Related
I have had my S6 for just one month and the fingerprint scanner has stopped recognizing my fingerprint. The device wont recognize my backup password or google account either. I am pretty sure my backup password is not incorrect and I know my google account information is correct as I still have access to it on my computer. I am able to use android device manager to call and send messages to the phone, but android device manager no longer has the unlock option. I have contacted google directly, but they were unable to provide any solutions. I have also contacted my service provider Sprint and Samsung with no success. I did not register with Samsung find my mobile prior to the incident. I don't have any of my files backed up to the cloud. I recognize that factory reset is the only option now, but I would like to create a backup or at least rescue some of my files before the reset.
I have wifi turned on, but USB debugging is turned off. When I connect to Samsung Kies or Smart Switch, I am prompted to unlock the device.
I have looked into using TWRP to recover files from the device, but I have read that the program no longer works with the S6 since the latest update.
Is there any way to pull files from the device while in recovery mode? Are there any other options available?
I am willing to compensate anyone who is able to help via PayPal
PACIFICPURPLE said:
I have had my S6 for just one month and the fingerprint scanner has stopped recognizing my fingerprint. The device wont recognize my backup password or google account either. I am pretty sure my backup password is not incorrect and I know my google account information is correct as I still have access to it on my computer. I am able to use android device manager to call and send messages to the phone, but android device manager no longer has the unlock option. I have contacted google directly, but they were unable to provide any solutions. I have also contacted my service provider Sprint and Samsung with no success. I did not register with Samsung find my mobile prior to the incident. I don't have any of my files backed up to the cloud. I recognize that factory reset is the only option now, but I would like to create a backup or at least rescue some of my files before the reset.
I have wifi turned on, but USB debugging is turned off. When I connect to Samsung Kies or Smart Switch, I am prompted to unlock the device.
I have looked into using TWRP to recover files from the device, but I have read that the program no longer works with the S6 since the latest update.
Is there any way to pull files from the device while in recovery mode? Are there any other options available?
I am willing to compensate anyone who is able to help via PayPal
Click to expand...
Click to collapse
Go back to Android Device Manager and select Lock Device. It should allow you to set a new password to get into the phone.
Theodric58 said:
Go back to Android Device Manager and select Lock Device. It should allow you to set a new password to get into the phone.
Click to expand...
Click to collapse
This results in an error message that says the device is already locked and so a new password will not be set
PACIFICPURPLE said:
This results in an error message that says the device is already locked and so a new password will not be set
Click to expand...
Click to collapse
Is it still asking for the backup password or is it just asking for the Google account?
Theodric58 said:
Is it still asking for the backup password or is it just asking for the Google account?
Click to expand...
Click to collapse
It's asking for both. When I enter the backup password wrong five times, it then asks for my Google account
PACIFICPURPLE said:
It's asking for both. When I enter the backup password wrong five times, it then asks for my Google account
Click to expand...
Click to collapse
Have you changed your google account password recently?
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Anyone? Still locked out of my phone. :crying:
Reboot normaly > go to settings > developer setting > oem unlock check yes
#gggirlgeek
Reboot normaly > go to settings > developer setting > oem unlock > check yes
I can't get into the phone at all. It is FRP (Google) locked because I did a factory reset from recovery. I can only manipulate it from PC or stock recovery. I have ADB, Odin and Samsung Kies on my PC if that helps.
What is the reason I am getting the ODIN error: "Complete(Write) operation failed"? Is it due to the FRP lock?
If not, would flashing the same stock firmware even help? (I have read that it's not possible to flash older firmware versions.)
Is the boot partition where the FRP status is stored? Is it possible to flash a new boot image to reset it?
I assume flashing a custom recovery would be useless? I doubt it could be done without USB debugging/ADB being enabled anyway.
One of the reason for that odin error is flashing an old build of stock ROM, your guess is right
Even if you are able to flash a stock FW via ODIN you'll still not be able to boot to your OS.
You have to login using the same google id that was previously logged in
OR you have to bypass the Google Account Login Screen.
