Database Info

Google Nexus One Pure Crystal Slip?

Anyone used this case? I REALLY don't want to put a case on my Nexus One, but it's also so slim and thin that I am going to drop it eventually.
Silly as it is, I don't want the whole phone covered up, so while the Innocase Surface II looks decent it also covers up the phone.. The Boxwave Pure Crystal Slip doesn't, but I can't find any reviews on it.
Anyone used one of these things? I don't use the dock, although I do use a horizontal belt case so I might have to get one that's slightly bigger as the N1 barely fits in the existing one, but I can deal with that.. That would happen for any case honestly, except for a skin.. I do like Best Skin Ever, but the last two I've bought seem to not be quite as "tacky" as the first few I had, therefore the grip wasn't quite as good. Maybe my imagination..

I bought the Boxwave case off amazon a month ago probably. its a nice case but save your money and buy a resin case from dcmugen on ebay, exact same thing with a different logo. its a nice case though, not too thick and easy to take on and off (I use both docks) so it fits my needs quite well.

Boxwave here. Nice thin and classy. Has rubber feel but not too soft either. It's a pretty good case makes phone look ten times better in my opinion. Is easily recommend it, but I don't use docks, so can't help there. Never the less, happy casing.

DC Mugen FTW. eBay - Epik Case. I got two cases for $8 including shipping and two screen protectors.

check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)

stiCk.E said:
check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)
Click to expand...
Click to collapse
Ah, I see.. I still think I prefer the Pure, no patterns on it, but otherwise the same.. Looks like Boxwave has the Cyclone (circle patterns), diamonds, a matte finish, some others..
Still haven't decided on which case.... I've always been disappointed in silicone cases, but I've almost always bought cheap $2 eBay ones..

I went with the Boxwave Pure Crystal Slip, we'll see when it arrives! God knows when, I had two shipping options.. 5-10 days ($2) or 1-3 days ($23!!)
So I'll see in 5-10 days

I got the Clear Pure Crystal Slip yesterday. Here's a quick review:
Overall, I like it and will likely use it when I'm out and about. It gives a much more secure grip on the phone without adding any weight or feeling larger. Although honestly I still think the Nexus One is a little TOO thin and a little slippery. This makes that better.
It feels like a cheap case, it's rubbery and smooth. If your hands are wet or oily it might be MORE slippery, don't know yet. In reality it seems pretty well made, and fits well. The Clear Pure version is crystal clear, no tint, no patterns, and you can clearly see the phone is a Nexus One.
I'm not doing any drop testing, but I think if the phone landed on a corner or an end this case could protect it. It's firm but pliable, not squishy like a silicone case and not a hard case. Primarily I think it'll protect it because it'll be LESS LIKELY to get dropped because the surface is a tackier and more surface area on the sides. I can pick up the phone with two fingers securely now, where before I'd have to tilt the phone up and get fingers under it to pick it up.
If anyone wants pictures I can do that, haven't yet...
Price summary: If it were $15 it'd be a deal. $20 seems too much.
Pros:
You can see see it's a Nexus. Google branding, colors, body build
It's thin, firm, and fits tightly
Covers up the power and volume buttons, but made to fit over them. Maybe a little rain resistance?
Adds better grip, more confidence holding the phone
Does not interfere with any ports (except a little on the power plug, see below)
Does not interfere with any openings (speaker, mics, camera, camera flash)
Does not interfere with the screen, particularly near the edges
Does not obscure the speaker when phone is on its back
Lets you lay the phone down face-down without resting on the trackball
Covers all corners, edges, entire back.
Cons:
It has a molding line all around it.. It's not that visible but you can feel it. Sides aren't smooth
Covers up the power and volume buttons, but made to fit over them. Makes it too easy to hit the buttons, and you can't feel the button very well (to feel it when touching) nor feel the action of the button itself.
Seems to make the stock charger plug (maybe others too) not feel "in", I think there's too much material around the plug
Takes away the nice texture and feel of the Nexus One
Thumb hits the case a little scrolling down on the trackball, but it doesn't make it harder to use
Other notes:
Does not protect the camera lens or the screen at all
Mine was clearly used, fingerprints all over and in the box backwards :/
A slim belt case intended for the N1 is too small to fit with this case
There is a weird cutout to the left of the HTC logo in the case, like maybe a hand strap could go there?

akifbayram said:
That case does look nice but 20 dollars seems a bit excessive. Look at other Amazon items. I found one for 5 dollars shipped that is pretty similar and doesn't have the hole in the back. http://www.amazon.com/Google-Crysta...X1DSC0SAJ94E&s=generic&qid=1275242975&sr=1-27
Click to expand...
Click to collapse
I have that case as well as the Crystal Boxwave slip.
The Boxwave one:
- Is clearer obviously (not the "smoked look").
- Fits a good deal tighter.
- Has a full cover for the lip, not the chin strap method of attaching.
- Has Boxwave written across the back.
I actually prefer the patterned one because it's more interesting, both detract from the Nexus, so it might as well add some flavor, right? The Boxwave one is far tighter fitting (and slightly thinner) but neither is going to come off in any kind of normal use. I also own the desktop dock, so I need to take it off on occasion to allow the phone to fit. Both cover all the buttons, so you have to get used to pressing them through the rubber. They also both have that edge around the edge of the case from being molded.
Anywho, just my $0.02

akifbayram said:
Speaking of 2 cents...there are a lot of auctions for the patterned Nexus One cases for 99 cents. http://stores.ebay.com/Cimo-Cases_G...15QQ_sidZ192097565QQ_trksidZp4634Q2ec0Q2em322 I wish I knew about this before
Click to expand...
Click to collapse
And those are probably worth at least $1.10...... Sometimes you really have to make a minimal investment to get something useful.

