Database Info

My MIX 3 stuck in bootloop with any custom ROM but MIUI ones

Hi. For some reason, I'm not able to make my phone working with any custom ROM but MIUI ones. I tried the guides about flashing the 9.5.9 first, flashing the firmware but still, every time I flash a custom ROM (with flash result 1 in TWRP) and I reboot into the system, the phone keeps rebooting quickly after displaying only the MI logo. Apparently it shows that there isn't a valid firmware installed, but I followed the guides with no success. Any advice? Thanks!

Takenfal said:
Hi. For some reason, I'm not able to make my phone working with any custom ROM but MIUI ones. I tried the guides about flashing the 9.5.9 first, flashing the firmware but still, every time I flash a custom ROM (with flash result 1 in TWRP) and I reboot into the system, the phone keeps rebooting quickly after displaying only the MI logo. Apparently it shows that there isn't a valid firmware installed, but I followed the guides with no success. Any advice? Thanks!
Click to expand...
Click to collapse
Hello try to install magisk after installing the rom it worked for me so i hope it does for you as well but don't reboot literally flash the rom when it's done flash magisk and i think it should do it

Format data after flash, not just wipe

Sammy1221 said:
Hello try to install magisk after installing the rom it worked for me so i hope it does for you as well but don't reboot literally flash the rom when it's done flash magisk and i think it should do it
Click to expand...
Click to collapse
Ok, I'll do it when I'll try to install a custom ROM again; I can't keep trying formatting my data and then returning back to MIUI I need to be sure it will work!
siggey said:
Format data after flash, not just wipe
Click to expand...
Click to collapse
Did it! The process I did was:
Boot on TWRP and format data
reboot TWRP
Wipe cache, dalvik, data and System
Flash FW, ROM, GAPPS

Takenfal said:
Hi. For some reason, I'm not able to make my phone working with any custom ROM but MIUI ones. I tried the guides about flashing the 9.5.9 first, flashing the firmware but still, every time I flash a custom ROM (with flash result 1 in TWRP) and I reboot into the system, the phone keeps rebooting quickly after displaying only the MI logo. Apparently it shows that there isn't a valid firmware installed, but I followed the guides with no success. Any advice? Thanks!
Click to expand...
Click to collapse
Which twrp version did you use? Also try Resurrection Remix, it had simple flashing method.

GVN.Gallus said:
Which twrp version did you use? Also try Resurrection Remix, it had simple flashing method.
Click to expand...
Click to collapse
Actually that was the ROM I wanted to use XD I tried 3 different Kernels but noone worked :/ I'm using the twrp-3.3.1-5

Takenfal said:
Actually that was the ROM I wanted to use XD I tried 3 different Kernels but noone worked :/ I'm using the twrp-3.3.1-5
Click to expand...
Click to collapse
Hmm, unofficial twrp 3315 by mauronofrio?
Which device variant do you have, china or global? And device code name are perseus(4g)?
I suggest make a clean flash (without relock) with miflashtool, then install any new EU rom, after that try flash RR, with these step nothing could go wrong.

GVN.Gallus said:
Hmm, unofficial twrp 3315 by mauronofrio?
Which device variant do you have, china or global? And device code name are perseus(4g)?
I suggest make a clean flash (without relock) with miflashtool, then install any new EU rom, after that try flash RR, with these step nothing could go wrong.
Click to expand...
Click to collapse
Yes, It should be the 3.3.1.5 by mauronofrio; my Mi MIX 3 is the global version and right now I'm using the MIUI 11 9.10.10. What version of MIUI should I install using miflashtool? Thanks!

I cannot get data decryption with Android Q on any of the twrp builds.
Sent from my MIX 3 using Tapatalk

Takenfal said:
Yes, It should be the 3.3.1.5 by mauronofrio; my Mi MIX 3 is the global version and right now I'm using the MIUI 11 9.10.10. What version of MIUI should I install using miflashtool? Thanks!
Click to expand...
Click to collapse
Try last global beta 9.6.27, its the most stable with new feature, even better than global stable.
Then install any eu miui10 rom newer than 9.6.27, after that install custom rom.
Remember to boot up after each install, not necessary to complete set up, just boot up to welcome screen.

you saved my life
Sammy1221 said:
Hello try to install magisk after installing the rom it worked for me so i hope it does for you as well but don't reboot literally flash the rom when it's done flash magisk and i think it should do it
Click to expand...
Click to collapse

Even though the thread is quite old I have exactly the same problem with no suggestion here in the forums working to fix it
Can anybody please help me getting this figured out. My goal is to install the Pixel experience Rom for perseus (non 5g) posted here.

