Related
Hello!
I'm having quite a hard time figuring out what is happening on my new Oneplus 6.
The first time i flashed LineageOS 16 microg edition it booted but since i tried to restore stock ROM backup with TWRP it all went to hell.
Device immediately bricked, only booting to fastboot.
Had to use msm tool to unbrick. ( the first of so many times.... )
Then updated from settings to latest OOS 9.0.9.
unnlocked bootloader
and flashed again.
NO OS INSTALLED.
phone boots only in fastboot.
can't boot any recovery from fastboot. gives error.
if reboot to recovery blue led and black screen is all that i see.
only fix is msm.
From that point onwards i tried EVERY guide I could find (and recognize as valid of interest) here on xda, youtube, google.
Multiple times per guide.
here's an example of a "last resort" guide from https://forum.xda-developers.com/oneplus-6/how-to/guide-microg-oneplus-6-source-ligthway-t3874469
INSTALLATION TUTORIAL
Italic = recommended, but not mandatory. Do it if something doesn't work properly
0) DON'T RESTORE your apps until everything is set up, otherwise you'll have issues with GCM (getting instant notifications from messaging apps for example)
1) Reboot to blu spark TWRP
2) step deleted
3) Flash OOS
4) Flash TWRP
5) Reboot to recovery
6) Flash OOS
7) Flash TWRP
8) Reboot to recovery
9) Flash your custom ROM + TWRP + reboot to TWRP
10) Flash again your custom ROM + TWRP
11) Reboot to recovery
11 bis) Wipe data ("factory reset")
12) Flash Magisk
13) Reboot to system. It's just to make sure the installation worked.
... more on link
Click to expand...
Click to collapse
Tried also official lineage, SyberiaOS. Different previous version of the two (since I read in the lineage official thread others have this issue)
Basically at the point after flashing any of these roms results immediately in TWRP warning "no os is installed" at reboot attempt with or without re-flashing twrp after.
Then if rebooted just hangs on blue led. can't boot anything.
Meanwhile flashing OTAs + twrp results in bootable system.
Other things that i tried:
before unlocking BL update to latest OTA_34 -> 9.0.9, reboot, install again.
using mauronofrio twrp version https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3860815
Any ideas?
[SOLUTION]
If you're bricked follow this: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
1 - Have last OOS installed in both slots
- update from settings, local update, latest OTA (Pie) from oneplus support site.- reboot, let it complete- apply again2 - Enable OEM Unlock in Developer options
3 - Boot to Fastboot and unlock bootloader:
Code:
fastboot oem unlock
4 - Once in OOS reboot to fastboot and boot twrp:
Code:
fastboot boot <twrp-img-name>.img
5 - Push twrp + custom rom:
Code:
adb push <custom-rom-name>.zip <twrp-zip-name>.zip /sdcard
6 - Flash twrp in twrp
7 - Reboot to recovery
8 - Wipe system and Data
9 - flash ROM
10 - flash twrp
[IMPORTANT]
11 - Tap Reboot to recovery then if it says No OS installed! tap home button! Don't reboot! reboot = brick = msmdownloadtool
12 - Go in advanced menu and select Fix Recovery Bootloop and swipe
13 - THEN TRY TO MOUNT /system.
IF YOU'RE UNABLE TO MOUNT /system APPLY AGAIN THE FIX AND REPEAT FROM STEP 714 - Reboot to recovery
It WILL stil say No OS installed but now you'll be able to reboot to recovery[/IMPORTANT]
15 - Once in recovery reboot to system.
If you've done everything correctly it won't complain again about no OS being installed and you'll get your rom up and running.16 - Let it reboot to system and complete first configuration
17 - Now you can reboot and flash every module you like from twrp.
That's it. Hope this'll spare nightmares and storage write life.
This is a bad phone .. I have it too
تم الإرسال من ONEPLUS A6003 باستخدام Tapatalk
But you seem (from post history) to be able to install ROMs :crying:
As most of those who try i guess.
Maybe my phone is somehow damaged
What some guides miss out is that you have to install everything twice. Once on slot A and once on slot B and after each install, verify what slot you are on before reboot and then check what slot you are on after reboot. I ran into issues flashing Havoc OS onto my phone too and figured it out in the end after so many times that I was in fact installing stuff twice on the same slot because it never switched over. I'll run you through the order I did things so hopefully you can follow.
-Use MSM Tool to revert everything back to stock and once the phone is booted, update to 9.0.9 either by downloading the update through the phone or by local upgrade if you have the file to hand. (remember to only have the OOS file present as any other OS in zip form crashes the local updater). You don't need to do this if you are already rocking stock Oxygen OS.
-Once the phone has restarted after the upgrade, let the post update procedure finish before continuing.
-Enter developer mode and enable OEM unlocking, Advanced Restart and USB Debugging. From here, reboot to bootloader.
-Plug your phone into the PC now and assuming you have fastboot setup ready on your PC, type 'fastboot oem unlock' and use the volume keys to select the option to unlock and press the power button to select.