Case Review: Cruzer Lite Androidified TPU Case

Hey guys, just got some awesome looking Android cases, so just wanted to share my impressions. I actually haven't seen any companies make a case like this yet, so I thought it was pretty cool.
First off, these cases look outstanding. The Andy the Android graphics on the case are really slick and give the phone a very stylish look. It's a bit more subtle on the smoke colored case, but it definitely pops on the blue case.
I previously owned a generic black TPU that had straggly edges, uneven cutouts, and inconsistent molding. Compared to this case, the Androidified case is noticeable cleaner. The Androidified case is cleanly cut, and has a consistent smooth molding. It's also tight and form fitting, which makes it bit hard to put it on the first time. But once you get it on, you can see that it conforms to the phone perfectly. The inside edges are a bit sharp, but I think it helps the case lay flat on the surface of the phone.
As far as protection goes, it's pretty much the same as other TPU cases go. It provides great protection against everyday scratches and small drops without adding a lot of bulk to the phone. I accidentally dropped my phone from my desk a few days ago without any scratches or cracks. The case also rises above the screen so that if you were to put it face down, the screen would be elevated from the surface.
There are cutouts for the micro-usb port, microphone, headphone jack, hdmi port, speaker, and camera. The power button and the volume rocker are covered, but have a button on the outside and is indented on the inside for easy access. This was actually a source of frustration for me on the generic TPU case, the button on the outside wasn't well defined and was hard to find at times. Along with a poorly finished side, there were times where I would mistake an unfinished edge for the power button. Thankfully, the smooth finish of the Androidified cases make this a non-issue.
Overall, I'd recommend these cases if you're looking for a stylish protective case that won't add much bulk to your phone. For $12.99, they are cheaper than the ones you'll find at Verizon, so I think it's definitely worth it. I got these at Amazon (my review is there too).
I also attached pictures of the smoke and blue Androidified cases vs the black generic TPU cases.

These cases are definitely great! the owner of the andriodify cases is a stand up guy who's all about introducing stylish quality produces at an afforable price.

Does this case have a cutout for the secondary microphone on the top? I really hope not because then I'll need to cut a tiny hole in the top of my case(already ordered one) :[

blarrick said:
Does this case have a cutout for the secondary microphone on the top? I really hope not because then I'll need to cut a tiny hole in the top of my case(already ordered one) :[
Click to expand...
Click to collapse
Did you mean you really hope so?
My bad though, I had a bunch of pictures, but I must have not uploaded one with the top view. Yes there is a cutout for the mic on the top.

immaage said:
Did you mean you really hope so?
My bad though, I had a bunch of pictures, but I must have not uploaded one with the top view. Yes there is a cutout for the mic on the top.
Click to expand...
Click to collapse
Lol yes that's what I meant, and thanks a lot that relieved my only worries about this case :]

Case Problems...
The Case is all right but the one from Verizon fits better and the buttons are easy to press. With this case the camera doesn't line up and it is terribly hard to press the volume rocker and power button...very depressing as I love the style of the case.

Boomwaller said:
The Case is all right but the one from Verizon fits better and the buttons are easy to press. With this case the camera doesn't line up and it is terribly hard to press the volume rocker and power button...very depressing as I love the style of the case.
Click to expand...
Click to collapse
I haven't received mine yet but if it's that bad I'll probably end up cutting them out myself, sure it's not going to look incredible but everything else about this case seems great, not sure why they'd ever think covering the power/volume buttons would be a good idea...

Agreed
blarrick said:
I haven't received mine yet but if it's that bad I'll probably end up cutting them out myself, sure it's not going to look incredible but everything else about this case seems great, not sure why they'd ever think covering the power/volume buttons would be a good idea...
Click to expand...
Click to collapse
Yea that's what I ended up doing was cutting them out it looks great other then my craftsmen skills lol, but it works a whole lot better now.

I'll be doing my own review of these cases too...maybe not on xda, as there is one already. As far as the buttons on the side are concerned, I did notice that they were a little hard to press at first. However, after using the case for more than a week or so the buttons are much easier to press; I guess they just had to be broken down some. I bought both the green and the smoke one, and they are both great!

The graphics on these are pretty nice...

I got one of these as well.
Yeah, the side buttons are a bit hard to press, but it gets easier with practice and the case seems to break in a bit as well over time. The first time I put it on it wasn't aligned properly, but every time I've taken it off and put it on since then it seems to get a little better.
My only real complaint is that a) it doesn't fit in the media dock, and b) when I take the case off to put the phone in the media dock it often pulls the plastic back off with it (I just need to be more careful in the future).

Coming from one of the generic TPU cases that I purchased on ebay, the covered buttons on the Androidified case was much better and easy to press.
In regards to the media dock, that must apply to cases in general right? I can't really see it fitting on a media dock if you have a case on it.

