Database Info

[OFFICIAL] TWRP 3 for Samsung Galaxy Core Plus (SM-G350)

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM/PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS
*/
Introduction
This is TWRP 3 for the Samsung Galaxy Core Plus (SM-G350) aka cs02
This should be ready to use!
Changelog
22-10-2017:
There is now an official TWRP available on the TeamWin page:
The unofficial thread and files will be kept in case anyone wants to rollback.
You ARE ALLOWED to report stuff about the official builds as well as the unofficial builds here.
22-05-2017:
TWRP 3.1.1-0 upstream changes
Kernel is now built with arm-eabi-4.8 (Commits)
This is now built from TeamWin's official sources, until we get official builds (New source is here)
28-04-2017:
Fixed SELinux (fixed magically, so I can't present a commit. May have been fixed since the last build, but didn't work until now)
09-04-2017:
TWRP 3.1.0-0 upstream changes
Fixed wiping partitions (commit)
24-11-2016:
Set the Setting for doing "rm -rf" instead of formatting as default (commit)
21-11-2016:
Bringup
Installation Instructions
Requirements
A computer with Administrator/root privileges
A network connection
Your phone charged to at least 50%
Instructions for Windows
Download Samsung's ODIN and the .tar image from the 'Downloads' section
Extract ODIN and open it using your Administrator privileges
Add the .tar file into the 'AP' field
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Press 'Start' and wait until it shows 'PASS'
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots
Instructions for macOS/Linux
Install Heimdall through homebrew/[your package manager]/compiling
Download the .img file from the 'Downloads' section
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Open your terminal and execute the following command:
Code:
heimdall flash --RECOVERY twrp-cs02-x.x.x-x-xxxxxxxx.img
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots
Downloads
Samsung USB Drivers
Odin v3.09
Odin v3.11.1
twrp-cs02-3.1.1-0-20170512.tar
twrp-cs02-3.1.1-0-20170512.img
Thanks To/Credits
Thanks to @santeri3700 and @berkantkz for teaching me the basics of ROM Development and helping me with Errors
XDA:DevDB Information
TWRP 3 for Samsung Galaxy Core Plus (SM-G350), Tool/Utility for all devices (see above for details)
Contributors
TimSchumi
Source Code: https://github.com/TeamWin?q=cs02
Version Information
Status: Stable
Current Stable Version: 3.1.1-0
Stable Release Date: 2017-05-12
Created 2016-11-21
Last Updated 2020-09-13

Quick Update:
I now know what is causing the issues with non-block-based zip files. The Recovery does not have SELinux support by now, which would provide the metadata command it is complaining about. I will try to add in SELinux support and then release TWRP 3.1.0-0 with full flashing capability

It seems that I have the wiping gotten to work. Only SELinux remaining and I could make it official
Probably a new build will come?
EDIT: New build of TWRP 3.1.0-0 with fixed wiping is up!

is it flashable with rashr?
edit: yes it is.

A working build of TWRP is now available on the TeamWin Download Page (https://twrp.me/samsung/samsunggalaxycoreplus.html). I'll keep the old TWRP images here so you can revert if you experience any problems. I'll sooner or later mark this thread as official, too.
Note: You are allowed to report bugs or anything else about the unofficial images as well as the official images in this thread (Because I don't want to maintain a seperate thread).

TimSchumi said:
A working build of TWRP is now available on the TeamWin Download Page (https://twrp.me/samsung/samsunggalaxycoreplus.html). I'll keep the old TWRP images here so you can revert if you experience any problems. I'll sooner or later mark this thread as official, too.
Note: You are allowed to report bugs or anything else about the unofficial images as well as the official images in this thread (Because I don't want to maintain a seperate thread).
Click to expand...
Click to collapse
Thanks.

After flashing twrp.tar, only the original recovery is started.
What to do?

Grigori88 said:
After flashing twrp.tar, only the original recovery is started.
What to do?
Click to expand...
Click to collapse
Did you boot into the stock ROM after flashing TWRP? If yes, it was overwritten again because of that. You have to instantly reboot into recovery after flashing

