Database Info

[ROM][PORT][5.1.1][MT6582] CM12.1 BETA 4 for GIONEE P3 - team TMT

TEAM TMT BRINGS TO YOU, THE THIRD [3RD ALREADY!] CM12.1 ROM FOR GIONEE PIONEER P3
:cyclops: CM12.1 :cyclops:​
Source: [thanks a lot, really, a lot, guys ] http://forum.xda-developers.com/android/development/mt6582-cyanogen-12-1-beta-4-gionee-m2-t3184164
:good: :good: :good: :good: :good: :good: :good: :good: :good: :good: :good:
Let see what do we have here:
Original CM12.1
with Yureka [CyanogenOS] Theme Engine
More optimized than others LP
Dual SIM
... and ROOT [as usual ]
The moment of truth
(I mean what is working :V)
Dual SIM Data
Cyanogenmod Original Features
Flashlight, Sensor, GPS,...
...and SD Card as Default
But sometimes, truth hurts :crying: :crying:
(What is not working, huh?)
WIFI Hotspot
USSD [something should be wrote in here, but I think everyone knows it ]
Internal Storage not showing on PC [phone does, screenshots proved]
FM Radio [traditionalist doesn't like this]
Can't use Google Voice Recognition
SKNIL DAOLNWOD : https://drive.google.com/file/d/0B_D58JmxUZ92OUZSVVVFR2M2U0k/view?usp=sharing
GApps: added, no need to flash. YAY!
INSTRUCTIONS TO FLASH THIS ROM
Reflash firmware with Flashtool but change recovery directory to TWRP (otherwise, you will lose your recovery! LOSE RECOVERY...!)
Backup IMEI by anyway [MobileUncle or NVRam TOOL]
Wipe cache, Dalvik cache, data, system
Flash the ROM
Flash GApps
Restore IMEI
REBOOT ------------------------------------------> ENJOY
Hit thanks if you find this helpful to encourage us - team TMT
ROM OS Version: 5.1.x Marshmallow, just kidding, Lollipop
ROM Kernel: 3.4.x.y.z :V
CM Version: 12.1 UNOFFICIAL
PS: This time's BONUS GIFTS will be Lollipop Xposed: Flash Xposed zip [http://bit.ly/1RvvTxK] through TWRP, reboot, then install Xposed apk [http://bit.ly/1HYZpY9] and Modules [GravityBox,... ], launch Xposed, tick all Modules, then Reboot by Xposed. You are done

[ROM][PORT][ Lollipop 5.0]- [2.1] FunTouch OS 2.1 Beta3- Ulefone Be Touch 2

[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2
​​This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D
*************** Please take a Backup before proceeding ***********************​!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
KEY FEATURES OF ROM
• Smooth and Good looking
• New UI with new features
• Smooth Touch , Fast . Battery Saver
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan @aidasaidas75 @skyinfo @Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only @ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features
• Chinese and English Language only.
• All Bloatware removed
• Antutu Score 45000+
• Music Player and Sound improved
​
Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me.
​INSTRUCTIONS:
1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not ::laugh:​GAPPS INSTRUCTIONS:
Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APK​L-Speed Installation:
1. Download L_SPEED_V3.2_OVERSEER_arm and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Dalvik cache partition and swipe
You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5​DOWNLOADS
ROM
https://mega.nz/#!rJglDQbL!WkKMhXDeWa_mu8ZnV0alV23toua-hAksFaaWfHkM5ew
GAPPS
https://mega.nz/#!XBpAzRiS!Ozj59WvF...Bqw4lswfpR6Rsga6xH_pnswIflEgkBfiSIzI[/CENTER]​

awesome
Thanks for a new rom for the device. The rom download is in progress, but the gapps requires a password to decrypt.. Hopefully someone can help assist with the finger print scanner as im sure the rom would be perfect. I enjoy your other ports and thats the only thing lacking in them all. Cheers !:good:

dr3adl0ckd said:
Thanks for a new rom for the device. The rom download is in progress, but the gapps requires a password to decrypt.. Hopefully someone can help assist with the finger print scanner as im sure the rom would be perfect. I enjoy your other ports and thats the only thing lacking in them all. Cheers !:good:
Click to expand...
Click to collapse
Thanks Mate ..links updated again

