How can I mirror my phone screen to Samsunng Smart TV? I tried few Samsung Apps but without success. Did any one manage to do it? Also After I have installed Smartview app I can use my phone as a Pilot but I must first turn it on :S I could turn on/off my TV using Galaxy S8+ without problem...
Ok so I found it and want to share if someone will also have any problems.
This is built in feature.
Go to: Settings > Bluetooth &device connection > Connection preferences > Cast
Of course you need to be connected to the same network as your TV.
It works pretty nice.
Good luck all!
And just faced another problem. I can screen cast to my Samsung Smart TV without problem but when I try to do it on the older Samsung Smart TV version at my parents-in-law I have a problem.
First of all phone is finding TV very slowly and when it is found, I click to connect then it tries to connect, I get notification on TV that OnePlus is trying to connect and after 2-3 secods I get info on TV - disconnected and screen cast stops on my phone.
Using 9.5.4 EU soft version, TV is up to date.
Any ideas?
Related
I have bought the Samsung Note 3 (2014) edition recently to use for teaching Maths. I also have bought a Samsung All Share cast to use to connect it to the projector. I tried it on my tv at home and it works no problem but when I tried to connect to the school projector I experienced problems.
1. The All Share Cast connects to the projector via HDMI connection and the setup screen comes up on the wall
2. When try to connect using the pin method with my tablet or phone (S5), the pin will show up on the wall and I enter it on my phone and it begins to connect
3. But then as soon as it begins to connect, the screen goes black on the wall and I get an error message on my phone saying "screen mirroring has been disabled"
4. The projector image then goes back to the initial setup screens as explained in point 1.
Can anyone help me please?
It connects perfect to my tv but not to the projector in school.
Hi,
I cannot get my device to 'discover' a microsoft miracast adaptor I have plugged in my tv. This device supports wi-fi direct, so it should theoretically work!
What I did :
I decided to upgrade my system as it was starting to lag badly, after 2 years of use.. I wanted to upgrade to kitkat at lesat, so I could stream movies to a tv. That feature was quite attractive to me.
I acquired CM11 unofficial from this post - http://forum.xda-developers.com/showthread.php?t=2637079
full tablet wipe, (Forgot to backup SMS, argh) and it installed CM11 with kitkat 4.4.4 just fine. No problems that I can see, installed slim Gapps package - just for the play store, nothing else. Gonna install Gmail later.
Then I bought a chromecast, it was quite fiddly - It wouldnt find it on cast screen either, I discovered I needed it to run through a wifi network with a permanent internet connection. After this, it showed up on cast screen. Also, the streaming quality was complete crap - so I returned it and got a microsoft miracast adaptor - which apparently has better quality and doesn't need a wifi router!
I can't figure out how to get it to show up. The cast screen tab cannot find any devices. The adaptor sits in the tv, and it shows '"ready to connect" on there.
Since the tab for cast screen exists on my tablet, the functionality is there, and waiting to be used?
Any help please?
Do I need to do something like this - http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193 ?
So, no one has provided any tips yet... I'm going to go return this miracast adaptor before I can't get a refund for it.
But before I do, is there another forum category, or another place on the internet where I may be suggested to try for some troubleshooting advice?
This doesn't make sense to me - as the functionality WORKS, it is supported by the hardware, and the chromecast adaptor actually showed up before
i have a Pioneer AVH-X8700BT and it is both IOS Auto & Android Auto compatible.
Problem is it works fine with an iphone 6s but when i tried it with my new samsung galaxy s7 nothing works!
i tried using both Android Auto and the Mirrolink mode but both nothing.
Tried restarting both car device and phone but nothing.
Also tried with a samsung galaxy s6 and also nothing.
Any ideas?
Same issue here.
My S7 won't connect via Android Auto either. (VW Golf)
Do you have a setting inside the radio for pairing? At least with my radio you have to activate pairing to see the radio
Had the same problem with my S7 Edge from Verizon with my Pioneer 8100NEX. Finally figured out that I have to change the USB options to get it work. After you connect the USB cable, pull down the notification drawer and look for "Connected for charging" notification". Tap that and change "Use USB for" to "Transferring media files". Android Auto worked after that for me.
I didn't have to do this with my S4. Unfortunately for the S7 I have to do this every time I connect my phone. I found this thread because I'm looking for a way to make it the default but haven't had any luck yet.
I had the same problem. Thanks for posting this. Now I also am looking to set the default functionality. Crazy to have to manually switch this every time.
Thanks,
kt
marshmallow problem
[email protected] said:
I had the same problem. Thanks for posting this. Now I also am looking to set the default functionality. Crazy to have to manually switch this every time.