Yeah, correct. No case will fit in the dock.

no link to where to buy these from...?

frogdod said:
no link to where to buy these from...?
Click to expand...
Click to collapse
You can find them by searching androidified on amazon

I got the red one with argyle pattern. It is a PITA to push the power and the volume buttons. So I guess not all TPU cases are made equal. I ended up cutting a cutout around the power button. Problem solved. And also around the USB port since some of the generic charger connectors that I have are too big to fit through the USB cutout on the case.
That being said, the Curzer Lite TPU case that you have, is it the same as the one that Verizon has in their stores? I think somebody wrote the Verizon's Charge TPU case has the best power button cover (and I can almost vouch for that having had Verizon's TPU case on my Droid X) but I'm not positive.

I have the Cruzerlite Androidified case and it is almost the same as the Verizon one but it has the android pattern. Cruzerlite also makes the Argyle pattern and they are about half the cost of the Verizon OEM ones

It's a decent case...good protection from small drops and looks fairly cool. I can't get the top around the screen to stay uniform, so the fit could be better. I'll give it a 4/5 and 4.5/5 on value. I'll be waiting on the Case-Mate Barely There!

Not diggin this case anymore. Hard to get off without batt door coming with it. Much sleeker without the extra size...hoping casemate puts out a barely there soon.
If anyone wants it...$10 paypal gets it shipped to your door. (Blue as pictured above)

Revolution case by Poetic Review

Poetic offered me to review their case, and they sent me one completely free. I want to thank them first for this kind offer.
To begin with design;
Quality of material is really good.
It looks great :good:. Compared to the other armor cases i saw, Revolution has a cool and better looking design for sure. It does not make your phone like old army satellite phones like others.
Cuts are precisely aligned. It has cuts for both mics on top and bottom.
The stand on the back offers great functionality , also adds a good-looking detail to back side.
It offers a better grip on the phone.
Field of profession: Protection
Nothing much to say really. For sure one of the best. Case feels really solid.
Also has dust protection caps on usb and headphone ports. It really gives you confidence about drop protection. I feel like a dont need do worry about dust or dropping my phone anymore.
Cons:
As a natural downside of this high protection, phone feels a little bit bigger and thicker.
I think it is hard to put the phone to the case and back off(Maybe there is an easier way than I did). But if you need this kind of protection I guess you dont need to do it often.
To conclude:
It is one of the best cases offering that much protection also with an elegant design. Feels solid and durable, no worries about dropping. If you need that much protection, I would definately recommend that.
As a results I give this product 9/10.
Link of the product: http://www.amazon.com/Revolution-Protective-Landscape-Absorption-Resistant/dp/B013A1JEI4/ref=sr_1_1?srs=10167778011&ie=UTF8&qid=1449783452&sr=8-1&keywords=s6+edge+plus+revolution

Very nice and interesting! Good work!

DBase2 said:
Very nice and interesting! Good work!
Click to expand...
Click to collapse
Glad you liked it

I'm pretty sure this is the ugliest design possible. Wouldn't put it on my phone if they paid me.

It seems too big to be good for daily use
Sent from my HTC D820us using Tapatalk

Protection vs Convenience!
I got one too for the review! Here's my list of pros & cons:-
Pros:-
- Protection
When they say protective case, I didn't realize they literally meant every letter of it! This shell is so damn hard, I can beat the **** out of a mugger if it ever comes to that. I'm pretty sure even if I drop the phone on the ground from the first floor, nothing will happen to the phone unless the screen hits directly on some elevated object. So I'll give it a thumbs up on protection category. The case is damn solid! The brand also claims that the case is shock resistant, although I didn't get a chance to test it out myself (or may be I don't want to find that out). The case also covers the volume rocker and the power button with its own tactile buttons.
- Dust Resistant
Putting the case on is quite a challenge, however once done, it doesn't leave much space in-between the case and the phone itself. The USB Port and the 3.5mm Audio Jack has a dedicated pull-up flaps which are easy to open and close. So, overall, it has some dust protection too.
- Excellent Grip
The case is built with some reinforced TPU (or similar material) with texture on the sides which provides excellent gripping to the holding hand. Even if you drop it, doesn't look like it's gonna make any difference anyway!
- Built-in Kickstand
Not just the case, even the built in kickstand is made of metal and it definitely feels solid unlike some lousy kickstands which come with many other cheap cases. So you have the power kick it out and enjoy movies/videos (or games if you use a gamepad) anywhere you want.
Cons:-
- Size
Huge! That's what it is. Edge+ is already hard for some to handle it with one hand but putting this cover on, it becomes almost impossible for them to operate with one hand. It widens the phone by atleast 1.5-2 cms.
- Weight
With power comes responsibility. Similarly, with protection comes additional bulkiness! At 90 grams (3.2 ounce) this is the heaviest case I've ever used. At 153 grams ( 5.4 ounce), Samsung Galaxy S6 Edge+ is one of the slimmest and lightest phablets in the market and this case would put that to complete shame!
- Case On/Off
With my Gear VR, I need to take off my phone's case every now and then! With this case, that's not happening. It took me almost 15 minutes (first time and the only time) to put this case on. Trust me, it's damn hard to pull out the frame ( the plastic bumper) from inside the case and putting the phone inside is even harder! Though once done, it's definitely protected! Now, taking off the case is another challenge!
- Buttons
Due to this reinforced TPU material, the buttons on the case are a bit harder than usual. So you might have to use some extra strength when you want to access the power button or volume key, you still get the tactile feedback though!
The Final Verdict
If you work in a harsh environment and your sole purpose of a case is protection of the phone, this case is definitely for you. But if you hands are short or you like keeping your phone in your jeans pocket or you want to show off how cool is that edge display of your phone, this case isn't for you! Check out the HD images for a better view!

