Hi friends
After update my px3 mtce to malaysk 7.1.2 my navi dont see 3G dongle
3G settings are grey. I dont have signal icon.
First dongle is qualcomm hsdpa 7.2Mb
Second dongle is huawei e3131
The same problem. I dont see in unit.
Related
I updated the MSU and Seicane sent me a new system update. MCU is MTCE-2.65. After updating was complete i had lost my Bluetooth. WIFI works normal and all buttons around the HU is working normal Bluetooth is missing the device name and pass code that was there when it came stock. wont find my phone or odb2 adapter. I was wondering if there is a posiblity that it some how changed the Bluetooth settings?
Did you find a fix?
Hello Cody,
Did you get any feedback on this?
I've got the same problem on a MTCD GS unit, unresolved!
Richard.
Hello guys, I have an Xtrons Andrdoid 5.1.1 MTCD RK3188 head unit and I bought for it a nice Vgate iCarPro WiFi OBD2 Adapter, which, for it to work and communicate with the head unit, it has to be connected with the WiFi network of my head unit, but then, if it is connected the whole time with the head unit, then I can't use my head unit anymore to surf the internet, to use spotify, etc etc because now it is connected to the OBD adapter through the WiFi, and I can't connect it neither to my phone's hotspot network nor to the small mobile data (SIM card) router that I also use as a hotspot to have internet in my car, because I would basically have to be able to connect to 2 WiFi networks with my head unit which, as far as I know, isn't quite possible, any solutions for this would be appreciated. Thanks.
Anyone got a solution guys? If I can't find any alternative I'll send the OBD adapter back and buy a Bluetooth one.
Did you find any solution? I do have the same problem. Maybe switch to a bluetooth device?
Any suggestion?
I have Px5 MTCE headunit from Klyde.
Thanks everyone.
almost same question as above. PX5 MTCE Dasaita 10.2 with ISDB -T, the factory tv tuner but not working in my area. i am swapping it with another tuner (working) with the automotive multi pin connector for the power, composite video signal and the UART tx/rx signals. anyone knows the "nuts and bolts" for the protocol?
tagar said:
almost same question as above. PX5 MTCE Dasaita 10.2 with ISDB -T, the factory tv tuner but not working in my area. i am swapping it with another tuner (working) with the automotive multi pin connector for the power, composite video signal and the UART tx/rx signals. anyone knows the "nuts and bolts" for the protocol?
Click to expand...
Click to collapse
What's your Country's DTV standard?
Your factory TV Tuner is built-in or external? Thanks.
tribalfs said:
What's your Country's DTV standard?
Your factory TV Tuner is built-in or external? Thanks.
Click to expand...
Click to collapse
it is ISDB-T for south america, japan, philipines etc. the dasaita tv tuner (external) is for japan market with mini B CAS which i think is the reason it will not pick up the signal. i purchased another tuner that works ( same standard ) and i can tap to the composite video signals for signal display without problem. however, the HU commands to scan/change channels of course does not work even with correct tx/rx pairing of the wires between HU and tuner. someone here had hacked this before?
https://s.click.aliexpress.com/e/c2UwNoZi
Will this work (touchscreen control) with my Klyde PX5 MTCE headunit?
Can't find Klyde branded one.
Any idea? Thanks
tribalfs said:
https://s.click.aliexpress.com/e/c2UwNoZi
Will this work (touchscreen control) with my Klyde PX5 MTCE headunit?
Can't find Klyde branded one.
Any idea? Thanks
Click to expand...
Click to collapse
Don't think they make their own. Most if not all hu manufacturers buy from the vendors and slap on their company logos
Sent from my Pixel 3 using Tapatalk
SilentO said:
Don't think they make their own. Most if not all hu manufacturers buy from the vendors and slap on their company logos
Sent from my Pixel 3 using Tapatalk
Click to expand...
Click to collapse
So will it work or not?
Hello, I'm Paul and i'm new here. nice to meet you
I got problems with my HU: imgur dot com/a/VNcWdU2
It's a HU for Ford Focus MK2(oval one without MINIUSB on bottom left)
Android 8.0
Cortex A53 OCTACORE 8threads
RAM 4 GB DDR
ROM 32 GB
Don't know what else we need to figure out my problem
I got some questions/problems:
1)What is producer/name of HU or how to check it?
2)How can i update it to newer android or any good ROM with everything working? I don't like this bar on left side, and there is no menu with all apps like on phone, all installed apps actually goes to desktop...
3)How can i actually make a hard reset? I can't reset to default anything from submenu FACTORY SETTINGS, and using 'wipe data/factory reset' through 'recovery'/'device informations' only resets main dekstop(all setting remains the same...)
4)When i'm trying to 'reset to factory settings' i'm getting stuck with wifi not able to turn ON(sometimes) and also my 3g modem(MF821) is not working like it should(it shows the signal icon but it's stays empty and there is info 'no service' 90% times, sometimes it works after hard reset, but then wifi is not working and so on). 3G modem actually started to crash maybe week ago, when i need to put it out of usb then back to work, that's why i tried wipe data. It doesn't help, but mees much more
I got it from Allegro(Polish auctions), the seller won't tell me anything
Searched AliExpress and found a radio looking same from front/back like mine, only difference is the UI
Ow Tosin
IPS Android 8.0 Octa Core Car DVD For Ford Focus S C MAX Galaxy Mondeo Galaxy Kuga Focus 2007 2008 2009 2010 2011 Car Radio GPS
XINPINHANG
PX5 Android 8.0 IPS screen for FORD Mondeo Focus S-Max C-Max Galaxy CAR DVD 4GB RAM+32GB FLASH 8 Octa Core+DVR/WIFI+DAB+OBD GPS
HIFIF
8 Core 2 Din 7''Android 8.0 Car DVD Player For Ford Mondeo/Focus GPS Navigation Bluetooth Car Stereo FM Rds Radio Wifi Headunit
Thats the models i found looking same like my HU. But how to check correctly what i got?
Thanks for help. Looking forward to replies
ok, when i logged into my main google account, it tells me(on website>devices) ROCHCHIP PX5
Is this a model?
Hello there.
I’m new to android head units.
I have just bought and install on my Citroen C5 X7 Tourer (2013) a Joying SKU JY-UQS15N4G-DA with canbus harness adaptator.
Everything is fine except 2 or 3 things:
-My mobile connection is very strange (from the sim card I inserted in the head unit) and the way my apps deals with it.
When I have 4g some app will consider themselves offline and some other apps are working fine and some other apps will only work with H+ network.
-My connection keeps on randomly changing from 4g to 3g to h+ to E without my car moving. I’ve try to change my apn settings in many ways with no success, maybe not the right changes..
-I have no bips from the original radar system of my car but the speaker from joying works. All the other function works great, rear cam, steering wheel command etc.
Do anybody have the same problems or know how to solve it?
Thanks in advance and I’ll be glad to give more informations or screenshots if needed.
PS : I’ll make a video of issue.
Hello, I’m in touch with the joying support and will let you know if something is found.