Database Info

Custom binary blocked by FRP lock

Running: Galaxy S7 with SupermanRom 2.3
Yeah, I did it... Disabled all USB debugging and OEM unlock due to some testing and forgot about it during a subsequent reboot.. Now stuck with bootloop "Custom binary blocked by FRP lock"
Is there any way to fix this without a full recover to stock ROM?
If not, can the data at least be recovered some way?
Very thankful for any help!

do Flash with stock firmware latest than let me know status.

In short, no there isn't really flash via odin and start again

Custome Binary(boot) blocked by frp lock

Hello, this is my first post here.
I know the same title was used in so many posts, but I think my case is different.
I have this g610f which had frp lock and was on 7.0, so I downloaded and flashed the combination rom(I do not have the box), made sure usb debugging was on and tried to go back to stock(worked for me with s8 and a310).
Although this time if I flash only AP it says "custome binary(boot) blocked by frp lock" and if I try to flash the BL with AP it says "secure check boot failed".
Also tried to flash TWRP, recovery was blocked by frp lock

whitymighty said:
Hello, this is my first post here.
I know the same title was used in so many posts, but I think my case is different.
I have this g610f which had frp lock and was on 7.0, so I downloaded and flashed the combination rom(I do not have the box), made sure usb debugging was on and tried to go back to stock(worked for me with s8 and a310).
Although this time if I flash only AP it says "custome binary(boot) blocked by frp lock" and if I try to flash the BL with AP it says "secure check boot failed".
Also tried to flash TWRP, recovery was blocked by frp lock
Click to expand...
Click to collapse
did you unlock the OEM in the developer option?

FRP Locked error

Guys, I tried to flash TWRP recovery on my A7, build number xxu1asa4.
I unlocked OEM first, then booted into download mode to install system and suddenly disconnected my phone from PC:
"Custom binary blocked by FRP lock"
I have locked OEM now, no recovery access, and there is a soft brick in my smartphone. :crying:
Does anyone know how to fix that issue?

NickDeveloper said:
Guys, I tried to flash TWRP recovery on my A7, build number xxu1asa4.
I unlocked OEM first, then booted into download mode to install system and suddenly disconnected my phone from PC:
"Custom binary blocked by FRP lock"
I have locked OEM now, no recovery access, and there is a soft brick in my smartphone. :crying:
Does anyone know how to fix that issue?
Click to expand...
Click to collapse
I am also experiencing this problem, the solution is to take in a technician or authorized Samsung.

NickDeveloper said:
Guys, I tried to flash TWRP recovery on my A7, build number xxu1asa4.
I unlocked OEM first, then booted into download mode to install system and suddenly disconnected my phone from PC:
"Custom binary blocked by FRP lock"
I have locked OEM now, no recovery access, and there is a soft brick in my smartphone. :crying:
Does anyone know how to fix that issue?
Click to expand...
Click to collapse
You should've not unlocked the OEM, but also disable the FRP Lock. Initiating a factory reset from Settings (which will force you to enter your Samsung Account password) would've done the trick.
To get your Phone running again, reflash Stock ROM and just repeat the process.

rooted latest version of 8, got FRP error on reboot, fixed. How to get rid of this?

I rooted my s7, latest version of 8.0 United Kingdom (g930fxxu4esae build r16nw.g930fxxs5esf6). I used TWRP and magisk.
All was well until I rebooted, then got the dreaded "custom binary blocked by frp lock". I was able to take the stock rom and install the AP file, and now it's working again except that of course root is gone. I suspect that if I attempt to root again, I will run into the same error on a reboot.
I've done some googling but haven't found anything really reliable sounding about getting around this problem.
EDIT: UPDATE: I've flashed the latest version of BTU on phones 1 and 2. I've successfully rooted phone 1 and it seems to be sticking. Phone 2 I'm still working on, it doesn't have to be rooted though as it's more of a backup for gaming. Thanks again to everyone in this thread for all the good advice and info.

You are going to have to re flash you current firmware unrooted and before you root, enable OEM unlocking in developer options AFTER setting up your google account(you have to use the same google account as you did before), unfortunately there is no way of force enabling OEM unlock with a flashable zip on the s7, well least to my knowledge. FRP lock is googles factory reset protection, which stops people from factory resetting a phone and then just use their google account instead of the one they don't know the password too, and it stops custom binaries like trwp from booting and even a stock binary that has been rooted from booting because it thinks you could be trying to bypass FRP.
Enabling OEM unlocking with disable FRP lock on the device, allowing you to use custom binary and boot normally without the checks.