-After the phone has completed it's wipe cycle, re-enable Advanced Restart and USB Debugging. The OEM unlock option should be greyed out as it's already been enabled. Make sure you don't add a pin code or password just yet as you will enable encryption which will make the next steps harder than it should be.
-Boot back to bootloader and type 'fastboot boot twrp.img' (or whatever you named it. Make sure that the image file is in the same folder you initiated cmd or powershell)
-Once booted into TWRP, flash blu_spark TWRP as that supports encryption apparently and is more stable than any other. To make sure that the script executed on both slots, hit reboot and check what slot you are on and tap the button for the other slot. Now reboot back to recovery, check you are on the other slot and flash it again.
-Now flash your 9.0.9 OOS zip followed by TWRP once on slot A and once on slot B while making sure you are on the other slot when doing it a second time. Remember that you have to re-flash TWRP after any flashable file that alters the boot partition before you reboot or you will undo all your work. Just make it habit that you re-flash it every time and you should be good.
-Once OOS and TWRP have been flashed on BOTH slots, reboot back to recovery and do the whole process again with your custom ROM (Remembering to flash TWRP before you reboot and checking which slot you are one before and after each flash).
-Once that has completed, reboot back to recovery and flash Magisk on each slot and GApps or MicroG if your ROM supports it. You don't need to re-flash TWRP after this but I do anyway to keep the habit lol.
-Entirely up to you, but before you reboot to your fresh new OS, you can wipe internal storage ONLY if you want all traces of your previous OS gone, but this will also remove personal files etc. I generally just head into TWRP file manager and delete the Android folder and keep the rest.
If you run into issues like crashes on your new OS, reboot to recovery and do a factory reset, but you will also need to re-flash Magisk again. GApps installs itself to system, so you won't need to re-flash that. MicroG does not and will need setting up again. One thing that took me a while to realise is that if you try rebooting while your USB is plugged into your PC, you will sometimes enter download mode, so only keep it plugged in when you need it for MSM Tool or to transfer files across.
I'm pretty sure I put everything down the way I did it and didn't miss anything, but it is late and I am half asleep. Will check back in the morning and double check with a fresh brain.
Many thanks for your exhaustive reply!
Will follow this tomorrow morning with a fresh brain
Fixed!
Now I'll write a guide for those in the same situation.
franticboe said:
Hello!
I'm having quite a hard time figuring out what is happening on my new Oneplus 6.
The first time i flashed LineageOS 16 microg edition it booted but since i tried to restore stock ROM backup with TWRP it all went to hell.
Device immediately bricked, only booting to fastboot.
Had to use msm tool to unbrick. ( the first of so many times.... )
Then updated from settings to latest OOS 9.0.9.
unnlocked bootloader
and flashed again.
NO OS INSTALLED.
phone boots only in fastboot.
can't boot any recovery from fastboot. gives error.
if reboot to recovery blue led and black screen is all that i see.
only fix is msm.
From that point onwards i tried EVERY guide I could find (and recognize as valid of interest) here on xda, youtube, google.
Multiple times per guide.
here's an example of a "last resort" guide from https://forum.xda-developers.com/oneplus-6/how-to/guide-microg-oneplus-6-source-ligthway-t3874469
Tried also official lineage, SyberiaOS. Different previous version of the two (since I read in the lineage official thread others have this issue)
Basically at the point after flashing any of these roms results immediately in TWRP warning "no os is installed" at reboot attempt with or without re-flashing twrp after.
Then if rebooted just hangs on blue led. can't boot anything.
Meanwhile flashing OTAs + twrp results in bootable system.
Other things that i tried:
before unlocking BL update to latest OTA_34 -> 9.0.9, reboot, install again.
using mauronofrio twrp version https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3860815
Any ideas?
[SOLUTION]
If you're bricked follow this: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
1 - Have last OOS installed in both slots
- update from settings, local update, latest OTA (Pie) from oneplus support site.- reboot, let it complete- apply again2 - Enable OEM Unlock in Developer options
3 - Boot to Fastboot and unlock bootloader:
Code:
fastboot oem unlock
4 - Once in OOS reboot to fastboot and boot twrp:
Code:
fastboot boot <twrp-img-name>.img
5 - Push twrp + custom rom:
Code:
adb push <custom-rom-name>.zip <twrp-zip-name>.zip /sdcard
6 - Flash twrp in twrp
7 - Reboot to recovery
8 - Wipe system and Data
9 - flash ROM
10 - flash twrp
[IMPORTANT]
11 - Tap Reboot to recovery then if it says No OS installed! tap home button! Don't reboot! reboot = brick = msmdownloadtool
12 - Go in advanced menu and select Fix Recovery Bootloop and swipe
13 - THEN TRY TO MOUNT /system.
IF YOU'RE UNABLE TO MOUNT /system APPLY AGAIN THE FIX AND REPEAT FROM STEP 714 - Reboot to recovery
It WILL stil say No OS installed but now you'll be able to reboot to recovery[/IMPORTANT]
15 - Once in recovery reboot to system.
