Database Info

[Q] Having trouble flashing roms to my M8

I unlocked the bootloader, did s-off and rooted through weaksauce. However when I try to install a zip file from my SD card in the bootloader, it always ends up aborting the installation, I tried clearing the cache and even wiping all the data but it still doesn't install. I tried two different roms and I get the same problems which makes me think that I am missing something with the phone. Does anyone have any idea what the holdup may be?

Harpuajim said:
I unlocked the bootloader, did s-off and rooted through weaksauce. However when I try to install a zip file from my SD card in the bootloader, it always ends up aborting the installation, I tried clearing the cache and even wiping all the data but it still doesn't install. I tried two different roms and I get the same problems which makes me think that I am missing something with the phone. Does anyone have any idea what the holdup may be?
Click to expand...
Click to collapse
Not sure but your downloads could be having errors, mem card has issues or worse, your recovery is fault!!!

mashk said:
Not sure but your downloads could be having errors, mem card has issues or worse, your recovery is fault!!!
Click to expand...
Click to collapse
I'll try it with the phone storage or a different SD card later tonight. I'll also try a different ROM. When you say my recovery is fault what exactly do you mean? Is this something that can be fixed?

Harpuajim said:
I'll try it with the phone storage or a different SD card later tonight. I'll also try a different ROM. When you say my recovery is fault what exactly do you mean? Is this something that can be fixed?
Click to expand...
Click to collapse
What recovery are you using? I use CWM and works fine for me.

Harpuajim said:
I unlocked the bootloader, did s-off and rooted through weaksauce. However when I try to install a zip file from my SD card in the bootloader, it always ends up aborting the installation, I tried clearing the cache and even wiping all the data but it still doesn't install. I tried two different roms and I get the same problems which makes me think that I am missing something with the phone. Does anyone have any idea what the holdup may be?
Click to expand...
Click to collapse
Take a look in this section at the thread I started. See if you can flash Skyfall or any AOSP ROM I'm able to flash those fine but all of the GPE ROMS and a couple others will not flash for me either. All AOSP and AOKP stuff flashes fine. Skyfall and ViperOne will flash for me. I dont know what the hell is going on.

Did you flash SuperSU zip to get permanent root and get rid of weak sauce after you soffd and flashed your recovery?

silver04v said:
Did you flash SuperSU zip to get permanent root and get rid of weak sauce after you soffd and flashed your recovery?
Click to expand...
Click to collapse
You know what? I'll bet that's whats happening to me. I have a thread in this section with the same deal. Mine has been Rooted and UL/S-Off for a while now but during the rooting, UL/s-off process (Introductions and videos) not once was this ever mentioned. I lost root on an install of Nu Sense today but the entire install was wonky so I just thought it was that. Where can I find this SuperSU zip and how do I get rid of weaksauce? I used Firewater and weaksauce on mine. Or are you saying that once you flash the zip it takes over what weaksauce was doing?
I wonder why so many ROMs flashed properly for months now and it's just recently with these GPE Roms I'm seeing all this trouble.
---------- Post added at 07:14 PM ---------- Previous post was at 06:57 PM ----------
silver04v said:
Did you flash SuperSU zip to get permanent root and get rid of weak sauce after you soffd and flashed your recovery?
Click to expand...
Click to collapse
Well, I found it and flashed it so I guess we'll see if that was the problem. Got it off of Chainfires site.

Duckman_UF said:
You know what? I'll bet that's whats happening to me. I have a thread in this section with the same deal. Mine has been Rooted and UL/S-Off for a while now but during the rooting, UL/s-off process (Introductions and videos) not once was this ever mentioned. I lost root on an install of Nu Sense today but the entire install was wonky so I just thought it was that. Where can I find this SuperSU zip and how do I get rid of weaksauce? I used Firewater and weaksauce on mine. Or are you saying that once you flash the zip it takes over what weaksauce was doing?
I wonder why so many ROMs flashed properly for months now and it's just recently with these GPE Roms I'm seeing all this trouble.
---------- Post added at 07:14 PM ---------- Previous post was at 06:57 PM ----------
Well, I found it and flashed it so I guess we'll see if that was the problem. Got it off of Chainfires site.
Click to expand...
Click to collapse
Yeah, get rid of weak sauce app and flash SuperSU zip. Let me know if that fixes your problem. That would be an easy fix!

silver04v said:
Yeah, get rid of weak sauce app and flash SuperSU zip. Let me know if that fixes your problem. That would be an easy fix!
Click to expand...
Click to collapse
I dont have a weaksauce app???? I used a weaksause zip with ADB when rooting the device??