There are varous method on youtube (i know you saw them) to bypass that screen (Side Sync method worked for me at the 10th attempt) inorder to install a 3rd party app either to
1. enable the developer option or enable OEM unlock ( to flash custom ROM or custom recovery)
OR
2. to overwrite the previous google account saved with your new account details. (THIS ONE HELPED ME)
WITH FRP LOCK ON, ODIN SHOULD NOT GIVE YOU ERROR ONLY IF YOU ARE FLASHING STOCK ROM. BUT STILL YOU WILL BE LOCKED WITH GOOGLE ACCOUNT LOGIN SCREEN BECAUSE OF FRP LOCK ON AND STOCK ROM
FRP info. is saved in Sboot. Flashing a new sboot works only for devices those were never upgraded to Android 6. For J7 2015 that was upgraded to android 6, flashing Sboot bricks the phone as said by a cell phone repair agent
Regards,
Sid
@saddam.khan999 : Thank you so much for replying. This is helpful. :highfive:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Tried different USB ports, and even different PC's to get it to pop up on the phone. Tried old usb drivers too. Sidesync never senses it, and My Computer only show MTP folder that won't accept any file pasted to it.
You did this with Android 6.0.1 October 2016 update? They fix more holes every time.
Also, can you give me the link to the unlock tutorial you used with Sidesync? Just want to compare my method.
Hi,
gggirlgeek said:
This is helpful. :highfive:
Click to expand...
Click to collapse
How grateful I am to read the above line! Thanks :good:
gggirlgeek said:
You did this with Android 6.0.1 October 2016 update?
Click to expand...
Click to collapse
Yes on Android 6.0.1 but i dont remember the build date.
gggirlgeek said:
Also, can you give me the link to the unlock tutorial you used with Sidesync?
Click to expand...
Click to collapse
I tired two different tutorials of SideSync to crack it. Once I reach home in the next 10 hours from now. I'll search on youtube and give u the links. Right now I cannot remember it.
gggirlgeek said:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Click to expand...
Click to collapse
I followed below step to fix popup issue
1. Uninstall all samsung apps like, Kies, SmartSwitch, SideSync everything.
2. Uninstall Samsung USB drivers
3. Install SmartSwicth (to get best drivers)
4. Now install SideSync (latest)
5. Open SideSync and check for OTA updates in your PC (update it if available)
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
gggirlgeek said:
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
Click to expand...
Click to collapse
@gsmDabbler this guy says he/she can solve FRP issue for 5$ on skype. I dont know if he's fake or real. Best of luck
1. At welcome screen push next.
2. Connect to wifi and push next.
3. Accept terms and conditions and push next
4. Attempt to sign in to your google account.
5. On loopback to sign in page, push back intel you see the welcome screen again.
6. Push emergency dialer.
7. Dial 112
8. Put in on speaker and when the disbatcher askes what is your emergency, quickly swipe where the speaker option is to your left and click on email.
9. Ask the disbatcher for the number for non-emergency. (EXTREAMLY IMPORTANT TO NOT SKIP THIS STEP)
10. Sign into your email.
11. Compose a new message.
12. On another device download drive.google.com/file/d/0B3quVdCaxqLfaG9VY2xjd3hhWmM/view?usp=drivesdk[/url]
13. Move this file to a microsd card, and put it into the j7.
14. Push attach
15. Locate your sdcard and select es file explorer.
16. Once attached to the email, click on the box inside the email that says es file explorer. If redirected to security setting check the box that says "Unknown Sources".
17. If then redirected to install screen for es file explorer, install app and skip the next step.
18. Push back intel your on the screen with your new composed email with attachment, and once again click on es file explorer, and then install...
19. After install, restart your phone.
20. On welcome screen, plug your j7 into a power source.
21. Toggle your power button off, and then back on.
22. Click on the far right last bubble.
23. On home screen of es file explorer, take the sdcard out of the j7 and put back into the extra device you downloaded es file explorer to, and download these 2 files.
drive.google.com/file/d/0B3quVdCaxqLfNVFvMHlOWnNnY2M/view?usp=drivesdk[/url]
&
drive.google.com/file/d/0B3quVdCaxqLfc0gyRTBTNGNXOTA/view?usp=drivesdk[/url]
24. Copy these files to your microsd card from earlier, and put back into your j7.
------------> continued to next post of mine!