You MUST FORMAT data partition when you install anything from stock roms. It should boot after you format, and I'm not saying with the rm -rf option in settings if you have TWRP. It must be a full format of data. I know some of the older ROMs used to take many minutes to boot the first time (like up to 10). I am not actively developing for android after they turned on the hardware backed verity states and broke Google Pay with unlocked bootloader, I left android.

Unable to boot recovery after Android 10 Open Beta 1 OTA

Hi everyone!
Issue is pretty simple to explain - after upgrading via OTA from the latest open beta Pie (29) to open beta Android 10 (30), I can't boot into recovery.
System works normally, the only thing I'm having trouble with are the generic issues discussed on the OP community forum (autorotate and other sensors, Gboard gap...). It is recommended repeatedly that one should reboot to recovery and wipe the cache partition.
The problem is that I can only get into fastboot mode - tried the advanced boot menu, adb/fastboot and selecting recovery mode while in the fastboot mode but it always goes into fastboot.
TWRP doesn't support android 10 yet as far as I know and I've found no other reference of this issue anywhere else. Only thing that comes to mind is to wait for the next open beta and hope it will be resolved after another OTA.
Thanks for your help!

seems the open beta install was more bad for you than mine. Upgraded from op29 to op30 like you, but i had everything stock. No unlocked bootloader, no big customizations, etc. I just tried entering recovery mode via fastboot and it worked like normal for me, had to enter my pin to decrypt my data, and the rest like normal. I'd suggest to downgrade back to pie and reflash the open beta software to see if the issue is gone or not, but that's your call to do so.

HighOnLinux said:
seems the open beta install was more bad for you than mine. Upgraded from op29 to op30 like you, but i had everything stock. No unlocked bootloader, no big customizations, etc. I just tried entering recovery mode via fastboot and it worked like normal for me, had to enter my pin to decrypt my data, and the rest like normal. I'd suggest to downgrade back to pie and reflash the open beta software to see if the issue is gone or not, but that's your call to do so.
Click to expand...
Click to collapse
I think you stumbled across the answer everyone has been searching for. How did you upgrade? Did you download the whole zip and flash through updated?
This kinda makes sense. Do you remember how big the update file was? It could have been an incremental rather than a full if you weren't unlocked and thus (maybe) didn't change fastboot.

verbatim7 said:
Hi everyone!
Issue is pretty simple to explain - after upgrading via OTA from the latest open beta Pie (29) to open beta Android 10 (30), I can't boot into recovery.
System works normally, the only thing I'm having trouble with are the generic issues discussed on the OP community forum (autorotate and other sensors, Gboard gap...). It is recommended repeatedly that one should reboot to recovery and wipe the cache partition.
The problem is that I can only get into fastboot mode - tried the advanced boot menu, adb/fastboot and selecting recovery mode while in the fastboot mode but it always goes into fastboot.
TWRP doesn't support android 10 yet as far as I know and I've found no other reference of this issue anywhere else. Only thing that comes to mind is to wait for the next open beta and hope it will be resolved after another OTA.
Thanks for your help!
Click to expand...
Click to collapse
Had read somewhere that flashing stock boot.img will help restore stock recovery.. Have you tried doing that

brashmadcap said:
I think you stumbled across the answer everyone has been searching for. How did you upgrade? Did you download the whole zip and flash through updated?
This kinda makes sense. Do you remember how big the update file was? It could have been an incremental rather than a full if you weren't unlocked and thus (maybe) didn't change fastboot.
Click to expand...
Click to collapse
i grabbed the update file from this news article from xda itself: https://www.xda-developers.com/oneplus-android-10-oxygenos-beta-oneplus-6-6t/
the update zip was the full update and not incremental. i updated my device using the local device upgrader found under the system update settings to do the job for me.
Edit: this part down was meant for OP, sorry for confusion
so far when i updated last night, the auto rotate was tripping, until you mentioned that wiping the cache should do the trick (and it did do the trick thanks for that).
But back to your problem, you should try flashing the file under the link i put into this reply and if it doesn't work, just back up your data, downgrade back to pie, and flash the full update file that is present within that article and you should be back to normal

HighOnLinux said:
i grabbed the update file from this news article from xda itself: https://www.xda-developers.com/oneplus-android-10-oxygenos-beta-oneplus-6-6t/
the update zip was the full update and not incremental. i updated my device using the local device upgrader found under the system update settings to do the job for me. so far when i updated last night, the auto rotate was tripping, until you mentioned that wiping the cache should do the trick (and it did do the trick thanks for that).
But back to your problem, you should try flashing the file under the link i put into this reply and if it doesn't work, just back up your data, downgrade back to pie, and flash the full update file that is present within that article and you should be back to normal
Click to expand...
Click to collapse
Thanks for the idea. Unfortunately, it seems that having root and having recovery isn't possible for me at this point.
I've installed the OTA, got the recovery back and managed to wipe cache and everything worked - except I didn't have root. Then I've installed the magisk boot image to get back root, but then the same issues started happening and I was unable to access recovery.
Now I have to decide what's more important :crying:

Use an older version of magisk and you won't lose twrp

verbatim7 said:
Thanks for the idea. Unfortunately, it seems that having root and having recovery isn't possible for me at this point.
I've installed the OTA, got the recovery back and managed to wipe cache and everything worked - except I didn't have root. Then I've installed the magisk boot image to get back root, but then the same issues started happening and I was unable to access recovery.
Now I have to decide what's more important :crying:
Click to expand...
Click to collapse
how did u get back the recovery?

LazerH said:
how did u get back the recovery?
Click to expand...
Click to collapse
As stated above - just downloaded the OTA Android 10 update file for the right device, installed it and didn't install magisk to inactive slot and I had it back. If I tried to install magisk to keep root I didn't have the recovery mode. My guest guess is that magisk still isn't fully compatible with the new Android 10 boot changes.

verbatim7 said:
Thanks for the idea. Unfortunately, it seems that having root and having recovery isn't possible for me at this point.
I've installed the OTA, got the recovery back and managed to wipe cache and everything worked - except I didn't have root. Then I've installed the magisk boot image to get back root, but then the same issues started happening and I was unable to access recovery.
Now I have to decide what's more important :crying:
Click to expand...
Click to collapse
To me having a stable phone is much more important than a heavily modified device that's unstable at any given time. I'd say use the msm tool, flash back to a fresh build of pie, download the full open beta 30 zip, after its done flashing, reboot twice to iron out any present issues, then unlock the bootloader, and then you should be good to go. If you want root, just fastboot boot into twrp and flash the latest magisk zip and you're good to go. At the end you should have root, an unlocked bootloader, all while on the open beta android 10 build, with access to the stock recovery

Can u guys help me please, i just flashed by mistake with " fastboot flash boot" a TWRP enchilada file and now i'm stuck in fastboot and i cant boot ...i dont know how to factory reset or flash firmware from fastboot (

terrorblade23 said:
Can u guys help me please, i just flashed by mistake with " fastboot flash boot" a TWRP enchilada file and now i'm stuck in fastboot and i cant boot ...i dont know how to factory reset or flash firmware from fastboot (
Click to expand...
Click to collapse
Had the same problem. Flash this one: https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
OOS 10 Open Beta 1 Stock Boot

Schnullifax said:
Had the same problem. Flash this one: https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
OOS 10 Open Beta 1 Stock Boot
Click to expand...
Click to collapse
thanks..this is what i was looking for ...the problem is that now i'm in a boot loop , the dots keep spinning 4ever...and i did factory reset it from recovery
up1: i managed to install on slot a (i guess) Twrp.. but the whole memory is empty and i cant place anything (firmware) with pc on phone
formated data from twrp (to some format ntfc4 or smth like that ) and installed back android q and is working .

Unresponsive touch screen in TWRP - how can install a ROM?

So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots? I wish I could check but since my touch screen doesn't work in TWRP..
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?

kerelberel said:
So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, where do I download it, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots?
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?
Click to expand...
Click to collapse
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip

vinoxflame said:
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip
Click to expand...
Click to collapse
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.

kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
then try another version of twrp or the unofficial orangefox recovery for our device

vinoxflame said:
then try another version of twrp or the unofficial orangefox recovery for our device
Click to expand...
Click to collapse
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.

kerelberel said:
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.
Click to expand...
Click to collapse
it's on the telegram group

vinoxflame said:
it's on the telegram group
Click to expand...
Click to collapse
No it is not. There's no mention of G7 Power in the search results. Only E5.

kerelberel said:
No it is not. There's no mention of G7 Power in the search results. Only E5.
Click to expand...
Click to collapse
deleted

vinoxflame said:
https://t.me/mG7Power
tell me if it is not!!!!
Click to expand...
Click to collapse
From the desktop search in this one I couldn't find it: https://t.me/OrangeFoxRecovery I didn't know there was a separate chat for each device. But thanks.

