Change CID S ON - HTC U12+ Questions & Answers

Hello! I encountered a problem while replacing the CID (622 to 001) . CID changed to 001, I flashed RUU for 001. But I cannot enter in system, I constantly get into the bootloader and see this message: But when boot to android error "Security Error
This phone has been flashed with unauthorized software & is locked. "

Have you tried booting into twrp recovery?
---------- Post added at 11:14 PM ---------- Previous post was at 10:37 PM ----------
It looks like something similar has happen to other people before on different HTC devices.
When they attempt to change their CID to something different and flash an RUU they trip the phones security partition or corrupt their board information. The only way is to boot into twrp recovery and rewrite your corrupt partition.
If your IMEI is blank then its a similar situation this this guy on his thread .
fastboot getvar IMEI
If its blank then your issue is same as his.
You'll need to get someone with the same HTC U12 Model and rewrite whatever corrupt partition you have. My guess is maybe board_info if your IMEI is missing.

Hello, changing the area is a need to modify the CID and MID. Did you only modify the CID without modifying the MID? Your current problem is more serious. If you can't get RUU, then you can't enter the system and temporarily S-OFF again. You can check if someone else has a TWRP backup. Try to restore other people's backups to see if they can enter the system.

Yes I changed only CID

JR 2007 said:
Yes I changed only CID
Click to expand...
Click to collapse
You have to enter the system to use the temporary soff software, you can refer to
https://forum.xda-developers.com/htc-u11/development/to-modify-cid-mid-s-devices-t3771570
in the twrp to try to change back to the original CID, then RUU after sOff to change the CID, MID, U12 and U11 partition may be different, can be in 12 Look at the partition list in the section of the section.

JR 2007 said:
Yes I changed only CID
Click to expand...
Click to collapse
cnhope said:
You have to enter the system to use the temporary soff software, you can refer to
https://forum.xda-developers.com/htc-u11/development/to-modify-cid-mid-s-devices-t3771570
in the twrp to try to change back to the original CID, then RUU after sOff to change the CID, MID, U12 and U11 partition may be different, can be in 12 Look at the partition list in the section of the section.
Click to expand...
Click to collapse
I changed CID without temp S-Off but changing to original CID might be a good chance to see if that will bring it back up.

As it turned out, I had a problem with IMEI. I changed my CID to the original 622 and wrote IMEI through the editor. But this did not work.

RiceDie said:
I changed CID without temp S-Off but changing to original CID might be a good chance to see if that will bring it back up.
Click to expand...
Click to collapse
After changed the CID with the original 622, the phone is restored.Thank you very much

RiceDie said:
I changed CID without temp S-Off but changing to original CID might be a good chance to see if that will bring it back up.
Click to expand...
Click to collapse
Hol, I have the same problem with my u12 +, how did you change the cid without s-off ??

