[ROM][UNOFFICIAL] LineageOS 17.1 Samsung S4 GT-I9515[microg ready] - Galaxy S 4 General

LineageOS 17.1 for Samsung S4 VALUE EDITION (GT-I9515) (jfvelte)
is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device. All the source code for LineageOS is available in the LineageOS Github repo. If you would like to contribute to LineageOS, please visit our Gerrit Code Review.
​
Code:
* [B][U]Your warranty is now void.[/U][/B]
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
What all works
Boot
RIL (Calls, SMS, Data)
Camera
Video
Audio
Flash
Led
GPS
Sensors
Rotation
Wifi
USB
Bluetooth
What doesn't work
Possibly other things that aren't listed.
Creates a full backup of the system
Installation Clean :
Before you begin, save
Remove the PIN protection and then restart for TWRP recovery.
Erase data under Advanced (do not format data - this will erase the internal memory)
Delete system and cache under Advanced
Flash ROM + Gapps or nanodroid
Optional - Flash supported root
Restart
!!! OTA-update is like in all my Roms set up !!!
Updates can be downloaded and installed via lineageos_updates on your mobile phone.
if it should not be possible to install the update automatically or you want to install it manually, proceed as follows,
(Selects in twrp) install/selects memory/internal memory/parent folder/data/lineageos_updates.
chooses the build and installs it and everything else you want to install and restarts after that.
Download Rom
https://www.los-legacy.de/17.1/jfvelte
Download Root
- Magisk-v20.xx.zip
Download Gapps
For users using gapps installed 10.0 arm pico or nano
Gapps
Download MicroG
For MicroG users
GitHub - nift4/microg_installer_revived: Install microG GmsCore, GsfProxy, FakeStore (or Play Store if you want so) and MapsV1 to /system/
Install microG GmsCore, GsfProxy, FakeStore (or Play Store if you want so) and MapsV1 to /system/ - GitHub - nift4/microg_installer_revived: Install microG GmsCore, GsfProxy, FakeStore (or Play Sto...
github.com
[MODULE/SYSTEM] NanoDroid 21.0/22.0-beta2 (microG, pseudo-debloat, F-Droid + apps)
Reporting Bugs :
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
Credits
- arco68, npjohnson, and every open source developer and user who contributes directly or indirectly to the LineageOS community in the development of and in providing feedback for jfvelte.
support for german user
LINEAGEOS 17.1 Signature Spoofing SAMSUNG S4 (I9515) - Los-Legacy
LineageOS 17.1 for Samsung S4 VALUE EDITION (GT-I9515) (jfvelte) Was alles funktioniert RIL (Anrufe, SMS, Daten) Audio Led Sensoren Rotation Wifi Bluetooth Audio USB OTA Update Selinux Enforcing GPS Was nicht funktioniert schreibt es mir Erstellt ein…
forum.los-legacy.de
XDA:DevDB Information
[ROM]UNOFFICIAL[Samsung S4 GT-I9515[microg ready] LINEAGEOS 16.0/17.1, ROM for the Samsung Galaxy S4
Contributors
Exodusnick
Source Code: https://github.com/LineageOS
Kernel
GitHub - LineageOS/android_kernel_samsung_jf at lineage-17.1
Contribute to LineageOS/android_kernel_samsung_jf development by creating an account on GitHub.
github.com
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2019-06-06
Last Updated 2023-03

Reserved

Reserved

Reserved

Amazing! It just works faster than previous build. Just needed to update MicroG through Nanomod and it works perfectly!

QGM said:
Amazing! It just works faster than previous build. Just needed to update MicroG through Nanomod and it works perfectly!
Click to expand...
Click to collapse
which version and file from Nanomad did you flash?
---------- Post added at 02:08 PM ---------- Previous post was at 02:05 PM ----------
@Exodusnick
many thx for your work

@klaus-hamburg
I don't know why he updated on Nanomod, everything works perfectly for me, including my app purchases.

Exodusnick said:
@klaus-hamburg
I don't know why he updated on Nanomod, everything works perfectly for me, including my app purchases.
Click to expand...
Click to collapse
I noticed this just now
first ROM start after a few seconds on my phone
BT woks for me :good:

Sorry currently not.

Exodusnick said:
Sorry currently not.
Click to expand...
Click to collapse
second test BT works, so all is perfect
thx so much
:good::good::good::good:

For calling ?
BT for calls does not work, but for music.

