Database Info

[Guide] Unlocking the Mi4c Bootloader without verification by Xiaomi

This evening I had the same problem like many of you and I just did not want to wait 2-3 weeks for the unlock code from Xiaomi. I went through a lot of threads and different forums to create this guide.
Requirements
- ADB up and running (I am an Android developer, so I have this installed already - unsure if you need specific ADB drivers for Xiaomi devices though)
- Xiaomi MI4c
- MiFlash: http://bigota.d.miui.com/tools/MiPhone20151028.exe (via http://en.miui.com/a-234.html) - Install
- Mi4c Image: libra_images_6.1.7_20151221.0000.11_5.1_cn_b09dac70a0.tgz - unpack until "images" directory is visible!
- [Optional] Mi4c Fastboot Image: miui_MI4c_6.1.21_d1d054460d_5.1.zip
- [Optional] Latest TWRP: http://forum.xda-developers.com/mi-4c/development/libra-twrp-3-0-t3315059
- [Optional] Latest build of CM 12.1: http://forum.xda-developers.com/mi-4c/development/cm12-1-build-cyanogenmod-12-1-device-t3291631
Step-by-step
Step 1 is optional: I was not sure, if I could use the "fastboot oem edl" command in a higher version of MIUI... feedback required. Thus following is a list of known Xiaomi ROMs which support this procedure:
If you are using one of the following ROM versions, you should be able to unlock the device easily with the provided guide. However, I have messages that the versions don't work with higher MIUI ROM versions.
CONFIRMED WORKING
V8.6.9.15 MIUI Dev ROM
V8.0.16.0 MIUI Dev ROM
V7.5.4.0
V7.5.3.0.LXKCNDE
V7.1.4.0.LXKCNCK
V6.1.21 (Download link above)
V6.3.24
V6.3.17
V6.4.21
V6.4.14
V6.5.26
V6.8.25
V6.9.15 (China Dev)
Not confirmed (?)
None
Not working
None
(Optional) Downgrade your Mi4c by flashing any image from the list above via the "Updater" app (use top right icon to select image).
Reboot into fastboot mode (Power + Vol Down) until you see the MIUI rabbit and "FASTBOOT"
Command: fastboot oem edl (this brings your device in a kind of emergency recovery state) -> the device does only show a black screen. Do the next step.
Use MiFlash to flash 6.1.7 image (Browse -> select the "images" directory of the 6.1.7 package and start flashing)
When completed, reboot the phone by holding the Power button long (~8s)
Wait until 6.1.7 is completely loaded (this may take a while)
Reboot into fastboot mode (Power + Vol Down)
Command: fastboot oem unlock -> at this point you should have an unlocked bootloader
Now optionally install TWRP and subsequently CM 12.1 and enjoy (see respective linkes in the requirements for a howto) - TWRP: fastboot flash recovery <twrp>.img
With this post, I want to say thank you to all the developers who take their time to port Cyanogen to exotic Android devices. You are heroes!
In case you want to donate me something: https://paypal.me/wolkenjaeger

Great post.
Very detailed explanation.
Very usefull.

could i back to miui rom after installed CM rom

nhkhanh068 said:
could i back to miui rom after installed CM rom
Click to expand...
Click to collapse
Yes you can, as you see the CM is optional, you can choose any rom of your liking.
Be warned that any of the latest official Miui roms will lock your bootloader right back and if you have TWRP in place, you will bootloop.
Xiaomi.eu or sMiui highly recommended alternatives if you want to go with miui.
Great step by step tutorial, worth a sticky imo since more and more people coming here will be locked in the future.

I did unlock the bootloader using the guide and it works.
Step 1 Downgrade your Mi4c by flashing the 6.1.21 image via the "Updater" app (use top right icon to select image) is not necessary .
Also all data will be wiped.

vasil_d said:
I did unlock the bootloader using the guide and it works.
Step 1 Downgrade your Mi4c by flashing the 6.1.21 image via the "Updater" app (use top right icon to select image) is not necessary .
Also all data will be wiped.
Click to expand...
Click to collapse
Thanks for the feedback. Did you "EDL" flash from the latest stable / dev version?

Not working for me. I'm Unable to flash 6.1.7 from update from 6.3.10. When I send command: fastboot oem edl phone reboots and then I am unable to glash with MiPhone. :crying:

wolkenjaeger said:
Thanks for the feedback. Did you "EDL" flash from the latest stable / dev version?
Click to expand...
Click to collapse
I used china stable V7.1.4.0.LXKCNCK

fastboot oem edl
Hi guys i need some help, when i try to use "fastboot oem edl" then flash it all it gives me black screen and cannot go back to fastboot.
no key combination is working power+vol - is dead power+vol up is also dead..
all i can see is its recognize it via device manager port com "Qualcomm hs-usb qdloader 9008"
please point me out to somewhere i can see my fastboot mode again
thanks in advance

ding-dong said:
Hi guys i need some help, when i try to use "fastboot oem edl" then flash it all it gives me black screen and cannot go back to fastboot.
no key combination is working power+vol - is dead power+vol up is also dead..
all i can see is its recognize it via device manager port com "Qualcomm hs-usb qdloader 9008"
please point me out to somewhere i can see my fastboot mode again
thanks in advance
Click to expand...
Click to collapse
Well, when you get the black screen, start MIFlash :fingers-crossed:

wolkenjaeger said:
Well, when you get the black screen, start MIFlash :fingers-crossed:
Click to expand...
Click to collapse
i did that several times but nothing happend it said tobe successfull but i cannot open my mi4c.. can u help me to get back to fastboot?
i dont have anything now...

But.. How can I check if the bootloader is locked / unlocked? In fastboot nothing useful is displayed

hi,
everything going fine for me, unlock worked, flash recovery twrp worked. But finally i still have the miui recovery...
Now when i try to unlock through MiFlashUnlock, it says "Devices already unlock". Before doing this guide i was blocked at 50% "Mi account not the same that devices information".
What can i do ??

matt0101 said:
hi,
everything going fine for me, unlock worked, flash recovery twrp worked. But finally i still have the miui recovery...
Now when i try to unlock through MiFlashUnlock, it says "Devices already unlock". Before doing this guide i was blocked at 50% "Mi account not the same that devices information".
What can i do ??
Click to expand...
Click to collapse
don't let en.MIUI rom boot after you install twrp. because it will reinstall the stock recovery over the twrp recovery. In fact, you have to go directly to twrp after flashing it, and try MIUI.eu or other CM roms.

tuanhung303 said:
don't let en.MIUI rom boot after you install twrp. because it will reinstall the stock recovery over the twrp recovery. In fact, you have to go directly to twrp after flashing it, and try MIUI.eu or other CM roms.
Click to expand...
Click to collapse
Thanks you very much, it finally works !!!