If you've done everything correctly it won't complain again about no OS being installed and you'll get your rom up and running.16 - Let it reboot to system and complete first configuration
17 - Now you can reboot and flash every module you like from twrp.
That's it. Hope this'll spare nightmares and storage write life.
Click to expand...
Click to collapse
i tried all the mentioned steps, nothing worked for me. Even i tried all the guides, here on xda and on youtube i am not able to boot my 1+6 it is getting booted to fastboot mode, after installing custom rom. But if i flash only OOS then it boots back properly.
But in case of a custom rom it boots back to fastboot mode, and then in the end msm tool is the last resort to lock bootloader and make it stock.
i tried all the mentioned steps, nothing worked for me. Even i tried all the guides, here on xda and on youtube i am not able to boot my 1+6 it is getting booted to fastboot mode, after installing custom rom. But if i flash only OOS then it boots back properly.
But in case of a custom rom it boots back to fastboot mode, and then in the end msm tool is the last resort to lock bootloader and make it stock.
Click to expand...
Click to collapse
If you are stuck on fastboot try
fastboot set_active other
then try rebooting recovery if fails try
fastboot boot pc-stored-twrp
I found changing the active slot via fastboot may unbrick it without msm. It all depends on what steps you actually take during installation.
For installing LOS try not flashing twrp after installation. Los comes with its own recovery. Anyway if it says no OS installed you HAVE to fix recovery bootloop.
I just purchased a new OnePlus 7 Pro yesterday and immediately set about rooting it. This is the process I followed:
fastboot oem unlock
fastboot flash boot twrp-3.3.1-4-guacamole.img
TWRP: Install > Select Storage > Internal Storage > Magisk-v20.3.zip
TWRP: Wipe > Format Data
I rebooted and was confused when I wasn't rooted. It seemed the last step had undone my root, so I went back into TWRP and installed Magisk again this time without formatting data. When I rebooted I had root and all was well.
However, there was an OEM update available that warned me it would remove root if I installed it. I found this guide to install an OEM update without losing root, which basically says to download the update via Oxygen Updater and then install it from TWRP. On step 6 is says to select the "Inject TWRP after install" option, but this didn't exist in my TWRP. I went ahead without it, thinking maybe it was enabled by default in my newer version of TWRP. The installation seemed to go without a hitch, but when I rebooted after I was stuck in fastboot. I couldn't boot my phone, nor could I get back into TWRP or regular recovery, only fastboot.
I tried flashing TWRP again using fastboot, but to no avail. I also tried running fastboot -w, but was still stuck in fastboot. I did some more research and found this comment which made it seem like all I had to do was download 10.0-GM21AA-OnePlus7ProOxygen_21.O.20_OTA_020_all_1909172051_db7a3f61-FASTBOOT from here and then run flash-all.bat. Once I did so I ended up stuck on the following screen:
Code:
QUALCOMM CrashDump Mode
--------------------------
dm-verify device corrupted Force Dump
kernel_restart
I can't seem to do anything at all with my device; not even turn it off. I tried holding the power button down for nearly a minute and no response from the phone. Is there any hope at all for my phone or have I properly destroyed it?
https://forum.xda-developers.com/oneplus-7-pro/help/mistake-kernel-error-t4029743
Same thing happened to me and I searched around a bit and found resolution. You can try what I did or try msm tool but search first as crashdump error is becoming common issue it seems
I held both volume buttons until restart and let go of one of them to get into recovery and then boot to boot loader if needed
Thank you so much! I thought I'd corrupted fastboot and permanently bricked the phone.
Once I was in fastboot I used tool all in one to flash 9.5.13-GM21AA-OnePlus7ProOxygen_21.O.16_OTA_016_all_1908281716_b2bb5-FASTBOOT.zip onto my phone by picking Flash Factory Images, and now it's back up and running.
jasons1004 said:
I held both volume buttons until restart and let go of one of them to get into recovery and then boot to boot loader if needed
Click to expand...
Click to collapse
This was the magic trick I needed to know. Holding both volume buttons didn't quite work for me. I held them both down for over a minute and nothing happened. Then I tried holding down the power button and that seemed to work after several seconds. I didn't hold down volume down quickly enough the first time, so I had to do it again. I held both volume buttons and the power button for over a minute, but again, nothing. I tried a couple more times and got it to work. Haven't been able to figure out exactly what causes it to exit the CrashDump mode, but the volume buttons together seems to be the important part.
This time I tried doing the OEM updates first, thinking that attempting to install them manually is what caused my problem. First I installed the 10.0.3.GM21AA update, then after rebooting I installed the 10.3.0.GM21AA update. At this point it said my system was up to date, so I want ahead and booted into fastboot and ran fastboot flash boot twrp-3.3.1-4-guacamole.img. No errors, but no TWRP either. My phone was stuck in fastboot again.