Related

What is super cid

I'm in the process of doing s off on my sensation and I was wondering what super cid is ...also can you do s off flash a custom recovery and flash a custom rom without super c I d
Sent from my HTC Sensation 4G using XDA Premium App
Super CID "allows you to flash ANY ROM to the device regardless of the carrier" (taken straight from the S-OFF sticky). You can certainly S-OFF, install custom recovery, and begin flashing custom ROMs without Super CID, but you will be limited in your choice of ROMs to those that are the same carrier as you have. Acquire Super CID and you're more or less free to flash whatever ROMs you want from the dev section.
Jesushasadroid said:
I'm in the process of doing s off on my sensation and I was wondering what super cid is ...also can you do s off flash a custom recovery and flash a custom rom without super c I d
Sent from my HTC Sensation 4G using XDA Premium App
Click to expand...
Click to collapse
CID is the Country Identifier, a code which is stored on your phone and software uses to determine which country or region the phone is for. HTC updates, for example, use it to determine (among other things) which languages to install.
SuperCID is a special code, 11111111, which means that software from any region can be installed.
While SuperCID may seem handy, note that if you are only interested in debranding your phone, the OTA (over the air) updates which HTC sends will not be available for your phone, since there is no specific region defined. So, in such cases, you should choose a specific CID for your region.
super cid change
can u pls direct me on how to change my super cid to a specific cid.ASP PLS.:fingers-crossed:
sowen222 said:
CID is the Country Identifier, a code which is stored on your phone and software uses to determine which country or region the phone is for. HTC updates, for example, use it to determine (among other things) which languages to install.
SuperCID is a special code, 11111111, which means that software from any region can be installed.
While SuperCID may seem handy, note that if you are only interested in debranding your phone, the OTA (over the air) updates which HTC sends will not be available for your phone, since there is no specific region defined. So, in such cases, you should choose a specific CID for your region.
Click to expand...
Click to collapse
albabs said:
can u pls direct me on how to change my super cid to a specific cid.ASP PLS.:fingers-crossed:
Click to expand...
Click to collapse
are you on S-OFF?
if yes then connect your device from bootloader to pc(in the hboot screen should say fastboot usb)
open a cmd window in your adb and fastboot folder and type
fastboot oem writecid <<name of cid>>
fastboot getvar cid(to cinfirm that your cid has chnaged)
rzr86 said:
are you on S-OFF?
if yes then connect your device from bootloader to pc(in the hboot screen should say fastboot usb)
open a cmd window in your adb and fastboot folder and type
fastboot getvar cid(just to know your current cid-> write it somewhere if you want)
fastboot oem writecid 11111111
fastboot getvar cid(to cinfirm that your cid has chnaged)
Click to expand...
Click to collapse
Mate i think he was asking about other cid not supercid (probably he is now on supercid )
Mile_zdr said:
Mate i think he was asking about other cid not supercid (probably he is now on supercid )
Click to expand...
Click to collapse
you are right
i am editing my post
rzr86 said:
are you on S-OFF?
if yes then connect your device from bootloader to pc(in the hboot screen should say fastboot usb)
open a cmd window in your adb and fastboot folder and type
fastboot oem writecid <<name of cid>>
fastboot getvar cid(to cinfirm that your cid has chnaged)
Click to expand...
Click to collapse
A tiny small little thing:
fastboot oem writecid <<name of cid>>
fastboot reboot bootloader
fastboot getvar cid
Happy to help.
Super CID is just use for flashing any custom Rom that I want?or it is useful for flashing any RUU too?
for change the CID,I dont know the CID of my region or the CID of the ROM's region that I want to flash,I know the name of region,but CID shoud be 8-characters code of region,can anyone direct me to the thread that collected all of CIDs of the countries??...thank you
