for the last couple of hrs i been searching around to find the best way to get twrp to flash but i keep getting an error. when i try to go to boot it into recovery i get ERROR MODE. im not sure if my laptop if configured properly because i tried using the CMD method to send the recovery to the the phone but it not working either. any help would be greatly appreciated.
slimjimz81 said:
for the last couple of hrs i been searching around to find the best way to get twrp to flash but i keep getting an error. when i try to go to boot it into recovery i get ERROR MODE. im not sure if my laptop if configured properly because i tried using the CMD method to send the recovery to the the phone but it not working either. any help would be greatly appreciated.
Click to expand...
Click to collapse
What TWRP are you flashing? Try using the TWRP from Elemental ROM thread. It's in the ROM section. Also if you can tell me the command you're using to flash TWRP.
C:\Windows\SysWOW64>fastboot flash recovery C:\Users\User\Desktop\honor6x\twrp-3.2.3-0-berlin.img
target reported max download size of 471859200 bytes
sending 'recovery' (25068 KB)...
OKAY [ 0.689s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.969s
C:\Windows\SysWOW64>fastboot flash recovery C:\Users\User\Desktop\honor6x\RECOVERY-V2.img
target reported max download size of 471859200 bytes
sending 'recovery' (9100 KB)...
OKAY [ 0.471s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.533s
i have tried the multi tool also and the one in Chinese too but im still getting no where
-use the command: fastboot flash recovery_ramdisk twrp-X-X-X
I presumed victory too quick. I tried flashing some 8.0 roms and the stable pie. but it failed I been using the command above but it no longer getting to twrp recovery
Related
So I have an Honor 8 FRD-L04 that I was trying to root today. I flashed TWRP and all was good. Until I tried to install SuperSU using TWRP. It said my data partition wasn't able to be found or something, I can't remember. So I did some quick Googling and tried some fixes (changing the partition format to FAT and back to EXT4, etc). This just screwed it up even more. So here's the scenario:
*Can't access ADB anymore, doesn't show up in devices
*Can access fastboot, however:
I usually get "FAILED (remote: Command not allowed)" when I try to do any commands (bootloader is unlocked). Because of this, I can't flash extracted .IMG files.
*eRecovery tells me "Getting Package Info Failed"
*Don't have access to TWRP anymore
*Have tried multiple firmwares using the dload method, either they can't install or simply do nothing
*I've tried Huawei Multi Tool and got the following output:
Code:
RNV0216B29003646 fastboot
target reported max download size of 471859200 bytes
sending 'boot' (15440 KB)...
OKAY [ 0.332s]
writing 'boot'...
OKAY [ 0.370s]
finished. total time: 0.710s
target reported max download size of 471859200 bytes
sending 'cust' (252389 KB)...
OKAY [ 5.407s]
writing 'cust'...
FAILED (remote: partition error)
finished. total time: 5.418s
target reported max download size of 471859200 bytes
sending 'recovery' (36976 KB)...
OKAY [ 0.791s]
writing 'recovery'...
OKAY [ 0.879s]
finished. total time: 1.675s
target reported max download size of 471859200 bytes
sending sparse 'system' 1/6 (424496 KB)...
OKAY [ 9.894s]
writing 'system' 1/6...
FAILED (remote: sparse flash write failure)
finished. total time: 9.945s
*I've tried using the dload method by first installing the rollback package (which actually installed), and then installing the actual firmware. But of course, the installation of the actual firmware failed.
I've probably tried a few other things, but I'm just so frustrated I can't remember. If anyone can suggest anything else, I'd greatly appreciate it.
This is really bad. The solution to your first problem was to simply remove encryption by formatting data.
Jdelacrix said:
So I have an Honor 8 FRD-L04 that I was trying to root today. I flashed TWRP and all was good. Until I tried to install SuperSU using TWRP. It said my data partition wasn't able to be found or something, I can't remember. So I did some quick Googling and tried some fixes (changing the partition format to FAT and back to EXT4, etc). This just screwed it up even more. So here's the scenario:
*Can't access ADB anymore, doesn't show up in devices
*Can access fastboot, however:
I usually get "FAILED (remote: Command not allowed)" when I try to do any commands (bootloader is unlocked). Because of this, I can't flash extracted .IMG files.
*eRecovery tells me "Getting Package Info Failed"
*Don't have access to TWRP anymore
*Have tried multiple firmwares using the dload method, either they can't install or simply do nothing
*I've tried Huawei Multi Tool and got the following output:
Code:
RNV0216B29003646 fastboot
target reported max download size of 471859200 bytes
sending 'boot' (15440 KB)...
OKAY [ 0.332s]
writing 'boot'...
OKAY [ 0.370s]
finished. total time: 0.710s
target reported max download size of 471859200 bytes
sending 'cust' (252389 KB)...
OKAY [ 5.407s]
writing 'cust'...
FAILED (remote: partition error)
finished. total time: 5.418s
target reported max download size of 471859200 bytes
sending 'recovery' (36976 KB)...
