NXT-L29 TWRP installed without error but isn't accessible - Mate 8 Q&A, Help & Troubleshooting

Hi. I unlocked bootloader and flashed twrp via fastboot, but when I try to boot into it, the phone gets stuck at "your phone is booting now". The stock recovery no longer works. The phone's never been updated, still on Android 6.0 and EMUI 4.0. I tried several twrp versions with the same effect. What am I doing wrong? Can dm-verity be somehow interfering with twrp? Any ideas? Thanks in advance.
Code:
fastboot flash recovery twrp-3.0.2-0-next.img
target reported max download size of 471859200 bytes
sending 'recovery' (22020 KB)...
OKAY [ 0.701s]
writing 'recovery'...
OKAY [ 0.129s]
finished. total time: 0.830s

Months later I tried the same, also NXT-L29
Endless:
"Your device has been unlocked and can't be trusted....."
Your device is booting now...
Any solution please?

Related

[SOLVED] Needed Stock Recovery for EVA-L19

Hi,
after having TWRP, the factory reset function won't work since the data partition isn't recognized yet. Does anyone have the stock recovery version for this?
i already tried downloading from http://huaweidevices.ru/huaweiserviceworkarchivehuawei/eva-l19/recovery.img but it fails with the below message:
fastboot.exe flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (35180 KB)...
OKAY [ 1.318s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 1.318s
edit: found out the issue was related to the allow OEM unlock as turned off
is your bootloader still unlocked?
4Fighting said:
is your bootloader still unlocked?
Click to expand...
Click to collapse
Yups, still unlocked bootloader and currently on twrp recovery, but will need stock recovery if any operations like upgrade or factory reset needs to be done.

Need help with bricked Honor 8

EDIT: Guys it worked. Some weird **** happened first, keyboard wasn't working on stock rom and everything was buggy but after an update with HiSuite and a factory reset everything works fine. Thank you for all your support.
I bricked my Honor 8 (FRD-L09) while trying to go back to stock rom. I can only acces eRecovery and Fastboot, when I try to access normal recovery, the screen just freezes at "Your device is booting now". After reading multiple guides, I tried unbricking with the Huawei Multitool but I always get these errors:
sending 'boot' (15464 KB)...
OKAY [ 0.334s]
writing 'boot'...
OKAY [ 0.371s]
finished. total time: 0.710s
target reported max download size of 471859200 bytes
sending 'cust' (433554 KB)...
OKAY [ 9.343s]
writing 'cust'...
FAILED (remote: partition error)
finished. total time: 9.358s
target reported max download size of 471859200 bytes
sending 'recovery' (36996 KB)...
OKAY [ 0.794s]
writing 'recovery'...
OKAY [ 0.883s]
finished. total time: 1.682s
target reported max download size of 471859200 bytes
sending sparse 'system' 1/6 (435393 KB)...
OKAY [ 10.280s]
writing 'system' 1/6...
FAILED (remote: sparse flash write failure)
finished. total time: 10.327s
I'm desperate and I don't know what to do.
EDIT: I HAVE MANAGED TO INSTALL RR BUT STILL CAN'T GO BACK TO STOCK.
Rommco05 said:
Hi, what about twrp u loos access?
Click to expand...
Click to collapse
I have regained access to twrp. I have installed a custom rom, but still can't install stock rom.
Rommco05 said:
Your hole model number is? U try yo flash stock rom via twrp?
Click to expand...
Click to collapse
FRD-L09. I haven't flashed stock rom via TWRP. I tried the huawei extractor method right now, I'm probably doing something wrong, I'll look more into it . I'm calm now that I managed to install a custom rom.
Rommco05 said:
Ok, so if still without luck try to download full stock fw B360 or B381 (2 zips)
Click to expand...
Click to collapse
Ok.. I will try that. My phone is stuck at "your device is booting up" screen after flashing stock recovery.
Note that there is also recovery2 in first update.zip when you extract it via Huawei Multitool. Thats probably why recovery never boots up, it's not all. Try to send the first basic ones - boot, recovery, recovery2, erecovery, and so on (don't exactly remember which). Then you should be fine to dload or flash the rest through fastboot (if possible). And remember to always use full-ota-mf-pv version of software (like FRD-L09C432B381) with about 2.37 GB total (2 zip files).
Rommco05 said:
You can flash back twrp?
Click to expand...
Click to collapse
Yes, I can.
So, did it work?!
PalakMi said:
So, did it work?!
Click to expand...
Click to collapse
I'm at work now. I'll try after a few hours.
Radu Florin said:
I'm at work now. I'll try after a few hours.
Click to expand...
Click to collapse
Good luck, I hope it works after all
Guys it worked. Some weird **** happened first, keyboard wasn't working on stock rom and everything was buggy but after an update with HiSuite and a factory reset everything works fine. Thank you for all your support.
Radu Florin said:
Guys it worked. Some weird **** happened first, keyboard wasn't working on stock rom and everything was buggy but after an update with HiSuite and a factory reset everything works fine. Thank you for all your support.
Click to expand...
Click to collapse
Great , your device is back :highfive:

Help me unbrick my Honor 8

Well guys, I think I did it. I think I really did brick my Honor 8.
Phone details: New Honor 8, Model is FRD-AL10.
It came with the Chinese ROM, locked. What I did was to unlock it with DC unlocker, flash TWRP as custom recovery and root it.
Later, I had some problems with installing Open Gapps so I decided that I will flash a custom ROM unto it. What I chose was this RROS. I followed all of the instructions, made sure my EMUI was up to date, deleted all of my fingerprints (although I did not disable the PIN lock). I performed a factory reset using TWRP, flashed RROS and started facing errors.
Trying to power up the phone I found out it was going into bootloop, not able to start up. Only recovery available was not TWRP, but the default Huawei eRecovery, that lets you restore the phone using the Wi-Fi to download the needed files. Panicking for my new phone, I tried to restore my phone this way, only when it completed the download it failed restoring.
I have tried to unbrick my phone using the Honor 8 Multi-Tool: flashing BOOT.img, CUST.img, Recovery, USERDATA.img and SYSTEM.img. The firmware I downloaded and extracted UPDATE.app from is this: FRD-AL10_C00B135_Firmware_China_Nonspecific_Android 6.0_EMUI 4.1_05013LBP.zip.
The Multi-Tool's log is this:
Code:
12:51:55: All images are found, everything is ready for the unbricking process.
12:52:01: Unbricking started. Your computer may freezes during the process.
12:52:01: flash boot "C:\Users\Mark\Desktop\Honor 8\Unbrick\boot.img"
12:52:03: The Boot image is flashing successfully
12:52:03: flash system "C:\Users\Mark\Desktop\Honor 8\Unbrick\system.img"
12:55:09: target reported max download size of 471859200 bytes
sending sparse 'system' 1/6 (413881 KB)...
OKAY [ 30.117s]
writing 'system' 1/6...
FAILED (remote: sparse flash write failure)
finished. total time: 30.164s
12:55:09: Error#1
12:55:09: flash cust "C:\Users\Mark\Desktop\Honor 8\Unbrick\cust.img"
12:55:28: Error! You are trying to flash the wrong image!
12:55:28: flash recovery "C:\Users\Mark\Desktop\Honor 8\Unbrick\recovery.img"
12:55:31: The Recovery image is flashing successfully
12:55:31: flash userdata "C:\Users\Mark\Desktop\Honor 8\Unbrick\userdata.img"
12:55:38: target reported max download size of 471859200 bytes
sending 'userdata' (143361 KB)...
OKAY [ 4.183s]
writing 'userdata'...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 1.275s]
finished. total time: 5.458s
12:55:38: Error#1
12:55:38: Completed
12:55:38: Something went wrong (((
As you see, SYSTEM.img cannot be written for some reason, and CUST.img is for some reason the wrong file.
I also tried to flash UPDATE.app using a microSD card and the Volume up+Volume down+Power combination, but it fails after 5%, Saying:
Code:
Software install failed!
Incompatibility with current version.
Please download the correct update package.
So either my phone is completely dead, or I am missing something here.
Can anyone help me restore my phone to normal function?
you need to find the rollback package, you had android 7 but you're trying to flash android 6