hasti.fa20 said:
Super CID is just use for flashing any custom Rom that I want?or it is useful for flashing any RUU too?
for change the CID,I dont know the CID of my region or the CID of the ROM's region that I want to flash,I know the name of region,but CID shoud be 8-characters code of region,can anyone direct me to the thread that collected all of CIDs of the countries??...thank you
Click to expand...
Click to collapse
supercid is only for flashing any kind of ruu.exe
it isn't necessary for custom roms
also see here
http://forum.xda-developers.com/showthread.php?t=1195475
rzr86 said:
supercid is only for flashing any kind of ruu.exe
it isn't necessary for custom roms
also see here
http://forum.xda-developers.com/showthread.php?t=1195475
Click to expand...
Click to collapse
So, if I have supercid I can flash any ruu? I have a att HTC one x+ evitare..which ruu's can I flash then? Also, does bootloader need to be relocked?
Tmobilefan906 said:
So, if I have supercid I can flash any ruu? I have a att HTC one x+ evitare..which ruu's can I flash then? Also, does bootloader need to be relocked?
Click to expand...
Click to collapse
if you want to supercid you must be on S-OFF first
about bootoader you don't need to relock it if you are on S-OFF
by the way why are you asking here and not in your device's thread?
rzr86 said:
if you want to supercid you must be on S-OFF first
about bootoader you don't need to relock it if you are on S-OFF
by the way why are you asking here and not in your device's thread?
Click to expand...
Click to collapse
Sorry. Nobody was answering in other
---------- Post added at 08:20 PM ---------- Previous post was at 08:16 PM ----------
rzr86 said:
if you want to supercid you must be on S-OFF first
about bootoader you don't need to relock it if you are on S-OFF
by the way why are you asking here and not in your device's thread?
Click to expand...
Click to collapse
I am s off. But beginning to think not. Bl says s off and so does getvar all.... but still need to fastboot boot.img. Device came "s off" it was a preleased HTC one x
Tmobilefan906 said:
Sorry. Nobody was answering in other
---------- Post added at 08:20 PM ---------- Previous post was at 08:16 PM ----------
I am s off. But beginning to think not. Bl says s off and so does getvar all.... but still need to fastboot boot.img. Device came "s off" it was a preleased HTC one x
Click to expand...
Click to collapse
so you are saying you flashed a custom rom and ended it up with a bootloop?
rzr86 said:
so you are saying you flashed a custom rom and ended it up with a bootloop?
---------- Post added at 10:54 PM ---------- Previous post was at 10:52 PM ----------
did you try a custom rom?
Click to expand...
Click to collapse
Yea. Had bootloop..but I went ahead and fastboot flashed boot.img. I thought the whole idea on flashing boot.img was cuz at the time rom was made, it was intendeded for s on devices.
When I bought the phones that's first thing I did was getvar all to see the specs. It came"s off" with locked bl. So I unlocked bootloader and checked getvar again and it said unlocked and s off. IDK why I had to fastboot the boot.img. Could the s off status be a lie? Lol
See attached
Tmobilefan906 said:
Yea. Had bootloop..but I went ahead and fastboot flashed boot.img. I thought the whole idea on flashing boot.img was cuz at the time rom was made, it was intendeded for s on devices.
When I bought the phones that's first thing I did was getvar all to see the specs. It came"s off" with locked bl. So I unlocked bootloader and checked getvar again and it said unlocked and s off. IDK why I had to fastboot the boot.img. Could the s off status be a lie? Lol
Click to expand...
Click to collapse
i don't think S-OFF is a lie
maybe you are using the wrong recovery for that rom
rzr86 said:
i don't think S-OFF is a lie
maybe you are using the wrong recovery for that rom
Click to expand...
Click to collapse
No. It flashed correctly.
Tmobilefan906 said:
No. It flashed correctly.
Click to expand...
Click to collapse
i can't think something else then
i assume you can boot in the rom after flashing the boot.img
rzr86 said:
i can't think something else then
i assume you can boot in the rom after flashing the boot.img
Click to expand...
Click to collapse
Yes