First I would like to thank Poetic for sending me a free sample to do a review of it.
I received Poetic Revolution case one week ago and I decided to test it for a while before I write a review.
At the first sight I was astonished by a quality of a case, I have never seen case with more details before. I really like its millitary look. I love how all holes are precisely cut out. They are covered with a dust protectors which is really nice. When you hold your phone in this case you are completely sure iz will not slip out of your hands.
I found metal stand really useful especially when I watch movies, have video conversation with my girlfriend or when I cook lunch and cannot hold my phone.
When It comes to protection I am sure it will prevent my phone of taking damage. My son dropped phone on the floor two times and phone survived just very well without cracking.
Cons:
- It is a little bit too bulky (but it is ok as protection is its main role)
- There should be screen protector intergrated in this case
- Every time I insert charger I am afraid to scratch bottom of my phone.
Overall I am keen on this case because it gives best protection to my phone. I love how nice it looks on my phone.
If you want highest level of protection for you smartphone you shoud definitely give it a try:
http://www.amazon.com/Revolution-Protective-Landscape-Absorption-Resistant/dp/B013A1JEI4

I received the Poetic Revolution case as well about a week ago. I wanted to give it a weeks worth of use before giving a review.
Pros
(1) Very well built. This thing is rock solid and the tolerances are super tight. This keeps out the dust and offers great protection from falls.
(2) Great Design... The overall aesthetics of this case are great. You can tell a lot of detail went into designing this case. It's funny to mention but I found the integrated backplate (blue plate) on the inside of the case to be impressive how it's molded into the rest of the case.
(3) It's awesome that they included a kickstand. I miss the days of old when phones had kickstands built into them, but this is a great alternative option since the newer phones don't have the kickstands anymore.
As far as CONS go.... there really aren't any that I could find. I did have a couple annoyances that I'll list below but these are subjective of my own opinion and shouldn't be viewed as a flaw in the design or a need to change it in any way, just a couple suggestions that would make "myself" like the case even more...
(1) Not a fan of the caribeaner loop... I get why it's there, and could be useful to some, but I feel like I'd just want to get some snips and cut it off... I wear baggy pants and can still fit this big case/phone in my pocket, however that caribeaner loop would catch on my jeans and just constantly annoy me. A minor hindrance, but I'd prefer it without the loop.
(2) I noticed the kickstand would "tap" against the backside of the case. This would be a little annoying were there any vibrations going on. For instance when my phone is in my car dock stand, the vibrations from the car/road would make this rattle ever so slightly. My suggestion, integrate some sort of rubber/silicon surface just under where the kickstand meets the backside of the case.
Final thoughts....
This is a great case that would definitely protect your phone had you dropped it, or are in a harsh environment. The design is eye-catching and worthy of the newer era of smartphone cases. The kickstand feature is a definite plus, and even though I am not a fan of it, I could see how the caribeaner loop would be useful for the outdoorsman or a construction worker.

I received my Revolution case from Poetic over the holidays (thank you guys).
The first thing that I noticed was the build quality!! It's amazing guys. You won't be banging up your phone with this case protecting it!!
All of the cut outs are very precise. The case has dust flaps to cover the charger and ear phones sockets. The case is a two part case that you take the rubber inner out and after fitting the phone into it then you put the outer tougher part on. It does add a little size to the phone but it's going to protect it from and mishaps. After all...protecting a phone that costs more than most gadgets out there is the main thing. I have used it now for a couple of weeks and I must say that when you buy a Poetic Case you're buying the best.
I am a proud owner of two different cases from Poetic and I promise you that one you try you will always buy from them.
I only found one slight hindrance and that's the kickstand. After a day or two it seems have become a little loose and taps and rattles. I just placed a tiny piece of blue tac under it to keep it closed.
Please try these cases from Poetic guys...I really speak highly enough!!!
Sent from my SM-G928F using Tapatalk

