Droid Turbo (quark) not booting - Moto Maxx Q&A, Help & Troubleshooting

About a year ago I downgraded my quark to android 4.4.4, though it started an automatic update to marshmallow, and after it finished, I was presented with this (picture is in a attachment) afaik the bootloader is or was unlocked. I tried flashing stock but it fails.

sambow23 said:
About a year ago I downgraded my quark to android 4.4.4, though it started an automatic update to marshmallow, and after it finished, I was presented with this (picture is in a attachment) afaik the bootloader is or was unlocked. I tried flashing stock but it fails.
Click to expand...
Click to collapse
You have to flash the same or newer firmware you had before you downgraded. Your bootloader is still whatever that is before you downgraded to 4.4.4.
The only way you can flash older is to leave off the bootloader as well as leave off gpt.bin. That's what you did when you went back to 4.4 4. But this automatic update was STILL probably older than what you were on a year ago. So, it borked your phone because it was flashing older bootloader and gpt.bin files.
Sent via open market LG US998 V30/V30+

I came from a custom rom, so i guess that means I'm out of luck since i can't flash twrp.

sambow23 said:
I came from a custom rom, so i guess that means I'm out of luck since i can't flash twrp.
Click to expand...
Click to collapse
I didn't say anything about flashing TWRP.
When you downgraded to stock 4.4.4 you didn't use TWRP. Flash the stock firmware the normal way.
You flashed stock firmware, but had to leave off bootloader and gpt.bin.
When you allowed the automatic update to happen (to older Marshmallow than what you had before you downgraded), you broke that rule.
Sent via open market LG US998 V30/V30+

Related

Issues sideloading 5.0.1

So ive been racking my brain for the last 2 hours trying to figure this out and im still stuck. I just finished unlocking my boot loader on a completely stock nexus 5 running 4.4.4
i used this methodfor unlocking my bootloader
https://www.youtube.com/watch?v=2cOUseflKNE
I then downloaded 5.0.1
785a2f7af3718dba7e569decde8b6c4dc476a309.signed-hammerhead-LRX22C-from-LRX21O.785a2f7a.zip
i then tried side loading the zip using this method
https://www.youtube.com/watch?v=uvch38KDmTk
but i get one of 2 messages, no device found or waiting on device. nothing happens either way
i then tried
http://www.androidcentral.com/how-manually-upgrade-your-nexus?pg=4#content
and got the same message
what am I doing wrong or missing. My boot loader is showing as unlocked
You have to upgrade to 5.0, and then sideload 5.0.1 on top of 5.0. Or you can flash the 5.0.1 factory image.
EDIT: The messages you're getting are probably because you don't have the correct ADB drivers: http://forum.xda-developers.com/showthread.php?t=2588979
I re downloaded that version of adb and im currently downloading 5.0
I got it! I did what u said and download 5.0 and restarted my pc and everything worked, Ill try to sideload 5.01 later
Why flash the 5.0 image just to flash the 5.0.1 OTA when you can just flash the 5.0.1 image?
Wakamatsu said:
Why flash the 5.0 image just to flash the 5.0.1 OTA when you can just flash the 5.0.1 image?
Click to expand...
Click to collapse
Because its so easy, we must insert unnecessary steps to get a feeling of achievement
Wakamatsu said:
Why flash the 5.0 image just to flash the 5.0.1 OTA when you can just flash the 5.0.1 image?
Click to expand...
Click to collapse
Don't think he flashed the image. I think he applied the 5.0 OTA via sideload, then he's going to apply the 5.0.1 OTA in the same manner. Doing that will allow him to not wipe his data. Kinda makes sense since that's how Google intends for it to progress if he just waits for the updates.
Yaz75 said:
Doing that will allow him to not wipe his data.
Click to expand...
Click to collapse
He unlocked his bootloader in fastboot. The phone is wiped.
Yaz75 said:
Kinda makes sense since that's how Google intends for it to progress if he just waits for the updates.
Click to expand...
Click to collapse
Google intended things to be easy with OTA, not optimal, imo.