Thanks

Anyone else confirms? Maybe a video?
~~mi4c™~~

Thank you! Worked great for me!

Will this work with xiaomi mi5?

Great work man
can I share this on Polish forum?

Guide: How-to Unlock, Root, TWRP, ROMs, Android P, Google Apps, Magisk

In the original Mi Mix Forum we had a one-in-all thread for all new users, so I try to continue it here.
I will try to mention all people from who I take sources from. If I forgot anyone, please don't hesitate to tell me.
If you have change requests or useful additions, I will try to update the original posts ASAP.
Change log 2018-08-16 03:30 AM UTC
Code:
+ Updated: MIUI 10 china & global beta links
+ Added: Google Maps Location Sharing & Timeline on Chinese ROM
+ Updated: Working GCam links
Chat Group
Get live help and discuss topics around Mi Mix 2S in our Telegram Group: MOD EDIT: Telegram link removed, read the STICKY!
Available ROM & Download Links
The variants sold outside of China come with the Global ROM including Google Apps.
For devices that have the Official Chinese ROM, it's only possible to flash the Official Global ROM after you unlock your device due to region mismatch.
OTA or recovery zips can be flashed in the official MIUI updater app if it matches your region) or if you're unlocked, you can flash through TWRP whatever you want.
Fastboot ROM can be flashed by using fastboot or the XiaoMi Flash Tool.
ROMs:
Recovery can be flashed through the Updater app on your phone (if locked, china can only flash china, global can only flash global) or better through TWRP Recovery (if unlocked, can of course flash any region over any).
Fastboot can be flashed by connecting your phone through USB and use XiaoMi Flash Tool or fastboot.
Custom ROMs can be flashed by TWRP (if unlocked)
MIUI 9.5 Official Download Links on miui.com (Chinese Stable/Developer, Global Stable/Developer)
Recovery latest
Fastboot latest
MIUI 9.5 Global Stable (leaked):
Recovery 9.5.19
Recovery 9.5.18
Recovery 9.5.4
Fastboot 9.5.4
MIUI 10 Global Closed Beta, Android 9 (leaked)
Recovery 8.8.7
MIUI 10 Global Closed Beta, Android 8 (leaked):
Fastboot 8.6.26
Recovery 8.6.14
MIUI 10 Chinese Beta, Android 9.0 (leaked)
Recovery 8.8.15
MIUI 10 Chinese Beta, Android 8.0 (leaked)
Recovery 8.7.2
Fastboot 8.6.21
Recovery 8.6.13
Recovery 8.6.12
Recovery 8.6.11
Recovery 8.6.6 *relocks bootloader, flash root/magisk or unlock again (you'll loose /data)
Recovery 8.6.5
Recovery 8.6.4
Recovery 8.5.31
MIUI 9.5 xiaomi.eu Custom ROM:
Recovery latest
Official Android P preview from Google (pure AOSP):
System Image
AOSP Custom ROMs
Mokee
Lineage Treble
Available TWRP recoveries & Download Links
TWRP by xiaomi.eu and miuiItalia
The first versions are from xiaomi.eu and miuiItalia and aren't able to read encrypted internal storage. If you want to flash something with this TWRP you need to format your internal storage then copy the file over in MTP mode and flash it. So you loose your storage all the time. No problem when you want to cleanly flash new ROMs, but annoying when you just flash magisk, mods and other things.
Download TWRP polaris by xiaomi.eu
Download TWRP by miuiItalia
TWRP by notsyncing
notsyncing's version is able to work with encrypted storage. You need to enter your pin or draw your lock pattern in order to work. Switching between different ROMs like Chinese/Global/Custom you most probably still need to format your /data, but when you stay on the same ROM no need to wipe or format.
Thread
Guide: Install Google Apps & Contact Sync on Chinese ROMs
Chinese ROMs don't contain Google Apps. Especially if you didn't unlock your phone you probably want to install Google Apps and Framework:
Download the Oreo Google Apps package: https://androidfilehost.com/?fid=818222786056028173 and extract it on your phone
Install every APK from 1-6 without opening them after installation!
Install 8.0-Oreo.com.google.android.gsf_8.0.0-4147944-26_minAPI26.apk
Don't inistall the remaining two APKs
Download and install the updated contacts sync 8.1.0 APK: https://www.apkmirror.com/apk/google-inc/google-contacts-sync/google-contacts-sync-8-1-0-release/google-contacts-sync-8-1-0-2-android-apk-download/
Go into Settings > Installed apps and find all Google Apps in the list. Select each of them and turn on Autostart Permission. Additionally go into Permissions and enable all permissions in there. Again: Do this for all Apps you've just installed or that have the name Google or Contacts or Calendar in it.
Reboot your phone
Login to your google account, by opening Settings > Sync > Add Account > Google
Guide: Install Global ROM (leak)
If you're on Chinese or xiaomi.eu ROM and you want to flash the official Global ROM that has been leaked:
Unlock bootloader
Download Global V9.5.18.0.ODGMIFA from above
Boot phone into fastboot, open fastboot console on your pc, connect phone via USB with your pc
download and extract official twrp recovery for mix 2s and name the file recovery.img and copy it onto C:\
fastboot boot recovery.img
wipe > advanced > dalvik cache, system, data, internal storage, cache
copy V9.5.18.0.ODGMIFA zip and region fix onto your phone (may not be necessary with global device, and/or with newer global ROM leaks. try without the fix first)
twrp: install V9.5.18.0.ODGMIFA zip
twrp: install region fix zip
reboot and complete setup of your phone
For magisk see below
Guide: Install MIUI 10 leak
phone: boot to fastboot
pc:
Code:
fastboot boot twrp.img
phone: wipe data, system, dalvic, cache
phone: format DATA
phone: reboot phone into fastboot
pc: fastboot boot twrp.img
pc: transfer miui 10 zip to phone memory
phone: install miui 10 zip
phone: reboot to miui 10 setup device wizard
phone: in case your device is bound to a xiaomi ID, enter your password
phone: complete MIUI 10 setup
phone: download form apkmirror and install:
Magisk
Info: info: may not work if you have the chinese 6GB model instead of the global model, but always works on the 8gb model
phone: reboot to fastboot
pc: copy magisk 16.4 install/uninstall zip to phone
phone: install magisk
reboot
Guide: Install official Android P developer preview
Google announced the Android P preview officially for the Mi Mix 2S as shown here: https://developer.android.com/preview/devices/
Requirements:
Unlocked bootloader
ROM: http://bigota.d.miui.com/8.5.3/polaris_dp_global_images_8.5.3_20180503.0000.00_9.0_ef2f024b87.tgz