I have been using the Poetic Revolution case on my gold Galaxy S6 Edge+ for about a week and a half
now. Here are my thoughts.
When looking for a rugged case, the Poetic Revolution marks off every box, and then some. This is one
of the best, and toughest cases I have ever seen. When not at work, I need a case like this for my phone.
Hiking, camping, car shows, at the lake, my kids and I are always outside. I have 2 young sons, with this
case on, I am not concerned if they grab my phone and throw it around. I have an 85 pound puppy that likes to chew. Thankfully he has never gotten a hold of my phone, but I feel confident this case would protect it.
When receiving this case, I thought it was going to be all black, but it was not. It is black with very dark
brown accents. I personally liked this as it makes the case stand out more, but in a subtle way. I also
think it makes the case look really good with my gold phone. I also really like having the port covers.
While out on the sand rails and quads out in the desert, they keep the dirt out. When you are at home
with your phone on the counter, they can keep them covered long enough for you to save your phone
should something get spilled.
I have seen where some people have said that this case is very difficult to take on and off, however, I
do not feel that way. Is it more difficult than just a thin snap on case? Of course, but I have no concern
that this case is coming off my phone if it gets dropped. I have used cases that go on and off in the same
way in the past, and I prefer them. The way it’s made, it is thinner than an Otterbox type case, but in my
opinion stronger because you don’t have 2 plastic pieces snapping together.
The kickstand on this case is also among the best I've seen. In my experience, most kick stands are
made from a cheap material, or even if they aren’t, they pop out of the case so easily the little nubs that
are used to snap it into place break. Not here, where it is very tactile in extending it to use it, but it will not pop out of the case on you. One other benefit is that I have been able use it both horizontally and vertically.
When it comes to the loop at the top, I could go either way. I would be happy with a case that did not have it, but I think it could also be more useful with some minor improvements. If I am just hiking, I feel confident when hooking it to my backpack. However, when out riding in the desert, I do not feel that it is strong enough to hook on to my keys or someplace similar. If it kept the loop, I would use it more if it were reinforced with a harder material. Either way, I think this was a good idea to separate their case from others.
Though I was pretty sure they would not work, I did test both wireless charging and Android Pay (NFC) with this case on, and neither worked. This was not a big deal for me as I do not use Android Pay much, and I only wirelessly charge at work, where I can just take the phone out of the case if need be.
This case was provided to me by Poetic for my honest opinions. For the price of this case (currently $19.95 on Amazon), it is superior to cases costing twice as much. Though this is my first Poetic case, it will not be my last. I was so impressed with this case that I recently purchased a Poetic case for my Galaxy Tab A after the old case was chewed by above mentioned puppy.

Looking great will definitely try it soon.
Sent from my SM-G928G using Tapatalk

Poetic Affinity Case review

Okay so I am sure a lot of you have received Galaxy Note 7 by now as I am. (T-Mobile user) I would like to update on the case I have with this beast with pictures and hopefully help some of you out there looking for a good case.
I think the blue coral color on this case is beautiful!
Poetic brought their famous Affinity series case for Note 7 in a perfect time for the phone's release and they came back with near-perfect case. Well, the word perfect is very subjective, but if you are like me who is always looking for light, thin, see-through material (to show off the Blue Coral color of my Note 7), sturdy and protecting four corners of the phone, you will absolutely love this. And plus, this time, they fixed two imperfections that I have talked about for a while on this case and I will mention them in the end.
Look - Superb
Honestly, I do not like thick cases where you can't appreciate the thinness of your phone for the sake of phone's protection. To me, phone's design is very important as I have with me all the time and I hate to see the beautiful designs (ex. Galaxy Note series, Iphone series...) to be later covered by ugly bulky cases once you have it. Affinity case makes their case cover very unique and they do it with high quality material. As you can see from the pictures, most of cases are see-through polycarbonate material where you can still enjoy your phone's natural color. From the four corners, they connect each corners with soft shock-proof TPU material that will cover the back of the phone very minimally and with unique pattern that they call X-FORM. I also like their logo with silver color in the middle of back.
Protection - Excellent
Like mentioned above, they covered the four corners with X-FORM soft shock-proof TPU material that feels VERY sturdy. If you think of cheap chinese import TPU material, you will have to see/touch to feel difference. Once you feel/touch it, you won't worry about four corners anymore. Also, TPU material (including strips around back and corners) are scratch proof so you wont see ugly scratches. Most of back is polycarbonate, which is plastic. First, I worried about the back portion being easily scratched due to the nature of its material, but I found out that is not the case. The strips that run through back of the case are actually RAISED so it doesn't get scratched much just like most cases front sides are raised to prevent any normal wear-tear scratches from everyday living.
However, if you happen to carry your phone in an enviornment where lots of sharp materials flying around your phone, you may be better off going with more less-plastic, rigid material of other Poetic product line.
Added feature - Superb
As you can see with my pictures, this case has anti-slip side grip on each sides and this gives me such a relief. I tend to drop phone quite often and not only I need a case with good protection, but also this kind of added feature that will help me not to drop as much. Also rugged TPU strips on the back and corners help a lot as well.
Holes/Cuts - Superb
Their holes/Cuts/Buttons' positions are perfect and I cannot say any better than that. One of the imperfection this case had in the past was a little hard buttons. To me, it seemed like it requires a bit more pressure to press buttons and it was discomfort in the beginning. (You get used to it soon so it doesn't bother much later) However, they fixed it this time and it is breeze and actually fun to press them. They listened to their customers and that is a rare thing in the market. I love it!!!
Taking off the case - Awesome
Last imperfection I probably thought it would have been very hard for any owners with battery changeable phones was taking off the case. I departed from the phones with battery changeable ability a while ago so I did not have to take it off that often so it wasn't a big issue, but nevertheless, when I do need to take it off, it wasn't a pleasant experience. It was too tight to prevent any fall off from dropping your phone.
However, they fixed it, and they did it perfectly. Now, you don't have to put much pressure to take it off one corner to the other. A little bit of force and it comes off easily. It is very good that it holds the phone steadily with you worrying about it falling off on its own, but when it needs to be taken off, it does VERY easily. I seriously recommend to anyone who is looking for a case with thin, see-through, protective, good design and good features, look no further, this is the case for you.

