Database Info

[KERNEL][STABLE] Badass Kernel 1.9.2

Hey guys. This is Badass Kernel, a modified version of AU Kernel with a little bit too many additions to fit in the Original Development section.
Logs are disabled in this kernel. This is not a bug, it's a feature.
Compatibility:
Android 4.2.2
CM10.1
AOSPA
PAC
AOKP
Android 4.0.4/4.1.2
CM9
CM9.2
AOSP
Touchwiz ICS V5
So.. new stuff:
1.0
CPU Undervolt down to (0-1-2-4-6).
A_U's bootsplash
Added Badass CPU Governor
Added Badass GPU control
Replace ZRAM LZO compression with Google Snappy compression which is a lot faster
Kernel Samepage Merging enabled by default
Writeback tweaked to do the work only when the screen is off
Added ROW I/O scheduler
Tweaked smartassV2 for more battery saving
Tweaked CFQ and Deadline
1.1
Added frandom support for CrossBreeder to finally work properly
Fixed memory leak in android binder
Restored and updated Lazy CPU Governor (expected: smooth UI, much better battery life and some lag in the first 20-30 seconds after boot)
Filesystem tweaks
Memory tweaks
Added SFB net scheduler and Veno TCP congestion algorithm for better use of internet
Disabled a lot of debugging
1.2
Implemented Dynamic Filesync and enabled by default
Proportional Rate Reduction for TCP
Correct AXI bus values for CPU
Re-added 825 and 844 MHz frequencies (be careful with these as they're not stable, they were left out with a reason)
Trimming /cache every 15 minutes if media playback is stopped.
Updated LowMemoryKiller driver (if you use ram manager or scripts for setting minfree, here are some really good values:3072,4096,12800,14336,15360,19200)
New bootsplash (HTC-alike)
1.2.1
Fixed Snappy
Further UV (0-1-2-3-6)
1.2.2
Enabled Compaction and linked it to LowMemoryKiller
Updated Deadline(now it's better than ROW)
Changed kernel compressor/decompressor from GZIP to the much faster LZ4.
Writeback tweaks from Linus Torvalds
Added TCP congestion algorithms: Hybla, Westwood, Highspeed-TCP. Default is Hybla because in tests, performed better than the rest.
1.3
Enabled Triple Buffering (component of Project Butter by Google)
Added Tiny RCU for smaller memory footprint
Added BoostPulse interface for SmartassV2
1.3.1
Added BoostPulse interface for SmartassH3 and updated it with a new variable(boost_freq) to suit the governors ramping policy
1.4
Lots of code optimizations
AHB Overclocking for faster R/W operations[787 MHz and higher don't have this kind of overclocking because of instability)
New 652 MHz undervolted frequency
CPU Unaligned Access (much faster booting time because of better kernel decompression)
Buffer values updated from Samsung original sources(Triple Buffering, Camera)
SmartassH3 and KSM parameters tweaked for better battery life
1.5
CPU clocks rework
Modified AXI Bus to allow lower CPU frequencies
Added completely stable 68 MHz frequency
New undervolt settings (0-0-1-2-3-5-6-7)
Rewritten Badass CPU and GPU control driver to make more use of 68 MHz frequency
Tuned SmartassH3 to make more use of low frequencies
Added fully functional zCache and ZsmAlloc, backported from 3.4 kernel
1.5.1
Added LowBattery Powersave feature for Badass governor
Badass parameters are more performance biased now
Recalculated Frame Buffer Size for Triple Buffering
Clean-up(remove deprecated CPU governors)
1.6
Add newest Adaptive RED Net Scheduler from 3.4 kernel and make it default.
Replace Snappy Compression with LZ4 Compressor(this is the fastest compressor on the market)
Make our kernel probably the first 2.6 kernel to have these two features
1.6.1
Update LZ4 Compressor from original sources and make it fully functionable
1.7
Replace zRam XvmAlloc with the better ZsmAlloc integration
Update zRam from 3.0 drivers
Make zRam LZ4 decompressor work faster in the same CPU cycles
1.8
Add SIOPlus scheduler (finally something equal or better than deadline)
Add CPU Idle driver to support C4 Deeper Sleep state
Add Wheatley governor to make more use of the new C4 state.
Change Bootsplash
1.9
New governor: WheatleyPlus
Reworked scaling down logic for less calculation
Added BoostPulse interface
Linked BoostPulse to the touchscreen driver (now the governor can really "sense" a touch and boost the frequency after a specific time threshold)
Added Triphasic scaling up logic from Badass (Phase2 is 360 MHz and Phase3 is 480 MHz)
Fixed the Deep Sleep states verification for scaling
Added GPU Control Driver
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Updated OnDemand governor (it's pretty good at the moment)
Remove Badass and Lazy as they were deprecated
Link BoostPulse to the touchscreen driver for SmartassH3 and OnDemand
Optimize the CPU clock structure for WheatleyPlus
Update SIOPlus and add fluid tunables
Introduce Dynamic Cache Pressure
Revise Dynamic Writeback algorithm
Introduce Timer Slack Controller (aka Timer Coalescing, explanation below)
Deep Sleep tweaks
Backport OOM Killing algorithm from 3.8 kernel
Backport LowMemoryKiller and Timed GPIO drivers from 3.8 kernel
Add Whitelist feature to LowMemoryKiller (you can write PIDs of the processes you want to whitelist, in this file > /sys/module/lowmemorykiller/parameters/w_list ~ below you'll find the script for doing this at boot)
Android Binder update
CFS kernel scheduler optimizations
GPU driver optimizations and code cleanup
Make sure that the GPU turns off when the screen is off
Make the sleep states transitions faster
1.9.1
Finetune WheatleyPlus for better responsiveness
Optimize WheatleyPlus for overclocking on 652 MHz and 768 MHz
Fixed graphical glitches(hopefully)
1.9.2
Every bug fixed
Removed WheatleyPlus
Updated Interactive governor to the latest version from 3.8 sources
Add Dynamic Interactive governor (98% the same as Interactive, but it dynamically changes its parameters according to the load)
Dynamic PLL Overclock
Further undervolt until 768 MHz (the latter allows us to do this without losing performance)
Predefine minfree and adj values
Fully functional App Whitelist (example script here)
Forced unaligned access
Fast Charge (use this to enable it: FastCharge.apk - 1.29 MB) [Disconnect USB Cable - Turn ON - Connect USB Cable]
Timer Slack Controller: (this is a copy-paste from boype's thread)
What does the timer slack feature do?
Timer slacking aims to synchronize applications' and processes' CPU requests. The goal is to wake up the CPU less often in oder to save battery. What you need to know here is the following: waking the CPU up and putting it back to sleep again consumes power. Imagine that four apps wake the CPU up four times each in one second. While without timer slacking the CPU would be woken up 16 times, it is desirable to coordinate the wakeups. If done right, the CPU would wake up less often, effectively allowing power savings and longer sleep periods. This is what timer slacking does.
I have activated timer slacking only for background applications, so that everything else stays as responsive as you know it.
Apple has recently introduced this feature under the name 'timer coalescing' with their Mac OSX Maverick (link).
More information: How Apple does timer slacking ('Timer coalescing') (Scroll a little down to the diagrams)
LZ4 Compressor:
LZ4 is a very fast compressor, based on well-known
LZ77 (Lempel-Ziv) algorithm. Originally a fork from LZP2, it provides
better compression ratio for text files and reaches impressive decompression
speed, in the range and beyond 1GB/s per core (!), especially for binary files.
These speeds are scalable with multi-threading modes, quickly reaching
RAM speed limits on multi-core systems.
ROW I/O scheduler:
The ROW scheduling algorithm will be used in mobile devices as default
block layer IO scheduling algorithm. ROW stands for "READ Over WRITE" which
is the main requests dispatch policy of this algorithm.
The ROW IO scheduler was developed with the mobile devices needs in mind.
In mobile devices we favor user experience upon everything else, thus we want
to give READ IO requests as much priority as possible. The main idea of the ROW
scheduling policy is just that: - If there are READ requests in pipe - dispatch them,
while write starvation is considered.
Download:
AOKP/AOSP ICS:BadassKernel-AICS.zip - 4.78 MB
AOKP:BadassKernel-AOKP.zip - 4.79 MB
CyanogenMod 9.2BadassKernel-ICS.zip - 4.76 MB
AOSPA:BadassKernel-PA.zip - 4.79 MB
CyanogenMod 10:BadassKernel-CM10.zip - 7.03 MB
CyanogenMod 10.1:BadassKernel-JB.zip - 4.79 MB
Various tweaks
Script for adding apps to LowMemoryKiller's whitelist:Whitelist
(you have to edit it to add your own apps, then move it to init.d and set correct permissions. right now you can only add one app, I'll fix this in the next version)
Script to enable zRam with optimized disksize for Fit: View attachment zRamV2.zip (flashable zip) [UPDATED]
Jeeko's PureAudio fixed for CM10.1 and AOKP: View attachment PureAudio__1.0_-_STUDIO.zip [ Please thank Jeeko for this awesome mod. ]
NOTE: This version of PureAudio is compatible with absolutely any equalizer or player.
If you have Titanium Backup installed, in the menu you'll find an option named "Integrate sys Dalvik into ROM". Use it.
This is something like odexing your system, but keeps the classes.dex files inside the apps. Don't worry if you don't have a lot of system space, Titanium will odex as much as it can until the free space runs out.
TIP: So in latest version of CrossBreeder, the OP added some system tweaking which interferes with our kernel. So I edited those parts to match our settings and device limits.
If anyone wants to install CrossBreeder:
-First uninstall by flashing this file: CrossBreeder_Uninstall_7.2.13.zip - 943.12 KB
-Then install this custom version: CrossBreeder_7.2.13-Badass.zip - 1.59 MB
Sources:
GitHub
Credits:
A_U for compiling the base kernel
franco for the various tweaks I cherry-picked from his source
androidarmv6 for fixing bluetooth
Ezekeel for his Wheatley governor