(help) how to install official 6.0 using twrp on moto g3

Im still on 5.1.1 official version and my device is bootloader unlocked and twrp installed help me how to install official 6.0 version
First just flash 6.0 image through fastboot process in this twrp will be replace with stock recovery, Second flash someone's 6.0 Nandroid backup through TWRP...
Sent from my Toilet using Moto G3....
I have also same query, having xt1550 with 5.1.1 and unlocked bootloader with root access.
Also receiving OTA notification but can't install the same.
Tried to install OTA manually but could not go into recovery mode stuck on "No Command" screen.
Please guide....
beworld16 said:
I have also same query, having xt1550 with 5.1.1 and unlocked bootloader with root access.
Also receiving OTA notification but can't install the same.
Tried to install OTA manually but could not go into recovery mode stuck on "No Command" screen.
Please guide....
Click to expand...
Click to collapse
You can't flash OTA with root. You can look at the other thread on factory firmware and flash a Marshmallow factory image if one is available for your model. That is safer than flashing an OTA anyway.
Tel864 said:
You can't flash OTA with root. You can look at the other thread on factory firmware and flash a Marshmallow factory image if one is available for your model. That is safer than flashing an OTA anyway.
Click to expand...
Click to collapse
That's very much true.. Don't flash ota with TWRP with having root access..
Sent from my Moto G(Osprey)
Thanks for the reply
I have downloaded Official Firmware of 6.0 for XT1550 from here.
So Now, can i process with this using fastboot command.
If yes, will it look the bootloader ?
Tel864 said:
You can't flash OTA with root. You can look at the other thread on factory firmware and flash a Marshmallow factory image if one is available for your model. That is safer than flashing an OTA anyway.
Click to expand...
Click to collapse
I thought OTA's worked fine with root installed, although you often lose root in the process, it was custom recovery they burped at?

[HELP] how to downgrade Galaxy S6 from LATEST 6.0.1 (DPFX BL) to 5.1.1

hi, i really want to downgrade my S6 to lollipop but i have one of the latest bootloader (DPFX).
Downgrade was perfectly possible when i was on first build of marshmallow, but now, since i upgraded to DPFX bootloader, i have only fails with odin, and bootloops with custom roms...
is there any solution? if only i could flash an older bootloader, then i will be saved.
but if i flash an old bootloader with odin, i have a fail, so i don't know what to do
Some people suggested to me to use an old TWRP backup and i found it on my pc (with all partitions files: bootloader,system,radio and data, but i didn't use data) but using it, it's the same of flashing a custom rom: bootloop, and i suspect that the old bootloader never was flashed.
help
cescof said:
hi, i really want to downgrade my S6 to lollipop but i have one of the latest bootloader (DPFX).
Downgrade was perfectly possible when i was on first build of marshmallow, but now, since i upgraded to DPFX bootloader, i have only fails with odin, and bootloops with custom roms...
is there any solution? if only i could flash an older bootloader, then i will be saved.
but if i flash an old bootloader with odin, i have a fail, so i don't know what to do
Some people suggested to me to use an old TWRP backup and i found it on my pc (with all partitions files: bootloader,system,radio and data, but i didn't use data) but using it, it's the same of flashing a custom rom: bootloop, and i suspect that the old bootloader never was flashed.
help
Click to expand...
Click to collapse
If you are on a newer mm bootloader then downgrading to lollipop is not possible
sofir786 said:
If you are on a newer mm bootloader then downgrading to lollipop is not possible
Click to expand...
Click to collapse
I knew this, but i want to know if there is a way, a not official way, like reinstalling bootloader in a forced way that doesn't care about security problems... this thing has no sense.... why totally prevent to downgrade? However, i thing it's NORMALLY impossible, but not
TOTALLY impossible
cescof said:
I knew this, but i want to know if there is a way, a not official way, like reinstalling bootloader in a forced way that doesn't care about security problems... this thing has no sense.... why totally prevent to downgrade? However, i thing it's NORMALLY impossible, but not
TOTALLY impossible
Click to expand...
Click to collapse
As far as I know if you're on a newer bootloader official or not there is no current method to downgrade. Maybe a phone shop has specialist equipment to do this but that's me taking a shot in the air
I was able to downgrade but not because i wanted, i flashed a corrupt firmware with ODIN and i have to do an emergency recovery with Smart Switch, my carrier doesn't have Marshmallow on the S6 so my phone restored in Lollipop