Is it necessary to stick with 9.5.13 if I want root? Is there some way to get TWRP to work with 10?
altayh said:
This time I tried doing the OEM updates first, thinking that attempting to install them manually is what caused my problem. First I installed the 10.0.3.GM21AA update, then after rebooting I installed the 10.3.0.GM21AA update. At this point it said my system was up to date, so I want ahead and booted into fastboot and ran fastboot flash boot twrp-3.3.1-4-guacamole.img. No errors, but no TWRP either. My phone was stuck in fastboot again.
Is it necessary to stick with 9.5.13 if I want root? Is there some way to get TWRP to work with 10?
Click to expand...
Click to collapse
Just use tool to flash 9 then after first boot fasboot flash whatever 10 build you can find. Then after first boot of 10 try boot twrp and install twrp.
Honestly I just used the tool to root and flash recovery. There is a button for that and just pick your files. Good luck
altayh said:
This time I tried doing the OEM updates first, thinking that attempting to install them manually is what caused my problem. First I installed the 10.0.3.GM21AA update, then after rebooting I installed the 10.3.0.GM21AA update. At this point it said my system was up to date, so I want ahead and booted into fastboot and ran fastboot flash boot twrp-3.3.1-4-guacamole.img. No errors, but no TWRP either. My phone was stuck in fastboot again.
Is it necessary to stick with 9.5.13 if I want root? Is there some way to get TWRP to work with 10?
Click to expand...
Click to collapse
You need to use a more recent versions of TWRP with Android 10. Current unofficial version -74 should work. So in your current condition, you should be able to simply boot TWRP (using the correct version), flash TWRP installer zip (if you want TWRP installed), flash Magisk (current version is 20.3) and reboot and you should have root again.
Easiest way I've found to install the OTA updates, is to simply install the update through the phone settings, do NOT reboot immediately after the update, go into Magisk Manager, flash TWRP installer zip as if it were a Magisk module (optional, if you want TWRP installed), then install Magisk picking the option "Install to inactive slot (after OTA)". Than just reboot, and you should be updated and with root.
redpoint73 said:
You need to use a more recent versions of TWRP with Android 10. Current unofficial version -74 should work. So in your current condition, you should be able to simply boot TWRP (using the correct version), flash TWRP installer zip (if you want TWRP installed), flash Magisk (current version is 20.3) and reboot and you should have root again.
Click to expand...
Click to collapse
Ah, I was using the Official TWRP App to get the images so I was under the impression that twrp-3.3.1-4-guacamole.img was the latest. I assume you're saying I should use TWRP 3.3.1-74 Unified Unofficial Q by mauronofrio from over here instead.
redpoint73 said:
Easiest way I've found to install the OTA updates, is to simply install the update through the phone settings, do NOT reboot immediately after the update, go into Magisk Manager, flash TWRP installer zip as if it were a Magisk module (optional, if you want TWRP installed), then install Magisk picking the option "Install to inactive slot (after OTA)". Than just reboot, and you should be updated and with root.
Click to expand...
Click to collapse
This is good to know. Thanks.
Just to follow up, I applied the available OTAs through the phone settings (up to bulid 10.3.0.GM21AA) and then followed the More articulated but fully functional instructions to install TWRP 3.3.1-74 Unified Unofficial Q. Everything went well and I'm now up to date and rooted. Thanks again to both of you!
altayh said:
I assume you're saying I should use TWRP 3.3.1-74 Unified Unofficial Q by mauronofrio from over here instead.
Click to expand...
Click to collapse
That is the correct TWRP to use ("Unofficial" version -74), as it appears you have already determined.
I don't know why the "official" versions have fallen so far behind. It's been months stuck on version -4, so it seems that they have stopped going "official" for some reason. No matter, the unofficial versions are working fine (and in fact required for Android 10 as you now know), so the "official" tag seems like a technicality.
On these OnePlus phones I don't know why they love Qualcomm Crashdump mode. I fixed it sort of like you, but this worked 100%. You hold all 3 buttons (power, vol up, vol down) and you bypass the crashdump (takes several seconds 5 maybe 10), just quickly let go so you'll be in fastboot mode and can work your magic to fix the damn thing....
I even contacted OnePlus on an 8 they had no idea what to do...
Fastboot flash boot recovery.img <-- bad idea
Fastboot boot recovery.img <-- provit
Hi all,
update: I made update at the end.
My OP7 version is GM1900, so far I was on build 10.0.6GM57BA with Magisk 20.4, but for some time I had 10.0.8 update notification.
Today I decided to update build.
I consider myself as medium experienced user the type that is using rather step by step guides.
But this time I thought I don't need guide cause I should remember how I did update last time. In the meantime I help my son to make homework what was an additional distraction.
