I'll start by apologizing if this has been solved elsewhere I have searched but found no answers.
I have the global variant and was rooted with twrp. I wanted the ota update so I unrooted and updated. Today I had some time so I flashed twrp wiped and entered bootloop. I attempted a full factory reset through twrp but still bootlooped. I have fastboot rom and have attempted to use miflash to fix it but get the "cannot found lock.bat" error though when first starting miflash I get the "can't find flash script" error. The drivers are properly installed yet the error persists. I cannot get adb to sideload which is, I'm guessing because of the wipe removing debugging mode? Is there any way to get the ROM image to the phone(I tried adb push command but says no device. Yet flashing recovery works so I know it's connected and recognized) so I can flash it via TWRP or the stock recovery img to flash and work from there? I'm kind of at a loss here. Am I now the proud owner of a very neat paper weight? I seriously hope not as I'm not exactly made of money and I've only owned the phone for a couple months.
Any and all help is greatly appreciated.
Update
I have managed to get adb push to start sending global v10.2.2.0 to the root folder. I'm hoping this will allow me to flash from twrp.
Mota420 said:
I'll start by apologizing if this has been solved elsewhere I have searched but found no answers.
I have the global variant and was rooted with twrp. I wanted the ota update so I unrooted and updated. Today I had some time so I flashed twrp wiped and entered bootloop. I attempted a full factory reset through twrp but still bootlooped. I have fastboot rom and have attempted to use miflash to fix it but get the "cannot found lock.bat" error though when first starting miflash I get the "can't find flash script" error. The drivers are properly installed yet the error persists. I cannot get adb to sideload which is, I'm guessing because of the wipe removing debugging mode? Is there any way to get the ROM image to the phone(I tried adb push command but says no device. Yet flashing recovery works so I know it's connected and recognized) so I can flash it via TWRP or the stock recovery img to flash and work from there? I'm kind of at a loss here. Am I now the proud owner of a very neat paper weight? I seriously hope not as I'm not exactly made of money and I've only owned the phone for a couple months.
Any and all help is greatly appreciated.
Click to expand...
Click to collapse
Update 2 phone working but still confused.
Pushing the ROM via ADB did indeed allow me to flash from twrp and restore the phone. My question now is why did it happen? Is the new OTA MIUI 10.3... update incompatible with twrp or did something anomalous happen with the flash? I flashed exactly the same method I used with the 10.2.2 ROM a few weeks ago....
OTA's should only be used when completely stock! Even though you uninstalled root, there were still system modifications that more than likely caused your issues. The fastboot version of the firmware is different than the TWRP image. You can not flash a TWRP image via fastboot, hence the missing scripts and bat files. If you had actually downloaded the fastboot image, you would have had a flash_all.bat file that would have returned your device completely to stock with a single run of that file.
Thanks for the reply and information. I actually expected my issues to begin upon installing the ota update and was quite surprised that it updated without error. What confuses me is how flashing twrp after the update caused the issues. I went through the normal process when flashing twrp and still ended up bootlooped. I made the mistake of thinking boot.img was the old stock recovery i renamed when i first rooted and flashing that as recovery. Obviously this was not the recovery file but fastboot. It was then that panic mode kicked in and things went from bad to worse. I formatted planning to flash the stock rom via adb which didn't work. Given that I never touched the fastboot image on the phone I'm confused on how the bat files and scripts weren't found.
I'll admit I'm not extremely well versed in this area.
Is it possible that the ota update contained different bat files and scripts than the previous rom had? Which would cause miflash to not recognize them when attempting to flash an older rom? I'm sorry if my questions are ignorant lol. I'm a process guy and a troubleshooter by nature which means even though I've resolved the issue, I need to figure out what caused it.
Would flashing fastboot to the phone as the recovery image have screwed up the bat and scripts? Having two instances of boot.img on the partition messed it up maybe? Was it the formatting even though I was still able to boot into fastboot after? Or was it something that happened during the unrooting and updating that messed it up and it didn't manifest until I flashed twrp? Like I said the update worked fine and the phone was fully functional until I tried to reroot.