Setup after first boot needs to be completed in Chinese. Then afterwards changing the language to English is possible
Steps to install: Download Android P for Mi Mix 2S: http://www.mi.com/en/androidppreview/
Guide: Unlock bootloader
On your phone, login to your Miui Account, if you don't have an account, create one. That's under Settings > MI Account
Enable developer mode on your phone, under Settings > My Device > All Specs > Tap on MIUI version 5 times until the toast notification tells you that you're a developer
Go into Settings > Additional Settings > Developer options > Enable: OEM unlocking, then go into MI Unlock status and "Add account and device". (If you get an error messages, you need to use a VPN app and connect to a city in Mainland China, like Beijing)
Download and run http://en.miui.com/unlock/ the unlocker app on your computer, login with your MI Account. The first time you may have to apply for Unlocking permissions with your MI Account. The SMS confirmation code they send you may take several days to arrive. Please be patient and don't try to unlock your device before.
After you got your SMS confirmation code, enter it in the unlocker application on your computer and connect your phone via USB
Try to unlock your phone.
Sometimes Xiaomi will now force you to wait for up to 360 hours until you can try again to unlock. This is annoying, but you have to wait. Otherwise your account may be blocked.
Guide: Flash any Treble ROM
Download any Treble ROM:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
https://forum.xda-developers.com/project-treble
Requirements:
Unlocked bootloader
Be on Global or Chinese official stable ROM, flash it through XiaoMiFlasher and download the fastboot ROM from mi.com if necessary
Minimal ADB & Fastboot installed on your Windows computer
Download the ARM64 NANO OpenGApps for the exact Android version your Treble ROM uses: https://opengapps.org/
Optional: Download Magisk 16.4 and Magisk Uninstaller
Perform a factory reset on your device. You have two options here:
Open the settings app on your phone and look for the factory reset option.
Boot your phone into fastboot
With your device connected to your PC start the Minimal ADB & Fastboot console
Enter a command in the following format:
Code:
fastboot flash system
having a space at the end, so it's fastboot flash system(SPACE) and drag and drop your Treble img file with your mouse from an Explorer window into the cmd console
Example:
Code:
fastboot flash system C:\Users\Superman\Desktop\Mix2S\system-arm64-aonly-gapps-su.img
Push enter, and allow the image to flash, it could take a few minutes.
Once it has completed, reboot your device into fastboot then (WARNING: THIS WIPES EVERYTHING) enter
Code:
fastboot -w
from your computers command prompt window.
Reboot
Optional:
You can flash TWRP and then flash GApps and or Magisk if you want. The DM-Verity check may prevent the phone from booting, so by flashing Magisk DM-Verity check should be disabled and your phone should boot.
Guide: Flash TWRP Recovery and Custom ROM
Download TWRP for Mi Mix 2S above
Extract the img file of the TWRP zip you've downloaded, into C:\ and name it recovery.img
Turn off phone
Press Volume Down + Power button until phone boots into fastboot mode
Download and install latest Minimal ADB and Fastboot from here https://forum.xda-developers.com/showthread.php?t=2317790 on your windows computer
Connect your phone with the USB cable
Open a CMD window on your windows computer (Press CTRL+R enter cmd, press enter)
enter the following command and press enter: fastboot flash recovery C:\recovery.img
enter the following command and press enter: fastboot boot C:\recovery.img
Wipe /data partition
Copy the ROM zip file to the internal storage of your phone
Install the ROM zip
Reboot
done
Guide: Install Magisk
More information on http://en.miui.com/thread-2449455-1-1.html
For Official Global ROM (not xiaomi.eu) I can confirm this works (safetynet passed):
NOTE: Check your phone model in settings > my device > model (MIUI 9) or settings > my device > verification (MIUI 10). Depending on your Model and ROM Magisk may not work. See below for confirmed outcomes.
Click to expand...
Click to collapse
Chinese / Global / Beta + M1803D5XA + Magisk = OK
Chinese + M1803D5XE + Magisk = OK
Chinese + M1803D5XE + Magisk = OK
xiaomi.eu + M1803D5XE + Magisk = OK
Global + M1803D5XA + SR-SuperSU-v2.82-SR5 = OK
How to flash Magisk the common way
Use the modified twrp with working partition decryption
Unlock your bootloader
on PC: fastboot boot recovery.img
in TWRP: Install your ROM (example Global V9.5.18.ODGMIFA)
If you want to flash global on a chinese device, in TWRP: install region fix otherwise go to next step
on Phone: Boot and complete MIUI setup
on PC: fastboot boot recovery.img
in TWRP: enter your password to decrypt storage
in TWRP: install Magisk-v16.4.zip
Reboot
Guide: Pass Safety Net with Magisk
Install MagiskHide Props Config in MagiskManager Modules
Reboot phone
Install Terminal Android, and start it.
Give it root permissions
type in the terminal window:
Code:
su
props
1
fingerprint
use the fingerprint:
Code:
Xiaomi/polaris/polaris:8.0.0/OPR1.170623.032/V9.5.15.0.ODGCNFA:user/release-keys
And boom, pass safetynet after a reboot
Info: You can enable developer mode, turn on USB debugging and use ADB on your PC instead of the terminal on your android. After installing Minimal ADB & Fastboot on your PC, search for the link in your start menu and open it. A black CMD window should appear where you can type commands after you connect your PC with your phone, and allow ADB on your phone. Then enter:
Code:
adb devices
adb shell
Enter the commands in the tutorial above
Click to expand...
Click to collapse
Enable Google Maps Location Sharing & Location History on Chinese MIUI ROM
You need Magisk properly installed on your ROM and then download & install the module: Unlock CN GMS
Google Camera with HDR+
Some modified versions of Google Camera may allow to use HDR+ with the Mi Mix 2S. For some these may work:
defcomg-fix_OP6v0.3_MGC_5.1.018_FINAL_3.4A.apk
As the modders keep creating new fixes, you should try out new versions from here regularily and see if HDR+ works and the portrait camera works.
Original thread: Mix 2S Google Camera

only fastboot roms
tool only fastboot rom. How do I flash your ROM?