Duckman_UF said:
I dont have a weaksauce app???? I used a weaksause zip with ADB when rooting the device??
Click to expand...
Click to collapse
Oh, never mind then..I used the app way when I did mine. Let's see if you can flash a rom now! Haha

silver04v said:
Oh, never mind then..I used the app way when I did mine. Let's see if you can flash a rom now! Haha
Click to expand...
Click to collapse
lol....BRB!
---------- Post added at 07:38 PM ---------- Previous post was at 07:30 PM ----------
Duckman_UF said:
lol....BRB!
Click to expand...
Click to collapse
Nope...no such luck. One thing I forgot about is all these ROM's Root the device just before installing the kernal. Mines doung the same thing it always does on this one and Cleanrom....stck on "Trimming File system"....It will fail eventually.

Duckman_UF said:
lol....BRB!
---------- Post added at 07:38 PM ---------- Previous post was at 07:30 PM ----------
Nope...no such luck. One thing I forgot about is all these ROM's Root the device just before installing the kernal. Mines doung the same thing it always does on this one and Cleanrom....stck on "Trimming File system"....It will fail eventually.
Click to expand...
Click to collapse
Hmm.. That's true. So you can't even flash clean rom? Can you get anything flashed? Maybe try and fastboot flash twrp again. Or a different version of twrp than you have now?

silver04v said:
Hmm.. That's true. So you can't even flash clean rom? Can you get anything flashed? Maybe try and fastboot flash twrp again. Or a different version of twrp than you have now?
Click to expand...
Click to collapse
Take a look at my thread in this section and you'll see what ive been through
---------- Post added at 08:07 PM ---------- Previous post was at 08:02 PM ----------
Duckman_UF said:
Take a look at my thread in this section and you'll see what ive been through
Click to expand...
Click to collapse
It's weird. I have Nu Sense up and running but Ive lost Root again just as I did earlier today but everything that doesnt need Root is working. When this happens I never get an "Install complete" it just hangs on Trimming system files then eventually shuts off. I cant seem to get the binaries installed for SuperSU either.

Duckman_UF said:
Take a look at my thread in this section and you'll see what ive been through
---------- Post added at 08:07 PM ---------- Previous post was at 08:02 PM ----------
It's weird. I have Nu Sense up and running but Ive lost Root again just as I did earlier today but everything that doesnt need Root is working. When this happens I never get an "Install complete" it just hangs on Trimming system files then eventually shuts off. I cant seem to get the binaries installed for SuperSU either.
Click to expand...
Click to collapse
Flash the SuperSU.zip via recovery and you'll have root again!
Sent from my HTC One_M8 using XDA Premium 4 mobile app

mashk said:
Flash the SuperSU.zip via recovery and you'll have root again!
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not, install is corrupt.....You would have to read my entire thread to get an idea of all the BS i have going on lol! I'm sticking with AOSP right now until I figure out what's going on.

Duckman_UF said:
Unfortunately not, install is corrupt.....You would have to read my entire thread to get an idea of all the BS i have going on lol! I'm sticking with AOSP right now until I figure out what's going on.
Click to expand...
Click to collapse
Link?

mashk said:
Link?
Click to expand...
Click to collapse
One post up lol!
http://forum.xda-developers.com/verizon-htc-one-m8/help/flashing-problems-t2834991

Droid MAXX unlocked BL Custom Recovery?

I am sure that people have ran into this question with the Chinese Man coming back and the consumer editions becoming unlocked (if you are lucky enough to be a 2014 model) My question is, i currently have an unlocked bootloader Consumer Edition Droid MAXX running 4.4 from verizon. i am looking for the correct version of TWRP or another custom recovery (not safestrap) for this phone. i apologize if somebody else has posted a thread about this, but from my quick skimming of thread titles this does not seem to be clearly addressed. Also any insight on ROMs, etc would be appreciated after the custom recovery question is addressed. Thanks guys.