Thanks again for taking the time to help. It's definitely appreciated.
Mota420 said:
Thanks for the reply and information. I actually expected my issues to begin upon installing the ota update and was quite surprised that it updated without error. What confuses me is how flashing twrp after the update caused the issues. I went through the normal process when flashing twrp and still ended up bootlooped. I made the mistake of thinking boot.img was the old stock recovery i renamed when i first rooted and flashing that as recovery. Obviously this was not the recovery file but fastboot. It was then that panic mode kicked in and things went from bad to worse. I formatted planning to flash the stock rom via adb which didn't work. Given that I never touched the fastboot image on the phone I'm confused on how the bat files and scripts weren't found.
I'll admit I'm not extremely well versed in this area.
Is it possible that the ota update contained different bat files and scripts than the previous rom had? Which would cause miflash to not recognize them when attempting to flash an older rom? I'm sorry if my questions are ignorant lol. I'm a process guy and a troubleshooter by nature which means even though I've resolved the issue, I need to figure out what caused it.
Would flashing fastboot to the phone as the recovery image have screwed up the bat and scripts? Having two instances of boot.img on the partition messed it up maybe? Was it the formatting even though I was still able to boot into fastboot after? Or was it something that happened during the unrooting and updating that messed it up and it didn't manifest until I flashed twrp? Like I said the update worked fine and the phone was fully functional until I tried to reroot.
Thanks again for taking the time to help. It's definitely appreciated.
Click to expand...
Click to collapse
OTA's are not a complete image. It is a partial update that only replaces what it has to replace. If MiFlash dis not recognize the image, it was either the wrong image or a corrupt image.
Sometimes updates to the system and recovery partitions fix exploits that things like root and TWRP take advantage of.
Fastboot isn't something you flash to the phone. It is a command line used to flash a dull factory image to the device properly. You do not need MiFlash to flash a fastboot factory image. All you do is extract the full image to your ADB folder unless it is system wide, boot your device into the bootloader, connect ir to your PC, and run the flash_all.bat command contained in the folder you extracted. A command prompt window will open, everything will complete after about a few minutes the window will close, and your phone will reboot.
So the "fastboot" rom is a rom designed to be flashed using fastboot? The miflash error was given because the rom I was trying to flash was corrupted. That makes sense as I'd never known of a fastboot rom before. But it has been a few years since I rooted and romd my phone. I always did the typical flash from the rom image from twrp. I'm still not sure how I got myself in a boot loop unless when I wiped after flashing twrp I accidentally selected another option that erased more than I wanted.. Which makes perfect sense. I knew it had to be an ID10T error lol.
Thanks for the explanation.
Related
Hi.
Has any one been able to flash custom recovery after installing OTA and upgrading to 23.72-47?
I upgraded to stock version 23.72-47 via the OTA update way. And after that I tried using the fastboot method to flash twrp in bootloader mode. The command is execuded successfully but rebootin to recovery opens the stock recovery and not twrp. Any one was successful in flashing twrp after OTA update?
arunhebbare said:
Hi.
Has any one been able to flash custom recovery after installing OTA and upgrading to 23.72-47?
I upgraded to stock version 23.72-47 via the OTA update way. And after that I tried using the fastboot method to flash twrp in bootloader mode. The command is execuded successfully but rebootin to recovery opens the stock recovery and not twrp. Any one was successful in flashing twrp after OTA update?
Click to expand...
Click to collapse
Just for the heck of it, have you tried just booting into TWRP instead of permanently installing, to see if TWRP will even load ok?
No. Will try.....
Aaaaah, yes. Now I recall why I was wondering the first time I tried to root the fastboot command was 'fastboot boot recovery recovery.img'.
I still wonder why the flash command does not work.. There is a clear 'OKAY' indicating successful flashing of the recovery. It surprises me as to where the recovery was flashed or written (if I have understood flashing correctly).
arunhebbare said:
No. Will try.....
Aaaaah, yes. Now I recall why I was wondering the first time I tried to root the fastboot command was 'fastboot boot recovery recovery.img'.