jkforce said:
Taking off the case - Awesome
Last imperfection I probably thought it would have been very hard for any owners with battery changeable phones was taking off the case. I departed from the phones with battery changeable ability a while ago so I did not have to take it off that often so it wasn't a big issue, but nevertheless, when I do need to take it off, it wasn't a pleasant experience. It was too tight to prevent any fall off from dropping your phone.
However, they fixed it, and they did it perfectly. Now, you don't have to put much pressure to take it off one corner to the other. A little bit of force and it comes off easily. It is very good that it holds the phone steadily with you worrying about it falling off on its own, but when it needs to be taken off, it does VERY easily. I seriously recommend to anyone who is looking for a case with thin, see-through, protective, good design and good features, look no further, this is the case for you.
Click to expand...
Click to collapse
THX for the very thorough review! :good:
I'd held off on pre-ordering this case for the latter,as on the HTC 10,this case was extremely difficult to remove,to the point where you could damage the phone if you're not paying attention,either by bending the phone,cracking the display,or,damaging the camera lens while gripping for case removal.
It was so bad that I actually made relief cuts on each corner,on the diagonal,to facilitate ease of removal.
This in no way compromised the snugness of the case,so,I suspected a design/engineering change was in-store for future versions of the Affinity case.
Glad to hear the changes were made,I just ordered a Clear/Black version for my Black Onyx Note 7.

KOLIOSIS said:
THX for the very thorough review! :good:
I'd held off on pre-ordering this case for the latter,as on the HTC 10,this case was extremely difficult to remove,to the point where you could damage the phone if you're not paying attention,either by bending the phone,cracking the display,or,damaging the camera lens while gripping for case removal.
It was so bad that I actually made relief cuts on each corner,on the diagonal,to facilitate ease of removal.
This in no way compromised the snugness of the case,so,I suspected a design/engineering change was in-store for future versions of the Affinity case.
Glad to hear the changes were made,I just ordered a Clear/Black version for my Black Onyx Note 7.
Click to expand...
Click to collapse
I feel you 100% as I had HTC 10 with this case as well as LG G5 and it was pain to take it off, especially on HTC 10 as you mentioned. But, it is a night and day difference now.

Is this available for purchase yet? Only place I'm seeing it available is ebay and I'm not sure if those are third party knockoffs or not.

turbomalum said:
Is this available for purchase yet? Only place I'm seeing it available is ebay and I'm not sure if those are third party knockoffs or not.
Click to expand...
Click to collapse
I can assure you, the ones on eBay aren't going to be knockoffs. The design is too intricate to bother with imitating & risking the backlash from buyers. The volume of sales isn't gonna be high enough to warrant anyone to make a knockoff.
Besides, you're protected against fraud/etc. by eBay &/or PayPal.
If you're still not convinced, you can purchase direct from Poetic or go to Amazon.

I've got the same case although my phone hasn't arrived. It's ok imo, the black plastic design on the back protrudes and trends to not feel great in my palm imo but if you don't mind that I guess it's a nice thin case. Well probably rock this until I get a replacement
Sent from my SM-N910F using Tapatalk

I also have this case, but I am bit scared to out it on since I fear the hard plastic might scratch my phone on back. I was thinking that there is going to be some sort of cushion or enough place between them. Any comments??
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app

amith007 said:
I also have this case, but I am bit scared to out it on since I fear the hard plastic might scratch my phone on back. I was thinking that there is going to be some sort of cushion or enough place between them. Any comments??
Click to expand...
Click to collapse
Yeah,use a liquid sealer & a clear/matte body skin (in addition to the Affinity Case) for extra protection,without sacrificing the looks of the phone:
https://www.amazon.com/SGLSTABLET-K...7_1?ie=UTF8&psc=1&refRID=WNZDASE9MGT6VPCS3R3W
http://www.skinomi.com/samsung-galaxy-note-7.html

@jkforce
The Poetic Affinity Case for the Note 7 is everything you described/stated in the OP of this thread,so much that I almost regret buying the OEM Samsung Leather Case.
Both have a great feel/look/functionality,but the Poetic shows off the phones good looks & the clear w/black trim on Onyx Black looks as if it shipped from the factory w/the design,akin to a Note7 Active,if you will.
A strong recommend here & @ $7.95 shipped on e-Bay,it's an inexpensive case to add to your rotation.

Bumper-only Case?

RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.

I've got one and I agree that the volume buttons are too stiff. I had to play / force them in and out with my plastic card holder edge to soften them a bit.
The lateral part are not that "firm" around the phone so unfortunately it feels a bit flabby.
It still makes the phone bulky, but according to one YouTube video where the guy toss the phone very high a few times without the phone being damaged at all, the protection is REALLY good.

roaduardo said:
RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.
Click to expand...
Click to collapse
I meant to do a review of the rhinoshield to warn everyone how awful they are. I had the exact same esperience as you and to add insult to injury, when I contacted the company to voice my concern they wanted me to ship it back with me paying for the shipping and would only accept it if it was BRAND NEW WITH NO SIGN OF WEAR. Really? Very bad customer service and crappy product..
Sent from my SM-N960U1 using Tapatalk

eurominican said:
I meant to do a review of the rhinoshield to warn everyone how awful they are. I had the exact same esperience as you and to add insult to injury, when I contacted the company to voice my concern they wanted me to ship it back with me paying for the shipping and would only accept it if it was BRAND NEW WITH NO SIGN OF WEAR. Really? Very bad customer service and crappy product..
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
That why I bought that case from Amazon. Can't beat Prime.

