Anyone get problem with alarm not running?
I got notification that there is upcoming alarm but never started to ring.
This used to happen on my 6T, could never find out why. I just ended up freezing the stock Clock app and installed Google Clock, which worked.
Since I switched to the 7 Pro, I haven't had the issue.
rickysidhu_ said:
This used to happen on my 6T, could never find out why. I just ended up freezing the stock Clock app and installed Google Clock, which worked.
Since I switched to the 7 Pro, I haven't had the issue.
Click to expand...
Click to collapse
i raised bug
yeah google clock works fine
rickysidhu_ said:
This used to happen on my 6T, could never find out why. I just ended up freezing the stock Clock app and installed Google Clock, which worked.
Since I switched to the 7 Pro, I haven't had the issue.
Click to expand...
Click to collapse
Having the same issue with no volume on alarms. Did some searching this morning and did not have any luck.
Not sure I understand the concept of "Freezing" with the 1+7 pro. Can you explain in a little more detail?
Are there any known issues if I "disable" the stock clock app and use the Google Clock?
thanks in advance,
I use smart alarm free and works amazing
Nekromantik said:
Anyone get problem with alarm not running?
I got notification that there is upcoming alarm but never started to ring.
Click to expand...
Click to collapse
Yeah i was having the same problem, now using timely app and also samsung clock on my old note 5
I have been a long Google clock user. Used timely (for its ability to sync over multiple devices) for a while but I also found I like to keep some things simple. With simplicity in mind, I am trying to address the low alarm volume with the stock app and have been doing some work on the stock clock app. In settings, all the way at the bottom is the "increasing volume" toggle. When I disable this setting, my alarms behave normally. Meaning, when my alarm goes off at 06:00, it wakes me up, with the alarm I have selected. This operates the same with timers and anything else that uses the alarm volume (Interestingly, when BT is connected, the volume is still decreased but one problem at a time).
Are some of you willing to check and see if you have the same outcome?
thanks in advance.
I have 2 alarms that go off in the morning. The first one never rings but the second does.
Just got my phone yesterday, so I tried the stock clock. Turned volume up to Mac and went to sleep.
Didn't hear it, and I was late to work. I'm going back to Google clock as well.
Anyone find a fix for this?
slayerh4x said:
Anyone find a fix for this?
Click to expand...
Click to collapse
Beyond using another clock app? Not sure. Its been posted to the 1+ community boards. Little action there though.
This is a really weird issue. On mine only the first alarm wouldn't ring, then none. I installed the Google Alarm and it would sound for the second alarm but today didn't at all.
I wonder if it's something to do with hibernation?
piperthedj said:
Beyond using another clock app? Not sure. Its been posted to the 1+ community boards. Little action there though.
Click to expand...
Click to collapse
slayerh4x said:
This is a really weird issue. On mine only the first alarm wouldn't ring, then none. I installed the Google Alarm and it would sound for the second alarm but today didn't at all.
I wonder if it's something to do with hibernation?
Click to expand...
Click to collapse
Interesting thought. If you go into battery optimization the stock clock app is not even listed. I switched Google Clock over to "Don't optimize." might as well give it a try.
I'll report back in a couple days,
Cheers
Related
I searched the Raphael forums for this and did not find an answer so here is the problem.
My HTC FUZE is running the stock rom with TF3D and my alarm did not go off this morning. I had a calender event scheduled with a 15 min reminder for 8 am and an alarm set for 9 am. The calender event went off as planned but with such a quiet noise it didn't wake me up, and I did not dismiss it obviously. So then the alarm notification also did not go off because there was already one notification that was not dismissed yet. When I check the title bar and click the alarm icon that is there, is brings up both of the two notifications at the bottom of the screen and I can dismiss them. If there is no calender event to dismiss it works fine. I still have to click on the title bar to get it to pop up at the bottom at all though. So I am hesitant to make any calender events with alarms at all for fear that my alarm clock won't work!!!!
Please provide any insight into this that you can!!! Thanks in advance...
Without any calander events and an alarm set for 6:15AM, it has failed to go off every day since I've had the phone. I just installed pTravelAlarm, the same one I used on my Tilt, and it's been working fine.
Not a Fuze issue - rather, a Window's Mobile problem - well documented -
I installed g-alarm and it warned that my device (Fuze) may suffer from a notification bug and that it had to reboot to fix it (guessing registry fix). So apparently someone's aware of the alarm bug/issue.