FWIW when this happened to me I did the blankflash thing to get it back to bootloader. Then I used the LMSA tool from Motorola to do a rescue/restore.
I also used LMSA to force the update to the most recent security update. In general, it seems a very useful utility.
https://www.motorola.com/us/lenovo-motorola-smart-assistant

I had this issue after blankflashing this temperamental device out of a brick. While in twrp you can do "adb shell" then "twrp install /path/to/zip" I think this has to do with new twrp versions on older firmwares

kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done.
---------- Post added at 06:06 PM ---------- Previous post was at 05:58 PM ----------
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done. The latest stock RETUS build i can find is here https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip but if i do that i will lose all my apps AGAIN etc I am trying to just get the stock recovery img from previous version so I can install the ota in magisk you just tap uninstall tap restore images to get stock boot as well then ota should work once its done go back into magisk and install to inactive slot but you will or could need TWRP A/B retention script so that you keep it even after ota...which you will first go in magisk tap uninstall restore images, but must have stock recovery not twrp installed at this time either from what i can tell, once ota is successful install the TWRP A/B Retention script but do this before you install magisk to inactive slot from magisk manager after that it should work. But I cannot locate a stock recovery.img thus far.... and I dont wanna redownload my apps right now, so I may just wait til I see a rom i really think ill like and say screw it.

kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.

s33b said:
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.
Click to expand...
Click to collapse
I've flashed another stock rom (https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138) and it worked with twrp-3.3.1-0-ocean.img not with the newest.

kerelberel said:
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
Click to expand...
Click to collapse
You use fastboot commands in the bootloader.
The firmware contains a flash file with all fastboot commands you'll need.
kerelberel said:
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
Click to expand...
Click to collapse
TWRP has adb enabled by default. So instead of TWRP you can use
Code:
abd shell twrp --help
So you can use the basic functions like backup, install, and so on.

I had the same issue...
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.

TheGuysGuysGuy said:
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.
Click to expand...
Click to collapse
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)

roadkill42 said:
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)
Click to expand...
Click to collapse
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.

TheGuysGuysGuy said:
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.
Click to expand...
Click to collapse
The problem with the touch is the right driver needs to b installed that kernel I shared makes it work and stick I'm on it now go to tellagram group Moto g7 power support group both twrp and ofox there that works not the one from twrp it's self and the twrp there has some other features that one from official one has that don't work

This boot image gave me a touchscreen and allowed me to flash a regular twrp: hxxps://f.emvn.me/android-roms-and-stuff/twrp.3.4-kakarot.boot.img
Thanks to whoever made it.

Nokia 3 fastboot boot loop

In trying to root my Nokia 3, I installed TWRP custom recovery but realised that I forgot to install magisk manager. Upon rebooting the phone out of TWRP recovery mode my Nokia 3 is now stuck in a boot loop such that whenever I turn the device off or reboot it, either from adb or TWRP, the device inevitably only reboots in fastboot mode. Even using the fastboot reboot command doesn't work and only boots it up again only for it to enter fastboot mode immediately.
This means that I can't access the phone as usual meaning I'm unable to download the magisk.zip file I need to install magisk. I tried cloning the git-master and sideloading that from my computer but it said invalid .zip format.
Any idea what I can do?

Are you sure you haven't deleted the ROM by accident?, that same thing happened to me before.

andres_vacal said:
Are you sure you haven't deleted the ROM by accident?, that same thing happened to me before.
Click to expand...
Click to collapse
I don't see how I might have done this seeing as I'd guess such a thing would only be possible if I had root on my device. I haven't rooted it yet.
But if I'm mistaken on that, using the TWRP file manager shows an empty /boot/ directory. Is there any way I can restore normal functionality to my device? I just need to be able to get magisk on there so I can install in through TWRP and then root the phone so I can get a custom ROM

Totalitor said:
I don't see how I might have done this seeing as I'd guess such a thing would only be possible if I had root on my device. I haven't rooted it yet.
But if I'm mistaken on that, using the TWRP file manager shows an empty /boot/ directory. Is there any way I can restore normal functionality to my device? I just need to be able to get magisk on there so I can install in through TWRP and then root the phone so I can get a custom ROM
Click to expand...
Click to collapse
But, in TWRP, when you go to reboot section, does it says "No OS Installed"? ( in the upper side )

andres_vacal said:
But, in TWRP, when you go to reboot section, does it says "No OS Installed"? ( in the upper side )
Click to expand...
Click to collapse
It doesn't. I suppose the contents of /boot just isn't visible because I haven't rooted the phone yet?

Totalitor said:
It doesn't. I suppose the contents of /boot just isn't visible because I haven't rooted the phone yet?
Click to expand...
Click to collapse
idts, have you tried to wipe and install constum ROM again?

andres_vacal said:
idts, have you tried to wipe and install constum ROM again?
Click to expand...
Click to collapse
No. I haven't installed a custom ROM. It was the default android 8.0 OS. I haven't been able to root the phone yet because I don't have magisk manager installed.
The only thing I've installed has been TWRP custom recovery. As I understand it, you can't even install custom ROMS unless the phone is already rooted.