remove supercid??

Back when i first got my phone i did the supercid mod on my phone, everytime i flash a rom i have to do other things just because of it (larger mms, install wifi calling patch etc etc) my girlfriends sensation on the other hand is NOT supercid and she never has to do any of the additional patches i have to do.
So is there any way i can reverse the supercid mod on my phone?
Super CID has nothing to do with patch flashing, but if you want to return to stock cid just fallow the steps to get the super cid and replace "11111111" with your original cid.
If your phone was unbranded your cid should be "HTC__001"
_HTC_DHD_ said:
Super CID has nothing to do with patch flashing, but if you want to return to stock cid just fallow the steps to get the super cid and replace "11111111" with your original cid.
If your phone was unbranded your cid should be "HTC__001"
Click to expand...
Click to collapse
how do i know what my original cid would be?
Hello well if you you know how to use the adb command tool (black window with command line) you just type in "adb getvar cid" and it should show your original cid hope I could help
Edit: use while phone is connected with USB debugging on
I AM M07S said:
Hello well if you you know how to use the adb command tool (black window with command line) you just type in "adb getvar cid" and it should show your original cid hope I could help
Edit: use while phone is connected with USB debugging on
Click to expand...
Click to collapse
That is wrong. If you use that, i'll only show the CURRENT CID of the phone, which would be superCID in this case.
There's a CID database somewhere in the development section. Search for it. It has a comprehensive list of CIDs with your carriers name.
illuminarias said:
That is wrong. If you use that, i'll only show the CURRENT CID of the phone, which would be superCID in this case.
There's a CID database somewhere in the development section. Search for it. It has a comprehensive list of CIDs with your carriers name.
Click to expand...
Click to collapse
Oh well I'm sorry but last time I did this it gave me my original and I know this because I have changed it to SuperCID and last night infact I was playing with the adb commands and it gave me my original CID unless of course it has gone back to the original which in that case i am really sorry for being a noob to the android xda community (but im only 17)
If you are on T-Mobile US, then the CID is T-MOB010.
Sent from my HTC Sensation Coredroid 2.7
Try this...
Hi,
I had problems with WIFI calling not installing, so I decided to remove SuperCID. I followed the instructions in this post:
http://forum.cyanogenmod.com/topic/31756-wifi-calling-missing-you-have-supercid-here-is-a-solution/
I didn't use the file from the post, as it didn't work for me. I found another file and everything worked perfectly, I am attaching the new file.
Please be aware that this will get you ENG S-OFF.
cgjjaf said:
Hi,
I had problems with WIFI calling not installing, so I decided to remove SuperCID. I followed the instructions in this post:
http://forum.cyanogenmod.com/topic/31756-wifi-calling-missing-you-have-supercid-here-is-a-solution/
I didn't use the file from the post, as it didn't work for me. I found another file and everything worked perfectly, I am attaching the new file.
Please be aware that this will get you ENG S-OFF.
Click to expand...
Click to collapse
Thanks for the help, it's ****ing monday morning and i feel dumb, but what is ENG S-OFF?
I unlocked my phone using xda guide, at the moment I have super cid, if I reverse my cid back to original, will I loose my unlock?
raul602 said:
Thanks for the help, it's ****ing monday morning and i feel dumb, but what is ENG S-OFF?
Click to expand...
Click to collapse
engineering bootloader with security off..basically meaning you have read/write permissions for the system and can flash a custom rom..Since you changed your CID, you also should be S-OFF.
However, I don't think you fully understand what CID does, b/c I don't see how this would cause the issues your having. Super CID allows for you to flash a STOCK rom from another carrier, so you could flash an unbranded Sensation RUU or a TMo-US S4G RUU, or whatever, through bootloader. It allows to "debrand" your phone, meaning you're not stuck to your carrier specific rom. This is different than flashing a custom rom thru recovery, which your CID doesn't matter, bc custom roms are not carrier specific roms..
CID is basically just a variable that tells the RUU what carrier your phone is from and what rom can be flashed on it.
Now, to get your CID back to stock, do the following:
Connect to ADB, run "adb reboot-bootloader"
Then enter the command "fastboot oem writecid 11111111", except put your carriers CID in place. If you do not know your CID, refer to this thread http://forum.xda-developers.com/showthread.php?t=1195475
Then run "fastboot reboot-bootloader" and then "fastboot getvar cid" to verify it successfully changed.
Hope that cleared things up some.
bakili said:
I unlocked my phone using xda guide, at the moment I have super cid, if I reverse my cid back to original, will I loose my unlock?
Click to expand...
Click to collapse
No it will not..CID is basically just a variable, you need to have S-OFF to change it, but changing it won't effect S-OFF or SIM unlock..
civicvx94 said:
engineering bootloader with security off..basically meaning you have read/write permissions for the system and can flash a custom rom..Since you changed your CID, you also should be S-OFF.
However, I don't think you fully understand what CID does, b/c I don't see how this would cause the issues your having. Super CID allows for you to flash a STOCK rom from another carrier, so you could flash an unbranded Sensation RUU or a TMo-US S4G RUU, or whatever, through bootloader. It allows to "debrand" your phone, meaning you're not stuck to your carrier specific rom. This is different than flashing a custom rom thru recovery, which your CID doesn't matter, bc custom roms are not carrier specific roms..
CID is basically just a variable that tells the RUU what carrier your phone is from and what rom can be flashed on it.
Now, to get your CID back to stock, do the following:
Connect to ADB, run "adb reboot-bootloader"
Then enter the command "fastboot oem writecid 11111111", except put your carriers CID in place. If you do not know your CID, refer to this thread http://forum.xda-developers.com/showthread.php?t=1195475
Then run "fastboot reboot-bootloader" and then "fastboot getvar cid" to verify it successfully changed.
Hope that cleared things up some.
No it will not..CID is basically just a variable, you need to have S-OFF to change it, but changing it won't effect S-OFF or SIM unlock..
Click to expand...
Click to collapse
First of all, thank you very much for your response, I really didn't know exactly what it was till you explained it, THe reason i want to revert back to stock is simply because there are certain things that never seem to work on my phone that always work perfectly on my girlfriends phone, first one being WIFI(never gets installed and second being small mms pics, the ONLY difference between her and my phone is that i am superCID and she is not, i can get the patches and fix it but i don't really need supercid now that i understand it.
Seriously though, thank you!
No problem at all, glad to help! Hope you get things figured out..