C4Charizard said:
I am sure that people have ran into this question with the Chinese Man coming back and the consumer editions becoming unlocked (if you are lucky enough to be a 2014 model) My question is, i currently have an unlocked bootloader Consumer Edition Droid MAXX running 4.4 from verizon. i am looking for the correct version of TWRP or another custom recovery (not safestrap) for this phone. i apologize if somebody else has posted a thread about this, but from my quick skimming of thread titles this does not seem to be clearly addressed. Also any insight on ROMs, etc would be appreciated after the custom recovery question is addressed. Thanks guys.
Click to expand...
Click to collapse
Here is a better way to make a nandroid backup along with twrp links.
http://forum.xda-developers.com/moto-x/general/fyi-online-nandroid-backup-ready-t2762382
---------- Post added at 12:07 PM ---------- Previous post was at 11:55 AM ----------
Here is latest
http://forum.xda-developers.com/showpost.php?p=54953458&postcount=120

aviwdoowks said:
Here is a better way to make a nandroid backup along with twrp links.
http://forum.xda-developers.com/moto-x/general/fyi-online-nandroid-backup-ready-t2762382
---------- Post added at 12:07 PM ---------- Previous post was at 11:55 AM ----------
Here is latest
http://forum.xda-developers.com/showpost.php?p=54953458&postcount=120
Click to expand...
Click to collapse
None of these worked. i effectively have no recovery currently. it says invalid size or something and boots directly to bootlloader

C4Charizard said:
None of these worked. i effectively have no recovery currently. it says invalid size or something and boots directly to bootlloader
Click to expand...
Click to collapse
Tell us exactly what you did, please?

aviwdoowks said:
Tell us exactly what you did, please?
Click to expand...
Click to collapse
I specifically attempted TWRP and used flashify to flash recovery image for 2.7.whatever . is it relevant I am running KK 4.4? I then attempted philz and it worked. But I feel more comfortable with twrp as its all I have ever used.

Are you rooted? How so if you have no recovery?
If rooted you must flash the .img with Rashr recovery tools.
---------- Post added at 09:35 PM ---------- Previous post was at 09:33 PM ----------
If Philz worked then redownload twrp.
Philz is great use my INI file to get started.

aviwdoowks said:
Are you rooted? How so if you have no recovery?
If rooted you must flash the .img with Rashr recovery tools.
---------- Post added at 09:35 PM ---------- Previous post was at 09:33 PM ----------
If Philz worked then redownload twrp.
Philz is great use my INI file to get started.
Click to expand...
Click to collapse
yes i am rooted untethered with write protection off. and if i can use philz to root then i will just stick with it. no need to fix what isnt broken

C4Charizard said:
yes i am rooted untethered with write protection off. and if i can use philz to root then i will just stick with it. no need to fix what isnt broken
Click to expand...
Click to collapse
Flash from recovery
http://download.chainfire.eu/supersu

aviwdoowks said:
Here is a better way to make a nandroid backup along with twrp links.
http://forum.xda-developers.com/moto-x/general/fyi-online-nandroid-backup-ready-t2762382
---------- Post added at 12:07 PM ---------- Previous post was at 11:55 AM ----------
Here is latest
http://forum.xda-developers.com/showpost.php?p=54953458&postcount=120
Click to expand...
Click to collapse
Read notes here as to a condition where twrp may not stick, or rather the phone acts as though it is not there & gives the Bootloader instead.
http://forum.xda-developers.com/showpost.php?p=54631556&postcount=1342

Got philz to work, all good! Thanks guys

I also have a consumer addition that's unlocked and couldn't get twrp 2.7 to load. Same error message too. I ended up going with twrp 2.6.31 - ghost-4.4 and it works fine.

