So this phone is basically abandoned, but since I have this phone along with some time(in future), I am working on its resurrection.
So, my project was initially based off of Cyanogen Mod 12.1, then with some libs found here and there, I am compiling RR Lollipop, only to fix various issues that wwwhana's CM12.1 had. Well I fixed, at least, the major bugs (in CM12.1 itself of wwwhana source).
My main target is to reach Pie of RR7 and yes it might take a long time, but who knows, it might be Q when this project gets done
Working-
RIL(Wifi, SIM 1, Data etc.)
GPS
NFC
Camera
All sensors except(see not working)
Not Working-
Accelerometer
Brightness Control
Offline Charging
Rest, the ROM is quite stable. And for the love of god, please don't ask me when this would be done, because I myself do not know this. Also, RAM Expander is used to give that 870MB of RAM some courage. If any of you want the same results(and same ROM), tell me, I will update this thread with the instructions.
For now, to keep you guys excited, here are some snapshots of what has been done till now (Even a theme is applied so yay).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
XDA:DevDB Information
Stable Lollipop/Pie For Xperia C3 Dual, ROM for the Sony Xperia C
Contributors
DS1884
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest Unlocked Lollipop Bootloader
Based On: CM,RR
Version Information
Status: Snapshot
Created 2019-07-13
Last Updated 2019-07-13
ask about the rom's link
DS1884 said:
So this phone is basically abandoned, but since I have this phone along with some time(in future), I am working on its resurrection.
So, my project was initially based off of Cyanogen Mod 12.1, then with some libs found here and there, I am compiling RR Lollipop, only to fix various issues that wwwhana's CM12.1 had. Well I fixed, at least, the major bugs (in CM12.1 itself of wwwhana source).
My main target is to reach Pie of RR7 and yes it might take a long time, but who knows, it might be Q when this project gets done
Working-
RIL(Wifi, SIM 1, Data etc.)
GPS
NFC
Camera
All sensors except(see not working)
Not Working-
Accelerometer
Brightness Control
Offline Charging
Rest, the ROM is quite stable. And for the love of god, please don't ask me when this would be done, because I myself do not know this. Also, RAM Expander is used to give that 870MB of RAM some courage. If any of you want the same results(and same ROM), tell me, I will update this thread with the instructions.
For now, to keep you guys excited, here are some snapshots of what has been done till now (Even a theme is applied so yay).
XDA:DevDB Information
Stable Lollipop/Pie For Xperia C3 Dual, ROM for the Sony Xperia C
Contributors
DS1884
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest Unlocked Lollipop Bootloader
Based On: CM,RR
Version Information
Status: Snapshot
Created 2019-07-13
Last Updated 2019-07-13
Click to expand...
Click to collapse
hey i have and xperia c3 dual too. can u give me this rom link??? thank u so much( my c3 dual is bootloop now so i need the link as soon as possible, pleas)
Rom link very needed
Hi, DS1884! You are so amazing and after reading this i'm still keeping in excited! Can i ask you the ROM link at that status as is is now? Pleeease :angel:
@lightmate @zundo083
Currently I'd love to give you the ROM link, but the ROM contains many unused libs and priv-apps with some Sony Bloat(so size is over 5GB!) so I'd suggest you these steps to get a stable CM experience-
First, flash TWRP from here - https://forum.xda-developers.com/sony-xperia-c/development/twrp-2-8-7-xperia-c3-c3-dual-t3277280
Second, flash this ROM- https://forum.xda-developers.com/so...rom-deodexed-bloated-rooted-5-0-2-c3-t3190737
Third, after wiping data, cache and dalvik, flash this ROM(SKIP STEP 2 IF U ALREADY HAVE STOCK OR ANY OTHER ROM INSTALLED) - http://forum.xda-developers.com/showpost.php?p=68389661&postcount=75
Lastly, when the ROM is perfectly booted, flash these images using fastboot,(AND AFTER FLASHING DON'T WIPE DATA,CACHE OR DALVIK OR TRICK WON'T WORK!!!!!) - http://www.mediafire.com/file/0bb73z56j8gblax/D2533-cm12.1-15120-by_HaNAst_aka_wwwhana.7z/file
Now, you will boot CM perfectly with no issues EXCEPT Brightness HAL and Accelerometer Sensor. You can use Kernel Adiutor tweaks for enhanced speed!
This will help you get same results as the ROM I am currently developing + more stable and fast.
The reason more things work is because of the fact that the camera libs and perms from Sony ROM gets replaced when data isn't wiped, thus making the camera, RIL etc. work!
Also, for the status, I'd say things would come out soon(tm) and that soon would be one year or so due to lack of testers and helpers and I'm only a beginner and also just one. But to answer your question, I compiled RR 5.5.4 for our C3 and things came out the same way, only its RR. Next I would compile Pie directly I'd say and that would be Havoc OS this time so yay. But to don't think that I am working regularly on this project and school's a thing! Further it would take a lot of time!
DS1884 said:
flash this ROM- https://forum.xda-developers.com/so...rom-deodexed-bloated-rooted-5-0-2-c3-t3190737
Click to expand...
Click to collapse
Is this really requires firmware 19.3.A.0.472 installed BEFORE attempting to install this software?
DS1884 said:
Third, after wiping data, cache and dalvik, flash this ROM - http://forum.xda-developers.com/showpost.php?p=68389661&postcount=75
Click to expand...
Click to collapse
As it turned out this is Deodex Patch for Xperia C3 (D2533). The author said that this will not work on other models. If i have the D2502 (2SIM model) this is not working solution for me?
@lightmate
Don't worry, just flash, don't watch any limitations, it will work just fine! Lest it should be D2533 or D2502, it doesn't matter much!
@DS1884
The second step link is not available at MEGA. Can you get any other link to [ROM][STOCK][D2533]Deodexed, De-Bloated, Rooted 5.0.2 for C3 D2533?
lightmate said:
@DS1884
The second step link is not available at MEGA. Can you get any other link to [ROM][STOCK][D2533]Deodexed, De-Bloated, Rooted 5.0.2 for C3 D2533?
