Lineage 16 for J7 nxt core on youtube - Samsung Galaxy J7 NXT ( J701F Core NXT Exynos 7870

Hello friends
i found lineage 16 for J7 nxt core on youtube
i tried it and it works good
here is the site ...
https://youtu.be/PjNxnBeHnzA

Thanks bro ??

that's very good thanks bro

Eror 7 help model j701f/ ds

dimarudnya said:
Eror 7 help model j701f/ ds
Click to expand...
Click to collapse
Itried it on j701f and there was not errors ..

Hello what you twrp, give a link. I have 3.2.1 for 8.1. Worth the message firmware . Describe the steps how to install in detail. Excuse me for my bad English. With respect !

dimarudnya said:
Hello what you twrp, give a link. I have 3.2.1 for 8.1. Worth the message firmware . Describe the steps how to install in detail. Excuse me for my bad English. With respect !
Click to expand...
Click to collapse
No problem , my English bad too
I have the same TWRP version 3.2.1.0
I rebooted to recovery , Wipe >> formatted data and factory reset
after that installed the rom and Gapps .. that's all

I rooted it by magisk ..
first installed magisk manager then rebooted and flashed magisk zip file from recovery ..
it worked

uhm does anyone here also encounter "internal problem on device" every reboot?

Yes

me too ..

UdayHawash said:
I rooted it by magisk ..
first installed magisk manager then rebooted and flashed magisk zip file from recovery ..
it worked
Click to expand...
Click to collapse
Now can any body know how to fix low mic volume when recording videos ?

saund
You need to change the sound files to your own from the drain in the lib / hw folder

leosanzpr said:
You need to change the sound files to your own from the drain in the lib / hw folder
Click to expand...
Click to collapse
How can i do this ?

you need to open the zip firmware, replace the files and reinstall the firmware or fix it, put it in recovery

leosanzpr said:
you need to open the zip firmware, replace the files and reinstall the firmware or fix it, put it in recovery
Click to expand...
Click to collapse
Thank you , but where can i find the fix files
Which i have to replace ?

I can't disable ambient display
Help please, it's turn on when my cellphone is in my pocket!

patch files must be taken from the firmware, in which the sound works well

porting firmware is done this way, by replacing files with ones that work well or from a drain

may you leave me the link
where is the link guys please

Related

CM 12.1 for lenovo a536

post is removed As developer's asked so but no worry he himself will post his work
developer cyandrew
contact him for more information about rom
its not installing
DiteshJ said:
its not installing
Click to expand...
Click to collapse
please explain detail.... I will try to solve your problem
Cm12.1 beta v7
It gives erorr while installing in twrp recovery
Please say to me how to install this rom plz
Thanx
Zizo22222 said:
It gives erorr while installing in twrp recovery
Please say to me how to install this rom plz
Thanx
Click to expand...
Click to collapse
which package
1- Download cm 12.1 (6 stable) or
2- Download see 12.1 (7v2 revised) or
3- download cm 12.1 unofficial final stable or
In cm12.1 v7 revised it gives erorr and says update failed
Zizo22222 said:
In cm12.1 v7 revised it gives erorr and says update failed
Click to expand...
Click to collapse
use new now..
rejul said:
use new now..
Click to expand...
Click to collapse
How to install it plz and i have to install v2 or v3
Zizo22222 said:
How to install it plz and i have to install v2 or v3
Click to expand...
Click to collapse
v3 is the latest
The rom isnt working and says update failed while installing in recovery
do i need to wipe the system to? on twrp?
Zizo22222 said:
What is the way to install it
Plz
And thank you very much for the new version
Click to expand...
Click to collapse
important:*make backup of your current rom before installing new custom rom
Download the firmware and put it in the root of the SD-card
- Go to the recovery, to make Wipe Data, Cache, and Dalvik Cache (additionally u can wipe system if any error came across)
-Find firmware and install it
- Wait for it to complete nstall
- Restart
kimijayr said:
do i need to wipe the system to? on twrp?
Click to expand...
Click to collapse
actually it better to wipe system to give a clean install
I am interested to use this rom (since Lenovo isn't going to update it to 5.X), but can you tell me what works and what doesn't? If camera, video recording and video playback works, then I will have no absolute problem to use it. I just need your confirmation.
This is cyandrew (Mel Andrew), the one who ported this ROM. Please turn down this post. Do not mirror links. Ask for my permission if you are going to post it elsewhere. You can go to our facebook group and check my ported ROMs there.
JohnSmith743 said:
I am interested to use this rom (since Lenovo isn't going to update it to 5.X), but can you tell me what works and what doesn't? If camera, video recording and video playback works, then I will have no absolute problem to use it. I just need your confirmation.
Click to expand...
Click to collapse
i already posted the changelog... most of the bugs are fixed
gps has some issue
rejul said:
actually it better to wipe system to give a clean install
Click to expand...
Click to collapse
ty
rejul said:
i already posted the changelog... most of the bugs are fixed
gps has some issue
Click to expand...
Click to collapse
So I know this needs a recovery menu to install the rom, like ClockWork Mod. But I need your help, how can I install it?
JohnSmith743 said:
So I know this needs a recovery menu to install the rom, like ClockWork Mod. But I need your help, how can I install it?
Click to expand...
Click to collapse
at first you need custom recovery for lenovo a536 (twrp,cwm,philiz..)
use sp flash tool to install custom recovery(here is the tutorial)
after installing custom recovery
switch off phone ,take battery out for a minute then put it back,
press volume up+volume down+power button together until recovery shows
in recovery clear data,cache,
then select install from sd card then navigate to root folder where you put ur rom zip file and then flash it(press power button to select)
wait to install ur rom...finish
rejul said:
at first you need custom recovery for lenovo a536 (twrp,cwm,philiz..)
use sp flash tool to install custom recovery(here is the tutorial)
after installing custom recovery
switch off phone ,take battery out for a minute then put it back,
press volume up+volume down+power button together until recovery shows
in recovery clear data,cache,
then select install from sd card then navigate to root folder where you put ur rom zip file and then flash it(press power button to select)
wait to install ur rom...finish
Click to expand...
Click to collapse
Does it matter if I have the latest official firmware? I mean the cwm recovery file that I have has the name of an older version of the firmware.

[Simple Guide] Rooting Oppo F1 Plus X9009

Hello, this is simple guide to root Oppo F1 Plus. No need to unlock bootloader :fingers-crossed:
This method worked and tested :highfive:
Yes i know there's another guide in this forum but it only link to youtube video tutorial.
First, download this update.zip and then copy it to your device (internal or MicroSD is allright, up to you)
*You can download file update.zip via attachment below
1. Go to recovery mode. Turn off your F1 Plus, wait for a second and then turn it on again with Power + Volume Down
2. Select language (english of course ahh is up to you)
3. Choose Install from storage and select update.zip
4. Wait the process (below 1 minute) and when it done just reboot system
5. Finishing updating and then check in your app drawer SuperSu should appear
6. Update SuperSU binary if needed
7. Done
will this work with the F1f version of the phone?
chooky536 said:
will this work with the F1f version of the phone?
Click to expand...
Click to collapse
There are instructions in a guide in this very section of this forum.
Works like a charm. Having recently purchased the phone I didn't want to root it. But after I realized that Oppo released the May firmware (around 1.3 GB) on their website. Everything works as it should. I'm hoping for an official forum with more stuff.
A question, what theme are you using with the default launcher?
Ron1209 said:
Works like a charm. Having recently purchased the phone I didn't want to root it. But after I realized that Oppo released the May firmware (around 1.3 GB) on their website. Everything works as it should. I'm hoping for an official forum with more stuff.
A question, what theme are you using with the default launcher?
Click to expand...
Click to collapse
Lucid launcher with darkonis icon theme
Can you confirm if Xposed is working with stock recovery? If working please specify the version
Ron1209 said:
Can you confirm if Xposed is working with stock recovery? If working please specify the version
Click to expand...
Click to collapse
I tried flashing Xposed with stock recovery.
Install failed.
Is it still working?
Danusyakti said:
Lucid launcher with darkonis icon theme
Click to expand...
Click to collapse
Have u tried flashfire to flash xposed?
kazuya_gonzalez said:
Have u tried flashfire to flash xposed?
Click to expand...
Click to collapse
What is FlashFire? I'm new to this, I had a Samsung S3 earlier so CWM was the king. Also, I get notifications for software updates but it just won't download. Even after unrooting and factory reset.
Ron1209 said:
What is FlashFire? I'm new to this, I had a Samsung S3 earlier so CWM was the king. Also, I get notifications for software updates but it just won't download. Even after unrooting and factory reset.
Click to expand...
Click to collapse
Flashfire is a tool that can flash zip / backup ur phone without unlocking bootloader or install custom recovery.. So u can install xposed.zip.. But there is no one try it for x9009 oppo f1 plus.. Make sure u check ur hardware info first so u download the right thing for ur phone if arm64 u must download for arm64.. Do it on ur own risk..
Just tried, its not working with Flashfire
theobeaudenon said:
Just tried, its not working with Flashfire
Click to expand...
Click to collapse
Rooted stockrom , arm64 xposed and flashfire? Makes ur device brick?
kazuya_gonzalez said:
Rooted stockrom , arm64 xposed and flashfire? Makes ur device brick?
Click to expand...
Click to collapse
No brick, no bugs but xposed app do not detect it
There was a link for TWRP in the YouTube video. Anyone tried? If you want to try it's in Chinese but TWRP has a translate option.
I am now able to get OTA after 5th factory reset.
Ron1209 said:
There was a link for TWRP in the YouTube video. Anyone tried? If you want to try it's in Chinese but TWRP has a translate option.
I am now able to get OTA after 5th factory reset.
Click to expand...
Click to collapse
Any link and tutorial ?
Link for TWRP - pan.baidu.com/s/1qXNnLdq#path=%252Fandroid%252F%25E7%25AC%25AC%25E4%25B8%2589%25E6%2596%25B9ROM%252FOPPO%2520R9m%252Ftwrp%2520recovery
Ron1209 said:
Link for TWRP - pan.baidu.com/s/1qXNnLdq#path=%252Fandroid%252F%25E7%25AC%25AC%25E4%25B8%2589%25E6%2596%25B9ROM%252FOPPO%2520R9m%252Ftwrp%2520recovery
Click to expand...
Click to collapse
Just made it !!
I used this link : https://ce398c.lt.yunpan.cn/lk/cPi8mZgDBbGRk
and xposed-v86-sdk22-arm64.zip
theobeaudenon said:
Just made it !!
I used this link : https://ce398c.lt.yunpan.cn/lk/cPi8mZgDBbGRk
and xposed-v86-sdk22-arm64.zip
Click to expand...
Click to collapse
Hmm thanks for confirming it is work
theobeaudenon said:
Just made it !!
I used this link : https://ce398c.lt.yunpan.cn/lk/cPi8mZgDBbGRk
and xposed-v86-sdk22-arm64.zip
Click to expand...
Click to collapse
Please share the whole method. Thank you.
Another thing, the link I sent has an unofficial cm12.1 link for our device. Can someone please check that as well?

google app on cm

so i have installed cm 13 on my galaxy tab 2, so i have wipe all my systeme to not have any bug but i also don't have anymore all the google app and when i try to install somethink like the play store it doesn"t work because the tell me that my version of android is not up to date
when i check in the information they say that i have android 6.0 but i feel that it's not really true
i also tryed to install all the app with open-gapps but when i reboot the tab it keep preparing the application for hours
there is any tools that can upgrade my tab to android 6.0 or to get back all my google app ?
i have also an other probleme, since i hae installed cm 13 i don't have anymore sound on my tab, what can i do to fix it
i'm sorry for my bad english, i just started to install custom rom and i 'm kind of lost
thanks for your help
smartise said:
so i have installed cm 13 on my galaxy tab 2, so i have wipe all my systeme to not have any bug but i also don't have anymore all the google app and when i try to install somethink like the play store it doesn"t work because the tell me that my version of android is not up to date
when i check in the information they say that i have android 6.0 but i feel that it's not really true
i also tryed to install all the app with open-gapps but when i reboot the tab it keep preparing the application for hours
there is any tools that can upgrade my tab to android 6.0 or to get back all my google app ?
i have also an other probleme, since i hae installed cm 13 i don't have anymore sound on my tab, what can i do to fix it
i'm sorry for my bad english, i just started to install custom rom and i 'm kind of lost
thanks for your help
Click to expand...
Click to collapse
sounds like you didnt run the latest twrp or wrong gapps package
smart-t78 said:
sounds like you didnt run the latest twrp or wrong gapps package
Click to expand...
Click to collapse
what is twrp ? sorry i just began
smartise said:
what is twrp ? sorry i just began
Click to expand...
Click to collapse
twrp is the recovery of the tab. also cwm or philz touch are recoverys. what are you using??
I use Philz touch but i have installed an old one because I downloaded it from a tutorial on YouTube
So I need to install an other ?
smartise said:
I use Philz touch but i have installed an old one because I downloaded it from a tutorial on YouTube
So I need to install an other ?
Click to expand...
Click to collapse
yes.
use the latest common twrp from android-andi http://andi34.github.io/recoveries_tab2.html
download version 3.0.2-8 as zip. you can install it with philz touch.
then reboot back into recovery and reinstall rom and gapps. DONE
smart-t78 said:
yes.
use the latest common twrp from android-andi http://andi34.github.io/recoveries_tab2.html
download version 3.0.2-8 as zip. you can install it with philz touch.
then reboot back into recovery and reinstall rom and gapps. DONE
Click to expand...
Click to collapse
thanks a lot it's working now but i still have some probleme
audio.fx isn't working it's all the time crashing and also i can't read video on youtube they keep telling me that there was a probleme while playing
i have also no song at all when i look a video on my sd i guess i's cause of audio.fx

[Video][How-To]Fix Unable To mount /system while installing a ROM

This is a Video TUT on How to fix Unable To Mount /System Partiton
While Flashing A Rom:-
In The Video I have used the Multi-Rom TWRP 3.0.0 but this problem occurred with every Version
Watch the video - Video Starting is About the problem and then the solution to flash roms bypassing this prob.
*This is My First video so ignore Mistakes i made:silly:
Use EarPhone For Best Sound
Proper Method To -Install a rom From TWRP Follow:-
1).Reboot Into recovery [Obviously]
2).Select Wipe-AdvanceWipe-and select Dalvik,Cache,System,Data and Swipe the slider to wipe
3) Then Follow the Procedure i mentioned in video above
4).Then install Any Rom u want
Note:- This is not a permanent fix you have to follow the same procedure every time you want to install the ROM
THANKS To
XDA-Devs
@Sheref (for asking a Video Tut)
@GautamMaini (For Video and Thread)
Do Hit Thanks Button If I Helped It Encourages ME
Reserved Waiting For Video to Upload
Very helpful bro:good:
Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.
Sheref said:
Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.
Click to expand...
Click to collapse
What it is
Gautam Maini said:
What it is
Click to expand...
Click to collapse
I'm using old twrp 2.7..1...
Select wipe and select system and then select repair or change file system(something like that)and change the system partition ext4 to ext3 and wipe ,done .install ROM . now I flashed baiducloud os and it successfully installed and booted.
Sry for my bad English
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
First Wipe system then restart recovery with no os installed. Then mount system and install rom !
Otherwise
Update to latest twrp
aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Thanks!!! You Are great
TheAndroidMods said:
Thanks!!! You Are great
Click to expand...
Click to collapse
Pleasure Helping
Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
thanks bro u saved the day
aniket_anky said:
thanks bro u saved the day
Click to expand...
Click to collapse
Welcome bro. :good::laugh:
Thanks a Core!
Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core
zooperaj said:
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core
Click to expand...
Click to collapse
Thanks bro.
32bit also not worked for me , idk why. Thanks for trying it. :angel: :angel::angel::angel:
hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .
[email protected] said:
hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .
Click to expand...
Click to collapse
Don't mess
Gautam Maini said:
Don't mess
Click to expand...
Click to collapse
you mean its impossible to do so
[email protected] said:
you mean its impossible to do so
Click to expand...
Click to collapse
Yes you can say . Repartition can lead to derious damage

[Recovery]TWRP for the Galaxy C7 [SM-C7000]

TWRP has come to the SM-C7000!
In order to install this, follow these instructions:
Enable OEM Unlock in developer settings
Enter download mode (Press and hold home + volDown + Power when powered off)
Using Odin, click the 'AP' tab and select the recovery.tar file you've downloaded.
Flash the TWRP image, then hold home + volUp + Power
Congratulations, you are now booted into TWRP!
Remember, on the stock ROM, dm-verity is enabled. What does this mean? If you swipe to allow system modifications, you must flash something that disables dm-verity (such as magisk or a dm-verity disabler.)
Also, on the stock ROM, you MUST format /data before performing any actions, due to the fact that it is force-encrypted by default.
BUGS:
None, as far as I'm aware of.
https://drive.google.com/file/d/1fQRIR_fa7MaHTIT-4ta13477mo-Ir-Ey/view
XDA:DevDB Information
TWRP for c7ltechn, Tool/Utility for the Samsung Galaxy C7
Contributors
wzedlare and minz1
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created 2017-10-07
Last Updated 2018-01-04
Thank you very much @wzedlare..
TWRP Recovery for Samsung Galaxy C7 (SM-C7000) was being waited by lots of C7 owners. We hope you fix all the issues and make it a flawless file. You can also collaborate with @javad0644 to make it even better.. He had developed a root file for C7 before..
Keep up this good work..
(Note: Except the first two pictures in the OP you have uploaded, the other pictures are broken. We can't see them. Can you please upload them again?)
lawyer_06 said:
Thank you very much @wzedlare..
TWRP Recovery for Samsung Galaxy C7 (SM-C7000) was being waiting by lots of C7 owners. We hope you fix all the issues and make it a flawless file. You can also collaborate with @javad0644 to make it even better.. He had developed a root file for C7 before..
Keep up this good work..
(Note: Except the first two pictures in the OP you have uploaded, the other pictures are broken. We can't see them. Can you please upload them again?)
Click to expand...
Click to collapse
Thanks.I have already been in contact with javad.There are only 2 pictures, there are no other pictures in the thread.
Build 14.10.2017:
Code:
* MTP issue is fixed.You can use MTP now.
Hello excelent work
thanks for work, Thank you very much, excellent work thanks to people like you, we can enjoy new things in our device, thank you very much, a hug and if I can in any way contribute to the creation of a personalized Rom, or send some money to q you think it would be exceptional of you
thank you very much bro , hope you create some bigger works like custom roms. ?
---------- Post added at 06:09 PM ---------- Previous post was at 05:29 PM ----------
hey guys help me i cant take a backup
it cant read the memory at all
Rkd2000 said:
thank you very much bro , hope you create some bigger works like custom roms.
---------- Post added at 06:09 PM ---------- Previous post was at 05:29 PM ----------
hey guys help me i cant take a backup
it cant read the memory at all
Click to expand...
Click to collapse
Because your data is encrypted.Please read the whole thread.
wzedlare said:
Because your data is encrypted.Please read the whole thread.
Click to expand...
Click to collapse
Can you explain for me how can i solve it please
Rkd2000 said:
Can you explain for me how can i solve it please
Click to expand...
Click to collapse
its can not be fix for now...
Costom rom
Thanks for this hard work
I haven't used this method yet
I'm really waiting for a stable costom rom based on lineage os ??
installed on my c7
i have installed on my c7000 hongkong firmware model. flashed with twrp with auto reboot off. restarted into twrp ,swipe to allow modification but it failed to mount storage. then i did factory reset in twrp and type yes. it removed all the data after that it asked me to install twrp and reboot. (it gives you options in twrp upon factory reset) did that and rebooted again in twrp . this time every thing is working good. mounted storage . after that put the supersu zip file on mobile via usb cable and installed through twrp install option then i installed (no-verity-opt-encrypt-3.1.zip) i dont know is it necessary or not but i installed it . rebooted now my mobile is rooted and twrp recovery is working fine.
only problem i got is that private mode is not working now. xD
thanks for making twrp to work :good:
koolguy0000 said:
i have installed on my c7000 hongkong firmware model. flashed with twrp with auto reboot off. restarted into twrp ,swipe to allow modification but it failed to mount storage. then i did factory reset in twrp and type yes. it removed all the data after that it asked me to install twrp and reboot. (it gives you options in twrp upon factory reset) did that and rebooted again in twrp . this time every thing is working good. mounted storage . after that put the supersu zip file on mobile via usb cable and installed through twrp install option then i installed (no-verity-opt-encrypt-3.1.zip) i dont know is it necessary or not but i installed it . rebooted now my mobile is rooted and twrp recovery is working fine.
only problem i got is that private mode is not working now. xD
thanks for making twrp to work :good:
Click to expand...
Click to collapse
So you can use your data even if you reboot to system? I tried verity zip but it didnt work for me(stock rom still encrypted my data).It is just weird, maybe supersu zip made it possible.
wzedlare said:
So you can use your data even if you reboot to system? I tried verity zip but it didnt work for me(stock rom still encrypted my data).It is just weird, maybe supersu zip made it possible.
Click to expand...
Click to collapse
i did the whole method in twrp . after wiping my data mounting storage started working. if you connect mobile to computer via usb (when you are in twrp recovery) the computer will show you your mobile drive so u can put zip files.
i can send you the files if u want them.
koolguy0000 said:
i did the whole method in twrp . after wiping my data mounting storage started working. if you connect mobile to computer via usb (when you are in twrp recovery) the computer will show you your mobile drive so u can put zip files.
i can send you the files if u want them.
Click to expand...
Click to collapse
I know about mtp(I tried it as I'm the dev.I just couldnt disable verity, please send your supersu and verity zips from pm and I will also try them in my spare time, thanks.
Any solution bro? i hope in you to fix it
Request For Galaxy C7 Pro TWRP Recovery
Dear Sir Kindly Upload TWRP Recovery For Samsung Galaxy C7 (SM-C7010).
Twrp for android 7 with default Hong Kong Rom
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Parsa1996 said:
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Click to expand...
Click to collapse
Hi no DO NOT use this TWRP on china rom
Google play
Parsa1996 said:
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Click to expand...
Click to collapse
hello if you are still trying to find a way to ut the play store in the china rom of android 7...here is a apk for installing google play http://itechify.com/2016/11/10/download-google-installer-apk-chinese-phones/
JohnnyMwanza said:
hello if you are still trying to find a way to ut the play store in the china rom of android 7...here is a apk for installing google play http://itechify.com/2016/11/10/download-google-installer-apk-chinese-phones/
Click to expand...
Click to collapse
Hi DO NOT use THIS app DIDNT WORKS

Categories

Resources