Related
Hi there
I am still on build NXT - L29C636B193 with June secuirity patch.
I have the dual SIM L29 4gb gold variant. I am in the UK.
Still waiting for Nougat. From reading around it seems that almost everyone has already recieved the official OTA...
I have also seen people manually flashing the OTA but I am worried I may lose my warranty and make certain apps like Android Pay unavailable.
All advice is appreciated
Thanks:laugh:
If you want to have warranty, stay at stock.
There is a major difference between nougat and mm (in look and performance for me). I dont need my warranty because - 1) ive bought it in china , 2) what does warranty cover? if i crash screen - warranty is worthless, if i crash software - i can fix it by myself - so its useless...
I ve swaped soft for european L29C432B320 from DL-00 and i dont care about OTA or some****.
Just flashed, rooted and using as always. For me root is necessary, so warratny is useless anyway.
The only thing is that if something bricks your phone like e.g. melting in pocket (vide SGS Note7 ) there is nothing you can do...
So - for me - just manually flashed nougat and root it and its ok.
Apad121 said:
Hi there
I am still on build NXT - L29C636B193 with June secuirity patch.
I have the dual SIM L29 4gb gold variant. I am in the UK.
Still waiting for Nougat. From reading around it seems that almost everyone has already recieved the official OTA...
I have also seen people manually flashing the OTA but I am worried I may lose my warranty and make certain apps like Android Pay unavailable.
All advice is appreciated
Thanks:laugh:
Click to expand...
Click to collapse
There is a Upate ,but only rollout in Asia,not for Asia Phones in Europe.
Here is the Update,its a German Site
http://www.android-hilfe.de/thema/huawei-mate-8-nougat-nxt-l29c636b521-full-asien.810037/
I was with NXT-L29C432B192 and on 17.01.2017 receive OTA (B560) update via HiCare.
i have a C636 and converted to C432 and i am on B560 works fine
letschky said:
There is a Upate ,but only rollout in Asia,not for Asia Phones in Europe.
Here is the Update,its a German Site
http://www.android-hilfe.de/thema/huawei-mate-8-nougat-nxt-l29c636b521-full-asien.810037/
Click to expand...
Click to collapse
So can I do this without losing warranty or rooting?
Because I want things like Android Pay to still be intact.
Thanks
ronnie72 said:
I was with NXT-L29C432B192 and on 17.01.2017 receive OTA (B560) update via HiCare.
Click to expand...
Click to collapse
Are you in Europe as well?
Because I want to know if my imported Huawei Mate 8 will receive an official OTA from Huawei...
Thanks
I receive the Ota only to the converted C432.
On original C636 no Ota Updates
Can I load the latest update onto the device so that the system update menu will recognise the update?
Maybe use dload or somrthing?
Can someone point me in the right direction?
Thanks
Apad121 said:
Are you in Europe as well?
Because I want to know if my imported Huawei Mate 8 will receive an official OTA from Huawei...
Thanks
Click to expand...
Click to collapse
Yes, Europe. In HiCare i checked Europe/Germany and recive OTA update.
ronnie72 said:
Yes, Europe. In HiCare i checked Europe/Germany and recive OTA update.
Click to expand...
Click to collapse
Hi there
When I contacted the European chat helper in the Hi care app, they said that my model the NXT - L29 will not get OTA updates while i am not in Southeast Asia?
I don't know if this true as it sounds bizarre, most devices are still updated when not in their home land.
What model number is yours?
Thanks
checksum error
Hi there,
the update appears and it starts to download, but most of the time, I get a checksum error. Only 2 times (out of perhaps 8 downloads) it downloaded properly, so far. The device restarted and got stuck at the "Your device got unlocked and can't be trusted." and "The device is now booting" prompt. I let it rest for more than 3 hours, but nothing happened.
So: none of the categories in the poll apply to me: I seem to get the update, but cannot install it.
mwanner said:
Hi there,
the update appears and it starts to download, but most of the time, I get a checksum error. Only 2 times (out of perhaps 8 downloads) it downloaded properly, so far. The device restarted and got stuck at the "Your device got unlocked and can't be trusted." and "The device is now booting" prompt. I let it rest for more than 3 hours, but nothing happened.
So: none of the categories in the poll apply to me: I seem to get the update, but cannot install it.
Click to expand...
Click to collapse
Are you also on the L29?
Which country are you in?
Did you root or unlock the bootloader?
Apad121 said:
Are you also on the L29?
Which country are you in?