Click to expand...
Click to collapse
I'd say that just flash step 4 link directly then!
Hello! I am the owner of the D2533. Very interested in your project. I'm waiting for news)
I will keep an eye on this thread :cyclops:
Update-
An RR Marshmallow 6.0.1 ROM is compiled and booted off of the same libs and kernel as of CM LP. It has the same bugs, except now the Brightness settings work.
Now, there is an additional bug that the ROM when booted up, may force reboot at random times, so I'd not share the link unless and until things get stable. My next target is 7.0 and when that gets done, I will release the lollipop, mm and nougat rom in seperate threads and will keep this thread for overall development, regardless of the stability because I understand you guys' curiosity. Also I am very aware about the speed of this project being very slow. The reason being I am working on it all alone so I am in need of testers(1-2). PM me if you want to be one. Just be aware that the project will only complete about around April, 2020 as I DO NOT spend my life in making this project happen.
The good news came again! ) Unfortunately i can't be tester because this phone is my the only phone )) Many apps permenent needed for work and communications and stability is the main thing i need. Honey is sweet, but the bee stings )
thanks a lot man i have been waiting for a custom for this device for a long time i used to the cannyogen mod 12.1 and some how firgued to fix the came by flashing it on the stock rom but i never was able to do any more becuse i dont know much about devepoping things and allany way waiting for your next custom rom for this device best of luck
---------- Post added at 11:57 AM ---------- Previous post was at 11:46 AM ----------
DS1884 said:
Update-
An RR Marshmallow 6.0.1 ROM is compiled and booted off of the same libs and kernel as of CM LP. It has the same bugs, except now the Brightness settings work.
Now, there is an additional bug that the ROM when booted up, may force reboot at random times, so I'd not share the link unless and until things get stable. My next target is 7.0 and when that gets done, I will release the lollipop, mm and nougat rom in seperate threads and will keep this thread for overall development, regardless of the stability because I understand you guys' curiosity. Also I am very aware about the speed of this project being very slow. The reason being I am working on it all alone so I am in need of testers(1-2). PM me if you want to be one. Just be aware that the project will only complete about around April, 2020 as I DO NOT spend my life in making this project happen.
Click to expand...
Click to collapse
did you used xposed or something if so the cm12.1 for xperia c3 is not compatable with supersu or xposed don't know about magisk though.any way keep up the good work
DS1884 said:
So this phone is basically abandoned, but since I have this phone along with some time(in future), I am working on its resurrection.
So, my project was initially based off of Cyanogen Mod 12.1, then with some libs found here and there, I am compiling RR Lollipop, only to fix various issues that wwwhana's CM12.1 had. Well I fixed, at least, the major bugs (in CM12.1 itself of wwwhana source).
My main target is to reach Pie of RR7 and yes it might take a long time, but who knows, it might be Q when this project gets done
Working-
RIL(Wifi, SIM 1, Data etc.)
GPS
NFC
Camera
All sensors except(see not working)
Not Working-
Accelerometer
Brightness Control
Offline Charging
Rest, the ROM is quite stable. And for the love of god, please don't ask me when this would be done, because I myself do not know this. Also, RAM Expander is used to give that 870MB of RAM some courage. If any of you want the same results(and same ROM), tell me, I will update this thread with the instructions.
For now, to keep you guys excited, here are some snapshots of what has been done till now (Even a theme is applied so yay).
XDA:DevDB Information
Stable Lollipop/Pie For Xperia C3 Dual, ROM for the Sony Xperia C
Contributors
DS1884
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest Unlocked Lollipop Bootloader
Based On: CM,RR
Version Information
Status: Snapshot
Created 2019-07-13
Last Updated 2019-07-13
Click to expand...
Click to collapse
Hello there. I'm an owner of a c3 and I'd like to ask how is progress in this project working out? has it been abandoned or are you still working on it?
Thanks for the download link @DS1884 for custom rom in xperia c3, I'll making video tutorial.
It is fully working now on.
Here's my tutorial step and video for installing Sony Xperia C3 Stable Cyananogenmod 12.1 ROM by @DS1884
Sony Xperia C3/C3 Dual CyanogenMod 12 Stable ROM
Hello this is @ruzukun02dev, here's how to install tutorial the CyanogenMod 12 Stable ROM on Sony Xperia C3. 😁 Credit to the original owner: @DS1884 Tested model on my device: D2533 / Xperia C3 (AOSP) Android Ver.: 5.1.1 CyanogenMod version...
forum.xda-developers.com
By the way, keep up and good work! @DS1884
Hi @DS1884,
Can you upload the latest files for this build? I installed CM 12.1 successfully but camera is not working. Also the link to old deodex ROM 'https://forum.xda-developers.com/so...rom-deodexed-bloated-rooted-5-0-2-c3-t3190737' is not working anymore. You can provide us a link for this if you have.
Please upload new build so that we can flash it, Just camera needs to work for me as other bugs can be ignored.
Hi All....
I am not very sure the android version of this rom....
If I follow the process of the installation....Will I get Android 5 or Android 9?
thank you for the kindly reply^^
So this rom is stable now, right?
Man you still working on this or left it behind..?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INTRODUCTION
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
The ROM is basically from three devices CM (base of Elephone P5000) it has been bought to CM11 Snapshot M11. It is stable and fast. Everything is working. It has been given base of M11 from Xperia SP (HuaShan) officially supported CM device.
ROM is good for everyday use.