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip"]J700TUVU2APJ3_J700TTMB2APJ3_TMB[/URL].tar.md5
Where I got firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip[/URL]
Click to expand...
Click to collapse
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
?guys...no.. just Go to settings tap build 7 times go to developer options, turn on oem unlock, turn on usb debugging.ta dah.
mohitmallick17 said:
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
Click to expand...
Click to collapse
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
victhesunshine said:
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
Click to expand...
Click to collapse
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Saw a same issue please check & follow this steps if it helps you some way.
Download the latest samfirm tool available on xda.
Open the samfirm tool. Enter model and region. Tick Auto and binary nature.
Click on Check update. It will show the latest firmware available on samsung server.
Then click on download. It will download four file full firmware. Then flash it through odin.
You need a strong internet connection to download the file.
fullofhell said:
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
Click to expand...
Click to collapse
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
hightech316 said:
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
Click to expand...
Click to collapse
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
fullofhell said:
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
Click to expand...
Click to collapse
Thanks.
Drivers are installed.
Just cannot move from the google sign in.
There is a guide that shows how to use a USB drive with a shortcut apk on it , hooked up via OTG and is able to open settings. Although that did not work for me as well...
Maybe N version is different than MM ?
Almost the same problem here.....but in my j700f, I can't boot to recovery at all...can't flash stock firmware also due frp locked
Model: MAH-L09C432B156
EMU: 5.0
Android Ver: 7.0 NOT ROOTED!
No access to Devlepoer options for USB Debugging
Hi I have a Huawei Mate 9 which is FRP locked, I have gained the unlocking code from Huawei and have all relevent software and instructions to unlock Bootloader and remove the FRP protecton but I am really struggling with connecting the device in CMD with adb.
I have drivers installed and have allowed connections to phone with HiSuite on device and PC, I am unable to get into Developer settings due to FRP protection bur according to what I have seen in every walkthrough shows that this should not be a problem, even though I am unable to enabe USB debugging. Anyway I did have it connected once but have not been able to since so if anone can tell me where i might be going wrong I would be grateful.
After resetting phone and following instuctions via Huawei to prepare device I hold Vol- and plug in USB to Boot into Fastboot/Recovery mode.
Open CMD and execute Adb.exe in command, after that I enter command \adb devices which gets deamon running but showing no device.
I have tried going into what settings I am able to enter and enable USB in any way possible but still to no joy.
I have looked at posts on here but not found anything that seems to help as yet or I have just not looked in correct place.
Please can someone help as this is frustrating. Thanks Stew.
If you entered fastboot already try "fastboot devices" instead of adb
Did you go into about phone and tap the "build number" 7 times to enable developer options? If so you should be able to access and enable USB debugging
Sent from my MHA-AL00 using XDA-Developers Legacy app
" I have gained the unlocking code from Huawei "
please could you tell me how did you get that frp unlocking code from stupid Huawei?
they didn't answer my emails for one month now!
jr313 said:
Did you go into about phone and tap the "build number" 7 times to enable developer options? If so you should be able to access and enable USB debugging
Sent from my MHA-AL00 using XDA-Developers Legacy app
Click to expand...
Click to collapse
frp lock doesnt matter if you dont have oem unlock permission it wont help try using HWOTA with unlock code
i am in same boat since a month now and unable to bring the device back to life as i dont have usb debugging enabled and oem unlock permission and phone is bricked through huawei own official app and firmware
This is an untouched copy of the recent update for our devices. It has no file extension from TCL, but I'll leave info on how to download the firmware originally below, with it mirrored to Android File Host. Can just open this file like a Zip file
Original Link from TCL grabbed with LogCat
Code:
https://g2slave-ap-north-01.tclcom.com/64c9b63f5a85fdd27b552eec614f884add8fdb67/54/586054
Mirror Link: https://www.androidfilehost.com/?w=files&flid=322525
I have tried patching the Boot.img.p with Magisk, but it doesn't recognize the file format. Renamed it to just boot.img, still won't patch
KaptinBoxxi said:
This is an untouched copy of the recent update for our devices. It has no file extension from TCL, but I'll leave info on how to download the firmware originally below, with it mirrored to Android File Host. Can just open this file like a Zip file
Original Link from TCL grabbed with LogCat
Code:
https://g2slave-ap-north-01.tclcom.com/64c9b63f5a85fdd27b552eec614f884add8fdb67/54/586054
Mirror Link: https://www.androidfilehost.com/?w=files&flid=322525
I have tried patching the Boot.img.p with Magisk, but it doesn't recognize the file format. Renamed it to just boot.img, still won't patch
Click to expand...