Viper4060 said:
You are going to have to re flash you current firmware unrooted and before you root, enable OEM unlocking in developer options AFTER setting up your google account(you have to use the same google account as you did before), unfortunately there is no way of force enabling OEM unlock with a flashable zip on the s7, well least to my knowledge. FRP lock is googles factory reset protection, which stops people from factory resetting a phone and then just use their google account instead of the one they don't know the password too, and it stops custom binaries like trwp from booting and even a stock binary that has been rooted from booting because it thinks you could be trying to bypass FRP.
Enabling OEM unlocking with disable FRP lock on the device, allowing you to use custom binary and boot normally without the checks.
Click to expand...
Click to collapse
Correct basically turn FRP lock off it's a pain in the ass.
Also @kettir this is the final release of BTU not the one you have in your post 》》https://www.sammobile.com/samsung/galaxy-s7/firmware/SM-G930F/BTU/download/G930FXXU5ESD2/270504

cooltt said:
Correct basically turn FRP lock off it's a pain in the ass.
Also @kettir this is the final release of BTU not the one you have in your post 》》https://www.sammobile.com/samsung/galaxy-s7/firmware/SM-G930F/BTU/download/G930FXXU5ESD2/270504
Click to expand...
Click to collapse
Thanks for more great advice and info. It appears that now the requirements are:
Download the latest BTU as per your note because I like it better
Flash it to attain a "stock" system.
Go through the minimum setup after reboot and get developer options.
Set up google account
Enable OEM unlocking (and USB debugging of course)
flash TWRP
go into recovery immediately
Use TWRP to flash magisk
go back into download mode immediately
flash only the AP from the stock firmware
And this might, possibly, achieve root with magisk, while keeping the stock bootloader. That is, if I understand what TWRP and magisk are actually doing to the system. I.e., TWRP replaces the system part that handles recovery, while magisk roots the phone without changing the system, so that TWRP is the problem for FRP.

Question Removing the "Phone is locked can't be used without authorization"

Hey
Is there new 2023 methods to get rid of phone is locked screen? I enabled adb and removed kg lock. Upon disabling systemUI, the screen is blank, How can I manage to get rid of that lock by unistalling system app, or installing new systemUI and getting rid of the original one which is locked.

BARMASAI said:
Hey
Is there new 2023 methods to get rid of phone is locked screen? I enabled adb and removed kg lock. Upon disabling systemUI, the screen is blank, How can I manage to get rid of that lock by unistalling system app, or installing new systemUI and getting rid of the original one which is locked.
Click to expand...
Click to collapse
Install Odin on your camputeur and reinstall your whole system with it.
the A125F system firmware is at this link : https://samfw.com/firmware/SM-A125F

To get to re install the system is not that easy. First no option to factory reset at recovery mode, then locked bootloader. If you can assist on the same, it will really help

give it back jamal

clarify

BARMASAI said:
To get to re install the system is not that easy. First no option to factory reset at recovery mode, then locked bootloader. If you can assist on the same, it will really help
Click to expand...
Click to collapse
If the bootloader is locked, then connect the phone at your pc and press volume + and volum - until the phone starting in download mod and there re install system with odin.

BARMASAI said:
Hey
Is there new 2023 methods to get rid of phone is locked screen? I enabled adb and removed kg lock. Upon disabling systemUI, the screen is blank, How can I manage to get rid of that lock by unistalling system app, or installing new systemUI and getting rid of the original one which is locked.
Click to expand...
Click to collapse
get into BROM Mode, use SP Flash Tool to flash normal firmware, then use FRP Bypass to bypass setup, then turn on OEM Unlocking, reboot to download, enable oem unlocking, reboot to download again, and flash TWRP, from TWRP flash a GSI or a custom ROM.

TheWorldYT said:
get into BROM Mode, use SP Flash Tool to flash normal firmware, then use FRP Bypass to bypass setup, then turn on OEM Unlocking, reboot to download, enable oem unlocking, reboot to download again, and flash TWRP, from TWRP flash a GSI or a custom ROM.
Click to expand...
Click to collapse
This may or may not work too, I have never tried this method before, but it looks fine for the removal of that screen. or in SAMFW Tool I think there is a MDM Bypass, if not then you can use SAMFW tool to bypass the FRP on that phone.