[Q] PG58IMG.zip can't be installed

My hboot version is 1.23, s-on. My phone can't install PG58IMG.zip, bootloader always shows no image or wrong image, i tried different zip file but non of them works. I know this has a close relationship with s on. But what can i do? I would appriciate if you could give me some advice.
Problem is my phone can't boot into system,
pmbldc said:
My hboot version is 1.23, s-on. My phone can't install PG58IMG.zip, bootloader always shows no image or wrong image, i tried different zip file but non of them works. I know this has a close relationship with s on. But what can i do? I would appriciate if you could give me some advice.
Click to expand...
Click to collapse
Hi,
What exactly are you trying to do?
malybru said:
Hi,
What exactly are you trying to do?
Click to expand...
Click to collapse
My phone can't boot into system and now s-on, so i want to do something to make it work
pmbldc said:
My phone can't boot into system and now s-on, so i want to do something to make it work
Click to expand...
Click to collapse
Hi,
Were you s-off before?
What did you flash to make you s-on?
Last night I unlocked the bootloader n been having the same problem but mind say S-on n I don't know what's next
Sent from my HTC Sensation 4G using XDA App
? im at a lost here little more detail
what did you use to unlock bootloader?
where you ever s-off?
where you rooted?
why did you flash the IMG.zip?
if you unlocked it then go to fastboot and make your CID 11111
and hopefully that will get you back on where you wanted to do?
cant give much help unless you give some details on what was your state of phoen before and what you wanted to do with it
ilostchild said:
? im at a lost here little more detail
what did you use to unlock bootloader?
where you ever s-off?
where you rooted?
why did you flash the IMG.zip?
if you unlocked it then go to fastboot and make your CID 11111
and hopefully that will get you back on where you wanted to do?
cant give much help unless you give some details on what was your state of phoen before and what you wanted to do with it
Click to expand...
Click to collapse
I have similar problem, hboot 1.20, was S-OFF, flashed orig RUU ICS,changed CID to HTC___001 than I made stupid mistake and changed back to S-ON (wanted to send my phone to the shop, problems with reception and sound quality) now only ROM that my phone accepts is LeeDroid 5.01, cant change cid to supercid via fastboot some error SMART_IO.CRD not found on sdcard. Tried to flash orig RUU (1.45, 1.29, ICS etc.) error 155 when hboot is locked and error 132 signarure error when relocked. Also tried changing android-info.txt to my cid and mid no luck, tried flashing via RUU and bootloader no luck.
Any help would be appreciated
malybru said:
Hi,
Were you s-off before?
What did you flash to make you s-on?
Click to expand...
Click to collapse
Sorry to reply so late.
Previously, my phone was eng s-off and got super cid.
After i flash ICS firmware, bootloader was then locked.
After that i did some stupid things, the bootloader turned into "locked", "security warning" and s-on. I succeeded to unlock bootloader by htcdev and get rid of "security warning", at that time i can boot into recovery normally and wipe or flash roms. But it just can't boot into system. I tried fastboot commands to flash but failed just because "it is not allowed in the remote devices".
i tried PG58IMG files but the bootloader shows no image or wrong image.
Can you give me some advice? Thank you very much
ilostchild said:
? im at a lost here little more detail
what did you use to unlock bootloader?
where you ever s-off?
where you rooted?
why did you flash the IMG.zip?
if you unlocked it then go to fastboot and make your CID 11111
and hopefully that will get you back on where you wanted to do?
cant give much help unless you give some details on what was your state of phoen before and what you wanted to do with it
Click to expand...
Click to collapse
My phone had been rooted and end s-off before things happened.
i flash IMG.zip to try to flash a rom( Somebody post that ICS rom can be flash by IMG.zip) or fix the bootloader problem. It's almost the only way to flash a rom for me
I checked the cid and it is still 11111111(Got super cid before) although bootloader is s-on.
Now the state of the bootloader is
1, unlocked
2,s-on
3,cid is 11111111
4,can boot into recovery
5,can't install PG58IMG.zip
6,fastboot command can't write anyting
7,if flash some rom, phone will be stuck at the splash screen which seems splash partition is writable
Thank you!
greenhtc982 said:
I have similar problem, hboot 1.20, was S-OFF, flashed orig RUU ICS,changed CID to HTC___001 than I made stupid mistake and changed back to S-ON (wanted to send my phone to the shop, problems with reception and sound quality) now only ROM that my phone accepts is LeeDroid 5.01, cant change cid to supercid via fastboot some error SMART_IO.CRD not found on sdcard. Tried to flash orig RUU (1.45, 1.29, ICS etc.) error 155 when hboot is locked and error 132 signarure error when relocked. Also tried changing android-info.txt to my cid and mid no luck, tried flashing via RUU and bootloader no luck.
Any help would be appreciated
Click to expand...
Click to collapse
i don't know how to do either, but during solving my problem, i found something may be useful. If you want to unlock bootloader you can try htcdev. This can't s-off but just unlock bootloader.
And since your hboot is 1.20, you can try the zip file attached by this link http://forum.xda-developers.com/showpost.php?p=20681060&postcount=22.
Because my hboot is 1.23 and isn't supported according to the above link, i didn't know whether it will help or not. You can take it into consideration
Hope you can solve your problem
ok find hboot 1.17 PD58IMG.zip, your truly not s-on, format your sdcard, then place the img in sdcard, and boot into bootloader, and you should be able run fastboot commands, you should still have custom recovery right?
ilostchild said:
ok find hboot 1.17 PD58IMG.zip, your truly not s-on, format your sdcard, then place the img in sdcard, and boot into bootloader, and you should be able run fastboot commands, you should still have custom recovery right?
Click to expand...
Click to collapse
I format the sdcard in fat32 format and place img that revert to hboot 1.17 in sdcard. Reboot into bootloader, but it shows "no image or wrong image".
I also try fastboot command but i don't know the command format. Would you give me an example please? Just a fastboot command to install img no matter s-on or s-off. Such as "fastboot flash hboot hboot.img".
My device is now s-on.
pmbldc said:
i don't know how to do either, but during solving my problem, i found something may be useful. If you want to unlock bootloader you can try htcdev. This can't s-off but just unlock bootloader.
And since your hboot is 1.20, you can try the zip file attached by this link http://forum.xda-developers.com/showpost.php?p=20681060&postcount=22.
Because my hboot is 1.23 and isn't supported according to the above link, i didn't know whether it will help or not. You can take it into consideration
Hope you can solve your problem
Click to expand...
Click to collapse
Thanks for the link, but i tried that already, I've read whole bunch of treads and tried everything i can think off but nothing seems to work. Problem is S-on and with hboot 1.20 locked or unlocked i cant flash any rom except leedroid.
greenhtc982 said:
Thanks for the link, but i tried that already, I've read whole bunch of treads and tried everything i can think off but nothing seems to work. Problem is S-on and with hboot 1.20 locked or unlocked i cant flash any rom except leedroid.
Click to expand...
Click to collapse
You mean you can flash leedroid now, don't you?
Can you boot into system?
pmbldc said:
You mean you can flash leedroid now, don't you?
Can you boot into system?
Click to expand...
Click to collapse
Yes its working, but i would like to flash other ROM's
Same Problem
Hi, I can't flash PG85IMG.zip wither except that I have S-Off??