I always download full OTA from oneplus.com support but it turned out there was no 10.0.8 (instead there was/is 10.0.7). So I tried to search for 10.0.8 and I found this xda news. As there is a mess with versions and links and I was doing it on mobile Chrome I accidentally tapped Global/India Full OTA
Steps I made:
1.1. Downloading file OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.2. Downloading official TWRP twrp-installer-3.4.0-0-guacamole.zip
1.3. Boot into TWRP.
1.4. Flash twrp-installer-3.4.0-0-guacamole.zip
1.5. Restart to TWRP
1.6. Flash magisk uninstall
1.7. Flash 10.3.5 (India & Global) - OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.8. Flash magisk 20.1 (but forgot to reboot after flashing TWRP it was first mistake I think)
1.9. Ended with 10.3.5 (India & Global) build with stock recovery and without Magisk.
Next I tried to return to GM57BA.
Then the steps I made:
2.1. Downloading official build 10.0.7.GM57BA from oneplus support site.
2.2. Downloading Mauronofrio's TWRP twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img and twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.3. Boot OP7 into fastboot then command "fastboot boot twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img"
2.4. After phone booted into TWRP I flashed twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.5. Restart to TWRP
2.6. Flashed magisk uninstall.
2.7. Flashed 10.0.7.GM57BA
2.8. Flashed magisk 20.4
2.9. Only then I rebooted to TWRP (I think it was mistake).
2.10. Then I saw first problem - there was no lockscreen security with TWRP (unlock pattern).
2.11. Restarted to TWRP again - the same no unlock pattern screen, no access to data partition
2.12. I started to panic and restarted into system.
2.13. I ended with hard bootloop - I mean I can't even do force reset (force reboot) by pressing and holding the Power and Volume down buttons at the same time :crying:
I'm sorry for this long description but I thought it will be helpful to diagnose what I messed up.
Questions and my thoughts:
1. Did I messed up by not restarting after last magisk flash?
2. What to do now? Do I need to wait for battery discharge? Then unbrick using MSM tool?
3. Is there any chance to repair and preserve personal data? I have TWRP backup about 3 months old. Maybe after battery discharge I should go to TWRP and then sideload this backup? Maybe magisk uninstall or stock boot image flash?
Please help
Update:
After battery discharge I managed to boot into TWRP recovery (Mauronofrio's 3.4.0.0)
Then couldn't access /data
But when I switched to Slot B and reboot to recovery situation is back to normal (I guess).
I'm still in recovery scared to boot into system.
What to do now?
kold11 said:
Hi all,
update: I made update at the end.
My OP7 version is GM1900, so far I was on build 10.0.6GM57BA with Magisk 20.4, but for some time I had 10.0.8 update notification.
Today I decided to update build.
I consider myself as medium experienced user the type that is using rather step by step guides.
But this time I thought I don't need guide cause I should remember how I did update last time. In the meantime I help my son to make homework what was an additional distraction.
I always download full OTA from oneplus.com support but it turned out there was no 10.0.8 (instead there was/is 10.0.7). So I tried to search for 10.0.8 and I found this xda news. As there is a mess with versions and links and I was doing it on mobile Chrome I accidentally tapped Global/India Full OTA
Steps I made:
1.1. Downloading file OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.2. Downloading official TWRP twrp-installer-3.4.0-0-guacamole.zip
1.3. Boot into TWRP.
1.4. Flash twrp-installer-3.4.0-0-guacamole.zip
1.5. Restart to TWRP
1.6. Flash magisk uninstall
1.7. Flash 10.3.5 (India & Global) - OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.8. Flash magisk 20.1 (but forgot to reboot after flashing TWRP it was first mistake I think)
1.9. Ended with 10.3.5 (India & Global) build with stock recovery and without Magisk.
Next I tried to return to GM57BA.
Then the steps I made:
2.1. Downloading official build 10.0.7.GM57BA from oneplus support site.
2.2. Downloading Mauronofrio's TWRP twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img and twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.3. Boot OP7 into fastboot then command "fastboot boot twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img"
2.4. After phone booted into TWRP I flashed twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.5. Restart to TWRP
2.6. Flashed magisk uninstall.
2.7. Flashed 10.0.7.GM57BA
2.8. Flashed magisk 20.4
2.9. Only then I rebooted to TWRP (I think it was mistake).
2.10. Then I saw first problem - there was no lockscreen security with TWRP (unlock pattern).
2.11. Restarted to TWRP again - the same no unlock pattern screen, no access to data partition
2.12. I started to panic and restarted into system.
2.13. I ended with hard bootloop - I mean I can't even do force reset (force reboot) by pressing and holding the Power and Volume down buttons at the same time :crying:
I'm sorry for this long description but I thought it will be helpful to diagnose what I messed up.
Questions and my thoughts:
1. Did I messed up by not restarting after last magisk flash?
2. What to do now? Do I need to wait for battery discharge? Then unbrick using MSM tool?
3. Is there any chance to repair and preserve personal data? I have TWRP backup about 3 months old. Maybe after battery discharge I should go to TWRP and then sideload this backup? Maybe magisk uninstall or stock boot image flash?
Please help
Update:
After battery discharge I managed to boot into TWRP recovery (Mauronofrio's 3.4.0.0)
Then couldn't access /data
But when I switched to Slot B and reboot to recovery situation is back to normal (I guess).
