now back to your stock Nandroid.
Click to expand...
Click to collapse
I am restoring from my Nandroid... when I get to the end and press reboot select bootloader.... when it reboots it does not go to bootloader, just the white HTC screen, and now I cannot flash the Kernel... what do I need to do to fix this?
carpetmaven2000 said:
I am restoring from my Nandroid... when I get to the end and press reboot select bootloader.... when it reboots it does not go to bootloader, just the white HTC screen, and now I cannot flash the Kernel... what do I need to do to fix this?
Click to expand...
Click to collapse
Hold Vol- as you turn it on should get you into bootloader.
Darknites said:
Hold Vol- as you turn it on should get you into bootloader.
Click to expand...
Click to collapse
Problem solved. A combination of working a 24hr straight shift and messing with my phone just didn't work right.... But got it up and running!
hasoon2000 said:
Click 3. Get Token ID. Look at the pop up and it will tell you how to get the Token ID.
Highlight where it says < < < < Identifier Token Start > > > > all the way to < < < < < Identifier Token End > > > > > and right click and it will automatically copy it.
[END QUOTE]
Hopefully this post goes correctly, it's my first post on here. I have the T-Mobile HTC One S. Whenever I get to this step it says there is no internal or external command for 'fastboot', and in another post, you had stated that it should be 1 word for the command prompt, which all of mine are, and it continues to do the same thing, and unfortunately, the all in one kit wont take me to the bootloader. It tries to do it, but then I get the phone with the red triangle with the exclamation point on it. I have to manually get it to bootloader, the command in the tool in one kit wont do it either. Please Advise. Thank you.
Click to expand...
Click to collapse
Cannot update binaries for SuperSU
Hi thanks so much for the guide. Followed all your steps and went hassle free. When launching SuperSU, its saying installation failed for updating binaries. Any ideas?
Thnks, helped a lot in flashing my first htc rom
If i accidentaly deleted my TWRP backup and i dont have RUU. What should i do to get back my stock rom
Can i root my one s without unlocking bootloader? Just bought one... Thx
Sent from my HTC One S using xda app-developers app
lolipop91 said:
If i accidentaly deleted my TWRP backup and i dont have RUU. What should i do to get back my stock rom
Click to expand...
Click to collapse
Flash an RUU.
OzGurKan said:
Can i root my one s without unlocking bootloader? Just bought one... Thx
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
No.
Sent From My HTC Amaze 4G via Someone's Room
I'm having trouble, it will not let me boot to bootloader. i did download the drivers.
Help?
newbie here... I'm running windows vista, dled your prog and followed all the necessary steps. I selected the debugging option, and when I try to "boot into bootloader" it opens a cmd.exe window.
AW: [HOW TO] Unlock bootloader, Root, Flash Custom ROM, Flash Kernel
Nice Instructions, perfekt.
Greetz from xxxvale46xxx
As there seems to be no such guide yet and it took me quite a while to get all this information together, I thought of giving back something by putting information together for others to start.
This guide is meant for the CLT-L29 (dual SIM). Rebranding and switching your CLT-L09 (single SIM) to dual is not subject of this guide and is not adviced.
This is for a Huawei P20 Pro CLT-L29 with factory reset. Please bear with me if there really is a step missing as I try to reproduce this for the documentation with an already bootloader unlocked and previously rooted phone (root should be gone after [factory] resetting via eRecovery).
A collection of all tools used can be found here.
As always, you are doing this on your own risk, no one else can be held responsible for this.
Cheat sheet
eRecovery
The recovery sitting in the "recovery" partition. eRecovery is Huawei's recovery that is able to fix your phone by downloading the latest OTA update via WiFi if you got stuck in a boot loop for several reasons.
To boot into eRecovery:
Power down your phone (if you are stuck in a boot loop simply continue with the next step).
Hold volume up until you end up in eRecovery.
Setup your WiFi access and let it recover your phone.
If unsure, "wipe data/factory reset" to get rid of any leftovers you messed up.
Reboot and be happy that you have not fully bricked your phone.
TWRP
The recovery typically flashed to the "recovery_ramdisk" partition. TeamWin Recovery Project is what you typically use to flash ROMs, to root the phone and to install OTA updates.
Do NOT flash TWRP into "recovery" partition or you will lose eRecovery and the ability to easily recover your semi-bricked phone via WiFi!
To boot into TWRP (once flashed):
Power down your phone (if you are stuck in a boot loop simply continue with the next step).
Hold volume up and power until you end up in TWRP.
Unlock your bootloader
Get your bootloader unlock code from here https://emui.huawei.com/en/unlock_detail (available until mid of July I think). Some report to have to wait 24/48h to get their code via mail, I got mine directly.
Register via mail and do not get confused that you can not select USA or Germany or whatever country, simply use location Hong Kong.
Make sure you select "EMUI above 5.0" when entering your phone data (P20 Pro comes with EMUI 8.x).
Connect your phone via ADB. There are tons of HowTos about this, so I will not be covering this here.
Use Tool All In One to check that you can talk to your device via ADB. It will also help you installing the correct ADB USB drivers.
Unlock your bootloader using Tool All In One.
Reboot back into system.
Flash TWRP
Make sure no lock screen or other locking is set:
"Settings > Security": Remove fingerprint, face or password locking, simply set to none.
Enter developer mode, should already been done for unlocking the bootloader.
Setting > System > Developer options: Disable the display lock.
Download latest ADB & Fastboot as I will continue with the rest on command line.
Verify connection to your phone with "adb devices", this should list your phone.
Reboot into fastboot by using "adb reboot bootloader".
Verify connection to your phone with "fastboot devices", this should list your phone.
Flash TWRP by Pretoriano80 with "fastboot flash recovery_ramdisk twrp_clt_0.1.img". This TWRP is able to access the encrypted internal storage! TWRP is flashed to "recovery_ramdisk". This ensures that you can still access eRecovery if something goes wrong.
Remove the USB cable.
Reboot into TWRP. If you do not boot directly into TWRP the Huawei eRecovery might replace TWRP again. Once you booted into TWRP you are fine for future reboots.
Use "Keep Read Only" for the system partition.
Make a backup!!!
Backup your phone to internal storage (USB stick via USB-OTG adapter failed for me):
Select "Backup".
Tick all partitions (scroll down and tick all).
Swipe to Backup.
Select "Reboot System", "Do Not Install".
Back in Android make a copy of your backup located in your internal storage "/TWRP/" to an external location like your PC. Keep the backup on your phone to be able to go back quickly to this point via TWRP.
Root the stock ROM
Place "Magisk-v16.4-Beta.zip" onto the internal storage.
Power off the phone and remove the USB cable.
Boot into TWRP.
Install root and Magisk Manager:
Select "Install".
Select "Magisk-v16.4-Beta.zip"
Tick "Reboot after installation is complete".
Swipe to confirm Flash.
Select "Do Not Install".
Back in Android start "Magisk Manager" and check that it is green and therefore rooted.
Install an OTA (Over The Air) stock update
PC method
Method involving ADB based on this guide.
First make sure no OTA update gets installed automatically as this will end up in booting into TWRP and failing with the update.
Go to "Settings > System > System Update".
Open the three dots menu on the top right and select "Update Settings".
Disable automatic update download via WiFi as once updates are downloaded the phone will bug you to update and maybe tries to update itself during the night!
Start in Android but do not download the OTA update yet.
Verify connection to your phone with "adb devices", this should list your phone.
Reboot into fastboot by using "adb reboot bootloader".
Verify connection to your phone with "fastboot devices", this should list your phone.