Haven't had any issues since though (with gAlarm)
I too have the alarm bug on my Fuze running latest ROMeOS. Going to give gAlarm a try like others have suggested.
laakness said:
I too have the alarm bug on my Fuze running latest ROMeOS. Going to give gAlarm a try like others have suggested.
Click to expand...
Click to collapse
just did the same thing
agentdr8 said:
I installed g-alarm and it warned that my device (Fuze) may suffer from a notification bug and that it had to reboot to fix it (guessing registry fix). So apparently someone's aware of the alarm bug/issue.
Haven't had any issues since though (with gAlarm)
Click to expand...
Click to collapse
Guess that is what I will try also. It definitely sounds like a WM bug...
I also have an alarm problem, although lights go off, the alarm doesn't ring. I also have problems with ringing on incoming calls. The speaker otherwise works fine. I have Natfv4.0 installed. Do any of the roms fix this problem?
my
TP's alarm works but the notification dosent pop up to give me the option to dismiss it? how do i fix that?
Is there a registry fix for this?
I don't get pop-up windows any more - I think since i turned off threaded SMS.
Wasn't that an initial problem with the Fuze? I remember having that issue. Just flash to a newer build OS and you'll be fine.
Work phone, not an option.
Surely there's a registry doodad I can change?
It's a Windows Mobile problem as noted, something about duplicated notifications. One suggestion was to download sktools, and use that to clear up your notification que. It is a registry thing I believe, but it's rather a pain in the butt to find where the notifications are and what to delete. SKtools Lite I think can do it, I know it can scan the notification queue and clear it up, but I've never had the problem so far. Would think that Microsoft would have at least made sure the alarm function of a business phone works.
I wanted to use the stock alarm for my X10 mini pro, but it ONLY sounded off once and DOES NOT REPEAT. As a result, I got a warning letter from my work for going to work late.
Now, I'm having trouble finding a good alarm clock, that sounds off the alarm and repeats UNTIL dismissed.. can anyone reccommend me?
if you Snooz it and not Dismiss it will go off again in 15min, that is all i do with my X10
Try kaloer clock
Sent from my X10i using XDA App
or digital clock by social & mobile.
Mobzter said:
Try kaloer clock
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Yeah, Kaloer clock is amazing. Check it out
Android Variations: Check em out!
Math Alarm Clock (the one I use)
One of the best apps EVER.
Also, if you can get good night sleeps get Smart Alarm Clock (it detects by movements the phase of sleep you are so I wakes you up on REM ) (it kindda work, but BLOWS MY BATTERY)
i use "Alarm Klock"(free on the market) :
you can param snooze timer, use MP3 as sound, progressive volume(settable), vabrate (or not), set label name for each alarm ...
For snooze : there a giant button
to stop the alarm, there a button ton slide (like to unlock an iPhone)
im having the same problem after i got the OTA update (on rogers network in canada btw)
the alarm would go silence on its own after a minute of going off, and then it doesnt repeat
:S
How about setting a couple of alarms with the stock app instead of one?
I use shaketowake.
Have to shake every morning about 20 times, and shake it hard for 1 alarm. Believe me you will wake up. First time it took 5 min to shake.
Kaloer clock was working perfectly before the OTA update.
After the update....its a bit slow and not as responsive.
Do you guys have the same issue with it?
royalbloodvi said:
As a result, I got a warning letter from my work for going to work late.
Click to expand...
Click to collapse
Geesus, how late were you...?!?
k1sr said:
Geesus, how late were you...?!?
Click to expand...
Click to collapse
Dont think he went in till the next day rflmao!!
Which update version you running? I didn't know this issue cos I always wake up after first alarm, if the alarm really only go off once and nvr repeat, I have to start using new alarm.
Sent from my X10i using XDA App
Since the JB update, the standard clock's alarm has stopped working properly. Prior to JB if an alarm was set and the tab was closed/charging the alarm would go off continuously and the tab would vibrate, I would unlock with my PIN and there would be a dialog up to either hit "dismiss" or "snooze".
Since JB, if the tab is locked (open or closed) it just beeps once very briefly (sounds like it is being "caught" and cut short), does not vibrate at all, and when I unlock and open it, there is a little notification on the notifications menu with the alarm info. If I click on that, it opens a dialog that says "dismiss" or "snooze". If the screen is not locked, it behaves exactly like it did above with no notification.
Anyone else see this or who could try reproducing it? I have not messed with any settings, when I look at them everything is like I would expect. I have never seen an alarm sent to the notification tray rather than sounding and this behavior strikes me as a bug.