How to install the kernel?

Subdin said:
How to install the kernel?
Click to expand...
Click to collapse
Flash the zip.....
Sent from my GT-S5670 using xda premium

droider007 said:
Flash the zip.....
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
to install cm(9,10,10.1)
and just flash the kernel??????

CM 10.1 kernel isn't a zip...

NM99 said:
CM 10.1 kernel isn't a zip...
Click to expand...
Click to collapse
rename it to .zip
---------- Post added at 11:50 PM ---------- Previous post was at 11:49 PM ----------
droider007 said:
rename it to .zip
Click to expand...
Click to collapse
but don't try its not booting.......wait for a fix....:good:

I'll wait for the fix.

NM99 said:
I'll wait for the fix.
Click to expand...
Click to collapse
Changed the ramdisk, now it should boot. All versions are flashable zips, you don't have to reinstall the ROM for installing a kernel.
Keep a flashable zip with your original kernel on sd in case this doesn't boot.

I flashed kernel for CM10.1 RC6 of erikcas and it works without problems for me.

ZmisiS said:
I flashed kernel for CM10.1 RC6 of erikcas and it works without problems for me.
Click to expand...
Click to collapse
Alright, good to hear that.
Thanks for reporting. This means that the other versions will work too.

alin.p said:
Changed the ramdisk, now it should boot. All versions are flashable zips, you don't have to reinstall the ROM for installing a kernel.
Keep a flashable zip with your original kernel on sd in case this doesn't boot.
Click to expand...
Click to collapse
I'll be sure to flash it soon.
Just a question, I flashed the tweaks on this thread and Fly-On Scripts.. After flashing the kernel, do I need to flash them again?
---------- Post added at 06:33 PM ---------- Previous post was at 05:34 PM ----------
Just a little update, just flashed the kernel. No problems at all, it feels smooth as it can be. I'm running it 68-768Mhz with no problems.

Wake up in the morning..
Open xda (5670 forum)..
see something new anddd..
ohmyglob! FINALLY! SIR ALIN.P's KERNEL!
Best morning news and goodness in the morning! ooohh yeah! Time to test this baby out! By the way, I'd love to see your ROM here sir Alin! THANKYOU!

Kernel works perfectly at 768Mhz, something that I couldn't OC to before. I tryed to OC to 806Mhz and my Fit rebooted automatically. :lol:
Now I'm trying to use 787Mhz to see what can happen.
EDIT: Can't OC over 768Mhz. At 787 the G-Fit keeps running for 15 mins until it locks at whatever it's doing for forever and from 806 onwards it just reboots automtically. At least that's what my G-Fit does, don't know what about the others. Just sharing my personal experience so far with the Badass Kernel.

NM99 said:
I'll be sure to flash it soon.
Just a question, I flashed the tweaks on this thread and Fly-On Scripts.. After flashing the kernel, do I need to flash them again?
---------- Post added at 06:33 PM ---------- Previous post was at 05:34 PM ----------
Just a little update, just flashed the kernel. No problems at all, it feels smooth as it can be. I'm running it 68-768Mhz with no problems.
Click to expand...
Click to collapse
The kernel installs in its own partitions, it doesn't mess with the /system or /data. So you don't need to reinstall anything, only the kernel will be modified when flashing.
About the OC, the kernel uses the same clocks as the stock kernel, with a little tweaks for stability and battery life(Undervolt and refined AXI bus). I was expecting 768 to be the maximum, that's a physical limit. I can't do anything about it. Anyway, I added 748 MHz in case 768 is unstable for some of you.
Jhayzt said:
Wake up in the morning..
Open xda (5670 forum)..
see something new anddd..
ohmyglob! FINALLY! SIR ALIN.P's KERNEL!
Best morning news and goodness in the morning! ooohh yeah! Time to test this baby out! By the way, I'd love to see your ROM here sir Alin! THANKYOU!
Click to expand...
Click to collapse
Thank you too!
I just ported my ROM too. The no-gapps might still have some problems, not sure about it. I had only two reports and 30 downloads, maybe the errors are /data related and individual.
I'll be away for two weeks to prepare for my exams, so I'll answer your questions then.

alin.p said:
The kernel installs in its own partitions, it doesn't mess with the /system or /data. So you don't need to reinstall anything, only the kernel will be modified when flashing.
About the OC, the kernel uses the same clocks as the stock kernel, with a little tweaks for stability and battery life(Undervolt and refined AXI bus). I was expecting 768 to be the maximum, that's a physical limit. I can't do anything about it. Anyway, I added 748 MHz in case 768 is unstable for some of you.
Thank you too!
I just ported my ROM too. The no-gapps might still have some problems, not sure about it. I had only two reports and 30 downloads, maybe the errors are /data related and individual.
I'll be away for two weeks to prepare for my exams, so I'll answer your questions then.
Click to expand...
Click to collapse
For 768 MHz which governor, minimum and maximum CPU frequency?

camera!
video camera dont work on cm9!
with this kernel!

[/url][/IMG]On CM10.1 RC6 of erikcas all works except Skype.
Please answer the question: For 768 MHz which governor and minimum CPU frequency?