underlines said:
...
Official Global ROM
The variants sold outside of China come with the Global ROM including Google Apps.
For devices that have the Official Chinese ROM l, it's possible to flash the Official Global ROM. L
Follow the Unlock tutorial in this guide
Download the Official Global ROM: http://bigota.d.miui.com/V9.5.4.0.ODGMIFA/miui_MIMIX2SGlobal_V9.5.4.0.ODGMIFA_702fd64fce_8.0.zip
Extract the Zip to C:\rom
Download and install Mi Flash tool
Turn off your phone. Press Volume Down + Power button to boot into Fastboot mode
Connect your phone via USB to your computer
Flash the ROM with Mi Flash Tool
...
Coming soon
Click to expand...
Click to collapse
Thanks for your effort. About the quoted part i don't think it will work by following this steps. People in this topic tried without success: https://forum.xda-developers.com/xiaomi-mi-mix-2s/how-to/global-stable-rom-link-t3786717
It seems the proper way is the one it follows:
teddy74eva said:
I've just tried it and the bootloader has to be unlocked, otherwise the phone will not boot. But thanks for your guide, I have succesfully installed Global, many thanks so to sum things up, to install Global rom you need to:
Unlock your bootloader
Flash TWRP from Xiaomi.eu
Flash Global from first post and WITHOUT rebooting flash region fix from carburano's guide
Now you can reboot to system
Click to expand...
Click to collapse

I think, he never test his guide himself... the rom is the same as in the other link here from italian guy and it is not an fastboot rom. So i wonder, how he flash this file with miui-flash... so i think, he never had flash this.

I've ordered the 8GB-256GB model and it has the Chinese ROM, can I flash the Global ROM regardless of bootloader status etc.

Well this time xiaomi forced me to wait for 360 hours before i can unlock, even though my mi account has unlock permissions since 2016... So i can't yet validate anything.
Thanks for your input. I'll adapt the guide

TheInfiniteAndroid said:
I've ordered the 8GB-256GB model and it has the Chinese ROM, can I flash the Global ROM regardless of bootloader status etc.
Click to expand...
Click to collapse
If anyone can confirm this I'd really appreciate it, thanks

TheInfiniteAndroid said:
If anyone can confirm this I'd really appreciate it, thanks
Click to expand...
Click to collapse
Right now you can't flash with locked bootloader. Maybe it will be possible when Xiaomi releases a fastboot rom. According some users this rom release will be in the next few days.

Bill Power said:
Right now you can't flash with locked bootloader. Maybe it will be possible when Xiaomi releases a fastboot rom. According some users this rom release will be in the next few days.
Click to expand...
Click to collapse
Thank-you for this, I guess I'll just have to hope & wait and see :good:

TheInfiniteAndroid said:
Thank-you for this, I guess I'll just have to hope & wait and see :good:
Click to expand...
Click to collapse
Yes. I'm in the same situation.

Bill Power said:
Yes. I'm in the same situation.
Click to expand...
Click to collapse
I need global because I'll be using it as my daily driver when I go over to the US using Verizon, hopefully the ROM will come out soon

underlines said:
In the original Mi Mix Forum we had a one-in-all thread for all new users, so I try to continue it here.
I will try to mention all people from who I take sources from. If I forgot anyone, please don't hesitate to tell me.
If you have change requests or useful additions, I will try to update the original posts ASAP.
Click to expand...
Click to collapse
Hi,
Don't forget to add "How to install Google Apps", please.
Thanks
EDIT 1; NVM, found it under Chinese rom
EDIT 2: Gapps installation went flawlessly, many many thanks

TheInfiniteAndroid said:
I need global because I'll be using it as my daily driver when I go over to the US using Verizon, hopefully the ROM will come out soon
Click to expand...
Click to collapse
I suggest you to unlock it too. After ROM installation you can lock it again. It seems it will not be possible to flash with a locked bootloader even for an Official Rom.

Bill Power said:
I suggest you to unlock it too. After ROM installation you can lock it again. It seems it will not be possible to flash with a locked bootloader even for an Official Rom.
Click to expand...
Click to collapse
So unlock the bootloader, flash the global ROM, then relock the bootloader and all done?

TheInfiniteAndroid said:
So unlock the bootloader, flash the global ROM, then relock the bootloader and all done?
Click to expand...
Click to collapse
Yes. Now i'm waiting the sms message to finish the process. The OP has all the instructions for unlocking the bootloader if you need it.

Bill Power said:
Yes. Now i'm waiting the sms message to finish the process. The OP has all the instructions for unlocking the bootloader if you need it.
Click to expand...
Click to collapse
So just to sum up, when my Mix 2s comes with the Chinese ROM, I unlock, flash this, then I'm on Global official and can still receive OTA's etc?

TheInfiniteAndroid said:
So just to sum up, when my Mix 2s comes with the Chinese ROM, I unlock, flash this, then I'm on Global official and can still receive OTA's etc?
Click to expand...
Click to collapse
Yes but global rom OTAs of course

where did u find twrp for mix2s? 'cause I havn't found one on their website.

Change log 2018-05-09 04:38AM GMT
Code:
+ Added: Android P developer preview for Mi Mix 2S section
+ Added: Magisk section
- Removed: Xposed section

underlines said:
Change log 2018-05-09 04:38AM GMT
Code:
+ Added: Android P developer preview for Mi Mix 2S section
+ Added: Magisk section
- Removed: Xposed section
Click to expand...
Click to collapse
Thanks underlines. I'm stuck waiting for the sms message. How much time usually does take to receive it?

