Related
Hello,
I am trying to create backup of my Lenovo P70 using MtkDroidTools. I cannot create scatter file because when I click Block Map, "Create Scatter File" is grayed out. Please help me as I'm in urgent need of it.
Best Regards
sherazi21st said:
I am trying to create backup of my Lenovo P70 using MtkDroidTools. I cannot create scatter file because when I click Block Map, "Create Scatter File" is grayed out.
Click to expand...
Click to collapse
Do you see all the partitions listed (like recovery, boot, system) after clicking 'Block Map'?
If no, then it means phone is not connected properly.
Sometimes, you have to install drivers like Android CDC Gadget driver, Android VCOM drivers for it to work
GokulNC said:
Do you see all the partitions listed (like recovery, boot, system) after clicking 'Block Map'?
If no, then it means phone is not connected properly.
Sometimes, you have to install drivers like Android CDC Gadget driver, Android VCOM drivers for it to work
Click to expand...
Click to collapse
I See all partitions but their mount point is not there plus create scatter file is grayed out.
sherazi21st said:
I See all partitions but their mount point is not there plus create scatter file is grayed out.
Click to expand...
Click to collapse
Hi,
Same problem with another MT6753 device. Please, can you help for create the scatter file?
sherazi21st said:
I See all partitions but their mount point is not there plus create scatter file is grayed out.
Click to expand...
Click to collapse
manos78 said:
Same problem with another MT6753 device. Please, can you help for create the scatter file?
Click to expand...
Click to collapse
These MTK chips have 64-bit processors..
As of now, the MTK Droid Tools software isn't updated to support these new 64 bit chipsets.
You can try to manually create a scatter file, or check the phone manufacturer's website for complete firmware with a specific tool or XDA Firmware. (That might include a scatter file; IDK)
If you don't find any, better wait till a proper tutorial / update comes.
I think there'll be some solution to this in the Chinese forums..
The Chinese Smart phone companies are highly dependent on the cheap Mediatek chipsets..
So, you can try looking there if you have patience and use Google Translate with Chrome.
manos78 said:
Hi,
Same problem with another MT6753 device. Please, can you help for create the scatter file?
Click to expand...
Click to collapse
Which phone are you using? I've scatter of my phone and I'm able to flash using sp flash tools. If you're using a Lenovo phone then you'll find scatter and flash tool which will do your job.
sherazi21st said:
Which phone are you using? I've scatter of my phone and I'm able to flash using sp flash tools. If you're using a Lenovo phone then you'll find scatter and flash tool which will do your job.
Click to expand...
Click to collapse
Wiko Fever, see: http://forum.xda-developers.com/android/development/root-wiko-fever-t3242640/
GokulNC said:
These MTK chips have 64-bit processors..
As of now, the MTK Droid Tools software isn't updated to support these new 64 bit chipsets.
You can try to manually create a scatter file, or check the phone manufacturer's website for complete firmware with a specific tool
If you don't find any, better wait till a proper tutorial / update comes.
Click to expand...
Click to collapse
I'm doing the initial research/development. No firmware from manufacturer at time. I'm doing all with one unit of the device. I'm creating the scatter file manually using a ROM dump. My problem at time is that my dump isn't a full 16GB dump, only 1.5GB. :crying:
manos78 said:
Wiko Fever, see: http://forum.xda-developers.com/android/development/root-wiko-fever-t3242640/
Click to expand...
Click to collapse
Sorry, don't know about this phone. I've Lenovo and there's a Russian forum which covers almost all Lenovo phones.
Hi,
In the e3 recovery menu is an option for show the bootlog, inside it you can show the PARTION mapping of the device... with all info: partition name, start address, size... you can create the scatter file by hand with this info.
Hey GUys,,,,
LG V10 ILAPO is here
LG V10 Infinite Loop Auto Power Off FIX!!!
Flash it with lg up and uppercut link is below........
<MOD EDIT - LINK REMOVED>
Anything for h962? I have bootlopp and I want to try this method (without hope obviously.....but never say never)
Has somebody tried it?
Hi guys, not work for me & with error.
Is it applied for Lollipop, MM, and Nougat
Dear Fahad!
Are the tot files for LP, MM or N version?
Guys!
This is a lie. The google drive link posted in the description of the youtube video referred in the OP contains folder names and filenames of V10 model but the TOT files contained therein are of LG G4 models. You can check yourself by searching xVLG in the TOT files using any hex editor.
And that is also why the LGUP says that its an invalid TOT file.
Kidding with us
rizkhan999 said:
Guys!