Flash "recovery_ramdisk_nocheckP20.img" with "fastboot flash recovery_ramdisk recovery_ramdisk_nocheckP20.img". For official OTA updates that you would regularly get, the "nocheck" feature should not be needed but does not harm. This will remove TWRP and you have to flash it again after the OTA update has finished.
Reboot into Android by using "fastboot reboot".
Remove the USB cable.
Download your OTA update via "Settings > System > System Update".
Let the phone reboot to install the OTA update and follow the update until you are back in Android with your new firmware version.
Install TWRP and root again.
Standalone method
Deprecated/wrong method based on this guide.
Read first!!!
While this method should do no harm it will only ever update to CLT-L29 8.1.0.128a(C432) [hw/eu] as this is what is inside the file "update.zip" that you can currently download and that gets installed by "HuRUpdater_0.3.zip" in the same folder. This was not clearly explained in the source thread, therefore sorry about this wrong information. If you intend to update to this stock ROM continue, otherwise use the "PC method".
I will check about the best way to install OTA updates without PC interaction in the next couple of days (currently waiting for 130+ getting rolled out for me for some investigations regarding the OTA process).
First make sure no OTA update gets installed automatically as this will end up in booting into TWRP and failing with the update.
Go to "Settings > System > System Update".
Open the three dots menu on the top right and select "Update Settings".
Disable automatic update download via WiFi as once updates are downloaded the phone will bug you to update and maybe tries to update itself during the night!
Place the following files into a folder on the internal storage (for sure not all are required but this is part of the little information not clear right now):
"HuRUpdater_0.3.zip"
"recovery.img"
"update.zip"
"update_all_hw.zip"
"update_data_public.zip"
Go to "Settings > System > System Update" and check for an update.
Download the OTA update.
Do not reboot when prompted.
Make sure no lock screen or other locking is set:
"Settings > Security": Remove fingerprint, face or password locking, simply set to none.
Enter developer mode, should already been done for unlocking the bootloader.
Setting > System > Developer options: Disable the display lock.
Power down the phone.
Boot into TWRP.
Install "HuRUpdater_0.3.zip". Do not get irritated if it tells you it is for CLT-L09 instead of CLT-L29, everything is fine.
Wipe dalvik cache before rebooting.
Reboot back into Android.
Check "Magisk Manager" to see if root got removed. TWRP might get removed as well. If TWRP or root got removed, repeat the install for one or both like before.
In my case only root got removed but TWRP was kept functional. If this is the case for you as well, simply flash "Magisk-v16.4-Beta.zip" via TWRP again.
Changelog
2018-06-21
Updated/corrected wrong information collected about installing OTA updates standalone (without PC). Until further notice use the PC method.
Great post. Thank you
Very good post!
Thank you to collect all this important info!
[emoji481]
P20 Pro & Tapatalk
can i use your step above to rebranding from L29c636 to l29c432? Thanks
Barcovn said:
can i use your step above to rebranding from L29c636 to l29c432? Thanks
Click to expand...
Click to collapse
Not sure, not tested and not topic of this thread.
For my understanding, why do you want to rebrand it to C432 which is the region code as far as I understand.
Is there a BIG benefit of getting OTA updates earlier or why do you want to mess around with it ?
Xcelsior said:
Not sure, not tested and not topic of this thread.
For my understanding, why do you want to rebrand it to C432 which is the region code as far as I understand.
Is there a BIG benefit of getting OTA updates earlier or why do you want to mess around with it ?
Click to expand...
Click to collapse
yes, i mean change the region code. as i use the p20 pro since April, newer firmware ususal fix/improve performance for phone or camera. however it seem the c636 update is much slower then C432. currently i have problem with facebook lagging which inhope newer firmware fix it
This is good! I'll sticky it when I get a chance later tonight. I'm mobile atm
Maybe I'm missing something.
https://forum.xda-developers.com/hu...de-how-to-root-debrand-remove-retail-t3788326
It's been here for some time.
Nothing wrong with your guide it's decent but the info provided is actually already here mate.
Root, twrp, de-brand, OTA, it's all there
dladz said:
Maybe I'm missing something.
https://forum.xda-developers.com/hu...de-how-to-root-debrand-remove-retail-t3788326
It's been here for some time.
Nothing wrong with your guide it's decent but the info provided is actually already here mate.
Root, twrp, de-brand, OTA, it's all there
Click to expand...
Click to collapse
They're a bit different. The debrand thread is obviously good but much more specific to debranding. This is a more generic for general How-To's
dladz said:
Maybe I'm missing something.
https://forum.xda-developers.com/hu...de-how-to-root-debrand-remove-retail-t3788326
It's been here for some time.
Nothing wrong with your guide it's decent but the info provided is actually already here mate.
Root, twrp, de-brand, OTA, it's all there
Click to expand...
Click to collapse
I was reading this one as well but like matt4321 already said, it is actually for a different purpose.
And even the "ROOT ONLY" instructions are either widespread over the whole P20 Pro forum, incomplete or even outdated:
Linking to other threads with endless, partly revised instructions (on page n of the thread).
Referring to wrong official TWRP that can not use internal storage.
Hard to understand for beginners on this device (not even talking about someone who is entirely new to all of this).
Missing steps or expecting that you have already successfully flashed your first ROM (talking about advanced things like rebranding).
Don't get me wong, I am used to read a lot when it comes to custom ROMs (if you check the old part of my signature you can see that I am not actually a newbie here and my roots actually reach back to when all of the Android stuff startet at all, back when XDAs flashed HTC HD2 WinMo to Android). However I really missed a guide that actually collects all the basic information for beginners without going off roads too early.
These are more or less the steps I'm used to when I owned my nexus phones.
I have some questions:
If I root my phone and install, let's say adaway, will I be able to receive OTA? Or I will have to flash a new image manually?
If after root I relock bootloader, will I be able to unlock it again later for further modding?
This method implies that I can return to stock anytime and relock bootloader?
Thanks for the guide and answers , great job
mangusZen said:
If I root my phone and install, let's say adaway, will I be able to receive OTA? Or I will have to flash a new image manually?
Click to expand...
Click to collapse
Yes, exactly what I am doing. I need root for some apps and besides that I am happy with the stock OTA ROM, at least for the moment. OTA updates work fine so far.
The only thing as explained in my guide is that OTA updates will fail as they boot into TWRP instead of original fastboot. Therefore you need to explicitly boot into TWRP and install the downloaded OTA update with "HuRUpdater_0.3.zip".
mangusZen said:
If after root I relock bootloader, will I be able to unlock it again later for further modding?
Click to expand...
Click to collapse
From what I have read so far re-locking your bootloader is not advised. You seem to be unable to unlock it again or at least need to request another unlock code from Huawei.
At least this is my understanding of the situation so far.
mangusZen said:
This method implies that I can return to stock anytime and relock bootloader?
Click to expand...
Click to collapse
Returning to stock is even easier if you keep eRecovery working as explained in the guide (flashing TWRP only to recovery_ramdisk partition). With eRecovery you can wipe TWRP and root and let eRecovery download and install the latest official stock ROM.
Regarding the bootloader re-locking, see my answer above.
Xcelsior said:
Yes, exactly what I am doing. I need root for some apps and besides that I am happy with the stock OTA ROM, at least for the moment. OTA updates work fine so far.
The only thing as explained in my guide is that OTA updates will fail as they boot into TWRP instead of original fastboot. Therefore you need to explicitly boot into TWRP and install the downloaded OTA update with "HuRUpdater_0.3.zip".
From what I have read so far re-locking your bootloader is not advised. You seem to be unable to unlock it again or at least need to request another unlock code from Huawei.
At least this is my understanding of the situation so far.
