Related
Hey guys,
I've been having a strange issue with my KGL unit since I purchased it.
My car came from the factory with a reversing camera and everything was fine with it on the original multimedia system.
Since I've installed the KGL unit, the image i get from the reversing camera is mirrored... left is right and right is left...
Also it seams that the picture quality is a lot worse (to me it looks a lot like when you connect an NTSC signal to a PAL TV or vice versa)
During the day I can see OK but at night is is almost impossible to distinguish anything... (it was OK with the original multimedia unit)
I've tried different KGL MCUs, tried different settings in the factory menu, stock and custom firmwares.
When I purchased my KGL unit, it was a PX3, since yesterday I upgraded it to PX5.
Any ideas?
Never mind guys!
I've just flashed the latest HA MCU 2.59a on my KGL unit and oh miracle! The camera is no longer mirrored!
I'm happy now!
That mirroring can easily be fixed in settings, extra settings ,
I have a GKL unit as well , might try that mcu I'm still on kgl 2.54-4
Petesky said:
That mirroring can easily be fixed in settings, extra settings ,
I have a GKL unit as well , might try that mcu I'm still on kgl 2.54-4
Click to expand...
Click to collapse
Which setting will that be? I've tried every setting in the factory menu before finally trying tha HA MCU...
OrionBG said:
Which setting will that be? I've tried every setting in the factory menu before finally trying tha HA MCU...
Click to expand...
Click to collapse
Settings, extra settings. (I think)
Not in factory settings
Nomader0 said:
Settings, extra settings. (I think)
Not in factory settings
Click to expand...
Click to collapse
Yip , in settings , extra settings , your looking for reversing x-mirror
Does it sometimes take a second or 2 even 3 to before see the image from the rearview camera on the screen after putting the car in reverse? My stock headunit used to switch instantly. This kinda bugs me since I need to parallel park in tight spots all the time. I just want to see if this is only happening to me or this is a known issue. Mine is a PX3 with 2GB ram with HA MCU.
Hi, I have an px5 xtrons and a problem with the clock on Android 8 (stock and malaysk rom) When I restart the car the unit have the old time of shutdown. (Unit connected to battery and no problem with android 6) Canbus is set on my model car and I have this problem, but if I set canbus model to none the clock works ok. I try to change canbus box but same issue. Anyone have a solution? Thanks
edit: even with the last malaysk android 6 rom same problem. Is it possible to solve putting downgrade version of clock app?
AlexRuhl said:
Hi, I have an px5 xtrons and a problem with the clock on Android 8 (stock and malaysk rom) When I restart the car the unit have the old time of shutdown. (Unit connected to battery and no problem with android 6) Canbus is set on my model car and I have this problem, but if I set canbus model to none the clock works ok. I try to change canbus box but same issue. Anyone have a solution? Thanks
edit: even with the last malaysk android 6 rom same problem. Is it possible to solve putting downgrade version of clock app?
Click to expand...
Click to collapse
I've had the same issue for probably the past year or so when I first started playing with custom roms. I'm pretty sure it happened after doing an MCU update. I have GS PX3 MTCD running hal9 rom. I've tried disabling network time etc but no difference.
When booting the headunit the time appears to be correct, then it changes to the wrong time, then after a few mins when either GPS or wifi has got a connection it corrects itself. I haven't tried changing the canbus model in factory settings as it's already correct.
I've found that the Clock app from Google works. All other including the stock clock keeps the shutoff time.
same problem here after upgrading Xtrons PX5 unit to Android 8.... it seems that somethings changed in CAN-Bus communication. Where bevore the car could write the correct time into the HU it's not possible anymore and the wrong (stucked) time get written into the Dashboard. The time will not synced when the HU is in standby (fastboot)... but will synced within 1 minute if i make a full boot.
dud89 said:
I've found that the Clock app from Google works. All other including the stock clock keeps the shutoff time.
Click to expand...
Click to collapse
hi, can you explain in more detail haw you managed to make clock work with google clock app?
i have installed it but no changes. the clock still shows old shutdown time
Hi I'm having the same issue with my xtrons head unit. Did anybody figure out a fix for this?
