Related
[ Lava Iris X5 Rooting Guide & General Discussion ]
Key Features:
Lava Iris X5 is a Smart Phone Powered by 5.00-inch HD 720x1280 pixels with 245 Pixels per inch (PPI) display,Android 4.4 KitKat,8 MP Auto Focus with with BSI Sensor for low light imaging and Broadcom 1.2GHz Quad Core processor coupled with Videocore IV GPU alongside 1GB RAM.
Rooting & Unlocking:
Code:
[B][SIZE="4"][COLOR="DarkRed"]Before You Begin[/COLOR][/SIZE][/B]
1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.
2. This should only work on Windows based PCs Preferably Windows-7
3. There should be at least 65% charge in your
4. Make a Backup of Your Contacts,SMS,And Whats App data in SD Card
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Iris X5 Root Toolkit [B][URL="https://drive.google.com/file/d/0B7OdRw3ALPgGdWcxOUx0c0llMGs/edit?usp=sharing"]Click Here To Download[/URL][/B]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Preparing Your Windows PC And Magnum X5 for Rooting:[/COLOR][/SIZE][/B]
Extract Downloaded Root Tool Kit to your Windows PC Desktop
Go to Settings >> Backup & Reset >> Factory data Reset in your Lava Iris X5 and Do a factory data Reset and Complete setups after it re-boots
Enable USB Debugging On your Device You can find this option in Settings >>Developer Option >>USB Debugging.
Enable Allow Installation of Apps from Unknown Sources under Settings >> Security >> Unknown Sources also Disable verify apps bellow Unknown Sources
Now Connect your device via USB cable to windows PC and Start installing programs which is provided in tool kit in same order
1.) Adb Driver Installer 2) BRCM_Driver_Package 3.)For Windows x64 Bit/For Windows x32 Bit 4.)VRoot_1.7.8.7753_Setup
Code:
[SIZE="5"][COLOR="DarkRed"][B]Rooting :[/COLOR][/SIZE][/B]
Open installed V-Root Program and Grant USB Debugging Authorization when a pop-up pops in your device Remember to tick always allow option.
When connection is established between V-Root program and your device it will display your device model and Root Button in Opened V-Root Program
If You See Green Colored Root button in V-Root Program Just click it and Wait silently with out touching your device .After some Times Your
Device will reboot (Remember Don't Disconnect USB cable until and Unless V-Root Program show success in your PC )
When you see Success message in PC remove USB Cable and Reboot Your Phone
Now Your Lava Iris X5 is Rooted
Restoring Stock Status/Firmware (Un-Bricking)
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Iris X5 Stock Firmware Version : Lava_x5_S109_20140816
[B][URL="https://docs.google.com/uc?id=0B1Hf9FzDNVqDWFl4NmZDMEMxdG8&export=download"]Click Here to Download[/URL][/B]
Download Lava Iris X5 SW DOWNLOAD TOOL [URL=" https://drive.google.com/uc?id=0B1Hf9FzDNVqDYklib3loRXozcjA&export=download"]Click Here to Download[/URL]
Download Breadcom Driver Package [URL="http://support.moulnisky.com/index.php?dir=Lava/Magnum%20X604/Tools/"]Click Here to Download[/URL]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Installation/Preparation[/COLOR][/SIZE][/B]
Extract all Downloaded package on your Windows PC Desktop
Install Breadcom Driver Package
Open Extracted Lava Magnum X604 SW DOWNLOAD TOOL
Run “vcredist_x86.exe” to install VC Redistributable.
Run Multi Downloader.exe as Administrator
Select “Setting->Configuration” to enter setting dialog.
Click “…” button. Select your image folder. and select the extracted lava iris x5 stock firmware folder
If an up level folder selected, tool will search all image package contained.
And list all packages for your selection.
Check Reset in after download mode
apply these configurations
[B][SIZE="4"]How to download [/SIZE][/B]
1. Click “start” on main GUI to enable download main process.
2. Take off the phone battery, unplug the USB cable (make sure the phone is fully
power off), then connect the USB cable from the phone to the PC, put back the
battery.
3. A user should see that the tool detects the device and start flashing.
4. Unplug the phone once the DIAG color is green. Please don’t unplug a phone if
the color is still in yellow. This will cause an error.