I still wonder why the flash command does not work.. There is a clear 'OKAY' indicating successful flashing of the recovery. It surprises me as to where the recovery was flashed or written (if I have understood flashing correctly).
Click to expand...
Click to collapse
I had no problems flashing TWRP with "flash" command afterwards. My notes... http://forum.xda-developers.com/2015-moto-g/general/manual-ota-update-process-step-step-t3206049
Boot command worked
As an update I tried the fastboot boot recovery.img command and I could reboot and adb reboot onto twrp recovery mode. But when resorting to the volume button mode to recovery I again was presented with stock recovery.
I tried using the fastboot flash recovery command and it seems to have done the job. Now I am able to reboot to twrp recovery using both software and hardware ways.
What still bugs me is that why did not the flash commands work?
Any insight into this will help me understand the nuances of differences between booton and flashing o I have misunderstood them.
fastboot boot recovery.img=boot into recovery once
fastboot flash recovery=flash it permanently
Sent from my Nexus 6 using Tapatalk
Thank you, so what I too understood is correct then.
Bear with me but my question is, why the command of flashing the recovery did not work first time despite of the fact that the fastboot command terminal showed "OKAY"?
It worked when I used the boot command to flash and I could root it after that. But after booting and rooting, I was presented with the stock rom subsequently.
So, I used the flash recovery command this time around and it worked to lodge the recovery in place.
Not able to understand why the flash command did not work first time.
Appreciate any clarification or explanation
arunhebbare said:
Thank you, so what I too understood is correct then.
Bear with me but my question is, why the command of flashing the recovery did not work first time despite of the fact that the fastboot command terminal showed "OKAY"?
It worked when I used the boot command to flash and I could root it after that. But after booting and rooting, I was presented with the stock rom subsequently.
So, I used the flash recovery command this time around and it worked to lodge the recovery in place.
Not able to understand why the flash command did not work first time.
Appreciate any clarification or explanation
Click to expand...
Click to collapse
I don't know if it's same in Moto devices too or not but in Samsung there's a file named installrecovery.sh which replaces custom recoveries with stock on boot.
But once the device has been rooted it can be stopped from doing so.
Maybe this same thing happend with you.
Again this is just mere assumption keeping a samsung device in mind and may be completely wrong logic.
Sent from my SM-A800F using XDA Free mobile app
arunhebbare said:
Thank you, so what I too understood is correct then.
Bear with me but my question is, why the command of flashing the recovery did not work first time despite of the fact that the fastboot command terminal showed "OKAY"?
It worked when I used the boot command to flash and I could root it after that. But after booting and rooting, I was presented with the stock rom subsequently.
So, I used the flash recovery command this time around and it worked to lodge the recovery in place.
Not able to understand why the flash command did not work first time.
Appreciate any clarification or explanation
Click to expand...
Click to collapse
Try using a new usb cable. I have no idea WTF motorola was thinking, including that god-awful charger without a detachable usb. I've seen this problem happen several times, though. When the cable goes bad but still has the actual connection it may not transfer data properly...but since it's connected fastboot doesn't know the file never actually transferred so it reports that it's done.
I bought a 6-pack of Tronsmart USB cables from amazon for $10, and they're absolutely amazing!!! They're made with 20-gauge wires, which are far thicker than those that will come with the phone, no matter what OEM it's from. Fat cable means fast transfer speeds and a longer life, since it will take longer to fray due to its heft.
*** the deal I got is actually back. Last time it only lasted a day, so if you want it, I'd recommend hurrying!!
http://www.amazon.com/Tronsmart-Cha...YYK0/ref=sr_1_7?ie=UTF8&qid=1442849948&sr=8-7
So I got a pixel recently. I unlocked the bootloader, installed TWRP, and rooted it. However, it's been a few years since I had an unlocked and rooted phone so I forgot that the OTA updates can't be applied. So I decided to go back to the factory image. A quick google search lead me to an article where they said I could select the Full Unroot option in the settings of SuperSU and it would attempt to restore the stock boot image and recovery image. So I did that, and ended up in a boot loop.
Well, then I decided to try flashing the entire factory images from google, using the flash-all.bat file they provide. It seems to flash the bootloader and the radio fine, but when it comes to the part where it flashes everything in the "image-sailfish-nde63l.zip" (I picked this build because it was the one I was on when the pixel arrived) folder it says "Error: failed to load 'image-sailfish-nde63l.zip': not enough space."
I can still get to the TWRP recovery, and I can get to the bootloader, but currently nothing else seems to work. Please, can anyone help me?
UPDATE: The issue was outdated adb and fastboot. I had 1.0.32, once I had the latest versions (1.0.36 right now) I could fix everything.
UPDATE: So I extracted boot and system from the zip file and manually flashed those. It boots now, but when it does it says there are errors with the device and to contact the manufacturer, also a lot of dialog boxes pop up saying various processes have stopped.
I think that if I manually flash the rest of the contents of the zip folder it will work, but there are a lot of files and I'm not sure which partition to flash them too, or which one's are needed. Does anyone know how to manually do what the flash-all.bat script does? Flashing bootloader, radio, system, and boot are not enough it seems. If you read the script it's just doing a 'fastboot -w update' on the zip file.
I hope what I'm saying makes sense. Thanks.
Did you try flashing the stock boot.img to both slots before going back to stock?
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
This is what chainfire recommended in his supersu post when he was talking about flashing twrp. Maybe try doing that and then try using the flashall script. Also make sure your download is not corrupt or something. https://plus.google.com/+Chainfire/posts/CBL8pnKtA8F
Evo_Shift said:
Did you try flashing the stock boot.img to both partitions before going back to stock?
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
This is what chainfire recommended in his supersu post when he was talking about flashing twrp. Maybe try doing that and then try using the flashall script. Also make sure you download is not corrupt or something.
Click to expand...
Click to collapse
No, I didn't do any flashing myself before going back to stock. I selected the "Full unroot" option in SuperSU, based on the first result when googling "unroot pixel".
As soon as I did that I was stuck in a bootloop and I tried to restore the factory images according to the google webpage, but that's when I get the error.
Doing what you said doesn't work either, not even redownloading the image.
Actually, now it's worse. When I select recovery from fastboot menu it shows "No command" with a broken android. So twrp is gone now too.
If anyone can help me at all, that would be amazing, thanks.
UPDATE: So I extracted boot and system from the zip file and manually flashed those. It boots now, but when it does it says there are errors with the device and to contact the manufacturer, also a lot of dialog boxes pop up saying various processes have stopped.
I think that if I manually flash the rest of the contents of the zip folder it will work, but there are a lot of files and I'm not sure which partition to flash them too, or which one's are needed. Does anyone know how to manually do what the flash-all.bat script does? Flashing bootloader, radio, system, and boot are not enough it seems. If you read the script it's just doing a 'fastboot -w update' on the zip file.
I hope what I'm saying makes sense. Thanks.
th3p3r50n said:
Actually, now it's worse. When I select recovery from fastboot menu it shows "No command" with a broken android. So twrp is gone now too.
If anyone can help me at all, that would be amazing, thanks.
Click to expand...
Click to collapse
This happened to me too. That's my current situation. Have adb and fastboot still but can't figure out what steps to fix it.
I think you should focus on why the flash all didn't work. Do you have the latest fastboot? Did you check the md5 of the downloaded rom image? What OS it's your computer running?
How do we verify latest fastboot. I thought that was my issue but don't see where this can be found. I have latest minimal adb and fastboot installed.
fracman said:
How do we verify latest fastboot. I thought that was my issue but don't see where this can be found. I have latest minimal adb and fastboot installed.
Click to expand...
Click to collapse
The commands <adb version> and <fastboot --version> seem to return version numbers. My setup returns:
Android Debug Bridge version 1.0.36
Revision fd9e4d07b0f5-android
and
fastboot version fd9e4d07b0f5-android
respectively
Thank you cntryby429. I assumed I was using the latest versions because I had just installed them through the SDK Manager, turns out I was using version 1.0.32. I found the latest version of Minimal ADB and Fastboot and the flash-all script worked fine. I still had a few issues though, so I did a factory reset and then ran the flash-all script again. Now everything works perfectly again. Thanks so much!
Hi all,
I'm after some help with a 1st gen Moto G. It belonged to my mother, and was happily running CM for years before dying on her one day. She posted it back to me months ago...I failed to fix it then, and I'm not having much luck this time either.
It sits on the bootloader ok, and I can fastboot interact with it, but although attempts to revert to stock, or update TWRP etc look like they've worked, nothing ever changes. It's as if its storage has gone read-only.
CM is still there, but bootloops 9 times out of 10. Occasionally it'll start properly, before rebooting seconds later, probably because it can't write anything and it crashes out.
I can however, boot (not flash) the latest TWRP and play around with that, but even simple file operations like trying to delete anything fails ("process ended with ERROR 1"). I've tried clearing, factory resetting, reformatting, etc, but nothing has an effect. CM and the old files are all still there.
I don't need this phone, nor the files on it - it'll go in the trash if it can't be fixed - so not worried about damaging it any way in an attempt to revive it
Thanks
Everything you describe suggests Emmc corruption. Threads are created about it regularly. It's an issue that can effect any android phone, and while age could be the key factor - my launch-day Falcon has never had an issue. There is no cure.
However, try the below just in case I am wrong.
Flash the latest Factory Firmware Image for your model using mFastboot. If this is not successful, it would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
mFastboot download: https://www.androidfilehost.com/?fid=24052804347778493
Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
lost101 said:
Everything you describe suggests Emmc corruption.
Click to expand...
Click to collapse
Ah, interesting. It's not something I've come across before, so it's good to at least know what's (probably) wrong with it.
lost101 said:
However, try the below just in case I am wrong.
Flash the latest Factory Firmware Image for your model using mFastboot. If this is not successful, it would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
Click to expand...
Click to collapse
Not sure if this was the best way, but I booted TWRP and attempted to install via ADB sideload (couldn't think of any other way to get the zip across).
fastboot transfered about 26% of the file before exiting.
TWRP reported:
Code:
installing zip file '/sideload/pacakge.zip'
>>> XT1032 Retail Europe 5.1 (Untouched) <<<
Installing Android
Please wait...
symlink: no of symlinks failed = 1
Updater process ended with ERROR: 7
imilne said:
Not sure if this was the best way, but I booted TWRP and attempted to install via ADB sideload (couldn't think of any other way to get the zip across).
Click to expand...
Click to collapse
Do as I instructed to remove all doubt of Emmc corruption.
Own the OPP6; Rooted, on OxygenOS 5.18.
Went to install the newest TWRP (was going to install XXX no limits), when asked where to install it to, accidentally, without thinking, hit install to Boot.
Problems.
I can get into fastboot, the PC sees the phone in fastboot.
Have tried to flash a recovery image and similar, got an error saying: FAILED (remote: (recovery_b) No such partition).
Just want to get the phone booting again, wipe the whole thing start over, from fastboot.
Any help appreciated.
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Thank you, the tool worked like a charm.
BTW: I did search and find other "methods" but none of them worked
noncomjd said:
Own the OPP6; Rooted, on OxygenOS 5.18.
Went to install the newest TWRP (was going to install XXX no limits), when asked where to install it to, accidentally, without thinking, hit install to Boot.
Problems.
I can get into fastboot, the PC sees the phone in fastboot.
Have tried to flash a recovery image and similar, got an error saying: FAILED (remote: (recovery_b) No such partition).
Just want to get the phone booting again, wipe the whole thing start over, from fastboot.
Any help appreciated.
Click to expand...
Click to collapse
What you should have done was fastboot boot twrp.img. which would start twrp, then you could have used the installer in to install twrp on phone. After that you would have to installed stock or custom kernel.
MrSteelX said:
What you should have done was fastboot boot twrp.img. which would start twrp, then you could have used the installer in to install twrp on phone. After that you would have to installed stock or custom kernel.
Click to expand...
Click to collapse
That is exactly what I wanted to do.