Totalitor said:
No. I haven't installed a custom ROM. It was the default android 8.0 OS. I haven't been able to root the phone yet because I don't have magisk manager installed.
The only thing I've installed has been TWRP custom recovery. As I understand it, you can't even install custom ROMS unless the phone is already rooted.
Click to expand...
Click to collapse
No, you only look for the rom of your specific device, and then just flash it trought TWRP

andres_vacal said:
No, you only look for the rom of your specific device, and then just flash it trought TWRP
Click to expand...
Click to collapse
Ok then. I haven't actually been able to find any ROMS for the Nokia 3 other than the stock ROM.
Do you know of any custom ROMS for the device?

andres_vacal said:
No, you only look for the rom of your specific device, and then just flash it trought TWRP
Click to expand...
Click to collapse
I ran adb sideload on the update.zip file downloaded from here.
It seems to have restored my nokia 3 device's recovery to a stock recovery.
Attempting to reboot the device merely reboots it to the stock recovery mode. I cannot seem to get it to reboot into the phone's normal state.
In addition, adb, even while running under root permissions, can no longer detect the device.
I have tried wiping the device, factory resetting it, but the device refuses to reboot into it's normal mode. I can only reboot it into stock recovery or the bootloader.

Totalitor said:
I ran adb sideload on the update.zip file downloaded from here.
It seems to have restored my nokia 3 device's recovery to a stock recovery.
Attempting to reboot the device merely reboots it to the stock recovery mode. I cannot seem to get it to reboot into the phone's normal state.
In addition, adb, even while running under root permissions, can no longer detect the device.
I have tried wiping the device, factory resetting it, but the device refuses to reboot into it's normal mode. I can only reboot it into stock recovery or the bootloader.
Click to expand...
Click to collapse
Make sure bootloader is unlocked. In fact if it turned back into stock recovery is because the ROM is already installed. Try to repeat the instalation process using TWRP and try to use another version of the stock ROM.

andres_vacal said:
Make sure bootloader is unlocked. In fact if it turned back into stock recovery is because the ROM is already installed. Try to repeat the instalation process using TWRP and try to use another version of the stock ROM.
Click to expand...
Click to collapse
My phone randomly decided it'd revert back to TWRP custom recovery today but I still can't access the main operating mode of the phone. Do you know where I can find either a custom ROM for the Nokia 3 or the stock ROM? All instructions I find online seem to be in broken english so I'm having some difficulty following a lot of the guides as they're rather vague

andres_vacal said:
Make sure bootloader is unlocked. In fact if it turned back into stock recovery is because the ROM is already installed. Try to repeat the instalation process using TWRP and try to use another version of the stock ROM.
Click to expand...
Click to collapse
As mentioned in my previous post, my phone reverted back to TWRP custom recovery for some reason. I tried sideloading the Magisk.zip file and it said it successfully flashed it, but now my Android system has reverted back to the standard Android recovery, booting into it by default.
it says
"alps/NE1_00WW_FIH/NE1
7.1.1/NMF260/00WW_2_15A
/user/release-keys"
at the top.

Totalitor said:
The bootloader was unlocked at some point but I guess it must have locked itself again at some stage when I reset it. Though now that my phone seems to be stuck in bootloader mode and stock recovery mode exclusively, I'm not able to view the serial number in settings as that's something one may only do when the normal mode of the device can be accessed.
I'd use adb to retrieve the serial number of the device but adb doesn't seem to be able to detect my device. I have the necessary drivers on my computer and am running on root privileges but it seems it can't detect it if it's not in the normal operating mode. Any idea how I can get the serial number?
Click to expand...
Click to collapse
I think before flashing magisk we should make sure the OS is ok, can you write the specific phone model?, "Nokia 3" is not an specific number. Then we should be able to find at least a stock ROM.

andres_vacal said:
I think before flashing magisk we should make sure the OS is ok, can you write the specific phone model?, "Nokia 3" is not an specific number. Then we should be able to find at least a stock ROM.
Click to expand...
Click to collapse
It's a Nokia 3 TA-1032
Sorry, I should've specified.