Now Your Device is Restored to Original condition like when it was opened from new box
Read more explanations from read me file Inside Lava Iris X5 SW DOWNLOAD TOOL.zip
Note: If You Are able to Produce Mirror links for Stock firmware and Tools feel Free to create and share it here so that i can add Those mirror Links in op to keep Files alive for Future Users
Credits
V-Root Developers
Sujyot GSM Zone
GSM Hosting
Chain fire
Please Don't say thanks in words Simply press Thanks Button Which is more Meaning full?
The-Immortal.
Awesome !!!
Thanks for your heads up :good:
This device looks gr8 in my opinion !
How is the battery life overall for mid usage ?
Also can we expect custom ROMs like cm11 for this device ?
Thanks in advance
Android0x7 said:
Thanks for your heads up :good:
This device looks gr8 in my opinion !
How is the battery life overall for mid usage ?
Also can we expect custom ROMs like cm11 for this device ?
Thanks in advance
Click to expand...
Click to collapse
Today late night I will post a guide to unbricking + stock firmware with detailed instructions
Expect custom recovery (TWRP and Philz )
Sooner
More response to threads means more development[emoji6]
LAVA IRIS X5 Unrooting
Hlo,
Thanks , i have successfully rooted my lava x5, also please explain the unroot procedure for the same..
Mohit Grover said:
Hlo,
Thanks , i have successfully rooted my lava x5, also please explain the unroot procedure for the same..
Click to expand...
Click to collapse
Instead of saying thanks simply press it there is a button ?
Give me some time I will put custom recovery also ...
Mohit - Pls help decide
Mohit Grover said:
Hlo,
Thanks , i have successfully rooted my lava x5, also please explain the unroot procedure for the same..
Click to expand...
Click to collapse
Hi Mohit,
Please help me decide in buying this phone.
Just let me know how is the screen quality according to u ,
Also hw is the battery backup for mid range use.
Thanks in advance.
Lava iris x5
Android0x7 said:
Hi Mohit,
Please help me decide in buying this phone.
Just let me know how is the screen quality according to u ,
Also hw is the battery backup for mid range use.
Thanks in advance.
Click to expand...
Click to collapse
Hlo Dear,
The phone is looks good and the screen quality is also impressive ( resolution 1280X720 ), the phone is very slim and light weight and but the battery backup is quite low during 3G uses , 8 mp rear camera with dual flash is also impressive and front camera (5 mp) with flash is great for selfies , supports HD recording.
You can play HD videos without using any third party app.
Overall the phone is best in this price range compared to others.
Thanks
Mohit Grover said:
Hlo Dear,
The phone is looks good and the screen quality is also impressive ( resolution 1280X720 ), the phone is very slim and light weight and but the battery backup is quite low during 3G uses , 8 mp rear camera with dual flash is also impressive and front camera (5 mp) with flash is great for selfies , supports HD recording.
You can play HD videos without using any third party app.
Overall the phone is best in this price range compared to others.
Thanks
Click to expand...
Click to collapse
Also please don't forget to mention poor audio quality in headphones .......(till now there is no way to increase headset volume coz of unknown audio configuration and drivers )
This is major point for many uses like me ...
Press Thanks Button If You like My Work & Posts?
Runtime Query
So I got this phone and was browsing for some root options already, in a recent post online I read that the phone has an option to switch to 'ART Runtime' instead of Dalvik. The ART Runtime is fast indeed.
My question is whether, if I use ART Runtime, will it be of any hindrance to the rooting?
joysontpeter said:
So I got this phone and was browsing for some root options already, in a recent post online I read that the phone has an option to switch to 'ART Runtime' instead of Dalvik. The ART Runtime is fast indeed.
My question is whether, if I use ART Runtime, will it be of any hindrance to the rooting?
Click to expand...
Click to collapse
You can always use art with out any hesitation
But in our stock ROM lava has not even provided a single customisation ....so ultimately for time being we have to depend on x-posed framework and modules which is incomparable with art
And also dome 3rd party applications are not fully art compatible so if we need customisation we need to stay in dalvik
If we don't need customisation we can safely stay in Art ...
I hope I cleared your doubt ?