[Mi CC9] Unlock Bootloader, Install Twrp, Backup and Install Rom

Hlw all.
Sorry for late to write this post. I will write this post in several parts. So Don't angry if i am late.
PART 1:
HOW TO UNLOCK BOOTLOADER
Click to expand...
Click to collapse
First add a xiaomi account on your device.
Now
1. Go settings
2. My Devices
3. All Specs
4.Miui Version
Tap 5 times to activate Developer Option.
Now return settings menu
And Scroll down
Go
1. Additional Settings
2. Developer option
3.OEM Unlocking [ On This]
Now turn on your phone's internet connection through personal data pack.
Now go Mi unlock status and press add account .
Your Device will be added successfully.
You have to wait 10 days for unlock your bootloader.
Xiaomi privacy policy
Click to expand...
Click to collapse
Now Go xiaomi website and Download xiaomi unlock tool .
You will need a pc or laptop with internet connection for this process.
Extract that zip and open Xiaomi unlock.exe
Login your Xiaomi account.
Backup important Documents on your phone.
Click to expand...
Click to collapse
Power off your Phone
Press "Power button + Volume down"
for fastboot mod .
Connect your phone through usb cable
Now press unlock
When it will complete 100%, Your device will unlocked and Reseted.
PART 2:
INSTALL TWRP
Click to expand...
Click to collapse
First you have to Download TWRP. Official twrp is not release. So you have to download unofficial twrp. it is safe and 100% well for Mi cc9. Because i am using this.
Download this from here:
https://androidfilehost.com/?fid=6006931924117916679
And Also download
adb usb driver version 1.4.3.exe
Install this software .
Next you have to enable usb debugging in your device.
Connect via usb cable to your pc or laptop.
Now unzip the twrp file and go that folder .
See many cmd command file in this zip inside.
Just open last one
Now write
adb devices
Click to expand...
Click to collapse
Screen on your phone and Ok the demon they ask.
Next write
adb reboot bootloader
Click to expand...
Click to collapse
Now write
fastboot flash recovery (copy full name of twrp and paste here).img
Click to expand...
Click to collapse
fastboot boot recovery (copy full name of twrp and paste here).img
Click to expand...
Click to collapse
Twrp will install successfully. just disconnect your phone and press power button + volume up.
Twrp will appear which one you install.
Any help you need just comments here if you failed.
Thats all for today.

Hi, I unlocked the Boot Loader but now I get a screeen in chinese which I am assuming is asking for my Mi account,phone number or email but every time I type any of those a red messege showes under the box which I am assuming meanes that something is wrong. Does anyone had the same problem and solution because I am pretty sure I know my Mi account and my phone number and they are tiped in correct.

dragokanev said:
Hi, I unlocked the Boot Loader but now I get a screeen in chinese which I am assuming is asking for my Mi account,phone number or email but every time I type any of those a red messege showes under the box which I am assuming meanes that something is wrong. Does anyone had the same problem and solution because I am pretty sure I know my Mi account and my phone number and they are tiped in correct.
Click to expand...
Click to collapse
Use those phone number and password which one you sing in for unlock bootloader.you need internet connection to complete this process.

im stuck at "fastboot boot recovery (copy full name of twrp and paste here).img"
is it the same file "recovery-TWRP-3.3.1-0709-XIAOMI_CC9-CN-wzsx150.img"?

majigs said:
im stuck at "fastboot boot recovery (copy full name of twrp and paste here).img"
is it the same file "recovery-TWRP-3.3.1-0709-XIAOMI_CC9-CN-wzsx150.img"?
Click to expand...
Click to collapse
Yes. You have to write:
fastboot boot recovery-TWRP-3.3.1-0709-XIAOMI_CC9-CN-wzsx150.img

easier to rename the file to twrp.img .....

Please help to restore CC 9
Please help me bring my Xiaomi CC 9 back to life. I updated it with MIUI 11.3.3.0.PFGEUXM and my device does not boot normally. My bootloader is locked and an account is not installed in the developer settings. Does anyone know what to do ???

I got error -1 on my smartphone when I added account and device in the '' mi unlock status '' menu.
How to solve
--
Edit:
resolved: I logged out and logged into the Mi account on the device and gave no error
I have to wait 168H to unlock
Tks

GSI's are quite good. I have good SOT with ArrowOS GSI: 12h - 13 h. I think it's more interesting to use Pie GSI's for now.

Where can I get this ArrowOs GSI rom?

Unlock tool stops at 50%
What should I do when the Unlock Tool stops at 50% and reports: couldn't verify the device. Is it because I haven't waited the 10 days yet?

You have to wait to unlock bootloader.

majigs said:
im stuck at "fastboot boot recovery (copy full name of twrp and paste here).img"
is it the same file "recovery-TWRP-3.3.1-0709-XIAOMI_CC9-CN-wzsx150.img"?
Click to expand...
Click to collapse
you dont have to boot the image if you flashed it first, if you did 'fastboot flash recovery recoveryname.img', no reason to do the boot part, just do fastboot reboot-recovery
if you dont want to flash twrp over your stock recovery, then use the fastboot boot recoveryname.img and then mess around with twrp, backup everything and flash a new rom and reboot, next time you reboot to recovery, stock will still be there

Hello. I'm having problems unlocking my new phone. When i open Mi unlock tool, unlock option is greyed out.
I installed drivers through unlock app and option "install drivers" Also installed adb drivers that I got with ulock app through device manager - add legacy hardware
But something is wrong. Someone please help me.

axlina said:
Hello. I'm having problems unlocking my new phone. When i open Mi unlock tool, unlock option is greyed out.
I installed drivers through unlock app and option "install drivers" Also installed adb drivers that I got with ulock app through device manager - add legacy hardware
But something is wrong. Someone please help me.
Click to expand...
Click to collapse
In this unlock tool folder ( Install Drider) one file exist.
You must install it. Then your device will connect.

someone please help me. I unlocked bootloader and trying to install TWRP but everytime I try it's stuck at sending recovery. I've waited for 10 minutes and then I qut. What am I doing wrong?
Commands adb devices and fastboot devices recognize my phone.

axlina said:
someone please help me. I unlocked bootloader and trying to install TWRP but everytime I try it's stuck at sending recovery. I've waited for 10 minutes and then I qut. What am I doing wrong?
Commands adb devices and fastboot devices recognize my phone.
Click to expand...
Click to collapse
Unfortunately I can't help you with that but I have a question did you wait 10 days or not cause my phone just refuses to cooperate with the unlock tool. Sometimes the fastboot logo just disapears and it says press any button to shutdown.
Edit: Just to clarify the flash tool does not say anything about the waiting period. If someone can help me or clarify the situation I would greatly appreciate it.
Alright so it appears to either be a USB gen limitation or just my plain ass stupidity for not installing adb drivers. Hell if I know but either way now it says how many days I have to wait so nice.

TelumLetiferum said:
Unfortunately I can't help you with that but I have a question did you wait 10 days or not cause my phone just refuses to cooperate with the unlock tool. Sometimes the fastboot logo just disapears and it says press any button to shutdown.
Edit: Just to clarify the flash tool does not say anything about the waiting period. If someone can help me or clarify the situation I would greatly appreciate it.
Alright so it appears to either be a USB gen limitation or just my plain ass stupidity for not installing adb drivers. Hell if I know but either way now it says how many days I have to wait so nice.
Click to expand...
Click to collapse
Download 15 seconds adb installer and answer question with three yyy.
I waited 43 hours to unlock bootloader.

