soft brick a7 2018 - Samsung Galaxy A7 (2018) Questions & Answers

Hi guys today i disable the OEM and my phone cant boot and say "Custom binary blocked by frp lock" and i cant in to the download mode...plz help

Put your device in DOWNLOAD mode (VOL DOWN + VOL UP Then connect PC USB).
Flash the original stock firmware.

Related

huawei ascend g525 roOTED and corrupted my device

Cani get the stock firmware
G525-U00v100r001C00b189
Emotion ui 1.0
Can anyone send me the download link
Please help
To enter in fastboot mode:
1) Remove battery for >= 10 seconds
2) Replace the battery
3) Hold volume down and power button
4) When the screen locks on the Huawei logo you're in fastboot mode
5) Connect the device via USB
run:" fastboot devices" and see if it's listed
run: "fastboot oem unlock [unlockcode]"
For German firware - http://rom.android-host.de/HUAWEI/G525/B188/G525_U00_B188.zip
can I install the German firmware
turffe said:
To enter in fastboot mode:
1) Remove battery for >= 10 seconds
2) Replace the battery
3) Hold volume down and power button
4) When the screen locks on the Huawei logo you're in fastboot mode
5) Connect the device via USB
run:" fastboot devices" and see if it's listed
run: "fastboot oem unlock [unlockcode]"
For German firware - [CDA prevented to post outside links]
I have unlocked the boot loader now what my firmware is
C00b189 can I install tHe German firmware
Is there any risk
Click to expand...
Click to collapse
affan8054 said:
turffe said:
To enter in fastboot mode:
1) Remove battery for >= 10 seconds
2) Replace the battery
3) Hold volume down and power button
4) When the screen locks on the Huawei logo you're in fastboot mode
5) Connect the device via USB
run:" fastboot devices" and see if it's listed
run: "fastboot oem unlock [unlockcode]"
For German firware - [CDA prevented to post outside links]
I have unlocked the boot loader now what my firmware is
C00b189 can I install tHe German firmware
Is there any risk
Click to expand...
Click to collapse
Since you have unlocked bootloader there's no risk of flashing different region firmware...
Click to expand...
Click to collapse
is this firmware tested
I have read the PDF file it says that you can upgrade if you have firmware less than b188 (like eg:b187)but mine b189 can I still upgrade did you tested it
Thanks for the help your are my saviour
ok now i have succesfully upgraded my firmware was b189 which was buggy and i have downloaded the firmware from huawei russian site
(HELP)huawei g525 reatore to stock.
now i have a custom recovery a.k.a miui recovery and flashed a miui rom and getting bug that whenever i lock the screen i cant unlock it
please help to come at stock rom
can i apply the dload method copying update.app in sd card method and my boot loader is unlocked
Okay now I have flashed back to stock the problem now is solved every thing came back to stock even recovery but the boot loader is still unlocked.I have downloaded the firmware from huawei Russian site
Hit thanks if helped...
HUAWEI G525

G920F Bricked!!! Custom Binary

Hi there. I`m blocked in download mode and custom binary(recovery) blocked by r/l. I tried to flash stock with odin but odin can`t see my phone now and windows sais that usb device not recognized because devices attached has malfuntioned. Any help? What should i do? In download mode say odin mode on top.
Did you disable reactivation lock & if necessary, unlock bootloader before trying to flash whatever you flashed to break it?
Sent from my SM-G920W8 using Tapatalk

Can't enter fastboot mode after unlocked

I have unlocked my Huawei tablet using
Code:
oem shell
-> reboot fastboot
and later in fastboot mode:
Code:
fastboot oem unlock <pw>
now each time I am trying to enter the fastboot mode I get the
nasty "Your device has been unlocked and can't be trusted"
and throw me back to the regular boot.
Any idea what else I can try?
Code:
The info of my model is:
Named: Huawei M3 Youth
Model: CPN-AL00
Firmware: : MSM8940C00B056SP01M_AMSSJun28201718:26:30
Hardware ver: : SH1CHOPINAL0M-V2
its ok, because you unlockedto bootloader...
if you want go to fastboot the hold power + volume down until you see the device is booting,
nordscan said:
its ok, because you unlockedto bootloader...
if you want go to fastboot the hold power + volume down until you see the device is booting,
Click to expand...
Click to collapse
Thanks for the reply but nop in HuaWei the gicky stuff comes with volume up button but in that case the
same thing I get the ugly text message and normal boot :/
Any other ideas?
Found it: you really hold the volume down and just plug the USB cable no other
actions required, it will turn on into the fastboot mode.
i have a insignia with same problem get nasty mess. bootloader error code 3 but can not get to boot to fastboot mode only factory recovery . in factory recovery mode i select reboot to bootloader and if just restarts again with same bootloader mess. error code 3

FRP Locked error

Guys, I tried to flash TWRP recovery on my A7, build number xxu1asa4.
I unlocked OEM first, then booted into download mode to install system and suddenly disconnected my phone from PC:
"Custom binary blocked by FRP lock"
I have locked OEM now, no recovery access, and there is a soft brick in my smartphone. :crying:
Does anyone know how to fix that issue?
NickDeveloper said:
Guys, I tried to flash TWRP recovery on my A7, build number xxu1asa4.
I unlocked OEM first, then booted into download mode to install system and suddenly disconnected my phone from PC:
"Custom binary blocked by FRP lock"
I have locked OEM now, no recovery access, and there is a soft brick in my smartphone. :crying:
Does anyone know how to fix that issue?
Click to expand...
Click to collapse
I am also experiencing this problem, the solution is to take in a technician or authorized Samsung.
NickDeveloper said:
Guys, I tried to flash TWRP recovery on my A7, build number xxu1asa4.
I unlocked OEM first, then booted into download mode to install system and suddenly disconnected my phone from PC:
"Custom binary blocked by FRP lock"
I have locked OEM now, no recovery access, and there is a soft brick in my smartphone. :crying:
Does anyone know how to fix that issue?
Click to expand...
Click to collapse
You should've not unlocked the OEM, but also disable the FRP Lock. Initiating a factory reset from Settings (which will force you to enter your Samsung Account password) would've done the trick.
To get your Phone running again, reflash Stock ROM and just repeat the process.

Can't open fastboot mode on lenovo K10 note.

I have a lenovo K10 note device n I just unlocked the bootloader to install pixel experience ROM .but I just having a problem to opening the fastboot mode. When I unlocked the bootloader after that the phone is running normally but when I go for installing the twrp recovery the phone is not opening in fastboot mode. I tried volume up + power combination n volume down + power combination also but it boots in stock recovery mode or just it turns on the phone but not going in fastboot mode. Please help how to go in fastboot mode so I can install twrp recovery n pixel experience ROM .
Ricky 44 said:
I have a lenovo K10 note device n I just unlocked the bootloader to install pixel experience ROM .but I just having a problem to opening the fastboot mode. When I unlocked the bootloader after that the phone is running normally but when I go for installing the twrp recovery the phone is not opening in fastboot mode. I tried volume up + power combination n volume down + power combination also but it boots in stock recovery mode or just it turns on the phone but not going in fastboot mode. Please help how to go in fastboot mode so I can install twrp recovery n pixel experience ROM .
Click to expand...
Click to collapse
Hello brother can you please tell me how did you unlocked bootloader of lenovo K10 note ?

Categories

Resources