Press Thanks Button If You like My Work & Posts?
Lag.....
My phone lags heavily...... I am wondering if this is a Device specific Error..... Or is it a problem with all the devices...... Will flashing the firmware help......
joysontpeter said:
My phone lags heavily...... I am wondering if this is a Device specific Error..... Or is it a problem with all the devices...... Will flashing the firmware help......
Click to expand...
Click to collapse
Is your device is rooted ?
If yes fallow the guide in bellow mentioned link to de bloat . ..and as per guide clean all junks provided by lava ....this will be definitely reduce lag factor ......
http://forum.xda-developers.com/showthread.php?p=55407805
Press Thanks Button If You like My Work & Posts?
LAVA IRIS X5 unroot
The-Immortal said:
Instead of saying thanks simply press it there is a button ?
Give me some time I will put custom recovery also ...
Click to expand...
Click to collapse
Hi,
I have unrooted my phone using Vroot official english version, which have unroot option also.
Please tell, how do i knw that, my phone is fully unrooted..
Mohit Grover said:
Hi,
I have unrooted my phone using Vroot official english version, which have unroot option also.
Please tell, how do i knw that, my phone is fully unrooted..
Click to expand...
Click to collapse
Hi mohit
In rooting process generally 2 files are copied to system ie su binary to system/xbin
And a root controller application
If you unroot the all will 1st delete su binary and and apk get uninstalled itself
Now install root explorer and check your
system/xbin for file named su if its not present then you are complete unrooted your device
I hope I cleared your doubt
Press Thanks Button If You like My Work & Posts?
Accessibility Service Not Working
The-Immortal said:
Hi mohit
In rooting process generally 2 files are copied to system ie su binary to system/xbin
And a root controller application
If you unroot the all will 1st delete su binary and and apk get uninstalled itself
Now install root explorer and check your
system/xbin for file named su if its not present then you are complete unrooted your device
I hope I cleared your doubt
Press Thanks Button If You like My Work & Posts?
Click to expand...
Click to collapse
Hlo,
During Installing third party Notification app in my X5 , i m unable to activate Accessibility Service any of the third party app as in the Accessibility option only system services are shown not third party. (Screen Shot is attached for your reference.)
please help ...!!!
Mohit Grover said:
Hlo,
During Installing third party Notification app in my X5 , i m unable to activate Accessibility Service any of the third party app as in the Accessibility option only system services are shown not third party. (Screen Shot is attached for your reference.)
please help ...!!!
Click to expand...
Click to collapse
I need a bit more details to help you
Can you tell the name of application ?
Press Thanks Button If You like My Work & Posts?
Accessibility Service Not Working
The-Immortal said:
I need a bit more details to help you
Can you tell the name of application ?
Press Thanks Button If You like My Work & Posts?
Click to expand...
Click to collapse
It's Like Iphone notifications , metro or wp7 notifications etc..
Nothing is working , cant enable to activate this service.
Mohit Grover said:
It's Like Iphone notifications , metro or wp7 notifications etc..
Nothing is working , cant enable to activate this service.
Click to expand...
Click to collapse
OK let me give a try I will let you know
By the way if you rooted heads up notification and hover is working beautifully via x-posed
Press Thanks Button If You like My Work & Posts?
Cyanogenmod
The-Immortal said:
OK let me give a try I will let you know
By the way if you rooted heads up notification and hover is working beautifully via x-posed
Press Thanks Button If You like My Work & Posts?
Click to expand...
Click to collapse
Hello,
My phone goes very slow after installing Themer, Next Launcher or Inspire Launcher, but i tried these launcher with other same config. phones , they works smoothly , tell me , what kind of problem is this.
Or please tell me if any custom recovery and cyanogenmod is available ...
Stock Firmware
Hey Ummm..... I need the Stock Firmware.....
How to enable camera2API on Huawei Honor4c.
I read many posts on camera2API and many says to add "persist.camera.HAL3.enabled=1" in buil.prop, but it didn't work.
Any suggestions?
ahmeddrraza said:
How to enable camera2API on Huawei Honor4c.
I read many posts on camera2API and many says to add "persist.camera.HAL3.enabled=1" in buil.prop, but it didn't work.
Any suggestions?
Click to expand...
