I'm wishing to flash Pie A750FN firmware into a A750F/DS phone via Odin.
Can these different model numbers take the same firmware?
I'm not familiar with this model (it's for a friend) and I am wondering if the firmwares are compatible.
The original CSC is XSG (UEA) and I wish to change firmware to either BTU or XEU (UK)
Would Odin accept this?
There will be no root involved, just stock firmware.
Any comments?
Thanks
Related
I have an S7 on MM, when are Nougat OTA's are coming to the UK? I don't bother rooting any longer but I am tempted to sideload if Samsung are going to take forever.
Depend on what s7 you have?
Edge G935
I'm on a sim only plan with BT so I own my phone rather than rent, I have spoken to BT who tell me its a Samsung OTA and they have no control, and Samsung merely tell me to to contact my Carrier.
Might end up sideloading!
It's already out. What CSC are you using?
Is the device network locked.
Can you install "Phone Info" app from play store and check which CSC is currently set as your active CSC. The CSC is the one based on which the updates are set.
kamranali44 said:
It's already out. What CSC are you using?
Is the device network locked.
Can you install "Phone Info" app from play store and check which CSC is currently set as your active CSC. The CSC is the one based on which the updates are set.
Click to expand...
Click to collapse
XEU
Unlocked
It's not been released yet from what i can see on SamMobile.
InfernalByte said:
XEU
Unlocked
Click to expand...
Click to collapse
I have the same UK firmware but with BTU. The difference is given below (Copied from someone on xda). https://forum.xda-developers.com/galaxy-s6-edge/help/btu-xeu-t3100911
"I think i worked out the difference between BTU and XEU.
BTU firmware are on phones that come directly from Samsung (unbranded)
XEU firmware are on Sim Free handsets that are generic (unbranded) but not from Samsung"
You can now decide whether to wait for XEU or flash BTU. If you do decide to flash, backup data first and confirm that the active csc is set to BTU for OTA to work.
mimo2008 said:
It's not been released yet from what i can see on SamMobile.
Click to expand...
Click to collapse
Is this mine? Listed after the update half way down the page?
https://www.sammobile.com/2017/01/1...mware-for-the-galaxy-s7-now-available-online/
kamranali44 said:
I have the same UK firmware but with BTU. The difference is given below (Copied from someone on xda). https://forum.xda-developers.com/galaxy-s6-edge/help/btu-xeu-t3100911
"I think i worked out the difference between BTU and XEU.
BTU firmware are on phones that come directly from Samsung (unbranded)
XEU firmware are on Sim Free handsets that are generic (unbranded) but not from Samsung"
You can now decide whether to wait for XEU or flash BTU. If you do decide to flash, backup data first and confirm that the active csc is set to BTU for OTA to work.
Click to expand...
Click to collapse
I may wait a few weeks, unless its done with the flash Icannot set XEU to BTU, there is no option.
kamranali44 said:
I have the same UK firmware but with BTU. The difference is given below (Copied from someone on xda). https://forum.xda-developers.com/galaxy-s6-edge/help/btu-xeu-t3100911
"I think i worked out the difference between BTU and XEU.
BTU firmware are on phones that come directly from Samsung (unbranded)
XEU firmware are on Sim Free handsets that are generic (unbranded) but not from Samsung"
Click to expand...
Click to collapse
Is your phone direct from Samsung? Mine is Sim Free, unbranded not from Samsung.
Exu is Ireland band by the looks of it.
InfernalByte said:
Is your phone direct from Samsung? Mine is Sim Free, unbranded not from Samsung.
Click to expand...
Click to collapse
I brought it from ebay but I did flash the BTU firmware myself. My phone orignally had multi csc which included BTU and had a german (DBT) csc set as active.
You cannot change the CSC by device but you can flash a firmware with completely different CSC and then flash the BTU one.
I flashed mine with O2U firmware which made it forget the multi csc and then flashed BTU which set the active csc as BTU. I originally flashed the first nougat update release by Samsung and then received the performance update using OTA.