Hello,
I have the same problem. I have tried to add clock app to the whitelist, (mtce-utils) but It doesn't work. The canbuis I don't know is working correctly, Torque applicacion can not detect ODB unit and I can not view any value.
I set the clock to get the time from GPS only and I ve never had a problem.
typos1 said:
I set the clock to get the time from GPS only and I ve never had a problem.
Click to expand...
Click to collapse
Yes, but it only works if you have GPS connection (outdoor). If you are into garage there is no GPS udpate.
I have XTRON PX5 unit with Malaysk 8.0 and I have set the following things on whitelist:
com.android.settings
com.android.providers.settings
com.microtek.hctwidget
com.android.deskclock
com.cyanogenmod.lockclock
I have used mtce-utils ehitelist and Graser Daisata Xposed modules and none of them works.
I have connected the unit to the battery to avoid losing memory.
What can be the problem?
Thanks!
Same problem here :|
Android 6.0 clock also not working
As of 11/30/2018 after doing an MCU update 2.83 for Android 6.0, my clock also stopped syncing with the car's when turning it back on. It also display the last time right before the car was turned off.
Turning on/off GPS update or network update or setting the clock manually makes no difference and does not fix issue. Hope to see a solution to this.
If you revert back to the original MCU version, does the clock start working normally again? I'm assuming it would... I would just revert back to the original MCU version and be done with it. Unless, of course, there is some specific fix in the newer MCU that you needed?
greygoose82 said:
As of 11/30/2018 after doing an MCU update 2.83 for Android 6.0, my clock also stopped syncing with the car's when turning it back on. It also display the last time right before the car was turned off.
Turning on/off GPS update or network update or setting the clock manually makes no difference and does not fix issue. Hope to see a solution to this.
Click to expand...
Click to collapse
Did you export you MCU config before updating the MCU ?
I don't mind reverting back to the original MCU version I had but the problem I had with that one was my audio kept going back to sounding like mono instead of stereo each time I started the car. When I played video or music sound would only come out on my right door speakers. I kept having to do a factory reset each time to get it to come out at both sides.
I haven't browsed through the forum enough to see if anyone else experienced similar issues or if there were fixes for this.
greygoose82 said:
I don't mind reverting back to the original MCU version I had but the problem I had with that one was my audio kept going back to sounding like mono instead of stereo each time I started the car. When I played video or music sound would only come out on my right door speakers. I kept having to do a factory reset each time to get it to come out at both sides.
I haven't browsed through the forum enough to see if anyone else experienced similar issues or if there were fixes for this.
Click to expand...
Click to collapse
You could try the latest MCU, they may have sorted it out, you dont say what unit you have.
You could also try updating to Ore, it may also be fixed in the latest ROM.
Thanks I'll have to give it a try. My unit is the HA 2150 V600 with the px5 chip.
HI did anybody manage to sort the clock issue out on the headunits thanks
I have been having this same issue for a long time and hoping to find a fix for it.
I have tried the Google Clock app, that did not work.
I have updated my MCU from Ver 1.81 to 2.65 to 2.75 and now on 3.0.1. None of these MCU versions fix this issue.
I have also tried the V2.75_sp and no change (Did not think this would help with this issue, but tried it anyways)
On each of the MCU versions above, I have tired multiple roms (Stock, Malyask and Hal9K) and no luck fixing the problem.
The only time I have been able for this to work is if I have wifi enabled and connected to a Hotspot and Network time sync selected in the settings/Date&Time. With this configuration the time sync works everytime.
Now when the time does not Sync and if I open the GPS Plus app, the time displayed in the app is correct. So based on this, the only thing I can think of is that somehow the time from GPS is not being pushed to the clock app.
Guys I think I found the solution, at least it works in my case. What happens actually is that the unit is set to autosleep and not to shut it down. So when the unit goes to sleep, everything freezes including the clock time. When you put back the key contact, the unit goes back to live and all the apps start again from the moment when they went to sleep.