Click to collapse
here https://vk.com/wall-111396109?w=wall-111396109_7/all
saying that it is for Qualcomm phones.
If you need RAW photo try to use freeDCam it can get it without camera2 api.
Hi
Here is my port of LineageOS 14.1 (7.1.1)
There are some errors:
- front camera (not found)
- video recording FC
- speakerphone (in call)
That is my list, maybe more exists...
ROM:
lineage-14.1-20170409-UNOFFICIAL-Ulefone_Paris.zip
TWRP:
TWRP 3.2.1.0 for PARIS.zip
Magisk:
Magisk-v16.0(1600).zip
Kernel force encryption on first boot:
kernel_enable_encryption.zip
Install instructions:
-install ROM
- if you want to encrypt phone internal storage on first boot (there is no go back to decrypted storage so, WARNING) flash "kernel_enable_encryption.zip"
- flash magisk
- reboot
If you want flash GAPP's
Please post your results, Thanx.
(ROM porters, fixers - feel free to port or provide fix for any error in this ROM)
Update:
1 - cam patch - cam_patch_v0.1.zip
Not only front cam, but back cam isn't 13MP it is 5.3 MP
Front cam is not even detected.
Could cam app and driver be imported from RR Rom?
Haven't encrypted internal memory.
I have tried it and it is working, basicly.
milan1984 said:
Not only front cam, but back cam isn't 13MP it is 5.3 MP
Front cam is not even detected.
Could cam app and driver be imported from RR Rom?
Haven't encrypted internal memory.
I have tried it and it is working, basicly.
Click to expand...
Click to collapse
I try many times to transfer camera from RR but no luck, yet...
g0didit said:
I try many times to transfer camera from RR but no luck, yet...
Click to expand...
Click to collapse
I suppose that there is needed to be transferred all lib and lib64 libcam*.so files and app itself. To give correct permission, and to push those files to those folders. Is @cuvetto active on this phone?
I have remembered that lenovo k4 note, have compatible MM rom, maybe and Nougat also is compatible?
I'm alive, and I still have my ulefone Paris.....
Maybe in future I can help @g0didit to improve this rom......
cuvetto said:
I'm alive, and I still have my ulefone Paris.....
Maybe in future I can help @g0didit to improve this rom......
Click to expand...
Click to collapse
I was thinking to contact you, please, feel free to help, mod, add , whatever...
@milan1984 I already try all of that.... no luck...
I think I am close to fix camera
First patch for camera.... (more to come soon as I got time, others feel free to help)
- resolution fixed (front cam 8.3M ????)
- don't use flash - no flash cam work (if shoot with flash, cam freeze and then got camera under your desktop need to reboot to work again)
- recording not work - FC
cam_patch_v0.1.zip
(OP updated)
I'm just curious, is anyone interested?
g0didit said:
I'm just curious, is anyone interested?
Click to expand...
Click to collapse
Ofc, any known bugs?
milan1984 said:
Ofc, any known bugs?
Click to expand...
Click to collapse
I just boot, try WLAN and SIM cards... nothing else..
Got new kernel from Tesla rom... so I will try to fix currently posted images instead of making another half working ROM
Do you got problems with charging and battery ? @xmarx got a lot of problems with battery and chaging...
I didnt used Lineage to long because of battery drain and camera not working, since I needed it, but MIUI I would like to try. Is there any link for that MIUI?
I have reinstalled LineageOS rom for two last days, and ROM it self is working pretty smooth. (My settings is always xperia keyboard, home, music, weather widget, xposed , all working via Magisk)
Since Tesla/Ulefone Paris is piece of crap with battery and default charger, could it be hardware problem? Even USB charging is working fine with me.
Can anybody help me with this problem? I have broken screen on my phone and purchase the new one, and when i change the new lcd the screen is not show any pictures, it was just light (blue), so i contact seller and he say that for this new screen i got to flash the newest original firmware from ulefone paris (S511_E11_GQ3025AH2_PARIS_MM_20161019) and he give me link where to download and it realy works. I dont know how but now with new firmware android 6.0 lcd screen full working. But now i have the problem, because i cant install any custom rom anymore (because the screen will not work) i cant get ROOT anymore... I try mant things like flash only recowery TWRP all version, i try with kingoroot.....etc nothing working i also try to install via adb but not lucky..... Can anybody help me how to get root?