ZmisiS said:
On CM10.1 RC6 of erikcas all works except Skype.
Please answer the question: For 768 MHz which governor and minimum CPU frequency?
Click to expand...
Click to collapse
Governor....smartassH3 or badass
Min freq......122 or 68.....
Sent from my GT-S5670 using xda premium

alin.p said:
Alright, good to hear that.
Thanks for reporting. This means that the other versions will work too.
Click to expand...
Click to collapse
Thanks for such a speedy update... :good:

Hey guys, a new version of Crossbreeder has been released.. Can I install it or it can give problems with the kernel?

[KERNEL] [DISCONTINUED] [06/15/14] AURORA R11v2

Aurora Kernel - N900xxx TW
This kernel is intended for battery-saving with keeping maximal possible performance
based newest NE6 sources
Linux 3.4.93 Update
Optimized Cortex-A15 4.10 LINARO Toolchain
see Features for details
​
Features:
- based on newest NE6 sources
- Linux upstream patches to 3.4.93
- SELINUX permissive
- Synapse support
- init.d support
- OC up to 2.8GHZ
- GPU OC from Snapdragon 801 (up to 587MHz)
- complete dts based kernels Voltage control by faux123
- IntelliPlug driver (for mpdecision replacement) by faux123
- IntelliThermal control driver (better than stock thermal control) by faux123
- Hardlimit CPU control interface by yank555:
- TouchWake by yank555
- PowerSuspend driver by yank555 with default set to hybrid-mode (autosleep and panel hook)
- FauxSound
- UKSM
- FastCharge Support
- LED Control
- mdnie Control by wootever
- Many governors: nightmare, dancedance, intelliactive, intellidemand, uberdemand, wheatley, smartmax, smartmax_eps, lionheart, pegasusq, darkness, hyper, badass, abyssplugv2, adaptive, conservative, ondemand, userpsace, powersave, interactive, performance
- More schedulers: noop, deadline, row, cfg, bfq, fiops, sio, zen
- enabled all TCP congestion controls: veno, westwood, cubic, reno, bic, highspeed, hybla, htcp, vegas, scalable, lp, yeah, illinois
- TCP congestion control default to veno
- new ARMv7 l2 cache
- Filesystem support: Ext2, Ext3, Ext4, FAT32, NTFS, USB OTG, exFAT with many fixes and optimizations (AIO, etc...)
- added multiple compression support for example LZ4, many patches
- F2FS support
- faster glibc
- frandom
- faster crypto libs
- Kernel XZ
- Ramdisk LZ4
- many fixes, updates, patches and enhancements from many sources
- many I already forgot
Check Synapse and thread to know all features
Changelog:
this post
Synapse profiles:
this post
DOWNLOADS
Direct downloads, look at my hosting:
mojosmirror.com
Downloads @ dev-host
​
Source: Github
Credits and many thanks to:
Much thanks to faux123 and yank555 for their great kernel
thanks to wootever for having always nice and useful commits
thanks to Imoseyon for having always nice and useful commits, too
thanks to civato for helping me starting here with studying his code
thanks to Myfluxi, labodj and Cl3Kener for commits
thanks to UpInTheAir for all his work with his Synapse interface
thanks to GuneetAtwal for some single picks
thanks to franciscofranco, zamcum, ZaneZam, CM-team, Codeaurora, ... and everyone else I forgot!
PM me, if you find your work not mentioned here
XDA:DevDB Information
Aurora Kernel Note 3, Kernel for the Samsung Galaxy Note 3
Contributors
MojoManagement
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R11v2
Stable Release Date: 2014-06-15
Created 2014-05-09
Last Updated 2014-08-29

Reserved

Reserved

Changelog
R11 (aka Synapse release)
NOTICE:
Due to heave Synapse changes again, I recommend to clear Synapse data, before you flash
If you feel unsnappy, raise Touchboost values, completely set both down to 300MHz at init
Synapse settings added & reworked (spent whole day into Synapse primarily)
Synapse can now make a flashable zip from your backup profile to share with others (look under tab Synapse)
Removed some sound pre-settings and removed FauxSound control for now to prevent still unknown issues
a few more fixes
R10 (beta)
NOTICE:
I recommend to clear Synapse data!!!
Synapse should now have enough options for daily settings
So please dont mix apps for setting kernel features
Synapse settings added (very hard work.....half day wasted here...)
S-Browser crash fixed on S5 ports
Sound issues fixed and quality should be improved
completely switched to UKSM now
a few more fixes and patches from different sources again
PS:
Please dont complain about voltage control in Synapse
If you want to experiment with voltages, you can set them one by one yourself
R9 (beta)
NOTICE: this will break some of Faux Control App functions, especially frequency setting, until Faux updates
If you dont want to run a beta, stick with R8 until stable release
There is currently not voltage, thermal, screen, zswap control in Synapse!
update to Linux 3.4.92
Synapse is back (but not everything is implemented), check yourself, big thanks to UpInTheAir, which made a very detailed Synapse layout, which I used as base
Hardlimit Interface update to 2.0a, you can now set screen on and screen off max/min frequencies separately, wakeup kicks, touchboosts, DVFS lock... check Synapse
GPU OC with Snapdragon 801 values (up to 587MHz)
Ramdisk is now LZ4 compressed (need to check kernel for LZ4, too)
Led Control updated to V1.2
IntelliPlug updated to newest version
Logger can be enabled/disabled through sysfs interface
many fixes and patches from different sources again
R8
finally working NE6 base with all known features
R7
updates base to NE6
same as R6
R6
switched to faux123-yank555 kernel as new base
over 300 commits added, patches, fixes, enhancements, etc...
see features
r5
lower power frequency 268,8MHz should work now as expected
lowered voltage for 268,8MHz (its really low, report if unstable)
new govs: lagfree and smartassv2, both tuned
updated and optimized fiops scheduler (which I recommend for internal)
optimized BFQ scheduler (which I recommend for external...)
linux update to 3.4.91
CIFS support (experimental)
enabled ksm (experimental)
swap support
updated toolchain to Linaro 4.9.1 05/2014
LZ4/LZO updates
some sound patches
many arm patches
some memory patches
more I forgot ...
r4
more fixes and enhancements
more govs: intelliactive, abyssplugv2, conservativex, adaptive
Dynamic FSYNC is back
permanent async FSYNC from HTC
PowerSuspend updates: hooked to AutoSleep and Panel, first sleep hook wins
experimental low power frequence
zen scheduler added
few more things
r3
over 60 fixes, patches and enhancements since r2
LZ4
crypto optimizations
faster glibc
very fast random generation (10-50 times faster)
gpu patches
linux update
many more
r2
over 50 fixes, patches and enhancements at all from beta
support for N900T
updated busybox (problems fixed)
updated ramdisk
mpdecision improved (also recommend Intelli Hotplug)
more compiler improvements
scheduler patches
dynamic fsync disabled (more later)
cpu patches for msm
enabled last kernel message
many more

Community profiles for Synapse:
How to use shared profile?
Flash shared profile in recovery
Reboot to system
OpenSynapse
Go to tab "Synapse"
Check if last backup says "flashed" at the end (time buggy at the moment sorry)
Press "Restore & Close Synapse"
Open Synapse
Press X[ Cancel/B] at the top to use restored settings (if you press "✓ Apply" your last settings will be restored)
R11:
gianton:
Here's my current setup I'm testing on r11. It's more for battery saving, if you play lots of games set the governor to intelliactive.
Click to expand...
Click to collapse
Link to post for download

Tried to download but link empty
Sent from my SM-N9005 using Tapatalk

Does it have ntfs r/w support?
Sent from Hacker OS

IzArsha said:
Does it have ntfs r/w support?
Sent from Hacker OS
Click to expand...
Click to collapse
Should work if I did not make any mistake

panjaby said:
Tried to download but link empty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Downloads tested, all links should be working

Awesome kernel. Just one question, does it support GPU OC?