Did you root or unlock the bootloader?
Click to expand...
Click to collapse
I finally figured what was wrong: I had a bad (as in not accepted by the system) update in the dload folder of the sdcard. Thus even after flashing TWRP via adb or the stock firmware upgrade, that was tried and denied, first.
Once I removed that folder, I could successfully install TWRP and the latest CM/Lineage build (alpha-4).
To actually answer your questions: Yes, CH, and yes, bootloader unlocked.
563 arrived for L29C636
Sent from my HUAWEI NXT-L29 using Tapatalk
qwerty1q said:
563 arrived for L29C636
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Any link to the files ? Instructions ?
Hi there
On the firmware downloader app, a new update has been launched but it is B330? Emui 4.1?
Take a look below
Apad121 said:
Hi there
I am still on build NXT - L29C636B193 with June secuirity patch.
I have the dual SIM L29 4gb gold variant. I am in the UK.
Still waiting for Nougat. From reading around it seems that almost everyone has already recieved the official OTA...
I have also seen people manually flashing the OTA but I am worried I may lose my warranty and make certain apps like Android Pay unavailable.
All advice is appreciated
Thanks:laugh:
Click to expand...
Click to collapse
I had manually uppdated to B521 and tried to update to B563 trough the Firmware Finder without success.
Then I downgraded to B193, tried update to B563 and failed.
Updated to B211 then and did factory reset. After restart I got new firmware showing in system update in settings.
So I´m guessing it´s official OTA update as I didn´t update through Firmware Finder.
Apad121 said:
Hi there
On the firmware downloader app, a new update has been launched but it is B330? Emui 4.1?
Take a look below
Click to expand...
Click to collapse
I was on L29C185B180, and the 321 update (4.1) just hit my phone on Thursday.
I recieved my OTA update today on from NXT L29636211 to b563 im in the UK with China dual sim international Mate 8 purchased from wonda mobile. Went very smoothly. Now enjoying official Nougat.
Hello everybody,
Firstly, apologies about all text, no links.. But i'm new to the site and don't have enough posts to link yet.
So, i'm new to the Mate 9 (had Samsungs for quite a few years now... Overpriced battery sucking hogs that never last to 18 months withou massive issues) and I really haven't gotten into the custon side of/flashing etc since my original galaxy (dunut, before the s!) /HTC Desire, sgs3 days.... So i'm probably quite out of touch... But still capable to learn and especially follow a good guide!
Now, my thing is... I want to stay stock as I use Android pay quite a lot... Yet with my experience with optus they are ATROCIOUS at updates, every with volume sale items like the Galaxy s4, 5 &6 so I can only imagine that i'll never get an update with the mate 9.
I purchased my phone outright, but second hand.... So I don't think I'll have a warranty anyway.
So far I have gathered that I can only debrand if I unlock the bootloader (and pay remains broken even if it gets relocked with an original rom) so for me, at least for the time being, that's out.
My next option is to side load firmware from the SD card... I just want to keep up to date. There is some screen sensitivity issues that the newest firmware apparently addresses.. Not to mention camera updates and battery usage updates (already VERY impressed with the battery though, especially after my S6- Awful phone)
Trouble is, I can't get any update to complete! - They get to 5% and then fail!
The firmware models I've tried have slightly different numbers to what's on my Optus Mate 9... But I can't find any exact matches, so I'm kind of expecting this to be the cause of my failed updates, even when I've downloaded from the different sites following the guides.
Currently i'm running with this;
Model: MHA-L09
Build: MHA-L09C34B122
EMUI: 5.0
Android: 7.0
and I have tried these three updates from the Huawei... Note 2 full and one OTA. Also note the firmware/region differences... But it's as close as I can find.
2017.04.25 MHA L09BC346B181 FULL-MF
2017.04.25 MHA L09BC346B181 OTA-MF
2017.04.24 MHA L09BC34B170 FULL-MF
I've also followed these two guides (and another one with a B170 update), downloading the updates from each respective site in case the firmware was something different than what I could find. Note also that one tells you to put the dload folder into the device memory.. Which won't work, so I just did it in SD which enables the phone to recognise the update file.
(links not allowed sorry, removed and replaced with text, can probably google to see what I did, always fails on step 1)
From get droid tips, upgrade to B170 & B181
from stechguide, upgrade it B181
Not to mention having followed all the guides I could find on this forum.
I'm sorry if I've missed a discussion that already deals with this (or similar) or if it's really bleedingly obvious. I'm just at a bit of a loss here!