I could get into TWRP, but I couldn't see the phone on the PC and couldn't move files (ROM) to the phone (although fastboot was working and I could see the device using adb) but I couldn't figure out how to have TWRP look for or find the ROM on the PC.
There's no recovery partition on A/B phones remember.
RusherDude said:
There's no recovery partition on A/B phones remember.
Click to expand...
Click to collapse
Thanks for that. and that explains a few things and explains why when I installed TWRP, I didn't see the recovery option. Doesn't pardon my hitting install to Boot.
Just thought of another Q, if there is no recovery partition, where is the OEM recovery stored? (I figured the lack of a recovery partition is why TWRP gets overwritten if installed without a custom ROM)
I did a quick read on that, it seems really interesting and may be of some use as soon as I learn more.
I've got so much to learn about this. I keep meaning to take time to begin, but stuff comes up and boom more changes.
I've got to do more reading to take advantage of that.
@MrSteelX mentioned that I could have used TWRP to install a ROM from the PC.
Is this what is referred to as "sideloading". I've been looking for some info on this and haven't really come across much that is any good.
Are there any available guides that anyone can point to so I can learn about using TWRP that way?
noncomjd said:
Thanks for that. and that explains a few things and explains why when I installed TWRP, I didn't see the recovery option. Doesn't pardon my hitting install to Boot.
Just thought of another Q, if there is no recovery partition, where is the OEM recovery stored? (I figured the lack of a recovery partition is why TWRP gets overwritten if installed without a custom ROM)
I did a quick read on that, it seems really interesting and may be of some use as soon as I learn more.
I've got so much to learn about this. I keep meaning to take time to begin, but stuff comes up and boom more changes.
I've got to do more reading to take advantage of that.
@MrSteelX mentioned that I could have used TWRP to install a ROM from the PC.
Is this what is referred to as "sideloading". I've been looking for some info on this and haven't really come across much that is any good.
Are there any available guides that anyone can point to so I can learn about using TWRP that way?
Click to expand...
Click to collapse
In twrp, you go to advance/sideload. Twrp then waits for adb sideload to push file to phone then auto flashes file.
In your case, you would sideload rom to flash and have been go to go.
noncomjd said:
Own the OPP6; Rooted, on OxygenOS 5.18.
Went to install the newest TWRP (was going to install XXX no limits), when asked where to install it to, accidentally, without thinking, hit install to Boot.
Problems.
I can get into fastboot, the PC sees the phone in fastboot.
Have tried to flash a recovery image and similar, got an error saying: FAILED (remote: (recovery_b) No such partition).
Just want to get the phone booting again, wipe the whole thing start over, from fastboot.
Any help appreciated.
Click to expand...
Click to collapse
If you have working fastboot mode and getting detected via fastboot then
fastboot flashable stock rom via fastboot mode.
U don't have to do anything just downloaded zip file unzip it any folder u want. Connect u r phone to. Computer in fastboot mode
Then go to that folder and just click flash all bat waut for 10to 15 min and then phone boots in working oos.
(all data will be get wipes after this)
Link
https://www.google.co.in/amp/s/foru...m-stock-fastboot-roms-oneplus-6-t3796665/amp/
MrSteelX said:
In twrp, you go to advance/sideload. Twrp then waits for adb sideload to push file to phone then auto flashes file.
In your case, you would sideload rom to flash and have been go to go.
Click to expand...
Click to collapse
Thanks.
I will give this a try. After I learn a little more about the A/B partitions & recovery on this phone, I want to try one on the custom ROMs.
pankspoo said:
If you have working fastboot mode and getting detected via fastboot then
fastboot flashable stock rom via fastboot mode.
U don't have to do anything just downloaded zip file unzip it any folder u want. Connect u r phone to. Computer in fastboot mode
Then go to that folder and just click flash all bat waut for 10to 15 min and then phone boots in working oos.
(all data will be get wipes after this)
Link
https://www.google.co.in/amp/s/foru...m-stock-fastboot-roms-oneplus-6-t3796665/amp/
Click to expand...