SCREENSHOTS
ROM has been made stable without any sources It is port of three different CM11 ROM's as mentioned above. Kindly consider that as a big thing because this ROM was a nightly and I fixed every issue (mostly) alone, hit thanks don't leech
FEATURES
● Real CyanogenMod compiled from source
● Google Apps Integrated and working
● Added important apps already
● Android 4.4.4
● Init.d tweaks
● Pure CyanogenMod with no modding
● Dual Sim functionality
● Dual Sim data working
● CM Theme Engine support
● Based on Stable Snapshot CM11 of CyanogenMod ported from Xperia SP (HuaShan)
● Amazing RAM Management
● No Bloatwares
● Good Battery Backup
And much more! :good:
DOWNLOADS
CM11_Final_8x-1000
INSTALLATION INSTRUCTIONS
You should be rooted and have custom recovery installed. Follow ROOTING guide and install RECOVERY and follow next steps.
1) Download ROM
2) Keep it SD card and reboot to recovery.
3) Flash the ROM. No need to wipe anything though if you want you can but this ROM will do itself.
4) Will work with any recovery TWRP or CTR or CWM. Use your preferred recovery.
5) Reboot and enjoy
UPDATES
Nothing for now, Keep an eye here though. WIll be releasing every week possibly.
WORKING
● Everything, bluetooth, WiFi, Camera, Audio etc.
BUGS & TROUBLESHOOTING
● Your internal memory will be swapped with your external due to issue with boot.img trying to fix it. No worries though no data loss will occur. Make sure to keep your nandroid backup. If you have a 8 GB or 16 GB or more SD card then all good.
● When you are on a call after you are finished the screen lights are not turned on (firstly reboot twice after first boot, this will automatically fix any issue) for this goto Settings->Buttons->Choose power key ends call. Keep patience after enabling this feature and then make sure to remember this.
● No 3G option on SIM 2, only GPRS works. Don't worry though both sim work just fine.
● In some cases you may hear no ringtone on incoming calls, (might) activate vibration for this issue.
● No mass storage present only mtp and camera.
● Video Recording shows on inbuilt camera but doesn't start, Use 3rd party camera apps.
● Sound Recorder app shows "Internal Application Error", use 3rd party apps.
No other bugs.
FAQ
Q) I cannot wake my screen up after the call?
A) Keep pressed your power key for a long time (10-20 secs) and then read BUGS section.
Q) Will it work on my device?
A) No, you can't, it's only for XOLO 8x-1000 and clones.
Q) Can I port your ROM?
A) Of course. Sharing is Caring Feel free to port and mod just give proper credits
Q) I have this particular problem not mentioned?
A) Reply here and I will solve it.
CREDITS
@wsm for his CM11 for Elephone P5000
@CyanogenMod for the ROM
@pintothakur007 for his port for MMX Nitro
@carliv for his recovery
XDA for it's awesomeness
MediaTek for never sharing sources
XOLO for the device
If I left anyone please tell me I will add your name.[/COLOR]
FEW POINTS BEFORE USING THE ROM
● Please see you have some apps after you flashing. If you don't want that please manually uninstall them.
● Use any third party camera apps for good quality camera pics, I suggest Lenovo Camera or Google Camera.
● Don't install this ROM on any other device other than 8x-1000 or clones without porting or you'll brick your device.
● Always keep a nandroid backup ready in case if anything goes wrong.
NOTE: Kindly note do not mirror my files, if you want to share redirect them here. If you like my work consider donating me for my other projects and help me get my resources and credits for your donations. Thank you.
XDA:DevDB Information
CyanogenMod11 for XOLO 8x-1000 and clones (MT6592), ROM for all devices (see above for details)
Contributors
Tech N You
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod Snapshot M11
Version Information
Status: Stable
Current Stable Version: Snapshot M11
Stable Release Date: 2015-04-12
Created 2015-04-11
Last Updated 2015-04-11
Reserved.
Reserved Again.
Last one reserved.
does this rom work for Elephone P5000?
Does this rom work for Elephone P5000? I dont like the original rom for this device and i love CM, so it would be perfect if it works
patezno said:
Does this rom work for Elephone P5000? I dont like the original rom for this device and i love CM, so it would be perfect if it works
Click to expand...
Click to collapse
You need to do a cross port from cm11 of p5000
Sir i think gps is bugged? not clickable on notification drawer but can be opened in the settings..
Any fix?
Great work!
I follow some cm11 porta from elephone p5000 and hw vídeo acc and gps is not working.
Works con this?
ponchelete said:
Great work!
I follow some cm11 porta from elephone p5000 and hw vídeo acc and gps is not working.
Works con this?
Click to expand...
Click to collapse
Yes it does work
help please
hello sir,
Please guide me.....
Will this rom work for lava iris X8 without porting???
Specs look almost same for lava iris X8 and XOLO Hive 8X-1000 ???
What is with thl 5000 mt6592t?
Hi @Tech N You
Great Job with this ROM as well
Can we flash this on the InnJoo i2 as I had asked previously
Its a clone of X8 but with 1GB RAM & 8GB ROM (Similar to CherryMobile Excalibur)
Many thanks once again for your help
mohammad.nomaan said:
Hi @Tech N You
Great Job with this ROM as well
Can we flash this on the InnJoo i2 as I had asked previously
Its a clone of X8 but with 1GB RAM & 8GB ROM (Similar to CherryMobile Excalibur)
Many thanks once again for your help
Click to expand...
Click to collapse
I've ported it to innjoo i2.. but have alot of issues and have no time to fix it (because of exams).
camera, Bluetooth, wifi tether all of these are not working.. and little buggy..
will try to work on it after the exams...
M7ammad.eb said:
I've ported it to innjoo i2.. but have alot of issues and have no time to fix it (because of exams).
camera, Bluetooth, wifi tether all of these are not working.. and little buggy..
will try to work on it after the exams...
Click to expand...
Click to collapse
Thanks a lot for your update @M7ammad.eb
Much appreciated. Will wait for the final version to test
BTW, we already have the Philz recovery for this device now
I will update in the InnJoo page abt it asap
Best of luck for your exams
Following...
Back camera and flash not working on infinix zero.
Nevertheless, the rom is awesome. I love it.
Somebody put this ROM on Elephone P5000? It's working? Many bugs?