I'm still in recovery scared to boot into system.
What to do now?
Click to expand...
Click to collapse
To force restart I need to use power button and both volume keys..
To keep TWRP you need to flash rom, then without restart flash TWRP again, then restart TWRP, then flash Magisk.
Likely the r reason why your system doesn't boot is because it can't decrypt your data.
Why this happens I don't know, maybe in the upgrade they changed something related to the exception and then by downgrading again it isn't able to read it anymore.
I would suggest to:
Flash the latest rom.
Flash TWRP
Reboot TWRP
If TWRP then doesn't ask for PIN or password, then I'm afraid you have lost your data. I hope you have a backup.
I'm that case format (not just clear) data -> yes
Reboot TWRP
Then flash Magisk.
Thanks for reply.
Like I wrote in update after changing slot to b I managed to run TWRP with decrypted data, made even new new backup.
I also restarted into system and it occurs I'm still 10.3.5 (India & Global) GM57AA, so everything I flashed in with build 10.0.7.GM57BA was unsuccessful.
I think I messed with changing inactive slot procedure. Noob mistake I need to read about it.
kold11 said:
Thanks for reply.
Like I wrote in update after changing slot to b I managed to run TWRP with decrypted data, made even new new backup.
I also restarted into system and it occurs I'm still 10.3.5 (India & Global) GM57AA, so everything I flashed in with build 10.0.7.GM57BA was unsuccessful.
I think I messed with changing inactive slot procedure. Noob mistake I need to read about it.
Click to expand...
Click to collapse
I would suggest do restore your device with msm unbrick tool.
1. From recovery, turn off (i noticed, that when tried to turn off from somewhere else, the device would auto reboot later in downlaod mode)
2. In windows, turn off the connection & open device manager: Get this driver http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab
3. Press volume/down + volume/up, after about 5s connect to pc
4. Your device should show up in device manager, open it and install the driver manuell from step 2 (keep device options open... if fail you need to uninstall the driver before trying again)
5. Now wait for about 40s, if your device stays in download mode, you can open & start the msm tool (leave the options in msm as they are)
6. It will take about 280s, then the device will reboot.... (its normal that it stays longer at the oneplus logo at first start)
MSM Thread: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
I've also uploaded the 10.0.5OOS Unbrick tool on mega, because android file hosted downloads are so terrible: https://mega.nz/file/ArZFkYpS#Z_rOIwZeYN27IG6L8rOi-yfw8wXGiwvK-uWVDlsmvTI
Hi all.
Today I unlocked my phone to flash the crDroid rom. First I went into fastboot to flash mauro's twrp and that worked fine. Then I flashed the miui 12.0.3 full stock image from twrp, which might have been a mistake since I flashed the full image instead of an extracted vendor / firmware version. Then I wiped system, cache and data and flashed twrp but when I tried to boot the phone it went into an infinite boot screen. Then I wiped and flashed the whole stock miui image again in the hope that I would at least be able to boot miui but that also failed, since the phone kept booting back to recovery and there was no boot screen at all.
I have also tried flashing the stock image (ver 12.0.6) from fastboot but it fails because of the anti rollback check error. The image I tried to flash has an antirollback version of 0 while my phone has a version of 1, so "current device antirollback version is greater than this package" is what I got. Now my options are very limited because for some reason my laptop can't access the file system of the phone so I can't transfer files to the phone anymore and the ADB sideload feature from twrp is not working, so I only have fastboot (adb also won't recognize my device). What can I do to save my phone? Any help is greatly appreciated.
Flash the MIUI with MiFlash.
Had sort of the same issue...
Try using adbfastboot tool ( it's a java programme ) to swap recoveries.
I got the bootloop after installing the LOS recovery , installed twrp from adbfastboot tool and got it working.
Nice to have working recovery but since adb sideload is broken in twrp i needed LOS recovery.
Tried to reflash the LOS recovery from the tool and this time it worked
Flash with Miflash (the latest version https://xiaomiflashtool.com/ option CLEAN ALL) the rom that was on your phone when you bought it.
For the roms It is better to flash firmwares with Miflash because TWRP is not 100% functional.
grt67DFqyu said:
Flash the MIUI with MiFlash.
Click to expand...
Click to collapse
Man I can't believe such a simple suggestion would work but it did thanks! Initially I did not flash with miflash because it prompted me to install drivers and it crashed when I clicked the install button, turns out all I had to do was create a folder named log in the miflash directory lol. So flashing the stock image works. And it definitely boots correctly to miui with the clean all and lock option.
But now when I try to flash crdroid or pixel experience I still end up with an infinite boot screen even when using exactly the specified firmware :/ Like you see crdroid and pixelexp boot animations correctly but it lasts forever. I must be doing something wrong with the firmware still because that's the only reason I can think of why it won't boot. After I flash the firmware in miflash I don't have to boot miui up first right? I'm using the 'save user data' option in miflash if that matters.