blogslogger said:
Awesome kernel. Just one question, does it support GPU OC?
Click to expand...
Click to collapse
Not yet, because I remember problems with frequencies are not used and also decrease performance with gpu set to 550
I just find the correspondending post by sorg
sorg said:
http://forum.xda-developers.com/member.php?u=3986004
About GPU overclock:
My phone is Samsung SHV-E330S, which is basically GT-N9005 in S4 case, so 99% hardware is the same.
According to my investigation in GPU overclocking, frequencies are handled fully inside RPM firmware. Frequencies in .dtsi files aren't used. RPM uses its own frequency table and cannot be changed from linux side. So, your GPU OC simply doesn't affect actual GPU frequencies. Linux GPU governor will think it uses new frequencies and will actually switch to a wrong frequency (because RPM will use hardcoded unmatched freq table) - so everything will go wrong (as you already noticed, probably).
I've monitored GPU/PLL hardware registers and saw, they work according RPM's table and not affected by .dtsi settings.
There is the only way to overclock SD800 GPU is by modifying PLL settings (as it was done for SD600 GPU). There is PLL for highest GPU powerlevel's frequency which used solely by GPU (just like in SD600). But performance increase is not so high as it could be from increasing RAM frequency OC (which i didn't manage to tweak yet).
P.S.: I don't know about N9005, but in E330S standard highest frequency is 550MHz (according to PLL settings) instead of 450MHz as advertized in MSM8974 (not AB or AC), although in .dtsi files max frequency is 450MHz. Good bonus from Samsung
Probably, in N9005 it's the same.
Click to expand...
Click to collapse
I might have a look into that in the future

Does it work with ND5 update

bhasg1007 said:
Does it work with ND5 update
Click to expand...
Click to collapse
Yeah, I am on ND5 rom with ND5 bl and NC2 modem

Downloaded Thanks for the reply will try now

Can I flash this kernel over lean kernel?
Tia
Sent from my SM-N9005 using XDA Premium 4 mobile app

Cool! A new kernel! gonna try it now and will be back with results in a day or two
Sent from my SM-N9005 using XDA Premium 4 mobile app

ghalib87 said:
Can I flash this kernel over lean kernel?
Tia
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Of course

MojoManagement said:
Downloads tested, all links should be working
Click to expand...
Click to collapse
Apologies. The fault must be on my end.
If I open the first link with chrome it goes blank with mojo wesite bit if I open the link directly with es downloader it downloads
Sent from my SM-N9005 using Tapatalk

MojoManagement said:
Not yet, because I remember problems with frequencies are not used and also decrease performance with gpu set to 550
I just find the correspondending post by sorg
I might have a look into that in the future
Click to expand...
Click to collapse
Thankyou for your patience. It was quite helpful to learn a new thing.

I have got a problem when put on usb charge it stays on high frequency and instead of charging, the phone battery gets dischaged slowly. anything i have to do.

[KERNEL] [N910C] [Ultimate Kernel] [v.10] [6.01.2015]

Thread is under developement​
We are back, we are proud to present Ultimate Kernel only for Exynos Note 4 [N910c]​
Code:
[U]Main feauteres:[/U]
-Patched to Linux 3.10.61
-Based on new Linaro 4.9.3
-Graphite and neon-vfpv4 optimisations
-Recoded on new Samsung "Update 1" sources
-Updated Ramdisc
-Wolfson Sound Control by AndreiLux (Synapse control, but with issue with non working mic in handsfree mode)
-Async Fsync
-CPU A57 Cluster - 700-2000 Mhz
-CPU A53 Cluster - 200-1500 MHz
-GPU Overclock (Kernel version)
-GPU throtling frequences moved to provide more perfomance
-Nvidia patches to increase perfomance
-A lot of File System tweaks
-Alot of device drivers updated
-Touchscreen updated driver
-Samsung input_boost driver re-worked for better smoothness
-Optimisations flags to increase perfomance
-Ondemamd governor was changed to another updated version which support BIG.little architecture
-BFQ-v7r6 scheldurer was added and setted as default
-SIO, SIOPLUS, FIOPS, FIFO, VR, ZEN, TRIPNDROID added ast the TEST, can work not properly, will be developed in future
-All TCP algorhytms now activated "bic, westwood, reno, cubic, highspeed, hybla,htcp, vegas, veno, scalable, lp, yeah, illinois"
-Alot of governors added "dancedance, Lionheart, smartmax, ondemandplus, smartassV2, wheatley, adaptive, nightmare, darkness, alucard, conservativex, intelliactive"
-USB Mass Storage mode added
-USB keyboard/mouse mode added (You can youse your smartphone as a mouse or keyboard, need activation in synapse and this [URL="https://play.google.co…te.hid.keyboard.client"]App[/URL] )
-Cpu_touch_boost ported and all settings included in Synapse
-Completely switched OFF "Samsung Rooting Restriction Feature"
-PowerEfficient Workqueues (Synapse)
-Gentle Fair Sleepers interface (Synapse)
-ARCH POWER cntl (Synapse)
-Force Fast Charge by ktoonsez (Synapse)
-DriveDroid patch
-Sweep2Sleep (Synapse)
-PowerSuspend v.1.5
-XZ(tweaked)(Core compression)
-KERNEL_MODE_NEON
-Lot of kernel/sched patches
-cifs: enable mounting cifs drives visible to all apps
-NTFS support
-Net TCP Optimization
-Sched: disable GENTLE_FAIR_SLEEPERS by defaul to increase UI smoothness
-disable add_random for more performance on SSD's
-Dynamic read-ahead
-FS Sync On/Off control
-Init.d suppor
-Synapse packed in installer
-Frandom (Activated by default)
-TARGET_TTL activated on core level (to bypass the ban on the distribution of Internet Yota) [url]http://habrahabr.ru/post/238625/[/url]
-Full SELinux Permissive
-KNOX disabled
-System folder RW (read/write)
-SecureStorage Disabled
-Disabled write protection on the external USB flash drive
-Screen Mirroring Fix built into the ramdisk
Code:
[U]Changelog Ultimate Kernel v.10[/U]
-Dynamic FSync
-Async Fsync
-dynamic read-ahead ( 1024 KB default)
-SELinux completely disabled
-block: sysfs: allow non superusers to change I/O scheduler
-net: ipv6: Add a sysctl to make optimistic addresses useful candidates
-массивные изменения Android Low Memory Killer (Management of not killable processes & enable)
-binfmt_elf.c: use get_random_int() to fix entropy depleting (4096 max)
-configurable android log buffer sizes
-register any S-View cover as authentic [LoungeKatt]
-enable CONFIG_SVIEW_BYPASS
-bcmdhd4358: WIFI PM support for KitKat driver
-config: enable BCMDHD_WIFI_PM
-bcmdhd4358: filter multicast packages while suspended
-USB: CR ROM emulation (DriveDroid app)
-Synapse: add SCREEN: LCD reduce power
-sched: LOAD_FREQ (4*HZ+122) avoids loadavg Moire
-add FIOPS I/O scheduler
-Alot of Synapse tweaks/tricks (BIG thx to UpInTheAir)
-Core patched to better stability/Perfomance/Battery Efficiency
-Tons of internal kernel patches/tweaks
Code:
[B][U]Before flashing please uncheck "Load settings on boot" flag in synapse. Its very important!
DISABLING DVFS CAN CAUSE REBOOTS IN POWER SAVE/XTREME POWERSAVE MODE!!![/U][/B]
[U]Download[/U]
[COLOR="Red"]<Mod Edit Links Removed.>[/COLOR]
Code:
[U]Source Code[/U] [COLOR="Red"][B][SIZE="3"]Mod Edit – Some content removed [/SIZE][/B][/COLOR]
Code:
Credits,and big thanks to:
-UpInTheAir
-AndreiLux
-Faux123
-Yank555.lu
-Friedrich420
-Dorimanx
-Alucard24
-Flar2
-Myfluxi
-Savoca
-TwistedUmbrella
-and to many many others!
XDA:DevDB Information
[Kernel][n910c][Ultimate Kernel], Kernel for the Samsung Galaxy Note 4
Contributors
da4kgr3y
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v.10
Created 2014-12-05
Last Updated 2015-06-11

Benchmark Results:

Reserved #2

Welcome master,bow this phone is really big monster.