OKAY [ 0.791s]
writing 'recovery'...
OKAY [ 0.879s]
finished. total time: 1.675s
target reported max download size of 471859200 bytes
sending sparse 'system' 1/6 (424496 KB)...
OKAY [ 9.894s]
writing 'system' 1/6...
FAILED (remote: sparse flash write failure)
finished. total time: 9.945s
*I've tried using the dload method by first installing the rollback package (which actually installed), and then installing the actual firmware. But of course, the installation of the actual firmware failed.
I've probably tried a few other things, but I'm just so frustrated I can't remember. If anyone can suggest anything else, I'd greatly appreciate it.
Click to expand...
Click to collapse
I'm going to cover the basis here, as I've seriously screwed over my phone before but recovered.
If you managed to get the phone responsive with the rollback package try flashing the EMUI 4 package.
If that doesn't work, plug into the computer and press and hold the power and volume down buttons to get into fastboot: unlock oem if possible
let me know if that gets you started.
sonicscrewup said:
I'm going to cover the basis here, as I've seriously screwed over my phone before but recovered.
If you managed to get the phone responsive with the rollback package try flashing the EMUI 4 package.
If that doesn't work, plug into the computer and press and hold the power and volume down buttons to get into fastboot: unlock oem if possible
let me know if that gets you started.
Click to expand...
Click to collapse
i was in a similar situation and this method worked! connect the phone to pc in switched off condition, press power+vol down and get into fastboot and then oem unlock, install twrp and tried to installed the zips.. worked and phone booted!!
Hi.
I've been trying to flash twrp my Huawai Mate 8 for a couple of weeks. I keep getting the error I mentioned in the title. The bootloader is unlooked, frp is looked. USB debugging is enabled. OEM is grey.
Android version 7.0, emui version 5.0.1. I've been using the official twrp and used adb files and fastboot from other sources as well as official files. The phone is NOT rooted.
Here is the full message:
fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (22142 KB)...
OKAY [ 0.470s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.477s
I would appreciate any help as this problem has bugged me for so long by now. Thanks!!
I downloaded an OTA and after doing so tried to install twrp and magisk manager, but it would only throw me back into fastboot menu. After trying several different options, such as fastboot flash twrp , the flashing a new boot img etc.
Nothing worked and now i am left with only being able to boot into fastboot menu and i cant access recovery mode either. I;ve tried to flash twrp again but its not working now too.
target reported max download size of 805306368 bytes
sending 'recovery' (98304 KB)...
OKAY [ 2.274s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
I've tried to do fastboot flash recovery but i get the following error:
Can anyone please help me.
Fixed by running a flashall.bat file
Hi guys!
I don't seem to be able to flash TWRP 3.3.1 onto my pie phone. From Linux, I get the following:
Code:
:$ fastboot flash recovery ./recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
target reported max download size of 134217728 bytes
sending 'recovery' (65536 KB)...
OKAY [ 3.554s]
writing 'recovery'...
OKAY [ 0.942s]
finished. total time: 4.496s
The phone doesn't even blink. If I manually reboot it, nothing has happened. If I get to the recovery menu, I get the MI-Recovery 3.0.
What am I doing wrong? How should I be doing it?
Thanks!
To reboot to recovery : vol+ and power twice
I am stuck with the same problem. Is there any way to resize recovery partition? Or could someone send me stock recovery? Thx
EDIT: I managed to fix. Russian TWRP from 4PDA works.
timonoj said:
Hi guys!
I don't seem to be able to flash TWRP 3.3.1 onto my pie phone. From Linux, I get the following:
Code:
:$ fastboot flash recovery ./recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
target reported max download size of 134217728 bytes
sending 'recovery' (65536 KB)...
OKAY [ 3.554s]
writing 'recovery'...
OKAY [ 0.942s]
finished. total time: 4.496s
The phone doesn't even blink. If I manually reboot it, nothing has happened. If I get to the recovery menu, I get the MI-Recovery 3.0.
What am I doing wrong? How should I be doing it?
Thanks!
Click to expand...
Click to collapse
Kindly ensure that you are using the correct device image. If you flash the wrong image/other device image then it will always boot in mi recovery 3.0.
Here is the link : Xiaomi Redmi 6 (twrp.me)
I was able to get the device unlocked successfully, but now I'm in a bootloop.
When I run fastboot, I can try to flash a recovery ROM, but it shows:
PS D:\temp\xiaomi\[email protected]_1> fastboot flash recovery .\recovery.img
target reported max download size of 805306368 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.545s]
writing 'recovery'...
OKAY [ 0.359s]
finished. total time: 1.907s
Click to expand...
Click to collapse
...and then it just keeps bootlooping.
Do I have to flash a specific recovery? Do I need to (somehow) get back to a stock, locked ROM? (I'm unable to download the ROMs from here, so if anyone has hints as to where to get the stock ROMs, I'd appreciate it!)