Returning to stock is even easier if you keep eRecovery working as explained in the guide (flashing TWRP only to recovery_ramdisk partition). With eRecovery you can wipe TWRP and root and let eRecovery download and install the latest official stock ROM.
Regarding the bootloader re-locking, see my answer above.
Click to expand...
Click to collapse
Ok, so to install OTA I have to use hurupdater method and flash the OTA package manually.
For what I read and understood, but I may be wrong, the problem with relocking bootloader is encountered by who used the funkyhuawei method, that alters bootloader in some way, especially to achive the mono sim - dual sim switch.
With this you cant for now re unlock the bootloader again.
But I could be wrong and be like that for everyone, will see if someone will come up with some clarifications.
It would be nice to have the ability to return to stock, lock bootloader and use warranty
[emoji14]
Thanks for your work and answers
mangusZen said:
Ok, so to install OTA I have to use hurupdater method and flash the OTA package manually.
Click to expand...
Click to collapse
Yes, that is basically what "HuRUpdater_0.3.zip" will do, it will flash/install an OTA update that has previously been downloaded.
Wipe cache afterwards and be happy with your new up to date stock ROM version.
Xcelsior said:
Yes, that is basically what "HuRUpdater_0.3.zip" will do, it will flash/install an OTA update that has previously been downloaded.
Wipe cache afterwards and be happy with your new up to date stock ROM version.
Click to expand...
Click to collapse
I have to rename the downloaded OTA packages for huru to work, right?
mangusZen said:
I have to rename the downloaded OTA packages for huru to work, right?
Click to expand...
Click to collapse
Not for me. Just downloaded the OTA update via the EMUI system menu in Android, rebooted into TWRP and installed (aka executed) HuRu.
HuRu did the rest for me.
Tested with 120 -> 128 OTA update.
Hi It is late at night and I am not sure if I typed fastboot flash recovery twrp_clt_0.1.img instead off fastboot flash recovery_ramdisk twrp_clt_0.1.img. How can I make sure I still have erecovery? super newbie to android rooting, please help Thank you
Amowiel said:
Hi It is late at night and I am not sure if I typed fastboot flash recovery twrp_clt_0.1.img instead off fastboot flash recovery_ramdisk twrp_clt_0.1.img. How can I make sure I still have erecovery? super newbie to android rooting, please help Thank you
Click to expand...
Click to collapse
Simplest way would be to try to boot into eRocovery:
Power off the phone.
Power on the phone until you see the "you are a baddy because you unlocked your bootloader" screen.
Hold volume up (you can already hold it when powering on the phone) until you end up in eRecovery or TWRP.
If you end up in TWRP it should still be possible to recover your eRecovery with a proper backup of the "recovery" partition from any other P20 Pro.
Xcelsior said:
Simplest way would be to try to boot into eRocovery:
Power off the phone.
Power on the phone until you see the "you are a baddy because you unlocked your bootloader" screen.
Hold volume up (you can already hold it when powering on the phone) until you end up in eRecovery or TWRP.
If you end up in TWRP it should still be possible to recover your eRecovery with a proper backup of the "recovery" partition from any other P20 Pro.
Click to expand...
Click to collapse
thank you so much for such a quick reply, can confirm that my brain was not so fried and I didn't wipe my ercovery
thank you for your amazing guide, everything worked perfectly
mangusZen said:
Ok, so to install OTA I have to use hurupdater method and flash the OTA package manually.
For what I read and understood, but I may be wrong, the problem with relocking bootloader is encountered by who used the funkyhuawei method, that alters bootloader in some way, especially to achive the mono sim - dual sim switch.
With this you cant for now re unlock the bootloader again.
But I could be wrong and be like that for everyone, will see if someone will come up with some clarifications.
It would be nice to have the ability to return to stock, lock bootloader and use warranty
[emoji14]
Thanks for your work and answers
Click to expand...
Click to collapse
Actually you don't in some cases, if your simply rooted with twrp and you want to install an OTA that's been advertised to your device. All you need to do is install the nocheck recovery IMG and then take the update, reinstall twrp and magisk after the update and you're done.
If it's an update that's not advertised to your device yet then hur updater is the way.
Root Guide
** Root will void the warranty and disable OTA updates **
boot.img patch method
I don't recommend updating the firmware OTA before rooting. There is a chance you will update your phone to a firmware that hasn't been released yet on the ASUS website. New updates are released OTA first and then about a week or two later they are posted on the ASUS website. If by chance you updated the firmware OTA and the firmware isn't on the ASUS website, you'll have to wait for the firmware to be posted before you can root.
If already rooted and updating firmware skip to 5b
1. Make a folder called ROG Phone to store all files needed
2. Download the following to the ROG Phone folder
-- Unlock Tool, aka Unlock Device App
---- https://dlcdnets.asus.com/pub/ASUS/..._SIGNED_UnlockTool_9.1.0.7_180912_fulldpi.apk
-- Latest Firmware - Under Firmware click on See All Downloads | Look at version number, not dates
---- Match SKU/Region - Example: WW->WW, CN->CN, JP->JP
------ Settings > System > About phone > Software information
-------- https://www.asus.com/us/Phone/ROG-Phone/HelpDesk_BIOS/
-- Minimal ADB and Fastboot - Portable
---- https://devsjournal.com/download-minimal-adb-fastboot-tool.html
-- Payload Dumper
---- Attatched image_extrator.zip script
-- Python
---- https://www.python.org/downloads/
-- Magisk Manager
---- https://github.com/topjohnwu/Magisk/releases
3. Unlock bootloader
-- Connect the phone to the PC via the side port on your phone
-- Select USB File Transfer on the phone; If problems connecting, update drivers on the PC
-- Copy the Unlock Tool to your phone's Downloads folder
-- This voids the warranty and disables OTA updates
-- This will force a factory reset, so backup your data
-- Use File Manager (in ASUS folder) on your phone to run the Unlock Tool from the Downloads folder
-- If asked for Pin select "Use your Google account" in white text (can't see) below the Pin request
---- Pin request YouTube: https://www.youtube.com/watch?v=aPKAEGptfas
4. Enable Developer on the phone
-- Settings > System > About phone > Software information
---- Tap "Build number" 7 times
5. Update phone to latest downloadable firmware
-- 5a
-- Open the ROG Phone folder and enable view file extensions
---- File > Change folder and search options > Click View tab > Uncheck Hide extensions for known file types > Click OK
-- Unzip Minimal ADB and Fastboot - Portable file
-- 5b
-- Copy the firmware to the Minimal ADB and Fastboot folder and rename firmware.zip
-- Turn on USB debugging
---- Settings > System > Developer options
------ Enable "USB debugging"
-- Connect the phone to the PC via the side port on your phone
-- Select USB debugging on your phone.
-- From the Minimal ADB and Fastboot folder run cmd-here.exe
-- From the command prompt (black window) type the following:
adb devices
-- To check the connection
adb reboot recovery
-- Select ADB on phone
adb sideload firmware.zip
-- Check that your phone was updated to the latest firmware
---- Settings > System > About phone > Software information
If by chance adb sideload doesn't work, try copying the firmware to the root directory (folder) on the phone and then reboot to install. Don't change the name of the firmware while using this method and you can't skip updates. So if there are two updates out from your current version, you'll have to install both.