Moto G4 Plus US XT1644 Stock Unmodified 6.0.1 TWRP Backup & Recovery/Logo Images

Moto G4 Plus US Variant XT1644
Build# MPJ24.139-64 Android 6.0.1
Stock Unmodified TWRP Backup
Stock Recovery.img & Logo.bin​
Description:
I could not find ANY stock images for the US XT1644 variant so I made my own for others that have modified their system partition and wish to restore to a factory state and take the 7.0 update. Backup created on a factory reset unmodified stock build (not previously rooted/xposed/modified in any way) via fastboot booting TWRP w/system write disabled. Stock recovery and logo extracted via DD from stock rooted rom after TWRP backup was made. I pulled the recovery and logo images as these are the most commonly modified partitions (other than the system). This backup will work if you stayed on 6.0.1 and rooted/exposed/changed boot logo/etc. If you played with the 7.0 updates made for other variants, I honestly don't know if this will work for you to take the OTA as the bootloader/modem were likely modified - Test and let us know.
Directions:
-Have ADB working on your PC (google it, not getting into that here)
-Download TWRP backup here: https://mega.nz/#F!vBgU3QJB!R5J5RgZkvUiWHwmIfN6BkA
-Move backup to your proper TWRP backup location on your sd or external sd
-Restore backup via TWRP and reboot
-Download stock recovery & logo images here: https://mega.nz/#F!eBpB3Z5C!J6hoLKdfcObSLavWCsLnyw
-Power off device/plug into pc/hold volume down for 5 seconds/press and hold power & volume down until fastboot appears
-Move files to adb location (Windows) or open terminal where you downloaded the files (Linux) on your pc
-Verify connection
Code:
fastboot devices
-Restore stock recovery:
Code:
fastboot flash recovery recovery.img
-Restore stock logo (if you changed it previously to get rid of warning):
Code:
fastboot flash logo logo.bin
-Reboot and enjoy stock 6.0.1 and be able to take OTA
You are the mvp here!
I have the exact model, and it worked out great
When I was setting up as a new device, it showed some errors like SystemUI stopped working, and File Manager, theres a way to fix that?
Will it show any problems in the future? Of those same ones?
My Compilation Number is "MPJ24.139-48", should be ...64
In stock recovery says i'm at MPJ24.139-64/65
Edit* I had to flash a XT1625-XT1644 MPJ24.139-64 Firmware, then I wiped the OS with TWRP, then I restored your backup and worked like a charm, now running 6.0.1 MPJ24.139-64 with no problems :laugh::good:
panchoarcia said:
You are the mvp here!
I have the exact model, and it worked out great
When I was setting up as a new device, it showed some errors like SystemUI stopped working, and File Manager, theres a way to fix that?
Will it show any problems in the future? Of those same ones?
My Compilation Number is "MPJ24.139-48", should be ...64
In stock recovery says i'm at MPJ24.139-64/65
Click to expand...
Click to collapse
You must have been on the release prior to the one I was on when I got the phone this December. Something is not matching up. You likely have a different bootloader, and modem. When I get a chance I'll extract as many partitions that I can get access too for fastboot flashing. I'll try to do it later on this evening. It really sucks Moto won't give us full firmware for this phone.
Sent from my XT1575 using Tapatalk
annoyingduck said:
You must have been on the release prior to the one I was on when I got the phone this December. Something is not matching up. You likely have a different bootloader, and modem. When I get a chance I'll extract as many partitions that I can get access too for fastboot flashing. I'll try to do it later on this evening. It really sucks Moto won't give us full firmware for this phone.
Click to expand...
Click to collapse
I Will flash stock xt1644 firmware 64, then i restore your backup
Does XT1644 have an OTA available now? I didn't think it was pushed yet.
pupamonkey said:
Does XT1644 have an OTA available now? I didn't think it was pushed yet.
Click to expand...
Click to collapse
It's not available, we're still waiting for it, that's why we flashing stock firmware again
Thanks for doing this! It's essentially what I did to get the marshmallow update (restore stock system & boot via TWRP, then recovery & logo via fastboot).
Please let us know when you see moto/Lenovo push out the nougat update via OTA!
Sent from my Moto G4 Plus using Tapatalk
you are the champ!! i have exact same model but i am yet to update to 64 release as i just got the phone today. Just doing some research before i grease my hands! thanks man!