In my post, I specified CLEANALL, but anyway, you must format data before flashing.
Which rom do you want to install Cdroid or Pixel?
NOSS8 said:
In my post, I specified CLEANALL, but anyway, you must format data before flashing.
Which rom do you want to install Cdroid or Pixel?
Click to expand...
Click to collapse
I'm now trying to flash crdroid. After flashing V12.0.3.0.QJKMIXM in miflash with flash_all, I formatted data in twrp (the one where you have to type yes) but also with a decrypt & normal factory reset I still get the same result. After the format, I flashed crdroid without magisk and gapps, and it'll just hang on the crdroid boot screen :/. The weird thing is, before I flash the crdroid rom it can boot in MIUI just fine and it'll show that it's indeed the correct 12.0.3.0 in the settings so I have no idea if it's just the crdroid ROM at this point.
Flash with miflash V12.0.3.0.QJKMIXM reboot system and go fasboot when affiche "devices is locked",flash chinesse twrp ,reboot twrp,format data reboot twrp,wipe all ecxept OTG reboot twrp,flash Cdroid format data,reboot twrp flash gapps,reboot system( take time ).
NOSS8 said:
Flash with miflash V12.0.3.0.QJKMIXM reboot system and go fasboot when affiche "devices is locked",flash chinesse twrp ,reboot twrp,format data reboot twrp,wipe all ecxept OTG reboot twrp,flash Cdroid format data,reboot twrp flash gapps,reboot system( take time ).
Click to expand...
Click to collapse
This ended up working perfectly Crdroid is now running like a charm with gapps and magisk. Thank you guys a lot for helping me out with this!
Unsure if this is the place since its also related to TWRP 3.7, any help is appreicated
Got stuck in a weird situation and wondering if anyone has ideas.
Current State:
Slot_A on OOS 11, can boot TWRP via Fastboot
Slot_B on OOS 12, can only boot into Fastboot
Originally on OOS 11, booted TWRP and made backups of all partitions (data, boot, system image, vendor image, etc.). Forgot to move this to computer so this is all still stored on device.
Proceeded with OOS 12 upgrade (into Slot B). Patched magisk, rebooted, then flashed TWRP 3.7 (FBEv1), direct installed magisk, rebooted. - Everything was functional, but decided to go back to OOS 11.
Thinking I could just use the TWRP backup made on OOS 11, I did the following:
Booted into 3.7 TWRP
Restored the backup for boot, system image, and vendor image
Set active slot to Slot A and reboot
It doesn't allow me to boot into the OS (Presumably because the data was re-encrypted for OOS 12?)
Set active-slot=b and reboot, but it's locked to fastboot.
I've attempted a few things, but I can't boot back into OOS. I would prefer to retrieve my TWRP backups first before doing an MSM reset.
When on Slot_A (older), I can only boot into TWRP 3.6.2 and 3.7. I'm guessing 3.6.2 can't decrypt since it's only configured for A11 and under, but not sure why 3.7 can't decrypt my data.
- It doesn't even ask for pin when TWRP launches; maybe it's reading the System for Slot_A and thinks i'm still on A11?
- running `twrp decrypt {pin}` doesn't seem to work. Unsure if there's something done to my lockscreen pin to be used as the encryption key/password?
When on Slot_A, attempting to boot into either the system or TWRP hangs.
Things I've tried:
Flashing A11 boot.img and magisk-patched boot.img to Slot_A -> Hangs on 1+ Spinning dots
Flashing A12 boot.img and magisk-patched boot.img to Slot_B -> Hangs on 1+ logo (Does show up on ADB though)
Booting Slot_B into TWRP 3.6.2 (Official, and Nebrassy unofficial for A12) and TWRP 3.7 -> Gets stuck on "Fastboot Mode" screen (fastboot cli still responds) or Hangs on snapdragon logo
Edit: Ended up using MSM. Needed device for work
I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/
I got it working with crdroid. heres some stuff
guacamole - Google Drive
drive.google.com
be carefull
¯\_(ツ)_/¯
------------------------------------
I got stable and decrypted fs RW working on crdroid 9.1 firmware other than some weird bugs
i put it in the 2023-twrp
MissAnthropin said:
I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/
Click to expand...
Click to collapse
I have the exact same problem! Have you found a fix yet? This seems to happen when I try to install Android 13 based roms, and when I install a rom like Lineage OS, using their recovery, it works just fine.
No, and I don't know why, maybe i do something wrong or it is the Modell that make this trouble.
I thinking to sell my OP7PRO and buy another one ( and then I have the same problem with the new phone )
No no let the jokes aside, it must work, i mailed with OnePlus Support Germany but they only helped me to install A11 w/root and recovery, i thought ok now I can update to A13 so I loaded A13, unpacked the boot.img, Patched the boot.img
Installed A13 w/out errors, rebooted - Fastboot loop
RIP
Started ranting instead
TWRP for guacamole development seems to be fairly scarce, last working recovery I tried was when they started using fastboot boot to enter it. It was pretty hacky even then, currently it seems that nebrassy is the maintainer for twrp for guacamole.