WARNING:
YOU MUST INSTALL THE A/B PARTIRION ROM FOR CC9/Mi 9 LITE. IF YOU INSTALL THE TREBLE CHECK APP, YOU THINK THIS DEVICE IS A ONLY PARTITION. IT'S NOT A ONLY!! IF YOU INSTALL A ONLY GSI IT STUCK IN BOOTLOGO. SO YOU MUST DOWNLOAD THE A/B PARTITION
# DOWNLOAD #
First, Download this files. (I recommend install EU Weekly 9.10.31 vendor or after new weekly version vendor)
Pixel Experience Android 10 GSI: https://drive.google.com/uc?id=1Sw96w1J_ZymUh9J7ayhqYrlLZwhuQjJB&export=download (A/B)
after download, extract .zip file!
EU(Weekly):https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-WEEKLY-RELEASES/9.10.31/
magisk(optional):https://github.com/topjohnwu/Magisk/releases
# INSTALL STEP #
0. You must Unlock Bootloader and install twrp.
1. Move files to your phone and install Xiaomi.eu Weekly rom. after you install done wipe -> advanced wipe -> check system, dalvik, data, cache(don't check the vendor!!) and swipe.
2. Install -> and check Install Image -> select PixelExperienceQ-28101028-ARM64-AB.img -> check system image and swipe. now install is done. if you install magisk flash 20.1 or 20.0
3. Reboot.
and phone is booted. now install is finish!
# Whats Working? #
WIFI
Mobile Data(LTE, 3G work)
Bluetooth
Hospot
Camera(Gcam too)
Audio
Brightness control
LED
Dark Mode
FOD
Ambient Display
etc..
# Not working #
VOLTE
ANXCamera(app open is working but if you take pictures it has been stopped)
etc..
ScreenShots!:
Works way, way better than I would've expected for a GSI.
So far, the only gripes I have with the ROM are:
- The fingerprint reader is not really accurate nor fast, but adding the same finger a bunch of times improves the reliability;
- Double tap to wake is missing;
- As far as I've seen, there's no way to disable the Ambient Display. Normally that wouldn't be a problem, but it doesn't turn off when the device is laying flat for a while nor when it's in a pocket. Kinda concerned with burn-in;
Everything Magisk/Root related works fine, except for Viper4Android or Dolby Atmos.
Didn't have any issues restoring backups with Titanium, so far I haven't experienced a single crash.
Great job, man!
EDIT: So, three things I found out while using the ROM: first, there actually is a way to disable the Ambient Display, yay! Google simply moved it in the display settings, under the section that lets you control how notifications behave on the lockscreen. Weird, but it works.
Secondly, Bluetooth earbuds and speakers stopped working after a while: the phone connected to both devices, but didn't play media through them. Apparently this is an Android 10 bug that happens occasionaly, had to re-do a clean install to fix it.
Thirdly, the microphone doesn't work when sending WhatsApp voice notes. Haven't had time to actually call someone and see if it works there, but I'll add onto this post once I'll check.
iuliusdeblobbis said:
Works way, way better than I would've expected for a GSI.
So far, the only gripes I have with the ROM are:
- The fingerprint reader is not really accurate nor fast, but adding the same finger a bunch of times improves the reliability;
- Double tap to wake is missing;
- As far as I've seen, there's no way to disable the Ambient Display. Normally that wouldn't be a problem, but it doesn't turn off when the device is laying flat for a while nor when it's in a pocket. Kinda concerned with burn-in;
Everything Magisk/Root related works fine, except for Viper4Android or Dolby Atmos.
Didn't have any issues restoring backups with Titanium, so far I haven't experienced a single crash.
Great job, man!
EDIT: So, three things I found out while using the ROM: first, there actually is a way to disable the Ambient Display, yay! Google simply moved it in the display settings, under the section that lets you control how notifications behave on the lockscreen. Weird, but it works.
Secondly, Bluetooth earbuds and speakers stopped working after a while: the phone connected to both devices, but didn't play media through them. Apparently this is an Android 10 bug that happens occasionaly, had to re-do a clean install to fix it.
