Database Info

[ROM][JB4.3.1][MTK6589][PORT]CyanogenMod 10.2 for Cubot GT99

This is a port of CM10.2 which was compiled from source by @chrmhoffmann for Wiko Stairway.
This is the lastest build, we can't fix these bugs unless someone tries to compile from source for our device for which I think we don't have sources.
Please Note: Don't ask why X is not working? Can you fix it? I probably can not fix anything, as this is not a source build for our device. It is just a port. If the ported rom gets updated with fixes, I will port again.
This was ported for Cubot gt99. But it can probably be flashed to gt99's clones, Cherry Mobile Apollo and XYZ X1.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
THIS ROM IS NOT MEANT FOR DAILY USE.
Changelog:
-v1.0
Working
- Audio (mic, headphones) - NOT loudspeaker
- most sensors (auto brightness seems to be broken, but sensor works)
- Wifi (not wifi direct)
Buggy
- SIM1 for phone calls (incoming/outgoing) and SMS, data (2g, 3g)
- USB storage. Kind of a workaround for the internal SD: Enter in terminal emulator the following.
Code:
su
setprop persist.sys.usb.config mass_storage,adb
reboot
Not working
- everything else
Click to expand...
Click to collapse
Instructions:
1. Place the zip file in sdcard.
2. Reboot to recovery (CWM/TWRP).
3. Wipe data/factory reset.
4. Wipe dalvik Cache.
5. Install gt99cm102.zip and gapps.
6. Reboot.
Download: Here
Original rom link: Here
Credits:
CM Team
OmniRom Team
XpLoDWilD
drshadow
chrmhoffmann - for the original rom
4shreyas - for his porting guide and his willingness to help

Any solution for Loudspeaker issue?
Thx

[Rom] CyanogenMod 11.0 for Huawei G6 U10

https://postimage.org/
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
1. Download the ROM from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Power )
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
Note: Needed if you are updating from other android version or stock
7. Install CM zip and GApps zip
8. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
How to report bugs :
(I don't have my g6 atm so i can't test builds so i need testers to report the rom bugs)
Enable root access in the developer options
Download this app
https://play.google.com/store/apps/details?id=com.tortel.syslog
Take a logcat and upload the zip for me and explain the bugs u faced
Don't ask for eta !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download
Beta 1
HTML:
http://www.mediafire.com/download/1i6l0e1c9ec1v4k/cm_g6_u10-ota-beta1.zip
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the ROM Source available on Github.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team @vahan @PieroV​
XDA:DevDB Information
[ROM][4.4][UNOFFICIAL][g6_u10] CyanogenMod 11 for Huawei G6 U10 , ROM for the Huawei Ascend G6
Contributors
messi2050
Source Code: https://github.com/messi2050?tab=repositories
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod
Version Information
Status: abandoned
Created 2016-07-08
Last Updated 2016-07-08

/* Current bugs */
- Camera
- Wifi
- Sensors
u tell me

messi2050 said:
https://postimage.org/
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
1. Download the ROM from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Power )
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
Note: Needed if you are updating from other android version or stock
7. Install CM zip and GApps zip
8. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
How to report bugs :
(I don't have my g6 atm so i can't test builds so i need testers to report the rom bugs)
Enable root access in the developer options
Download this app
https://play.google.com/store/apps/details?id=com.tortel.syslog
Take a logcat and upload the zip for me and explain the bugs u faced
Don't ask for eta !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download
Beta 1
HTML:
http://www.mediafire.com/download/1i6l0e1c9ec1v4k/cm_g6_u10-ota-beta1.zip
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the ROM Source available on Github.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
@vahan @PieroV​
XDA:DevDB Information
[ROM][4.4][UNOFFICIAL][g6_u10] CyanogenMod 11 for Huawei G6 U10 , ROM for the Huawei Ascend G6
Contributors
messi2050
Source Code: https://github.com/messi2050?tab=repositories
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-07-08
Last Updated 2016-07-08
Click to expand...
Click to collapse
Can you make the "I Void Warranties" pic a boot animation or full sized wallpaper?
Sent from my Nexus 6P using Tapatalk

