Hi i've two problem with CanBus on Vw Golf 6.
1. If i open APP for steering weel config i can't see any button and i can't configure anything
2. Doors open/close don't work. I can see Temperature, Oil, RPM but doors doesn't work at all
I've this problem with my actual PX5 KGL and with my old RK3188 unit
Details of my actual unit:
Type KGL
MCU 2.47
ROM Malaysk PX5 2.0
capu81 said:
Hi i've two problem with CanBus on Vw Golf 6.
1. If i open APP for steering weel config i can't see any button and i can't configure anything
2. Doors open/close don't work. I can see Temperature, Oil, RPM but doors doesn't work at all
I've this problem with my actual PX5 KGL and with my old RK3188 unit
Details of my actual unit:
Type KGL
MCU 2.47
ROM Malaysk PX5 2.0
Click to expand...
Click to collapse
1) car specific headunits which Steering wheel buttons control are based on Canbus Box CAN NOT BE MAPPED by the Steering Wheel APP. They are hardcoded to specific Headunit functions. There is a tool MTCDTools from @f1x that could help you to assign new functionalities to your SWC buttons.
2) I don't know why do you report it as a problem. It was promised to you that Doors Opening/Closing shall be working with the canbus box supplied? Each Can-Bus Box is capable to decode specific features of the car. If that functionality was not present on PX3 or PX5 is due to your can-bus CAN'T DECODE (or has not been programmed to decode) the open/close door system.
The CarSettings app just receive which functions are being decoded by your can-bus and show the decoded information received.
Can you point me to the location of the CarSettings app? I can't find it in my newly installed headunit. I couldn't find any in the Google play store.
I found a fix for you problem, capu81, you need to go to factory settings, Canbus and try to change the can bus setting with some other value. The can bus box has the ability to decode some dozen car types, and it's probably not set for your car properly. When this setting is done right the apps that everyone is looking for, the Car info and Car settings are going to be available and should contain all the old settings that were available on your factory head unit. The default password for accessing factory settings is usually 126.
And if the canbus decoder is not supporting your vw golf 6, then go to roadnavi and buy their CAN-bus Decoder and select the right model. Eg: RN Model: C257 Golf 7
Thank you to all for the answer.
The doors signal is not a big problem, l leave it in this way.
Steering Well remapping: with MTCD Tools i can create custom action. For example: i've button for MUTE. If i remap button with MTCD Tools and assign Vocal Google Search to it the action is fine but MTCD became MUTE. There is a way to disable factory action and use only MTCD Action?
I have this problem too (no mapping option) but my steering wheel works on my Ford Focus. Check your CAN Bus box and make sure the model of it matches what's selected in Factory Settings. My CAN Bus box is a Raise 06, likewise it is selected in Factory Settings to match it.
@capu81 I am having this same issue with my doors on my Erisin ES6405V. Currently emailing with Erisin back and forth trying to get this fixed. If there is ever an outcome, I will let you know.
capu81 said:
Thank you to all for the answer.
The doors signal is not a big problem, l leave it in this way.
Steering Well remapping: with MTCD Tools i can create custom action. For example: i've button for MUTE. If i remap button with MTCD Tools and assign Vocal Google Search to it the action is fine but MTCD became MUTE. There is a way to disable factory action and use only MTCD Action?
Click to expand...
Click to collapse
I have same exact issue. Did you find a solution to it?
Hello, I have the exact same problem only the other way around, my steering wheel buttons are mapped and working, car is showing open/closed doors but for oil, rpm, speed battery nothing. I tryed messing with the canbus setup and change to other setting from VWto maybe get it to work but no luck. Any ideas on how I can solve this? I have a MTCD unit px3 2GB 7.1.2
I have also problem with CANBus decoder. The only problem is that when i drive and change shift activate rearview camera, all the other stuff (swc, door signals and also reverse enable the rear view camera) works fine. There is something like update or a settings that works fine. I have a FIAT Bravo model >2007 and in factory settings seems to be all ok
dirty_dty said:
Hello, I have the exact same problem only the other way around, my steering wheel buttons are mapped and working, car is showing open/closed doors but for oil, rpm, speed battery nothing. I tryed messing with the canbus setup and change to other setting from VWto maybe get it to work but no luck. Any ideas on how I can solve this? I have a MTCD unit px3 2GB 7.1.2
Click to expand...