6. Extract the boot.img file from the firmware using Payload Dumper
-- Use the attached image extractor script
---- Requires Python; Look at readme.txt
7. Patch boot.img using Magisk Manager
** Make sure that boot.img is from the same firmware version that is on the phone **
-- Turn off USB debugging
---- Settings > System > Developer options
------ Disable "USB debugging"
-- Connect the phone to the PC via the side port on your phone
-- Select USB File Transfer on the phone
-- Copy Magisk Manager and boot.img to your phone's Downloads folder
-- Use File Manager (in ASUS folder) on your phone to run Magisk Manager from the Downloads folder
---- Magisk Manager requires access to the Internet via wifi or mobile network
-- More Information
---- https://www.google.com/search?q=How...Methods)&ie=utf-8&oe=utf-8&client=firefox-b-1
------ Look at Method 2
-- Copy patched_boot.img from the phone's Downloads folder to the Minimal ADB and Fastboot folder
8. Flash patched_boot.img
** Make sure that patched_boot.img is from the same firmware version that is on the phone **
-- Put phone into fastboot mode
---- While the phone is off, hold down volume up and power buttons
-- Connect the phone to the PC via the side port on your phone
-- From the Minimal ADB and Fastboot folder run cmd-here.exe
-- From the command prompt (black window) type the following:
fastboot devices
-- To check the connection
fastboot flash boot patched_boot.img
fastboot reboot
--------------------------------------------------------------------------------
Some users couldn't get a connection to a PC via a PC's Type-C USB port and had to use a Type-C to Type-A USB cable.
https://www.amazon.com/gp/product/B...00__o00_s00?tag=detailedview-20&ie=UTF8&psc=1
If by chance something went wrong and your phone locks up on boot, this raw WW firmware install will get you back up and going (so far it has worked for everyone). This can also be used to relock the bootloader, but it will not restore OTA updates.
https://drive.google.com/file/d/155ZDnBjHeknppthFtNpGadicSNvBGokP/view?usp=sharing
Download and unzip
Reboot phone into fastboot mode
Run flashall_AFT.cmd
..
Tesla74 said:
Quick Root Guide
1. Unlock bootloader
https://dlcdnets.asus.com/pub/ASUS/..._SIGNED_UnlockTool_9.1.0.7_180912_fulldpi.apk
2. Download unofficial TWRP by shakalaca (Doesn't fully work, but can flash files from USB drive)
Download the TWRP that matches your firmware version and rename twrp.img
https://mega.nz/#F!pst3URCQ!l_N503AsNmytaErhmuiwqg
3. Put phone into fastboot mode (volume down + power button)
Connect to the computer using the side USB port
4. Download Minimal ADB and Fastboot and flash twrp.img
https://devsjournal.com/download-minimal-adb-fastboot-tool.html
fastboot flash boot twrp.img
5. Download Magisk Manager, Magisk, and Magisk Unistaller onto a USB drive
https://github.com/topjohnwu/Magisk/releases
6. Flash Magisk with TWRP and install Magisk Manager to root
I don't have the phone yet, but if anyone wants to add to this guide to make it more accurate, I'll update this post.
Click to expand...
Click to collapse
Before running the fastboot command run: "fastboot devices" without quotations. To make sure the device is recognized and connected.
Nice write up!. By the way there is an update to the system a small one maybe 70+ MB. Minor stability update.
Rashad83 said:
Before running the fastboot command run: "fastboot devices" without quotations. To make sure the device is recognized and connected.
Nice write up!. By the way there is an update to the system a small one maybe 70+ MB. Minor stability update.
Click to expand...
Click to collapse
Thanks, I updated post. I was wondering after the system update, does TWRP still work because of encryption? Or does TWRP need to be updated for every system update?
Does the unlock bootloader tool REALLY erases all everything, or it's just ASUS warning so they cover their end if user data is lost?
Tesla74 said:
Thanks, I updated post. I was wondering after the system update, does TWRP still work because of encryption? Or does TWRP need to be updated for every system update?
Click to expand...
Click to collapse
Once you flash TWRP you will not be able to update through OTA. You will have to download the update manually and then flash it, once you do that i believe it flashes the stock boot.img which removes TWRP. When that happens you will have to flash a compatible TWRP for the new update.
That's how i understand it, personally i haven't rooted yet so i can't be 100% certain.
Also it's recommended by TWRP team to return to stock before updating the system and then flashing TWRP.
---------- Post added at 08:04 AM ---------- Previous post was at 07:49 AM ----------
mbze430 said:
Does the unlock bootloader tool REALLY erases all everything, or it's just ASUS warning so they cover their end if user data is lost?
Click to expand...
Click to collapse
It's not just ASUS, Any Android device once you unlock the bootloader the user data is erased. So better backup!. By the way ASUS has a backup tool for all your apps and data i haven't tried it yet, give it a try.
That is correct. When I had my Pixel 2 XL (or any phone for that matter). When you flash TWRP on to the recovery the OTA update will always fail. You will have to either find the original recovery or the whole rom and reflash it.
---------- Post added at 04:07 PM ---------- Previous post was at 04:05 PM ----------
---------- Post added at 08:04 AM ---------- Previous post was at 07:49 AM ----------
[/COLOR]
It's not just ASUS, Any Android device once you unlock the bootloader the user data is erased. So better backup!. By the way ASUS has a backup tool for all your apps and data i haven't tried it yet. so check it out.[/QUOTE]
Dang it! I just setup the phone exactly the way I wanted it too.
Rashad83 said:
Once you flash TWRP you will not be able to update through OTA. You will have to download the update manually and then flash it, once you do that i believe it flashes the stock boot.img which removes TWRP. When that happens you will have to flash a compatible TWRP for the new update.
That's how i understand it, personally i haven't rooted yet so i can't be 100% certain.
Also it's recommended by TWRP team to return to stock before updating the system and then flashing TWRP.
Click to expand...
Click to collapse
Thanks! I hope shakalaca keeps updating TWRP with the new firmwares. Sounds like recovery.img will have to be extracted from the firmware and flashed before updating.
You will not find any file under the name of recovery.img. I tried looking for it in the stock firmware before no such file exists. The only way I think to do it is by flashing all of the boot.img where it resides I think.
Fastboot flash boot boot.img
Rashad83 said:
You will not find any file under the name of recovery.img. I tried looking for it in the stock firmware before no such file exists. The only way I think to do it is by flashing all of the boot.img where it resides I think.
Fastboot flash boot boot.img
Click to expand...
Click to collapse
I wasn't able to find either recovery.img or boot.img in the firmware.
boot.img vs recovery.img always confuses me. I wonder if updating with the update.zip method really needs stock recovery?
Tesla74 said:
I wasn't able to find either recovery.img or boot.img in the firmware.
boot.img vs recovery.img always confuses me. I wonder if updating with the update.zip method really needs stock recovery?
Click to expand...
Click to collapse
You need the payload dumber app on windows to extract the payload file which contains all the .img files which boot.img is one of them.
The boot.img contains the kernel and other important files needed to boot the device, while the recovery contains all the recovery settings responsible for reseting the device and updating, wiping actions.
From the comments i saw about recovering the phone after a bootloop it seems stock recovery isn't needed but i could be wrong. We will need input from others who have done it.
On my previous phone i could go back to stock rom without stock recovery as long it's the same rom build. So you will need to flash the same stock rom you are currently on and then flash the update.
I ran into some trouble. after running bootloader unlocker apk. it is now asking for a PIN. I tried the PIN I used when setting up the fingerprint reader and it doesn't work. It won't let me setup the phone again now.
Also got into the stock Recovery and did a user/data factory reset
Anyone suggestions?
Tesla74 said:
4. Put phone into fastboot mode (volume down + power button)
Connect to the computer using the side USB port
Click to expand...
Click to collapse
By pressing volume down + Power button, the phone goes into recovery mode not fastboot.
It's easiest doing it by adb:
Adb devices
If the phone Is found:
Adb reboot bootloader
That's what I did when I root my Rog
mbze430 said:
I ran into some trouble. after running bootloader unlocker apk. it is now asking for a PIN. I tried the PIN I used when setting up the fingerprint reader and it doesn't work. It won't let me setup the phone again now.