Exodusnick said:
For calling ?
Click to expand...
Click to collapse
only music, but it is absolutely sufficient

Exodusnick said:
@klaus-hamburg
I don't know why he updated on Nanomod, everything works perfectly for me, including my app purchases.
Click to expand...
Click to collapse
Because Youtube wasn't working properly for me, and I couldn't choose any account.

deleted

Thread closed by OP request.

Thread opened by OP request @Exodusnick

Going to try it soon ?

I got error 7 while installing on my device what do i do?

You have to instala gapps??

Ragnarokay said:
I got error 7 while installing on my device what do i do?
Click to expand...
Click to collapse
probably just update TWRP to a newer version. take the latest version from twrp.me

Related

[5.0.x] [SM-T525] CyanogenMod 12.0 UNOFFICIAL Nightlies for the Tab Pro 10.1 LTE

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 12.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Download Links
CyanogenMod: download.crpalmer.org
Google apps addon:
Download: http://d-h.st/users/dhacker29/?fld_id=27426 (use latest lp gapps)
XDA:DevDB Information
CyanogenMod 12.0 for PicassoLTE (Unofficial), ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Testing
Created 2015-03-03
Last Updated 2015-03-02
Reserved
You, Sir, are amazing!
Installed the 20150304 nightly and the stock gapps package from here about an hour ago. So far no problems with any of my standard applications (restored from Titanium backups).
Thank you for Lollipop. I did the same as M0lle (thanks for the gapps links ), and everything looks great but there is just one thing that I've noticed. On my device it seems that the widgets are not added automatically. I had to restart the tablet a few times when I installed new widgets to populate the widget window. Could it be just that I forgot something along the process? Is somebody else experiencing the same issue? Cheers
Edit: deleted cache and everything is fine now. Thanks.
Everything works just fine except video streaming.
No problems in YouTube app, but in all other apps (also in chrome). After a few minutes of video streaming the picture stops and the sound is still playing. Happens every time.
Apps i tried which have the problem: MX Player Pro, South Park App, Chrome (NowVideo, Ecostream, MovShare, Vivo)
Update 20.03.2015
First off all thanks for that awsome rom port much respect!
Its all fine under update 19.03.2015 but update 20.03.2015 i get error wen i click on settings.
settings dont open and i get an forced closed!
Great work thanks man
Were can i find the changelog for the updates?
Rebel Digga said:
Were can i find the changelog for the updates?
Click to expand...
Click to collapse
http://download.crpalmer.org/nightlies/changelog-device_samsung_picassolte.txt
ok thanks, but the 28.03 update is 4.4.4 kitkat ! what is wrong?
---------- Post added at 09:47 PM ---------- Previous post was at 09:40 PM ----------