Thanks in advance.
How to fix stuck on bootanimation? thanks for the reply.
M7ammad.eb said:
I've ported it to innjoo i2.. but have alot of issues and have no time to fix it (because of exams).
camera, Bluetooth, wifi tether all of these are not working.. and little buggy..
will try to work on it after the exams...
Click to expand...
Click to collapse
Hi Ramadan Kareem to you
Hopefully you are done with ur exams
Any luck on this ROM update for Innjoo i2
Waiting eagerly for CM to glow in i2 [emoji7] [emoji7] [emoji7]
Sent from my R827 using Tapatalk
mohammad.nomaan said:
Hi Ramadan Kareem to you
Hopefully you are done with ur exams
Any luck on this ROM update for Innjoo i2
Waiting eagerly for CM to glow in i2 [emoji7] [emoji7] [emoji7]
Sent from my R827 using Tapatalk
Click to expand...
Click to collapse
Ramadan Kareem to you..
Well I'm done with my exams.. But honestly I've left this ROM as CM12.1 is available for us
But as soon as cm12.1 boot for me I might get back to this trying to solve some of its problems
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review.
IMPORTANT INFORMATIONS
We will not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our instructions word by word
are unfriendly
WIKI
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/cancro_Info
INSTRUCTIONS
First time installing CyanogenMod 13.0 to your Xiaomi Mi4:
Read the official Wiki page
Unlock your bootloader if you haven't done so already
Flash a custom recovery via Fastboot
Push GApps (arm) and the CM 13.0 zip to your device
Boot into Recovery
Perform factory reset
Flash the CM 13.0 zip from SD card
Flash GApps from SD card
Reboot (be patient, "optimizing apps" takes a while)
Upgrading from earlier version of CyanogenMod:
Push the new CM 13.0 zip to your SD card
Boot into Recovery
Flash the CM 13.0 zip from SD card
Flash the most recent GApps for Marshmallow if you are upgrading from 12.1
Reboot (be patient, "optimizing apps" takes a while)
DOWNLOADS
Lastest Nightly : http://get.cm/get/cancro-latest.zip
Lastest Recovery (Nightly) : [UR]http://get.cm/get/cancro-latest-recovery.img[/URL]
Lastest Snapshot : http://get.cm/get/cancro-snapshot.zip
Lastest Recovery (Snapshot) : http://get.cm/get/cancro-snapshot-recovery.img
-----------------------------------------------------------------------------
Google Apps (arm): wiki.cyanogenmod.org/w/gapps
All the builds: http://download.cyanogenmod.org/?device=cancro
BUGS
Report bugs for nightly builds at https://jira.cyanogenmod.org/browse/NIGHTLIES. Please keep in mind that bugs are expected on these builds. If you want something stable, choose the Snapshot branch. Before reporting any bug, make sure it has not been reported by someone else.
Current status:
Builds: nightlies, snapshots
Lastest Snapshot: ZNH0EAO2NJ
Will get next Snapshot: Yes
Known issues: none
Security (kernel): all CVE (Common Vulnerabilities and Exposures) are fixed
FAQ
I get error 7 while flashing this rom, what does it mean?
Read what the recovery says: "You're running on an unsupported (Kitkat) baseband". In order to flash the lastest CM builds you must have Miui MM baseband and partition layout installed. Visit http://bit.ly/cancroCMBaseband to learn how to update these
Does this rom work with Mi4 LTE?
This rom does not support the LTE variant of mi4, however you can flash it, but expect no support and more bugs compared to those who have the same rom on non-lte mi4. If you flash this rom on your Mi4, DO NOT report any issue you encounter
ROOT! ROOT! Give me root or i'll die!!! Where root is???
First of all do not flash any supersu/superuser/superman zip package to get root. Go to Settings>Developement Settings>Root access and select "Apps Only"
Are these gapps <insert random gapps package here> working with cm13?
Use the suggested package
Why no nightly today?
There was a compilation issue
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channel. This applies to 12.1 -> 13.0 too
Why no <insert miui feature here>?
Because this is CyanogenMod
Will you add <insert awesome feature here>?
I won't. If you want that, submit a commit to gerrit, where it will be reviewed.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[OFFICIAL] CyanogenMod 13.0 - Mi4 [cancro], ROM for the Xiaomi Mi 4
Contributors
linuxxxx
Source Code: https://github.com/cyanogenmod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2015-12-22
Last Updated 2016-05-30
Great to see we have it now. Hats off to the dev once again
ok up now.
i have cm13 now and recovery cm-13.0-20151225-NIGHTLY-cancro-recovery and cant install gapps.. open_gapps-arm-6.0-micro-20151212 . i use apple update emulator and i choice file and i hae error..
Ok. I installed CWM_recovery_r11_u1_cancro and changed partition size. Next TWRP-v2.8.7.0-cancro-20150621 and install cm and gapps and now work good
-Fc in sounds settings-> another sounds-> uncheck option and go back then fc
-Dont work mobile internet! Auto, manual, 3g 2g..
Work if enable in do development option still have mobile internet on
-Dont work mms
Does "NO Mi4 LTE SUPPORT!" mean that this ROM doesn't work at all (brick) or that if I have Mi4 LTE specific bugs I cannot complain here?
If it won't work, can you suggest a ROM similar to CM as openess and features? Thank you.
Sensors not working
I checked with sensor box the temperature and gyroscope isnt working and also the mac address did change every time i flash CM 12.1 and now CM 13 official both of them had this bugs any way to fix them?
To all Mi4 Lte-Cu user like me you will expect more bugs ok because the dev does not support our device atm.. This rom is best used for Mi3w/Mi4w
Battery charge dont work good.... Too slowly charging!! On miui i can play GC and battery charging up, but on cm when i play gc battery only down lvl... I must leave this rom
Now that MiUI based on 6.0 is out, shouldn't the blobs from that rom fix some of the driver issues? Or do we have to wait till Xiaomi updates cancro's sources to MM branch?