Totalitor said:
It's a Nokia 3 TA-1032
Sorry, I should've specified.
Click to expand...
Click to collapse
Okay man, I did some research and found out that there is not so much info about the specific model but there is some people with the same problem. Found this thread useful so let's try out that.
Nokia 3 official Firmware India/UAE Region [ Links updated with Flash tool]
Hi All, Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) Download link Nokia 3 Firmware :- https://mega.nz/#F!1ENgnThL!FyL9uYCC3Dq-16elThKAPg----- latest for Nokia 3 is v 2.15H Nokia 5 Firmware :-...
forum.xda-developers.com

andres_vacal said:
Okay man, I did some research and found out that there is not so much info about the specific model but there is some people with the same problem. Found this thread useful so let's try out that.
Nokia 3 official Firmware India/UAE Region [ Links updated with Flash tool]
Hi All, Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) Download link Nokia 3 Firmware :- https://mega.nz/#F!1ENgnThL!FyL9uYCC3Dq-16elThKAPg----- latest for Nokia 3 is v 2.15H Nokia 5 Firmware :-...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks, But all of the links on that thread to nokia 3 firmware are dead. In the meantime I used the adb push command to upload the magisk.zip file to my device as well as the Lineage 14.1 custom ROM which I got from here and tried installing both of them using TWRP. TWRP said both were successful but on reboot, my phone is once again stuck in the orange state at the boot screen.

Totalitor said:
Thanks, But all of the links on that thread to nokia 3 firmware are dead. In the meantime I used the adb push command to upload the magisk.zip file to my device as well as the Lineage 14.1 custom ROM which I got from here and tried installing both of them using TWRP. TWRP said both were successful but on reboot, my phone is once again stuck in the orange state at the boot screen.
Click to expand...
Click to collapse
Ow, I didn't check that, my bad. Have you tried to flash only LOS?, generally the problem with LOS is that you need to have installed the stock ROM for it to function well, if you wipe and then flash LOS it will say "successful" but it won't start.
Or at least at my experience

andres_vacal said:
Are you sure you haven't deleted the ROM by accident?, that same thing happened to me before.
Click to expand...
Click to collapse
we've established that I must have somehow accidentally deleted the ROM in installing TWRP.
You mentioned you accidentally deleted the ROM. How did you go about fixing your problem?
I've looked everywhere online for Nokia 3 TA-1032 stock firmware but all I can find are dead google drive links. How did you fix your issue? Or was yours with a different model of phone?

Totalitor said:
we've established that I must have somehow accidentally deleted the ROM in installing TWRP.
You mentioned you accidentally deleted the ROM. How did you go about fixing your problem?
I've looked everywhere online for Nokia 3 TA-1032 stock firmware but all I can find are dead google drive links. How did you fix your issue? Or was yours with a different model of phone?
Click to expand...
Click to collapse
Mine was with an Asus, and the only way I could fix the horrible bootloop was managing to install the stock un-official ROM made from a well known developer. I just did a short research on this case, and all the solutions on internet say you need the ROM like I just told you, so I think there is no way if we cannot find a ROM for the device.

Fastboot ROM for Android 11 needed, thanks!

Hi guys,
I made a mistake installing the Android 11 firmware update and afterwards flashing TWRP and installing Magisk.
Second mistake because I couldn't boot I flashed an old Fastboot ROM, but that doesn't help me.
Can anyone please point me to the fastboot rom for android 11 update?
Thank you very much.

ConsoleHax said:
Hi guys,
I made a mistake installing the Android 11 firmware update and afterwards flashing TWRP and installing Magisk.
Second mistake because I couldn't boot I flashed an old Fastboot ROM, but that doesn't help me.
Can anyone please point me to the fastboot rom for android 11 update?
Thank you very much.
Click to expand...
Click to collapse
Did you ever get any help? I am in the same boat.

ConsoleHax said:
Hi guys,
I made a mistake installing the Android 11 firmware update and afterwards flashing TWRP and installing Magisk.
Second mistake because I couldn't boot I flashed an old Fastboot ROM, but that doesn't help me.
Can anyone please point me to the fastboot rom for android 11 update?
Thank you very much.
Click to expand...
Click to collapse
I guess the best way to go back to stock is using msmtool you can find it here: with android 10 for international and European version: Thread '[OP7PRO][LATEST OOS 10.3.8 GM21AA | OOS 10.0.10 GM21BA] Collection of unbrick tools' https://forum.xda-developers.com/t/...0-gm21ba-collection-of-unbrick-tools.3956595/
Piricho said:
Did you ever get any help? I am in the same boat.
Click to expand...
Click to collapse
If you ended with a blinking TWRP just flash the stock/rooted boot.img if you are using stable you can obtain it here(Post in thread 'Android 11 Release - Finally!' https://forum.xda-developers.com/t/android-11-release-finally.4251267/post-84717089)
Or if you are on a Open Beta here: Thread 'OxygenOS Android 11 Betas (OnePlus 7 Pro) released (Open Beta 4 now available)' https://forum.xda-developers.com/t/...o-released-open-beta-4-now-available.4221067/