I have performed all the steps successfully, but unable to boot into twrp by pressing power + vol up, still booting in stock one, anybody facing the same issue?

kingofmb said:
I have performed all the steps successfully, but unable to boot into twrp by pressing power + vol up, still booting in stock one, anybody facing the same issue?
Click to expand...
Click to collapse
It's power button +volume down... Try again

[GUIDE] Rooting the UMIDIGI S5 Pro | Magisk

EDIT: I attached a zip with AIDA64's reports for this phone. One report has Magisk hidden from AIDA64, the other doesn't.
This mostly a copy of _cab13_'s Rooting the UMI F2 post as the same instructions for rooting that phone are how I rooted the S5 Pro. So please give _cab13_ thanks here if this helped you root your phone. I'll take a thanks for removing the orange state warning if I helped you with that
Please be patient when posting questions, I will get back to you as quickly as I can. I just have many responsibilities which take up a great deal of my time.
Rooting the S5 Pro
Disclaimers
This is important, please read thoughtfully.
whatever you do, NEVER EVER use SP Flash Tool in "Format All+Download" mode. This will wipe your IMEI['s]s and some other bad stuff will happen like loss of fingerprint sensor. This cannot be reversed by us.
Once bootloader is unlocked, warranty is considered void. By following this guide, you consent to that happening. Safety net CTS will not pass anymore unless you flash Magisk which hides the unlocked bootloader.
Never re-lock your bootloader while running anything unofficial as the phone will not boot until you unlock again.
And, once again, a lot of bad things can happen like boot loops, if that happens to you, don't freak out! Simply re-flash the stock ROM, redoing the rooting process from the start. It might be time consuming, but that's your safest bet!
More important even, have fun rooting, it's before all a hobby!
Various Resources
>>> Latest official stock ROM <<<
[Non European] UMIDIGI_S5Pro_20210107.V3.04
[European] UMIDIGI_S5Pro.E_20201130.V3.04
Minimal ADB and Fastboot by shimp208
> Magisk (and Manager) by topjohnwu <
Mediatek SP Flash Tool
UMIDIGI Community Forum S5 Pro Thread
Unlocking Bootloader
ATTENTION!! After unlocking the bootloader, all user data in the phone's memory will be lost, so do not forget to throw all the most important things on your computer or flash drive!
1) Activate "Developer options" through Settings > About Phone > Tap Build Number multiple times.
2) Open "Developer options" in Settings > System > Tap Advanced.
Enable "OEM Unlocking" and enter your password to confirm. Enable "USB Debugging" as well.
3) On Windows, download and install Minimal ADB and Fastboot by shimp208
On Linux, use your package manager to install android-tools-adb and android-tools-fastboot
4) Open command prompt (Win + R > type cmd) or a terminal on linux.
5) Plug your phone, accept the prompt about adb and the PC signature.
6) Type adb reboot bootloader to reboot in fastboot mode. Unplug your cable from your phone
and replug it after fastboot is printed at the bottom of the screen.
THESE NEXT TWO STEPS WILL COMPLETELY WIPE YOUR DATA
7) Unlock the bootloader using fastboot flashing unlock and pressing Vol+
8) Unlock the secure partitions using fastboot flashing unlock_critical and pressing Vol+
9) Restart using fastboot reboot
You will now always see "Orange State" at boot; this is completely fine and will only delay your boot by 5 seconds.
Rooting using Magisk patched boot.img
This is "experimental" and is probably overkill, but everyone managed to install Magisk with it.
1) Clean install UMIDIGI_S5Pro_20200702.V3.02 (or the European one) with SPFT by selecting the scatter file, pressing download an rebooting the phone
(Make sure it is in "Download Mode" and not "Format + Download")
2) Patch boot.img by copying it to your device, using Magisk Manager to patch it, and get back the magisk_patched.img in the Download folder back to your PC.
3) Start ADB while booted; run adb reboot bootloader. Alternative is to reboot to recovery and selecting "reboot to bootloader"
4) unlock if not already done with fastboot flashing unlock followed by fastboot flashing unlock_critical
5) In the following code, the vbmeta.img and the recovery.img are the stock files from the ROM you downloaded and extracted.
Code:
fastboot erase boot
fastboot --disable-verity --disable-verification flash boot magisk_patched.img
fastboot --disable-verity --disable-verification flash recovery recovery.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot
When rebooting, install Magisk Manager. It will prompt to finalize the installation, you can do so.
Congratulations ! You are now a proud Magisk user ! All credits goes to @topjohnwu he's the real MVP here.
Returning to stock / Resolving issues
The best way to resolve any issue is to return to stock. Here is the method.
1) Download latest stock ROM on UMIDIGI's forums
2) Download SP Flash Tool if you don't have it yet (Windows only)
3) Extract stock ROM in SP Flash Tool directory. Refer to Flash Tool guide if needed.
4) Open SP Flash Tool, Download Tab, "Choose" in Scatter-loading file, select the scatter file in the stock ROM directory.
5) If you want to keep your data, untick "userdata" partition. MAKE SURE FORMAT IS NOT SELECTED!
6) Press Download and connect your device via USB. Reboot the phone or turn it off and everything will be flashed.
7) If you want a full stock experience, I recommend relocking the bootloader so that SafetyNet will pass. Get into fastboot mode by using adb reboot bootloader and use fastboot flashing lock_critical followed by fastboot flashing lock. This will wipe your data once more.
You should be good to go.
ONE LAST THING
Get rid of your orange state warning.
Download the attached zip file and extract.
Put your phone into fastboot and:
Code:
fastboot erase lk
fastboot erase lk2
fastboot flash lk lk_patched.img
fastboot flash lk2 lk_patched.img
fastboot reboot
No more orange state warning! Reflash the stock lk before unrooting, though.
ATTACHED LK FILE IS FOR UMIDIGI S5 Pro ONLY.

Thank you for re-posting this as an option to root the S5. I did get stuck on flashing the recovery. I have tried a few times and every time it just flashes orange , restarts and loads normally. I have verified root.
i have used the recovery found here
https://forum.xda-developers.com/android/general/guide-rooting-umidigi-s5-pro-magisk-t4151183
I have no success installing TWRP. Do you know if twrp has a recovery that will work?