Thirdly, the microphone doesn't work when sending WhatsApp voice notes. Haven't had time to actually call someone and see if it works there, but I'll add onto this post once I'll check.
Click to expand...
Click to collapse
Hey man, you still using this rom? how is the experience so far? I plan to install tmr, I wonder if it's stable enough for daily driver
this is very exciting! does this also mean that official pixel experience rom will soon be coming to cc9/mi 9 lite?
vannrith said:
Hey man, you still using this rom? how is the experience so far? I plan to install tmr, I wonder if it's stable enough for daily driver
Click to expand...
Click to collapse
TL;DR: Yeah, as long as you don't care about the camera and the stuff I mentioned in my previous post!
Long version: I've been using this ROM as my daily driver ever since, and I really haven't noticed any actual deal breakers.
Performances are great, I'd say on par with MIUI! No stutters, everything feels really responsive and I'm able to hit a consistent 60FPS on high details while playing Call of Duty: Mobile.
DT2W is missing, but I've been using "Always on AMOLED" from the PlayStore, which apart from offering a customizable Ambient Display with burn-in protection also sort-of enables that feature.
The microphone does work, it's just that since I restored WhatsApp with Titanium Backup I had to manually allow the microphone permission. Oops.
If you use Bluetooth Headphones, though, they don't work while using the Google Dialer.
GCam sort of works? There's a 6.2 build for the Mi 9 SE which is kind of compatible, but the experience is really hit or miss. So far, I've not been able to find a MIUI camera port that doesn't crash on lunch or a more optimized GCam.
Apart from that, I'm loving this ROM. It's really all I'll need until a build of HavocOS will be available for our device
EDIT: ANXCAMERA IS WORKING! All you have to do is to download the latest zip and change the "ro.product.device" value to "pyxis" inside the build.prop file ^^
iuliusdeblobbis said:
TL;DR: Yeah, as long as you don't care about the camera and the stuff I mentioned in my previous post!
Long version: I've been using this ROM as my daily driver ever since, and I really haven't noticed any actual deal breakers.
Performances are great, I'd say on par with MIUI! No stutters, everything feels really responsive and I'm able to hit a consistent 60FPS on high details while playing Call of Duty: Mobile.
DT2W is missing, but I've been using "Always on AMOLED" from the PlayStore, which apart from offering a customizable Ambient Display with burn-in protection also sort-of enables that feature.
The microphone does work, it's just that since I restored WhatsApp with Titanium Backup I had to manually allow the microphone permission. Oops.
If you use Bluetooth Headphones, though, they don't work while using the Google Dialer.
GCam sort of works? There's a 6.2 build for the Mi 9 SE which is kind of compatible, but the experience is really hit or miss. So far, I've not been able to find a MIUI camera port that doesn't crash on lunch or a more optimized GCam.
Apart from that, I'm loving this ROM. It's really all I'll need until a build of HavocOS will be available for our device
EDIT: ANXCAMERA IS WORKING! All you have to do is to download the latest zip and change the "ro.product.device" value to "pyxis" inside the build.prop file ^^
Click to expand...
Click to collapse
I used to install Havoc GSI pie on my phone, Anx camera works, calling and stuff work, but no viper and FOD sucks. I'll try this one myself. Thanks so much
vannrith said:
I used to install Havoc GSI pie on my phone, Anx camera works, calling and stuff work, but no viper and FOD sucks. I'll try this one myself. Thanks so much
Click to expand...
Click to collapse
Got Viper4Android working! All you need is to flash this magisk module; I found it on the HavocOS GSI general thread
Hi @hanbin81j32 ,
Was this GSI image created by yourself? If not, do you know where it originated or who built it?
Thanks.
peppertarts said:
Hi @hanbin81j32 ,
Was this GSI image created by yourself? If not, do you know where it originated or who built it?
Thanks.
Click to expand...
Click to collapse
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
This GSI creater is ExpressLuke
hanbin81j32 said:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
This GSI creater is ExpressLuke
Click to expand...
Click to collapse
Wait, does this mean that the ROM wasn't modified to enable the fingerprint scanner? If I were to flash another GSI on top of the MIUI vendors would it still work?
since no REAL bugs exist in this rom, can someone take this GSI and patch it to make it only for 9 lite with necessary fixes? thanks!