Thanks in advance.
Sorry,
This is for Australian firmware. Optus.
Use this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I don't get why sites write down guides on how to update, when we in fact can't update using DLOAD. Only 2 offline firmwares have been released so far, for C636 and AL00. But that guide up there will let you update to 181.
Thanks for that,
I'd obviously misunderstood what's available already... Figured since I don't have the 10x zoom available like the latest release, I was behind.
ante0 said:
Use this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I don't get why sites write down guides on how to update, when we in fact can't update using DLOAD. Only 2 offline firmwares have been released so far, for C636 and AL00. But that guide up there will let you update to 181.
Click to expand...
Click to collapse
Yes, new users are led the wrong way by reading these guides.
The dload method probably worked with older devices so the Mate 9 articles seem to be created by copy and paste and replacing the older devices name with "Mate 9". Voila! There's your new shiny article about the Mate 9 and people klick it.
Yeah. I got sucked in. Noob mistake.
Sorry for polluting the board with my stupidity!
Very out of touch with behind the scenes android.
Thanks for taking the time guys
Since you don't want to unlock your bootloader you are stuck to only one method. And that is the Firmware Finder method and try to push the latest C34B170 FULL-MF to your System Updater and hope it is authenticated. The other link mentioned by ante0 is for unlocked bootloader users only using TWRP and modified recovery images.
Saw that. Figured I'm just stuck as is for now. I'll check out what you're referring to!
Leighm0 said:
Since you don't want to unlock your bootloader you are stuck to only one method. And that is the Firmware Finder method and try to push the latest C34B170 FULL-MF to your System Updater and hope it is authenticated. The other link mentioned by ante0 is for unlocked bootloader users only using TWRP and modified recovery images.
Click to expand...
Click to collapse
New Mate 9 owner here, have been trying to update from MHA-L29C636B172 to MHA-L29C636B180 using the Firmware Finder method and push to OTA.
System update has picked up the new version but every time I try to download and update, it gets to 100% and then tells me I need to update Package 1 which is the same size, it downloads that, tells me I need to update Package 2, same size, downloads that, Package 3 etc, etc in a never ending loop! I’ve tried using both the smaller update package and the full package. I built up an update file of over 5GB trying to do it this way and it never gets to the authentication stage!
Although I’ve always unlocked my bootloader, flashed custom recoveries and roms on my previous Android devices I’m not keen to take that path yet.
In a nutshell, am I doing something wrong or should I just wait for the official authenticated firmware update to pop up on my phone? Thanks.
Texan1 said:
should I just wait for the official authenticated firmware update to pop up on my phone? Thanks.
Click to expand...
Click to collapse
IMHO yes you should. Don't let FF/FH turn into an obsession, just enjoy your phone.
Sent from my MHA-L29 using XDA Labs
Texan1 said:
New Mate 9 owner here, have been trying to update from MHA-L29C636B172 to MHA-L29C636B180 using the Firmware Finder method and push to OTA.
System update has picked up the new version but every time I try to download and update, it gets to 100% and then tells me I need to update Package 1 which is the same size, it downloads that, tells me I need to update Package 2, same size, downloads that, Package 3 etc, etc in a never ending loop! I’ve tried using both the smaller update package and the full package. I built up an update file of over 5GB trying to do it this way and it never gets to the authentication stage!
Although I’ve always unlocked my bootloader, flashed custom recoveries and roms on my previous Android devices I’m not keen to take that path yet.
In a nutshell, am I doing something wrong or should I just wait for the official authenticated firmware update to pop up on my phone? Thanks.
Click to expand...
Click to collapse
Once you start download.. pause it then go turn off the proxy and then go back to the update and resume. Then you won't get the incremental download loop.
By the way, when you unlock bootloader on mate 9, then flash a full firmware (either the update and rebrand guide, Firmware finder or funky) your bootloader gets locked again. So no real harm done.
Leighm0 said:
Once you start download.. pause it then go turn off the proxy and then go back to the update and resume. Then you won't get the incremental download loop.
Click to expand...
Click to collapse
Thanks @Leighm0, but still getting the 'authentication failed' message once downloaded. Is there anything I can do to prevent that and get the update through?
Texan1 said:
Thanks @Leighm0, but still getting the 'authentication failed' message once downloaded. Is there anything I can do to prevent that and get the update through?
Click to expand...