Hey guys it's me again !
Got some good news : I bought a S5 Pro as well
And I ABSOLUTELY LOVE IT !
I might get into rooting it soon, idk.
Thanks for the shout-out @zerosava

hermeez said:
Thank you for re-posting this as an option to root the S5. I did get stuck on flashing the recovery. I have tried a few times and every time it just flashes orange , restarts and loads normally. I have verified root.
i have used the recovery found here
https://forum.xda-developers.com/android/general/guide-rooting-umidigi-s5-pro-magisk-t4151183
I have no success installing TWRP. Do you know if twrp has a recovery that will work?
Click to expand...
Click to collapse
No luck for me finding a custom recovery (twrp or anything else.)
If you have any exp with them, see if you can make the F2's (found in the F2 root thread) work. It SHOULD only need a minumum of tweaking, just to account for the (afaik) slight soc differences. i'm not gonna hold my breath. there seems to be a void when it comes to enthusiasm for this phone. by my serial no, i have the 4832nd phone manufactured. compared to serials ranging from 22000- 189000 for my other umis (f1play, s3pro, f2, power3)

I think I'll try making TWRP soon for it.
The F2 TWRP would not be usable this easily, it's easier to start fresh.
If anyone wants to try, download the sources for the F2 TWRP on my GitHub, then you need to extract the stock kernel and replace the F2's with the S5pro's

root working thanx

Hi guys ,i lost the imei on my phone and have the" Googlekeystate:fail", how can i fix them, thanks for you help.

QUICKLARA said:
Hi guys ,i lost the imei on my phone and have the" Googlekeystate:fail", how can i fix them, thanks for you help.
Click to expand...
Click to collapse
Sorry, but I made this clear in the original post:
Disclaimers
This is important, please read thoughtfully.
whatever you do, NEVER EVER use SP Flash Tool in "Format All+Download" mode. This will wipe your IMEIs and some other bad stuff will happen like loss of fingerprint sensor. This cannot be reversed by us.
I do not know how to help you. My only suggestion is to post your problem in UMIDIGI's forum here: UMIDIGI Forum
If anyone can help you, that's where to find them.

Please I need your help I reset it wrong with SP Flash Tool and now I get Googlekeystate: fail and it doesn't grab my fingerprint I'm desperate I need a solution please

Ruiz702 said:
Please I need your help I reset it wrong with SP Flash Tool and now I get Googlekeystate: fail and it doesn't grab my fingerprint I'm desperate I need a solution please
Click to expand...
Click to collapse
I am sorry, but you will have to contact UMIDIGI support. Only they can help you as far as I know. I feel for you, I really do. I did this when I was a newbie with my F1 Play.

QUICKLARA said:
Hi guys ,i lost the imei on my phone and have the" Googlekeystate:fail", how can i fix them, thanks for you help.
Click to expand...
Click to collapse
hello, good and bad news.. fix but fingerprints are lost for good
https://community.umidigi.com/forum.php?mod=viewthread&tid=19722&extra=&page=1

Ruiz702 said:
Please I need your help I reset it wrong with SP Flash Tool and now I get Googlekeystate: fail and it doesn't grab my fingerprint I'm desperate I need a solution please
Click to expand...
Click to collapse
hello, good and bad news.. fix but fingerprints are lost for good
https://community.umidigi.com/forum.php?mod=viewthread&tid=19722&extra=&page=1

i followed the instructions but i got stuck after step 4 it would be nice if this had a video walkthrough thanks for the guide though =w= 10/10 would try to root again lol

hello folks,
This message is not about rooting s5 but rather about downgrading. I posted on the umidigi forum but have not received an answer. So the problem is the new OTA update that they pushed out yesterday. After update I lost 4G connectivity and i am unable to restore it. I want to roll back to the previous update. They have the roms available on the forum and I downloaded one but what I am not sure is can I use SP flash tool to just download the older ROM version on top of the new one?
I see lots of manuals on how to update but how do I safely downgrade?
Any help is greatly appreciated.
Sticks

stick2020 said:
hello folks,
This message is not about rooting s5 but rather about downgrading. I posted on the umidigi forum but have not received an answer. So the problem is the new OTA update that they pushed out yesterday. After update I lost 4G connectivity and i am unable to restore it. I want to roll back to the previous update. They have the roms available on the forum and I downloaded one but what I am not sure is can I use SP flash tool to just download the older ROM version on top of the new one?
I see lots of manuals on how to update but how do I safely downgrade?
Any help is greatly appreciated.
Sticks
Click to expand...
Click to collapse
Do a "download only" flash of the "super", " vbmeta_system", and "vbmeta_vendor" partitions only (uncheck all other partitions) from the previous ROM. That should do it.

ZeNNoP said:
i followed the instructions but i got stuck after step 4 it would be nice if this had a video walkthrough thanks for the guide though =w= 10/10 would try to root again lol
Click to expand...
Click to collapse
What precisely stuck you?

There is a new update firmware please make a rooting tutorial on youtube.,

Somebody made a custom TWRP and posted it on here. So if that'll help anyone out and get them to make a tutorial video, that be great. 'Cause I'm reading this over and over again, and I think I can do it, but I'm being very hesitant about it. And it's getting me all frustrated. I had it on "Flash Mode". And when I continued typing it out, it didn't go through and that had me on a raging panic attack. Luckily, it didn't mess up. But now I'm more hesitant. Please make a quick tutorial, doesn't even have to be perfect...
TWRP is at the bottom of this page:
[MT6785]How To Root Umidigi S5 Pro And Install TWRP 3.4.0 Recovery ~ Techswizz
To Root Umidigi S5 Pro, we will be using the Adb Tool Mode with TWRP recovery for Umidigi S5 Pro. It will be wise to read the post very well before flashing the recovery to avoid any Device errors or brick.
www.techswizz.com

Thanks for this guide. I am completely lost with step 7 and 8. What does the Unlock the bootloader using fastboot flashing unlock and pressing Vol+ mean?????? Where do you enter the unlock code and what is it?

bmaz121 said:
Thanks for this guide. I am completely lost with step 7 and 8. What does the Unlock the bootloader using fastboot flashing unlock and pressing Vol+ mean?????? Where do you enter the unlock code and what is it?
Click to expand...
Click to collapse
I am able to get FastBoot Mode on my screen (through step 6). I plug the phone back in per directions & I hear the Windows device connected chime.
I type: fastboot flashing unlock in the same cmd window
and I get "<waiting for any device>" in the cmd window and it hangs.
Every few seconds I hear the Windows device disconnected noise, but no device connect chime. This lasts indefinitely.
I repeated step 7 several times with variations with the Vol+ button: pressing first, holding down while pressing enter in cmd window, pushing afterward, holding down afterward, etc. Same results as described above.
Any help available? Should I not unplug my phone from the PC? The F2 directions did not require that.
thanks!