Anyway kudos to you @linuxxxx for cooking an almost perfect LP/MM rom out of KK sources.
i have charging problem . it takes up to 4 hours to complete charging if this problem resolved i have no problem using this GREAT rom i think power usage of android os is above normal compared to CM12.1
is there any kernel to flash on CM13 ? flashing another kernel may fix these broblems
hamedpc007 said:
i have charging problem . it takes up to 4 hours to complete charging if this problem resolved i have no problem using this GREAT rom i think power usage of android os is above normal compared to CM12.1
is there any kernel to flash on CM13 ? flashing another kernel may fix these broblems
Click to expand...
Click to collapse
It generally takes a while to completely implement QC Quickcharge in source built roms. Wait for a few days. Hopefully all these minor bugs will get squashed in the coming month or so. New proprietary MM blobs have already been added according to the commits. Therefore almost stable builds should start flowing in any time now.
Bugs with the latest update
Dear team ,
A major bug is effecting the usage of the rom as a daily driver . in the cellular network section where we select preferred network type it is stuck to LTE and unable to change it to 3g . Since the handset Mi4w does not support LTE band and hence the internet is stuck at 2g network only resulting in network issues .
Another bug is that cynogenmod team needs to split the mi3w and mi4w packages separately . reason in the latest update if you notice in the bluetooth section i am seeing mi3w where as i am using a mi4w .
kindly make the necessary changes mainly in the network section please
please do something do that duplicate contacts while using whatsapp.
I am using this Rom since a week; and definitely it can be used as a daily rom the only issue that's bothering is the slow charging.
HidekiRyuga said:
To all Mi4 Lte-Cu user like me you will expect more bugs ok because the dev does not support our device atm.. This rom is best used for Mi3w/Mi4w
Click to expand...
Click to collapse
Thanks for the report. I really hope one day LTE-CU/CT users will have a real alternative to MIUI.
Can someone post an update on the status of this ROM...? Can I use it as a daily driver..?
Dilshad969 said:
I am using this Rom since a week; and definitely it can be used as a daily rom the only issue that's bothering is the slow charging.
Click to expand...
Click to collapse
i'm kinda new to this device i just want to know the status of this rom. Did you tried it charging offline ? and is cm 12.1 snapshot build also has this problem ? please let me know so that i can flash a stable rom
All Sensors Disappeared after flashing CM 13 19-01-2016 BUILD
Every time when i flash CM 13, CPU-X show that there are no sensors available in my MI 4,
EDIT: I was able to fix this problem by following this Guide --> Solve-sensors-problems-xiaomi-mi-4
But now GYROSCOPE is not working, please suggest me any workaround for this problem.
gapss are not working
First of all thanks for this great ROM. When I tried to flash open gapps 6.0 it said unable to mount system partition .
Can I back to stock? How?
Disclaimer: I am not responsable of problems derivate of using the rom, I use myself, it worked great, and I shared it.
This is Resurrection Remix 5.5.9 (Android 5.1.1) for our Bluboo XFire, ported from http://www.pharaohs-team.com/2016/10/resurrection-remix-559-51mt6735.html, and using help of mtkroms and Google, lot of thanks to all
The rom works properly, Video playback and recorder, GPS (Not ever, but works), WiFi, Bluetooth, Games, Audio…
Its stable for daily use, and for me is better than stock, without losing nothing (It has Enginner mode and FmRadio inclusive)
It can have some minor bugs (Only I found is after installing gapps first reboot to desktop not works until opening settings, but then all right).
It comes in a zip file that can be flashed using "Recovery Carliv" from here too, or CWM/TWRP if you find one.
EDIT: If link for Recovery Carliv doesn't work, here are a copy.
Gapps are not preinstalled, you can download zip in opengapps.org and flash it after my zip
Enjoy!
----
Note: If you want to interchange internal and external SD for saving all by default in external, you can use Xposed Framework with XInternalSD
XDA:DevDB Information
Resurrection Remix 5.5.9 Xfire PORT, ROM for the Android General
Contributors
kprkpr, http://www.pharaohs-team.com, mtkroms
Source Code: https://www.needrom.com/download/resurrection-remix-5-5-9-port/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.x
ROM Firmware Required: Custom Recovery
Based On: Resurrection Remix
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2017-08-22
Created 2017-08-23
Last Updated 2017-10-03
thanks mate ,
would you help here , trying to port a rom an mtk6735m phone with no success
how did you do it
hey mate , i found a solution , and i port it to my phone , very cool my friends thanks ;
all the other roms had some problems with driver/firmware , this rom after only porting the boot.img
it works like a charm ,
Thank you for sharing, I was already using your stock-based rooted ROM, I think I'm going to upgrade to this new ROM… thanks for keeping our phones alive, I was starting to think about changing it
ice_ice said:
hey mate , i found a solution , and i port it to my phone , very cool my friends thanks ;
all the other roms had some problems with driver/firmware , this rom after only porting the boot.img
it works like a charm ,
Click to expand...
Click to collapse
Hi, I'm glad you ported it great
Normally I use the posts of mtkroms, but for this chipset I recommend some guide like this http://www.pharaohs-team.com/2016/10/resurrection-remix-559-51mt6735.html
With this mtk6735 I searched for a rom for this chipset there and modify using there guide and adding some other things
s3phy said:
Thank you for sharing, I was already using your stock-based rooted ROM, I think I'm going to upgrade to this new ROM… thanks for keeping our phones alive, I was starting to think about changing it
Click to expand...
Click to collapse
With this rom I was happy, but I still using again stock one because dual sim doesnt work right :crying:
I'm not actively using this phone, I use a THL 4000 (Older), but sometimes I use it, its a good phone, except my has the screen somewhat bad callibrated...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
Camera
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Video Playback
Audio
Sensors
GPS
Known issues:
None
Don't report about known issues, It will be ignored
Screenies?