I had Rhino bumper on SGS7, totally agree with you. Hard buttons and slipery material. My buttons chopped off after almost a year of wear and tear.
My gf is using Ringke Fusion (clear back case) + dbrand skin. It looks beautiful so I ordered same case for Note9 + dbrand skin. It looks much better with lighter skins. Darker skins looks great when there is enough light around you. In low light it acts almost like a mirror.
https://imgur.com/QTYcakg
No way I go back to Rhyno again. It's not bumper case but I don't mind to flip it over and show camo skin

roaduardo said:
RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.
Click to expand...
Click to collapse
The only way you can fix the button issue, is get an Stanley blade and cut the sides of the button.. So the top and the bottom of the button is the only place where the plastic is connected.. Then they will be so easy to press!

I did that on my case on day 2, it helps but I wouldn't say it is enough. At the end, when my Rhyno bumper buttons wear I even tried to cut them out and flatten the area around button. I've got choped case with holes where buttons are placed and it was bad experience. Hard plastic, rough edges, not easy to dig and not pleasant to fingers. Too bad, unfortunately, I've used cases on same phone (sgs7 like I said) with much more tactile buttons so I gave up on Rhyno.

N1NJATH3ORY said:
The only way you can fix the button issue, is get an Stanley blade and cut the sides of the button.. So the top and the bottom of the button is the only place where the plastic is connected.. Then they will be so easy to press!
Click to expand...
Click to collapse
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?

roaduardo said:
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?
Click to expand...
Click to collapse
I think what’s happened as Rhinoshield get there case made in China, plus they purchase in bulk, there has been a manufacturing defect...
So at the moment Rhinoshield are stuck with the defect stock, I asked the exact same thing they would not answer me.. LOL
Razor blade is your only option! Some user say it works fine others say it dont so it's your call!
Or you can wait until they get rid of this stock and order more stock without defect! But that could be in the note 10 days!
Plus they aren’t telling me when they will get new stock, so I am guessing!

roaduardo said:
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?
Click to expand...
Click to collapse
I honestly don't think I've ever been pleased w/Rhinoshield's bumpers.
I gave 'em a shot only after this design/model from Nillkin disappeared,in the Note 3/4/5 days (guessing you had one) :
Supcase had something similar,but,it's nowhere to be found on devices from the past 2-3 yrs as well.
Anyhoo,I think the problem w/Rhinoshield is their marketing pitch is strength/brute protection & if they pared down the overall width/thickness & eased-up on the button stiffness,they'd fail on that account.
IIRC,I 1st gave Rhinoshield a shot w/the S8+ & found the fit to be way too loose. IDK how the button situation was,as I returned it as soon as I got an RMA.
The exact opposite w/the S9+,a very snug fit,but,the construction lended itself to adding too much width to the grip & the buttons were stiff.
It got little use & I tossed it in the garbage soon after taking delivery.
IDK why no one steps up to the plate & makes a backless bumper that has a decent fit/low profile & usable buttons,or,for that matter,just have cutouts for the buttons.
I get it on the less popular phones,but,I'd think it'd be profitable for at least one mfg (if not Samsung themselves) to make such a bumper for the Galaxy S & Note lineup.
I suppose we shouldn't be surprised,as we've seen feature loss since the good 'ol Note 4 days,the same applies to case variety....................................

KOLIOSIS said:
I honestly don't think I've ever been pleased w/Rhinoshield's bumpers.
I gave 'em a shot only after this design/model from Nillkin disappeared,in the Note 3/4/5 days (guessing you had one) :
Supcase had something similar,but,it's nowhere to be found on devices from the past 2-3 yrs as well.
Anyhoo,I think the problem w/Rhinoshield is their marketing pitch is strength/brute protection & if they pared down the overall width/thickness & eased-up on the button stiffness,they'd fail on that account.
IIRC,I 1st gave Rhinoshield a shot w/the S8+ & found the fit to be way too loose. IDK how the button situation was,as I returned it as soon as I got an RMA.
The exact opposite w/the S9+,a very snug fit,but,the construction lended itself to adding too much width to the grip & the buttons were stiff.
It got little use & I tossed it in the garbage soon after taking delivery.
IDK why no one steps up to the plate & makes a backless bumper that has a decent fit/low profile & usable buttons,or,for that matter,just have cutouts for the buttons.
I get it on the less popular phones,but,I'd think it'd be profitable for at least one mfg (if not Samsung themselves) to make such a bumper for the Galaxy S & Note lineup.
I suppose we shouldn't be surprised,as we've seen feature loss since the good 'ol Note 4 days,the same applies to case variety....................................
Click to expand...
Click to collapse
I'm tempted to try and modify one of Supcase's clear backs but the razor knife that I have doesn't seem strong enough to slice through that kind of plastic because I've tried to modify some other cases I have to create a backless case. It's so, so, so stupid that case makers don't see the benefits of a bumper-only design. It's frustrating for users like me who don't drop their damn phones all the time. I haven't used a screen protector since my iPhone days and my displays have always been great during the time I've had them until I sold/donated them off to another user.
If only I could find some kind of rubber band material that I can wrap the edges of my phone. That's something that these case makers could do. Make rigid edges (with soft, clicky buttons) but top and bottom elastic material so there's a tight fit. Does that make sense? Because getting the phone in and out of a RhinoShield bumper case is difficult. Yet another design issue with their cases.