This is a lie. The google drive link posted in the description of the youtube video referred in the OP contains folder names and filenames of V10 model but the TOT files contained therein are of LG G4 models. You can check yourself by searching xVLG in the TOT files using any hex editor.
And that is also why the LGUP says that its an invalid TOT file.
Click to expand...
Click to collapse
i downloaded the file for my model (f600l) it's size 1.66MB , it contains 4 files: PrimaryGPT_0.bin , aboot.bin , abootbak.bin , BackupGPT.bin .
tried to extract them but it took 220 GB then my hdd part empty it need more space what is that even windows os don't need all this space lol
will give it a try now , as my phone bootlooping
Just asking
Does someone has their V10 already fixed via iLapo fix? If so, then let me know. Thanks!
I have obtained a copy of tool multi tool for flashing/unbricking Oppo devises
I still don't know how to use it as it displays "invalid scatterfile format" when loading the ofp file.
fil3s said:
I have obtained a copy of tool multi tool for flashing/unbricking Oppo devises
I still don't know how to use it as it displays "invalid scatterfile format" when loading the ofp file.
Click to expand...
Click to collapse
can share the link again please . The file is not available by the link provided.
tailedbeast said:
can share the link again please . The file is not available by the link provided.
Click to expand...
Click to collapse
I don't recommend using tools available to flash oppo phones but u can grab it here.
I haven't tested it and I doubt it will work. I don't own an oppo anymore.
fil3s said:
I don't recommend using tools available to flash oppo phones but u can grab it here.
I haven't tested it and I doubt it will work. I don't own an oppo anymore.
Click to expand...
Click to collapse
the file is password protected . what is the password ?
Idk. I forget. I made this post 2 yrs ago. :silly:
Mod, please delete this post.
MOD ACTION:
Thread closed at the request of OP.
Brothers, I am getting the below error when I tried to flash MIUI 11.0.6 on my Redmi note 7 pro. Currently am on havoc os and I want to go back to stock Rom.
"could not found file flash_all.bat"
Please help me to fix this issue..
ziyadh.aj said:
Brothers, I am getting the below error when I tried to flash MIUI 11.0.6 on my Redmi note 7 pro. Currently am on havoc os and I want to go back to stock Rom.
"could not found file flash_all.bat"
Please help me to fix this issue..
Click to expand...
Click to collapse
did you selected the target path correctly. it seems the problem is that you haven't selected the right path to the ROM or the ROM file hasn't been extracted properly(maybe missing files).
first check if you have selected the right path
if it is correct then check if ROM has been extracted properly.
meanwhile from which version are you trying to flash?
Try all flash files from desktop path and mainly create a folder like this without a space eg: (Redminote7pro)
kiruba Developer said:
Try all flash files from desktop path and mainly create a folder like this without a space eg: (Redminote7pro)
Click to expand...
Click to collapse
yes , mi flash tool only support source file on desktop
mathan7 said:
yes , mi flash tool only support source file on desktop
Click to expand...
Click to collapse
Sorry I want to correct you here, you can flash from anywhere in drive but the address should not have spaces.
EDIT: I don't need this anymore since I've fixed the problem
Could anyone please help me to upload the QFIL partition dump and the rawprogram files of a V500N LGU variant V50? I tried the dump files for the Sprint variant, and it enabled me to go into the download mode. However, I can't flash any stock ROM, neither the Korean ones nor the American ones. LG Bridge can't detect anything as well.
I think there is a patched LGUP here in this LG G8 thread but I'm not sure if it works on V50, you can use it to flash KDZ which you can download from LG website according to your variant
Bronnel said:
I think there is a patched LGUP here in this LG G8 thread but I'm not sure if it works on V50, you can use it to flash KDZ which you can download from LG website according to your variant
Click to expand...
Click to collapse
I think I have already been using that version of LGUP. I didn't have any problem with flashing the stock ROM before. Now I am facing this problem where I can't flash any stock ROM because LGUP always encounters a cross-flashing problem. Most likely, this is because of the incompatible partition dump files I've used.
wibigdog said:
EDIT: I don't need this anymore since I've fixed the problem
Could anyone please help me to upload the QFIL partition dump and the rawprogram files of a V500N LGU variant V50? I tried the dump files for the Sprint variant, and it enabled me to go into the download mode. However, I can't flash any stock ROM, neither the Korean ones nor the American ones. LG Bridge can't detect anything as well.
Click to expand...