It does not work for me, I do not know what happens
TimSchumi said:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM/PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS
*/
Introduction
This is TWRP 3 for the Samsung Galaxy Core Plus (SM-G350) aka cs02
This should be ready to use!
Changelog
22-10-2017:
There is now an official TWRP available on the TeamWin page:
The unofficial thread and files will be kept in case anyone wants to rollback.
You ARE ALLOWED to report stuff about the official builds as well as the unofficial builds here.
22-05-2017:
TWRP 3.1.1-0 upstream changes
Kernel is now built with arm-eabi-4.8 (Commits)
This is now built from TeamWin's official sources, until we get official builds (New source is here)
28-04-2017:
Fixed SELinux (fixed magically, so I can't present a commit. May have been fixed since the last build, but didn't work until now)
09-04-2017:
TWRP 3.1.0-0 upstream changes
Fixed wiping partitions (commit)
24-11-2016:
Set the Setting for doing "rm -rf" instead of formatting as default (commit)
21-11-2016:
Bringup
Installation Instructions
Requirements
A computer with Administrator/root privileges
A network connection
Your phone charged to at least 50%
Instructions for Windows
Download Samsung's ODIN and the .tar image from the 'Downloads' section
Extract ODIN and open it using your Administrator privileges
Add the .tar file into the 'AP' field
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Press 'Start' and wait until it shows 'PASS'
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots
Instructions for macOS/Linux
Install Heimdall through homebrew/[your package manager]/compiling
Download the .img file from the 'Downloads' section
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Open your terminal and execute the following command:
Code:
heimdall flash --RECOVERY twrp-cs02-x.x.x-x-xxxxxxxx.img
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots
Downloads
Samsung USB Drivers
Odin v3.09
Odin v3.11.1
twrp-cs02-3.1.1-0-20170512.tar (Primary, Mirror)
twrp-cs02-3.1.1-0-20170512.img (Primary, Mirror)
Thanks To/Credits
Thanks to @santeri3700 and @berkantkz for teaching me the basics of ROM Development and helping me with Errors
XDA:DevDB Information
TWRP 3 for Samsung Galaxy Core Plus (SM-G350), Tool/Utility for all devices (see above for details)
Contributors
TimSchumi
Source Code: https://github.com/TeamWin?q=cs02
Version Information
Status: Stable
Current Stable Version: 3.1.1-0
Stable Release Date: 2017-05-12
Created 2016-11-21
Last Updated 2018-03-26
Click to expand...
Click to collapse
When I perform the steps, load but give error, look:
Code:
heimdall flash --RECOVERY twrp-cs02-3.1.1-0-20170512.imgHeimdall v1.4.1
Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
ERROR: Failed to receive PIT file part #16!
ERROR: Failed to download PIT file!
Ending session...
Rebooting device...
ERROR: Failed to receive reboot confirmation!
Releasing device interface...

Nasher_87-ARG- said:
Introduction
This is TWRP 3 for the Samsung Galaxy Core Plus (SM-G350) aka cs02
This should be ready to use!
Changelog
22-10-2017:
There is now an official TWRP available on the TeamWin page:
The unofficial thread and files will be kept in case anyone wants to rollback.
You ARE ALLOWED to report stuff about the official builds as well as the unofficial builds here.
22-05-2017:
TWRP 3.1.1-0 upstream changes
Kernel is now built with arm-eabi-4.8 (Commits)
This is now built from TeamWin's official sources, until we get official builds (New source is here)
28-04-2017:
Fixed SELinux (fixed magically, so I can't present a commit. May have been fixed since the last build, but didn't work until now)
09-04-2017:
TWRP 3.1.0-0 upstream changes
Fixed wiping partitions (commit)
24-11-2016:
Set the Setting for doing "rm -rf" instead of formatting as default (commit)
21-11-2016:
Bringup
Installation Instructions
Requirements
A computer with Administrator/root privileges
A network connection
Your phone charged to at least 50%
Instructions for Windows
Download Samsung's ODIN and the .tar image from the 'Downloads' section
Extract ODIN and open it using your Administrator privileges
Add the .tar file into the 'AP' field
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Press 'Start' and wait until it shows 'PASS'
If you are on the stock OS, immeadiately reboot into the recovery by holding [Vol+] and [Home] while the device reboots
Instructions for macOS/Linux
Install Heimdall through homebrew/[your package manager]/compiling
Download the .img file from the 'Downloads' section
Put your device into Download mode by holding [Vol-] and [Home] while powering on the device
Confirm the prompt on the display by pressing [Vol+] once
Connect your phone to your computer
Open your terminal and execute the following command:
When I perform the steps, load but give error, look:
Click to expand...
Click to collapse
1. Try a newer version of Heimdall
2. Checked the cable? Maybe try a different one.
3. Run Heimdall as administrator/root.