Click to collapse
Thanks for the link/guide. I had been trying an iteration of this (and the guide) but after reading your link, it too explains some things. I was trying to restore a Stock ROM from fastboot according to your link:
Things are changing with the advent of project treble. OnePlus will no longer release ROMs flashable via recovery (either stock or twrp) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlcoked. This will erase all your data and will wipe
I download and was trying to use the stock ROMs, I didn't see any bats, and now I know why.
Lots more reading to do. I love doing playing with this stuff, but trying to learn & keep up with things burns time, which most days I don't have.
This is the longest I've ever been on a stock OS (6 weeks? got the phone right after its release) although it's rooted (can never leave things completely alone).
noncomjd said:
Thanks for the link/guide. I had been trying an iteration of this (and the guide) but after reading your link, it too explains some things. I was trying to restore a Stock ROM from fastboot according to your link:
Things are changing with the advent of project treble. OnePlus will no longer release ROMs flashable via recovery (either stock or twrp) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlcoked. This will erase all your data and will wipe
I download and was trying to use the stock ROMs, I didn't see any bats, and now I know why.
Lots more reading to do. I love doing playing with this stuff, but trying to learn & keep up with things burns time, which most days I don't have.
This is the longest I've ever been on a stock OS (6 weeks? got the phone right after its release) although it's rooted (can never leave things completely alone).
Click to expand...
Click to collapse
I have to unzip the downloaded fastboot ROM at any folder on computer and open that folder u will see named [flash all bat]
Now connect phone in fastboot mode to computer and just click [flash all bat] file
noncomjd said:
Thanks for that. and that explains a few things and explains why when I installed TWRP, I didn't see the recovery option. Doesn't pardon my hitting install to Boot.
Just thought of another Q, if there is no recovery partition, where is the OEM recovery stored? (I figured the lack of a recovery partition is why TWRP gets overwritten if installed without a custom ROM)
I did a quick read on that, it seems really interesting and may be of some use as soon as I learn more.
I've got so much to learn about this. I keep meaning to take time to begin, but stuff comes up and boom more changes.
I've got to do more reading to take advantage of that.
@MrSteelX mentioned that I could have used TWRP to install a ROM from the PC.
Is this what is referred to as "sideloading". I've been looking for some info on this and haven't really come across much that is any good.
Are there any available guides that anyone can point to so I can learn about using TWRP that way?
Click to expand...
Click to collapse
"recovery" (what's left of it... wipe and mostly nothing else) is inside the boot partition. TWRP on those devices is installed into the boot partition (NOT overwriting the boot partition, but into the "ramdisk", a part of the kernel where OEM recovery resides and where TWRP, Magisk, Xposed and all the mods do their stuff on the kernel. On a phone with A/B partitions, you have to fastboot BOOT twrp, and then you have to flash the installer zip, you should never ever flash the image to any partition since there isn't any.
RusherDude said:
"recovery" (what's left of it... wipe and mostly nothing else) is inside the boot partition. TWRP on those devices is installed into the boot partition (NOT overwriting the boot partition, but into the "ramdisk", a part of the kernel where OEM recovery resides and where TWRP, Magisk, Xposed and all the mods do their stuff on the kernel. On a phone with A/B partitions, you have to fastboot BOOT twrp, and then you have to flash the installer zip, you should never ever flash the image to any partition since there isn't any.
Click to expand...
Click to collapse
Thanks for the information.
and this is what I did, originally I thought I had accidentally selected the wrong partition, but it seems since there is no recovery partition, I did it wrong from the start.
Q: I'm guessing this is why when you do load TWRP (the correct way, which I did once, following a guide) without a custom ROM (still using Oxygen OS) that the OEM recovery overwrites TWRP or the OEM recovery is called up at the next reboot into recovery?