The solution which seems to work in my case, is to set the unit to shut down after I turn off the engine. Of course, it takes around a minute to turn on back when I put the contact key, but because the whole unit has been shut down, when it starts again it checks also the time clock and it syncs with either the GPS time or with the network provider time zone (depends what you have set). In my case I use the GPS time zone and with this workaround everything works well now.
It's not so much the MCU updates but the actual system update. Going backwards to the 20171214 system update will get the clock working fine again and should work with the most recent MCU update (my instance). With this version I didn't have to bother with changing the auto sleep or shutdown settings since it's an inconvenience to wait for a full minute for the unit to boot up. Also did not have to change GPS or network time sync either. I turn the key ON and the clock just works right away.
Ok,
So I got a on some recommendations here.
now what? Are there any custom roms I can use?
I would recommend read trough the forums...
And no, there are no modded Android 9 Roms at the moment.
You have to wait for Hal9k_ and Malaysk to come out with one when they are done.
LinkseD said:
I would recommend read trough the forums...
And no, there are no modded Android 9 Roms at the moment.
You have to wait for Hal9k_ and Malaysk to come out with one when they are done.
Click to expand...
Click to collapse
I've spent hours on the forums but there is so much out there its hard to get a handle on. the last unit I had was a nu3001 and was a bit more straight forward.
I'm not sure I care about android 9 if there is a ROM I can put on mine that is android 8 or whatever I don't care as long as it de-china-fied. I'll continue to look but was hoping for a quicker answer as I'm about to pull the trigger on buttoning up the car with wiring and dash....
Thanks!
Stormbringer! said:
I've spent hours on the forums but there is so much out there its hard to get a handle on. the last unit I had was a nu3001 and was a bit more straight forward.
I'm not sure I care about android 9 if there is a ROM I can put on mine that is android 8 or whatever I don't care as long as it de-china-fied. I'll continue to look but was hoping for a quicker answer as I'm about to pull the trigger on buttoning up the car with wiring and dash....
Thanks!
Click to expand...
Click to collapse
Your px6 came with android 9 anyway. There is no custom roms for px6 at the moment. With that said, android 9 is what I'm running (px5) and has been the most stable out of any modded ROM available from Hal9k or anyone else. You'll need to wait before a modded release is issued . They are being worked on.
For the time being, you could install FCC Launcher for A9. There's a thread in the forums here.
Sent from my SM-N920W8 using Tapatalk
Furthermore you could root your unit aswell. Even it is just possible by using SuperSu at the moment with Android 9.
Youll find the guides in the forums.
i have orderd one to, same as in first post.
can anyone say if tomtom or tomtom nds is working on this unit?
geldorf said:
i have orderd one to, same as in first post.
can anyone say if tomtom or tomtom nds is working on this unit?
Click to expand...
Click to collapse
I have the Dasita max6 as well, and can confirm: TomTom works perfectly.
S1W-brn said:
I have the Dasita max6 as well, and can confirm: TomTom works perfectly.
Click to expand...
Click to collapse
thanks.. yours is also px6 processor?
Yes, latest version px6
My Dasaita Px6 head unit has been working flawlessly for a little bit less than a month aside from a few disconnects with Android Auto.
However, today my head unit crashed 2x. Each time I heard a speaker popping distortion noise for a second and then the head unit restarted.
The only app that was running was Spotify with the unit connected to my phone's hot spot. Weather was about 60F so it wasn't a very hot day.
Has anyone encountered this before and if so, do you know what might be causing it?
rubberchickenmob said:
My Dasaita Px6 head unit has been working flawlessly for a little bit less than a month aside from a few disconnects with Android Auto.
However, today my head unit crashed 2x. Each time I heard a speaker popping distortion noise for a second and then the head unit restarted.
The only app that was running was Spotify with the unit connected to my phone's hot spot. Weather was about 60F so it wasn't a very hot day.
Has anyone encountered this before and if so, do you know what might be causing it?
Click to expand...