Thanks Tim
TimSchumi said:
1. Try a newer version of Heimdall
2. Checked the cable? Maybe try a different one.
3. Run Heimdall as administrator/root.
Click to expand...
Click to collapse
Perfect, I try. :good:
Heimdall is 1.4.1 version. Its ok, i think
The cable is new, no too new new but are you work to transfer data. Buy other

My too
Nasher_87-ARG- said:
Perfect, I try. :good:
Heimdall is 1.4.1 version. Its ok, i think
The cable is new, no too new new but are you work to transfer data. Buy other
Click to expand...
Click to collapse
I don't know what happens, same PIT problem

[TWRP][OFFICIAL] TWRP 3.3.0-0 for UMIDIGI F1 Play [MT6771]

This TWRP Recovery Is Compiled From Source & Officially Supported
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Page: https://twrp.me/oukitel/umidigif1playhtml
Unofficial GitHub Release : Here (release name : TWRP-OUKITEL-WP1)
Version Information
ROM OS Version: 8.1 Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel

Does anyone knows if this can be installed on the "normal" F1 (not the F1 Play)?

If I unpack this and swap kernel for the F1 can I post it in F1 thread to share. Or can the f1 be added as a build branch?
EDIT:
Well it boots, but does not have working MTP.
the one i have been using already(a ported one) has working MTP, I will stay with it.

chankruze said:
This TWRP Recovery Is Compiled From Source & Officially Supported
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Page: https://twrp.me/oukitel/umidigif1playhtml
Unofficial GitHub Release : Here (release name : TWRP-OUKITEL-WP1)
Version Information
ROM OS Version: 8.1 Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel
Click to expand...
Click to collapse
for UMIDIGI F1 will it ?

Is the BL unlockable with just the old fasboot bl unlock commands? It's a little hard to find info on this thing. Must not be very popular yet.

Does this work on Android 9.0

#Starlord37# said:
Does this work on Android 9.0
Click to expand...
Click to collapse
This is for F1 play (which is 9.0 out of the box)

BZ0RG said:
This is for F1 play (which is 9.0 out of the box)
Click to expand...
Click to collapse
Ok I was wondering because it said android 8.1

@Starlord37 The last official release works well too (available at twrp website)

Just owned my F1 play.
Soon I will make my rom for it
Gesendet von meinem F1 mit Tapatalk

[RECOVERY][OFFICIAL] TWRP 3.3.x for Ulefone Armor 6

This TWRP recovery Is compiled from source & will be supported officially soon
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this project
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. Not tested yet
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery image and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then use your device key combo to boot into TWRP recovery mode.
Enjoy !
Downloads
Android File Host: https://www.androidfilehost.com/?w=files&flid=296748
Official TWRP Page: Yet to submit
Contributors
chankruze
Source Code: https://github.com/N00bTree/android_device_ulefone_Armor_6
Version Information
Status: stable

Thank you! I can confirm this also works on the Armor 6E.

i have been able to flash it but its pretty useless as i cant decrypt it and no other options show up

mentalik said:
i have been able to flash it but its pretty useless as i cant decrypt it and no other options show up
Click to expand...
Click to collapse
I had same problem, I flashed https://androidfilehost.com/?fid=6006931924117895653 and formatted internal data.

thanks that solved it for me

jonezy82 said:
I had same problem, I flashed https androidfilehost.com ?fid=6006931924117895653 and formatted internal data.
Click to expand...
Click to collapse
How do i even flash that? twrp is refusing to let me do anything.

Yoosk said:
How do i even flash that? twrp is refusing to let me do anything.
Click to expand...
Click to collapse
EDIT: Have you tried to select "cancel" when you get into twrp?
You can get past of decryption by selecting "cancel".
You need to format your internal storage, then flash that .zip from usb-otg usbstick.
FYI: I got my phone screwed once, I just flashed stock firmware with sp_flash_tool and it formatted storage for me.

[RECOVERY] TWRP 3.3.x for Realme U1

This TWRP Recovery Is Compiled From Source & Wii Be Suupported Officially
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off, after that use your device key combo to boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Page: coming soon !
Unofficial Release : https://www.androidfilehost.com/?w=files&flid=298136
Version Information
ROM OS Version: 8.1 Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel

[ABANDONED] - [recovery]Unofficial TWRP for G9 PLUS (ODESSA)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- sdcard
- Decryption works
- Otg works
- F2FS support
- Fastboot boot command support
- Fastbootd
Not working:
- backups
- other?, you tell me
DANGER:
- NO SLOT CHANGER (BRICK DEVICE)
Download:
UPDATE 01-03-2023
This project it abandoned , I don't have the phone to continue the development
last android supported it A11 not flash on 12+ and
(stableR.25) (LAST) (finally for end support support a11-)
(stableR.21)(old)
To Flash the TWRP:
INSTALL RECOVERY (PERM INSTALL)
Code:
fastboot flash recovery twrp.img
BOOT RECOVERY (TEMP BOOT)
Code:
fastboot boot recovery twrp.img
Reccomended ADB and Fastboot binaries (FOR MOTOROLA DEVICES):
TinyFastbootScript
Source code:
https://github.com/Teamwin/android_bootable_recovery
https://github.com/Moto-tree-folders
COFFE:
Paypal