Click to collapse
Completely new to this phone. Nice grab! I was able to use your download and 7z zip to extract boot.img from boot.img.p.
I tried to put this file into magisk but no luck.
Have you been able to unlock the bootloader yet?
I tried the fastboot OEM unlock and fastboot flashing unlock when in bootloader mode but it doesn't work.
With someone else's help I was able to locate where the boot.img is located on the phone but unable to extract it.
/dev/block/bootdevice/by-name/boot
Backup boot.img via terminal one-line command
I am trying to make an image backup of boot. The script must work on any android. I think on any Android the boot location is /dev/block/platform/???/by-name/boot My command line find /dev/block/
android.stackexchange.com
Screenshots attached.
JayTM said:
Completely new to this phone. Nice grab! I was able to use your download and 7z zip to extract boot.img from boot.img.p.
I tried to put this file into magisk but no luck.
Have you been able to unlock the bootloader yet?
I tried the fastboot OEM unlock and fastboot flashing unlock when in bootloader mode but it doesn't work.
With someone else's help I was able to locate where the boot.img is located on the phone but unable to extract it.
/dev/block/bootdevice/by-name/boot
Backup boot.img via terminal one-line command
I am trying to make an image backup of boot. The script must work on any android. I think on any Android the boot location is /dev/block/platform/???/by-name/boot My command line find /dev/block/
android.stackexchange.com
Screenshots attached.
Click to expand...
Click to collapse
I did the same thing you probably did to attempt to patch it with Magisk, no luck. I haven't had the time to try further recently. Enabling OEM Unlock and attempting to unlock the bootloader just leads to needing an unlock code, much like bootloader unlocking a Moto device.
I contacted TCL support a long time back when I first got the phone and they were 100% not willing to help with any USA based TCL 10 Pro unlocking. The customer service worker literally said they weren't allowed to help with US based devices. There's no downloads anywhere for the firmware either, which I think goes against Google's agreement to android on a device, but I'm not 100% sure on that.
KaptinBoxxi said:
I did the same thing you probably did to attempt to patch it with Magisk, no luck. I haven't had the time to try further recently. Enabling OEM Unlock and attempting to unlock the bootloader just leads to needing an unlock code, much like bootloader unlocking a Moto device.
I contacted TCL support a long time back when I first got the phone and they were 100% not willing to help with any USA based TCL 10 Pro unlocking. The customer service worker literally said they weren't allowed to help with US based devices. There's no downloads anywhere for the firmware either, which I think goes against Google's agreement to android on a device, but I'm not 100% sure on that.
Click to expand...
Click to collapse
Android 11 for the TCL 10L has been being pushed in italy. This a large file about 2 to 3 GB. I really hope when we see it on our phones you are able to pull the link from logcat as well. This should be the entire rom. All we have now is OTA patch files. I've tried so many things. I have all drivers fully working even the Qualcomm 9008 Diagnostic driver. I can put the phone into EDL mode.
To put phone into EDL mode you need usb debugging enabled and type in secret code into the dialer *#*#3424#*#* which enables the diagnostic port via toast notification. Then turn phone off, hold both volume up and volume down and plug phone into PC. You will be prompted with the Download mode screen. Hold volume up to enter EDL.
There are ways to backup in EDL mode, I'm just not well versed in commands.
JayTM said:
Android 11 for the TCL 10L has been being pushed in italy. This a large file about 2 to 3 GB. I really hope when we see it on our phones you are able to pull the link from logcat as well. This should be the entire rom. All we have now is OTA patch files. I've tried so many things. I have all drivers fully working even the Qualcomm 9008 Diagnostic driver. I can put the phone into EDL mode.