Click to collapse
Nope, thats Huawei not authenticating the update for your device yet... you just have to wait. Took me about 3-4 weeks from the time of release before B182 got approved for my C636 device.
I just randomly check every week till its finally approved - I try not to keep checking as its pointless and a waste of bandwidth.
Leighm0 said:
Nope, thats Huawei not authenticating the update for your device yet... you just have to wait. Took me about 3-4 weeks from the time of release before B182 got approved for my C636 device.
I just randomly check every week till its finally approved - I try not to keep checking as its pointless and a waste of bandwidth.
Click to expand...
Click to collapse
Thanks @Leighm0. Unsure what the point of Firmware Finder and the proxy is then? If it allows you to find the firmware earlier, but you still can’t install it because Huawei need to authenticate it first, why not just check for updates using the built in system updater?
Good question... Wondering that myself.
Sent from my MHA-L09 using XDA Free mobile app
Texan1 said:
Thanks @Leighm0. Unsure what the point of Firmware Finder and the proxy is then? If it allows you to find the firmware earlier, but you still can’t install it because Huawei need to authenticate it first, why not just check for updates using the built in system updater?
Click to expand...
Click to collapse
Nope - I still had to get FF Proxy to push it to system updater.. just needs to be authenticated by Huawei first. OTA did not show up under the standard "check for updates" options.. it might have shown up, but how long do I need to wait for that ? My device is not available in Australia, would it even get OTA updates if it werent for FF proxy?
Next time a firmware comes out, I could do a test to see if it does even get it by normal methods - and that is to push with FF Proxy, wait for the update to be authorized... then cancel it... turn off FF Proxy and wait for it to show up in my system updater naturally.. see how slow Huawei are at pushing it? Be interesting to see.
The above would probably not be relevant to an Australian sold model/device - it should get OTA updates when they are pushed out..
Leighm0 said:
Nope - I still had to get FF Proxy to push it to system updater.. just needs to be authenticated by Huawei first. OTA did not show up under the standard "check for updates" options.. it might have shown up, but how long do I need to wait for that ? My device is not available in Australia, would it even get OTA updates if it werent for FF proxy?
Next time a firmware comes out, I could do a test to see if it does even get it by normal methods - and that is to push with FF Proxy, wait for the update to be authorized... then cancel it... turn off FF Proxy and wait for it to show up in my system updater naturally.. see how slow Huawei are at pushing it? Be interesting to see.
The above would probably not be relevant to an Australian sold model/device - it should get OTA updates when they are pushed out..
Click to expand...
Click to collapse
Ah, ok, well explained mate. So there is a delay between FF and OTA finding the update and then there is a delay as to when Huawei decide to authenticate it.
Are firmware and when Huawei decide to authenticate based on model number? Geographic regions? Mobile carrier?
Mine was purchased via Hong Kong and is the MHA-L29C636 model which I believe is the version JB HiFi sell as well.
Texan1 said:
Ah, ok, well explained mate. So there is a delay between FF and OTA finding the update and then there is a delay as to when Huawei decide to authenticate it.
Are firmware and when Huawei decide to authenticate based on model number? Geographic regions? Mobile carrier?
Mine was purchased via Hong Kong and is the MHA-L29C636 model which I believe is the version JB HiFi sell as well.
Click to expand...
Click to collapse
Not sure how Huawei do their authentication approvals.. but it's not model number.. as someone with same model as mine got theirs authenticated 3-4 weeks before mine did (they were in different country). Could be region and or mobile carrier.. who knows.
Mine was purchased from Thailand and is the LON-L29C636 but is not sold anywhere here in Australia. Correct your model is indeed sold by JB Hi-fi.. so would think you get yours approved same time as those who bought here in AU from JB. But again this could be wrong and they could base authentication on something else... Maybe serial number groupings or who knows?!?!
Leighm0 said:
Not sure how Huawei do their authentication approvals.. but it's not model number.. as someone with same model as mine got theirs authenticated 3-4 weeks before mine did (they were in different country). Could be region and or mobile carrier.. who knows.
Mine was purchased from Thailand and is the LON-L29C636 but is not sold anywhere here in Australia. Correct your model is indeed sold by JB Hi-fi.. so would think you get yours approved same time as those who bought here in AU from JB. But again this could be wrong and they could base authentication on something else... Maybe serial number groupings or who knows?!?!
Click to expand...
Click to collapse
Iirc they go by IMEI.
Hi all, I updated my phone months ago to sort out a problem in games, and its worked fine. However I never received the update to Android 7 or EMUI 5.0. I used firmware finder to update originally, around 6 months ago.