[ROM] SU4TL-44 100% Stock

SU4TL-44 Stock Image for XT1254: https://mega.nz/#!v4QWiITb!_0jWWzE4KWCEgT__C36rYe0vaTzGKcEFsZm0vvBtLBg
Flash with TWRP.
This package will flash every image in the SU4TL-44 firmware package except for recovery. It should bring your phone to almost 100% stock. The only image that is not included is the recovery image, because that would overwrite TWRP. If you need the stock recovery, revert to stock by following section 0 of my guide: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684.
Yes, it does include modems.
No, it will not re-lock your bootloader.
No, it won't erase your data, but you should do a factory reset in TWRP after flashing this. You might be able to get away without it if you're coming from a modified stock rom, but if you leave out the factory reset after coming from a CM-based rom, you're gonna have a bad time.
Thanks to @firstEncounter for letting me incorporate his flashable zip into this package.

Will have to download this later. Looked to go back to stock and wait for mm to come out.
Sent from my XT1254 using Tapatalk

Just to be clear, this doesn't flash re-lock the bootloader, right? So it's just the ROM... correct?

schwinn8 said:
Just to be clear, this doesn't flash re-lock the bootloader, right? So it's just the ROM... correct?
Click to expand...
Click to collapse
No it won't relock boot loader just installed it you will not be rooted and twrp will ask you if you want to root before reboot if you click no and want to at a later point just go back into boot loader by doing vol down power combo from power off and select open boot loader and when you click to reboot it will ask you again if you want to root then you can just slide to install

schwinn8 said:
Just to be clear, this doesn't flash re-lock the bootloader, right? So it's just the ROM... correct?
Click to expand...
Click to collapse
Correct

Can I install viper and su along with this?

MazinDLX said:
Can I install viper and su along with this?
Click to expand...
Click to collapse
Sure. Just flash the rom first and the mods second.

TheSt33v said:
Sure. Just flash the rom first and the mods second.
Click to expand...
Click to collapse
Ok last night I tried this in this order.
TWRP Backup & ADB Pulled Back-up folder
I then went into TWRP and wiped everything
ADB Pushed the image onto the phone
Installed, wiped dalvik & rebooted into a bootloop of the Motorola Symbol

MazinDLX said:
Ok last night I tried this in this order.
TWRP Backup & ADB Pulled Back-up folder
I then went into TWRP and wiped everything
ADB Pushed the image onto the phone
Installed, wiped dalvik & rebooted into a bootloop of the Motorola Symbol
Click to expand...
Click to collapse
I've never tried to install an image via ADB before. Did you mount the image elsewhere and extract the system folder, and then ADB-pushed that? If not, your bootloop is probably because there's just a big, unextracted system.img on your system partition, and not the actual files within it. Why not just flash it with TWRP? When I tested it, I flashed it via TWRP and it worked.
If you really don't want to flash it via TWRP for some reason, you can extract the system.img from the zip and flash it using fastboot (fastboot flash system system.img).
EDIT: Oh wait, I think I understand now. You just used ADB to put the zip on your phone, and then you installed it with TWRP. Got it. Well my next question is why use ADB at all? Why not just plug in your phone while it's booted into TWRP and use the native MTP to transfer files?

Its chromeos ****, and I'm just a fan of cmd line.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
I'm going to try again later, after wiping everything X5 and reinstalling CM12.1.
Its flawless.
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
CM12.1 is flawless that is.

The boot.img should probably be included as well for people flashing this from a custom ROM, otherwise they will experience a boot loop.

MazinDLX said:
Its chromeos ****, and I'm just a fan of cmd line.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
I'm going to try again later, after wiping everything X5 and reinstalling CM12.1.
Its flawless.
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
CM12.1 is flawless that is.
Click to expand...
Click to collapse
This package only flashes /system. CM flashes its own boot.img, which is why this isn't working for you. I'll try to find some time tonight to add in the other images in the stock firmware to this package. Sorry about that.

firstEncounter said:
The boot.img should probably be included as well for people flashing this from a custom ROM, otherwise they will experience a boot loop.
Click to expand...
Click to collapse
Great minds think alike. Do you know if boot.img will cover it, or are there other partitions that are flashed by CM that need to be included as well?