Okay thanks
Nice April Fools joke in the "Android is upgrading" box with the 20150401 nightly. :laugh:
Working great !
2 questions :
* Is it possible to implement an shortcut in the task bar a widget to change the sound from ring to vibrate to silence to ring like in 4.4
* Is it possible to have the "old" exchanged mail account because I dont like it included in Gmail
Thank you very much for your great work !!!
HiQ123 said:
Everything works just fine except video streaming.
No problems in YouTube app, but in all other apps (also in chrome). After a few minutes of video streaming the picture stops and the sound is still playing. Happens every time.
Apps i tried which have the problem: MX Player Pro, South Park App, Chrome (NowVideo, Ecostream, MovShare, Vivo)
Click to expand...
Click to collapse
Please crpalmer fix the video streaming problem
Hi, crpalmer! Thanks for CyanogenMod for 525th. At your source download.crpalmer.org has Cyan 12.1, but it's links and thread I don't see. I installed on my Tab - not without bugs, but works well. In this thread to discuss 12.1?
HiQ123 said:
Please crpalmer fix the video streaming problem
Click to expand...
Click to collapse
No sense what you write here. If he does not answer private messages)
In the next build, check, can correct these fixes cm12.1
http://review.cyanogenmod.org/#/c/93928/
http://review.cyanogenmod.org/#/c/94078/
http://review.cyanogenmod.org/#/c/94077/
http://review.cyanogenmod.org/#/c/94076/
http://review.cyanogenmod.org/#/c/93933/
http://review.cyanogenmod.org/#/c/93932/
http://review.cyanogenmod.org/#/c/93931/
http://review.cyanogenmod.org/#/c/93930/
http://review.cyanogenmod.org/#/c/93929/
Hi, it's working really great. Thanks a lot for the good work.
The only difference I see is the battery life. But I guess it has to be expected. Do you know if there is a way to improve the battery life on this ROM.
Thanks
@crpalmer, are these nightlies going to be updated or are you not supporting this devices anymore.
Thanks.
joeb690 said:
@crpalmer, are these nightlies going to be updated or are you not supporting this devices anymore.
Thanks.
Click to expand...
Click to collapse
CM-12.0 is basically EOL as far as I am concerned. You should really switch to CM-12.1 which is better at that point.
I am definitely still suporting cm-12.1 on picassolte.
crpalmer said:
CM-12.0 is basically EOL as far as I am concerned. You should really switch to CM-12.1 which is better at that point.
I am definitely still suporting cm-12.1 on picassolte.
Click to expand...
Click to collapse
Thanks, I assume you are referring to this thread?
http://forum.xda-developers.com/gal...nt/5-1-x-cyanogenmod-12-1-unofficial-t3085999
joeb690 said:
Thanks, I assume you are referring to this thread?
http://forum.xda-developers.com/gal...nt/5-1-x-cyanogenmod-12-1-unofficial-t3085999
Click to expand...
Click to collapse
Yes,