Click to collapse
Hello i am currently facing the same problem, no download mode only edl mode, how are u able to revive your phone? Im using lg v50 korean variant
wibigdog said:
I think I have already been using that version of LGUP. I didn't have any problem with flashing the stock ROM before. Now I am facing this problem where I can't flash any stock ROM because LGUP always encounters a cross-flashing problem. Most likely, this is because of the incompatible partition dump files I've used.
Click to expand...
Click to collapse
Hi, I have a same problem, how can you fix this case?
optimus207 said:
Hi, I have a same problem, how can you fix this case?
Click to expand...
Click to collapse
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
wibigdog said:
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
Click to expand...
Click to collapse
can i need the raw.xml file for the v500n variant
Hi man, how you fix the problem?
wibigdog said:
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
Click to expand...
Click to collapse
I followed and got the file. OP_LGU_KR.img what to do next please help
Aumkup said:
I followed and got the file. OP_LGU_KR.img what to do next please help
Click to expand...
Click to collapse
Hi man, how you find the OP_LGU_KR.img? I can't read the tutorial because the sites down for me.
Aumkup said:
I followed and got the file. OP_LGU_KR.img what to do next please help
Click to expand...
Click to collapse
OMG now i can read the website, i'll do today!!
Aumkup said:
I followed and got the file. OP_LGU_KR.img what to do next please help
Click to expand...
Click to collapse
Friend i win this battle, follow this:
1. download the Korean KDZ
2. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
3. Download the v50unbrickbackup https://drive.google.com/file/d/13AJ8SnKmpOrTQF2EQ1odJK7-4qfUTIdF/view
4. join the folders with the images and the .bin
5. download .raw files that i make https://mega.nz/folder/dAYzySqA#IMxrMAZeBCaAuUZ_eFB6Uw
(notice that there is a mix of img and bin files.
This is due to missing some files from step 2)
6. put your cell in EDL and open qfil, select all rawprogrames with ctrl+a, and download!
7. After process, your phone go to download mode.
8. In LGUP, select refurbished, and join
(in this step i tried a few times without success. The process failed midway.
But after 2 attempts, success!)
FOR ME WORKS, I'm VERY GLAD! I PRAY A LOT, AND JESUS SAVE THE DAY. LOVE JESUS REALLY, GOD SAVE MY MONEY AFTER I PRAY.
Friend i try but.. Nothing just lose phone. i'm sick because this!
Aumkup said:
I followed and got the file. OP_LGU_KR.img what to do next please help
Click to expand...
Click to collapse
Friend i win this battle, follow this:
1. download the Korean KDZ
2. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
3. Download the v50unbrickbackup https://drive.google.com/file/d/13AJ8SnKmpOrTQF2EQ1odJK7-4qfUTIdF/view
4. join the folders with the images and the .bin
5. download .raw files that i make https://mega.nz/folder/dAYzySqA#IMxrMAZeBCaAuUZ_eFB6Uw
(notice that there is a mix of img and bin files.
This is due to missing some files from step 2)
6. put your cell in EDL and open qfil, select all rawprogrames with ctrl+a, and download!
7. After process, your phone go to download mode.
8. In LGUP, select refurbished, and join
(in this step i tried a few times without success. The process failed midway.
But after 2 attempts, success!)
FOR ME WORKS, I'm VERY GLAD! I PRAY A LOT, AND JESUS SAVE THE DAY. LOVE JESUS REALLY, GOD SAVE MY MONEY AFTER I PRAY.
andress722 said:
Friend i win this battle, follow this:
1. download the Korean KDZ
2. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
3. Download the v50unbrickbackup https://drive.google.com/file/d/13AJ8SnKmpOrTQF2EQ1odJK7-4qfUTIdF/view
4. join the folders with the images and the .bin
5. download .raw files that i make https://mega.nz/folder/dAYzySqA#IMxrMAZeBCaAuUZ_eFB6Uw
(notice that there is a mix of img and bin files.
This is due to missing some files from step 2)
6. put your cell in EDL and open qfil, select all rawprogrames with ctrl+a, and download!
7. After process, your phone go to download mode.
8. In LGUP, select refurbished, and join
(in this step i tried a few times without success. The process failed midway.
But after 2 attempts, success!)
FOR ME WORKS, I'm VERY GLAD! I PRAY A LOT, AND JESUS SAVE THE DAY. LOVE JESUS REALLY, GOD SAVE MY MONEY AFTER I PRAY.
Friend i try but.. Nothing just lose phone. i'm sick because this!
Click to expand...
Click to collapse
hello, I don't understand how to do it in step 2, the links are no longer there. can you re-explain? thank