shanky76 said:
Thanks Mate ..links updated again
Click to expand...
Click to collapse
np. sir You do great work, i barely seen your reply but found the gapps was gonna go and update here and the other site you post too as well as i wasn't sure when you would get back on. I work for a web hosting company using linux servers and what not. Not sure if it would work like this but since its a port, is it possible to use the "working directory" for the finger printer scanner from say maybe the elephone p7000 port rom for the ulefone to your rom's finger print "working directory" since it does indeed work on that rom as it has the same hardware as our device? I tried google searches to see where that information is placed in the rom system directory but could not find anything.
best regards,

dr3adl0ckd said:
np. sir You do great work, i barely seen your reply but found the gapps was gonna go and update here and the other site you post too as well as i wasn't sure when you would get back on. I work for a web hosting company using linux servers and what not. Not sure if it would work like this but since its a port, is it possible to use the "working directory" for the finger printer scanner from say maybe the elephone p7000 port rom for the ulefone to your rom's finger print "working directory" since it does indeed work on that rom as it has the same hardware as our device? I tried google searches to see where that information is placed in the rom system directory but could not find anything.
best regards,
Click to expand...
Click to collapse
There are number of changes required . I can send you the changes if you like ...
boot .img .. decompile make the changes for Finger print sensors.
ETc, Lib , Bin , App these are the places where we need to make changes ... not getting enough time to do all these ..I will try once festive season is over in india

Tutorial with video
I want upgrade vivo x3s , but i cant... give me tutorial with video ... because im newbie.
Thsnks......

Sir i'm new in flashing roms and stuff, i have a 4.4.4 Kitkat phone that doesn't have lolipop update, how do i make this my ROM?

how do we download marshmallow for vivo x5pro? the links that are provided they promted you to fill a survey, but when you click on it says error. havent been able to find a way to download the roms for vivo x5 pro. any help please?

shanky76 said:
[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2
​​This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D
*************** Please take a Backup before proceeding ***********************​!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
KEY FEATURES OF ROM
• Smooth and Good looking
• New UI with new features
• Smooth Touch , Fast . Battery Saver
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan @aidasaidas75 @skyinfo @Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only @ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features
• Chinese and English Language only.
• All Bloatware removed
• Antutu Score 45000+
• Music Player and Sound improved
​
Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me.
​INSTRUCTIONS:
1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not ::laugh:​GAPPS INSTRUCTIONS:
Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APK​L-Speed Installation:
1. Download L_SPEED_V3.2_OVERSEER_arm and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Dalvik cache partition and swipe
You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5​DOWNLOADS
ROM
https://mega.nz/#!rJglDQbL!WkKMhXDeWa_mu8ZnV0alV23toua-hAksFaaWfHkM5ew
GAPPS
https://mega.nz/#!XBpAzRiS!Ozj59WvF... someone port this Funtouch OS to HTC one m7?​
Click to expand...
Click to collapse

Can I install this on my vivo y28 ?

My phone SM-J110h How support ViVO rom

kernel version ??

[ROM][PORT] Flyme Os 4.5.3.2R (Meizu) For Gionee P3 [MT6582] [5.0.2]

TEAM TMT​
THE NEXT LOLLIPOP CM12.1 BASED ROM FOR GIONEE PIONEER P3​
MEIZU FLYME OS​
ROM Features
-Android 5.0.2
-Better Battery Performance
-Smoother
What's new in this build?
Well, since last Remastered Edition build new additions are made.
Added most of Meizu Apps (20+ apps), no removal of MzApps
Music is now working flawless no lags in playback.
Most of the Components are translated to English language, except few apps.
MTP and other USB functionality is fixed
Storage is set to SD Card as default
New build is with dat compression.
Earphone are functional properly
GPS tracker works fine
APN pre included
What Working
All...
Not Work
Hotpots
USSD (Maybe)
FM Radio
DOWNLOAD LINK
Mod Edit: Links removed
>>Gapps 5.0.x Pico Open<<
Credit
Xolo Q2500 Porters
HNote1W Porters
Gionne P3 Port Me
How to Swap For All Roms Ram 4.2+
Extract
must Root
First on Busy Box Pro
Wait finished choose install
to root explorer
System / etc /
create folders named init.d
copy 2 files to set right Swap300_cache Swap300_system vs 777
finished in Universal Cantilever select Activate current Donethen select Verify = >> done Succes
Reboot finished
Pro checks to see Swap Diskinfo below oke
if Copy faild
SuperSU = > settings = > shortcut link name , reboot Done
Link Tools ( decompression is not Flash )
https://drive.google.com/file/d/0B_8...ew?usp=sharing