Also got into the stock Recovery and did a user/data factory reset
Anyone suggestions?
Click to expand...
Click to collapse
I was in the same situation, but if you check carefully you will see "use your account Google" it's just below of the pin request.
(It's written in White )
I was in the same situation, but if you check carefully you will see "use your account Google" it's just below of the pin request.
(It's written in White )
Click to expand...
Click to collapse
OMG! You are right! after staring at the screen I can finally see it! THEY NEED TO FIX THAT! I spend the past 2 hours erasing all the partitions! I wanna kill ASUS!
Marco589 said:
By pressing volume down + Power button, the phone goes into recovery mode not fastboot.
It's easiest doing it by adb:
Adb devices
If the phone Is found:
Adb reboot bootloader
That's what I did when I root my Rog
I was in the same situation, but if you check carefully you will see "use your account Google" it's just below of the pin request.
(It's written in White )
Click to expand...
Click to collapse
Thanks! I"ve updated the guide for both issues.
Tesla74 said:
Thanks! I"ve updated the guide for both issues.
Click to expand...
Click to collapse
To go to fastboot mode the hardware method will be by:
1. Holding (Power+Volume Up) until you see "Republic of Gamers" logo then release.
2. If the phone is turned off; hold the volume up only and connect the usb c to the phone(make sure the usb wire is connected to the PC already "It's basically the same as holding the power button except you'r getting the power from the usb"). You will go directly to "fastboot mode/ bootloader mode" i used to do this before on my phones, will also work on the ROG phone.
Rashad83 said:
To go to fastboot mode the hardware method will be by:
1. Holding (Power+Volume Up) until you see "Republic of Gamers" logo then release.
2. If the phone is turned off; hold the volume up only and connect the usb c to the phone(make sure the usb wire is connected to the PC already "It's basically the same as holding the power button except you'r getting the power from the usb"). You will go directly to "fastboot mode/ bootloader mode" i used to do this before on my phones, will also work on the ROG phone.
Click to expand...
Click to collapse
Thanks! I updated the guide and added link to your post.
I loaded TWRP but I can't flash Magisk on it. Can't read the /system partition.
Worse off, I am stuck at the ROG logo even after reboot.
what can I do to get the phone to at least boot back to the OS?
-----Update------
Nevermind I extracted the payload.bin and fastboot flash boot boot.img from there and it booted up again.
mbze430 said:
I loaded TWRP but I can't flash Magisk on it. Can't read the /system partition.
Worse off, I am stuck at the ROG logo even after reboot.
what can I do to get the phone to at least boot back to the OS?
-----Update------
Nevermind I extracted the payload.bin and fastboot flash boot boot.img from there and it booted up again.
Click to expand...
Click to collapse
In order to flash Magisk v17.3, you need to load Magisk and magisk unistaller on a USB drive, then boot into recovery , select USB storage then flash magisk.
Thanks to mbze430 posting the boot.img patch method of rooting, I've updated the guide. This works without the need for TWRP.
Need info on flashing twrp. Are all attempts done on firmware version 23 (where latest shakalaca version of TWRP is supported)? Is there no way to get TWRP working on firmware version 43?
Found this while trolling through the Chinese forums, none of this is my work, I have translated the instructions as best I can.
Disclaimers; I have not tried this, it may brick the global rom, the custom recovery is likely only in Chinese language.
You need:
Boot Loader unlock code (currently probably not possible to get)
Huawei USB drivers
Recovery image (attached)
Magisk package (attached)
files: https://mega.nz/#!PM0EmYLA!384hZjmJ9ExNc7Q8rSqssHunWSO7AxQ3GA4qet6RX4E
Extract files to a folder, open command prompt and change into this folder.
Unlock bootloader (BL unlock will clear the phone data, please do a backup)
- Obtain an official unlock code
- double-click to open the "Huawei Toolbox.exe"
- click "unlock bootloader "
- enter the unlock code in the pop up window , click OK, and wait for the phone to unlock complete restart.
Flash the third-party recovery
- Turn off the phone and connect the computer. Press and hold the “Volume Down” button and “Power button” until the phone displays the android page and release your finger.
- open command prompt and run:
fastboot flash recovery_ramdisk twrp.img
- after seeing the two OKAY feedback from the command line, the flash is successful.
Enter recovery to flash root image (this step will clear all data of the mobile phone including memory card, please make a backup in advance)
- long press “Volume Up” and “Power” ", until you see the a twrp logo, release the keys and wait to enter recovery mode
- After entering recovery, click the second item “Clear”, click “Format Data Partition” in the lower left corner, slide the slider to enter the clear, wait for the progress bar to complete
- Return to the recovery homepage, click on the last item "Advanced", select the last item "Remove data forced encryption", slide the slider to release, wait for completion
Copy the root package to the phone
- In Command Prompt type or copy the following commands
adb push magisk-installer.zip /sdcard
adb push magisk.apk /sdcard
Install Image
- Whilst still in recovery mode, click the first item to install the magisk-installer.zip package from the sdcard , slide the slider to install, wait for the flash to complete, and restart the phone
- After reboot is complete, click “File Manager”, select the apk file “magisk.apk” just copied from the memory card when install is finished, open the magisk app and click “No, thank you” in the pop-up window
- Return to the command line tool, type the code to execute, and wait for the phone to automatically restart
Fastboot reboot recovery
- after the restart, open "magisk", it should show that the installation is complete, that is, ROOT is achieved.
Anything in that forum on how to manually update phone?
technotika said:
Anything in that forum on how to manually update phone?
Click to expand...
Click to collapse
That is actually what I was looking for
But none, problem is the v20 (china version) seems to get OTA way before us, they all got v143 2 weeks ago.
I did find the menu to do it, but it only supports if the image is stored on an sdcard, and when I click it it says no sdcard found. so its impossible.
Tried same with similar results. One day eh? ?
İ have V20 chinese version. İ want to root but could not find a way. Can you share the chinese forum maybe i can find how to unlock bootloader
greenblueye said:
İ have V20 chinese version. İ want to root but could not find a way. Can you share the chinese forum maybe i can find how to unlock bootloader
Click to expand...
Click to collapse
If you read what I wrote in the first post you would see you cannot root without a bootloader unlock code.
Tested! Work bootloader code on Russia services (Cost 20USD)
belam00r said:
Tested! Work bootloader code on Russia services (Cost 20USD)
Click to expand...
Click to collapse
Nice! Did unlocking bootloader factory reset your device?
Yes of course. All new Huawei and Honor do a reset after unlocking
i get bootloader unlock code from funkiehuwai for 20$
any one tried this instructions and have success?
I just wonder comments below will work?
*adb push magisk-installer.zip /sdcard
*adb push magisk.apk /sdcard
because there is no sd card support for view20?
when i opened huawei-toolbox.exe its in chinese and im afraid to continue other instructions
Did anyone use TWRP and which version?
Did the View 20 Boot correctly?
I read in a Forum, that with the view 20 doesn´t boot correctyl with TWRP. The reason should bei the Storage...
Best regards
Unlocked Bootloader
belam00r said:
Tested! Work bootloader code on Russia services (Cost 20USD)
Click to expand...
Click to collapse
Does that mean you rooted you device (with the files from above) or you just unlocked the bootloader?
I was able to unlock my bootloader with a code from funkyhuawei (about 18 €, site seems to be down currently). I did not use the unlock tool above, mainly because its chinese
- Enabled "USB debugging" and "OEM unlock" in developer settings
- Connected phone to PC, opened adb and used "adb reboot bootloader"
- Unlocked via "fastboot oem unlock *16digit code*"
This worked out fine. However, as far as i understand it magisk is installed over twrp (recovery_ramdisk), removing twrp but granting you root. This makes me kind of nervous since twrp has been a nice safety net on several occasions. This is why I stopped after unlocking the bootloader. Maybe someone has more experience on this? Why is there so little interest in rooting this phone?