Screens
Follow Instructions Carefully otherwise you will get error :
Flash latest TWRP Else you will get errors
Boot into your recovery
Wipe cache, dalvik's cache,system,data,internal storage
Flash ROM-Flash Gapps
Done-Reboot Now
Enjoy the clean rom
Downloads :
Don't forget to press thanks
Follow This Link Downloads
Source code:
ROM: https://github.com/lineageos/android
Device: dev-harsh1998/android_device_lenovo_a6000
Kernel: dev-harsh1998/kernel_lenovo_msm8916
Proprietary Vendor: dev-harsh1998/prorietary_vendor_lenovo
Our telegram group: Official Lenovo A6000 Dev & User Interaction chat
XDA:DevDB Information
LineageOS-16.0 for Lenovo A6000 and Lenovo A6000 Plus [UNIFIED], ROM for the Lenovo A6000/Plus
Contributors
dev_harsh1998
Source Code: http://github.com/lineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Hex Firmware Patch
Based On: LineageOS
Version Information
Status: Stable
Created 2019-03-02
Last Updated 2019-08-10
Frequently asked questions.
Q : I get error 255/7 while flashing from recovery
A : Flash using correct TWRP.
Q : How do i flash rom?
A : No rocket science Just wipe /system /cache /dalvik's cache & internal storage from twrp, Then simply flash the rom package and reboot.
Q : Can I dirty flash the next build?
A : If you are upgrading from previous builds of this rom to the current builds then O'course you can dirty flash by just flashing the new rom package , gapps package and wiping both the cache partition however i advice you to refrain from doing dirty flash. Follow the instructions if posted after a build drop and flash the package accordingly if instructions explicitly mention about clean flashing.
Q : Where do i get compatible gapps/ I can't signIn into google play?
A : Get your Gapps from OpenGapps.org, only use Pico or nano! If you want my support.
Q : Is root access included in this Rom?
A : No it is not. Some testers have had success with Magisk though.
Q : Can I flash ABC mod? Does the ROM support it?
A : Yeah sure, but I will not support you. And no, the ROM probably does not support it.
Q : Android go, when?
A : Decided to disable it for now for good
Q : Is VOLTE supported ?
A : No.
Q : Is the ROM suited for daily usage ?
A : Yes, Looks like all basic daily usage stuff is functional.
Q : WHEN UPDATE?? GIB UPDATE PL0X.
A : I only post updates when there's a decent list of changes. I'm a college student and there's only so much I can do. Please do not spam my PM regarding this.
I will not respond to any messages demanding ETAs
Nice, thanks a lot Dev
dev_harsh1998 said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
Camera
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Video Playback
Audio
Sensors
GPS
Known issues:
Selinux is permissive.
Don't report about known issues, It will be ignored
Screenies?
Screens
Follow Instructions Carefully otherwise you will get error :
Flash latest TWRP Else you will get errors
Boot into your recovery
Wipe cache, dalvik's cache,system,data,internal storage
Flash ROM-Flash Gapps
Done-Reboot Now
Enjoy the clean rom
Downloads :
Single build is compatible across all the A6000 variants!. That means same package is to be flashed on Lenovo A6000/Lenovo A6000 Plus & Lenovo A6000 SE, The package also works on Lenovo K30-T and Lenovo K3 Music lemon
Don't forget to press thanks
Follow This Link Downloads
Source code:
ROM: https://github.com/lineageos/android
Device: dev-harsh1998/android_device_lenovo_a6000
Kernel: dev-harsh1998/kernel_lenovo_msm8916
Proprietary Vendor: dev-harsh1998/prorietary_vendor_lenovo
Our telegram group: Official Lenovo A6000 Dev & User Interaction chat
XDA:DevDB Information
LineageOS-16.0 for Lenovo A6000 and Lenovo A6000 Plus [UNIFIED], ROM for the Lenovo A6000/Plus
Contributors
dev_harsh1998
Source Code:http://github.com/lineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Hex Firmware Patch
Based On: LineageOS
Version Information
Status: Stable
Created 2019-03-02
Last Updated 2019-03-02
Click to expand...
Click to collapse
nice ... thanxxx dev
baseband version unknown
Lenovo k30-t baseband version unknown, on Android 8.1,i have changed the baseband file to work correctly,this time i just fresh flash this rom follow installation steps
pine1212 said:
Lenovo k30-t baseband version unknown, on Android 8.1,i have changed the baseband file to work correctly,this time i just fresh flash this rom follow installation steps
Click to expand...
Click to collapse
It all depends upon the modem that you have flashed make sure you are on the hex firmware patch one else the basebandstring will show unknown but as long as you are getting network and you are able to make calls, data and text its not an issue. Check the screenshot section baseband string is properly displayed, just make sure you're on the correct firnware.
TTL Fix support?
tolya-666 said:
TTL Fix support?
Click to expand...
Click to collapse
TTL is enabled!
dev_harsh1998 said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
Camera
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Video Playback
Audio
Sensors
GPS
Known issues:
Selinux is permissive.
Don't report about known issues, It will be ignored
Screenies?
Screens
Follow Instructions Carefully otherwise you will get error :
Flash latest TWRP Else you will get errors
Boot into your recovery
Wipe cache, dalvik's cache,system,data,internal storage
Flash ROM-Flash Gapps
Done-Reboot Now
Enjoy the clean rom
Downloads :
Single build is compatible across all the A6000 variants!. That means same package is to be flashed on Lenovo A6000/Lenovo A6000 Plus & Lenovo A6000 SE, The package also works on Lenovo K30-T and Lenovo K3 Music lemon
Don't forget to press thanks
Follow This Link Downloads
Source code:
ROM: https://github.com/lineageos/android
Device: dev-harsh1998/android_device_lenovo_a6000
Kernel: dev-harsh1998/kernel_lenovo_msm8916
Proprietary Vendor: dev-harsh1998/prorietary_vendor_lenovo
Our telegram group: Official Lenovo A6000 Dev & User Interaction chat
XDA:DevDB Information
LineageOS-16.0 for Lenovo A6000 and Lenovo A6000 Plus [UNIFIED], ROM for the Lenovo A6000/Plus
Contributors
dev_harsh1998
Source Code: http://github.com/lineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Hex Firmware Patch
Based On: LineageOS
Version Information
Status: Stable
Created 2019-03-02
Last Updated 2019-03-02
Click to expand...