Click to collapse
j0nnymoe said:
@capu81 I am having this same issue with my doors on my Erisin ES6405V. Currently emailing with Erisin back and forth trying to get this fixed. If there is ever an outcome, I will let you know.
Click to expand...
Click to collapse
These are not "problems" - CAN Bus support depends on your car model, the manufacturer of the CAN Bus box and whether MTC/HCT have written the software for these things. If youve played araound with all the CAN Bus settings and not every function works then there is nothing you can do . . . apart from get hold of the CAN Bus protocol for your vehicle,, the MTCD MCU protocl and then write and app for it. There are 1000s and 1000s of cars on the market (and 1000s no longer made) it would be far too costly to make full CAN Bus support for EVERY car on sale, so only the most popular cars are supported and even then not all models and/or all functionality.
@j0nnymoe - dont waste your time contacting Erisin, they are a seller not a manufacturer and theres nothing they will be able to do.
@typos1 do you think maybe it can be fixed if I update the MCU to the latest version? It just seam strage for it to work in open/closed doors but not for the rest, I'm thinking maybe a mismatch of canbus and software and maybe that is why it dose not work. (Just a wild guess)
dirty_dty said:
@typos1 do you think maybe it can be fixed if I update the MCU to the latest version? It just seam strage for it to work in open/closed doors but not for the rest, I'm thinking maybe a mismatch of canbus and software and maybe that is why it dose not work. (Just a wild guess)
Click to expand...
Click to collapse
Updating the MCU may certainly help.
@typos1 that is good to know, I can keep my hopes high for a bit longer but I am sceptic about the MCU update [email protected] gave me.. He did not test it and there is nobody else I could find that updated to the latest version of XRC to confirm it is the right one.
dirty_dty said:
@typos1 that is good to know, I can keep my hopes high for a bit longer but I am sceptic about the MCU update [email protected] gave me.. He did not test it and there is nobody else I could find that updated to the latest version of XRC to confirm it is the right one.
Click to expand...
Click to collapse
What do you mean "the right one" ?
If you remember on the other thread, he just attached a dmcu file of the latest MCU for my XRC unit and said he did not tested it.
dirty_dty said:
If you remember on the other thread, he just attached a dmcu file of the latest MCU for my XRC unit and said he did not tested it.
Click to expand...
Click to collapse
I cant see any reason to doubt him.
@j0nnymoe - dont waste your time contacting Erisin, they are a seller not a manufacturer and theres nothing they will be able to do.
Yea I gave up on that a while ago. I've had a couple of these units before from other sellers (xtrons/eonon) and the canbus on those units worked fine. I suspect the KGL unit's doesn't like my car for some reason. I toyed with the idea of getting another canbus decoder..maybe if I can get one cheap enough I might try it.
j0nnymoe said:
@j0nnymoe - dont waste your time contacting Erisin, they are a seller not a manufacturer and theres nothing they will be able to do.
Yea I gave up on that a while ago. I've had a couple of these units before from other sellers (xtrons/eonon) and the canbus on those units worked fine. I suspect the KGL unit's doesn't like my car for some reason. I toyed with the idea of getting another canbus decoder..maybe if I can get one cheap enough I might try it.
Click to expand...
Click to collapse
Did you try another canbus decoder?
I've got an a3 and I'm using a kgl unit and nothing shows on my dis screen on the dash but when I've had a unit from xtrons before that did work.. I'm guessing kgl must use cheaper canbus decoders and I've been thinking like you and we're thinking of buying another decoder from xtrons to try
I updated the MSU and Seicane sent me a new system update. MCU is MTCE-2.65. After updating was complete i had lost my Bluetooth. WIFI works normal and all buttons around the HU is working normal Bluetooth is missing the device name and pass code that was there when it came stock. wont find my phone or odb2 adapter. I was wondering if there is a posiblity that it some how changed the Bluetooth settings?