Regards
root achieved
I don't know if nobody's interested or nobody wants to try rooting this phone. However, I just went ahead and tried it. I used this guide: https://topjohnwu.github.io/Magisk/install.html#emui-9 (posted in https://forum.xda-developers.com/honor-view-20/help/root-t3900266). https://androidhost.ru/search.html is were I got the firmware from (posted in https://forum.xda-developers.com/honor-view-20/how-to/honor-view-20-ota-march-patch-t3909075/page12). I downloaded the 9.0.1.137 firmware, since this corresponds to the one currently installed on my phone.
In summary:
I extracted recovery_ramdis.img from the update.app with the huawei extractor. In order to see this image file, I had to uncheck "verify header checksum" under settings->extract.
I then transferred this file to my phone (download folder), downloaded newest magisk manager and installed it. I then pushed INSTALL next to magisk (which was not installed of course), Install again and then Patch boot image file. Choose your transferred recovery_ramdis.img and go ahead. Transfer patched file (now called patched_boot.img) back to PC.
For the next step, bootloader has to be unlocked already! Turn on "Enable OEM unlock" and "USB debugging" in the developer options and reboot to fastboot. Open ADB as usual and connect cable to phone. Type "fastboot flash recovery_ramdisk *path to patched_boot.img*" and wait for success.
A few things to keep in mind:
-Had a bootloop with the newest version of the viper4android module!
-The root was done without custom recovery, therefore a magisk module leading to a bootloop requires you to factory reset and do everything again if you want root to work (at least i couldn't get it to work again by reflashing orginial recovery_ramdis.img followed by patched_boot.img).
-For rooting to work you have to boot phone to recovery (in this case resulting in a "normal boot"). This means pressing volume up and holding it when booting the phone. For restart you could use an app which lets you boot to recovery automatically.
-While the above my sound annoying, permanently gives you the chance to boot you phone unrooted. This is nice, especially when you have a bootloop due to a magisk module (which I had).
-According to the first link, you could install a custom recovery into the second recovery partition of Huawei/Honor devices (erecovery_ramdis). there is no official twrp available for Honor View 20 at the moment.
-After unlocking my bootloader (see post above) I had "device not verified" in google play store. After rooting, my device is verified again
Regards
garris_bibop said:
I don't know if nobody's interested or nobody wants to try rooting this phone. However, I just went ahead and tried it. I used this guide: https://topjohnwu.github.io/Magisk/install.html#emui-9 (posted in https://forum.xda-developers.com/honor-view-20/help/root-t3900266). https://androidhost.ru/search.html is were I got the firmware from (posted in https://forum.xda-developers.com/honor-view-20/how-to/honor-view-20-ota-march-patch-t3909075/page12). I downloaded the 9.0.1.137 firmware, since this corresponds to the one currently installed on my phone.
In summary:
I extracted recovery_ramdis.img from the update.app with the huawei extractor. In order to see this image file, I had to uncheck "verify header checksum" under settings->extract.
I then transferred this file to my phone (download folder), downloaded newest magisk manager and installed it. I then pushed INSTALL next to magisk (which was not installed of course), Install again and then Patch boot image file. Choose your transferred recovery_ramdis.img and go ahead. Transfer patched file (now called patched_boot.img) back to PC.
For the next step, bootloader has to be unlocked already! Turn on "Enable OEM unlock" and "USB debugging" in the developer options and reboot to fastboot. Open ADB as usual and connect cable to phone. Type "fastboot flash recovery_ramdisk *path to patched_boot.img*" and wait for success.
A few things to keep in mind:
-Had a bootloop with the newest version of the viper4android module!
-The root was done without custom recovery, therefore a magisk module leading to a bootloop requires you to factory reset and do everything again if you want root to work (at least i couldn't get it to work again by reflashing orginial recovery_ramdis.img followed by patched_boot.img).
-For rooting to work you have to boot phone to recovery (in this case resulting in a "normal boot"). This means pressing volume up and holding it when booting the phone. For restart you could use an app which lets you boot to recovery automatically.
-While the above my sound annoying, permanently gives you the chance to boot you phone unrooted. This is nice, especially when you have a bootloop due to a magisk module (which I had).
-According to the first link, you could install a custom recovery into the second recovery partition of Huawei/Honor devices (erecovery_ramdis). there is no official twrp available for Honor View 20 at the moment.
-After unlocking my bootloader (see post above) I had "device not verified" in google play store. After rooting, my device is verified again
Regards
Click to expand...
Click to collapse
Well done good job:good:
İ have chinese version PCT-AL10 9.0.1.144 right now. Do you think i can use the same way? İ wonder from which version to extract recovery_ramdis.img
I have my view20 rooted
Thanks for the instructions.
greenblueye said:
I have my view20 rooted
Thanks for the instructions.
Click to expand...
Click to collapse
You're welcome Be careful with sound improvement modules in Magisk! Had another bootloop with the Zirene module...
Which firmware did you get the recovery_ramdisk from in the end?
garris_bibop said:
You're welcome Be careful with sound improvement modules in Magisk! Had another bootloop with the Zirene module...
Which firmware did you get the recovery_ramdisk from in the end?
Click to expand...
Click to collapse
I get recovery-ramdisk from firmware PCT-AL10 9.0.1.129 . my phone is on version 9.0.1.144 but it worked:good:
After root i can not auto update software. 9.0.1.166 version is seen on ota but after download it says update is unsuccessful. Do you have any suggestion?
I think thats to be expected when rooted. Go for manual update I guess (https://forum.xda-developers.com/honor-view-20/how-to/honor-view-20-ota-march-patch-t3909075/page12). Personally I wouldn't bother with every update unless theres interesting new features and/or security updates. just to be on the safe side I would reflash the original recovery_ramdisk before updating! And backup your data!
NM Card
Hello !
Unless I'm mistaken, the View20 must be able to use nano sd cards (NM Card)
There's a ton of information out there, but finding it can sometimes be a challenge, especially for a newbie. And then there's posts to read through, in case a process has changed and it's only talked about in a single place, buried any number of pages back. So this is my attempt to put all Pixel 3 how-to's into a single thread. Everything below is what worked for me, from start to finish, with a fresh phone directly from Google that was bootloader-locked, unrooted, and running stock Android. Comments are welcome and encouraged: if something doesn't work for you, or you have a better/quicker/more reliable way of doing something, or maybe I made a mistake...let me know!
A few things:
Everything in this guide was tested on a "regular" Pixel 3 (blueline). It should all work exactly the same on a Pixel 3 XL (crosshatch), as long as you download the appropriate files (specifically the factory/OTA images and TWRP). I'm posting this in both blueline and crosshatch forums.
This first post will have links to files and the tools you need, as well as general things (like how to enable debugging and boot into recovery). The second post has how-to's for the big stuff (flashing images, TWRP, unlocking, etc).
I'm not responsible for anything you do. Follow these guides at your own risk. Doing so may also void your warranty.