Click to collapse
i had to said that: this is best pie rom smooth and multaking.
i tried all pie rom on 1GB device. all not for 1 GB exept from this rom
But security not safe on locscreen i still can turn on wifi....
---------- Post added at 12:58 PM ---------- Previous post was at 12:53 PM ----------
dev_harsh1998 said:
TTL is enabled!
Click to expand...
Click to collapse
really best. Only this pie rom for 1GB. other pie rom not for 1GB. oh my god. i found. thanks. but not safe on lockscreen with pin security.
I finally find it! This is the best ROM for my(!) k30-w! It works perfect! Thanks for great job!
Pixxel007 said:
I finally find it! This is the best ROM for my(!) k30-w! It works perfect! Thanks for great job!
Click to expand...
Click to collapse
I thinks this rom supported K30T and...... so it perfectly for 1GB lenovo a6000. And all pie rom only support lenovo a6000 not perfect for 1GB device. so sad
How to disable tap2wake ?
Tell me how to disable tap2wake.. it was really annoying to me.
girishx5 said:
Tell me how to disable tap2wake.. it was really annoying to me.
Click to expand...
Click to collapse
I have added a node to disable double tap to wake under settings->display->TapToWake.
girishx5 said:
Tell me how to disable tap2wake.. it was really annoying to me.
Click to expand...
Click to collapse
Are you such a lazy guy to find it jus in display settings?
Can't you just ask where can i turn it off..who asked about your experience about it...there are many people with power button failure relying on that..its an excellent feature added by dev for this f_ _king old device..
Be gentle and requesting tone next time...else try to stick with stock awesome rom in lollipop
First of all Thanks to "Dev_harsh1998" This Rom is butter smooth and having great battery backup than the other Pie Roms (even better than Aicp). Only Problem is "SELinux" like dev mentioned about it and For me "Device Randomly rebooting some times while using"...And Thanks again Man..!
Chandru_113 said:
First of all Thanks to "Dev_harsh1998" This Rom is butter smooth and having great battery backup than the other Pie Roms (even better than Aicp). Only Problem is "SELinux" like dev mentioned about it and For me "Device Randomly rebooting some times while using"...And Thanks again Man..!
Click to expand...
Click to collapse
For the Selinux just go to the trust interface and hide the selinux status, Fixing the selinux to permissive would require me to write tons of sepolicy for this device and not forgetting that this device runs kitkat camera blobs, So yeah I am not planning on wasting hours doing sepolicy anyways, If you face random reboot drop me the console-ramoops of the device once you have had the reboot so I can look what happened and fix it.
Time for update(More perf bump!!! Enjoy!)
Read the changelog:- here!
Downloads?
Method 1:-
-> People on the previous build should be getting a OTA notification or can manually check for update via the updater app and can update from there.
Method 2:
Those who want to update manually can download the build from my basketbuild folder (Linked in the first post of this thread) flash it from recovery and reboot.
Clean flash?
If you are upgrading from previous build to the current build then there is no need of doing clean flash, Just simply flash the new package and reboot. If you are coming from some other rom you have to do a clean flash that includes wiping your internal storage else your bug reports would be ignored.
Regards,
Harsh!t Jain
@dev_harsh1998 Thanks man for this update.You are awesome.
dev_harsh1998 said:
Time for update(More perf bump!!! Enjoy!)
Read the changelog:- here!
Downloads?
Method 1:-
-> People on the previous build should be getting a OTA notification or can manually check for update via the updater app and can update from there.
Method 2:
Those who want to update manually can download the build from my basketbuild folder (Linked in the first post of this thread) flash it from recovery and reboot.
Clean flash?
If you are upgrading from previous build to the current build then there is no need of doing clean flash, Just simply flash the new package and reboot. If you are coming from some other rom you have to do a clean flash that includes wiping your internal storage else your bug reports would be ignored.
Regards,
Harsh!t Jain
Click to expand...
Click to collapse
Thanks man for this.
Too bad I've sold this device
You guys should be grateful for the dev
Sent from my Redmi Note 4 using XDA Labs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are very excited to announce the release of Paranoid Android Quartz, based on Android 10.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Code Aurora Forum Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Notice
As we are growing on our list of supported devices in each release, we require of a stronger build environment so we can speed up the compilation process for releases. Based on the actual Quartz 4 list, we support over 30 devices, which takes between 2 and 3 days for all the builds to be completed without counting possible compilation issues or rebuild needs, based on our current specs.
We kindly ask all of you that are in position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate on the link below:
Donate
Device-specific issues
You tell me.
Note: Custom kernels are NOT supported!
Requirements
Make sure you've latest stable firmware flashed on both the slots before flashing the ROM.
Download
Get the latest Xiaomi Redmi 6 Pro build Download
Changelogs
Keep an eye on our Twitter account, @paranoidaospa , as we will be posting about new features getting included in the release builds, as well as links to betas for those devices that will get them.
Paranoid Android Quartz released
Instructions
Reboot into twrp
Wipe data, cache, dalvik
Flash ROM package
Flash DFE (optional: if decrypted)
Reboot into system.
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Community (Telegram)
Help us improve PA by submitting detailed bug reports with logs. Learn how to take logs here.
Cheers and #StayParanoid!
XDA:DevDB Information
Paranoid Android, ROM for the Xiaomi Redmi 6 Pro
Contributors
herna
Source Code: https://github.com/AOSPA/android_kernel_xiaomi_msm8953
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: Quartz 3
Created 2020-06-11
Last Updated 2020-07-20
Does it work on Mi A2 Lite as well (Dual SIM) ? I'm from Brazil and as far as I know it's the same hardware. Cheers
Most awaited rom thank you, downloading.........
sudarsanragav said:
Most awaited rom thank you, downloading.........
Click to expand...
Click to collapse
How's the ROM and camera?
About bugs.
1. Night mode does not work. The screen doesn't get "warm".
2. Retro player is not stable. It closed with an error (once). Sometimes the sound is interrupted. This may be due to loading images with performers.
3. Not a bug. Lost feature with alarm clock and auto power-on when phone is off. It works on mokee ( for example)
4. Google recognizes the phone as Xiaomi mi a1.
I like the firmware. Very stable on first impressions. ::victory::victory::victory: I'll watch. One question. Why is there no FM radio?
USB debugging is not working even after enabling. In the terminal adb devices shows the device to be unauthorized. Please fix it.
Hotspot WIFI issues
Hello,
My hotspot WIFI can connect to other device but cannot connect to internet and the device is connected is 0.
Unable to check data usage
Hello. I installed this rom yesterday. And I'm liking it. But I can't see my data usage in settings. Usage is always 0.
I tried multiple apps to get internet speed and usage but none of them worked except one. Only app only showed wifi download speed... not mobile data. Will this be fixed by update or there is a work way around? I use metered internet so I need to keep track of usage.
It is great to see paranoid android for this device.?
Thanks for your hardwork dev.
Will try this on my wife's phone.
Slow chaging problem on kerminator kernel that you have attached with this rom on redmi 6 pro . Replace it please.
Night Mode Doesn't Work
I love this ROM very much. It is stable hardly any bugs. But the problem I face is with the night mode. The screen doesn't get warm. Please fix it.
I am used to "warm screens" and it irritates my eyes very badly.
Low Volume in earphones
Hi, the ROM is very stable but the only issue I face is very low volume in-earphones (Call + Songs). Kindly fix in the next update.
Redmi 6 pro
Hi devs
Can i go back to Android 9 from your Android 10 if i want in future to go back on miui 11 android 9 or miui 12 android 9...
Xiaomi.eu Rom
Because in Sakura device there is Anti rollback protection
???
Please help me with this Querry
Thank you!
ZackyyPackyy said:
Hello. I installed this rom yesterday. And I'm liking it. But I can't see my data usage in settings. Usage is always 0.
I tried multiple apps to get internet speed and usage but none of them worked except one. Only app only showed wifi download speed... not mobile data. Will this be fixed by update or there is a work way around? I use metered internet so I need to keep track of usage.
Click to expand...
Click to collapse
How you Go back on miui 11
Is there any problem to go back on Android 9 from Android 10?
just want to know about camera..
how is the camera in comparison with miui....and is their some other bugs in this rom...?
please let me know..
thankyou
herna said:
We are very excited to announce the release of Paranoid Android Quartz, based on Android 10.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Code Aurora Forum Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Notice
As we are growing on our list of supported devices in each release, we require of a stronger build environment so we can speed up the compilation process for releases. Based on the actual Quartz 4 list, we support over 30 devices, which takes between 2 and 3 days for all the builds to be completed without counting possible compilation issues or rebuild needs, based on our current specs.
We kindly ask all of you that are in position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate on the link below:
Donate
Device-specific issues
You tell me.
Note: Custom kernels are NOT supported!
Requirements
Make sure you've latest stable firmware flashed on both the slots before flashing the ROM.
Download
Get the latest Xiaomi Redmi 6 Pro build Download
Changelogs
Keep an eye on our Twitter account, @paranoidaospa , as we will be posting about new features getting included in the release builds, as well as links to betas for those devices that will get them.
Paranoid Android Quartz released
Instructions
Reboot into twrp
Wipe data, cache, dalvik
Flash ROM package
Flash DFE (optional: if decrypted)
Reboot into system.
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Community (Telegram)
Help us improve PA by submitting detailed bug reports with logs. Learn how to take logs here.
Cheers and #StayParanoid!
XDA:DevDB Information
Paranoid Android, ROM for the Xiaomi Redmi 6 Pro
Contributors
herna
Source Code: https://github.com/AOSPA/android_kernel_xiaomi_msm8953
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: Quartz 3
Created 2020-06-11
Last Updated 2020-07-20
Click to expand...
Click to collapse
i report for paranoid android quartz 4.
rom is great as before.
now the grayscale and reading mode is fixed.
and performance is good as previous one, but while using bluetooh headset for calling the mic is not working... its a major issue for me.
finally as suggested in telegram i flashed kerminator kernel some strange problems i noticed .
the phone automatically goes blank . i need to restart manually.
so far good rom thank you dev.......
sudarsanragav said:
i report for paranoid android quartz 4.
rom is great as before.
now the grayscale and reading mode is fixed.
and performance is good as previous one, but while using bluetooh headset for calling the mic is not working... its a major issue for me.
finally as suggested in telegram i flashed kerminator kernel some strange problems i noticed .
the phone automatically goes blank . i need to restart manually.
so far good rom thank you dev.......
Click to expand...
Click to collapse
Hey brother Can we go back on miui 11 eu rom after updating on Android 10 because miui 11 is based on Android 9
Anti rollback protection is protected by xiaomi
Please tell me if you know that
Thank you
DasananR said:
Hey brother Can we go back on miui 11 eu rom after updating on Android 10 because miui 11 is based on Android 9
Anti rollback protection is protected by xiaomi
Please tell me if you know that
Thank you
Click to expand...
Click to collapse
i think anti roll back is only for miui version . that is you cannot downgrade from miui 12 to miui 11. this not applies to custom
rom like android 10 to 9.
you can just flash fastboot images from mi flash tool.
Can someone please confirm if audio over bluetooth is working in this ROM
It's broken in pixel experience
if anyone tested the rom..please tell is camera2api enabled by default ...and do tell the bugs if any..
thankyou