TheSt33v said:
Great minds think alike. Do you know if boot.img will cover it, or are there other partitions that are flashed by CM that need to be included as well?
Click to expand...
Click to collapse
Nope, just boot and system.
Feel free to include the bootloader/radio package from my thread into your zip if you'd like to make this equivalent to flashing a full stock firmware.

MazinDLX said:
Its chromeos ****, and I'm just a fan of cmd line.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
I'm going to try again later, after wiping everything X5 and reinstalling CM12.1.
Its flawless.
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
CM12.1 is flawless that is.
Click to expand...
Click to collapse
I updated the link. It now flashes boot.img in addition to system.img. It should work for you now.

firstEncounter said:
Nope, just boot and system.
Feel free to include the bootloader/radio package from my thread into your zip if you'd like to make this equivalent to flashing a full stock firmware.
Click to expand...
Click to collapse
I'm not entirely sure how to write a script to flash those in TWRP. For boot and system, it's easy because the devices that they are flashed to match the names used by fastboot. Bootloader and radio seem to be a little different though. When I list the contents of /dev/block/bootdevice/by-name, there is no "motoboot" or "radio," which is what fastboot uses when you flash these. I do see "aboot" and "modem," and I'm pretty sure those are the targets I'm looking for, but I don't want to go flashing things unless I'm 100% sure. Since there's not a huge demand for figuring that out, and boot + system is all people will need in 99% of cases, I'll leave them out. Thanks though!

Downloading, my XDA hasn't been functioning right lately and I don't get get notified of the 3778328 threads I'm subscribed too lol
---------- Post added at 10:15 PM ---------- Previous post was at 10:13 PM ----------
Thanks for the quick responses, you got a tip jar link?

MazinDLX said:
Downloading, my XDA hasn't been functioning right lately and I don't get get notified of the 3778328 threads I'm subscribed too lol
---------- Post added at 10:15 PM ---------- Previous post was at 10:13 PM ----------
Thanks for the quick responses, you got a tip jar link?
Click to expand...
Click to collapse
No, but I appreciate the thought. Donate to this guy instead. He does way more than me and also needs it way more than me: http://forum.xda-developers.com/droid-turbo/development/computerfreekunlocked1-0-t3255945

TheSt33v said:
I updated the link. It now flashes boot.img in addition to system.img. It should work for you now.
Click to expand...
Click to collapse
Thus really helped for whatever reason after altering the fxz xml so I wouldn't lose data rsd lite said the xml files didn't match. I have done this before with no issues. I couldn't take the recent Ota because somehow the system was modified. I am guessing it was something from sunshine. I never rooted the phone just unlocked so I don't know how anything was modified. This made it so much easier flashed it flashed stock recovery and took ota thanks.

bigv5150 said:
Thus really helped for whatever reason after altering the fxz xml so I wouldn't lose data rsd lite said the xml files didn't match. I have done this before with no issues. I couldn't take the recent Ota because somehow the system was modified. I am guessing it was something from sunshine. I never rooted the phone just unlocked so I don't know how anything was modified. This made it so much easier flashed it flashed stock recovery and took ota thanks.
Click to expand...
Click to collapse
Awesome! That's why we do this

Stucked on bootloader message while charging

Hi!
My Oneplus 6 is rooted and since I updated it to Pie I have a problem. When I plug my (off) phone in order to charge it, it will start but get stuck on the "bootloader is unlocked..." message, never moving on. However if not plugged the message will appear for a few seconds and the phone will start normally. Also, if I plug it while on, there won't be any problem, the phone will charge. On other aspects the phone is doing great and the root is working well.
Any thought?
Thanks a lot,
Corto

Hi, how did you root?

CoffeeMachineSwitch said:
Hi, how did you root?
Click to expand...
Click to collapse
Hi! Thanks for your answer. I used the oneplus.gadgethacks's guide to root (unlocked the bootloader, installed TWRP, Magisk Manager App, then booted into TWRP to install Magisk).
When Pie was released, I booted into TWRP to install the official Pie ROM (9.0.1 cause I have a French phone) then installed the last TWRP Installer, changed the slot (A to B) before rebooting, and booted again in TWRP to install Magisk, before wiping the cache.
I did it two days ago and except for the problem I raised everything is working great and the root it still working!