[Q] Wrong CID

Hi all,
I feel like I have looked everywhere and cannot find an answer for this. I have an at&t one x that is rooted and unlocked with a custom rom, however I somehow changed my cid from supercid 11111111 to htc__001. Is it possible to get supercid 11111111 back or at least wsc__001 so I can run the correct ruu on it.
Thank you in advance for any ideas or help
Just do s off then it will bypass cid... But I think you can do fastboot oem write cid 11111111( don't know how many ones there are)
ziolko said:
Hi all,
I feel like I have looked everywhere and cannot find an answer for this. I have an at&t one x that is rooted and unlocked with a custom rom, however I somehow changed my cid from supercid 11111111 to htc__001. Is it possible to get supercid 11111111 back or at least wsc__001 so I can run the correct ruu on it.
Thank you in advance for any ideas or help
Click to expand...
Click to collapse
fastboot eom writecid "htc__001" or whatever you want it to be minus quotations while in fastboot.
---------- Post added at 03:30 PM ---------- Previous post was at 03:29 PM ----------
a box of kittens said:
Just do s off then it will bypass cid... But I think you can do fastboot oem write cid 11111111( don't know how many ones there are)
Click to expand...
Click to collapse
there's 8 characters in the CID
You can change the CID the old "manual" method: http://forum.xda-developers.com/showthread.php?t=1671396
Or if you do S-off, you can just change the CID with a fastboot command.
Sounds like you were one of the folks that changed to the quad core CID so you can flash a ROM from that phone. Scary.
redpoint73 said:
You can change the CID the old "manual" method: http://forum.xda-developers.com/showthread.php?t=1671396
Or if you do S-off, you can just change the CID with a fastboot command.
Sounds like you were one of the folks that changed to the quad core CID so you can flash a ROM from that phone. Scary.
Click to expand...
Click to collapse
I will try the manual fix, thank you!
I did not read everything I should have in the beginning. I was trying to run a ruu back to stock and did not know I could have done that with supercid ( which I had at the time) and thought I had to change the cid back to original and mistakenly thought HTC__001 was correct. After I realized WSC__001 was actually the correct original cid and now i can't change back in fastboot without errors. I got to comfortable and got ahead of myself.......
CWS__001
Sent from my HTC One X using xda app-developers app
redpoint73 said:
You can change the CID the old "manual" method: http://forum.xda-developers.com/showthread.php?t=1671396
Or if you do S-off, you can just change the CID with a fastboot command.
Sounds like you were one of the folks that changed to the quad core CID so you can flash a ROM from that phone. Scary.
Click to expand...
Click to collapse
You don't need S-off to use the fastboot command to change it from what I understand you just need to have Super CID.
exad said:
You don't need S-off to use the fastboot command to change it from what I understand you just need to have Super CID.
Click to expand...
Click to collapse
Right but without s-off, you can only do it once, away from SuperCID. After that, you're stuck.
OP has neither s-off nor SuperCID, which means he needs the exploit.
Back at SuperCID 11111111, thank you everyone.
ziolko said:
Back at SuperCID 11111111, thank you everyone.
Click to expand...
Click to collapse
Go s-off before you do anything else. You'll thank me later.
iElvis said:
Go s-off before you do anything else. You'll thank me later.
Click to expand...
Click to collapse
S-OFF achieved , now how do I get Jelly bean or another recommended rom?
ziolko said:
S-OFF achieved , now how do I get Jelly bean or another recommended rom?
Click to expand...
Click to collapse
Just load and flash. Once you're s-off, you can flash whatever you want.
iElvis said:
Just load and flash. Once you're s-off, you can flash whatever you want.
Click to expand...
Click to collapse
Well.. anything intended for your device!!!! -_- You're gonna brick noobs talking like that lol
Went with ViperXL 3.2.6 and love it! Thanks to all who helped!

[Q] Brick or not?