Click to collapse
could be a wiring issue or might need to factory reset the unit. I think everyone should factory reset as soon as they get the unit anyway.
lennylen said:
Your px6 came with android 9 anyway. There is no custom roms for px6 at the moment. With that said, android 9 is what I'm running (px5) and has been the most stable out of any modded ROM available from Hal9k or anyone else. You'll need to wait before a modded release is issued . They are being worked on.
For the time being, you could install FCC Launcher for A9. There's a thread in the forums here.
Sent from my SM-N920W8 using Tapatalk
Click to expand...
Click to collapse
I'm having the same issue and was blaming Malaysk mod for this...
Have you solved the issue? I will go back to stock and factory reset everything next week (is there a MCU factory reset option?).
I too have experienced the same exact problem and it happens once or twice a day. The UI freezes for a few seconds then there is a loud crackling sound coming from the speakers for another few seconds followed by a crash and reboot. It appears to happen randomly when I'm interacting with apps and more than likely is not heat related since it's been only a few degrees above freezing here and has happened only a few minutes after turning on my car. I've also had freezes where the UI and all buttons stop working but the radio keeps playing and only a forced reboot fixes it. I'm on Malaysk full mod and plan to go back to stock to do some troubleshooting and see if it's hardware or software-related.
jwallsuva said:
I too have experienced the same exact problem and it happens once or twice a day. The UI freezes for a few seconds then there is a loud crackling sound coming from the speakers for another few seconds followed by a crash and reboot. It appears to happen randomly when I'm interacting with apps and more than likely is not heat related since it's been only a few degrees above freezing here and has happened only a few minutes after turning on my car. I've also had freezes where the UI and all buttons stop working but the radio keeps playing and only a forced reboot fixes it. I'm on Malaysk full mod and plan to go back to stock to do some troubleshooting and see if it's hardware or software-related.
Click to expand...
Click to collapse
I tried going back to stock and changing many different MCU versions with the same exact issues you are describing: freezing or rebooting in the first few minutes after starting the car.
Today I had another new issue: I had one of the described freezes but after shutting down the car the display of Dasaita went black but the touch buttons remained on (LEDs on). I had to disassemble the HU to unplug the power cable... This is not a small bug anymore, this is a huge issue, I am trying to contact support with no answers. Did you find a solution or have any suggestion?
Do you have stock recovery? Do you know how to install stock recovery?
I also would like to factory reset MCU setting but I have no idea how to do it. Did you change any setting in factory settings menu? I'm worried that it could be something there.
The Android Attorney said:
could be a wiring issue or might need to factory reset the unit. I think everyone should factory reset as soon as they get the unit anyway.
Click to expand...
Click to collapse
I have the same issue sometimes my HU crashes with popping sound. I blame MCU 3.37 but i am not sure. Maybe i should re-update it without cfg settings files because i flashed it with exported MCU settings and put the cfg file next to the img file when i flashed the new MCU
matrixx1 said:
I have the same issue sometimes my HU crashes with popping sound. I blame MCU 3.37 but i am not sure. Maybe i should re-update it without cfg settings files because i flashed it with exported MCU settings and put the cfg file next to the img file when i flashed the new MCU
Click to expand...
Click to collapse
Where do you get the cfg file? I always flashed MCU without cfg file but maybe we could get a cfg file from a device with no issues and flash it alongside the MCU.
Frankk said:
Where do you get the cfg file? I always flashed MCU without cfg file but maybe we could get a cfg file from a device with no issues and flash it alongside the MCU.
Click to expand...
Click to collapse
You create it for your unit from factory config menu. Or document factory settings before updating MCU, right. Perhaps search for more info or read wiki.
marchnz said:
You create it for your unit from factory config menu. Or document factory settings before updating MCU, right. Perhaps search for more info or read wiki.
Click to expand...
Click to collapse
Thank you, I'm going to read it, but I assume that the cfg file you create from the factory settings menu is a backup of your current configuration, not a real clean factory configuration, am I right?