Foreal_Bruh said:
since no REAL bugs exist in this rom, can someone take this GSI and patch it to make it only for 9 lite with necessary fixes? thanks!
Click to expand...
Click to collapse
Yes, i'd love to see a Pixel Experience 10.0 ROM for the Mi 9 Lite, I've just ordered this phone 2 days ago, excited to see this subforum grow!
waiting hopefully.
iuliusdeblobbis said:
Got Viper4Android working! All you need is to flash this magisk module; I found it on the HavocOS GSI general thread
Click to expand...
Click to collapse
flash this first or flash the viper first man? I tried, not working. I installed Viper legacy, it asks me to install driver all the time
vannrith said:
flash this first or flash the viper first man? I tried, not working. I installed Viper legacy, it asks me to install driver all the time
Click to expand...
Click to collapse
I got the Viper4Android 2.7 apk from XDALabs, once I installed it I flash Audio Modification Library, the module I linked and after a reboot it all worked
I'm waiting for the release to unlock my bootloader and test ... Is this GSI matching notification icons to notch size?
I was able to install, but FOD didn't work
Your tutorial works with the latest version
Although the fp placement on the screen no longer shows up, you have to guess where it is I think, anyone know how to fix that?
hanbin81j32 said:
WARNING:
YOU MUST INSTALL THE A/B PARTIRION ROM FOR CC9/Mi 9 LITE. IF YOU INSTALL THE TREBLE CHECK APP, YOU THINK THIS DEVICE IS A ONLY PARTITION. IT'S NOT A ONLY!! IF YOU INSTALL A ONLY GSI IT STUCK IN BOOTLOGO. SO YOU MUST DOWNLOAD THE A/B PARTITION
# DOWNLOAD #
First, Download this files. (I recommend install EU Weekly 9.10.31 vendor or after new weekly version vendor)
Pixel Experience Android 10 GSI: https://drive.google.com/uc?id=1Sw96w1J_ZymUh9J7ayhqYrlLZwhuQjJB&export=download (A/B)
after download, extract .zip file!
EU(Weekly):https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-WEEKLY-RELEASES/9.10.31/
magisk(optional):https://github.com/topjohnwu/Magisk/releases
# INSTALL STEP #
0. You must Unlock Bootloader and install twrp.
1. Move files to your phone and install Xiaomi.eu Weekly rom. after you install done wipe -> advanced wipe -> check system, dalvik, data, cache(don't check the vendor!!) and swipe.
2. Install -> and check Install Image -> select PixelExperienceQ-28101028-ARM64-AB.img -> check system image and swipe. now install is done. if you install magisk flash 20.1 or 20.0
3. Reboot.
and phone is booted. now install is finish!
# Whats Working? #
WIFI
Mobile Data(LTE, 3G work)
Bluetooth
Hospot
Camera(Gcam too)
Audio
Brightness control
LED
Dark Mode
FOD
Ambient Display
etc..
# Not working #
VOLTE
ANXCamera(app open is working but if you take pictures it has been stopped)
etc..
ScreenShots!:
Click to expand...
Click to collapse
Not working
Cant even open the file
VyktorJonas said:
Your tutorial works with the latest version
Although the fp placement on the screen no longer shows up, you have to guess where it is I think, anyone know how to fix that?
Click to expand...
Click to collapse
did you use this version?
PixelExperience_ARM64-AB-10.0-20191115-1221-BETA-UNOFFICIAL
Releases · a406010503/Miui_Camera
一個基於 MIUI 13-14（Android 12-13）適配的 Magisk 相機模組。. Contribute to a406010503/Miui_Camera development by creating an account on GitHub.
github.com
https://github.com/a406010503/Miui_Camera/releases/download/Miui_Camera_4.5.000851.0_220924/Magisk-MIUI_Camera-v220924-Pre-dev.zip
Instructions in chinese but app isn't. Best app by far, all settings even unlocked dev settings in stock app. Mandatory camera app in my mind and will replace current camera.
Volume (+) on first prompt, Volume (-) on second prompt, make sure it says installation completed. Your Welcome.
Thanks for the tip. This adds some great settings to the stock camera app.