The update seemed to go fine, and the phone has worked great. Would the original update through firmware finder have somehow caused 'official' updates to have been turned off in some way?
Is there any way to rectify this, as I assume most people with the UK version of this phone already have Android 7 and EMUI 5.0 yeah?
thedandyp said:
The update seemed to go fine, and the phone has worked great. Would the original update through firmware finder have somehow caused 'official' updates to have been turned off in some way?
?
Click to expand...
Click to collapse
If you have updater app in settings amd your phone model shows the correct details(not NRD TEST KEY) you will get update for sure.
If need help let us know we can help
Well this doesn't seem to be the case. From what I can gather most UK handsets should have received the update 3 or 4 months ago. So I think it's pretty safe to assume that my particular handset will not receive an OTA update.
thedandyp said:
Well this doesn't seem to be the case. From what I can gather most UK handsets should have received the update 3 or 4 months ago. So I think it's pretty safe to assume that my particular handset will not receive an OTA update.
Click to expand...
Click to collapse
Can do it manually by flashing the file manually with dload method
Thanks for the reply. I might be forced to doing it manually. But I'd really like to get to the bottom of this, what possible reason would there be for not receiving the update yet? It's been months!
thedandyp said:
Thanks for the reply. I might be forced to doing it manually. But I'd really like to get to the bottom of this, what possible reason would there be for not receiving the update yet? It's been months!
Click to expand...
Click to collapse
Would you believe if i say i haven't got single update for more than on my 5C, full stock MM and was on the factory version for more than year then i gave up and did it myself. I tried all the method of upgrades and downgrades but none helped and even Huawei was not able to identify and push update manually after providing my IMEI. So not sure if you would be able to get the cause here
Hi. I got an Honor 9 through Three in the UK approx 3 months ago. It came unbranded and is currently on C432B100. Has anyone in the UK received any updates since getting their phone via OTA. I have already questioned this through HiCare chat and they have stated that there are some security updates coming soon. I previously had a P9 which never received an update in the 2 years I had it. Live chat also said that the updates are done in batches but i doubt there are that many Honor 9's in the UK to receive updates that warrant it to be put in batches.
Im stuck in the same situation, still on B100 firmware, with, what seems like no hope of any updates, im waiting on official oreo, as from what i have read, huawei already has the correct partitions for project treble, and someone has got oreo treble working on a mate 9, which has the kirin 960, and i think someone else got it booted on an honor 9.
i guess its just a waiting game for now. oreo is in beta, so i expect an official update soon.
Just use the firmware finder app to spoof updates to your device. I used this and am now on B180 working fine.
do the capacative buttons work on B180?
boroleigh said:
do the capacative buttons work on B180?
Click to expand...
Click to collapse
I have no issues with full stock B180.
Thanks. Will give it a go later when I have time.
buchman said:
Just use the firmware finder app to spoof updates to your device. I used this and am now on B180 working fine.
Click to expand...
Click to collapse
Ive got firmware finder installed, and can download the latest firmware, i'm assuming i need to then flash the zip with TWRP, only problem ive got is that I don't have a microSD card.
unless you can perform a 'fake' OTA with the firmware finder app?
It also says that the firmware is not approved for installation when I check access
i've found a B180 firmware on ff and used the in app proxy to install but got an unstable network message after 65% which then reset to 0. Am i doing anything wrong?
This is a bug in firmwarefinder, happens to me also sometimes. also you guys dont need a custom recovery, leave everything stock, bootloader locked and frp and the HWFF update can still be done. When unstable network message occurs for me it always helped to stop the HWFF proxy and restart it, then when everything is downloading well i leave the phone alone till 100%. Then update starts in the same way as OTA directly out of settings menu. No need for recovery, sd cards etc. Only make sure that you get the FULL OTA package and proof your imei first. If its not approved the huawei check wont verify the firmware and the installation will fail (without consequences).
approved firmwares are B120, B150 and B180 as far as i have checked myself. For the other ones i think the best is to install the nocheck_recovery
Hello
You can use also Funky Huawei. However, it is not free. But, it works fine.
Do tools like funkyhuawei and dc-unlocker execute more sophisticated code than you can do yourself?
Hi. Just updated to B180 via FF proxy. Had trouble getting it to download via WiFi so used my mobile data and worked perfectly.
I finally got it to work, successfully on b180 now, don't see why b181 etc.. is listed as they are not approved for install
ambitiousButRubbish said:
I finally got it to work, successfully on b180 now, don't see why b181 etc.. is listed as they are not approved for install
Click to expand...
Click to collapse
It just lists all of the firmwares that are available for the model. There is a seperate check whether they have been approved for install.
I think the proxy in FF is only to trigger the download. I always shut it down straight after the download starts.
Rommco05 said:
I think it is neccesary to change proxy back
Click to expand...
Click to collapse
Ok, I think not.
See demo: https://youtu.be/pt5pWPhcsW4
There's a short pause when you shut it down, but it resumes quickly afterwards on your standard connection.
Of course, there is nothing wrong keeping the proxy on during the download.
An update for people on B100 in the UK. I updated the other week to B180 via FF proxy. I received the OTA for B182 just now and everything working fine. So at least it still receives updates. One further mention, I previously had a p9 before my honor 9 and across almost 3 years this is the first update I have ever received. It makes.you wonder how bothered Huawei are about their phone updates.
boroleigh said:
An update for people on B100 in the UK. I updated the other week to B180 via FF proxy. I received the OTA for B182 just now and everything working fine. So at least it still receives updates. One further mention, I previously had a p9 before my honor 9 and across almost 3 years this is the first update I have ever received. It makes.you wonder how bothered Huawei are about their phone updates.
Click to expand...
Click to collapse
Thanks, UK on B100 as well, didn't realise there had been so many updates. I've just installed FF, can you tell me which version of B180 you selected? Was it the full version or the update?
Cheers
Sent from my STF-L09 using Tapatalk
evolutionisbad said:
Thanks, UK on B100 as well, didn't realise there had been so many updates. I've just installed FF, can you tell me which version of B180 you selected? Was it the full version or the update?
Cheers
Sent from my STF-L09 using Tapatalk
Click to expand...
Click to collapse
Choose full if you have the bandwidth and time to be sure.
fregor said:
Choose full if you have the bandwidth and time to be sure.
Click to expand...
Click to collapse
Thanks, I've started the download of the 3GB update file with the proxy then removed the proxy and it has continued. Downloading over a 4G hotspot so might take a bit of time. Hopefully I'll be updated soon and hopfully Three UK allow VoLTE for this handset.
Cheers
Hello friends. I have a P40 pro. I was using emui 12 beta, but I downgraded it to emui 10 to install gms. After installing GMS, I made all the updates in order (5 total, updates as large as 10 gb), but now 11.0.0.230 appears as the latest version, the emui12 update does not appear in hisuite, do I need to log in to the beta project again?
I joined the beta program through the UK country, checked it using appgallery and system UK, but there are no updates.
How to downgrade from emui 12 beta to emui 10 please?
DevrimSeven60 said:
Hello friends. I have a P40 pro. I was using emui 12 beta, but I downgraded it to emui 10 to install gms. After installing GMS, I made all the updates in order (5 total, updates as large as 10 gb), but now 11.0.0.230 appears as the latest version, the emui12 update does not appear in hisuite, do I need to log in to the beta project again?
I joined the beta program through the UK country, checked it using appgallery and system UK, but there are no updates.
Click to expand...
Click to collapse
Hello, did you solve the problem?
I got stuck on .230 for few months, but last weekend I've changed my SIM card few times (I've used Polish SIM and I immediately got update to .260, then I put giffgaff and i immediately got update to EMUI 12 .218).
Im also stucked for 2 months on .230 version, cant update to 260 or emui, tried everything and even did factory reset but sill no success.
Didnt do sim swap since i only have my sim from bh telecom (bosnia)
Upgrade chart procedures (generally speaking): here.
hm it seems my only option is to use hisuite proxy, can you explain me how to use it
camill007 said:
hm it seems my only option is to use hisuite proxy, can you explain me how to use it
Click to expand...
Click to collapse
There is no 260 or EMUi12 firmware available on HiSuite Proxy or DLOAD method, yet.
i put out sim out then in couple of times but still no results, there is no way i can get to sim from other countries sadly
camill007 said:
i put out sim out then in couple of times but still no results, there is no way i can get to sim from other countries sadly
Click to expand...
Click to collapse
Try to change region country. Who knows?
badmania98 said:
Try to change region country. Who knows?
Click to expand...
Click to collapse
i tried changing region in support app then in system setting but nothing so far
Omarfop said:
How to downgrade from emui 12 beta to emui 10 please?
Click to expand...
Click to collapse
did you solve it