Sigh... Sitting here in California with an XT1644. I restored the last official stock firmware (Marshmallow Build #: MPJ24.139-64), and the OTA update simply check says my "Software is up to date!". With India variants having received Nougat back in December, I'm wondering WTF is taking so long?
I'm mostly interested in getting the updated baseband, as I'm now running @Silesh.Nair's unofficial LinageOS Nougat with few issues. I guess I'll keep waiting for the official modem update for this device in this country.
Hmmph.
bmeek said:
Sigh... Sitting here in California with an XT1644. I restored the last official stock firmware (Marshmallow Build #: MPJ24.139-64), and the OTA update simply check says my "Software is up to date!". With India variants having received Nougat back in December, I'm wondering WTF is taking so long?
I'm mostly interested in getting the updated baseband, as I'm now running @Silesh.Nair's unofficial LinageOS Nougat with few issues. I guess I'll keep waiting for the official modem update for this device in this country.
Hmmph.
Click to expand...
Click to collapse
Yeah, the US variant xt1644 still has not gotten the 7.0 update. So friggen annoying!! That's basically what I'm doing too, waiting for is the official OTA just for the radio. I'd rather have the 7.0 baseband/firmware before I start flashing any custom roms.
where to check?
i have the us variant from best buy as well , but i twicked it a lot .
How can i know when a nougat release is available? where can i check .
panchoarcia said:
You are the mvp here!
I have the exact model, and it worked out great
When I was setting up as a new device, it showed some errors like SystemUI stopped working, and File Manager, theres a way to fix that?
Will it show any problems in the future? Of those same ones?
My Compilation Number is "MPJ24.139-48", should be ...64
In stock recovery says i'm at MPJ24.139-64/65
Edit* I had to flash a XT1625-XT1644 MPJ24.139-64 Firmware, then I wiped the OS with TWRP, then I restored your backup and worked like a charm, now running 6.0.1 MPJ24.139-64 with no problems :laugh::good:
Click to expand...
Click to collapse
Where did you find file XT1625-XT1644 MPJ24.139-64 Firmware?
Did you flash it in TWRP as a zip file or fastboot?
Did you still have to fastboot stock recovery & logo images?
I'm on a unlocked bootloader/TWRP installed/rooted on MPJ24.139-48. Trying to get back to STOCK.
Hymizzle said:
Where did you find file XT1625-XT1644 MPJ24.139-64 Firmware?
Did you flash it in TWRP as a zip file or fastboot?
Did you still have to fastboot stock recovery & logo images?
I'm on a unlocked bootloader/TWRP installed/rooted on MPJ24.139-48. Trying to get back to STOCK.
Click to expand...
Click to collapse
If you flash a XT1625-XT1644 firmware and you use it "normally" on a XT1644, at some point you will have ghost touch even with low brightness, but...
For upgrading, I'll recommend flashing XT1625-XT1644, (cause there's no
...139-64 XT1644 firmware, just a firmware for both)
Flash it via fastboot, boot it up, flash TWRP recovery, wipe the full system with it, download the TWRP backup that was posted here, restore it, then via fastboot flash the stock recovery (for removing TWRP) and stock logo, then you will have MPJ24.139-64 with no problems, just waiting for nougat OTA for retus version.
Here's the link for retus firmwares: https://mirrors.lolinet.com/firmware/moto/athene/official/RETUS/
didn't work from be coming back from flashing nougat firmware, didnt expect it to just pointing it out
TheDude1998 said:
didn't work from be coming back from flashing nougat firmware, didnt expect it to just pointing it out
Click to expand...
Click to collapse
Yeah I wouldn't think so, but thanks for letting us know.
Sent from my XT1575 using Tapatalk
getting the Nougat OTA
annoyingduck said:
Yeah, the US variant xt1644 still has not gotten the 7.0 update. So friggen annoying!! That's basically what I'm doing too, waiting for is the official OTA just for the radio. I'd rather have the 7.0 baseband/firmware before I start flashing any custom roms.
Click to expand...
Click to collapse
So now that an update to Nougat is getting pushed to xt1644 devices in the 'States, I'm having some challenges successfully applying the update with my unlocked bootloader.
I believe I've got the correct system, boot, logo & recovery images; I'm able to boot up, download the OTA, and initiate the update. Unfortunately, the update process eventually displays the green android character on its back with the red error symbol.
I was hoping to get the update, with the proper local and updated baseband, without going all the way back to stock with the locked bootloader, etc.
I know i had taken the October Marshmallow security update OTA with an unlocked bootloader... Can anyone share the minimum requirements for the current Nougat OTA?
Edit: I went ahead and returned my US xt1644 to the latest stock Marshmallow firmware (MPJ24.139-64) via fastboot and the script commands listed in this post by @yeshwanthvshenoy. Though I left the bootloader unlocked, the phone booted up and went through the OTA Nougat update process without any issue.
I stayed on the new/updated stock Nougat ROM just long enough to confirm that it's working well I'm on my network (Verizon LTE/CDMA), then I flashed @Shreps' build of TWRP 3.1 and backed up every partition before restoring @Silesh.Nair's LineageOS-based InvictaOS. At last I have an up-to-date baseband (M8952_70030.25.03.62R) and appear to have no issues on custom Nougat ROMs - fingerprint registration works fine, for example.
Sent from my Moto G4 Plus using Tapatalk
bmeek said:
So now that an update to Nougat is getting pushed to xt1644 devices in the 'States, I'm having some challenges successfully applying the update with my unlocked bootloader.
I believe I've got the correct system, boot, logo & recovery images; I'm able to boot up, download the OTA, and initiate the update. Unfortunately, the update process eventually displays the green android character on its back with the red error symbol.
I was hoping to get the update, with the proper local and updated baseband, without going all the way back to stock with the locked bootloader, etc.
I know i had taken the October Marshmallow security update OTA with an unlocked bootloader... Can anyone share the minimum requirements for the current Nougat OTA?
Edit: I went ahead and returned my US xt1644 to the latest stock Marshmallow firmware (MPJ24.139-64) via fastboot and the script commands listed in this post by @yeshwanthvshenoy. Though I left the bootloader unlocked, the phone booted up and went through the OTA Nougat update process without any issue.
I stayed on the new/updated stock Nougat ROM just long enough to confirm that it's working well I'm on my network (Verizon LTE/CDMA), then I flashed @Shreps' build of TWRP 3.1 and backed up every partition before restoring @Silesh.Nair's LineageOS-based InvictaOS. At last I have an up-to-date baseband (M8952_70030.25.03.62R) and appear to have no issues on custom Nougat ROMs - fingerprint registration works fine, for example.
Click to expand...
Click to collapse
If i fash stock mm via adb will my bootloader still unlock? and if upgrade via ota, bootloader still unlock too?
dedik46 said:
If i fash stock mm via adb will my bootloader still unlock? and if upgrade via ota, bootloader still unlock too?
Click to expand...
Click to collapse
Yes your bootloader will still be unlocked unless you specifically enter the oem lock command. Read the tutorials, they all explain how to keep your bootloader unlocked.
Sent from my XT1575 using Tapatalk
bmeek said:
So now that an update to Nougat is getting pushed to xt1644 devices in the 'States, I'm having some challenges successfully applying the update with my unlocked bootloader.
I believe I've got the correct system, boot, logo & recovery images; I'm able to boot up, download the OTA, and initiate the update. Unfortunately, the update process eventually displays the green android character on its back with the red error symbol.
I was hoping to get the update, with the proper local and updated baseband, without going all the way back to stock with the locked bootloader, etc.
I know i had taken the October Marshmallow security update OTA with an unlocked bootloader... Can anyone share the minimum requirements for the current Nougat OTA?
Edit: I went ahead and returned my US xt1644 to the latest stock Marshmallow firmware (MPJ24.139-64) via fastboot and the script commands listed in this post by @yeshwanthvshenoy. Though I left the bootloader unlocked, the phone booted up and went through the OTA Nougat update process without any issue.
I stayed on the new/updated stock Nougat ROM just long enough to confirm that it's working well I'm on my network (Verizon LTE/CDMA), then I flashed @Shreps' build of TWRP 3.1 and backed up every partition before restoring @Silesh.Nair's LineageOS-based InvictaOS. At last I have an up-to-date baseband (M8952_70030.25.03.62R) and appear to have no issues on custom Nougat ROMs - fingerprint registration works fine, for example.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
I had the exact same issue, and your solution worked perfectly. It's unfortunate how difficult Motorola has made it to find the stock firmware for the XT1644.
vishnureddy17 said:
I had the exact same issue, and your solution worked perfectly. It's unfortunate how difficult Motorola has made it to find the stock firmware for the XT1644.
Click to expand...
Click to collapse
Which of these 5 download? .

my maxx xt1225 br is hard brick help please!!!

hi guys i'm brasilian and my english is pretty poor but lets try. i was flash 4.4.4 rom br retail. and i update via ota for lollipop.. and brick .. i search in forums here ... and i go it to put in boot loader without robot.. already try many ways to recovery my boot loader but always get error remote failure.. and already used 6.0.1 stock .. maybe i need to files atualy for this? i'm very sad my maxx is dead .. someone give me light .. help me fix this ... thank you guys
Is your bootloader locked or unlocked?
ChazzMatt said:
Is your bootloader locked or unlocked?
Click to expand...
Click to collapse
unlocked
kenedi jr said:
unlocked
Click to expand...
Click to collapse
Good.
What version Android was your phone on before the problem?
Were you on stock (factory) or on custom ROM?
Surely you weren't on Kitkat for almost 3 years?
ChazzMatt said:
Good.
What version Android was your phone on before the problem?
Were you on stock (factory) or on custom ROM?
Surely you weren't on Kitkat for almost 3 years?
Click to expand...
Click to collapse
I was in a custom rom and went to 4.4.4 and tried to upgrade via ota .. and brinck so I was able to make boot loader appear more without the robot
kenedi jr said:
I was in a custom rom and went to 4.4.4 and tried to upgrade via ota .. and brinck so I was able to make boot loader appear more without the robot
Click to expand...
Click to collapse
When you downgrade back to lower stock, you have to omit gpt.bin command. Because you have a newer bootloader.
This is also why you can't take OTA. Because it tries to install a different bootloader (which is probably still older than what you had with custom ROM). If you wanted stock 5.0.2 again, you have to flash full stock image and omit the gpt.bin command.
Are you able to use volume and power button to the bootloader screen?
ChazzMatt said:
When you downgrade back to lower stock, you have to omit gpt.bin command. Because you have a newer bootloader.
This is also why you can't take OTA. Because it tries to install a different bootloader (which is probably still older than what you had with custom ROM). If you wanted stock 5.0.2 again, you have to flash full stock image and omit the gpt.bin command.
Are you able to use volume and power button to the bootloader screen?
Click to expand...
Click to collapse
So I'm stuck on the bootloader. If I connect charger or pc it will already pro boot loader without the robot. I have already tried to pass stock 4.4.4 and 6.0 and more etc always from the failure remote failure in bootloader appears in the log something with gt bin downgrade
ChazzMatt said:
When you downgrade back to lower stock, you have to omit gpt.bin command. Because you have a newer bootloader.
This is also why you can't take OTA. Because it tries to install a different bootloader (which is probably still older than what you had with custom ROM). If you wanted stock 5.0.2 again, you have to flash full stock image and omit the gpt.bin command.
Are you able to use volume and power button to the bootloader screen?
Click to expand...
Click to collapse
My question is if I crashed from 4.4.4 trying to upgrade to 5.1 which version files do I need to adapt to my bootloader that seems to be corrupted?
kenedi jr said:
My question is if I crashed from 4.4.4 trying to upgrade to 5.1 which version files do I need to adapt to my bootloader that seems to be corrupted?
Click to expand...
Click to collapse
Before this trouble, were you ever on stock Marshmallow 6.0.1? If so, you can flash back to full firmware of that, but needs to be the very latest. I'll find a link for you.
Also, do you have TWRP installed and did you have a backup you can restore?
ChazzMatt said:
Before this trouble, were you ever on stock Marshmallow 6.0.1? If so, you can flash back to full firmware of that, but needs to be the very latest. I'll find a link for you.
Also, do you have TWRP installed and did you have a backup you can restore?
Click to expand...
Click to collapse