Thanks,
kt
Click to expand...
Click to collapse
If this works for you to connect - the default functionality can be found under developer options. You can manually force charging, MTP etc there. USB debugging - off / USB configuration - MTP
This is a known official marshmallow issue not isolated to GS7 , LGG5 has same issue listed in google support page. some devices (like my GS7) will not connect after switching USB connection options. I have tried every mode and mine will not work - need a more advanced workaround. I also can't root phone because of corporate network restrictions.
Anyone have an update on this? I have the same issue using Galaxy S6 Edge Plus. I've enabled the developer options and enabled USB Debugging and MTP for the USB connection type with no success. I also can't change options with the connection type in the notification panel.
S-P-R-O-U-T said:
Anyone have an update on this? I have the same issue using Galaxy S6 Edge Plus. I've enabled the developer options and enabled USB Debugging and MTP for the USB connection type with no success. I also can't change options with the connection type in the notification panel.
Click to expand...
Click to collapse
My S7 Edge Duos seemed to require the disabling of Car Mode as it was interfering with AA's connection. It's a default Samsung piece of unneeded. You can download "Package Disabler Pro for Samsung" from the Playstore. It will allow you to disable apks and stubs without root. I disabled Car Mode and now AA works with the Pioneer 8100 I have. the S7 worked fine with the wife's '16 Accord and AA which was my sticking point. I guess the Pioneers support Car Mode and Mirrorlink so it confuses the hell out of the deck. It's worth the 0.99 cents to see if this works for you. You can also disable all the other bloatware you don't want with it. So it's kind of a win/win for a buck.
Hi I have a Pioneer AVH X8890bt and I want to connect my s6 edge to appradio, however, everytime i plug my phone to the usb it gets connected to android auto, Could anyone guide me as to how to establish a connection. Also, there is a HDMI port at the back of my system and I have learnt that to connect a samsung device you need miracast dongle, so if I buy a dongle will i be able to use the touch function of my car audio or everytime I will have to be dependent on my phone. Please advice.
Hi,
I have tried alot and always failed Is there anyone who tried mirroring Xperia XZ to Samsung smart TV series 5?
if yes, can you help me in that?
Thanks,
In phone U have a miracast and TV also have screen mirroring option turn it on and connect a phone to TV that's all.
I have Samsung 6 series TV, Just turn on the screen mirroring option on your phone, on your tv just make sure that you select the allow option. You are done
Thanks for replies...
The problem is I cant see my TV from the phone. I use wifi direct and I get connected.
Then I open screen mirroring, but cant find the TV. I go to the source list in the TV and cant see the screen mirroring. I go to all share menu in the TV and cant find my phone. I even tried to connect to my TV wireless from my wifi list and nothing works as well.
Can you share the exact steps?
Thanks,
so any detailed instructions?
Are you running stock nougat? after the nougat update Google broke miracast, you can fix it with this guide I wrote up awhile back https://forum.xda-developers.com/xperia-xz/how-to/guide-fix-miracast-screen-mirroring-t3583743
Smacksmack206 said:
Are you running stock nougat? after the nougat update Google broke miracast, you can fix it with this guide I wrote up awhile back https://forum.xda-developers.com/xperia-xz/how-to/guide-fix-miracast-screen-mirroring-t3583743
Click to expand...
Click to collapse
Thanks alot for your reply... but do you think there is any solution for non-rooted device?
Hey everyone, can you test your screen mirroring feature on your phone and tell me if it works? I can't find many bug reports about it. For me it doesn't work.
My OnePlus 6 can presently cast the screen directly to my Roku stick and Roku TV without any issues.
I bought a 7 Pro (Oxygen OS 9.5.3 GM21AA) and enabled "wireless display" and this is what happens:
- I select Cast from the drop-down notification bar
- It searches forever without finding anything
- I click Settings
- It finally finds and shows me my available Roku device (or any TV that has screen mirroring)
- I select the one I want
- It says connecting
- instead of connecting, the list of eligible devices, including the one I am connecting to goes blank
- The list gets reset and nothing is connecting
Any attempt to try again, after I reset my phone, restarted my modem and my WiFi etc gives me the same situation.
Does anyone have any suggestions? I hate when older devices work great and newer ones don't. Both are running Android 9.
No? Just me? Lol
Hi, for me it works. Chromecast, shield tv, google home or integrated cast.
BUT, there is an issue with the resolution, my tv is 1080p, source too, but I have black margins around..
@cainman
1. You must have WIFI enable to be able to use Screen Mirroring.
2. Go to Cast setting and tap the 3dots and enable it.
Been Mirroring my device my device since day 1 without problems.