Flashed magisk patched boot image - killed phone :(

I tried to root by flashing the patched boot image as describe in https://forum.xda-developers.com/ho...agisk-root-honor-view-10-mate-10-pro-t3749280. After that, the phone went into a bootloop.
When I get to the eRecovery screen, I tried 'Download latest version and recovery.' It got to 'getting package information from server' but then stopped with 'getting package info failed.'
I then tried 'Wipe data/factory reset' and it rebooted but nothing changed.
I don't know what else to try with this phone. None of the current versions of twrp would run on it. I've never bricked a device in years of rooting.
thecdn said:
I tried to root by flashing the patched boot image as describe in https://forum.xda-developers.com/ho...gisk-root-honor-view-10-mate-10-pro-t3749280. After that, the phone went into a bootloop.
When I get to the eRecovery screen, I tried 'Download latest version and recovery.' It got to 'getting package information from server' but then stopped with 'getting package info failed.'
I then tried 'Wipe data/factory reset' and it rebooted but nothing changed.
I don't know what else to try with this phone. None of the current versions of twrp would run on it. I've never bricked a device in years of rooting.
Click to expand...
Click to collapse
You need to restore your original ramdisk. Also, you have to patch your own ramdisk.img with Magisk Manager if you want to try rooting your device.
And btw, this is a development forum, not General or Q&A one. Read carefully before trying to mod this device, or you will end up with an expensive brick.
please contact me on hangouts i may be able to help [email protected]
You can download the appropriate images to restore your device below. These are for the US variant (BKL-L04)
https://drive.google.com/open?id=1kfNAjIwiMj8wpeDuJayiH2t-srYBBvN3
Edit: Link updated
[email protected]_USA said:
You can download the appropriate images to restore your device below. These are for the US variant (BKL-L04)
https://drive.google.com/open?id=1kf...yiH2t-srYBBvN3
Click to expand...
Click to collapse
I"m getting a web page not found 404 when I try that link.
thecdn said:
I"m getting a web page not found 404 when I try that link.
Click to expand...
Click to collapse
Same
thecdn said:
I"m getting a web page not found 404 when I try that link.
Click to expand...
Click to collapse
freeza said:
Same
Click to expand...
Click to collapse
look like chris didnt updated the link,
bdw here you guys go https://drive.google.com/open?id=1kfNAjIwiMj8wpeDuJayiH2t-srYBBvN3
I flashed the system.img and the recovery_ramdisk.img. It booted to the eRecovery screen again.
I tried 'Download latest version and recovery' and it failed with the 'getting package info failed' error again.
I then tried 'Wipe data/factory reset' and unlike before, it actually went through and said it was successfully completed. But then it rebooted twice and went back to the eRecovery screen again.
Any ideas on how to proceed from here?
ETA: When I pressed vol up/power after this it went to a screen which said 'software install failed' instead of the recovery screen I thougt it would go to. After the first time, pressing vol up/power goes to the EMUI screen with the options of 'Reboot' 'Wipe data/factory reset' and 'Wipe cache partition.'
thecdn said:
I flashed the system.img and the recovery_ramdisk.img. It booted to the eRecovery screen again.
I tried 'Download latest version and recovery' and it failed with the 'getting package info failed' error again.
I then tried 'Wipe data/factory reset' and unlike before, it actually went through and said it was successfully completed. But then it rebooted twice and went back to the eRecovery screen again.
Any ideas on how to proceed from here?
ETA: When I pressed vol up/power after this it went to a screen which said 'software install failed' instead of the recovery screen I thougt it would go to. After the first time, pressing vol up/power goes to the EMUI screen with the options of 'Reboot' 'Wipe data/factory reset' and 'Wipe cache partition.'
Click to expand...
Click to collapse
You need to restore ramdisk, not recovery_ramdisk.
Pretoriano80 said:
You need to restore ramdisk, not recovery_ramdisk.
Click to expand...
Click to collapse
I did 'fastboot flash ramdisk ramdisk.img' and it still does a couple of reboots and then goes back to the EMUI screen with the recovery/reset/reboot/shutdown options.
In summary, this morning I did:
'fastboot flash system system.img' which resulted in 7 occurances of 'sending sparse system x/7 (xxxx KB)...' - which I have never seen before but all finished with OKAY
'fastboot flash recovery_ramdisk recovery_ramdisk.img'
'fastboot flash ramdisk ramdisk.img'
Is there something else I could do or redo in a particular order?
thecdn said:
I did 'fastboot flash ramdisk ramdisk.img' and it still does a couple of reboots and then goes back to the EMUI screen with the recovery/reset/reboot/shutdown options.
In summary, this morning I did:
'fastboot flash system system.img' which resulted in 7 occurances of 'sending sparse system x/7 (xxxx KB)...' - which I have never seen before but all finished with OKAY
'fastboot flash recovery_ramdisk recovery_ramdisk.img'
'fastboot flash ramdisk ramdisk.img'
Is there something else I could do or redo in a particular order?
Click to expand...
Click to collapse
Try to also flash kernel : fastboot flash kernel kernel.img
Pretoriano80 said:
Try to also flash kernel : fastboot flash kernel kernel.img
Click to expand...
Click to collapse
No joy yet but I do appreciate all the help.
thecdn said:
No joy yet but I do appreciate all the help.
Click to expand...
Click to collapse
Did you tried a factory reset from stock recovery?
Pretoriano80 said:
Did you tried a factory reset from stock recovery?
Click to expand...
Click to collapse
I've tried two factory resets after completing the above mentioned actions. Both times reported they were successful it still won't boot to the os, goes to the EMUI screen after several boot attempts.
Same problem here on a US BKL-L04 =(
I flashed a magisk modified ramdisk.img and have been in bootloop ever since.
I've downloaded and flashed recovery_ramdisk.img, ramdisk.img, and kernel.img from the link earlier in this thread: https://drive.google.com/drive/folders/1kfNAjIwiMj8wpeDuJayiH2t-srYBBvN3
I've then did "Wipe data/factory reset" from Huawei eRecovery - no luck
$ fastboot flash ramdisk ramdisk.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (16384 KB)...
OKAY [ 0.401s]
writing 'ramdisk'...
OKAY [ 0.083s]
finished. total time: 0.484s
$ fastboot flash recovery_ramdisk recovery_ramdisk.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (32768 KB)...
OKAY [ 0.807s]
writing 'recovery_ramdisk'...
OKAY [ 0.164s]
finished. total time: 0.971s
sek stock2 $ fastboot flash kernel kernel.img
target reported max download size of 471859200 bytes
sending 'kernel' (24576 KB)...
OKAY [ 0.615s]
writing 'kernel'...
OKAY [ 0.128s]
finished. total time: 0.745s
Aside from fastboot happing very quickly (< 1 second even for 32 meg recovery_ramdisk.img) everything seems to work fine... The phone just no longer boots - it trys a few times - displaying the "Your device has been unlocked and can't be trusted" screen for quite a while and the non-animated blue honor screen briefly and then ends up in EMUI eRecovery.
Are these files still up to date? Or perhaps there were newer versions on my phone and that's why flashing the older ones isn't working?
Also worth noting, I'm flashing from a mac with Android sdk fastbook:
$ fastboot --version
fastboot version 0.0.1-4500957
Installed as /Users/sek/Library/Android/sdk/platform-tools/fastboot
Thanks for any help / tips!
akasek said:
I flashed a magisk modified ramdisk.img and have been in bootloop ever since.
I've downloaded and flashed recovery_ramdisk.img, ramdisk.img, and kernel.img from the link earlier in this thread: https://drive.google.com/drive/folders/1kfNAjIwiMj8wpeDuJayiH2t-srYBBvN3
I've then did "Wipe data/factory reset" from Huawei eRecovery - no luck
$ fastboot flash ramdisk ramdisk.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (16384 KB)...
OKAY [ 0.401s]
writing 'ramdisk'...
OKAY [ 0.083s]
finished. total time: 0.484s
$ fastboot flash recovery_ramdisk recovery_ramdisk.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (32768 KB)...
OKAY [ 0.807s]
writing 'recovery_ramdisk'...
OKAY [ 0.164s]
finished. total time: 0.971s
sek stock2 $ fastboot flash kernel kernel.img
target reported max download size of 471859200 bytes
sending 'kernel' (24576 KB)...
OKAY [ 0.615s]
writing 'kernel'...
OKAY [ 0.128s]
finished. total time: 0.745s
Aside from fastboot happing very quickly (< 1 second even for 32 meg recovery_ramdisk.img) everything seems to work fine... The phone just no longer boots - it trys a few times - displaying the "Your device has been unlocked and can't be trusted" screen for quite a while and the non-animated blue honor screen briefly and then ends up in EMUI eRecovery.
Are these files still up to date? Or perhaps there were newer versions on my phone and that's why flashing the older ones isn't working?
Also worth noting, I'm flashing from a mac with Android sdk fastbook:
$ fastboot --version
fastboot version 0.0.1-4500957
Installed as /Users/sek/Library/Android/sdk/platform-tools/fastboot
Thanks for any help / tips!
Click to expand...
Click to collapse
Flash stock kernel, ramdisk and recovery ramdisk for your model in fastboot and you'll be able to boot again
Rommco05 said:
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Use this tool for flash full fw
Click to expand...
Click to collapse
Thanks for the info, that tool looks interesting. Where can I get the stock files for BKL-L04 US version Honor View 10?
I have now tried flashing kernel, ramdisk, recovery_ramdisk and system from both of these sources:
- https://drive.google.com/drive/folders/1kfNAjIwiMj8wpeDuJayiH2t-srYBBvN3
- http://arter97.com/browse/v10/stock/BKL-L04/
They all appear to flash fine. I tried flashing vendor.img as well, but get an error on that:
$ fastboot flash vendor vendor.img
target reported max download size of 471859200 bytes
Invalid sparse file format at header magic
sending sparse 'vendor' 1/2 (445713 KB)...
OKAY [ 9.718s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
finished. total time: 9.724s
It still doesn't want to boot. I end up in eRecovery each time.
I am able to flash TWRP from Pretoriano80: https://forum.xda-developers.com/honor-view-10/development/recovery-twrp-3-2-1-0-t3769917
It seems to be working properly, perhaps that helps me somehow?
Finally back up and running - Thanks Tecalote!
FYI: I am finally back up and running - Tecalote's post worked perfectly (and BKL-L04 update zips are linked earlier in the thread also): https://forum.xda-developers.com/showpost.php?p=76331841&postcount=46
akasek said:
Thanks for the info, that tool looks interesting. Where can I get the stock files for BKL-L04 US version Honor View 10?
I have now tried flashing kernel, ramdisk, recovery_ramdisk and system from both of these sources:
- https://drive.google.com/drive/folders/1kfNAjIwiMj8wpeDuJayiH2t-srYBBvN3
- http://arter97.com/browse/v10/stock/BKL-L04/
They all appear to flash fine. I tried flashing vendor.img as well, but get an error on that:
$ fastboot flash vendor vendor.img
target reported max download size of 471859200 bytes
Invalid sparse file format at header magic
sending sparse 'vendor' 1/2 (445713 KB)...
OKAY [ 9.718s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
finished. total time: 9.724s
It still doesn't want to boot. I end up in eRecovery each time.
I am able to flash TWRP from Pretoriano80: https://forum.xda-developers.com/honor-view-10/development/recovery-twrp-3-2-1-0-t3769917
It seems to be working properly, perhaps that helps me somehow?
Click to expand...
Click to collapse
akasek said:
Thanks for the info, that tool looks interesting. Where can I get the stock files for BKL-L04 US version Honor View 10?
I have now tried flashing kernel, ramdisk, recovery_ramdisk and system from both of these sources:
- https://drive.google.com/drive/folders/1kfNAjIwiMj8wpeDuJayiH2t-srYBBvN3
- http://arter97.com/browse/v10/stock/BKL-L04/
They all appear to flash fine. I tried flashing vendor.img as well, but get an error on that:
$ fastboot flash vendor vendor.img
target reported max download size of 471859200 bytes
Invalid sparse file format at header magic
sending sparse 'vendor' 1/2 (445713 KB)...
OKAY [ 9.718s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
finished. total time: 9.724s
It still doesn't want to boot. I end up in eRecovery each time.
I am able to flash TWRP from Pretoriano80: https://forum.xda-developers.com/honor-view-10/development/recovery-twrp-3-2-1-0-t3769917
It seems to be working properly, perhaps that helps me somehow?
Click to expand...
Click to collapse
try to install twrp and then do hruupdate from twrp
get your files from firmware finder and search xda forums to how to install those files
its very easy and your system will be back in stock format
after that you can try to root and install custom rom
thecdn said:
No joy yet but I do appreciate all the help.
Click to expand...
Click to collapse
Hi, what helped you there? I have a similar situation.
"Hi,
I need some advice on what can be done with my Honor View10 as it keeps gracing a bootloop followed by fasrboot mode.
Mine is a C675 variant and I was on 190 when I decided to unroot and update the device to 218. Once that was done, I flashed a patched recovery_ramdisk boot image that was patched using magisk to support it. Worked fine. Did a reboot and it got stuck in a bootloop.
I have tried flashing other patch.imgs too, due instance tried extracting recovery.img of the current version of rom, flashed it, no luck!
Tried flashing the patched version of that, still did not help.
I am on EMUI9, any help please?
Also can anyone help me with the link of one of the latest versions of C675 update please? "
This is what happened to me

Can't get into recovery mode

Hi.
After trying to upgrade my rooted P20 eml-l09 c605 with EMUI 9.x, I couln't get into recovery mode anymore (on button + vol up)
What I did was flash original ramdis.img and recovery_ramdis.img to unroot it, so i could upgrade it directly from the phone, but something bad happened so I couldn't get the recovey menu anymore.
Help please.
PS: (Bootloader is unlocked)
This message appears when I try to flash recovery_ramdisk
- Flashing TWRP recovery
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (23542 KB)...
OKAY [ 0.577s]
writing 'recovery_ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.590s
Where did you find the original ramdisk image from?
I need it too because i accidently flashed a TWRP version that doesent work
I can't flash anything, even with the original ramdisk (downloaded from firmware finder).
I really don't know what to do.
My phone is an EML-L09C605, it is working and rooted.
Only I can get to fastboot menu.
I still haven't got a solution but, Is downgrading it the way to follow?
Help please.

Categories

Resources