GUIDE FLASH FLYME OS
TWRP 2.8.5.0
https://drive.google.com/file/d/0B_8qtSxtaHI7eHFiTkJGa2FwZWs/view
Mount Uncheck System
Uncheck Reboot now
Finish
reboot system
Waiting...
Go to TWRP flash Gapps
reboot
Done

Tran Tien said:
GUIDE FLASH FLYME OS
TWRP 2.8.5.0
https://drive.google.com/file/d/0B_8qtSxtaHI7eHFiTkJGa2FwZWs/view
Mount Uncheck System
Uncheck Reboot now
Finish
reboot system
Waiting...
Go to TWRP flash Gapps
reboot
Done
Click to expand...
Click to collapse
Bro please can you guide me how to port flyme os to another device!!

Thanks for the rom but i think you are mistaken the type of rom.This rom is "not" at all based on cm12.1,its a real LP rom ported from various Miezu devices.

Mr.Ak said:
Thanks for the rom but i think you are mistaken the type of rom.This rom is "not" at all based on cm12.1,its a real LP rom ported from various Miezu devices.
Click to expand...
Click to collapse
Taken on CM12 background , things like Meizu AZ 99 % , no mod

Tran Tien said:
Taken on CM12 background , things like Meizu AZ 99 % , no mod
Click to expand...
Click to collapse
Looks like you still didnt get it,You wrote the Android Version 5.0.2 and on paper you are also saying its based on cm12.1,but cm12.1 is actually 5.1.1..So you downgraded or what?

Swap ram error
Unable to copy both files, what to do?
Sent from my P3 using XDA Free mobile app

Thread closed for not complying with GPL.

Unofficial CM12.1 LOLLIPOP 5.1.1 For Micromax A190 And Walton Primo Rx2 (mt6591/92)

MEERY CHRISTMAS ALL.....ENJOY THE ROM.....FINALLY BUGLESS CM12.1
ROM RELEASE DATE :24 DECEMBER 2015
#google_drive_link
#First Bugless lollipop rom For Micromax A190 and Walton Primo RX2
Top Feature
ITS REAL CM12.1
Android version:5.1.
CM12 theme engine
YOU CAN USE CM12.1 THEMES FROM GOOGLE PLAY STORE
DUAL SIM
13 MP BACK CAMERA ON 3RD PARTY CAMERA APPS
ALL ANDROID LOLLIPOP FEATURES
VERY GOOD BATTERY BACKUP
VERY GOOD CAMERA QUALITY LIKE(/BETTER) THAN STOCK ROM
ROM SIZE:286MB & GOOGLE DRIVE LINK
Changes From Previous Versions (nov build )
IN CALL MIC ISSUE FIXED
USSD WORKING FULLY
FM RADIO WORKING WELL IN HEADPHONE
NO LAG DURING 1080P PLAYBACK
GOOD AUDIO QUALITY
1080P/FULL HD RECORDING
GPS WORKING
WHATS WORKING?
EVERYTHING..
(please do check if VPN is working ..if not comment for fix)
PROCEDURE TO INSTALL/FLASH (MUST FOLLOW EVEN IF YOU KNOW)
COPY "CM12.1 FINAL BUGLESS For A190 and RX2-4.zip" TO SD CARD
REBOOT TO RECOVERY BY PRESSING VOLUME UP + POWER KEY (OR VIA REBOOT RECOVERY OPTION)
BACKUP CURRENT OS FROM RECOVERY (OPTIONAL,BUT RECOMMENDED)
WIPE FACTORY RESET,WIPE DALVIK CACHE
CLICK INSTALL,AND SELECT THE DOWNLOADED ROM FILE
WAIT SOME TIME
NOW INSTALL/FLASH GAPPS ZIP(FOR GOOGLE APPS LIKE PLAY STORE ETC)
AFTER THAT FOR ROOTING THE CURRENT ROM ,FLASH SUPERUSER.ZIP NOTE: YOU DON'T NEED TO REBOOT BETWEEN 5,7,8 STEPS
REBOOT ...
ROM LINK AND MORE INFO : Mod Edit: link removed.
IF YOU LIKE THIS ROM ,HIT THE THANKS BUTTON
CREDITS:
fire855 for Building for MTK
Aniruddha Adhikary for ussd
Himura Rudyanto
JetRay (me) for making it for a190/rx2