All should be working now.

Welcome
wwwooooooooo Welcome mate.....
Is it 180 MB ????

None of the links other than the source are working.

da4kgr3y said:
Benchmark Results:
Click to expand...
Click to collapse
Awesome! I gonna love this!

Boooo I'm just getting web page can't be displayed, but links seem to be working for some grr, will keep trying

I think most of you remembers us from Nexus 5 and Note 3 Ultimate Kernels developing. Anticipating your questions I want to say that Note 3 developement is STOPPED. And never will be continued.
All our efforts are now directed to Note 4 developement. And one more thing. We support ONLY N910C version, not any one other. So we are glad that you understand!
Thank you!

Duncan1982 said:
None of the links other than the source are working.
Click to expand...
Click to collapse
My fault, all should be working now fine.

da4kgr3y said:
I think most of you remembers us from Nexus 5 and Note 3 Ultimate Kernels developing. Anticipating your questions I want to say that Note 3 developement is STOPPED. And never will be continued.
All our efforts are now directed to Note 4 developement. And one more thing. We support ONLY N910C version, not any one other. So we are glad that you understand!
Thank you!
Click to expand...
Click to collapse
thanks for being with us... lets start our journey
yes came from n9005
what is stock sound with gpu and without gpu??
thanks

da4kgr3y said:
My fault, all should be working now fine.
Click to expand...
Click to collapse
Yes working now my friend and looking forward to testing.
Thanks for now becoming a member of the Note 4 developer family
Your work will be very much appreciated.

Urban pendu said:
thanks for being with us... lets start our journey
yes came from n9005
what is stock sound with gpu and without gpu??
thanks
Click to expand...
Click to collapse
Wolfson Sound Control - analogue of FauxSound for snapdragon, but for Exynos. Improves the sound and makes it possible to significantly increase the volume.

Is that different the kernel from the N910C to the N910U ?? Just asking.

Just flashed successfully and will report back, all seems smooth thus far but I'm just 2mins in lol
Thanks again for bringing this to Exynos

Not all N910c GPU are equal, so we releaseв two versions with GPU OC and without for you can test can your GPU works with overclocked GPU or not. Cuz now its impossible to include GPU OC function in synapse!

Just for info I flashed Wolfson with GPU oc and its smooooth

With Wolfsond Sound Microphone does not work on the speakerphone mode!!! Its a bug, and we are working on it! If you often use Speakerphone mode please use standart sound kernel!

Finaly here
First for others - i downclock powersaving cores to just 200Mhz - its stable
Have some *two little problems*, or asks:
1. Antutu never finish: phone fall to reboot in 3D test (when that guy start walk).
2. Why are memory results in Geekbench that low? Before i had Single/Multi +- 1200/1350 and now it is 670/690 ?