To put phone into EDL mode you need usb debugging enabled and type in secret code into the dialer *#*#3424#*#* which enables the diagnostic port via toast notification. Then turn phone off, hold both volume up and volume down and plug phone into PC. You will be prompted with the Download mode screen. Hold volume up to enter EDL.
There are ways to backup in EDL mode, I'm just not well versed in commands.
Click to expand...
Click to collapse
I'm wondering if I can pull some social engineering off, maybe be like "Hey my phone reset itself, can't boot it, but I read online something for a samsung phone called Odin and Fastboot and such? Some how you can install the system that way?" See what they say/link me to
KaptinBoxxi said:
I'm wondering if I can pull some social engineering off, maybe be like "Hey my phone reset itself, can't boot it, but I read online something for a samsung phone called Odin and Fastboot and such? Some how you can install the system that way?" See what they say/link me to
Click to expand...
Click to collapse
Good luck to you.
I contacted TCL support myself with no luck. They immediately put my case in pending close status.
Is there a way this ZTE tool can be modified to work for our device?
Axon 7 EDL Tool - Flash / Backup / Restore / Unlock in the EDL mode
Axon 7 EDL Tool BAT-program for Flash / Backup / Restore / Unlock the phone in EDL mode Qualcomm HS-USB QDLoader 9008 (COM ...) !!! Whatever you do, you do at your own risk !!!" !!! If you are not sure of yourself do not use this program ...
forum.xda-developers.com
All partitions are detected in EDL mode.
JayTM said:
Is there a way this ZTE tool can be modified to work for our device?
Axon 7 EDL Tool - Flash / Backup / Restore / Unlock in the EDL mode
Axon 7 EDL Tool BAT-program for Flash / Backup / Restore / Unlock the phone in EDL mode Qualcomm HS-USB QDLoader 9008 (COM ...) !!! Whatever you do, you do at your own risk !!!" !!! If you are not sure of yourself do not use this program ...
forum.xda-developers.com
All partitions are detected in EDL mode.
Click to expand...
Click to collapse
I'll check it out. If its possible to view the code in a tool like dnSpy or extract files from the exe with 7zip, its possible to use with our device, i'm sure as long as the commands are similar
Well you're in luck as it is just a .bat file program simple notepad++ will do.
I will be following this thread with intrest, root could be the deciding factor in me purchasing this device.
Tech101yt said:
I will be following this thread with intrest, root could be the deciding factor in me purchasing this device.
Click to expand...
Click to collapse
Have had the phone for less than 6 months and I'm already having LCD issues. When the display is off, just sitting on a table or something, it'll flash white randomly like its getting an electric signal at random. Its nothing I did. I've never hard dropped the thing. Everywhere I go pretty much is carpeted except work. If manufacturer warranty doesn't cover me, I'll stop recommending the phone to people
I actually switched to an Essential Phone recently. Way better experience, way cheaper too. I have around a dozen of them anyway and have been selling em on swappa (dunno if I'm allowed to say that here, but oh well) lol
@KaptinBoxxi Sounds like you have Ambient Display on for notifications.
mschoolbus said:
@KaptinBoxxi Sounds like you have Ambient Display on for notifications.
Click to expand...
Click to collapse
Nah its turned off. It flashes like a broken LCD would look. All snowy and stuff like an old TV. Its not notifications, just a bad LCD
that sucks... could try reseating the screen's ribbon cable :-/
can anybody share the full update rom about android 11?
top170 said:
can anybody share the full update rom about android 11?
Click to expand...
Click to collapse
I don't believe anyone has Logcatted the update process yet to get the firmware, but on the subject of this post, I do have some updates
I was digging through my Logcat from january and realized I missed something massive. I have yet to figure out the URL structure, but I have all the info for it.
