This just a simple little thing for people that want to fix the GIANT/BLOWN UP resolution when connected to a display (TV or Monitor etc.) there is an app for that lol it's called secondscreen
(https://play.google.com/store/apps/details?id=com.farmerbb.secondscreen.free)
You can change the resolution to whatever you want for your connected display and then revert back to the phones screen resolution when you disconnect pretty much automatically. Change the dpi to around ~180 when your connected display is on also as there is a tablet like ui that looks better imo.
Activate desktop mode in secondscreen for Chrome to have it on for a better internet experience. If you don't use chrome then just turn it on in the settings of the browser of your choice (firefox for example).
All in all, playing/viewing and doing pretty much anything is alot better now I have to say personally. Try it and tell me what you think.
Related
Is there any way (via app/driver) to increase the display resolution for a docked g-tablet?
It looks like the hardware can drive much higher resolutons: tegradeveloper.nvidia.com/tegra/forum/does-tegra-250-support-2-deferent-video-output-hdmi-and-vga-same-time
I see the Motorola Atrix has an app that does this trick when docked in their "laptop" dock. It would be real slick to do this with my docking unit - I would probably never go back to a laptop or desktop again, except for remote control from my tablet.
TIA
It wouldn't make sense for a device to push more pixels than the actual LCD is capable of.
I don't care about the display on the tablet when it is docked and hooked to an external monitor - that could be turned off. What matters is the external display and how crappy 1024x600 looks on a 19" 16:9 monitor made to display 1440x900.
Our HDMI out is 1080p. 1080x1920
What are you hooked up to when getting higher resolution? Does the tablet display just turn off and external takes over?
Everything I have hooked my dock up to (4:3 and 16:9 19" monitors and 720p TV) gets the same resolution as my tablet display. So the bigger the display the more jagged the experience.
Thanks
i havent tested my hdmi output (waiting for straight cable) but the specs are there.
since max resolution on the gtab is 1024x600, thats what youl see, but through the cord the (720p, 1080p) resolution should show on the HD TV.
Hi Resolution when you use the YouTube.apk
stumppc said:
Is there any way (via app/driver) to increase the display resolution for a docked g-tablet?
It looks like the hardware can drive much higher resolutons: tegradeveloper.nvidia.com/tegra/forum/does-tegra-250-support-2-deferent-video-output-hdmi-and-vga-same-time
I see the Motorola Atrix has an app that does this trick when docked in their "laptop" dock. It would be real slick to do this with my docking unit - I would probably never go back to a laptop or desktop again, except for remote control from my tablet.
TIA
Click to expand...
Click to collapse
I was able to get HD (1080p) using the YouTube.APK by selecting HD mode in the application setting. Both the Tablet and the external screen played 1080p videos quite nicely. If you turned off the Tablet display, the external screen also went blank. When I quit out of the APK and set the Tablet to sleep, the HDMI setting appeared to stick in the main Tablet settings. There is no easy way to set the Gtablet resolution using the standard stock settings.
After a few days and trying different TV streaming APKs from the Market. The HDMI Out stopped working altogether. I did a reboot as well as Flash the ROM but the HDMI OUT still does not display. It does recognize the HDMI signal (the LCD shows 1080P) from the dock HDMI port. I am not sure what happened but some how one or more default settings are stuck in the user data configuration file. One of those settings makes my SHARP external display go blank (can't display the set mode). The GTablet continues to display in both 420P and HD (probably 720P) modes.
I will try a data wipe and Flash again to see if it clears the HDMI setting back to the default mode (I believe that is 420p).
If this is the case, then we need some type of HDMI.apk that allows one to set the screen mode to Tablet only, Tablet & External or External only AND set the resolution mode for each. When watching using the dock and an external LCD, I want the default to be 1080p.
So, far when tricking the Gtablet to display 1080p I have some how broken the dock and have not been able to reset back to factory settings.
Any suggestions and/or configuration apk's to resolve this problem?
EKS
Hi Resolution when you use the YouTube.apk
stumppc said:
Is there any way (via app/driver) to increase the display resolution for a docked g-tablet?
It looks like the hardware can drive much higher resolutons: tegradeveloper.nvidia.com/tegra/forum/does-tegra-250-support-2-deferent-video-output-hdmi-and-vga-same-time
I see the Motorola Atrix has an app that does this trick when docked in their "laptop" dock. It would be real slick to do this with my docking unit - I would probably never go back to a laptop or desktop again, except for remote control from my tablet.
TIA
Click to expand...
Click to collapse
I was able to get HD (1080p) using the YouTube.APK by selecting HD mode in the application setting. Both the Tablet and the external screen played 1080p videos quite nicely. If you turned off the Tablet display, the external screen also went blank. When I quit out of the APK and set the Tablet to sleep, the HDMI setting appeared to stick in the main Tablet settings. There is no easy way to tell in the standard GTablet setting function.
After a few days and trying different TV streaming APKs from the Market. The HDMI Out stopped working. I did a reboot as well as Flash the ROM but the HDMI OUT still does not display. It does recognize the HDMI signal (the LCD shows 1080P) from the dock HDMI port. I am not sure what happened but some how one or more default settings are stick in the configuration file. I will try a data wipe and Flash again to see if it clears the HDMI setting back to the default mode (I believe that is 420p).
If this is the case, then we need some type of HDMI.apk that allows one to set the screen mode to Tablet only, Tablet & External or External only AND set the resolution mode for each. When watching using the dock and an external LCD, I want the default to be 1080p.
So, far when tricking the Gtablet to display 1080p I have some how broken the dock and have not been able to reset back to factory settings.
Any suggestions and/or configuration apk's to resolve this problem?
EDIT: Fixed the HDMI Display by using new cable. I get really nice HD output using the YouTube.APK with the settings set to HD.
EKS
OK I was going through settings like I occasionally do since I sometimes find something interesting and I did today under the screen settings and the mode selection.
There are three settings:
Dynamic
Standard
Movie
The default I'm pretty sure (since I can't remember after messing with it) was standard. I'm curious as to what dynamic is. Movie seems fairly obvious to me since it adds a slight yellow hue to the screen. Dynamic seems to brighten colors it seems but why is it referred to as dynamic.
I haven't seen the screen adjust itself or anything upon using it either.
Check this thread:
http://forum.xda-developers.com/showthread.php?t=1229470
From what I've observed, dynamic gives out brighter and better colors at the expense of battery life. Standard is pretty much "standard". Then movie mode uses the least battery and would not strain your eyes as compared to the other two.
Ah thank you for that!
Running on official 4.4.2 firmware.
I found that the screen display is way too dark, very unacceptable. This is very obvious for video playback from every software, e.g. youtube, mxplayer, xbmc, etc.
As I share same hdmi port on my tv with other 5 devices, it is not convenient to adjust tv display back and forth between other 5 devices and this dark-display tv box.
My box is rooted. Is there any way to adjust its gamma, black level, etc. Tried several brightness adjustment apps from store and did not help.
MiniX Forums had a thread covering this, without much of a complete solution. Since they changed their domain to minixforum, the thread either has a different URL or is lost, but google cache exists of the original - http://webcache.googleusercontent.c...reen-too-dark.3631/+&cd=2&hl=en&ct=clnk&gl=uk
Short version is try changing HDMI range on your TV from limited to full. It may help other people to reply if you mention which Android apps you've tried to use (which presumably were adjusting backlight levels on a phone/tablet, rather than the video signal data being sent by your box. As an example, although advertised as only compatible for a couple of Nexus devices, have you tried https://play.google.com/store/apps/details?id=com.teamkang.fauxdisplay&hl=en ? How about https://play.google.com/store/apps/details?id=com.netmanslab.sa&hl=en ?
Thanks a lot for your comprehensive reply.
My LG TV don't have an option for Full-range RGB; however, it has several Picture modes for me to choose. I usually use one of the Picture mode (say, Standard Picture mode) which I already tweaked/calibrated for best display quality.
Some other picture mode on my TV allows me to choose Gamma (high, medium, low), brightness adjustment, and Dark Level (high, low). I tried adjusting those options in combination under another Picture mode and, though not perfect, it gave me a better result.
So when I view other sources (Dune, Appletv, digital tv, satellite tv), I choose the Standard Picture mode; when switching my hdmi selector to this Android box, I have to choose the other Picture mode on my TV. This is good enough for now.
The Screen Adjuster app won't help. I've not tried The Advanced Color&Gamma Control paid app.
Anyway, Android tV box should have gamma/brightness/contrast/sharpness control under its Setting.
Update: tried Advanced Color&Gamma Control app, it allows me to adjust rgb only, no gamma adjustment.
have any of you found a way to quick swap your display resolutions? I'm curious because I find myself switching from 1080 to 1440p and vice versa in different situations, like when my phone's on the charger and when my phone's not near a charger. Any ideas would be nice!
Also unrelated to the topic ( I don't want to make a new one)
My previous phone on Verizon (Galaxy Note 5) was able to send and receive MMS while connected to Wifi. Why is it that the Galaxy S8+ can't? and how do I set it up so that it can?
You can change the Performance Mode to High Performance, there's a quick-view setting in the notification drawer. That changes your display to QHD. Just switch back to Optimized when you want to go back to FHD (and you can change the optimized settings to go to 720 as well).
Has anyone checked this out closely.
I don't sense much better fluidity with Adapted Motion and FHD.
JUST ME?
I think it is just you.....
Set display to 120hz adaptive, load up a big web page or an app which has some scrolling room. Scroll up and down notice how fluid it is.
Then change display to regular standard 60hz and switch back to that web page or app and scroll up and down.
You will notice the difference.
Personally now I don't think I can go back to a 60hz panel on a phone.....