[ROM][TREBLE][07/08/2020][9.X] Haky86's LineageOS 16.0 Huawei P8 Lite 2017 PRA-LX1

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Requirements:
Honor 9 Lite TWRP.
Unlocked Bootloader.
Working:
Audio.
Bluetooth.
Camera.
Display.
Graphics.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi.
Bugs:
TELL ME
I'm not responsible of your bootloop if you did not follow steps.
Installaion Guide:
Download latest build.
Reboot to TWRP and flash it like AEX.
Reboot, enjoy the rom.
Downloads:
17-12-2018:
lineage-16.0-20181217-UNOFFICIAL-hi6250.zip| 543.5 MB
initial build.
18/12/2018.
lineage-16.0-20181217-UNOFFICIAL-hi6250.zip
Upload same build on AndroidFileHost.
Add Telegram support group.
15/07/2019.
lineage-16.0-20190715-Haky86-prague.zip
Bring up iConnect from PRA-LX1C432B360 a component used for wearable devices.
Android 9.0.0 R44
Security Patches: July 2019
20/07/2019.
lineage-16.0-20190719-Haky86-prague.zip
Bring up iConnect from PRA-LX1C432B360 a component used for wearable devices.
Android 9.0.0 R44
Possible fix for BLE (please test and report) thanks to @hackintosh5
22/07/2020.
lineage-16.0-20200722-UNOFFICIAL-hi6250.zip
SPL: July 2020
Bugs: gapps and webview, report me if you get 'em work.
Gapps:
I recommend SimpleGapps.
Recommendation:
Once boot may got some warning messages about media, download this RECOVERY_RAMDISK.
Reboot to TWRP.
Flash it as Recovery Ramdisk and run factory reset and all those annoying errors will gone.
Kernel GPL:
I'm not violating any kind of license since my ROMs used the stock kernel come with Emui 8.x called kernel.img so all credits goes to Huawei.
Notes:
To fix distorting audio while playing media: open AudioFX and disable it.
Some features might result missed that's depend on LineageOS developments.
XDA:DevDB Information
LineageOS P8 Lite 2017, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, flex1911
Source Code: http://github.com/hak86
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2018-12-18
Beta Release Date: 2018-12-17
Created 2018-12-18
Last Updated 2018-12-17
** Reserved **
click on "screenshots" tab to see screens.
I can swear I cleaned thoroughly... does this ship with magisk?
Edit: the Magisk Manager app was installed when I flashed. I thought I wiped everything though.
Waited for this rom for a long time. Thanks
Great rom, thanks a lot btw great battery backup as well :laugh: :good: , just one issue.. Can't access google assistant
tejask2610 said:
Great rom, thanks a lot btw great battery backup as well :laugh: :good: , just one issue.. Can't access google assistant
Click to expand...
Click to collapse
Try give permissions in Settings > Apps.
Is Pie Controls (Swipe up etc) crashing one of the issues caused by Lineage? I read something about it days ago, but maybe it could be fixed now, are them working?
Nico2416 said:
Is Pie Controls (Swipe up etc) crashing one of the issues caused by Lineage? I read something about it days ago, but maybe it could be fixed now, are them working?
Click to expand...
Click to collapse
Mostly depend on their developments, isn't official even on my LePro3. we have to wait a bit.
haky 86 said:
Try give permissions in Settings > Apps.
Click to expand...
Click to collapse
Google application already has all the permissions.. Still the same issue..
haky 86 said:
Mostly depend on their developments, isn't official even on my LePro3. we have to wait a bit.
Click to expand...
Click to collapse
Definitely trying it out nonetheless as soon as I can. Thanks again for your work
tejask2610 said:
Google application already has all the permissions.. Still the same issue..
Click to expand...
Click to collapse
I'll checkout the issue in next build. or we should wait next releases of LineageOS since still in developments. ))
haky 86 said:
I'll checkout the issue in next build. or we should wait next releases of LineageOS since still in developments. ))
Click to expand...
Click to collapse
:good:
cookremier said:
Have tested LA16 out, but its way too "naked" for me in direct compare to AOSPE6.1 or any other rom
Also the homescreen was crashing in a neverending loop, so i had to restart the phone.
When it booted up, crashing started again at the homescreen.
I thoght of installing it again, but when i cannot even set the qr bar to show up more than 3 tiles per row, why should i do.
As a groundbase LA16 maybe good, but i need customizations and in that point, its really not my taste.
But thanks for building it, maybe i will test again sometime.
Click to expand...
Click to collapse
1-) this rom still in developments like RROS.
2-) try factory reset with stock recovery should work better
NICE. Just got started with installing roms on this device, and was looking for a Pie los build to try.
Will see if I can test this one out this week, and report any bugs if I can. :good:
excellent work for devices with hi6250
a problem the battery in stand mode is drained too much.
And another error is that when you connect the headphones and disconnect you run out of audio.
GhostMX said:
excellent work for devices with hi6250
a problem the battery in stand mode is drained too much.
And another error is that when you connect the headphones and disconnect you run out of audio.
Click to expand...
Click to collapse
I will fix them in next build
Idk if its an issue with my phone, but I see the screen blinking on low brightness
hi
i have a problem with Bluetooth it keeps crashing when i connect my miband to it
mahdi.h22 said:
hi
i have a problem with Bluetooth it keeps crashing when i connect my miband to it
Click to expand...
Click to collapse
it kinda fixed itself
can u recommend a magisk that i can flash?
:angel:
mahdi.h22 said:
it kinda fixed itself
can u recommend a magisk that i can flash?
:angel:
Click to expand...
Click to collapse
V18?