Jammol said:
Can you make the "I Void Warranties" pic a boot animation or full sized wallpaper?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
No i can't this is original picture
https://www.google.com.eg/search?q=...AUIBygB&biw=601&bih=962#imgrc=3uTOzUtV0kWIOM:

messi2050 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
1. Download the ROM from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Power )
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
Note: Needed if you are updating from other android version or stock
7. Install CM zip and GApps zip
8. Reboot to system
Enjoy!​
Click to expand...
Click to collapse
Hi, sry I'm noob in android system, I can do this on a Huawei Ascend Y530? and where I can download GAPPS? and after i do the reset how do I install those two zip files?​

messi2050 said:
/* Current bugs */
- Camera
- Wifi
- Sensors
u tell me
Click to expand...
Click to collapse
Any of these fixed?

StagOS Android 11 [Official] [Raphael]

StagOS [Official] [Raphael]
is a custom-ROM based on AOSP that aims to provide a minimalist experience with useful features for customization.
This is a Los-Fod, Miui Vendor based build
Updates and changelogs
Download
FLASH INSTRUCTIONS
Please familiarize yourself with flashing and custom rom use before attempting to flash the from.
1) Backup Everything (Most Important)
2) Download ROM, Latest vendor, , G-Apps , Magisk Debug,dfe if you are encrypted
3) Reboot to a Recovery (TWRP,Ofox...)
4) Wipe System, Data, Cache, Dalvik Cache.
5) Flash - Vendor,ROM, G-Apps, Magisk Debug, dfe if you are encrypted
6) Once done, wipe cache.
7) Reboot to System.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Sources
ROM Source: Stag-OS Sources
Device Source: Raphael
Kernel Source: Perf+ Kernel
Perf + Kernel is prebuilt
Created 2020-10-11
Last Updated 2020-10-11
Status : OFFICIAL
By @IronGFLy

reserved

Hey, what is Magisk debug?

Screenshots please

Coolness3579 said:
Hey, what is Magisk debug?
Click to expand...
Click to collapse
https://drive.google.com/file/d/1X8bd2iFUn5dN63EKDLXHVLmsdcxh0lB2/view?usp=sharing

Thalaivaa said:
Screenshots please
Click to expand...
Click to collapse
Big source update coming soon, after that

[A11][R][ARM64][A40]Project Fluid 1.6 UNOFFICIAL - VANILLA

*/ Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
!!!Read the entire OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!!!
Fluid is an aftermarket Android custom ROM distribution based on AOSP, focused on bringing a better UI/UX to Android with a fluid Experience coupled with Themes and Customisations.
#FeelsFluid
FLUID doesn't aim at providing all the Customisation Available on the Planet. We are Focused on a Cleaner, more Material Design approach, with a few Twists that assured. We do have a dedicated Theme Engine with cool Stuff getting added every new Update. So Sit back and Enjoy FLUID on your Device!
Spoiler
- Adaptive Playback
- Vanilla
- Double tap power button for Camera
- Redesigned Themes page
- Statusbar/QS/Lockscreen Customisation
- Several System Themes, Icon Shapes and Fonts
- A redefined UI
- ... try it out!
Spoiler: HIT ME FAST! :D
DOWNLOAD
VENDOR : https://drive.google.com/file/d/1pnBosIAueDsyTyYf9ntm6w2b0p1jlLAb/view?usp=sharing
Wanna experience FLUID on your phone? DO IT!
Spoiler
- Download the ROM
- Backup every Partition from TWRP/OFOX Recovery
- Make a full Wipe (System, Data, Cache & Dalvik)
- Flash the ROM.ZIP
- Install GAPPS Package (BitGapps, NikGapps, FlameGapps)
- ...and Reboot!
[First Boot will take a few Minutes! Have Patience]
Guide for Noobs if you cannot Boot! TESTET AND CONFIRMED!(if you didn't know what are you do, do nothing and stay on Stock ROM!
if you have already UNLOCKED BL + TWRP/OFOX, SKIP STEP 1-5:
- Unlock your BOOTLOADER
- Install TWRP/OFOX
- Flash DM-Verity
- Wipe DATA/CACHE
- Reboot to System
- Download ALT+F4 Vendor (link unter > "here in every Thread - Downloads" + Your ROM!
- Go to TWRP/OFOX, wipe > VENDOR/VENDOR_IMAGE (BACKUP EVERYTHING EXCEPT DATA)
- Flash vendor_altF4.zip.
- Reboot Recovery (not System!)
- Flash <YOUR_ROM.ZIP>
- Reboot SYSTEM
- wait for BOOT, if sometimes gives one Reboot it is normal!
...Clean Flash is always recommended!!!!
2021-04-23
* Initial Build for A40
2021-05-09
* FIX BOOT
* May security release
* Update from version 1.4 > 1.5
* switch to Pixel Power HAL
* Bug fixes
​
BUGS? Give Logcats, wrote it here or in our A40 or Here. You can helping us or you are helping yourself too.
-> How to take Logcats?
XDA - LOGCAT & XDA - Second LOGCAT
​
SOURCE
Source Code: Project-FLUID-GitHub
Kernel Source: kernel
Device Source: device
Telegram:
Samsung Galaxy A40 Group: SGA40
People behind this ROM!
################
@ender1324
@AndroBuddy
@SebaUbuntu
@painkiller3
@AmulyaX
XDA DevDB Information
Project Fluid, ROM for the Samsung Galaxy A40/ALL VARIANTS
Contributors
@kevios12, @SamarV-121 for Device/kernel/vendor Tree bring up, @Haridhayal for add fix hardware.
Project FLUID
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware: OneUI2.0/ALT+F4 ROM
Version Information
Status: Stable / UNOFFICAL
Created: 2021-04-23
Last Update: xxxx-xx-xx​