HI all,
I tried to flashed the RUU but it seems that the version I flashed was lower than the one I had.
Now the screen is just black and I can not use the power + down vol to get to fastboot at all.
it will be greatly appreciated if I can get some guidance to get to the fastboot.
Cheers
What exactly did you flash? What does the phone show up on windows as? Does charge light come on when plugged into wall? Did the ruu complete? s-on or s-off?
You really didn't give much info.
Sent from my iPhone using Tapatalk
apology - duplicate post
bricked
thanks you for the response.
sorry I was not sure what info to give.
I was trying to flash RUU asia HK because I originally from STOCK turge but everytime I have a conversation my phone keep shuting down.
so I did (quoting from the instruction page):
Download HTC One X Stock Recovery
Download correct HTC One X boot.img and RUU based on CID. Download CID Getter from Google Play Store and run it, it will show your CID.
For this case, cidnum is HTC_044. The correct RUU is X.XX.707.X. Make sure you have downloaded the correct RUU.
Extract Fastboot.zip into a new folder, renamed the folder to Fastboot. Recommended to extract the folder to drive.
Copy and paste the downloaded stock recovery img and boot img into Fastboot folder.
Boot HTC One X into fastboot mode by press and hold Volume Down + Power button.
Connect your phone to the computer via USB cable.
At your computer, open up Command Prompt windows. (To OpenCommand Prompt –> Windows Logo–> Type CMD in search box –>Enter)
Type fastboot flash recovery endeavoru_recovery_signed.img , followed by fastboot reboot-bootloader and fastboot erase cache.
Once you flashed the stock recovery, continue to flash boot.img to your phone. Type fastboot flash boot boot.img, followed by fastboot reboot-bootloader and fastboot erase cache.
Now, relock the bootloader by typing fastboot oem lock, followed by fastboot reboot-bootloader and fastboot erase cache.
Your phone will restart after you have relock the bootloader.
Boot into Fastboot mode.
Double click the RUU, follow the updater instruction.
Wait the sending file to your phone, it normally takes 5-6 minutes.
Once the installation/update completes, your phone will automatically reboot.
when I last look at the details My CID is still 11111111 but status "RELOCKED" - it says also "EVITA PVT SHIP S-OFF RL"
HBOOT 2.14.0000
does this mean that I can safely run RUU:
RUU_EVITA_UL_ICS_40_S_hTC_Asia_HK_2.42.708.3_Radio_0.20os.32.09.15_10.113.32.28L_release_286715_signed.7z
If there still more things to do, would you kindly direct me to the correct link to follow.
THank you
Never mind, didn't read properly. Will edit and repost.
Sent from my Evita
---------- Post added at 10:48 PM ---------- Previous post was at 10:44 PM ----------
Your first problem is that you're flashing things that aren't intended for your device. The recovery you flashed is for the Endeavoru, you have the Evita. The second problem is it looks like you're getting your information from the wrong place, to go back to stock you don't need to flash a recovery or a boot.img, all you need to do is flash the right RUU for your device. What RUU did you already run? I need the exact filename. Does your phone power on at all? Can you reach the bootloader?
Sent from my Evita
---------- Post added at 10:51 PM ---------- Previous post was at 10:48 PM ----------
I see you're looking at all kinds of different threads at the moment, that isn't going to help because I don't think you know exactly what you're doing, you don't know what you've done, and you don't know how to recover from it. Your best bet is to stay in this thread and I'll try to help you work out what's gone wrong.
Sent from my Evita
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Radio_5.1204.162.29_release_299865_signed.exe
this is the one I ran earlier.
The progress is that I somehow manage to get to fastboot by pressing the vol down and power .
I am trying to download : RUU_EVITA_UL_JB_45_S_hTC_Asia_WWE_3.17.707.1_Radio_0.23a.32.09.29_10.128.32.34a_release_298958_signed.exe at the moment but it seems that the first download did not complete - so I am downloading again,
is this what I need to do? just run the RUU?
Cheers
ardabelati said:
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Radio_5.1204.162.29_release_299865_signed.exe
this is the one I ran earlier.
The progress is that I somehow manage to get to fastboot by pressing the vol down and power .
I am trying to download : RUU_EVITA_UL_JB_45_S_hTC_Asia_WWE_3.17.707.1_Radio_0.23a.32.09.29_10.128.32.34a_release_298958_signed.exe at the moment but it seems that the first download did not complete - so I am downloading again,
is this what I need to do? just run the RUU?
Cheers
Click to expand...
Click to collapse
U should download one that has the same radio as yrs also it will take fast download speed otherwise it will keep breaking up. t took me 4 attempts before I manage to download it yesterday (same file as one u r trying) good luck cheers!
You got seriously lucky. You ran an RUU intended for the HTC One X (codename Endeavoru), you don't have that phone. You have the HTC One XL / at&t One X (codename Evita), they're completely different phones. Note how the first RUU you ran has Endeavoru in the filename, that's bad, really bad, don't ever flash anything that doesn't have the Evita codename within the filename. If it has Evita in the filename it's for your phone, if it has anything else don't touch it, burn it, run away. Like I said, you're incredibly lucky your phone isn't bricked right now.
I can only assume that you're a bit confused and have been hopping between the two forums for these phones. In future stay within this device forum that you're posting in now, don't ever go anywhere else. You don't even need to visit other websites because, seriously, everything you'll ever need is right here within this device forum. Plus other sites don't properly distinguish between the models which causes confusion.
Anyway. The second RUU that you've listed there is perfectly fine for your phone. I can't guarantee that it's going to work though because previously running the wrong RUU could have really messed things up on your phone. But your only hope is to cross your fingers and run it now. Let me know how it all goes.
Sent from my Evita
---------- Post added 28th November 2013 at 12:12 AM ---------- Previous post was 27th November 2013 at 11:49 PM ----------
ndmuni said:
U should download one that has the same radio as yrs also it will take fast download speed otherwise it will keep breaking up. t took me 4 attempts before I manage to download it yesterday (same file as one u r trying) good luck cheers!
Click to expand...
Click to collapse
What are you talking about? He doesn't need to use an RUU with the same radio/baseband that's currently on his device, that's just wrong. Firstly the idea of an RUU is to update your device, therefore traditionally you'd be updating to a newer radio version than the one that's currently installed. With s-on you can only run an RUU that contains a firmware version that's equal to or greater than your current firmware. This user has s-off though so he can run any RUU that he wants to, including earlier ones (RUU'ing backwards). I don't know where you got the idea that you need to run an RUU with the same radio as your existing radio but it's just plain wrong, and you really shouldn't be telling people that.
Sent from my Evita
ndmuni said:
U should download one that has the same radio as yrs
Click to expand...
Click to collapse
False. With s-on, you can only run RUUs for your CID, and with the same or latter hboot and firmware number. So if you were having trouble flashing an RUU, its probably because you were s-on and trying to either flash another carrier's RUU, or an older version.
The OP is s-off, so therefore all security checks are off. He can flash the RUU for any carrier, any version. As long as its meant for our device (EVITA), of course.
Hi guys
Thank you for all the guidance.
I got the 4.1.1 on my phone now and phone is use-able. I can not thank you guys enough for the help.
After i finished RUU flash the phone detected the new firmware update. When i dowloaded and tried to update, it says that the phone has been modified and they can not run/install the update. When i checked my boot it shows :
"relocked"
cid is still 111111.
Evita pvt ship s-off RL
HBOOT: 2.14
radio : 0.23a.32.09.29
Do i need to do more installation before my phone can get the update from HTC like the one coming out from the factory?
Cheers.
Arda
Sent from my HTC One XL using Tapatalk
You need to change your CID back to the stock CID to take the OTA update.
Sent from my Evita
timmaaa said:
You need to change your CID back to the stock CID to take the OTA update.
Sent from my Evita
Click to expand...
Click to collapse
I searching in the forum about changing CID. But it seems that is all about how to change CID to 111111. Is there any tutorial to revert back to original CID?
Do i need to sort out my s-off first before changing CID?
Thank you in advance.
Regards
Arda
You said in a previous post that you're s-off. So are you s-off or s-on? Please boot into bootloader and post your bootloader details again.
Sent from my Evita
Hi Timmaa
I believe I am S-OFF - when I look at the bootloader screen it said S-OFF.
Do I need to flash anything at all to get my CID back to original?
On that note I was looking at the RedPoint73 resource guide page but I am not able to find the tutorial to make the CID back to original.
Any info is greatly appreciated.
Cheers
All you need to do is issue a fastboot command:
Code:
fastboot oem writecid xxxxxxxx
The x's represent the new CID.
Sent from my Evita
Hi Timmaa
I believe I am S-OFF - when I look at the bootloader screen it said S-OFF.
Do I need to flash anything at all to get my CID back to original?
On that note I was looking at the RedPoint73 resource guide page but I am not able to find the tutorial to make the CID back to original.
Any info is greatly appreciated. I have attached the screen shot
Cheers
I did :
fastboot oem writecid 622 but it came back with ....INFOfail: [writecid] invalid CID
I flashed the RUU_EVITA_UL_JB_45_S_hTC_Asia_WWE_3.17.707.1_Radio_0.23a.32.09.29_10.128.32.34a_release_298958_signed.exe
was the 622 number incorrect?
cheers
No, 622 isn't a CID. A correct CID consists of eight characters, that's why I put eight x's in my example. What model is your phone? You need find the right CID for your model and change it to that. You need to be more careful, you're attempting things without knowing what you're doing again, you're in serious danger of damaging your phone.
Sent from my Evita
timmaaa said:
No, 622 isn't a CID. A correct CID consists of eight characters, that's why I put eight x's in my example. What model is your phone? You need find the right CID for your model and change it to that. You need to be more careful, you're attempting things without knowing what you're doing again, you're in serious danger of damaging your phone.
Sent from my Evita
Click to expand...
Click to collapse
Hi Timmaa
My phone is HTC ONE XLTE
I use CID Getter and it came up with HTC__622, so I entered that into the fastboot command and it changed my CID but when I try to flash the new update downloaded directly through the phone it came up with the messsage below after verifying the phone.
not sure why.....( pls see attached)
So you ran the RUU.exe? You didn't extract it or anything? What have you done to the phone since then?
Sent from my Evita

Categories

Resources