Is this the same as if the xiaomi.eu ROM is flashed?
steffenmix3 said:
Is this the same as if the xiaomi.eu ROM is flashed?
Click to expand...
Click to collapse
It significantly extends the xaiomi.eu ROM camera as well.
phzi said:
It significantly extends the xaiomi.eu ROM camera as well.
Click to expand...
Click to collapse
Hi,
That sounds awesome, could you please explain how it extends the xiaomi.eu ROM camera ? I wasn't able to find much on the github ReadMe page.
Thanks!
Can someone please tell a noob how to install this? I tried reading instructions several times, but still don't have a clue ...
Pindarm said:
Can someone please tell a noob how to install this? I tried reading instructions several times, but still don't have a clue ...
Click to expand...
Click to collapse
1.Unlock boot loader;
2.Install Magisk;
3.Flash this module in the magisk manager;
Jdorman12 said:
Releases · a406010503/Miui_Camera
一個基於 MIUI 13-14（Android 12-13）適配的 Magisk 相機模組。. Contribute to a406010503/Miui_Camera development by creating an account on GitHub.
github.com
https://github.com/a406010503/Miui_Camera/releases/download/Miui_Camera_4.5.000851.0_220924/Magisk-MIUI_Camera-v220924-Pre-dev.zip
Instructions in chinese but app isn't. Best app by far, all settings even unlocked dev settings in stock app. Mandatory camera app in my mind and will replace current camera.
Volume (+) on first prompt, Volume (-) on second prompt, make sure it says installation completed. Your Welcome.
Click to expand...
Click to collapse
I got a installation failed message, see screenshot. any idea? thx
Lavendel Queen said:
I got a installation failed message, see screenshot. any idea? thx
Click to expand...
Click to collapse
When it says "....keycheck..." you need to press volume up button (I did it several times). Then it will continue with the installation.
When it says "....keycheck..." again, press volume down button. This should result to a successful installation. Good luck
Kris Chen said:
1.Unlock boot loader;
2.Install Magisk;
3.Flash this module in the magisk manager;
Click to expand...
Click to collapse
Thank you
Pindarm said:
When it says "....keycheck..." you need to press volume up button (I did it several times). Then it will continue with the installation.
When it says "....keycheck..." again, press volume down button. This should result to a successful installation. Good luck
Click to expand...
Click to collapse
It works now, thank you very much! Some cool features, as the "handshake mode" to taken pictures
Hi,
Install worked no problem, camera works.
How do you revert to the stock camera though ? Simply deactivating module won't work for me.
Thanks
Will.1 said:
Hi,
Install worked no problem, camera works.
How do you revert to the stock camera though ? Simply deactivating module won't work for me.
Thanks
Click to expand...
Click to collapse
Since this is a newer version I believe if you put the APK file in the magist module and replace it with the stock one it will work. I don't believe it will revert because it's a system application, although there really isn't any reason to go back to the stock one as they are like four versions behind on the rom. As long as these guys are staying up to date this should be the best camera app.
Installation on the 11T Pro (MIUI 13/ A12) without any problems. Works perfectly and is an enrichment for the original camera.
Anybody else find this modded camera buggy and slow as hell. I ended up grabbing the latest apk of the normal version.
Who are all the others?
The tool runs without problems for me.
steini.71 said:
Who are all the others?
The tool runs without problems for me.
Click to expand...
Click to collapse
Ran laggy sometimes when shooting, sometimes switching to portrait mode would freeze the camera. I went back to original camera. The github is showing new releases nearly daily now so I suspect performance shall improve and bugs removed.
The advanced features are cool though.
EDIT: Latest releases are rock solid. I'm using this now as my main camera.
ukon16 said:
Ran laggy sometimes when shooting, sometimes switching to portrait mode would freeze the camera. I went back to original camera. The github is showing new releases nearly daily now so I suspect performance shall improve and bugs removed.
The advanced features are cool though.
Click to expand...
Click to collapse
No problems here. Been using it for a month on eu rom
Would you rather recommend this one or GCam from here?
Gcam
Is there a working Gcam for the 12s Ultra?
forum.xda-developers.com
I have no experience with camera apks and was wondering which one brings the better software for the 12s Ultra.
Avoid latest version of the module