[ROM][UNOFFICIAL] CyanogenMod 12.1 [20210102]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the LineageOS Github Repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Device-specific source code:
Device tree: https://github.com/surblazer/android_device_samsung_galaxys2plus-common-5.1/tree/cm-12.1 and https://github.com/surblazer/android_device_samsung_i9105p-5.1/tree/cm-12.1
Kernel source: https://github.com/surblazer/android_kernel_samsung_galaxys2plus-common-5.1
Compatibility Patches: https://github.com/andixlm/build_tools/tree/cm-12.1/patches
Downloads:
ROM for I9105P: https://androidfilehost.com/?fid=17248734326145707709
ROM for I9105: https://androidfilehost.com/?fid=17248734326145707745
Gapps: http://opengapps.org
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera
Video (playback & recording)
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Known Issues:
There are no major hardware issues
Installation Instructions:
Make a backup!
If you were on CM 10.1 or a stock ROM prior to 4.2, upgrade to stock 4.2 first.
Install ClockworkMod or TWRP recovery with SELinux support. Older CWM will result in a "status 7" error.
Download the ROM and GApps
Reboot to recovery
Wipe data/factory reset if coming from stock or another non-CM ROM (You may get a "staus 7" error if you fail to wipe.)
Flash the ROM for your device and then GApps
Reboot your phone
Enjoy!
Credits:
CyanogenMod team
@pawitp - for patches
@xenon92, @LuK1337, @CoolDevelopment and other I9105/P and I9082 devs
@andixlm for sources and optimizations
Don't work
You cant install system without turning off wirelles or mobile data.
Problem is on google store.
On pico and nano gaaps its same problem.
You cant sign in and thats it.
If you want to open browser...its says "Unfortunately,Browser has stopped.
dejjan92 said:
You cant install system without turning off wirelles or mobile data.
Problem is on google store.
On pico and nano gaaps its same problem.
You cant sign in and thats it.
If you want to open browser...its says "Unfortunately,Browser has stopped.
Click to expand...
Click to collapse
I know about this webview issue. I fix it after finishing job on LOS 15.1 (Oreo). Also you can try: install without gapps->disable preinstalled android webview->install Android WebView from google->Install Gapps
dejjan92 said:
You cant install system without turning off wirelles or mobile data.
Problem is on google store.
On pico and nano gaaps its same problem.
You cant sign in and thats it.
If you want to open browser...its says "Unfortunately,Browser has stopped.
Click to expand...
Click to collapse
Hello! I updated the ROM, link in post
Did anyone tried this updated version?
dejjan92 said:
Did anyone tried this updated version?
Click to expand...
Click to collapse
I use it daily
Updated:
-Bring back Ambient Display
-libandroidfw fixed
Version for I9105 added!
Installed without any errors. Works great!!!
ROM updated with the last security patch, rebased on this
Thanks man for reviving the beast . Works perfect
Aongkon said:
Thanks man for reviving the beast . Works perfect
Click to expand...
Click to collapse
hello what open gapps did you download?
I am on 4.1.2 stock?? will it not work for me??
4.2.2 is not available for my country. is there any way?
thank you .
zbiplop said:
I am on 4.1.2 stock?? will it not work for me??
4.2.2 is not available for my country. is there any way?
thank you .
Click to expand...
Click to collapse
Hello, did you have any success with 4.1.2?
Khanivore said:
Hello, did you have any success with 4.1.2?
Click to expand...
Click to collapse
nope. I tried the miui rom now my phone's usb not recognised in odin download mode. can I pm you?
Khanivore said:
Hello, did you have any success with 4.1.2?
Click to expand...
Click to collapse
yes, it's working for me. I flashed stock 4.2.2 using odin 3.09 . Now I am on this rom but it seems slower than stock 4.2.2 . IMO stock 4.2.2 is best for this device.