Did you find a fix?
Hello Cody,
Did you get any feedback on this?
I've got the same problem on a MTCD GS unit, unresolved!
Richard.
Hello
I have a problem with my Android car radio, hope you can help. It's an Erison PX5 - LM MCU.
My problem is that the radio-app does not emit any sound and does not search any more. Other apps like Maps, Mediaplayer, Jetaudio make sound, only the radio-app doesn't.
Maybe someone here has a suggestion what else I could do or where I could look up something wrong. I already have an Android 10 ROM installed, did not solve the problem.
Other radio FM apps didn't work either.
I hope it's not a hardware problem. I love my radio .
My thanks also go to Alex from Alex Android Radio, who has already helped me a lot.
I hope for an answer.
snoopndh
Send it back for warranty once antenna connection validated as ok.
Do I win a prize
Hi,
I purchased an android head unit with CarPlay for my Toyota Camry 2016. Everything works fine but steering wheel controls and everything relating to car settings. I figured it was compatibility issues and headed to the canbus settings. To my surprise the head unit has basic device settings but no tab or app for advanced settings. I have installed over 15 various units for my clients so I can say I’m well versed in navigating android settings. Please I need help. I have searched online and have never seen a thread with such a problem. I have no information about the manufacturer. This is very bizarre indeed.
Shersman82 said:
Hi,
I purchased an android head unit with CarPlay for my Toyota Camry 2016. Everything works fine but steering wheel controls and everything relating to car settings. I figured it was compatibility issues and headed to the canbus settings. To my surprise the head unit has basic device settings but no tab or app for advanced settings. I have installed over 15 various units for my clients so I can say I’m well versed in navigating android settings. Please I need help. I have searched online and have never seen a thread with such a problem. I have no information about the manufacturer. This is very bizarre indeed.
Click to expand...
Click to collapse
Is the unit an FYT unit. Post pics from Android system info with MCU version
Also what does the seller recommend when contacted for support
Shersman82 said:
I have installed over 15 various units for my clients so I can say I’m well versed in navigating android settings. Please I need help. I have searched online and have never seen a thread with such a problem. I have no information about the manufacturer. This is very bizarre indeed.
Click to expand...
Click to collapse
Sometimes there is a separate CANbus application. So not in the Android settings itself. Did you check?
Hey folks, I have a similar related question. Newbie here, so feel free to point me in the right direction to post this question.
New Android head unit (MC Version: MCU02-K2611Q_FYD-RTL8761B-20220117_M1408-V2.01) branded KROAK K-CS02, but same hardware also branded JMACNE, and Binize.
Analogue steering control signals get all the way to 16 pin connector on back of head unit. But when in learning mode, unit doesn't recognise button being pressed. Keen for advice on diagnosing if there are configurations that I can tweak so it gets picked up.
The standard settings available don't seem to offer any tweaks, adjustments, diagnostics, etc.
Many thanks in advance!
OK!!!!! PLEASE help me oh geniuses of the XDA! I have the T'Eyes head unit for my car. The Bluetooth app sucks and the phone app REALLY sucks. Are there trusted apps to replace the Bluetooth manager and phone. I don't know if I'm wording my searches wrong or what, but I can't find anyting. Is there a phone app that you can install on one android device, and control the phone dialing and audio on another? I don't need Wi-Fi calling or google voice or anything like that. I want to control phone calls from the head unit that are coming from my phone. Thank You in advance!
Try reading to end of this thread but BT is not good on these HU.
Are there any Bluetooth client apps that aren't terrible?
I've installed I think around 7 android headunits and every single one has had a Bluetooth phone app that was bad to use. Last year I tried to find a better one, without luck. Any recommendations?
forum.xda-developers.com