Files and URLs
Official Android files
Factory (wipes device and requires unlocked bootloader): https://developers.google.com/android/images
Full OTA (leaves data intact, can be done via ADB sideload): https://developers.google.com/android/ota
Preview/beta OTA: https://developer.android.com/preview/download-ota.html
TWRP
XDA thread: https://forum.xda-developers.com/pixel-3-xl/development/twrp-3-2-3-0-pixel-3-xl-t3861623
Download: https://dl.twrp.me/crosshatch/
Magisk
XDA thread: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
ADB and Fastboot
Google USB drivers: https://developer.android.com/studio/run/win-usb
SDK platform tools: https://developer.android.com/studio/releases/platform-tools
Download the ZIP and open (no need to extract the whole thing)
Copy the files below to their own directory (you will use this directory for all ADB/Fastboot commands):
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
General
Enable USB debugging
Download Google USB drivers (see above)
Download SDK platform tools and copy required files to their own directory (see above)
Enable USB debugging (Settings > About > tap Build 7 times > back > Developer options)
Plug phone into computer and when "Allow USB debugging" box comes up, check the box and allow (may need to have adb daemon running on the computer already, see below)
Fastboot mode (using hardware keys) aka bootloader
Power off
Hold VOL- and press/hold PWR until bootloader (fastboot) comes up
Recovery mode (using hardware keys)
Get into Fastboot mode (see above)
Use VOL buttons to find Recovery in the list, use PWR to select (should boot to broken android image)
Hold PWR and press VOL+ once to get into recovery
Useful ADB and Fastboot commands
Enable USB debugging (see above)
ADB (used while phone is "on" and booted up):
Use "adb devices" to ensure the computer is authorized
Use "adb reboot bootloader" to get into Fastboot
Fastboot mode
Use "fastboot devices" to verify computer can see your phone
Update #1: Items below marked through were removed since they don't really apply to Android 10.
Update #2: Edited to reflect changes in root with Android 11.
A quick note: everything below is assuming you're using Windows 10. When it says "Type...", this assumes you've opened a command window in the location of adb/fastboot and that all files referenced are in the same directory and (in some cases) renamed as I reference them (short names without spaces simplifies things). If you're using Powershell, you will probably need to change "adb" and "fastboot" to read ".\adb" and ".\fastboot" so Powershell will use the local files.
Unlocking the bootloader
THIS WILL WIPE YOUR PHONE, SO MAKE SURE EVERYTHING IS BACKED UP!
In Developer Options, enable OEM unlocking and confirm (it may ask you to input fingerprint or PIN/pattern/password)
Boot into Fastboot mode (see above)
Type to unlock:
Code:
fastboot flashing unlock
Use VOL+ key to get the options on the screen to read "Unlock the bootloader" and use PWR button to select
Type to reboot:
Code:
fastboot reboot
Locking the bootloader
THIS WILL WIPE YOUR PHONE, SO MAKE SURE EVERYTHING IS BACKED UP!
Boot into Fastboot mode (see above)
IMPORTANT: restore stock recovery if you replaced it with TWRP (this should prevent the "Can't find valid operating system" issue)
Type to lock:
Code:
fastboot flashing lock
Use VOL buttons to find "Lock the bootloader" and use PWR to select
Type to reboot:
Code:
fastboot reboot
Factory reset via fastboot (can also do this without wiping data)
THIS COULD WIPE YOUR PHONE, SO MAKE SURE EVERYTHING IS BACKED UP!
Download factory image ZIP and unzip all files into their own folder
Unlock bootloader (see above)
Reboot into Fastboot mode
You have 2 options:
Register the location of fastboot.exe with the PATH system variable and run "flash-all.bat"
Wipe data: just run "flash-all.bat" and call it a day
Do not wipe data: open "flash-all.bat" in a text editor (careful not to double-click and run it!), remove the "-w" from the last line to disable the wiping of data, then save, close, and run
Move the 3 files (bootloader IMG, radio IMG, image ZIP) into the ADB folder, rename for simplicity if you want, launch cmd or Powershell, and run the commands below (which come from "flash-all.bat")
Wipe data: type out commands below, but at last line, add "-w" flag: fastboot -w update image.zip
Do not wipe data: type out commands below as written (no "-w" flag)
The commands:
Code:
fastboot flash bootloader bootloader-blueline-XXXX.img
fastboot reboot bootloader
[wait for reboot]
fastboot flash radio radio-blueline-XXXX.img
fastboot reboot bootloader
[wait for reboot]
fastboot update image-blueline-XXXX.zip
Note: The last command (update image) will launch the red "fastbootd" screen, so don't worry and be patient while the command line tells you what's happening. The phone will reboot on its own into the Android system (not fastboot) afterward.
Root Android 10+ using Magisk (Canary channel)
This must be done after every update, and you cannot use the patched file from a different phone!
Unlock bootloader (see above)
Download factory image (not OTA, see link above)
Download and install Magisk Manager Canary (see link above)
In Magisk Manager settings, set Update Channel to "Canary"
Extract boot.img from image-blueline-XXXX.zip found in the factory image you downloaded
Place boot.img on your phone's internal storage
Open Magisk Manager and do:
tap "Install" button (next to "Magisk" in first block on the main screen)
"Select and Patch a File" option
Find boot.img file you just placed on your phone
tap "Let's Go"
When finished, move the newly-created magisk_patched.img file over to your computer's ADB directory
Reboot into bootloader
Type:
Code:
fastboot flash boot magisk_patched.img
fastboot reboot
Open up Magisk Manager and make sure everything's good!
Note : if you get stuck in fastboot mode or in a boot loop, flash the stock boot.img to both slots and try again
Code:
fastboot flash boot boot.img --slot all
Optional:
for adblocking, tap "Systemless hosts" in Magisk Manager, then install AdAway using F-Droid
install a performance kernel like Kirisakura for Bluecross (R)
Updating Android 10+ while rooted
You can't take an OTA while rooted, so updating Android 10+ (as in monthly updates) can be one of two ways.
Method #1 (faster, but more chance for issues)
Download OTA ZIP and move it to ADB folder (don't unzip it)
This does not require an unlocked bootloader, but does require USB debugging (see above)
Get boot.img from the factory image (see first post on where to download this) and place your ADB directory
Reboot into bootloader / fastboot and type to restore stock boot to both slots:
Code:
fastboot flash boot --slot all boot.img
fastboot reboot bootloader
[wait for reboot]
Use VOL buttons to select "Apply update from ADB"
Type (where filename is the name of the file you want to sideload):
Code:
adb sideload filename.zip
Wait for it to finish, will take you back to Recovery when it's done
Reboot using menu
Method #2 (takes longer, but best bet for minimal issues)
Follow "Factory reset via fastboot" instructions (see above, make sure you don't wipe your data!)
Take the OTA in the official way (through Android)
Follow "Root Android 10+ using Magisk Canary" instructions (see above)
Boot into TWRP (3.3.0-0 or higher)
Download TWRP IMG and place in ADB folder (rename the file to twrp.img)
If not already done, unlock the bootloader (see above)
Reboot into bootloader
Type to boot TWRP (it will restart and should boot into TWRP):
Code:
fastboot boot twrp.img
OPTIONAL: Replace recovery by installing TWRP
Your phone should automatically mount, so move twrp.img from PC to Download folder on phone's internal storage
Advanced > Install Recovery Ramdisk > choose TWRP IMG > Swipe to install
Back > Fix Recovery Bootloop > Reboot System > Do Not Install when asked if TWRP should install app
Root using Magisk (18.1 or higher)
Download Magisk ZIP and move to device
Boot into TWRP (see above)
Enter your PIN/pattern/password to decrypt (unnecessary if you are not using security on your phone)
Swipe to Allow Modifications (to system)
Install > find and select the Magisk ZIP > Slide to install
Wipe cache > Reboot system > Do Not Install when asked if TWRP should install app
Open Magisk Manager to verify latest and to install modules
"Can't find valid operating system" booting issue
Unlock your bootloader again (see above)
Follow steps for "Factory reset via fastboot" (see above) and keep the wipe flag
After it reboots, power off (press PWR and select "Power off" from menu)
Follow steps for "Locking the bootloader" (see above)
After it reboots into Fastboot mode, have it start using the PWR button
Android Recovery / "Cannot load Android system" booting issue
This can happen for a number of reasons, but the fix is the same: "Factory reset via fastboot" (see above). You probably do not need to wipe user data, so you can omit the "-w" flag.