[ROM][UNOFFICIAL][13][ I9305 ][ LineageOS 20.0 ][ALPHA]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version of LineageOS 20 for our Samsung Galaxy S3 (I9305).
This is a alpha build, also from the LineageOS side, there are typical functions still missing, so don't install it if you want a completely stable and completed ROM and don't report my already listet bugs!
Attention:
Sometimes it needs another reboot to find the sim card.
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB
RIL
OTA-Updates
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
Random reboots
NFC
SD-Card can't be formatted as internal storage, this will cause a bootloop
Spoiler: Links
TWRP
ROM direct link
I9305 ROM
ROM Mega
Spoiler: Changelog
26.01.2023
13.03.2023
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /vendor/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
I would recommend to use microG instead of BitGapps,
here you can find the installation instructions:
Spoiler: microG instructions
Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
Open Magisk and update the App (and do a reboot if it's asking)
Enable Zygisk in Magisk
Download and install microG installer in the Magisk manager, reboot
Download and install safetynet-fix in the Magisk manager, reboot
Check with a safetynet checker app and you should pass
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access all boeffla configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][13.x][I9305][ALPHA] LineageOS 20.0, ROM for the Samsung Galaxy S3 LTE
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 13.x T
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Version Information
Status: Alpha
Created 2022-11-08
Last Updated 2023-03-13
Does the tmobile s3 need a different rom? I'm upgrading all my old phones I just found. You happen to be working on all the phones I have.
kerryking1 said:
Does the tmobile s3 need a different rom? I'm upgrading all my old phones I just found. You happen to be working on all the phones I have.
Click to expand...
Click to collapse
I'm sorry to tell you that the T-Mobile S3 has a different chipset (Qualcomm Snapdragon S4 Plus MSM8960) so this is not compatible.
This device never reached a higher android version than 7, I would love to bring Android 13 to this device, but I don't own this model.
html6405 said:
I'm sorry to tell you that the T-Mobile S3 has a different chipset (Qualcomm Snapdragon S4 Plus MSM8960) so this is not compatible.
This device never reached a higher android version than 7, I would love to bring Android 13 to this device, but I don't own this model.
Click to expand...
Click to collapse
Are you in the US?
kerryking1 said:
Are you in the US?
Click to expand...
Click to collapse
No, I'm in Europe...
Would it be possible to port if I tested it?
kerryking1 said:
Would it be possible to port if I tested it?
Click to expand...
Click to collapse
Not really, this would slow down the process too much.
Hi there. I stumbled over this thread? Are compiled versions of the Rom available? Just for testing a nonrooted device? Cheers
rattesack3 said:
Hi there. I stumbled over this thread? Are compiled versions of the Rom available? Just for testing a nonrooted device? Cheers
Click to expand...
Click to collapse
1.03 GB folder on MEGA
2 files
mega.nz
Thanks will give it a try soon! Everytime i thought there were device at eol, they last longer. Hopefully this isn' t true for the gt-i9305.
Can you give some instructions to build the Rom on my own?
Do you think I could just swap boards? The boards look the same.
rattesack3 said:
Can you give some instructions to build the Rom on my own?
Click to expand...
Click to collapse
Write me a PN and I will help you.
kerryking1 said:
Do you think I could just swap boards? The boards look the same.
Click to expand...
Click to collapse
I fear that the mainboard could not fit into the case, but idk, you could give it a try.
I asked a seller on ebay and they said it doesn't work.
Is porting to a different chipset like starting over on port?
kerryking1 said:
Is porting to a different chipset like starting over on port?
Click to expand...
Click to collapse
I would have to start from the last developement state.
But at first I would make the device tree's for A13 ready, fix the build (there could be many problems), make the kernel ready and so on...
There would be a lot of work todo.
Hello,
the volume of voice recordings (e.g. whatsapp or signal) has always been too low for me in Lineage OS. In order for my interlocutors to understand me properly, I always had to increase the volume by changing the mixer_paths.xml in /root/vendor/etc/. Here is the video:
Unfortunately this file does not exist in Lineage OS 20. Does anyone know how to increase the volume of voice recordings here?
I'm so grateful you have brought my N8000 and i9305 back to life!
My children are learning and playing on my N8000 tablet. I have donated for N8000.
I re-wiped and installed your latest on i9305
20.0-20221108-HTML6405-i9305.zip
MicroG
Disabled animations
Android UI is running fast!
I tested YouTube app. It works but drops some frames on 360p, and any higher quality levels it drops a lot of frames.
scrcpy working nicely (not used with YouTube of course)
I'm still testing etc. It looks like i9305 will be useful with your ROM
-------------
Regarding your 3.4 kernel for "S3" (probably i9300?)
@html6405
Downloads for : Samsung Galaxy S3 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Please excuse my ignorance about kernels on Samsung Android.
Kernel Q1. Can your 3.4 "S3" Kernel work on S3 LTE i9305?
No Q2: Would you be able to compile 3.4 kernel for i9305?
Yes Q2. If I install html6405_kernel_-e48ea6b54b22-m0-3.4.zip Must I also install boot_img_3.4.img
Yes Q3. In what order do I install the kernel zip and boot_img zip?
Update 26.01.2023:
Synced with latest LineageOS sources
Set swappiness back to 100
Fixed SamsungDoze
Update 13.03.2023:
Synced with LineageOS sources from February
Moved to faster ota server
Possible fix for gralloc crash