Anyone have an alternate alarm clock they use with TF and JB?
You are not alone. I've deleted the clock cache, done a hard reboot and still the alarm only gives a brief "chirp" and is heard no more.
I had come to rely on the alarm in my travels as it has worked without fail whether on or in sleep mode- until the jelly bean update.
BoulderBill said:
You are not alone. I've deleted the clock cache, done a hard reboot and still the alarm only gives a brief "chirp" and is heard no more.
I had come to rely on the alarm in my travels as it has worked without fail whether on or in sleep mode- until the jelly bean update.
Click to expand...
Click to collapse
Thanks for the confirmation of the issue. At least I know someone else is seeing this and it is not some crazy setup issue. I am disappointed too. I've been using this in lieu of a real alarm clock while in a temporary living situation, so it's something I want to find a solution for...
Tested same thing, I dont use the feature but it is broke how you described it.
zenaxe said:
Since the JB update, the standard clock's alarm has stopped working properly. Prior to JB if an alarm was set and the tab was closed/charging the alarm would go off continuously and the tab would vibrate, I would unlock with my PIN and there would be a dialog up to either hit "dismiss" or "snooze".
Since JB, if the tab is locked (open or closed) it just beeps once very briefly (sounds like it is being "caught" and cut short), does not vibrate at all, and when I unlock and open it, there is a little notification on the notifications menu with the alarm info. If I click on that, it opens a dialog that says "dismiss" or "snooze". If the screen is not locked, it behaves exactly like it did above with no notification.
Anyone else see this or who could try reproducing it? I have not messed with any settings, when I look at them everything is like I would expect. I have never seen an alarm sent to the notification tray rather than sounding and this behavior strikes me as a bug.
Anyone have an alternate alarm clock they use with TF and JB?
Click to expand...
Click to collapse
It's not a bug since it's working fine on by tablet. My clock version is 2.03 and default ringtone is celsium. Did you tried to wipe DATA and CACHE, then reboot? Did you freeze any system app? Could you try the same ringtone as mine?
It is a bug or an intended feature to save power. It only beeps correctly if the clock is on the screen, either bright or dim. If the screen is off as in sleep mode, then it beeps once only then stops.
My wife certainly noticed yesterday morning! Good thing that i had an alarm set also!
Sent from my ASUS Transformer Pad TF700T using xda premium
Also confirmed the issue
I have the same exact problem
The day after the update I set it to wake me up the next morning and it didnt work either so now I leave it plugged in and the screen open in the dock and it works. I dont know what I did the first night but I almost didnt wake up. I also noticed if you put the volume all the way down to vibrate the alarm doesnt go off aswell but ICS work fine. All other sounds on silent but alarm still sounded off on ICS.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Me too. So, anyone let Asus know about this bug yet?
haha just found out this morning too. i had set the infinity alarm as my backup alarm because i just flashed a new rom on my phone. good thing the phone alarm still works. that could have been nasty
ya found this out the hard way this morning, when I was 45 minutes late for work.
is it due to the tablet going to sleep? I know in ICS i had the power settings set to never sleep if plugged in. cant find the equivalent 'if plugged in' settings. so for now I will test it if i set it just never sleep ever.
Here's a fix until Asus sort it out - keep the clock app open when you shut the tablet off. I think it's something to do with the alarm's Snooze/Dismiss notification. I'd keep a backup alarm set even using the fix,though - at least for a little bit.
I don't even have a TF700, but my fellow editor over at Pocketables does and wrote about this issue. I threw together a Tasker project that sort of fixes this, at least makes the alarm make some noise again. Exported it as a standalone app and he tells me it works. Details and download here if anyone would like to try it out: http://www.pocketables.com/2012/10/transformer-pad-infinity-temporary-alarm-fix-app-download.html
Details about what it does and disclaimer is in that post as well.
I have the same issue. Anyone here try working around this bug via another market alarm app? I'm at work at the moment so can't try -_-
Same problem here. I've stopped using it until this problem is resolved.
bluejay2345 said:
Same problem here. I've stopped using it until this problem is resolved.
Click to expand...
Click to collapse
Feel free to try the fix I stated in the comment above, it does work.
I'm using Alarm Clock Extreme Free until this gets sorted out.
I tried flashing DeskClock.apk from several diff JB roms (stock/AOKP/CM10) but it keeps giving force close :\
After the last OTA update in version 5.1.1 on my SM-G920I I have this problem with Timely Alarm Clock:
Alarm (Timely application) is set at 7:00 am and sometimes does not ring exactly at 8:00 but at 8:04 or 8:07 or something like that.