This might make it simple "You are not getting the BTU OTA updates because you don't have BTU CSC but DBT. You flashed BTU Rom but it's a multi CSC Rom and it has inside your original DBT CSC. So your CSC didn't change to BTU...If you want to have BTU CSC so you can get OTA upfates from BTU you have first to flash a rom that it's CSC is not inside the multi CSC you have now, let's say for example a rom with EUR CSC. Then you CSC will change to EUR. After that you can reflash BTU Rom and your CSC will change to BTU...Then you can take the OTA updates from BTU normally..."
Check this thread - https://forum.xda-developers.com/ga...ta-updates-t3552316/post70923890#post70923890
Check post number 32, I added the screenshots over there as well.
There is http://updato.com/ as well if you want to download firmware faster (a lot faster than sammobile). I think they are official but have only checked one so far.
Backup the data first, flashing a different csc will factory reset the device.
That's what I kinda done I was on vodafone and preferred to be on btu so I flashed that instead but once I flashed it done wipe cache and data factory reset just to make sure all was ok on another note I kept wifi calling as well.
Hi all,
I'm back to Samsung after a number of years away at HTC and LG! Last Samsung was an S2 and so I've used Odin, reflashed firmwares, rooted etc. before so know my way around this stuff in a general sense.
I got an S7 from CEX recently to replace my broken LG G3 but the firmware on it seems to be a slightly older / foreign one and I want to get onto a clean UK / EU firmware, so I can keep stem with OTAs that I see friends' S7's receiving. My current firmware is baseband G930FXXU1BPJE, build number G930FXXU1ZPK4.
I've looked on SAMMobile and can see two options for UK unbranded; XEU and BTU. So my first question is what one should I use and what the difference is?
Secondly, when I use Odin to flash whichever one is correct, will I need to repartition? Or will factory resetting after flash be enough to properly correct the CSC?
Finally, will this still show up as an 'untampered' phone, and receive OTA correctly?
Thanks for the help.
XEU has the most updated firmware atm with a February security patch, where BTU is still on January afaik, both unbranded UK firmwares
If you flash them using CSC (Not HOME_CSC) which will reset the phone and change CSC, then you will remain KNOX 0x0 and receive OTAs for whichever CSC you choose, XEU or BTU
No need to repartition
I did read something about needing to flash to another CSC supported by the current CSC on your phone atm (Multi CSC) before flashing to the one you want to change to, but not sure about that, I've only ever switched between BTU and XEU, and BTU is multi CSC containing XEU too
*Detection* said:
XEU has the most updated firmware atm with a February security patch, where BTU is still on January afaik, both unbranded UK firmwares
If you flash them using CSC (Not HOME_CSC) which will reset the phone and change CSC, then you will remain KNOX 0x0 and receive OTAs for whichever CSC you choose, XEU or BTU
No need to repartition
I did read something about needing to flash to another CSC supported by the current CSC on your phone atm (Multi CSC) before flashing to the one you want to change to, but not sure about that, I've only ever switched between BTU and XEU, and BTU is multi CSC containing XEU too
Click to expand...
Click to collapse
Thanks, I'll stay alert to that possibility. I'll go with the XEU variant and hopefully be ok. Just need to backup my stuff first.
gyaku_zuki said:
Thanks, I'll stay alert to that possibility. I'll go with the XEU variant and hopefully be ok. Just need to backup my stuff first.
Click to expand...
Click to collapse
Hello, did you have any luck changing your CSC without Re-Partitioning ?
Im in the same situation right now (DDE CSC, still on 6.0.1) and I am kinda scared after reading so many posts where people bricked their phones.
Dear readers,
I want to have voLTE working on my SM-G920F.
I live in the netherlands (PHN) and my carrier supports volTE , in fact I have it working with android 6.0.1.
Is it possible to flash to BTU (UK, 7.0.1) with the CSC package from the PHN (6.0.1) or will this cause a (soft) brick?