RokCruz said:
I guess the best way to go back to stock is using msmtool you can find it here: with android 10 for international and European version: Thread '[OP7PRO][LATEST OOS 10.3.8 GM21AA | OOS 10.0.10 GM21BA] Collection of unbrick tools' https://forum.xda-developers.com/t/...0-gm21ba-collection-of-unbrick-tools.3956595/
If you ended with a blinking TWRP just flash the stock/rooted boot.img if you are using stable you can obtain it here(Post in thread 'Android 11 Release - Finally!' https://forum.xda-developers.com/t/android-11-release-finally.4251267/post-84717089)
Or if you are on a Open Beta here: Thread 'OxygenOS Android 11 Betas (OnePlus 7 Pro) released (Open Beta 4 now available)' https://forum.xda-developers.com/t/...o-released-open-beta-4-now-available.4221067/
Click to expand...
Click to collapse
Hey,
I bricked my OP7 after what seemed like successfully installing and using Android 11. I am getting the Teamwin blinking brick.
This(
) seems like something I can do- flashing Fastboot ROM(even though I'll lose data, but wth). Can you please tell me if this comment of yours applies in my case- i.e. is the link you are suggesting for Android 11 Fastboot ROM valid?

saurabh_op7 said:
Hey,
I bricked my OP7 after what seemed like successfully installing and using Android 11. I am getting the Teamwin blinking brick.
This(
) seems like something I can do- flashing Fastboot ROM(even though I'll lose data, but wth). Can you please tell me if this comment of yours applies in my case- i.e. is the link you are suggesting for Android 11 Fastboot ROM valid?
Click to expand...
Click to collapse
Just flash stock boot.img

RokCruz said:
Just flash stock boot.img
Click to expand...
Click to collapse
As a rain check, as I am new to this, and don't want to screw up more,
You mean I can use this method-
Restore OnePlus 7/7T/7T Pro to Stock via Fastboot Commands - DroidWin
to flash the latest stable build on OnePlus support, i.e. this-
https://otafsg1.h2os.com/patch/amaz....P.35_OTA_0350_all_2103221240_3e944b9d067.zip(OnePlus7Oxygen_14.P.32_OTA_032_all_2101280019_b2a62765ba0c485e.zip)
??
Or do you suggest to use the Android 11 firmware available on XDA?

saurabh_op7 said:
As a rain check, as I am new to this, and don't want to screw up more,
You mean I can use this method-
Restore OnePlus 7/7T/7T Pro to Stock via Fastboot Commands - DroidWin
to flash the latest stable build on OnePlus support, i.e. this-
https://otafsg1.h2os.com/patch/amaz....P.35_OTA_0350_all_2103221240_3e944b9d067.zip(OnePlus7Oxygen_14.P.32_OTA_032_all_2101280019_b2a62765ba0c485e.zip)
??
Or do you suggest to use the Android 11 firmware available on XDA?
Click to expand...
Click to collapse
You can do it with the fastboot zip but you need to download all the firmware, in some threads you will find the stock/rooted boot.img from stable and OB, I shared both in this message
RokCruz said:
If you ended with a blinking TWRP just flash the stock/rooted boot.img if you are using stable you can obtain it here(Post in thread 'Android 11 Release - Finally!' https://forum.xda-developers.com/t/android-11-release-finally.4251267/post-84717089)
Or if you are on a Open Beta here: Thread 'OxygenOS Android 11 Betas (OnePlus 7 Pro) released (Open Beta 4 now available)' https://forum.xda-developers.com/t/...o-released-open-beta-4-now-available.4221067/
Click to expand...
Click to collapse

RokCruz said:
You can do it with the fastboot zip but you need to download all the firmware, in some threads you will find the stock/rooted boot.img from stable and OB, I shared both in this message
Click to expand...
Click to collapse
I am pretty sure I know my OS, but is there a way to find out?
I was running the stable, but flashing stock boot just led me to a boot loop with the Original Recovery, it's giving me options to
1. Wipe data and cache
2. Reboot to fastboot
3. Reboot to recovery
The fastboot flash commands above to flash stock OS didn't work, due to one error or another.
Anyhow, I had read somewhere fastboot continue works(here: it wasn't working before for me), so I tried that again, and now I am just stuck on 1+ Fastboot screen. I will wait it out to see if it boots into system.
Otherwise, I am thinking I reload fastboot and flash stock boot just like I did- and from there wipe data, but what do I expect then??
The way I see it, I am just stuck in some serious boot issue, and might eventually have to go down the path of msndownloadtool, any suggestion?