Exactly the same here. Also after hitting the snooze button the alarm doesn't go off again!
Sent from my SM-G920F using XDA Free mobile app
MAkS1 said:
Exactly the same here. Also after hitting the snooze button the alarm doesn't go off again!
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
I havent problems with the snooze button, work ok. But the alarm sound 3 or more minutes late, and the snooze too.
I tried restarting and clear cache from recovery.
I tried factory reset, no luck...
Sent from my SM-G920F using XDA Free mobile app
I believe that is the Samsung traditional and cannot be changed, they always late to push updates so as their alarm clock.
MAkS1 said:
Exactly the same here. Also after hitting the snooze button the alarm doesn't go off again!
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
TheEndHK said:
I believe that is the Samsung traditional and cannot be changed, they always late to push updates so as their alarm clock.
Click to expand...
Click to collapse
The problem is with Timely Alarm clock is not the official samsung alarm.
Qix84 said:
The problem is with Timely Alarm clock is not the official samsung alarm.
Click to expand...
Click to collapse
Indeed, no kidding, this is not my first time to hear it with Samsung phones. It must be also happened in some other models. So it is real a Samsung traditional.
Same problem here. Timely works only sporadically after the latest 5.1.1 update. Very annoying.
Other timed apps such as Tasker periodic time profiles have the same problem.
Anyone found any solution?
I'm in the same boat, and trying out different solutions as days pass by, without much luck so far.
My simple hour chime task became a bloated piece of code with many different triggers, trying to wake-up the device in time for the task at hand.
On the sad side I also checked other apps out (Macrodroid, E-Robot, Automate) but non of them come near the power and ease of use of Tasker.
I really hope that someone can find a solution soon!
Here is the solution to the time-based profile not triggered: http://forum.xda-developers.com/showpost.php?p=62018672&postcount=196.
It's not hard but requires root and build.prop editing by the way.
I am having this same problem in Timely and am not ready to root my phone yet. Has there been any other news about the issue?
Updated last week. Now no alarm/countdown app (apart from the built in one) will give any sound?
All permissions and notifications are set on and power saving is set to no restrictions.
I've installed 5 different alarm app and none of them will trigger a sound or even get the phone to vibrate!
They all look as if they should be working, the display is flashing but that's as far as they get.
I've restarted the phone many, many times. That doesn't change anything.
I'm guessing that it's an OS bug, but can anyone suggest a workaround that might help?
steve1221 said:
Updated last week. Now no alarm/countdown app (apart from the built in one) will give any sound?
All permissions and notifications are set on and power saving is set to no restrictions.
I've installed 5 different alarm app and none of them will trigger a sound or even get the phone to vibrate!
They all look as if they should be working, the display is flashing but that's as far as they get.
I've restarted the phone many, many times. That doesn't change anything.
I'm guessing that it's an OS bug, but can anyone suggest a workaround that might help?
Click to expand...
Click to collapse
Works fine with me. Check the Alarm sound
RubbaBand said:
Works fine with me. Check the Alarm sound
Click to expand...
Click to collapse
Alarm sound is on and works with the built in clock/alarm but no third party app will make a sound or even vibrate!
There's a thread on Reddit from people with the same problem, so it would seem to be an issue linked to the Miui 12 update so I guess we have to wait for an update on the update!!
steve1221 said:
Alarm sound is on and works with the built in clock/alarm but no third party app will make a sound or even vibrate!
There's a thread on Reddit from people with the same problem, so it would seem to be an issue linked to the Miui 12 update so I guess we have to wait for an update on the update!!
Click to expand...
Click to collapse
I don't know about other people but I have tested out 2 third-party apps from the play store just for you and they're both working fine
RubbaBand said:
I don't know about other people but I have tested out 2 third-party apps from the play store just for you and they're both working fine
Click to expand...
Click to collapse
Thank you for trying that.
I don't know why, but the 'Clock' app you've tried works on my Mix 3... None of the others I've tried do and I've just retried them all! I can not explain how or why that's the case???
steve1221 said:
Thank you for trying that.
I don't know why, but the 'Clock' app you've tried works on my Mix 3... None of the others I've tried do and I've just retried them all! I can not explain how or why that's the case???
Click to expand...
Click to collapse
Lol that's weird, maybe it depends on the way that they work. If you want I can test the ones that doesn't work for you.