[ROM] [stable] [5.1.1] MRom 2.0 for J100h

I'm not responsible for any demage that this rom did!
MRom v2.0
The goal of this rom is to put as much apps as posible (so you don't have to install gapps and... slow down your device)
(This rom will be developed only for older phones(becuse if you install gapps i will just lag as hell)
Special thanks to:
@notnoelchannel for main rom (5.1.1) https://github.com/NotNoelChannel/android_kernel_samsung_j13g/
old version Kostareka for the main rom! (https://forum.xda-developers.com/t/...nmod-11-microg-for-samsung-galaxy-j1.4284891/) (the rom is modification for cm 11 by Kostareka!)
CM developers
And google (for android)
Any apps dev who's app is in this rom!
Working and not
Working:
WiFi
RIL (Data, Calls, SMS)
GPS
MTP
ADB
Sensors (Screen rotating, etc)
Camera
Internal/External storage
Audio (playback, recording)
Tethering (WiFi, USB, see not working)
Voice Recording
Video (playback, recording)
Everything that's not listed in "Not working"
Not working:
FM radio (removed from the firmware, will implement it soon)
Bluetooth (tethering, connecting to devices, etc)
Offline Charging (boot your phone to twrp and charge (while connecting the cable) or grab an usb cable cut it in half and + to + and - to - on battery and cable )
(taken from @notnoelchannel post)
Kernel Source code
http://[URL]https://github.com/NotNoelChannel/android_kernel_samsung_j13g/[/URL]
Contributors
ROM OS Version: 5.1.1 Lolipop Funfact I was eating a lolipop while i was updating this rom to lolipop
ROM Kernel: idk
Version Information
Status: Stable
Created: 10.06.2023
Last Updated: 11.06.2023
Note:
Pls dont hate me for my english Im dumb and this is my 1st rom that i made myself! (2nd version of it (4.4.4->5.1.1)
Features:
Pou
Greenify
F-Droid
NewPipe
Root explorer (you must root)
custom wallpaper
more will come!
Wanna add apps?
contact me: on email [email protected]
via xda
or in this post in message add app name or apk file (Infected files will be reported!)
Note: old versions are still here
if phone back screens when first (and sometimes in normal) boot this is normal i will try to fix it
Nice work brother, as I see you are new in ROM developing.
Let me give you some advice:
- Use CM12.1 as a base ROM because 4.4.4 is getting discontinued (you can use mine, it has bugs but can use as a daily)
- Install Greenify, this'll save a lot of battery
- Install open-sourced apps as an alternatives for closed-source apps.
For example: Youtube's alternative is NewPipe/SkyTube Legacy
F-Droid is an alternative for Google Play
Also, I'm planning to make a custom kernel for the J1. Can you be a tester if I can ask you?
i want to delete that reply
-
notnoelchannel said:
Nice work brother, as I see you are new in ROM developing.
Let me give you some advice:
- Use CM12.1 as a base ROM because 4.4.4 is getting discontinued (you can use mine, it has bugs but can use as a daily)
- Install Greenify, this'll save a lot of battery
- Install open-sourced apps as an alternatives for closed-source apps.
For example: Youtube's alternative is NewPipe/SkyTube Legacy
F-Droid is an alternative for Google Play
Also, I'm planning to make a custom kernel for the J1. Can you be a tester if I can ask you?
Click to expand...
Click to collapse
I can be a tester But idk if i do the rom on android 5 do I have to do a new thread
Mihot7Forever said:
I can be a tester
Click to expand...
Click to collapse
Thanks!
Mihot7Forever said:
But idk if i do the rom on android 5 do I have to do a new thread
Click to expand...
Click to collapse
No, just edit the thread's name to [ROM] [STABLE] [5.1.1] MRom 1.2 for J100H and release the android 5 build. That's it
notnoelchannel said:
Nah, you'll not have to do a new thread. Just rename the whole thing.
Are you new to this btw? Do you know how to edit threads?
Click to expand...
Click to collapse
Yea I'm green (I'm from Poland) (I'm grean= Jestem w tym zielony= I'm new at it) idk how in english it is. can you post a link to your rom?
Mihot7Forever said:
Yea I'm green (I'm from Poland) (I'm grean= Jestem w tym zielony= I'm new at it) idk how in english it is. can you post a link to your rom?
Click to expand...
Click to collapse
[ROM][STABLE][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy J1
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device. #include /* * Your warranty is now void. * * I...
forum.xda-developers.com
here you go
Thanks I'm getting back to work I will add those apps you mentioned chceck up in an hour it will be probabli soon
notnoelchannel said:
[ROM][STABLE][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy J1
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device. #include /* * Your warranty is now void. * * I...
forum.xda-developers.com