So when you go to the following link, it gives a bunch of errors of missing info
https://g2master-sa-east.tclclouds.com/notify_new.php
For the firmware here on this post at least, each value from my device is
Code:
id = 0156260
curef = T799B-2ALCUS11
vk = 741ace917e3527af81412ca93b0fcce2de04a264
salt = 1611977254070885419
fv = 4DJ1LM10
tv = 4DJBLMB0
op = 1000
status = 999
mode = 2
cltp = 10
type = firmware
formatted from logcat
reportContent= {"id":"0156260","salt":"1611977254070885419","curef":"T799B-2ALCUS11","fv":"4DJ1LM10","tv":"4DJBLMB0","mode":"2","cltp":"10","type":"Firmware","op":"1000","status":"999","vk":"741ace917e3527af81412ca93b0fcce2de04a264"}
no matter what, I get the errors on the web page
Hi guys,
I'm trying to unlock my Poco F3's bootloader. I'm doing good on the phone's part (enabling oem unlocking, usb debugging and connecting account and device), but on the PC side, not so much. When I try to use the Mi Unlock tool on my PC, there's 2 types of errors occurring, which depend on the Mi Unlock Tool version I'm using (I've tried several of them just to try to get them to work). The errors are:
1. After I log in to the Mi Unlock Tool, In Chinese text It says this: (attached screenshot)
I translated It, and the result was "You do not appear to be connected to the Internet Please refresh and try connecting to the network Tap to refresh"
2. The second error I am getting on the other version of the Mi unlock tool which is "Couldn't get Info[-1 Unknown error. Try again later". (Screenshot attached)
For context, I am using ADB setup 1.4.3 with the Mi Unlock tool, on Windows 11. I've tried downloading other Mi Unlock tool versions to see If it fixes the problem, but I get the one of the above 2 errors everytime. I've also tried using the XiaomToolsV2 to download any missing drivers, but nothing has changed. Send help pls.
Did you do this?
Spoiler: MiUnlock
Check that the firewall does not block the application, create a rule if necessary.
Put the Miflash folder at the root of the disk, run as administrator.
NOSS8 said:
Did you do this?
Spoiler: MiUnlock
View attachment 5881305
Check that the firewall does not block the application, create a rule if necessary.
Put the Miflash folder at the root of the disk, run as administrator.
Click to expand...
Click to collapse
thank you for replying, meanwhile while I was waiting I thought of giving it a try my bros pc (its newer and has much better processing capabilities). And magically for some reason it turned out pretty smooth, till the phone not connected page. I even got a popup to use the latest version of the unlock tool which I didn't get on my PC.
Now the problem here is that my PC doesn't recognize it. So to fix that I tried XiaomiToolV2 (so it can help the PC identify my device, as I saw ppl doing it on YouTube). though luckily XiaomiToolV2 managed to identify my device, but the problem I'm stuck at is the USB port. Ah, It got fixed after I reset the Pc after downloading the recommended firmware by XiaomiToolV2.
Just figured It out, the main reason for those errors is due to the filtering on my Wi-Fi my bro set up. It most probably was blocking the Mi Unlock Tool from properly communicating with the Internet. Somehow, my brother always uses a VPN (proton to be specific) on his PC at all times. I don't. So the first time I tried to setup the Unlock Tools on his VPNed PC, It went pretty smoothly than It did on my PC. Then I had tor restart it to install XiaomiToolV2 firmware. After I did that, I was getting the same error I was on my PC. Then I re-connected the VPN (as it was disconnected due to restart) and restarted the Mi Unlock Tool, and voila. magik.
Now the problem I'm stuck at is that I have to wait 166 more hours to be able to unlock It, as I connected my Mi account just 2 hours ago. I wasn't aware that the 168 hours timer starts from when I connect my acc, (my dumass thought the timer starts when you first bootup the phone after purchasing ). So there's that..
I was writing this reply while I was in the process, so the sequence you see in the first 2 paragraphs is me trying random stuff one after another. Sorry for the long post, and thank you for commenting/helping.
For people coming to this thread in the future looking for a solution to the same error ("Couldn't get Info[-1 Unknown error. Try again later") try using a VPN, it should fix the problem.
Alright, you solved the problem.
Xiaomi official tool is Mi Unlock not XiaomiToolV2.
Recommended to use a Usb2 port.
Yeah, thanks. I used the XiaomiToolV2 just so I can get the official tool to recognize my phone which It wasn't doing earlier