If you still get the error message, select the "Try again" option. If it still doesn't work, try "Factory reset via fastboot" again, as well as "Try again". If it doesn't work this time, you probably have no choice but to do a factory reset (in which you will definitely lose your data).
If it happens after flashing Magisk in TWRP, though, you've got a slightly different issue and the problem will persist no matter how many times you flash the factory images and re-install Magisk. This is probably due to something leftover in the previous Magisk installation that conflicts with the new installation. There are two ways to handle this.
First and easiest: uninstall Magisk Manager app before rebooting into the bootloader and running fastboot commands. Then proceed as usual (sideload OTA or flash factory images via fastboot, boot TWRP, and flash Magisk). All guides for this are above. This method preserves any modules you have installed.
Second and more complete (if the above method still gives you trouble):
download to your phone the Magisk ZIP, Magisk Uninstaller ZIP, and Magisk APK from this XDA thread
uninstall the Magisk Manager app
reboot to bootloader
using fastboot, boot into TWRP using IMG (you don't need to replace boot with TWRP)
flash Magisk Uninstaller ZIP
wipe Dalvik
flash Magisk ZIP
wipe Dalvik
reboot system (do not install TWRP)
install Magisk Manager APK and re-install any modules
I just have a couple questions pls-
1) Do the above instructions work on the Verizon Pixel 3 XL
2) I'm currently runned the official Android Q Beta (April 5). Do I need to leave the beta, then restore back to stock Android P (and do I do all those updates before starting root instructions)?
Should I be concerned if my phone hasn't informed me of an April update?
I don't remember if I unlocked the bootloader before or after the updates to the March security update. Does it matter?
farfegnugen said:
I just have a couple questions pls-
1) Do the above instructions work on the Verizon Pixel 3 XL
2) I'm currently runned the official Android Q Beta (April 5). Do I need to leave the beta, then restore back to stock Android P (and do I do all those updates before starting root instructions)?
Click to expand...
Click to collapse
Is your bootoader Locked or Unlocked?
---------- Post added at 08:08 AM ---------- Previous post was at 08:07 AM ----------
mcwups1 said:
Should I be concerned if my phone hasn't informed me of an April update?
I don't remember if I unlocked the bootloader before or after the updates to the March security update. Does it matter?
Click to expand...
Click to collapse
No it does NOT matter which build you unlocked your BL
*edit*
Try to go into settings and force the update or you can always flash the entire factory img for april
farfegnugen said:
I just have a couple questions pls-
1) Do the above instructions work on the Verizon Pixel 3 XL
2) I'm currently runned the official Android Q Beta (April 5). Do I need to leave the beta, then restore back to stock Android P (and do I do all those updates before starting root instructions)?
Click to expand...
Click to collapse
1.) If you somehow have an unlocked bootloader, yes, it would work for the Verizon Pixel 3 XL. However, I was under the impression that Google will not unlock the BL for the Verizon variant and there is currently no way to "hack" it.
2.) It should work the same whether you're on P or Q, though if you want to remain with Q, make sure you download the beta files directly from Google (rather than the P images) and use Magisk 19.0 instead of 18.1.
mcwups1 said:
Should I be concerned if my phone hasn't informed me of an April update?
I don't remember if I unlocked the bootloader before or after the updates to the March security update. Does it matter?
Click to expand...
Click to collapse
You can force it to check for updates; when you unlocked the BL shouldn't matter if you're using a patched boot image.
HACK3DANDR0ID said:
Is your bootoader Locked or Unlocked?
---------- Post added at 08:08 AM ---------- Previous post was at 08:07 AM ----------
No it does NOT matter which build you unlocked your BL
*edit*
Try to go into settings and force the update or you can always flash the entire factory img for april
Click to expand...
Click to collapse
I haven't done anything to the phone since I got it 3 weeks ago but hoping to. Can the VZ version be unlocked? If so please point me in the right direction.
farfegnugen said:
I haven't done anything to the phone since I got it 3 weeks ago but hoping to. Can the VZ version be unlocked? If so please point me in the right direction.
Click to expand...
Click to collapse
No, but they working on finding a way to unlock it: [Bounty] Unlock Bootloader VZW Pixel 3 XL by coolhandz
Homeboy76 said:
No, but they working on finding a way to unlock it: [Bounty] Unlock Bootloader VZW Pixel 3 XL by coolhandz
Click to expand...
Click to collapse
Thanks so much for the info! Its difficult trying to find the current status of all the diff devices' root statuses.
Thanks for this guide, when using the flash-all.bat and wiping the device will this method flash to both slots?
CadTechBGMC said:
Thanks for this guide, when using the flash-all.bat and wiping the device will this method flash to both slots?
Click to expand...
Click to collapse
yes, if you are flashing with wipe all option (without removing -w) it does flash to both slots.
Regarding getting to fastboot:
Since I have flashed April security update and after lightly bricking my Pixel 3Xl, (I have not lost data but I was unable to boot till solving the brick), the phone doesn't stay in fastboot when I use the adb command to get into it and all I can do to get to stay in fastboot is the power and volume down combo for more than 40 seconds.
I have my pixel working perfectly with root and kirisakura kernel but it is a bit of a pain getting to boot TWRP from fastboot for flashing stuff.
EMJI79 said:
Regarding getting to fastboot:
Since I have flashed April security update and after lightly bricking my Pixel 3Xl, (I have not lost data but I was unable to boot till solving the brick), the phone doesn't stay in fastboot when I use the adb command to get into it and all I can do to get to stay in fastboot is the power and volume down combo for more than 40 seconds.
I have my pixel working perfectly with root and kirisakura kernel but it is a bit of a pain getting to boot TWRP from fastboot for flashing stuff.
Click to expand...
Click to collapse
yeah if i try to get into fastboot directly from a power on state it doesn't stick on fastboot blinks for a second and then starts with reboot process, probably we are pressing it too long.
what i do normally is to power off the device first wait for few seconds then then use key combination to get it to fastboot from power-off state. Booting from fastboot to twrp never had any issues unless i had messed up the twrp installation due to some mess i did.
SacredDeviL666 said:
yeah if i try to get into fastboot directly from a power on state it doesn't stick on fastboot blinks for a second and then starts with reboot process, probably we are pressing it too long.
Click to expand...
Click to collapse
I have to press the keys 40 seconds even from power off.
EMJI79 said:
I have to press the keys 40 seconds even from power off.
Click to expand...
Click to collapse
definitely not 40seconds from power off state for me. not sure whats happening there
Maybe a short video would be a help to some of us newbies
Dumb question. Probably gonna upgrade from an original Pixel XL soon. As long as I buy it from store.google.com, I should be able to unlock the bootloader without worrying about a crack/hack, correct? Thanks!
Drashnar said:
Dumb question. Probably gonna upgrade from an original Pixel XL soon. As long as I buy it from store.google.com, I should be able to unlock the bootloader without worrying about a crack/hack, correct? Thanks!
Click to expand...
Click to collapse
That is correct. I made the same switch from an OG Pixel and Pixel XL to P3 and P3XL right after release. Unlock the bootloader before you mess around a lot since it will do a factory reset.
How about backups? Does anyone backup and restore, or not?
If so, how do you do it with this 2 partition system?
installed and I like it. I cant get the clock off the lock screen. all settings says it is off.
wished it had MicroG installed instead of gapps