[CLOSED][GUIDE] Unlock Bootloader, Install TWRP/Pitch black Recovery in Realme 5(RMX1911)

Code:
By Doing this, You may Void your warranty..
Neither Me nor XDA is Responsible for any Damage Caused for Your Mobile..
If you show Finger at me, I'll laugh at you..
Why there is need for this Guide?
When I got my Realme 5, I wanted to Unlock the Bootloader, Install the TWRP Recovery, root it and finally Install a Custom ROM. So, I've Searched for it and Finally Disappointed B'coz many Guides were wrong and some were Very Old and Outdated Guides.. So I've Researched and now with many problems, Finally I've Unlocked the Bootloader, installed TWRP and finally Flashed LineageOS 17.1.. So, this Guide saves your time, I've Included the Steps What I did, you guys can simply follow it..
This Guide is only applicable for Realme 5(rmx1911) and not for Realme 5i, Realme 5s or Realme 5 Pro..
Click to expand...
Click to collapse
Things You need to Continue :
A Windows Laptop/PC (Windows because, I am showing the Procedure with Windows)
Minimal ADB and FastBoot
Recovery (I've flashed PitchBlack Recovery, but you can also do this procedure with TWRP recovery)
Of course a Realme5 (rmx1911)
In-Depth Test apk
All the Download Links of above files are in Attachments..
Click to expand...
Click to collapse
Procedure :
Steps to Downgrade from RealmeUI 1 to ColorOS 6
If you're in Latest android 10 RealmeUI, first you need to downgrade to ColorOS 6 android pie.
To do so, download ColorOS package(.ozip package) from below link.
Open this .ozip package with File Manager app and Locate this package.
Click on that package, A pop-up will appear, In that Select "Upgrade Now" or something like that..
It will wipe your data and It will boot into ColorOS setup, Complete the Setup..
Users who are in ColorOS 6, need not to follow above Steps!
Click to expand...
Click to collapse
Steps to Unlock Bootloader:
Enable developer options in settings and enable OEM Unlocking, USB Debugging from Developer Options from Settings.
Download and Install In-Depth apk from attachments.
Open it and Click on Start Applying.
After 20min Open app and click on "Query Verification Status" .(if you dont see like this wait for some moretime, maximum it will take upto 24hours only)
If you see something like "Review Successful", You are good to go..
Select "Start the in-depth test", You will be forwarded to fast boot mode..
Connect the mobile to PC.
Now comes the role of PC/Laptop, Download the Fastboot and Minimal ADB, Recovery.img and vbmeta.img From the attachments.
Extract that fastboot zip in some Directory, Copy the recovery.img and vbmeta.img to the fastboot folder.
Open the Minimal ADB and Fastboot and in that open "cmd-here.exe"
Type "fastboot devices", then enter, You should see something like serial number.
Type "fastboot flashing unlock", then enter, now check ur phone you will see something like "Unlock" or similar to something..
You need to select the Unlock with the help of volume button and select with power button.
After Selecting "Unlock" all data will be deleted and Your Phone will be unlocked..
HURRAY, YOUR PHONE IS UNLOCKED
Installing Pitchblack Recovery :
After Unlocking Phone all the Data will be deleted, complete the setup wizard and enable USB Debugging.
Connect the Phone to PC via USB.
Open ADB Fastboot folder and select "cmd-here.exe".
Type "adb devices" you should see something like Serial Number.(If you did not see, re-insert the phone cable to another port and check)
Type "adb reboot fastboot", You will be forwarded to Fastboot mode.
Type "fastboot flash recovery recovery.img"
Type "fastboot flash vbmeta vbmeta.img"
Disconnect the Mobile from PC, then click on Volume down Button Until you get Something Like "Recovery" and Select using Power Button.
HURRAY! YOU'VE INSTALLED RECOVERY
IF YOU WANT TO ROOT YOUR DEVICE, DOWNLOAD MAGISK AND INSTALL IT FROM RECOVERY
Click to expand...
Click to collapse
IF YOU WANT TO GO TO RECOVERY AGAIN JUST BOOT INTO FASTBOOT(Power-off Your device, click on volume down button and power button simultaneously, within few seconds you will boot into fastboot) THEN CLICK ON VOL- BUTTON UNTIL YOU GET RECOVERY OPTION, THEN SELECT IT USING POWER BUTTON
Click to expand...
Click to collapse
You've Unlocked BL, flashed RECOVERY, Installed Magisk, Now what? Go and Search for your Favourite ROMs and flash them
Realme 5 Downgrade package link
{Mod edit}
triplr_dev_users
Test forum for ROM Builders !
All roms Welcome, All devices welcome!
Samsung Note 3,4 Qualcomm and exynos 5433
Galaxy Tab S2
Realme 5(rmx1991)
All things RPi 4 Family
An open discussion on Tech, Dev and Life
Welcome .
Rule 1. Have fun
Rule 2. Be nice
{Mod edit}

Reserved

supper sir i have very usefull i have flashed a lineage 17.1

with ur guide and i have unlocked boot lodder also thank u very much well done sir

Sensui--moksha said:
supper sir i have very usefull i have flashed a lineage 17.1
Click to expand...
Click to collapse
Glad, this helped!!

Why happend like this in depth test ?

Bebe's said:
Why happend like this in depth test ?
Click to expand...
Click to collapse
Sorry for the delay bro, I think you can't unlock the bootloader of Your Phone, bcoz it is not directly from the realme, I mean the phone which u bought is customized by your sim(carrier) company

Hello. The Downgrade file is not in the attachments thanks

nezuxiv said:
Hello. The Downgrade file is not in the attachments thanks
Click to expand...
Click to collapse
dude I have updated the post with the link to downgrade package, by the way thanks for informing

bro by installing pictblack recovery my phone got in a recovery bootloop and internal storgae is not showing ay files help pls

smarty7880 said:
bro by installing pictblack recovery my phone got in a recovery bootloop and internal storgae is not showing ay files help pls
Click to expand...
Click to collapse
Did you flash vbmeta.img ?

does the downgrade firmware supports realme in philippines ? thank you so much sir.

I am at color os v7 I also need to downgrade fast reply will be appreciated

Dar_shan_11 said:
I am at color os v7 I also need to downgrade fast reply will be appreciated
Click to expand...
Click to collapse
Yes, You need to downgrade...

I unlocked my bootloader ..than I installed recovery and after than I installed vbmeta.img
After that I tried to install Havoc Os.
Now I'm stuck at bootloop, can you help me

I must be blind but I can't find the downgrade file in your attachments...
(Edit) Never mind, it's not in the attachments. ^^;

Is there any guide to do it on realms UI?

i have RMX1911ex_11_A.31.
i should follow steps from Unlock Bootloader
correct?

It dœsn't work: my phone just comes back to the fastboot…