Github: https://github.com/nebrassy Android 12 thread: https://forum.xda-developers.com/t/recovery-12-official-teamwin-recovery-project.4269551/ Nebrassys Telegram has helpful info as well: https://t.me/NSSFB
last update I found was 2022:10:2 - https://www.pling.com/s/Phones/p/1835156
after a few days of torture I read a thread on here saying if you flashed twrp via magisk like you would if it was a magisk moule it would work normally. It worked on my device so I assume that its universal. I have filled my computer with guacamole related files Im uploading here before im forced to reinstall my os:
guacamole - Google Drive
drive.google.com
Just a fyi from what I have gathered from my experience you can get a stable twrp recovery with persistant / read write access and disabled encryption and basically use it with little error up until you try flashing a newer custom rom. My guess is when flashing a cfw the bootloader gets rewritten causing our boot image to become corrupted. Flashing twrp over / booting to twrp via fastboot or trying to install it via another custom recovery causes boot / recovery failures... meaning you cant really use it for flashing custom roms. I cant find the post with the install instructions I seen that helped me so here is what I think it was,
Found it: https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325
~ I have bricked this device constantly while ****ing around so unless youre prepared to go to war with the ****er, Id quit messing with it.
MSM flashing with windows is the only way to recover from the void.
Click to expand...
Click to collapse
using Linux systems for EDL is a bit more difficult to figure out but can be done > EDL https://github.com/bkerler/edl/blob/master/edl | https://github.com/andersson/qdl
Click to expand...
Click to collapse
~If you do brick I created a fastboot flashable A13 Oxygen os recovery rom and uploaded it to my google drive found under recovery_brick_fastboot.zip ~
Click to expand...
Click to collapse
lastly be mindful of a/b partition configuration or youll find yourself lost or bricked
Installation:
1. Obviously unlock the bootloader - OEM Unlock
2. Flash custom recovery (lineage/crdroid/etc)
3. (Personally I root here and again on the active slot so) flash magisk.zip
4. Reboot into installed ROM and install magisk android app and complete setup, reboot system
5. (another thing I like to do before flashing twrp) setup magisk enable all the basic options like prophide, deny list then set root userspace option to global.
6. Flash TWRP .zip (https://dl.twrp.me/guacamolev2/twrp-installer-3.7.0_12-0-guacamolev2.zip) via magisk
Alright! After all that you should be able to reboot into recovery via adb reboot recovery / fastboot or power menu and you find a working twrp recovery installed.
If you need help or want to **** around with the device you can @ me anytime and ill do my best to halp
2600 IRC (cornelius.scuttled.net >Nick captain >channel #guac)
Telegram https://t.me/+pxvpKToFo6pkMGYx
Discord https://discord.gg/MhvWgEfY
Pics
RolandStoner said:
Pics
Click to expand...
Click to collapse
You Confussing me a lot with your Posts before ...
i´m unsure what you mean exactly,
my bootloader is unlocked, with magisk i got a working root but after that i fail
what you mean with flash twrp with magisk ?
after unlocking the bootloader and get root, i tryd to flash twrp like before on other devices but that seems not working because i get then the fastboot loop
on another thread i found here on xda too, the guy wrote dont forget to activate the fastboot loop fix in the advanced options
but i not tried it yet again , so what should i do now ?
for now , i´m back on android11 , with stock oxygen os firmware
i have to do now the things like i did before again , unpack boot.img from the firmware that is installed on the device
patch it with magisk, flash it with "fastboot flash boot boot-patched.img" or is this step senseless ?
i mean you only wrote unlock bootloader and flash a cfw , but i don´t have a chance to flash a custom fw without a custom recovery ??
my recovery on my op7pro have no options for "install zip" or something else
addendum:
like i said you confused me a lot
addendum two:
or i do what i said before .. i sell my op7pro and buy me a one where i havent so much trouble installing twrp and root
i never had a phone before that made so much trouble in installing simple twrp ...
but i don´t found a phone yet that is compatible with kali and the pentest tools or wardriving tools like the oneplus , so i have a problem ,... i think i should drink now my selfmade blackberry liquor ( or blackberry booze ? ) and let the smartphone be a smartphone for now and power off my brain for a while
Yes, you need to patch your boot image via magisk and flash it with fastboot.
After you let magisk do its first time setup and then once it reboots you go to Magisk > Modules and flash the twrp recovery .zip file you got from twrp. link:https://twrp.me/oneplus/oneplus7pro.html just like you would if it was a magisk module.
the password for twrp decryption is your pin. Here are simpler instructions
https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325
****... I forgot a step.
after flashing twrp as a module in magisk you dont reboot, you go back to the main screen hit the install button and choose direct install
Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help
MissAnthropin said:
Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help
Click to expand...
Click to collapse
Thank @yassine2217 because I would never have done so either.... Still many bugs but twrp is twrp