Up!

Its a normal bug since OB4, mostly happening on custom kernels

byReqz said:
Its a normal bug since OB4, mostly happening on custom kernels
Click to expand...
Click to collapse
Thanks for the answer! So I'm just waiting for a new firmware update?

CortoMaItese said:
Thanks for the answer! So I'm just waiting for a new firmware update?
Click to expand...
Click to collapse
Today i updated to last OOS 9.0.2 using twrp, after i flashed twrp and magisk. All works fine, but i have the same issue, stuck at bootloader and no charging. To charge it, i have to power on and after plug the cable.
Inviato dal mio ONEPLUS A6000 utilizzando Tapatalk

Same here

Same. 9.0.2.

Anyone tried a custom Kernel?

Since 9.0.2 same Problem

I tried Blu Spark Kernel r51. No change.

Yes it is kernel related. Because without kernel it charges. I already tried with 3 different kernel and it happens with all of them

I had this issue as well but not anymore..am not sure what's I changed...am on Open beta 6. Try making sure frimware is up-to-date on both slots.in recovery Flash oos then twrp...reboot into twrp then flash oos then twrp again then boot.

Yes. What magisk version are you using.. version 17.3 or 17.1 cause this issue.. try magisk cannary build 17.4 .I am also in pie stable 9.02 and I did fix it with this version

Iwas on Magisk 17.1 and tried your uploaded Magisk Version.
Issue still present.
I'm on 9.0.2 with blu spark Kernel.
Later i will reflash my Rom an try it with the original kernel.
---------- Post added at 05:22 PM ---------- Previous post was at 04:54 PM ----------
I reflashed the Rom with the actual TWRP and used the original kernel from 9.0.2 with Magisk 17.4.
Nothing changed. Issue is still there.

TheMAD1980 said:
Iwas on Magisk 17.1 and tried your uploaded Magisk Version.
Issue still present.
I'm on 9.0.2 with blu spark Kernel.
Later i will reflash my Rom an try it with the original kernel.
---------- Post added at 05:22 PM ---------- Previous post was at 04:54 PM ----------
I reflashed the Rom with the actual TWRP and used the original kernel from 9.0.2 with Magisk 17.4.
Nothing changed. Issue is still there.
Click to expand...
Click to collapse
Strange. I am on 9.02 ROm, stock kernel , and flash This MAgisk version 17.4 and I can charge my phone normally. I know is a magisk issue, because if you go to the Magisk cannary build section , the developer is aware of this issue. Also happens in Pixel Phones
---------- Post added at 06:13 PM ---------- Previous post was at 06:12 PM ----------
Rogue8o8 said:
I had this issue as well but not anymore..am not sure what's I changed...am on Open beta 6. Try making sure frimware is up-to-date on both slots.in recovery Flash oos then twrp...reboot into twrp then flash oos then twrp again then boot.
Click to expand...
Click to collapse
Are you root ???.. Or only TWRP..?? MAgisk is causing this issue

Am rooted...magisk 17.3

You are right, it is a Magisk problem. I uninstalled Magisk and now i can charge my phone switched off.
I will try to reinstall 17.4
---------- Post added at 07:10 PM ---------- Previous post was at 06:49 PM ----------
After reinstalling Magisk 17.4 the issue is present again.
Perhaps there is a difference from which slot you are booting.
Just guessing.

TheMAD1980 said:
You are right, it is a Magisk problem. I uninstalled Magisk and now i can charge my phone switched off.
I will try to reinstall 17.4
---------- Post added at 07:10 PM ---------- Previous post was at 06:49 PM ----------
After reinstalling Magisk 17.4 the issue is present again.
Perhaps there is a difference from which slot you are booting.
Just guessing.
Click to expand...
Click to collapse
MAybe i should wipe everything and install Beta 6 and try with 17.4, But the developer of magisk is already aware of this issue and is working on a solution