here you go
Click to expand...
Click to collapse
Can you help me? how do i set default wallpaper?
Mihot7Forever said:
Can you help me? how do i set default wallpaper?
Click to expand...
Click to collapse
You can't set default wallpaper unless you modify apk's which can lead to many errors
notnoelchannel said:
You can't set default wallpaper unless you modify apk's which can lead to many errors
Click to expand...
Click to collapse
Ok in the version 1.2 i modified apk cmwallpapers but the user MUST set this wallpaper manually
Now im testing the rom on my j100h
Changelog:
Upgraded to Lolipop (5.1.1) Thanks @notnoelchannel
added Greenify
added F-Droid
added NewPipe
also thanks to @notnoelchannel
Mihot7Forever said:
Changelog:
Upgraded to Lolipop (5.1.1) Thanks @notnoelchannel
added Greenify
added F-Droid
added NewPipe
also thanks to @notnoelchannel
Click to expand...
Click to collapse
By the way can you contact me on Discord?
notnoelchannel#8830
notnoelchannel said:
By the way can you contact me on Discord?
notnoelchannel#8830
Click to expand...
Click to collapse
the username is invalid mine: Mihot7#0068
Mihot7Forever said:
I'm not responsible for any demage that this rom did!
MRom v2.0
The goal of this rom is to put as much apps as posible (so you don't have to install gapps and... slow down your device)
(This rom will be developed only for older phones(becuse if you install gapps i will just lag as hell)
Special thanks to:
@notnoelchannel for main rom (5.1.1) https://github.com/NotNoelChannel/android_kernel_samsung_j13g/
old version Kostareka for the main rom! (https://forum.xda-developers.com/t/...nmod-11-microg-for-samsung-galaxy-j1.4284891/) (the rom is modification for cm 11 by Kostareka!)
CM developers
And google (for android)
Any apps dev who's app is in this rom!
Working and not
Working:
WiFi
RIL (Data, Calls, SMS)
GPS
MTP
ADB
Sensors (Screen rotating, etc)
Camera
Internal/External storage
Audio (playback, recording)
Tethering (WiFi, USB, see not working)
Voice Recording
Video (playback, recording)
Everything that's not listed in "Not working"
Not working:
FM radio (removed from the firmware, will implement it soon)
Bluetooth (tethering, connecting to devices, etc)
Offline Charging (boot your phone to twrp and charge (while connecting the cable) or grab an usb cable cut it in half and + to + and - to - on battery and cable )
(taken from @notnoelchannel post)
Kernel Source code
http://[URL]https://github.com/NotNoelChannel/android_kernel_samsung_j13g/[/URL]
Contributors
ROM OS Version: 5.1.1 Lolipop Funfact I was eating a lolipop while i was updating this rom to lolipop
ROM Kernel: idk
Version Information
Status: Stable
Created: 10.06.2023
Last Updated: 11.06.2023
Note:
Pls dont hate me for my english Im dumb and this is my 1st rom that i made myself! (2nd version of it (4.4.4->5.1.1)
Features:
Pou
Greenify
F-Droid
NewPipe
Root explorer (you must root)
custom wallpaper
more will come!
Wanna add apps?
contact me: on email [email protected]
via xda
or in this post in message add app name or apk file (Infected files will be reported!)
Note: old versions are still here
Click to expand...
Click to collapse
Way to go @Mihot7Forever ! ...
Here's something i'd like to share with anyone interested in running almost any J100H CM12.1 ROM on J110H j1pop3g... It's a workaround to make the ROM run on J110H, but for sure you'll find many bugs and lags.. It's a workaround for experimental purposes not for reliability or daily usage.
Get the J100H CM12.1 ROM you wish to run on J110H (like for instance version 2 up here ^^^ ), then add the contents of the zip file attached to the ROM and replace the ones inside... and use the attached boot image file when needed...
Special thanks to @smiley9000 and @notnoelchannel for their efforts, I just collected their work and zipped it in a file!
Antiquillium said:
Way to go @Mihot7Forever ! ...
Here's something i'd like to share with anyone interested in running almost any J100H CM12.1 ROM on J110H j1pop3g... It's a workaround to make the ROM run on J110H, but for sure you'll find many bugs and lags.. It's a workaround for experimental purposes not for reliability or daily usage.
Get the J100H CM12.1 ROM you wish to run on J110H (like for instance version 2 up here ^^^ ), then add the contents of the zip file attached to the ROM and replace the ones inside... and use the attached boot image file when needed...
Special thanks to @smiley9000 and @notnoelchannel for their efforts, I just collected their work and zipped it in a file!
Click to expand...
Click to collapse
after i get back from school i will try
Mihot7Forever said:
after i get back from school i will try
Click to expand...
Click to collapse
I wish you luck!

Categories

Resources