So I would flash the following with ODIN:
BL: BL_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar.md5
CP: CP_G920FXXU5DPL3_CL8821257_QB11771442_REV02_user_low_ship.tar.md5
AP: AP_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar.md5
CSC: MODEM_G920FXXU5DPLD_CL2100313_QB_5298122_SIGNED.tar.md5 - (This one is extracted from the PHN firmware package)
Thank you in advance,
Hi,
You can try flashing the BTW package first without any modification, if the feature you want stops working, just flash your region CSC/Modem package afterwards and it should work again.
If the phone have a soft brick (which it shouldn't, it should work just fine), then you can attempt a downgrade or just flashing back the BTU CSC/modem and wait for your region to have Android Nougat.
All the best,
~Lord
Sent from my Galaxy S7 Edge using Tapatalk
And..
tell me bro.. did it work ??
Hi,
I expect this is a fairly repetitive question but I've been reading for a bit and getting confused.
I've got a Samsung Galaxy S8+ with model SM-G955F. It's an O2 UK phone with a CSC of O2U. I'm getting a bit frustrated that O2 still haven't released their Oreo build, but hearing people are happily flashing the BTU software to their devices.
I can see the BTU software for download here: https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955F/BTU/download/G955FXXU1CRB7/211557/
Is it purely a case of download Odin and follow the instructions to flash the firmware? Or do I need to do anything special to change my CSC from O2U to BTU first?
Thanks
the process will factory reset your phone but flashing the CSC of your choice is fine from O2, I had a phone from 3uk and it had a code I cannot remember but I flashed the OXM CSC just fine
I bought a new S7 (G930F) at ebay. When it arrived i wanted to update to the newest firmware, but i got an error notification.
I contacted Samsung and they told me to send it in.
They checked it and told me, that they are not willing to help because the phone is flashed with a wrong firmware. I bought it as a new device. This is unpleasant.
The seller doesn't answer my messages, so i thought maybe i can flash a new firmware by myself. The actual firmware is working but it is outdated. (1. August 2018)
But how can i find out which firmware is correct for this phone? How to say if it is exynos or snapdragon?
The phone information
Modellnummer: SM-930F
Seriennummer: 5AF94C0C
Buildnummer: R16NW.G930FFXXU7CRH2
Kernel: 3.18.71-14274519 [email protected] #1
Basisband: G930FFXXU7CRH2
Android 8.0.0
Samsung Experience: 9.0
I would like to flash the latest firmware and i want to use the phone in germany. Can somebody identify the correct firmware?
Thanks a lot
What does the phone say in download mode? The ROM can be modified to lie about the model and firmware, but download mode will tell you the truth.
If download mode says it's a G930F then it's Exynos, if it says G930U/V/T/A then it's Snapdragon.
If it is a G930F then good news is you can just flash whatever G930F firmware you want over top what's on it. If it's Snapdragon then you're a bit stuffed, you can't flash Exynos firmware onto Snapdragon.
For updating it if it is G930F my recommendation would be to find out the region code for your device, e.g. from here https://updato.com/firmware-archive...act=1&r=DBT,XEG,DCO,DDE,VIA,DTM,VD2&v=&rpp=15 then download the firmware using that region code with SamFirm tool https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Download Mode says SM-G930V
I'm doomed
Yep that's a common scam. If you can't return to seller the next best thing would be to flash the G930U firmware, which is the generic unlocked firmware for Snapdragon.
It won't give you the equivalent experience, but it will remove any bloat and give you a carrier unlocked phone experience.
You can use the same methods I mentioned to get your hands on the latest G930U firmware and update the device, but you may need this specific Odin version to flash G930U over G930V https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Thanks. Does TMK, TFN, TMB,... make a difference when the phone is used in germany?
Should i flash all 5 files:?:
AP
BL
CP
CSC
Home
I tried and my result is: Flashing only AP was not enough. Flashing all 5 worked fine for me. I chose TMK and even LTE is working. Thanks a lot.
Glad its working, for reference CSC and Home_CSC are both CSC files and you usually pick just one. Home_CSC doesn't do a data wipe, CSC does.
But when changing from G930V to G930U it's always safest to do the CSC wipe.