HTC U12+ Bootloop after uninstalling Magisk Module

Hello everyone.
As mentioned above, my HTC is stuck in a Bootloop (Unlocked warning, white HTC Icon, and again) after I uninstalled a Magisk Module via Magisk Manager. I have no TWRP Recovery installed. Any advise how to get the phone operational again? In case of a full reset of data and storage, i am not afraid to do so. Any help is much appreciated.
Greetings
Stefan
*Edit*
I just noticed that adb doesn't recognizes the Phone via command adb devices. Therefore I'm not able to flash a ruu for my phone. Now I have no idea left what to do

Stefan-Duisburg said:
Hello everyone.
As mentioned above, my HTC is stuck in a Bootloop (Unlocked warning, white HTC Icon, and again) after I uninstalled a Magisk Module via Magisk Manager. I have no TWRP Recovery installed. Any advise how to get the phone operational again? In case of a full reset of data and storage, i am not afraid to do so. Any help is much appreciated.
Greetings
Stefan
*Edit*
I just noticed that adb doesn't recognizes the Phone via command adb devices. Therefore I'm not able to flash a ruu for my phone. Now I have no idea left what to do
Click to expand...
Click to collapse
you can flash from sd card
---------- Post added at 11:29 AM ---------- Previous post was at 11:26 AM ----------
tolgazorba said:
you can flash from sd card
Click to expand...
Click to collapse
You can find the same software number at the top of the device or the numbered software in the android file host ziand folder

Hello @tolgazorba.
Thank you for your answer. Right now I'm heading to work, but I will try your Advise this evening. Fortunately i downloaded a ruu zip matching with my firmware (2.55.bla bla) and matching with my cid as well. I will report if everything worked, or, hopefully not, not.
Thanks again
Stefan

hello
no problem I would like to explain in detail but my english is very bad

Hi there. That advice was great, everything works now fine again. I guess I let my hands off rooting for now, at least there's an official LOS for this device lol
Thanks again

En joy
You're welcome

I have little similar problem. I bricked phone after updating magisk.
Then I tried to flash original boot.img but didn't know which slot A or B so flashed both. Unfortunately, it doesn't help.
Please help me

Merhaba
are you serious
---------- Post added at 06:49 PM ---------- Previous post was at 06:48 PM ----------
lulonen said:
I have little similar problem. I bricked phone after updating magisk.
Then I tried to flash original boot.img but didn't know which slot A or B so flashed both. Unfortunately, it doesn't help.
Please help me
Click to expand...
Click to collapse
because I need help with something
---------- Post added at 06:55 PM ---------- Previous post was at 06:49 PM ----------
my problem is that i can't assign custom rom to your device why do you think

I thinked that's because of slots

Hi
buddy what exactly is the problem

completely don't know how to solve it.
bootimg flashed over TWRP, now i have original boot.img and cant start temporary recovery.

lulonen said:
completely don't know how to solve it.
bootimg flashed over TWRP, now i have original boot.img and cant start temporary recovery.
Click to expand...
Click to collapse
Maybe just flash actual firmware.zip with sdcard as i have done? With that you are back on full stock and you can root again etc...

Thx. unfortunately, I don't have a backup of one important app which is more important than the whole phone so I want to find every possibility without losing data.

hi
lulonen said:
Thx. unfortunately, I don't have a backup of one important app which is more important than the whole phone so I want to find every possibility without losing data.
Click to expand...
Click to collapse
You are a very old user, I think you know how to do it

Hi
full rom viper twrp with temporary rom flash without wipe i not temporary to permanent summer device

can't boot TWRP and dont have stock rom without wipe.
Don't you know why I can't boot temporary TWRP? download mode always stuck at booting

so find a backup of the auto and load it with adb sideload, whichever version you have is the backup of that version
---------- Post added at 04:09 PM ---------- Previous post was at 04:03 PM ----------
https://androidfilehost.com/?fid=6006931924117931578

isn't full wipe?
don't remember but EU version (043). I am on LeeDrOiD U12 V1.3

re-install the same rum without deleting or update it with adb sideload

tolgazorba said:
so find a backup of the auto and load it with adb sideload, whichever version you have is the backup of that version
---------- Post added at 04:09 PM ---------- Previous post was at 04:03 PM ----------
https://androidfilehost.com/?fid=6006931924117931578
Click to expand...
Click to collapse
If I only had a backup different to TWRP.... ;-(