[T-Mobile TW][Nadia Kernel][05-March-2015][4.4.4][Faux Sound]Emotroid Team

- Nadia nightly Kernel Note 4 -
SM-N910F/ SM-N910G/ SM-N910T/ SM-N910W8
Introducing the Emotion Revolution Roms & Nadia Kernels for Android Devices.​Emotroid Rom/Kernel is a modified, aftermarket firmware/Kernel distribution few Android devices (Note 2, Note 4, HTC M8). Based on the Android Open Source Project , Emotroid Rom & Kernel is intended to increase performance and stability over Android-based Devices released by sellers, for example, Samsung, HTC and so forth. Emotroid additionally offers a mixed bag of features & improvements that are not presently found in stock variants of Android.​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*** Disclamer***
Your warranty is now void.
We are not responsible for any damage or problems you may have!
YOU are choosing to make these modifications.
Click to expand...
Click to collapse
First of all I want to say this that is one project which just started and gradually we will improve it. In this community there are very good developers and we are not traying to compete with them. This is just a hobby and we do it because we like Android. This kernel is only for SM-N910F SM-N910G SM-N910T and SM-N910W8 and we don't have plans to make it compatible with other versions of Galaxy Note 4. We hope that you will not only download the kernel but also you will leave your feedback with pros and cons and you should respect our efforts.
Don't be scared by the nightly denomination of the kernel.
Thread IndeX
POST 1: Kernel Information, Changelog, Credits,Screenshots
POST 2: Synapse, Recommended settings, FAQ, etc.
POST 3: Know/Reported issues
Request new features here
Features:
Quote:
Based on Samsung Open Source N910FXXU1ANIE
Compiled with Toolchain Linaro GCC 4.9.3 2014.12 Cortex A15
Linux version 3.10.0
PowerSuspend Driver
Intelli-Plug V3.9
Sweep2wake
Simple GPU Algorithm
Voltage Control
Intelli-Thermal
mDNIe Hijack Mode
Led Control
CRC Settings
Advanced TCP control
S-View flip cover hack
Selinux Permissive
Sched: LOAD_FREQ (4*HZ+61)
Reduced wakelocks
Frandom number generator
Synapse full support
March- 5 -2015 nightly r7
-Added KCAL - Advanced color control (Thanks to @savoca for his great job) check this thread for more info
March- 3 -2015 nightly r6
-Based on XXU1ANK4 (KitKat version) and compatible with "F,G,T,V,W8"
-Kernel compiled with Linaro Toolchain 4.9.3 2015-02
-FauxSound updated to 3.6
-Fixed some issues in FauxSound and Synapse
-cpufreq: Introduced new relation for freq selection Introduce CPUFREQ_RELATION_C
-Interactive Governor: Use CPUFREQ_RELATION_C
-Added Gentle fair sleepers (Synapse -> KERNEL TWEAKS)
-Enabled Kernel SamePage Merging (KSM) (Synapse -> KSM)
-Added key disabler (Synapse-> SCREEN/MISC)
-Added userspace vibration strength control (Synapse-> SCREEN/MISC)
-Changed some stuff in Synapse
-Reverted some commits
-Another minor changes
January- 27 -2015 nightly beta r5
-FauxSound implemented
-FauxSound in Synapse (Thanks to Placiano)
-Added high performance mode in Synapse->Sound
-Fixed battery drain on wifi (My fault)
-Reverted another commits
January- 16 -2015 nightly r4
-Fixed cpu voltage control (No more 0MHz frequency in cpu voltage table)
-ASoC: wcd9xxx: use hwdep node for codec calibration
-ASoC: wcd9320: use hwdep nodes to get calibration
-ASoC: wcd9xxx: Changes for High performance mode
-ASoC: wcd9xxx: Change PA on and VDDIO switch sequence
-ASoC: wcd9xxx: Avoid micbias glitches during audio playback
-In conclusion better quality sound on headsets
-Sched/fair: reduced latency
-Decreased DHD_PACKET_TIMEOUT_MS to 250 ms (Before 500ms)
-Drecreased time to enter sleep
-Net: wireless: Increased scan entry expiration to fit new scan time
-PM: devfreq: Use high priority workqueue
-Msm: kgsl: Report correct GPU frequency in sysfs
-Some minor changes
January- 11 -2015 nightly r3
-Added Frandom as module and set by default (Synapse>I/O>Frandom) "For more info check this"
-Network speed tweak
-Reduced wakelocks "wlan_rx_wake" and "wlan_ctrl_wake"
-dtsi: realigned voltages with userspace values (Thanks to twistedumbrella)
-cpu-boost more performance (Thanks to franciscofranco)
-sched: LOAD_FREQ (4*HZ+61) "For more info check this"
-Interactive governor imported from the Nexus 6 (No more lag on interactive)
-Added bluactive and interactive_pro governors
-Reverted some changes that made the kernel laggy in some cases.
-Selinux set to permissive by default
-Gpu: msm: for higher priority you want to use nice level of -7
-Now you can change the governor tunables from Synapse (Issue fixed) (Thanks for the tip to AndreiLux)
-Synapse shows all the available gpu governors (Thanks to my friend Friedrich!)
-Cleaned some things in Synapse
-Other minor changes
January- 4 -2015 nightly r2
-Fixed Ondemand governor
-mm: slub: Default slub_max_order to 0 (Improved performance)
-Increased io performance
-writeback: fix occasional slow sync
-Fixed min frequency (Finally!)
-msm: Fix high load average from uninterruptible waits
-Cpu boost sysfs to enable/disable it (Synapse>cpu drivers)
-S-View hack (Twistedumbrella) enable/disable (Synapse>miscellaneous)
-Minor fixes
January- 1 -2015 nightly r1
-Based on Samsung Open Source N910FXXU1ANIE
-Compiled with Toolchain Linaro GCC 4.9.3 2014.12 Cortex A15
-PowerSuspend Driver
-Intelli-Plug V3.9
-Stereo Call Recording Support
-cpufreq_limit: don't override cpu min frequency
-Fast Charge V1.2
-Sweep2wake
-Simple GPU Algorithm
-Sysfs interface to Enable/Disable Logger Android (Default disable)
-Voltage Control
-Intelli-Thermal V1
-mDNIe Hijack control
-Advanced TCP control (westwood default)
-Sysfs interface to Enable/Disable CRC
-Dynamic Fsync Control V1.5
-Added Intelliactive, Smartmax and SmartassV2 governors
-Led Control
-Panel Color Control
-mDnie mode adapter for Synapse
-Selinux Enforcing/Permissive
-Synapse Support
Click to expand...
Click to collapse
Installation instructions
You need to have TWPR, CWM o Philz Recovery.
Download the last kernel
Reboot in recovery mode
Make backup (recommended)
Flash the zip
Downloads
Strictly No Mirrors Please. In the event that you need to make one ask us first with purpose behind what valid reason.
Current Version
After flash the kernel go to play store and download Synapse apk.
Nadia nightly r7 KK (Mediafire)
App to control your display : Color Control
Old version
Nadia nightly r6 LL (Mediafire)
Nadia nightly r6 KK (MEGA)
Nadia nightly beta r5 (Mediafire)
Nadia nightly r3 (Mediafire)
Nadia nightly r4 (MEGA)
Nadia nightly r4 (AndroidFileHost)
Nadia nightly r3 (Mediafire)
Nadia nightly r3 (MEGA)
Nadia nightly r3 (AndroidFileHost)
Nadia nightly r2 (Mediafire)
Nadia nightly r2 (MEGA)
Nadia nightly r2 (AndroidFileHost)
Nadia nightly r1 (Mediafire)
Nadia nightly r1 (MEGA)
Nadia nightly r1 (AndroidFileHost)
Click to expand...
Click to collapse
Our Projects:
Emotion Revolution for N7100 XDA / HtcSpain
EmotionMIUI for N7100 XDA / HtcSpain
Nadia nightly kernel for N7100
Nadia nightly kernel for m7
N910F/G XDA
​
​
Source code:
Nadia kernel Github​
Thanks To/Credits
Andip71, AndreiLux, apb_axel, Civato, Christopher83, DerTeufel, Faux123, Ffolkes, Flar2, Franciscofranco, Franlov, Friedrich420, Gokhanmoral, Infernum, LoungeKatt (TwistedUmbrella), Vanito, Yank555.lu, ZaneZam.
I hope I have not forgotten anyone!
Hit the "thanks" button if you like our work.
You can follow new updateshere (Spanish)
XDAevDB Information
Nadia Kernel, Kernel for the Samsung Galaxy Note 4
Contributors
Pafcholini, aukhan, jcanonico
Source Code:https://github.com/Pafcholini/Nadia-...-KK-OpenSource
Kernel Special Features: Faux Sound Support
Version Information
Status: Nightly
Current Stable Version: Nadia nightly r4
Stable Release Date: 2015-01-16
Current Beta Version: Nadia nightly beta r
Beta Release Date: 2015-01-27
Created 2015-01-01
Last Updated 2015-01-27
Twitter: @Pafcholini​
Click to expand...
Click to collapse

Reserved
Recommended settings & FAQ Synapse and all available options:
- LIVE STATISTICS: Time in states, Uptime,etc.
- CPU - GOV: cpu scaling, cpu governor and governor tunables.
- CPU voltage: separate frequency voltage.
- GPU: GPU scaling min/max frequency, GPU governor, Simple GPU Algorithm.
- I/O: schedulers, internal storage read-ahead, externalSD read-ahead, Frandom Module, Scheldure Tunables Internal/External
- CPU DRIVERS: PowerSuspend and Intelli-Plug
- THERMAL: Intelli-Thermal Control
- MISCELLANEOUS: Dynamic FSYNC Driver, Logger Mode, CRC Settings, S-View bypass, Selinux Status, Optimize Database.
- BATTERY: Live Statistics and Fast Charge
- MDNIE/SCREEN: Panel Control, mDNIe Mode and mDNIe Mode Hijack
- LED: Led Control
- SCREEN WAKE CONTROL: Sweep2Wake Control
- KERNEL TWEAKS: low memory killer, kernel entropy, panic and panic on oops.
- NETWORK: tcp congestion control, hardering the TCP/IP stack to SYN attack,ignore pings,etc.
- VM-FS: dirty radio, swappiness,etc.
- BUILD.PROP: Build.prop Tweaks
- LOGS: Clearn Synapse, Logcat and Dmseg
- INFO-REBOOT: info about the kernel, reboots,etc.
Click to expand...
Click to collapse
Balance between performance and battery
Quote:
Above is what I use personally. MAY NOT be optimal for all. Share your settings.
CPU frequency: 2649MHz/300MHz
CPU governor: Intelliactive or Bluactive for performance/ Interactive for battery
CPU voltaje: -25uV ((Be careful!! If you low voltages much you can get bootloop or battery drain.)
GPU: default values
I/O schedulers: row for both
PowerSuspend: hybrid hook
MPDECISION for performance/ Intelli-Plug for battery
Intelli-Thermal: enabled
MISCELLANEOUS: fsync enabled, logger mode disabled, crc disabled (you choice), Selinux Permissive
TCP: westwood for both
Click to expand...
Click to collapse
Aukhan recommended settings
1.
2.
F.A.Q
Can I flash this kernel on Note 4 SM-N910C or other variant?
No, you can not. This kernel is only for SM-N910F, SM-N910G, SM-N910T and SM-N910W8.
When I switch to Ondemand governor I noticed that cpu-boost is disabled.
Exactly, Ondemand and cpu-boost doesn't work well together. When you switch to Ondemand governor cpu-boost will be disabled automatically. Don't re-enable cpu-boost if you are using Ondemand governor. (Synapse>CPU DRIVERS)
Which app can control this kernel?
By default, the kernel is controlled by Synapse, but you can use the app that you like (Trickster Mod, Kernel Tweaker, etc.).
I flashed the kernel and Synapse says: "No support UCI detected".
Reflash the kernel, since it was a bad installation and Synapse does not detect the scripts.
After flashing the kernel lost root what to do?
In case you loose root just flash SuperSU
Any recommended settings to follow using Synapse?
At the beginning of the second post.
After flash the kernel some apks give me FC.
Go to Google Play Store and reinstall those apks.
From where can I remove int.d script?
Go to /system/etc/init.d using any root based file manager and delete.
Note: There is an important one related to superSU and if you remove it by mistake you're gonna have trouble with root permissions.
My device doesn't show any reaction to undervolting (battery life is same as before) or gets unstable even on light undervolting?
Use DVFS disabler Module(standalone) (dynamic voltage and frequency scaling), this feature was kept in touchwiz for benchmark boosting purposes and will conflict with any undervolting and custom governors because it scales the voltages and frequency on regular intervals and is framework integrated, so gets a higher priority than kernel based voltage and scaling controls.
For people who don't know what is DVFS please refer Wikipedia.
Min/Max frequency don't stick?
If your frequency settings don’t stick, it's because on certain Qualcomm devices, there are certain system services (thermald/mpdecision/project butter) or kernel service that rewrite frequency settings based on current thermal status and/or touch input.
I made a logcat but my file is empty. How I can "fix" it?
By default Android logger is disable. Go to Synapse > MISCELLANEOUS and enable Logger Mode.
What is it PowerSuspend?
This new powersuspend PM kernel driver is a replacement for it and existing early_suspend drivers. It should give better battery life.
What is it Intelli-Plug?
Intelliplug is a replacement for mp decision. Intelli-Plug is Faux123 open source solution to Qualcomm's closed source mpdecision. Intelli-Plug is disable by default. It conflicts with mpdecsion, so is HIGHLY recommend turning off mpdecision when using intelli-plug! (If you use Synapse the change is automatic. If you enable Intelli-plug mpdecision will turn off).
What is it Intelli-Thermal?
an intelligent MSM thermal throttling kernel driver designed to replace the
closed sourced thermald(aemon) from Qualcomm.
What is it Frandom?
Frandom is a kernel random number generator, which is 10-50 times faster than what you get from /dev/urandom. And it uses very little (/dev/frandom) or none (/dev/erandom) of the kernel's entropy pool, so it is very useful for applications that require a handy source for lots of random data.
What is it CRC?
CRC is a mechanism aiming to prevent data corruption when is enabled (reduce the performance around 30%). So if you disable it improve the performance but your data can be corrupted. Use it at your risk.
/sys/module/mmc_core/parameters/crc