bluetooth
Jet ray said:
MEERY CHRISTMAS ALL.....ENJOY THE ROM.....FINALLY BUGLESS CM12.1
ROM RELEASE DATE :24 DECEMBER 2015
#google_drive_link
#First Bugless lollipop rom For Micromax A190 and Walton Primo RX2
Top Feature
ITS REAL CM12.1
Android version:5.1.
CM12 theme engine
YOU CAN USE CM12.1 THEMES FROM GOOGLE PLAY STORE
DUAL SIM
13 MP BACK CAMERA ON 3RD PARTY CAMERA APPS
ALL ANDROID LOLLIPOP FEATURES
VERY GOOD BATTERY BACKUP
VERY GOOD CAMERA QUALITY LIKE(/BETTER) THAN STOCK ROM
ROM SIZE:286MB & GOOGLE DRIVE LINK
Changes From Previous Versions (nov build )
IN CALL MIC ISSUE FIXED
USSD WORKING FULLY
FM RADIO WORKING WELL IN HEADPHONE
NO LAG DURING 1080P PLAYBACK
GOOD AUDIO QUALITY
1080P/FULL HD RECORDING
GPS WORKING
WHATS WORKING?
EVERYTHING..
(please do check if VPN is working ..if not comment for fix)
PROCEDURE TO INSTALL/FLASH (MUST FOLLOW EVEN IF YOU KNOW)
COPY "CM12.1 FINAL BUGLESS For A190 and RX2-4.zip" TO SD CARD
REBOOT TO RECOVERY BY PRESSING VOLUME UP + POWER KEY (OR VIA REBOOT RECOVERY OPTION)
BACKUP CURRENT OS FROM RECOVERY (OPTIONAL,BUT RECOMMENDED)
WIPE FACTORY RESET,WIPE DALVIK CACHE
CLICK INSTALL,AND SELECT THE DOWNLOADED ROM FILE
WAIT SOME TIME
NOW INSTALL/FLASH GAPPS ZIP(FOR GOOGLE APPS LIKE PLAY STORE ETC)
AFTER THAT FOR ROOTING THE CURRENT ROM ,FLASH SUPERUSER.ZIP NOTE: YOU DON'T NEED TO REBOOT BETWEEN 5,7,8 STEPS
REBOOT ...
ROM LINK AND MORE INFO : Mod Edit: link removed.
IF YOU LIKE THIS ROM ,HIT THE THANKS BUTTON
CREDITS:
fire855 for Building for MTK
Aniruddha Adhikary for ussd
Himura Rudyanto
JetRay (me) for making it for a190/rx2
Click to expand...
Click to collapse
is the bluetooth working?

[ROM][6.0.1][STABLE] Marshmallow Based Resurrection Remix For A6000/A6000+

[size=+4]••• Credits ••• [/size]​
Stuep dec ,Pinggit Wahyu Nugroho , Budiyono
Thanks to @mshoaib7 for fixing proximity sensor issue.
Presenting you the stable marshmallow based Resurrection Remix V5.6.0 .
This is a stable marshmallow for our Lenovo A6000/A6000+ .
Don't ask me that is this working or that working . I am Just Gonna say "EVERYTHING IS WORKING" . I have personally flashed it on my phone.
[size=+2]HighLights ••• [/size]​
• 64 Bit
• Pre Rooted
• Xposed Working (Not PreInstalled)
• No Bugs (I didn't noticed any bug )
• Gapps are working (I flashed Pico version .No signin problem)
Bugs :•• Proximity Sensor Not working .Screen dont turn off while calling .(fixed)
Fb & Messenger Force Closing ( Use Facebook Lite - The best Alternative)
Screenshots •See attachments
[size=+2]How To Flash ••• [/size]​
••IT IS RECOMMENDED TO MAKE A BACKUP OF CURRENT ROM , I AM NOT RESPONSIBLE IF SOMETHING WEIRED HAPPENS TO YOUR LOVING SMARTPHONE DUE TO YOUR NOOBNESS AND LAZYNESS. ••
1. Download The ROM from Below.
2.Reboot To Recovery (Recommended TWRP by Jav, you can try with other)
3.Wipe dalvik,cache,data,system.
4. Now locate the ROM zip file and slide bottom bar to flash.
5. Flash Gapps (if you want - Arm64 • 6.0 • Nano/Pico/Micro/Bla Bla Bla...)
6.flash rr560_proximity_fix.zip .
5. Reboot . Done .Enjoy
[size=+2]Download ••• [/size]​ From Here
rr560_proximity_fix.zip From Here
Other Info ••
ROM OS Version: 6.0.1r3 Marshmallow
ROM Kernel: Linux 3.4.49
Based On:CyanogenMod 13.0
Resurrection Remix•• Source Code
Kernel source:https://github.com/lenovo-Kraft-T/android_kernel_lenovo_msm8916/tree/cm-13.0
Device Tree: https://github.com/lenovo-Kraft-T/android_device_lenovo_msm8916
Thanks to FlourMo for kernel Sources.

Thanks for sharing......................
-Sourav_8434

Great work and thanks for sharing

not booting properly after apps optimization phones goes soft reboot and the same apps optimization process will goes again....and again...and again

i have installed this rom but unable to update binary for supersu when i want to update via recovery it always restart in stock recovery so help me to update binary
---------- Post added at 01:21 PM ---------- Previous post was at 12:41 PM ----------
facebook and messenger always crash
flash in app drawer not working but camara flash working and it showing green colour circular stip in right side of screen

Apoorv_def19 said:
not booting properly after apps optimization phones goes soft reboot and the same apps optimization process will goes again....and again...and again
Click to expand...
Click to collapse
some workaround
1. Flash over stock lollipop.
2. Use TWRP by JAV Team
3. Follow steps clearly as mentioned in thread .
4. Try to boot without Gapps .( I used Pico ,it may not boot sometime when we flash mini & full Gapps)

krishna526 said:
i have installed this rom but unable to update binary for supersu when i want to update via recovery it always restart in stock recovery so help me to update binary
---------- Post added at 01:21 PM ---------- Previous post was at 12:41 PM ----------
facebook and messenger always crash
flash in app drawer not working but camara flash working and it showing green colour circular stip in right side of screen
Click to expand...
Click to collapse
Why you updating binary . SuperSU is already flashed while flashing ROM . You didn't need to update SuperSU binary . ...
If you want to update SuperSU than grab latest recovery flashable SuperSU from somehere and flash it by booting into recovery . that's it.
I don't know about flash issue . But that green color is showing because you enabled some feature in it like gesture or something . You can search on Google to fix fb and messenger issues.

Can I, like, flash this over CM 12.1 by ED300?

coolakshansh said:
Can I, like, flash this over CM 12.1 by ED300?
Click to expand...
Click to collapse
Try it . .. . it may work... But if it didn't then first flash stock ROM then This ROM . use TWRP by JaV

shivdroid said:
some workaround
1. Flash over stock lollipop.
2. Use TWRP by JAV Team
3. Follow steps clearly as mentioned in thread .
4. Try to boot without Gapps .( I used Pico ,it may not boot sometime when we flash mini & full Gapps)
Click to expand...
Click to collapse
Bro i did without gapps and its boot properly but when i used pico or micro...then its not

Apoorv_def19 said:
Bro i did without gapps and its boot properly but when i used pico or micro...then its not
Click to expand...
Click to collapse
I used Pico gapps and It booted properly without any problem.
Don't flash higher Gapps .I can't help you much in this case . This ROM is ported from other device.
Here is screenshot Of
1. ROM zip and Nano gapps Zip
2. Google Account setup after booting into Resurrection Remix.

after GAapps flash it show unfortunately setup wijirt has stop
I also flash pico,nano micro

Apoorv_def19 said:
Bro i did without gapps and its boot properly but when i used pico or micro...then its not
Click to expand...
Click to collapse
You have flash gapps right after flashing the rom....flash the rom then gapps, reboot only after that...that is cm13 bug, older build still have those bugs...its not the rom...

Hi. Thanx for the ROM. Is there any chance of further development of this ROM or is it just single port and then it's over?

i have flashed the rom and almost every things work fine except flash light
and after flashing the rom battery draning issue after 100% just browsing for 15-20 min battery level go to about 70% and in stand by mode also battey drain so fast if i charge to 100% and left it unused and wi fi is on in night time then in morning after abut 8h battery level go to below 20% so any one can suggest me how to control it. As i think marsmallow provide great battery backup but in my case it just goes opposite
so help me if any one
Proximity sensor not working properly during call screen do not turn off and also some time during call screen do not wake up after several time pressing the power key
I like to listen radio but in this ROM no FM radio

krishna526 said:
i have flashed the rom and almost every things work fine except flash light
and after flashing the rom battery draning issue after 100% just browsing for 15-20 min battery level go to about 70% and in stand by mode also battey drain so fast if i charge to 100% and left it unused and wi fi is on in night time then in morning after abut 8h battery level go to below 20% so any one can suggest me how to control it. As i think marsmallow provide great battery backup but in my case it just goes opposite
so help me if any one
Proximity sensor not working properly during call screen do not turn off and also some time during call screen do not wake up after several time pressing the power key
I like to listen radio but in this ROM no FM radio
Click to expand...
Click to collapse
USE ANOTHER ROM IF U THINK ITS CAUSING TOO MUCH TROUBLE..... I am not using this rom because I can't login to my Google account due to account security issues . (Google think my device is stolen and someone is trying to login from same device with another account). Otherwise it was working fine . This ROM is ported from Other device due to which it maybe causing little problem.... If I using this rom , I can live with that.

You've ported this rom include [port] in the title.

It is a very good,smooth rom for a6000
Here's a small clip:
https://youtu.be/bpyzbm0eNTk
All headphones,features work well
Sent from my Lenovo A6000s using XDA-Developers mobile app

kanwaljeetsm said:
It is a very good,smooth rom for a6000
Here's a small clip:
https://youtu.be/bpyzbm0eNTk
All headphones,features work well
Sent from my Lenovo A6000s using XDA-Developers mobile app
Click to expand...
Click to collapse
Are you been able to sign in to google apps completely?
I was facing problem where I cannot sync my contacts.
*Edit* : PROBLEM SOLVED

kanwaljeetsm said:
It is a very good,smooth rom for a6000
Here's a small clip:
https://youtu.be/bpyzbm0eNTk
All headphones,features work well
Sent from my Lenovo A6000s using XDA-Developers mobile app
Click to expand...
Click to collapse
yes rom is working fine i am using a6000 plus proximity sensor not working during call and all the cpu core working at same time so any custom kernal then this problem may be solved and this rom is battery hunger. it comsume too much battery and no option for fm radio
---------- Post added at 01:28 PM ---------- Previous post was at 01:18 PM ----------
shivdroid said:
[size=+4]••• Credits ••• [/size]​
Stuep dec ,Pinggit Wahyu Nugroho , Budiyono
Presenting you the stable marshmallow based Resurrection Remix V5.6.0 .
This is a stable marshmallow for our Lenovo A6000/A6000+ .
Don't ask me that is this working or that working . I am Just Gonna say "EVERYTHING IS WORKING" . I have personally flashed it on my phone.
[size=+2]HighLights ••• [/size]​
• 64 Bit
• Pre Rooted
• Xposed Working (Not PreInstalled)
• No Bugs (I didn't noticed any bug )
• Gapps are working (I flashed Pico version .No signin problem)
Screenshots •See attachments
[size=+2]How To Flash ••• [/size]​
••IT IS RECOMMENDED TO MAKE A BACKUP OF CURRENT ROM , I AM NOT RESPONSIBLE IF SOMETHING WEIRED HAPPENS TO YOUR LOVING SMARTPHONE DUE TO YOUR NOOBNESS AND LAZYNESS. ••
1. Download The ROM from Below.
2.Reboot To Recovery (Recommended TWRP by Jav, you can try with other)
3.Wipe dalvik,cache,data,system.
4. Now locate the ROM zip file and slide bottom bar to flash.
6. Flash Gapps (if you want - Arm64 • 6.0 • Nano/Pico/Micro/Bla Bla Bla...)
5. Reboot . Done .Enjoy
[size=+2]Download ••• [/size]​ From Here
Other Info ••
ROM OS Version: 6.0.1r3 Marshmallow
ROM Kernel: Linux 3.4.49
Based On:CyanogenMod 13.0
Resurrection Remix•• Source Code
Kernel source:https://github.com/lenovo-Kraft-T/android_kernel_lenovo_msm8916/tree/cm-13.0
Device Tree: https://github.com/lenovo-Kraft-T/android_device_lenovo_msm8916
Thanks to FlourMo for kernel Sources.
Click to expand...
Click to collapse
from where u find the source of this rom