roaduardo said:
I'm tempted to try and modify one of Supcase's clear backs but the razor knife that I have doesn't seem strong enough to slice through that kind of plastic because I've tried to modify some other cases I have to create a backless case. It's so, so, so stupid that case makers don't see the benefits of a bumper-only design.
Click to expand...
Click to collapse
I've tried modding a few cases where it had a clear distinction from the bumper part of the case & the back cover portion.
Same here,no success,as the remaining bumper didn't have enough rigidity to hold shape.
roaduardo said:
If only I could find some kind of rubber band material that I can wrap the edges of my phone. That's something that these case makers could do. Make rigid edges (with soft, clicky buttons) but top and bottom elastic material so there's a tight fit. Does that make sense? Because getting the phone in and out of a RhinoShield bumper case is difficult. Yet another design issue with their cases.
Click to expand...
Click to collapse
I totally get your design idea.
It's a different take on the 2pc metal bumper design,but,w/o the necessary assembly (screws). Remove the screws from the design,build-in some elasticity on two of the sides for easy removal-installation,yet,still holding shape & retaining edge protection.
That's actually a very nice idea,perhaps you have a friend or two who have some experience w/CAD software & sell the idea/patent/etc.... to one of the case mfgs...................

KOLIOSIS said:
That's actually a very nice idea,perhaps you have a friend or two who have some experience w/CAD software & sell the idea/patent/etc.... to one of the case mfgs...................
Click to expand...
Click to collapse
If only I had the time and resources. I'm happy to see someone else take this kind of thing and run with it so I can just get myself one case. I just need one for my 6T and one for my Note 9. lol

I got the rhino shield bumper, no trouble with the buttons, just not as clicky as I would like. It is also quite slippery and doesn't stay put on the vehicle dash.
With that said, my dbrand grip should be here in a week or so, it is the best case I have had, and loved it on my note 8. They are taking preorders still for shipment in Feburary, so check them out for a bumper style case.
Sent from my Samsung SM-N960U1 using XDA Labs

nuclearrage said:
I got the rhino shield bumper, no trouble with the buttons, just not as clicky as I would like. It is also quite slippery and doesn't stay put on the vehicle dash.
With that said, my dbrand grip should be here in a week or so, it is the best case I have had, and loved it on my note 8. They are taking preorders still for shipment in Feburary, so check them out for a bumper style case.
Click to expand...
Click to collapse
Is it wrong to assume the dbrand grip would be almost impossible to pocket?
I was just about to order the Rhino Shield.

Dbrand is slightly bigger, but very VERY grippy. I wear Duluth Trading Co. Cargo pants and always have 2 phones in the front left cargo pocket.. also fits in my work shirt front pocket. Not sure about jeans or skinny fitting clothes.
Sent from my Samsung SM-N960U1 using XDA Labs

One thing that I really do not like the look of with this case is that there are no raised buttons. The sides of the case appear to be flat, which would make it hard to find the right buttons you're looking for in a pinch or when the phone is inside your pocket or bag.
It's the one thing that's holding me from ordering this case. It looks pretty thick. That's fine but in my opinion if the case is going to be a bit thick you may as well have easily accessible raised buttons on the sides.
I just wish, considering the advancement with 3D print tech, that we could just design our own unique case for our phones. A case the way we want/need it. Like, if I could just have one of Spigen's cases but just the bumper, just the edges and no backing.

roaduardo said:
One thing that I really do not like the look of with this case is that there are no raised buttons. The sides of the case appear to be flat, which would make it hard to find the right buttons you're looking for in a pinch or when the phone is inside your pocket or bag.
It's the one thing that's holding me from ordering this case. It looks pretty thick. That's fine but in my opinion if the case is going to be a bit thick you may as well have easily accessible raised buttons on the sides.
I just wish, considering the advancement with 3D print tech, that we could just design our own unique case for our phones. A case the way we want/need it. Like, if I could just have one of Spigen's cases but just the bumper, just the edges and no backing.
Click to expand...
Click to collapse
It may have different texture for the buttons for us to feel them.
If you scroll a bit the page, you may see it.

dfwfreaks said:
Never like rhinoshield case.
They don't know how to make cases
Click to expand...
Click to collapse
It's CrashGuard #3 for me today. Trying this case out for third time since it's the only viable option today for a bumper-only case.
I followed the advice of some users who suggested using a razor to slice into parts of the volume button grooves in order to make them more tactile. I'm happy to report that it worked pretty well. The buttons are actually registering clicks much easier than out of the box. Just to make it easier, I did the same thing for the power and Bixby button.
The other problem I had with this case is the area around the S-Pen makes it very difficult to remove the S-Pen. It's too small. I have average-sized hands and I have to use my pinky in order to get the S-Pen to eject. So I also modified that area and make some incisions with my razor. Then there's how tight the case can be as you try to put it on so skins can be pushed from the edges as you can see from the photos.
I just can't stand RhinoShield's tone-def response to criticisms to their CrashGuard cases. You have users reporting defective design features and they do nothing but push back with their half-baked suggestions to make their product work instead of correcting their design flaws.
They need to listen and stop deflecting. Spigen needs to also listen to us and give us a bumper-only solution.

dfwfreaks said:
Just get a tempered glass screen protector and D brand skin, bruh.
Click to expand...
Click to collapse
Already had the Dbrand on for weeks and I've never used a screen protector on any Android phone. Last time I used a screen protector was on my iPhone 4s.