Reserved1
Know/Reported/Fixed issues Know issues
1. Synapse doesn't show CPU governor tunables.
I'm trying to fix it. FIXED
2. Sometimes Synapse (and others kernel control apks) show that the min frequency is 1190MHz (or other frequency).
Just cancel it. FIXED
3. Ondemand doesn't work well. FIXED
Thanks for the report @Vangelis13
Any other Issues you may Report us and we will fix it

Reserved2
Reserved2

Reserved3
Reserved3

Reserved4
Reserved4

Reserved
Reserved last

Does WiFi calling works in this kernel?

mliou said:
Does WiFi calling works in this kernel?
Click to expand...
Click to collapse
I am assuming yes could you please flash and report back.

aukhan said:
I am assuming yes could you please flash and report back.
Click to expand...
Click to collapse
I will test it tonight but I read somewhere that it needs to be based on T-Mobile source for it to work.

I just want to say that I'm SO glad to see this thread / kernel in this subforum. To all my fellow N910T users: I've been using this kernel for a few weeks now after testing every other kernel available, and I've had the best experience by far on my N4 running Nadia kernel. The most recent release is incredible; stable as... something that's super-stable , FauxSound implementation! I have the paid FauxSound app and the sound quality of everything (in call and otherwise) is simply fantastic, if anything ever "goes wrong" for any reason, in my experience booting into recovery, reflashing the kernel and wiping dalvik/cache will fix it 99% of the time. I really encourage N910T users to give this kernel a shot. It solved pretty much every problem I was experiencing previously with my N4, and really made it run like I felt that the current primo device on the market should run! :good:
Edit: Make sure to install BusyBox on Rails, free from the Play store along with this kernel. You'll have problems with Synapse otherwise... very important - just wanted to make a note of that Also, settings-wise, I mostly used @aukhan's settings in the video and undervolted -25mV across the board, which is a very solid place to start from.

Just FYI wifi calling fails to connect

papped said:
Just FYI wifi calling fails to connect
Click to expand...
Click to collapse
I think the only way this works is if OP start from scratch using tmobile base.

I can also confirm that Wi-Fi calling gets error 82 failure to connect while using this kernel.
That said, if you don't need Wi-Fi calling this is an excellent, snappy, and stable build from my testing despite being in beta. I live in an area with good signal and I am impressed with it for sure. Dev has done good work here and brought another excellent kernel option to our device. :good:

jazzmachine said:
I just want to say that I'm SO glad to see this thread / kernel in this subforum. To all my fellow N910T users: I've been using this kernel for a few weeks now after testing every other kernel available, and I've had the best experience by far on my N4 running Nadia kernel. The most recent release is incredible; stable as... something that's super-stable , FauxSound implementation! I have the paid FauxSound app and the sound quality of everything (in call and otherwise) is simply fantastic, if anything ever "goes wrong" for any reason, in my experience booting into recovery, reflashing the kernel and wiping dalvik/cache will fix it 99% of the time. I really encourage N910T users to give this kernel a shot. It solved pretty much every problem I was experiencing previously with my N4, and really made it run like I felt that the current primo device on the market should run! :good:
Edit: Make sure to install BusyBox on Rails, free from the Play store along with this kernel. You'll have problems with Synapse otherwise... very important - just wanted to make a note of that Also, settings-wise, I mostly used @aukhan's settings in the video and undervolted -25mV across the board, which is a very solid place to start from.
Click to expand...
Click to collapse
Thanks a lot as you were first to confirm that the kernel is running smooth that is when we decided let's have a dedicated thread in here.

AlkaliV2 said:
I can also confirm that Wi-Fi calling gets error 82 failure to connect while using this kernel.
That said, if you don't need Wi-Fi calling this is an excellent, snappy, and stable build from my testing despite being in beta. I live in an area with good signal and I am impressed with it for sure. Dev has done good work here and brought another excellent kernel option to our device. :good:
Click to expand...
Click to collapse
Starting from the scratch becomes a little difficult I am sure there should be an alternate way of fixing this let me talk to @Pafcholini as he has moved to new place Internet is not setup yet so waiting for him.

AlkaliV2 said:
I can also confirm that Wi-Fi calling gets error 82 failure to connect while using this kernel.
That said, if you don't need Wi-Fi calling this is an excellent, snappy, and stable build from my testing despite being in beta. I live in an area with good signal and I am impressed with it for sure. Dev has done good work here and brought another excellent kernel option to our device. :good:
Click to expand...
Click to collapse
Starting from the scratch becomes a little difficult I am sure there should be an alternate way of fixing this let me talk to @Pafcholini as he has moved to new place Internet is not setup yet so waiting for him.

Flashing now.

Ditto

Me, too.