Nice

# Update
--------------
> Changelog: 2021-04-23
* Initial Build for A40
> Changelog: 2021-05-09
* FIX BOOT
* May security release
* Update from version 1.4 > 1.5
* switch to Pixel Power HAL
* Bug fixes

Changelog 2021-06-10
* Update to FLUID 1.6
* June Security Patch
* Fix Adaptive Brightness
* improve System Performance
* Device overlay fixes
* System improvments
* Fluid internal fixes

[ROM][UNOFFICIAL][11.0][X00P] REVENGE OS v4.1 [2022/06/30]]

RevengeOS is an operating system based on Android Open Source Project, built with a unique look and performance in mind. It's daily usage ready, lightweight, and elegant.​FEATURES:
- Battery health checker
- Brand new RevengeUI, built to be different, built to be elegant
- Brand new media controller
- Systemwide gradients
- New lock screen clock styles
- Incall haptic-feedback
- Kill app button
- Toggle battery percentage in the status bar
- Resume media from Quick Settings
- Playback control from volume buttons
- Wake up with volume buttons
- Quick camera launch from sleep
- 3-button navigation system
- Pill navigation system
- Swipe to screenshot
- Wake on charge
- Proximity sensor check when waking up
- Systemwide sensor block
- And so much more!
INSTRUCTIONS:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Before installing ROM Zip make sure to flash latest pie firmware WW-16.00.1906.411
If not then download & flash latest pie beta first from here FIRMWARE-ASUS_X00P-WW-16.00.1906.411-user.zip.
INSTALLATION:
Download & Place ROM & Gapps in your internal storage/virtual SD
Boot into TWRP
Wipe System, Vendor, Data, Dalvik, Cache.
Flash the ROM and GApps.
Reboot and Enjoy.
DOWNLOADS:
ROM: Click Here to Download ROM
Gapps : https://opengapps.org/ (ARM64 11.0 Pico Recommended)
BUGS: Screen Cast not working
Grab a logcat right after the problem has occurred (please include at least a few pages of the log, not just the last few lines, unless you know what you're doing). Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
XDAevDB Information
REVENGE OS, ROM for the Asus ZenFone Max M1
Contributors
@RazaDroid by tree
@Vhmit by compilation and modifications
@iamsaalim by kernel
Source Code: https://github.com/BlissRoms/platform_manifest/tree/r
Device Tree: https://github.com/mitoaprendiz/device_asus_X00P
Vendor Tree: https://github.com/mitoaprendiz/vendor_asus_X00P
Kernel Tree: https://github.com/asus-msm8937-devs/android_kernel_asus_msm8937
ROM OS Version: Android 11
ROM Kernel: Linux 3.x
ROM Firmware Required: Pie firmware.
SELinux: Enforcing
Version Information
Status: Stable
Current Stable Version: v4.1
Stable Release Date: 2022-06-30
SCREENSHOTS: