steps to decrypt firmware and storage on moto E5 play XT1920 - 19 pettyl - Moto E5 Guides, News, & Discussion

first we need to have the correct firmware of the device in case something goes wrong to reinstall again
second step
as you already have the previously installed recovery you must enter the recovery and give it delete to clear cache, delete software and delete internal storage and restart it no matter that it says it has no operating system the device will be in bootlogo or simply restart in the own recovery TWRP at that time that really does not have software the device we put it in bootloader mode.
third step reinstall the correct firmware of the device through ADB with the following commands that appear below
fastboot devices
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash boot boot.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
let it restart the software, and once restarted you turn it off again and leave it in bootloader mode you install the twrp right away.
at that precise moment you enter the recovery you configure it and you will notice that already the internal storage is visible and there is no problem of encryption you can restart the software and ready problem solved.

me funciono pero ahora se me queda en el logo de motorola :'''v

Lautii 18 said:
me funciono pero ahora se me queda en el logo de motorola :'''v
Click to expand...
Click to collapse
Bueno amigo tienes que limpiar el sistema como si estuviera restableciendo lo de fabrica a través de recovery si no te funciona reinstalar nuevamente el recovery a veces el recovery da error y no deja arrancar el software

Hello, it does not work for me on a motorcycle e5 play xt1920-18 when I give a deletion system or any other partition it gives me an error and there is nothing you can possibly help me thanks.
Hola, no me funciona en moto e5 play xt1920-18 cuando doy sistema de borrado o cualquier otra partición me da error y no hay nada quiza puedas ayudarme gracias.

telegram... @motoe5dev ...... @Pettyl

juanito1987_9 said:
telegram... @motoe5dev ...... @Pettyl
Click to expand...
Click to collapse
Pode me arrumar ?

is there any solution for this on moto e5 plus. i had a pattern lock and my os crashed and now when i try to inter my storage from recovery it says my data is encrypted and both my internal and sd card isn't showing. now i can't even install new rom. is there any solution?

Related

[XT1640/XT1641/XT1642/XT1643] Moto G4 Plus NPJ25.93-14 mFASTBOOT + Relock Bootloader

Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.
Guys,
[XT1640/XT1641/XT1642/XT1643] Moto G4 Plus NPJ25.93-14 7.0 Nougat Full Stock ROM available for Moto G4 Plus
Moderator Edit:
FileFactory links are NOT PERMITTED on XDA due to their clickbait nature. - Deleted.
Ready to Flash Zip is Here includes mfastboot + Relock Batchfile
Mirror
https://mega.nz/#!fJMAnJya!spGmbDiCJmllxohx2PzX1oH-D7mSIfKViNyl-7-P3vk
I tried with my XT1643 Indian variant and it works, and RElocked my Bootloader as well
[Bootloader Locking Script]
mfastboot oem lock begin
mfastboot oem lock begin
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
pause
mfastboot reboot
mfastboot relock script here
https://mega.nz/#!eJc0BQ6Y!Zh5UxYTzpWAfE9ReCtJS9hguSpjH5Ooh6VYVm38eQd8
[Thank me..! if you think i'd helped you]
Mega mirror is up
thanks for this now custom roms support volte in sim 2
Sent from my Moto G4 Plus using XDA-Developers Legacy app
What's the point in relocking the bootloader? Moto already got your approval for cancelling your warranty (and that information it is stored on their servers) when you requested the unlock code!
PS: If you are based in EU, where it is illegal to cancel a warranty for this reason, the warranty is not affected anyway by unlocking the bootloader.
Olaaaame podrían ayudar con mi moto g4 plus XT1641 NpJ25.93-14.7 nivel de parche 1 de septiembre 2017 kiero te er acceso root pero no se como hacerle por favor ayuda

Firmware oficial 9.0.0 Pie (Instalacion)

Hello everyone, I present you how to install Android Pie 9.0.0 stock on your device Moto Z3 Play, remember to follow the indications any doubt write it in the comments please.:
Requirements:
- You can do both with the bootloader blocked and unlocked
- Have ADB and Fastboot installed: https://forum.xda-developers.com/showthread.php?t=2317790
- Have Motorola drivers installed
- Download official Pie 9.0.0 firmware: https://forum.xda-developers.com/z3-play/how-to/android-9-0-pie-rolling-brazil-t3900061/page5 Pag. 5 Post #45
BECKHAM_PPW29.131_27_1_subsidy_DEFAULT_regulatory_ DEFAULT_CFC.xml
credits to the user @tb110188 for uploading Onedrive
Process:
- Place the device in Bootloader mode connecting the device to the PC waiting for a few seconds to recognize it. After downloading the firmware we will have a folder where in the command console enter:
adb devices
Then adb reboot bootloader which will put the device in bootloader mode
- Enter the command:
fastboot devices to verify that it is recognized by the PC.
then the following:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot reboot
When entering this last command the device will reboot and show us the initial screen of Android Pie 9.0.0
Notes:
- These commands can be omitted to avoid having problems with the telephone signal (it is unlikely to happen but it is good to prevent)
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
- - This command will erase what is stored in the internal memory of the device, if you want to keep your data omit it
fastboot erase userdata
There's na even easier way to do that, using the Lenovo Moto Smart Assistant to Update the device...
Please elaborate!
I am about to receive my Z3Play and I cannot remember how I upgraded my Z2Play to Oreo but I recall I was using some Motorola software.
Sent from my Moto Z2 Play using Tapatalk
Model
Vegeta. said:
Hello everyone, I present you how to install Android Pie 9.0.0 stock on your device Moto Z3 Play, remember to follow the indications any doubt write it in the comments please.:
Requirements:
- Bootloader unlocked
- Have ADB and Fastboot installed: https://forum.xda-developers.com/showthread.php?t=2317790
- Have Motorola drivers installed
- Download official Pie 9.0.0 firmware: https://forum.xda-developers.com/z3-play/how-to/android-9-0-pie-rolling-brazil-t3900061/page5 Pag. 5 Post #45
BECKHAM_PPW29.131_27_1_subsidy_DEFAULT_regulatory_ DEFAULT_CFC.xml
credits to the user @tb110188 for uploading Onedrive
Process:
- Place the device in Bootloader mode connecting the device to the PC waiting for a few seconds to recognize it. After downloading the firmware we will have a folder where in the command console enter:
adb devices
Then adb reboot bootloader which will put the device in bootloader mode
- Enter the command:
fastboot devices to verify that it is recognized by the PC.
then the following:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot reboot
When entering this last command the device will reboot and show us the initial screen of Android Pie 9.0.0
Notes:
- These commands can be omitted to avoid having problems with the telephone signal (it is unlikely to happen but it is good to prevent)
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
- - This command will erase what is stored in the internal memory of the device, if you want to keep your data omit it
fastboot erase userdata
Click to expand...
Click to collapse
Can it be installed in XT1929-6 with motorola assistant? I'm from Mexico and the OTA don't arrive
dreamerbl said:
Can it be installed in XT1929-6 with motorola assistant? I'm from Mexico and the OTA don't arrive
Click to expand...
Click to collapse
Yes, I installed today and everything works fine. Just follow the instructions.
Si, lo instalé hoy y todo funciona bien, solo sigue las instrucciones. En mi caso no tuve que desbloquear el bootloader.
Worked perfectly on 2 XT1929-8. Thanks!
SonoranEZR said:
Yes, I installed today and everything works fine. Just follow the instructions.
Si, lo instalé hoy y todo funciona bien, solo sigue las instrucciones. En mi caso no tuve que desbloquear el bootloader.
Click to expand...
Click to collapse
¿You're from México? I could use a little help bro. Thank you anyway :fingers-crossed:
dreamerbl said:
¿You're from México? I could use a little help bro. Thank you anyway :fingers-crossed:
Click to expand...
Click to collapse
Yes. I am from Mexico.
As for the instructions, follow them how they are, I omitted these commands:
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
(Apparently this is to avoid signal loss according to the post, just in case .)
fastboot erase userdata
(This avoids having to reconfigure your Moto Z3 Play.)
This command gave me an error:
fastboot erase DDR
(invalid partition name DDR) but didn't cause problems with the installation or the use of my phone, I do not know if it is specific to my Moto Z3 Play.
Once the firmware files were extracted, I put these commands:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot bluetooth flash BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase cache
fastboot erase DDR
fastboot reboot
and that's it!.
I cant install it in mexico z3 play
SonoranEZR said:
Yes. I am from Mexico.
As for the instructions, follow them how they are, I omitted these commands:
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
(Apparently this is to avoid signal loss according to the post, just in case .)
fastboot erase userdata
(This avoids having to reconfigure your Moto Z3 Play.)
This command gave me an error:
fastboot erase DDR
(invalid partition name DDR) but didn't cause problems with the installation or the use of my phone, I do not know if it is specific to my Moto Z3 Play.
Once the firmware files were extracted, I put these commands:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot bluetooth flash BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase cache
fastboot erase DDR
fastboot reboot
and that's it!.
Click to expand...
Click to collapse
i've made the same commands as you but i got some errors
D:\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>fastboot flash bluetooth BTFM.bin
(bootloader) is-logical:bluetooth__a: not found
Sending 'bluetooth__a' (4564 KB) OKAY [ 0.100s]
Writing 'bluetooth__a' (bootloader) Invalid partition name bluetooth__a
FAILED (remote: '')
fastboot: error: Command failed
D:\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>fastboot flash dsp dspso.bin
(bootloader) is-logical:dsp__a: not found
Sending 'dsp__a' (16384 KB) OKAY [ 0.380s]
Writing 'dsp__a' (bootloader) Invalid partition name dsp__a
FAILED (remote: '')
fastboot: error: Command fail
any help?
estoy atorado con unos comandos, me dio estos errores (arriba mencionados), ayudaaa porfa
tacochan said:
i've made the same commands as you but i got some errors
D:\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>fastboot flash bluetooth BTFM.bin
(bootloader) is-logical:bluetooth__a: not found
Sending 'bluetooth__a' (4564 KB) OKAY [ 0.100s]
Writing 'bluetooth__a' (bootloader) Invalid partition name bluetooth__a
FAILED (remote: '')
fastboot: error: Command failed
D:\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>fastboot flash dsp dspso.bin
(bootloader) is-logical:dsp__a: not found
Sending 'dsp__a' (16384 KB) OKAY [ 0.380s]
Writing 'dsp__a' (bootloader) Invalid partition name dsp__a
FAILED (remote: '')
fastboot: error: Command fail
any help?
estoy atorado con unos comandos, me dio estos errores (arriba mencionados), ayudaaa porfa
Click to expand...
Click to collapse
Que firmware descargaste? El OPWS28.70_47_8?
tacochan said:
i've made the same commands as you but i got some errors
D:\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>fastboot flash bluetooth BTFM.bin
(bootloader) is-logical:bluetooth__a: not found
Sending 'bluetooth__a' (4564 KB) OKAY [ 0.100s]
Writing 'bluetooth__a' (bootloader) Invalid partition name bluetooth__a
FAILED (remote: '')
fastboot: error: Command failed
D:\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>fastboot flash dsp dspso.bin
(bootloader) is-logical:dsp__a: not found
Sending 'dsp__a' (16384 KB) OKAY [ 0.380s]
Writing 'dsp__a' (bootloader) Invalid partition name dsp__a
FAILED (remote: '')
fastboot: error: Command fail
any help?
estoy atorado con unos comandos, me dio estos errores (arriba mencionados), ayudaaa porfa
Click to expand...
Click to collapse
Why you flashed, or tried to, the Oreo one??? Also is not safe trying to flash a ROM from another revice, even if it's basically the same sans few OEM modifications...
---------- Post added at 08:34 PM ---------- Previous post was at 08:32 PM ----------
SonoranEZR said:
Que firmware descargaste? El OPWS28.70_47_8?
Click to expand...
Click to collapse
Assuming you have the XP1929-5 RETBE, the pie firmware would be BECKHAM_PPW29.131_27_1_subsidy_DEFAULT_regulatory_ DEFAULT_CFC.xml...
tb110188 said:
Why you flashed, or tried to, the Oreo one??? Also is not safe trying to flash a ROM from another revice, even if it's basically the same sans few OEM modifications...
---------- Post added at 08:34 PM ---------- Previous post was at 08:32 PM ----------
Assuming you have the XP1929-5 RETBE, the pie firmware would be BECKHAM_PPW29.131_27_1_subsidy_DEFAULT_regulatory_ DEFAULT_CFC.xml...
Click to expand...
Click to collapse
That is what I am seeing. It is supposed to be upgrade to PPW29.131-27-1.
This firmware works well in my XT-1929-6 (AT&T MX).
SonoranEZR said:
That is what I am seeing. It is supposed to be upgrade to PPW29.131-27-1.
This firmware works well in my XT-1929-6 (AT&T MX).
Click to expand...
Click to collapse
I just don't recommend using ROMs from another places/retails/vendors/etc in your device.... We still don't know what can go wrong as there's barelly any time to test things...
imei
How do you recover imei zerado from the z3 play bike?
I can confirm that it works for European version.
Sent from my Moto Z3 Play using Tapatalk
Already upgraded 3 european Z³ Plays with this and works perfectly on all of them. Didn't lose the IMEI. Just removed those lines that flashes the modem and NON-HLOS.
Vegeta. said:
Hello everyone, I present you how to install Android Pie 9.0.0 stock on your device Moto Z3 Play, remember to follow the indications any doubt write it in the comments please.:
Requirements:
- You can do both with the bootloader blocked and unlocked
- Have ADB and Fastboot installed: https://forum.xda-developers.com/showthread.php?t=2317790
- Have Motorola drivers installed
- Download official Pie 9.0.0 firmware: https://forum.xda-developers.com/z3-play/how-to/android-9-0-pie-rolling-brazil-t3900061/page5 Pag. 5 Post #45
BECKHAM_PPW29.131_27_1_subsidy_DEFAULT_regulatory_ DEFAULT_CFC.xml
credits to the user @tb110188 for uploading Onedrive
Process:
- Place the device in Bootloader mode connecting the device to the PC waiting for a few seconds to recognize it. After downloading the firmware we will have a folder where in the command console enter:
adb devices
Then adb reboot bootloader which will put the device in bootloader mode
- Enter the command:
fastboot devices to verify that it is recognized by the PC.
then the following:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot reboot
When entering this last command the device will reboot and show us the initial screen of Android Pie 9.0.0
Notes:
- These commands can be omitted to avoid having problems with the telephone signal (it is unlikely to happen but it is good to prevent)
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
- - This command will erase what is stored in the internal memory of the device, if you want to keep your data omit it
fastboot erase userdata
Click to expand...
Click to collapse
Thank you, I installed Oreo on my Z3 from Germany but I'm in Egypt, it went smooth.
Sent from my [device_name] using XDA-Developers Legacy app
I really wanna do this but I don't know how to backup if anything goes sideways.
My build is clean, no twrp or anything. What should I do first?
iventura said:
I really wanna do this but I don't know how to backup if anything goes sideways.
My build is clean, no twrp or anything. What should I do first?
Click to expand...
Click to collapse
You can backup everything from the main storage to the SD card.
Sent from my [device_name] using XDA-Developers Legacy app
tb110188 said:
Why you flashed, or tried to, the Oreo one??? Also is not safe trying to flash a ROM from another revice, even if it's basically the same sans few OEM modifications...
---------- Post added at 08:34 PM ---------- Previous post was at 08:32 PM ----------
Assuming you have the XP1929-5 RETBE, the pie firmware would be BECKHAM_PPW29.131_27_1_subsidy_DEFAULT_regulatory_ DEFAULT_CFC.xml...
Click to expand...
Click to collapse
tacochan said:
i've made the same commands as you but i got some errors
D:\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>fastboot flash bluetooth BTFM.bin
(bootloader) is-logical:bluetooth__a: not found
Sending 'bluetooth__a' (4564 KB) OKAY [ 0.100s]
Writing 'bluetooth__a' (bootloader) Invalid partition name bluetooth__a
FAILED (remote: '')
fastboot: error: Command failed
D:\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory\BECKHAM_OPWS28.70_47_8_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>fastboot flash dsp dspso.bin
(bootloader) is-logical:dsp__a: not found
Sending 'dsp__a' (16384 KB) OKAY [ 0.380s]
Writing 'dsp__a' (bootloader) Invalid partition name dsp__a
FAILED (remote: '')
fastboot: error: Command fail
any help?
estoy atorado con unos comandos, me dio estos errores (arriba mencionados), ayudaaa porfa
Click to expand...
Click to collapse
Hi, i have found the souloution. You must set right slot:
fastboot --set-active=a
All partitions has only suffix _a but not __a, you can check it using adb shell:
ls -l /dev/block/platform/soc/c0c4000.sdhci/by-name/
total 0
lrwxrwxrwx 1 root root 21 1970-10-07 08:44 abl_a -> /dev/block/mmcblk0p13
lrwxrwxrwx 1 root root 21 1970-10-07 08:44 abl_b -> /dev/block/mmcblk0p14
lrwxrwxrwx 1 root root 21 1970-10-07 08:44 apdp -> /dev/block/mmcblk0p50
lrwxrwxrwx 1 root root 21 1970-10-07 08:44 bluetooth_a -> /dev/block/mmcblk0p54
lrwxrwxrwx 1 root root 21 1970-10-07 08:44 bluetooth_b -> /dev/block/mmcblk0p55
. . . . . and next
[[email protected] Beckhem_9]$ fastboot --set-active=a
Setting current slot to 'a' OKAY [ 0.139s]
Finished. Total time: 0.139s
. . . . .
[[email protected] Beckhem_9]$ fastboot flash bluetooth BTFM.bin
Sending 'bluetooth_a' (400 KB) OKAY [ 0.002s]
Writing 'bluetooth_a' OKAY [ 0.013s]
Finished. Total time: 0.016s
[[email protected] Beckhem_9]$ fastboot flash dsp dspso.bin
Sending 'dsp_a' (16384 KB) OKAY [ 0.057s]
Writing 'dsp_a' OKAY [ 0.117s]
Finished. Total time: 0.175s
. . . . . and next
. . . . . and last change
fastboot erase ddr # not DDR
Erasing 'ddr' OKAY [ 0.067s]
Finished. Total time: 0.068s

Recover G8Plus - Fastboot only / Without starting system / error 0xC222457

Symptoms:
- Your device is corrupt. It can't be trusted and will not boot.
- Error 0xC222457
- Locked Bootloader
- fastboot oem unlock XXXXXXXX" show "Check 'OEM unlocking' in Android Settings> Developer Options" and "FAILED <remote failure>"
- No flash system / Denied
Most common cause:
- Root and lock the bootloader (can be caused by using .Bat with 'fastboot oem lock')
-Any wrong system installation after unlocking and locking the bootloader with the wrong system
Solution:
- Download Motorola drivers (adb)
- Download Latest ROM (or the same one on your 'fastboot getvar all')
- Download Minimal Adb Fastboot.
Patience when transferring commands if servicefile.xml to cmd commands
Xt2019-2 Retail commands
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vbmeta vbmeta.img
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
Now get to work.
1 - With the phone on fastboot, run the command "fastboot boot boot.img"
1.1 The system will start, skip everything, without internet, We want speed
1.2Go to settings, about, Activate developer mode, and unlock the OEM
2 Now it's easier, if you have a Motorola account, leave the phone on fastboot
2.1 Motorola has its method of unlocking the bootloader, if you do not have an account create on the Motorola website and research about unlocking. (fastboot oem unlock UNIQUE_KEY)
3 Flash the official system and if you want to Lock (fastboot oem lock)
4 Soon.
"I hurried, I will detail everything in the future with a more detailed step by step. "
Jukmisael said:
Symptoms:
- Your device is corrupt. It can't be trusted and will not boot.
- Error 0xC222457
- Locked Bootloader
- fastboot oem unlock XXXXXXXX" show "Check 'OEM unlocking' in Android Settings> Developer Options" and "FAILED <remote failure>"
- No flash system / Denied
Most common cause:
- Root and lock the bootloader (can be caused by using .Bat with 'fastboot oem lock')
-Any wrong system installation after unlocking and locking the bootloader with the wrong system
Solution:
- Download Motorola drivers (adb)
- Download Latest ROM (or the same one on your 'fastboot getvar all')
- Download Minimal Adb Fastboot.
Patience when transferring commands if servicefile.xml to cmd commands
Xt2019-2 Retail commands
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
partição flash fastboot gpt.bin
fastboot flash bootloader bootloader.img
modem fastboot flash NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
logotipo do fastboot flash logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
sistema flash fastboot system.img_sparsechunk.0
sistema flash fastboot system.img_sparsechunk.1
sistema flash fastboot system.img_sparsechunk.2
sistema flash fastboot system.img_sparsechunk.3
sistema flash fastboot system.img_sparsechunk.4
sistema flash fastboot system.img_sparsechunk.5
fastboot flash system_b system_b.img_sparsechunk.0
flash de inicialização rápida system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vbmeta vbmeta.img
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
Agora mãos à obra.
1 - Com o telefone em fastboot, execute o comando "fastboot boot boot.img"
1.1 O sistema vai iniciar, pular tudo, sem internet, Queremos velocidade
1.2 Vá para as configurações, sobre, ative o modo de desenvolvedor e desbloqueie o OEM
2 Agora é mais fácil, se você tiver uma conta da Motorola, deixe o telefone no fastboot
2.1 A Motorola tem seu método de desbloquear o bootloader, caso você não tenha uma conta, crie no site da Motorola e pesquise sobre desbloqueio. (fastboot oem destravar UNIQUE_KEY)
3 Atualize o sistema oficial e se quiser travar (fastboot oem lock)
4 em breve.
“Me apressei, vou detalhar tudo no futuro com um passo a passo mais detalhado”.
[/CITAR]
Friend I have a moto g8 plus with error 0xC2224571, I was unfortunate to give a wrong command via fastboot and blocking his bootlooader, I have tried many things and nothing has any suggestions? I bought another device because of that
Click to expand...
Click to collapse
What I said was my experience, and that's how I managed to recover my device, try this tutorial.If it doesn't work out, I really don't know what to do to help you

Procedura Root

Buongiorno ho effettuato la procedura descritta nel video su un MOTOROLA ONE MACRO XT2016-1 con bootloader sboccato ma eseguendo il comando fastboot flash boot boot.img mi viene visualizzato il seguente messaggio: C:\adb2>fastboot flash boot boot.img target reported max download size of 268435456 bytes sending 'boot' (32768 KB)... OKAY [ 1.302s] writing 'boot'... (bootloader) Invalid partition name boot FAILED (remote failure) finished. total time: 1.314s Qualcuno mi potrebbe aiutare a risolvere tale problema per effettuare il root. Tengo a precisare che non mi è possibile nemmeno installare una recovery TWRP in quanto non esiste per il mio device. Grazie
Amaranto1914 said:
Buongiorno ho effettuato la procedura descritta nel video su un MOTOROLA ONE MACRO XT2016-1 con bootloader sboccato ma eseguendo il comando fastboot flash boot boot.img mi viene visualizzato il seguente messaggio: C:\adb2>fastboot flash boot boot.img target reported max download size of 268435456 bytes sending 'boot' (32768 KB)... OKAY [ 1.302s] writing 'boot'... (bootloader) Invalid partition name boot FAILED (remote failure) finished. total time: 1.314s Qualcuno mi potrebbe aiutare a risolvere tale problema per effettuare il root. Tengo a precisare che non mi è possibile nemmeno installare una recovery TWRP in quanto non esiste per il mio device. Grazie
Click to expand...
Click to collapse
you should not flash the boot img nor the recovery image, you shoud boot fron recovery using fastboot boot "path to trpimg.img "
once in recovery you can flash any twr zip file.

[9.0]-PIE-Stock rom [payton]- moto x4 - ERRO DE MAC, WIFI AND MOBILE DATA - FLASH NO ERASE MODEM

MOD EDIT: ENGLISH TRANSLATION ADDED
This is the last update of the x4 bike they're making available because when I needed it I realized that no one had it, so how I got it here, this is for those with hard-bricks. soft-brick, among other errors that the device has no wi-fi, no known signal the chip this rom will clear any doubts I will be answering in the comments
DISCLAIMER
I cannot be held responsible for any damage that occurs to your device during this process. You are responsible for any transmission notice (if) to your device during this process.
DESCRIPTION
Android Pie retail ROM (version number PAYTON_PPW29.69_40_4) for Moto X4
REQUIREMENTS
Make sure your device is over 80% charged.
We recommend creating a backup of all your important files before starting this process.
HOW TO INSTALL STOCK ROM ON MOTO X4:
Rom https://drive.google.com/file/d/121Tq7BzLsYGsn_PNmKTtD-jeppZZyM3D/view?usp=sharing
Install Motorola driver and ADB Fastboot on your PC.
Now extra firmware from stock in ADB Fastboot folder.
Turn off the device and boot into the bootloader press the volume down button + the power button.
Connect your device to the PC via a USB cable.
open from Adb Fastboot, and paste the commands below or run flash-all.bat
------------------------------------------------------------------------
Esta é a última atualização da moto x4 que está disponibilizando porque quando eu precisoi percebi que ninguém tinha, então como eu consegui aqui, isso é para aqueles com hard-brick. soft-brick, entre outros erros que o aparelho fica sem wi-fi, nenhum sinal conhecido o chip esta rom vai tirar qualquer duvida estarei respondendo nos comentários
ISENÇÃO DE RESPONSABILIDADE
Não posso ser responsabilizado por quaisquer danos que ocorram ao seu dispositivo durante este processo. Você é responsável por qualquer aviso de transmissão (se) ao seu dispositivo durante este processo.
DESCRIÇÃO
ROM de varejo do Android Pie (número da versão PAYTON_PPW29.69_40_4) para Moto X4
REQUISITOS
Certifique-se de que seu dispositivo está carregado acima de 80%.
Recomendamos criar um backup de todos os seus arquivos importantes antes de iniciar este processo.
COMO INSTALAR STOCK ROM NO MOTO X4:
Rom https://drive.google.com/file/d/121Tq7BzLsYGsn_PNmKTtD-jeppZZyM3D/view?usp=sharing
Instale o driver da Motorola e o ADB Fastboot em seu PC.
Agora extra firmware de estoque na pasta ADB Fastboot.
Desligue o dispositivo e inicialize no bootloader pressiona o botão de diminuir o volume + o botão liga / desliga.
Conecte seu dispositivo ao PC por meio de um cabo USB.
abra do Adb Fastboot, e cole os comandos abaixo ou execute o flash-all.bat
[CÓDIGO]
fastboot devices
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader_a bootloader.img
fastboot flash bootloader_b bootloader.img
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot flash fsg_b fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot flash dsp_a dspso.bin
fastboot flash dsp_b dspso.bin
fastboot flash logo logo.bin
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
new links ?
Can you please provide .qcn file backup of Moto x4

Categories

Resources