[Kernel][3.0.101] faZevoLv.kernel [5.0.x]

faZevoLv.kernel​
This is a new kernel based off the more stable Hashcodes kernel rather than the previous kernel named thomasin kernel which was based off MWisbest's kernel source which was unstable and caused many random reboots for me and a few other users. This is why this kernel was created, fast, feature packed, updated and most importantly STABLE. no random reboots.
Features and Updates
3.0.101 patches from franciscofranco
OMAP4460 overclocking from MWisbest
Makefile: Linaro build flags
Optimised LPDDR2 RAM timising for a 12% throughput increase
tweaked CFQ tunables from franciscofranco
cpuidle: update to saner values and optiisations
binder: fix memory leak
update LZO compression to upstream
ARM: enable unaligned memory access
use GNU implementation of lib/string & lib/memcpy
force kernel to follow unaligned code path
cfg80211: fix memory leak
ARM memset fixes
readahead: make context readahead more conservative
vmalloc: updates and fixes
net/loopback: set mtu to 64k
CPU hotplug: update debug
cpufreq: optimise frequency table verify and updates
vmscan: allow it to sleep if running too long
SELinux: updates and workarounds
omap4-common: activate scu speculative linefills
omap4-comon: enable full zeroes write mode
omap4-common: tune values to fit changes without double linefill
OMAP4: update ARM errata options
OMAP4 NAND updates
Add ultra-KSM
import lowmemorykiller from 3.4 kernel and tune & update
readahead: add dynamic read-ahead
dynamic management of dirty page writebacks
add support for lz4 compressor and decompressor module
add lz4 cryptographic api
use lz4 for kernel compression
add Lagfree governor
SIOplus i/o schedular and tune
ARM: implement optimised percpu variable access
permanent filesystem TRIM
Optimise apply_stack() for size and speed
network speed tweak
wakeup: use irqsave/irqrestore for events_lock
add Hyper governor
interactive governor fixes and updates
net: add APIs for manipulating skb page fragments
random: entropy tweaks
increase clock rate for dpll_core_m6x2_ck for OPP100
use SLUB allocator as default
use RCU boost
lib/sha1: use the git implementation of SHA1 as it is faster
ashmem: fix deadlock when low memory
bcmdhd: decreased wakelocks
mmc: decrease wakelock timeout
bcmdhd: workaround for broken AC video queue in IBSS mode
pcm_native: code fix
OOM tweaks: many oom tweaks and fixes (5 commits)
procfs: speed up /proc/stat
ARM: add optimised swahb32()
ARM: implemented cpu topology for multicore devices (12 commits)
introduce effective timer slack and PR_GET_EFFECTIVE_TIMERSLACK
introduce timer slack control
Dynamic management of timer slack
XDA:DevDB Information
Advanced kernel for lollipop, Kernel for the Amazon 7" Kindle Fire HD
Contributors
faZevoLv, Hashcode
Version Information
Status: Stable
Current Stable Version: 002
Stable Release Date: 2015-03-01
Created 2015-02-27
Last Updated 2015-02-27

Frequencies
> 350mhz (default min)
> 525mhz
> 768mhz
> 998mhz
> 1200mhz (default Max)
> 1350mhz
> 1500mhz
> 1632mhz
> 1747mhz
Governors
> Conservative
> Ondemand
> Powersave
> Interactive (default)
> Performance
> Hotplug
> Hyper
> Lagfree
I/O Schedulers
> CFQ (default)
> NOOP
> Deadline
> SIOplus
TCP Congestion Algorithm
westwood (default), reno, bic, cubic, htcp, vegas, veno, yeah​

Has it fixed battery life? As it was draining significantly than stock kernel..

You rock dude! Flashing right away.

xWolf13 said:
Has it fixed battery life? As it was draining significantly than stock kernel..
Click to expand...
Click to collapse
Yeah deep sleep is fixed, in the other kernel it did not go into deep sleep which was where the battery drained.

So when will it be completed? (And if it is completed, when can we download?) I'm itching to test it out.

Fireator said:
So when will it be completed? (And if it is completed, when can we download?) I'm itching to test it out.
Click to expand...
Click to collapse
Go to the downloads section at the top of the OP (the black bar) and download it

faZevoLv said:
Go to the downloads section at the top of the OP (the black bar) and download it
Click to expand...
Click to collapse
Thanks!

faZevoLv.kernel.002 is out!
Check the features list for the updates, the download link as always is in the downloads section

So how high does the GPU overclock to? And where can I go to change the frequency? Can I use trickstermod app?
BTW, its a pretty good kernel. Nice and smooth. Ever better when I use Seeder. Only thing I noticed was that it reboots every time I try to overclock it to 1747Mhz. 1500Mhz is the most stable for me so I'm sticking with it for now. Keep up the good work!!

Fireator said:
So how high does the GPU overclock to? And where can I go to change the frequency? Can I use trickstermod app?
BTW, its a pretty good kernel. Nice and smooth. Ever better when I use Seeder. Only thing I noticed was that it reboots every time I try to overclock it to 1747Mhz. 1500Mhz is the most stable for me so I'm sticking with it for now. Keep up the good work!!
Click to expand...
Click to collapse
ive not added the option to set your own gpu overclock yet, but it will be implemented in a future release thankyou!

Thanks a lot. Very stable and fast so far. I couldn't install double tap to wake. Your old kernel supports this right? Or did I use it elsewhere? Sorry been flashing lots of ROMs lately.
**seems my kindle can't handle a high oc for even short bursts. I set it to 1747 and 10 seconds later it went to bootloop. Shutting it down manually then restarting didn't work. Had to reboot in recovery. But I don't pretend to know precisely what I'm doing.
Have you or anyone else tested above 1500? And if it's working could you share the exact settings? Thanks.

KLit75 said:
Thanks a lot. Very stable and fast so far. I couldn't install double tap to wake. Your old kernel supports this right? Or did I use it elsewhere? Sorry been flashing lots of ROMs lately.
**seems my kindle can't handle a high oc for even short bursts. I set it to 1747 and 10 seconds later it went to bootloop. Shutting it down manually then restarting didn't work. Had to reboot in recovery. But I don't pretend to know precisely what I'm doing.
Have you or anyone else tested above 1500? And if it's working could you share the exact settings? Thanks.
Click to expand...
Click to collapse
Highest I can go to is 1632. No hiccups so far. Using Interactive Governer with Min Frequency set at 1200Mhz. At the moment I am testing out the new I/O Scheduler that was added, sioplus.

xWolf13 said:
Highest I can go to is 1632. No hiccups so far. Using Interactive Governer with Min Frequency set at 1200Mhz. At the moment I am testing out the new I/O Scheduler that was added, sioplus.
Click to expand...
Click to collapse
That's what I was doing except with a lower min value and it crashed. Not the system just the browser this time. I'm thinking not all kfhds are created equally.
Overall this has been pretty stable though when I keep it at or below 1500

KLit75 said:
Thanks a lot. Very stable and fast so far. I couldn't install double tap to wake. Your old kernel supports this right? Or did I use it elsewhere? Sorry been flashing lots of ROMs lately.
**seems my kindle can't handle a high oc for even short bursts. I set it to 1747 and 10 seconds later it went to bootloop. Shutting it down manually then restarting didn't work. Had to reboot in recovery. But I don't pretend to know precisely what I'm doing.
Have you or anyone else tested above 1500? And if it's working could you share the exact settings? Thanks.
Click to expand...
Click to collapse
This doesn't support double tap to wake as it stopped the device from going into deep sleep which caused the huge battery drain, sorry about that.
And yeah I usually stay at 1500, but the option is there for kindles that can handle higher

Not sure if this is related to kernel or ROM (beanstalk) but I'm getting incompatible a lot in play store. I tried market helper but apparently its not ready for lollipop yet. Is there a workaround or like I just considered now--lots of the apps aren't compatible with 5?

KLit75 said:
Not sure if this is related to kernel or ROM (beanstalk) but I'm getting incompatible a lot in play store. I tried market helper but apparently its not ready for lollipop yet. Is there a workaround or like I just considered now--lots of the apps aren't compatible with 5?
Click to expand...
Click to collapse
Yeah its because a lot of apps don't support lollipop, however most of them can be downloaded from your browser with a quick google search

I know this is way out there a year later, but any plan on updating to 5.1.1 CM based?