BETAR (R) = BETA
=============================================
=============== CHANGELOG ================
=============================================
UPDATE 01-03-2023
This project it abandoned , I don't have the phone to continue the development
stable r.25
update TWRP source to 3.5.1-r10.0 (source for dynamic)
stable r.21
- fix touch for ft8756 display
- improve partitions
fix backups and rework dt
- reduce 67mb to 35mb recovery
stable r1 (final betar )
- fix Decryption
betar 18 ()
- fix sdcard
- Decryption don't works (break for now)
betar 17 (private)
- private build
betar 16
- update source code to TWRP 3.5.0_10 (build with - - -OMNI/AOSP 10)
betar 15
: build fastbootD (install work c
touch work in nova display

===============================================
============= TOUCH NO WORK?? ===============
===============================================
report you display
USE:
adb shell
ls /sys/class/touchscreen
and send me you display name in telegram

I thought it was a personalized recovery alternative! I'm still expecting. :confuso: :confuso:

ramasterdev said:
I thought it was a personalized recovery alternative! I'm still expecting. :confuso: :confuso:
Click to expand...
Click to collapse
yep , twrp is custom recovery

Thank you Sebastian for your efforts.
I tried this TWRP by "fastboot boot recovery.img" without flashing it.
Because I'm rooted I checked my sys/class/touchscreen to see if I had a novatek screen.
NVT-ts
Novatek_ts
Thanks for confirming that this was the correct screen Sebastian!

sebastian3567HD said:
Reserved
changenlog:
beta 15
: build fastbootD (install work c
touch work in nova display
no work touch report you display
adb shell
ls /sys/class/touchscreen
and send me you display name
telegram https://t.me/seba_3567
Click to expand...
Click to collapse
My display is ft8756
Thanks

ReneZeiss said:
View attachment 5153427
Click to expand...
Click to collapse
work

Kikowtf said:
My display is ft8756
Thanks
Click to expand...
Click to collapse
I'm still working to put that screen to work!

ReneZeiss said:
Thank you Sebastian for your efforts.
I tried this TWRP by "fastboot boot recovery.img" without flashing it.
Because I'm rooted I checked my sys/class/touchscreen to see if I had a novatek screen.
NVT-ts
Novatek_ts
Thanks for confirming that this was the correct screen Sebastian!
Click to expand...
Click to collapse
test in NVT-ts (work) (use fastboot boot recovery.img for test you display )

Hi Sebastian,
I also have a new Moto G9 Plus and the touchscreen is ft8756. I've tried various TWRP images with the same result; unable to enter anything on the touchscreen.
I understand from the posts that you are still working on this touchscreen.

I have searched Google and the forums and cannot find a feasible answer. I am unable to create a full backup on internal or external storage due to the error seen in the screenshot (it gets stuck in the same position with the same error on both storages). Can someone point me in the right direction or assist me in rectifying the issue? Thanks in advance.

Have new g9 plus and after recovery flash end up in bootloop TWRP can't control because touch screen not working.... 200€ bye bye.....
Waiting for new Odessa file

hampik said:
Have new g9 plus and after recovery flash end up in bootloop TWRP can't control because touch screen not working.... 200€ bye bye.....
Waiting for new Odessa file
Click to expand...
Click to collapse
turn the phone off, boot into fastboot, and flash the stock image (you'll have to search for how to flash stock image on this phone), and see if that will fix the issue

Not-working touch screen I'm bypass this issue
by using PC mouse put USB receiver in phone trough USB-c to USB from Samsung box
now I'm root with new type of display

+1 touchscreen ft8756, is it possible to use it with other twrp?

Miha1l said:
+1 touchscreen ft8756, is it possible to use it with other twrp?
Click to expand...
Click to collapse
Here's a link to a tested working copy of TWRP for Odessa: https://www.androidfilehost.com/?fid=17248734326145738599

A working copy of TWRP 3.5.0 that works with ft8756 touchscreen. I have personally tested it - https://www.androidfilehost.com/?fid=17248734326145738599

hampik said:
Have new g9 plus and after recovery flash end up in bootloop TWRP can't control because touch screen not working.... 200€ bye bye.....
Waiting for new Odessa file
Click to expand...
Click to collapse
can you explain that better?

hampik said:
Not-working touch screen I'm bypass this issue
by using PC mouse put USB receiver in phone trough USB-c to USB from Samsung box
now I'm root with new type of display
Click to expand...
Click to collapse
can you give me information about your problem?