Q: I understand, at least in theory the benefit of the A/B partitions, what is the benefit of eliminating the recovery partition other than giving more control of the phone to the OEM and OS? Is this setup limited to the stock kernel or mandated to be copied by any potential replacement kernels (this information is new to me, I haven't yet read up on kernels).
hi guys,
my op6 is running stock oos with magisk as root. My phone worked fine for several months. Today I tried switching magisk from the stable version to canary by first upgrading the manager app and then hitting the direct install option. This failed several times and I got an error saying:
! Unable to unpack boot image
I thought this could be fixed by a reboot, but well... it wasn't. Now the phone only boots into the bootloader. I booted into twrp and tried to uninstall magisk via the uninstall.zip. This fails with error
-Unpacking boot image
! Unsupported/Unknown image format
- Unmounting partitions
cd /tmp/repackorig/ && /sbin/magiskboot unpack -h '/tmp/repackorig/boot.img' process ended with ERROR: 1
Error unpacking image
I don't really know what this means. I'm guessing my boot.img is corrupted?
Is there any way I can solve this problem without a factory reset? Can I just flash the stock boot.img via fastboot?
Do you have any idea what went wrong here, so that I can avoid the error next time?
Yesterday I broke op5 during the magisk update. The repair was simple, flash stock boot.img as boot partition.
I flashed it from TWRP.
Try dirty flashing your ROM without flashing magisk.
I'm also facing the same issues. Tried updating from the Magisk App. Didn't receive any error messages. After reboot I'm stuck in fastboot mode and I cannot access recovery. I do not have a backup of the data on this phone.
Is there any way I can still (temporarily) access the data? I'm panicking a little bit. My OOS is stock and rooted and hasn't been updated in about a year. I'm not sure if I can still figure out the specific OOS version that is installed.
EDIT:
Have been trying to flash the stock boot.img with fastboot. I've tried both 10.0.1 and 10.3.0 so far. Both resulted in the "BOOTLOADER UNLOCKED" warning and got stuck there. 10.3.1 is my last option, because I don't think I've updated this device since. Would it make a difference if I tried to do it from twrp?
EDIT2:
I do however have access to the recovery mode now. If I'm not mistaken this means I might be able to extract the data.
EDIT3:
The recovery mode is not asking me for my unlock pattern (which I think it should be doing) and is not showing up under 'adb devices'. I've tried flashing the boot.img of all OOS versions I can think of with fastboot, nothing will let me boot back in or let me access adb through the recovery. Am I ****ed?
MoresM said:
I'm also facing the same issues. Tried updating from the Magisk App. Didn't receive any error messages. After reboot I'm stuck in fastboot mode and I cannot access recovery. I do not have a backup of the data on this phone.
Is there any way I can still (temporarily) access the data? I'm panicking a little bit. My OOS is stock and rooted and hasn't been updated in about a year. I'm not sure if I can still figure out the specific OOS version that is installed.
EDIT:
Have been trying to flash the stock boot.img with fastboot. I've tried both 10.0.1 and 10.3.0 so far. Both resulted in the "BOOTLOADER UNLOCKED" warning and got stuck there. 10.3.1 is my last option, because I don't think I've updated this device since. Would it make a difference if I tried to do it from twrp?
EDIT2:
I do however have access to the recovery mode now. If I'm not mistaken this means I might be able to extract the data.
EDIT3:
The recovery mode is not asking me for my unlock pattern (which I think it should be doing) and is not showing up under 'adb devices'. I've tried flashing the boot.img of all OOS versions I can think of with fastboot, nothing will let me boot back in or let me access adb through the recovery. Am I ****ed?
Click to expand...
Click to collapse
Maybe it's worth trying change the slot and see if it will start? Of course from the fastboot level.
MoresM said:
I'm also facing the same issues. Tried updating from the Magisk App. Didn't receive any error messages. After reboot I'm stuck in fastboot mode and I cannot access recovery. I do not have a backup of the data on this phone.
Click to expand...
Click to collapse
I managed to fix it as well by flashing the stock boot.img for my software version to both slot_a and slot_b using fastboot. I left the active slot setting alone otherwise.
Afterwards I booted into twrp through fastboot and installed blu spark twrp and magisk 21.4 from there as a user suggested on the Magisk github: https://github.com/topjohnwu/Magisk/issues/3924
Note that github link also has a solution to flawlessly upgrade to latest Magisk without data loss but I haven't had the time to look at it.