Yes before this problem I was in the latest 6.0.1 and the stock I have here when I installed had a security update
ChazzMatt said:
Before this trouble, were you ever on stock Marshmallow 6.0.1? If so, you can flash back to full firmware of that, but needs to be the very latest. I'll find a link for you.
Also, do you have TWRP installed and did you have a backup you can restore?
Click to expand...
Click to collapse
I do not have twrp backup and I can not even install the recovery stock
kenedi jr said:
Yes before this problem I was in the latest 6.0.1 and the stock I have here when I installed had a security update
Click to expand...
Click to collapse
OK, then that's the bootloader you were on and will always be on. You need to reflash that latest version (with the security update) to repair. Just reflash the entire full firmware.
There's a link to it here in this forum. I'll find it when I get home, if you don't have it.
Then in the future, if you try to downgrade, you always have to flash full stock version EXCEPT you omit the gpt.bin file. Whether 4.4.4 Kitkat or 5.0.2 Lollipop.
And you can never take OTA.
Because you really have 6.0.1 bootloader.
ChazzMatt said:
OK, then that's the bootloader you were on and will always be on. You need to reflash that version to repair. Just reflash the entire full firmware.
Click to expand...
Click to collapse
This is the most likely because all the methods say so old and not one was and when I try to pass any old stock also will not always get that error in the bootloader in the gptbin downgrade logs
ChazzMatt said:
OK, then that's the bootloader you were on and will always be on. You need to reflash that latest version (with the security update) to repair. Just reflash the entire full firmware.
There's a link to it here in this forum. I'll find it when I get home, if you don't have it.
Then in the future, if you try to downgrade, you always have to flash full stock version EXCEPT you omit the gpt.bin file. Whether 4.4.4 Kitkat or 5.0.2 Lollipop.
And you can never take OTA.
Because you really have 6.0.1 bootloader.
Click to expand...
Click to collapse
thanks bro you saved me
kenedi jr said:
This is the most likely because all the methods say so old and not one was and when I try to pass any old stock also will not always get that error in the bootloader in the gptbin downgrade logs
Click to expand...
Click to collapse
You can not flash any older gpt.bin files. You have to omit (leave out) that flash command.
Your gpt.bin file is 6.0.1, and you cannot downgrade. Even on 4.4.4, trying to accept the 5.0.2 OTA update is still older gpt.bin file in that OTA than your 6.0.1.
ChazzMatt said:
OK, then that's the bootloader you were on and will always be on. You need to reflash that latest version (with the security update) to repair. Just reflash the entire full firmware.
There's a link to it here in this forum. I'll find it when I get home, if you don't have it.
Then in the future, if you try to downgrade, you always have to flash full stock version EXCEPT you omit the gpt.bin file. Whether 4.4.4 Kitkat or 5.0.2 Lollipop.
And you can never take OTA.
Because you really have 6.0.1 bootloader.
Click to expand...
Click to collapse
i don't have link .. i will wanting you so
kenedi jr said:
i don't have link .. i will wanting you so
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?p=72846593
ChazzMatt said:
https://forum.xda-developers.com/showthread.php?p=72846593
Click to expand...
Click to collapse
I was a bit confused with this link which is the last one? I discovered because I am Brazilian and my English was developed only by playing
http://ftpeil.eil.com.br/vip/motoro...S24.107-70.2-7_cid12_subsidy-DEFAULT_CFC.xml/
ChazzMatt said:
http://ftpeil.eil.com.br/vip/motoro...S24.107-70.2-7_cid12_subsidy-DEFAULT_CFC.xml/
Click to expand...
Click to collapse
Face first you're a myth. I just passed gpt.bin and got the bootloader ... I'm very happy. Do I need to pass the entire rom ??
:good::laugh:

Categories

Resources