saurabh_op7 said:
I am pretty sure I know my OS, but is there a way to find out?
I was running the stable, but flashing stock boot just led me to a boot loop with the Original Recovery, it's giving me options to
1. Wipe data and cache
2. Reboot to fastboot
3. Reboot to recovery
The fastboot flash commands above to flash stock OS didn't work, due to one error or another.
Anyhow, I had read somewhere fastboot continue works(here: it wasn't working before for me), so I tried that again, and now I am just stuck on 1+ Fastboot screen. I will wait it out to see if it boots into system.
Otherwise, I am thinking I reload fastboot and flash stock boot just like I did- and from there wipe data, but what do I expect then??
The way I see it, I am just stuck in some serious boot issue, and might eventually have to go down the path of msndownloadtool, any suggestion?
Click to expand...
Click to collapse
Flashing the stock boot.img should be enough to boot into system without problems because TWRP can't decrypt data in android 11.
In this point you can try a factory reset from stock recovery this will keep device files but will erase all your config and apps
To figure out what version of firmware you had you can run this command in fastboot
Fastboot getvar all

RokCruz said:
Flashing the stock boot.img should be enough to boot into system without problems because TWRP can't decrypt data in android 11.
In this point you can try a factory reset from stock recovery this will keep device files but will erase all your config and apps
To figure out what version of firmware you had you can run this command in fastboot
Fastboot getvar all
Click to expand...
Click to collapse
Flashing didn't work to boot into system, I was just getting stuck in the Recovery boot loop, it finally booted into system once I wiped my data(files, music, etc -option);
I did try factory reset, only once I cleared the partition, did the boot loop give way to boot into system;
It booted back to Android 11, but it's all glitchy: Boot taking too long, WiFi not switching on, Call not working, Data is working though- basically it's very screwed up, got a couple of errors too- it's like watching an amnesiac old person.. if you get the gist.
So, now I am considering a stable build from Oneplus support website as a local upgrade and booting back to that..
I am hard pressed for options, let me know if you think something else works better, thanks!

saurabh_op7 said:
Flashing didn't work to boot into system, I was just getting stuck in the Recovery boot loop, it finally booted into system once I wiped my data(files, music, etc -option);
I did try factory reset, only once I cleared the partition, did the boot loop give way to boot into system;
It booted back to Android 11, but it's all glitchy: Boot taking too long, WiFi not switching on, Call not working, Data is working though- basically it's very screwed up, got a couple of errors too- it's like watching an amnesiac old person.. if you get the gist.
So, now I am considering a stable build from Oneplus support website as a local upgrade and booting back to that..
I am hard pressed for options, let me know if you think something else works better, thanks!
Click to expand...
Click to collapse
I guess msmtool it's the best way to restore your phone, remember that msmtool will re-lock your bootloader so if you want root you need to unlock your bootloader again.
Use msmtool and instructions form Here(there's an android 9 and android 10 for Global and Europe versions, use android 10)

RokCruz said:
I guess msmtool it's the best way to restore your phone, remember that msmtool will re-lock your bootloader so if you want root you need to unlock your bootloader again.
Use msmtool and instructions form Here(there's an android 9 and android 10 for Global and Europe versions, use android 10)
Click to expand...
Click to collapse
My model is GM1901, in support intro for the link you provided, that's not included?

saurabh_op7 said:
My model is GM1901, in support intro for the link you provided, that's not included?
Click to expand...
Click to collapse
Wait GM1901 is a OnePlus 7(non pro) right?

RokCruz said:
Wait GM1901 is a OnePlus 7(non pro) right?
Click to expand...
Click to collapse
Yeah.. ?

saurabh_op7 said:
Yeah.. ?
Click to expand...
Click to collapse
This is the OnePlus 7 pro forum so, I assume you was a 7 pro user, now all makes sense you don't flash the correct boot.img for your device so all woes wrong.
You need to use msmtool from Here

RokCruz said:
This is the OnePlus 7 pro forum so, I assume you was a 7 pro user, now all makes sense you don't flash the correct boot.img for your device so all woes wrong.
You need to use msmtool from HereI
Click to expand...
Click to collapse
Yeah man, I realised.. anyway, I flashed the boot image from Xda for OP7.. nevertheless, mom tool it is.. thanks..!

RokCruz said:
This is the OnePlus 7 pro forum so, I assume you was a 7 pro user, now all makes sense you don't flash the correct boot.img for your device so all woes wrong.
You need to use msmtool from Here
Click to expand...
Click to collapse
Hey, I am on Mac, I see that Msm is windows-specific.. any way out?

Update: I have been roaming around the corridors of this forum since about a week now. Thanks @RokCruz !!
Finally, used msm tool, although I suspect I still had the option of flashing TWRP and Magisk as I had access to phone and fastboot, but the system was super glitchy.

saurabh_op7 said:
Hey, I am on Mac, I see that Msm is windows-specific.. any way out?
Click to expand...
Click to collapse
I guess that the only way is using the fastboot ROM

RokCruz said:
I guess that the only way is using the fastboot ROM
Click to expand...
Click to collapse
Any idea if we're gonna get one soon?