Frankk said:
Thank you, I'm going to read it, but I assume that the cfg file you create from the factory settings menu is a backup of your current configuration, not a real clean factory configuration, am I right?
Click to expand...
Click to collapse
Yes but actually the only thing i changed is SWC settings for Canbus so i can configure it manually.
matrixx1 said:
Yes but actually the only thing i changed is SWC settings for Canbus so i can configure it manually.
Click to expand...
Click to collapse
You have a Dasaita MAX6, right?
If yes, can you send me a dmcu.cfg file generated with your device?
If you changed only that setting it is pratically a stock configuration, I think I changed something more...
I'm not sure if it is the normal behaviour but when I update the MCU or if I wipe data from recovery or if I do a factory reset from system settings, the MCU settings are never changed. My custom configuration is never overwritten or deleted.
Thank you,
Francesco Comi
Hi guys,
I have a Joying 10.1 inch head unit and and the GPS time and date is not correct, I have tried manually setting up the date on the settings and set the automatic on the settings but still won't update correctly. Has anyone experienced this? Is there a fix that you can suggest?
Unit: Joying 10.1 Sofia 3gr GTX MOD
I'm having the same issue with mine-emailed joying support and of course they weren't much help. It seems to have randomly started happening, then I did a full firmware flash and it still happens.
See this post from @IG_Vasilich : https://forum.xda-developers.com/t/...9a3-2018-04-22.3742482/page-119#post-84877441
修正 GPS 日期
Tried this on my Joying JY-UMS03N2 Intel unit, but the GPS date is still wrong. I guess the receiver itself needs updated firmware?
Also noticed in this thread that it may contain a Trojan, so will revert the C9 Server back if I can figure out how ? https://forum.xda-developers.com/t/...ing-rom-v9a3-2018-04-22.3742482/post-85024725
Anyone solved this yet?
Nobody has been able to solve this? Can anyone explain how this even happened? My headunit doesn't even connect to the Internet so my guess is that it was something preprogrammed.
Any word on a solution?
Hi all,
I have FYT UIS8581 Headunit, some Chinese without brand, android 10.
The Bluetooth app is horrible...
- phone contacts cleared on every start, and i should resync it on every engine start.
- call history isnt synced with phone..
I have Tried everything.. With no any success..
So, Im looking for Bluetooth app to replace the stock app.
It would be great if anyone that can export the Bluetooth app to apk and upload here.
Also, if someone has experience with replacing the stock bluetooth app, it would be nice to get some assistance and guidance.
Thanks.
I am using TS18 Topway Series UIS 8581. I'm not happy with the Bluetooth either. The internal microphone is too low on the other side. Did you solve your problem?
sagipael said:
Hi all,
I have FYT UIS8581 Headunit, some Chinese without brand, android 10.
The Bluetooth app is horrible...
- phone contacts cleared on every start, and i should resync it on every engine start.
Click to expand...
Click to collapse
Bugs
How difficult is it to fix bugs? Well for many years, these head-units suffer from a bug which deletes your Google contact's. It happened on the EKIY D7 as well, so it's not something new.
I did however find a workaround: the issue occurs, because your contacts are being synchronised by Google. However the contact list on the headunit is empty, so this synchronises to your phone once connected by bluetooth.
Many users have suggested to turn of allow sharing of contacts settings in bluetooth, but that results in not having your contacts on the headunit. So instead you should go to User>Google Account> and put off the synchronization of contacts. That fixed it, and than the bluetooth simply transfers you contacts to the headunit without deleting it.
Just like how it worked on my OEM unit from Suzuki, but if you don't use Google for you contacts. Then this bug would most likely not effect you.
From my review about Mekede M500s, which suffers from the exact same bug. I described the fix.
Mekede M500s Review
First impressions The shipment from Poland was just two days, that was something I was very happy with. It came in a unbranded box, and with a little manual. Which I found very useful, even there is a lot of information in the general FYT...
forum.xda-developers.com
TS18 UIS8581 4GB+64GB Android 11
Fake Device Test application does not open. how can i run